Petrochemical Systems Corp. “PSC” Biodiesel Technology Plant.
-
Upload
barrie-lloyd -
Category
Documents
-
view
275 -
download
1
Transcript of Petrochemical Systems Corp. “PSC” Biodiesel Technology Plant.
Petrochemical Systems Corp. “PSC”
Biodiesel Technology Plant
A fuel comprised of mono-alkyl esters of long chain fatty acids derived from vegetable oils OR animal fats designated B100, and meet the requirements of ASTM D 6751.
Methyl Ester
What is Biodiesel ?
It contains no petroleum but can be blended with petroleum diesel.
It runs in diesel engines, reduces emissions, reduces oil dependence and meets Federal Standards.
Biodiesel yields 3.2 units of fuel energy whereas Petroleum Diesel yields 0.83 units of fuel energy per unit of fossil energy consumed.
Biodiesel vs. Petroleum Diesel
Biodiesel emits 78.5% less CO2 than Petroleum Diesel. The blend exhibits proportionate benefits i.e. B20 emits 15.66% less CO2 than Petroleum Diesel.
Significant emission reductions in CO, CO2, unburned hydrocarbons, particulate matter, ozone formation and reduction in cancer risk.
Why PSC ?
Over 30 years of experience in Design / Build Projects of Distillation, Evaporation and Recovery Systems associated with the petrochemical industry. Over 40 years combined engineering knowledge
Process Design using Simulation Software – ChemCAD & HYSYS.
Engineering Expertise including Mechanical, Piping, Instrumentation, Chemical, Process, Electrical, Controls, and Structural.
Installation and Start-up Expertise in State-of-the-Art Industrial Automation & Controls.
Experienced manpower in Biodiesel Plant Operation, Maintenance, Monitoring and Optimization
Optional process for faster Transesterification such as Ultrasonication Conversion.
PSC’ Engineering Capability
Electrical Electrical ProcessProcess PurchasingPurchasing Project ManagementProject Management Controls Controls Construction Construction ManagementManagement
MechanicalMechanical ChemicalChemical CivilCivil StructuralStructuralInstrumentationInstrumentation
PSC’ Technical Support Capabilities
Lab testingLab testing P&ID developmentP&ID development Pre-commissioning Pre-commissioning
supportsupport Service supportService support Training & DevelopmentTraining & Development Remote engineering Remote engineering
assistance assistance
Conceptual process Conceptual process evaluation evaluation
Process simulation Process simulation Operator trainingOperator training Start-up assistanceStart-up assistance Field service supportField service support Project managementProject management
Pretreatment with Acid Esterification Continuous flow
Trans-esterification using a Bio-Conversion Processor (BCP) Continuous flow / Waterless
Biodiesel Refining (ASV)
Methanol separation from Glycerin and Water (SRXC) Recovered Methanol is reused in the process Glycerin produces is non-hazardous
Post treatment using dry wash applications
Process of PSC Technology
Oil Feed System
EsterificationMethanol
Acid Catalyst
Treated Oil
Virgin Oil
Transesterification
Crude Glycerin
Crude Biodiesel
Glycerin Refining (SRXC)
Biodiesel Refining (ASV)
Dry Glycerin Post Treatment
Dry Wash
Methanol + Water to SRXC
Methanol Recovery
Biodiesel Process Flow
Alkali Catalyst
Biodiesel
Crude Glycerin
Pretreatment / Esterification
Methanol & acid are mixed and injected into oil stream
Mixture is heated to 140°F - 175°F. and reacted in the tubular reactor
After Esterification, dry glycerin is added and mixed with oil-
methanol stream while cooling to 140°F.
Light layer and heavy layers are separated with the help of Centrifuge
Light layer is ready for Transesterification
Esterification
Transesterification
Transesterification is based on the chemical reaction of triglycerides with Methanol to form methyl esters and glycerin in the presence of an alkaline catalyst
Methanol & Catalyst are injected into Light layer from esterification and virgin oil and reacted in the Bio-Conversion Processor (BCP)
Crude Biodiesel and Crude Glycerin are separated using Centrifuge after completion of the transesterification reaction
Crude Biodiesel and Crude Glycerin are refined using distillation columns
Use of Ultrasonication Conversion can speed up this process significantly.
Bio Conversion Processor (BCP)
Biodiesel Refining (ASV)
Crude Biodiesel from Transesterification is refined from Methanol and Water
By controlling the process parameters, Biodiesel is separated from the distillation column bottom
Biodiesel is then further purified with post treatment, or the final washing process
Methanol along with water separated from the biodiesel by ASV column is then further processed to recover Methanol in the SRXC to provide high purity Methanol for reuse
ASV System
ASV System
Glycerin Processing (SRXC)
Crude Glycerin from Transesterification and Methanol / Water stream from ASV unit is refined in the distillation column for Methanol reuse at 99.9% purity
By controlling the process parameters of column, Glycerin, water, and neutralized catalyst are discharged at a flash point above 140°F.
Glycerin recovered from this process is NON-HAZARDOUS and can be easily stored and transported, or can be further refined
Methanol is recovered from the top of the column and reused in the plant processes
SRXC System
SRXC System (Dual Column Design)
Typical HMI Screen (DCS with Optimization)
Typical HMI Screen Remote Control
Post Treatment / Dry Wash
Biodiesel produced is treated using “Dry Washing” to remove impurities
Benefits of Dry Washing
Reduced waste water
Faster wash times
Improved fuel quality
Features of PSC Biodiesel Plants
Prefabricated modular units for modular growth.
Optimization of the process using PSC licensed software.
Field Instrumentation communication using Profibus.
Plant controlled by a Distributed Control System (DCS)
Assistance in engineering of tank farm, buildings, and site infrastructure.
Project management, start-up, operation assistance, day-to-day plant operations.
Ultrasonic Transesterification of Oil to Biodiesel
Ultrasonication increases the chemical reaction speed of the transesterification of vegetable oils and animal fats into biodiesel. This allows to change the production from batch processing to continuous flow processing and it reduces investment and operational costs.
Biodiesel Conversion using Ultrasonication
Continuous Processing and Separation
In a setup for the continuous processing and continuous separation, the heated oil and the catalyst premix are mixed together continuously using adjustable pumps. An inline static mixer improves the homogeneity of the feed to the ultrasonic flow cell. The oil/catalyst mixture passes the flow cell, where it is being exposed to ultrasonic cavitation for approx. 5 to 30 seconds. A backpressure valve is used to control the pressure in the flow cell. The sonicated mix enters the reactor column on the top. The volume of the reactor column is designed to give approx. 1 hour retention time in the column. During that time, the transesterification reaction is completed. The reacted biodiesel/glycerin mix is pumped to the centriguge where it is separated into the biodiesel and glycerin fractions. Post-processing involves alcohol recovery, washing and drying and can be done continuously, too.This setup eliminates reactor batches, conventional agitators and large separator tanks.
Algae Cultivation system
Algae oil is an interesting sustainable feedstock for biodiesel manufacturing. It is an alternative to popular feedstocks, like soybean, canola and palm. Ultrasonication improves the extraction of oil from the algae cells and the conversion to biodiesel. In comparison to traditional oil-seed crops, algae yields much more oil per acre. While soybean typically produces less than 50 gallon of oil per acre and rapeseed generates less than 130 gallon per acre, algae can yield up to 20,000 gallons per acre. In particular diatoms and green algae are good sources for the production of biodiesel.Like other plants, algae stores energy in the form of lipids. There are various methods for extracting the oils, such as pressing, hexane solvent wash and ultrasonic extraction.
Cultivation system* development
Concept: • bubble column reactors for continuous inoculation • open cascade of increasing surface area>> supply effluents • “once through” hydraulic regime>> no backmixing>> no build up of contaminants (< 0.02%) • adequate mixing required large-scale selective cultivation AND water purification at acceptable cost
Integral system (concept)
•system simplification; cost-and energy reduction
Algae Bond Cultivation
Comparison of average oil yields from algae with that from other oilseeds The table above presents indicative oil yields from various oilseeds and algae. Please note that there are significant variations in yields even within an individual oilseed depending on where it is grown, the specific variety/grade of the plant etc. Similarly, for algae there are significant variations between oil yields from different strains of algae. The data presented above are indicative in nature, primarily to highlight the order-of-magnitude differences present in the oil yields from algae when compared with other oilseeds.
Yield of Various Plant Oils Crop Oil in Liters per hectare Castor 1413Sunflower 952Safflower 779Palm 5950Soy 446Coconut 2689Algae 100000
Typical Way That Typical Way That SAHARA GROUP UK SAHARA GROUP UK
PSC BuildsPSC BuildsBiodiesel PlantsBiodiesel Plants
Copyright
Copyright 2008 Petrochemical systems Corporation. All rights reserved.All the text, graphics, design and other works on this presentation are the copyrighted works of Petrochemical systems Corporation. This legal protection does also apply for data or similar institutions. The contents of this presentation may be sighted and downloaded for the private(not for commercial) use, but are otherwise in no way allowed to be reproduced, passed, re-used, alienated, stored, altered, spread or otherwise used without our previous written allowance. Our internet pages can partly contain contents which are subject to the copyright of those who provide these contents. Brands, company logos and illustrations included on this presentation are protected for us and/or (where stated) for those companies which are associated with us and are therefore not allowed to be used for ones own or other purposes.
SAHARA GROUP UKPSC
UK Tel: +44 7798701465 Tel:+442086862443
Contact Information