PExprt 6New Features

Integrated Magnetics

Integrated Magnetics

Integrated Magnetics

Three Phase Components

Improved Thermal Calculations

Graphical representation of the Thermal Distribution

New Features in Simplorer and PSpice models

Losses (non conservative nodes)

Electrical connections (conservative nodes)

Both, instantaneous and averaged losses are provided

Connections with the thermal model Average Losses (non conservative nodes)

Inclusion of thermal calculation in Simplorer and PSpice models

Inclusion of thermal calculation in Simplorer model

Inclusion of thermal calculation in Simplorer model

Information about model type

Improved Model Generation from PExprt

“Fixed Gap” feature

Different levels for Core losses calculation

Minor Loops

Improved Link with FEA: Eddy

New Open Circuit and Short Circuit Tests in Maxwell 2D

New Post-Processor Options

New “Solve Problem” feature from PExprt

Improved Link with FEA: Eddy

LossesCurrent Density Energy Flux

Improved Link with FEA: Electrostatic

New Link with FEA: Transient

New Link with FEA: Thermal

Improved frequency spacing definition for FEA based models

Improved Chart control

Core Material Frequency Range Checking

Multi-Design Working Mode Capability

Recalculation of Winding Losses using PEmag models for multiple

designs

Recalculation of Winding Losses using FEA

List of Results Saving Capability(“My Results” list removed)

Analytical model symbol for Simplorer

PEX: FEA based model

ANL: Analytical based model

Non-linear core model for Simplorer

Blank spaces allowed in the path name

Message showing where the model has been saved

New Implementation of Simplorer models (no library needed, macros

are not used anymore)

Extension name of PExprt libraries has been changed to .pxl in order to

avoid confusions with PEmag libraries (.pml)

Simplorer (levels 3 and 4) and PSpice non-linear core model

parameters extraction feature (PEmag)

Possibility of introducing names for the bobbin pins (PEmag)

Different colors for each insulator portion (PEmag)

Selected sub-layer highlighting in the cross section area (PEmag)

Move layer feature (PEmag)

Parallel layer feature (PEmag)

Show the information about connections for each sublayer

(PEmag)

New Core Shapes: T, I and DRUM

New Core Shapes: UI

Twisted wire type (PEmag 2D)

Square wire type

Foil conductors

XY Representation for Double 2D Cores