Personal+Care+Brochure+04 2012

12
personal care VARA

Transcript of Personal+Care+Brochure+04 2012

Page 1: Personal+Care+Brochure+04 2012

personal care

VARA

Page 2: Personal+Care+Brochure+04 2012

02

Sasol Wax is the leading specialist in inno-

vative wax technology. Sasol Wax products

are supplied worldwide into many different

markets and are used in a diversity of

applications.

Paraffin wax is the major raw material for the

production of candles and is also used in the

manufacture of rubber and tires, chipboards,

plastics, foodstuffs, food packaging, printing

inks and paints, textiles, asphalt and many

other products. Sasol Wax offers a compre-

hensive product range of pharmaceutical

white oils, petroleum jellies and waxes. For

decades, Sasol Wax has been concentrating

on the development and optimization of paraffin

and paraffin blends as well as petroleum jellies

for a large number of different applications.

The products are renowned for a broad spec-

trum of applications. Their use ranges from

relatively simple applications to process

oriented tailor-made products for state of

the art production equipment. Specialties

are created for innovative solutions, e. g.

as medium for latent heat storage.

Both macrocrystalline and microcrystalline

paraffin and petroleum jellies represent

complex multicomponent blends consisting

of saturated hydrocarbons. Extracted from

fossil raw materials, our products are cleaned

of any possible pollutants with the aid of

environmentally friendly procedures (e.g.

high-pressure hydrogenation). These highly

refined products are subject to continuous

quality control and from a toxicological point

of view pose no risk to health. Their envi-

ronmentally compatible properties are cha-

racterized by good biodegradability and an

absence of ecotoxic and cumulative effects.

02

03

04

05 06

07

08

09

10

The specialist in paraffin wax

At a glance ...

Products for the Cosmetic and

Pharmaceutical Industry

MERKUR and VARA

Pharmaceutical Petroleum jellies

Pharmaceutical White Oils,

paraffinic

Sasolwax for the Cosmetic and

Pharmaceutical Industry

The Sasol Wax difference

– GMP, ISO & HACCP certification

The latest technology

safeguards quality

Matrix

Sasol Wax products are supplied world-wide in many different markets.

At a glance ...

02

02 At a glance 03 Products for the Cosmetic and Pharmaceuticals Industry

Page 3: Personal+Care+Brochure+04 2012

Products for the Cosmetic andPharmaceutical Industry

03

Solid and liquid paraffins and petroleum jellies help to enhance the health of the skin and reduce desiccation.

The products are used in large areas of the

cosmetic and pharmaceutical industry,

where they are employed as processing

aids, as plasticizers for adjusting hardness,

in many lotions and creams (e.g. cleansing

milk, lipid-replenishing cosmetics and sun

protection agents) and act as the base for

creams, lipsticks, rouge and eye cosmetics

such as eye-shadow, eyebrow pencils and

mascara.

Solid and liquid paraffins and petroleum

jellies are essential constituents in formula-

tions as they have outstanding properties in

terms of their protective action, color and

also as a consistency regulator. They help

to enhance the health of the skin and reduce

desiccation. Other applications range from

shaving foam, hot and cold depilatory waxes

to thermal therapy, which exploits the out-

standing heat storing properties of paraffin

waxes.

An especially demanding application of paraffin

waxes is histology. Highest purity products

are composed with certain additives to give

the desired flexibility. Screening through fine

mesh screens guarantees the absence of any

particulate matter. Only these high quality

products are suitable for the embedding of tis-

sue, which has to be cut in razor-thin sections.

03

Page 4: Personal+Care+Brochure+04 2012

ColourLovibond/

ASTM Colour

Density80 °Ckg/m3

CongealingPoint

°C

Consistency25 °C

mm/10

Viscosity100 °Cmm2/s

Drop Point

°C

Melting Range

°C

Total Compli-ance with

Pharmacopeias

Pharmaceutical petroleum jellies, yellow Ph. Eur. (BP), USP/JP – typical data

MERKUR and VARA pharmaceutical petroleum jellies

04

MERKUR and VARA petroleum jellies are

ointment-like, nearly odorless, homogeneous

mixtures of high-purity, hydrogenated,

predominantly saturated hydrocarbons.

They are snow-white, off-white, pale yellow

or yellow pharmaceutical qualities depen-

ding on the degree of refining.

In the table below we have indicated the

extent to which the degree of purity is covered

by various pharmacopoeias. In each case, refe-

rence is made to the latest monographs.

MERKUR 794, MERKUR 717, VARA 2600, MER-

KUR 793 T, MERKUR 791 and MERKUR 773 are

very high-grade petroleum jellies with excellent

oil-binding capacity, especially for the pharma-

ceutical industry. MERKUR 546 is particularly

stable to heat and suitable for countries with

tropical climates. We recommend MERKUR 110

as Melkfett (Milking Grease) quality.

MERKUR and VARA pharmaceutical petroleum

jellies are mainly used for the following

applications:

• Base material for eye creams, ointments

and hair care agents as well as the main

constituent of skin care creams, baby care,

hand-cleaning pastes, body lotions, hand

and skin creams and eye make-up.

• Melkfett petroleum jellies and Melkfett

ointments (Milking Grease).

Particularly in the pharmaceutical field, not

only white, but also yellow pharmaceutical

petroleum jellies are used as a base material

and consistency regulator. They are a consti-

tuent of many dermatological preparations.

Yellow vaselines are also used in cosmetic

formulations such as milking grease/fatty

ointments and other skin protection creams,

and in veterinary products. Yellow pharma-

ceutical jellies can be obtained either by

coloring white pharmaceutical petroleum jelly

or by bleaching.

The yellow petroleum jellies in the following

table are produced by bleaching and are not

stabilized. We will be glad to inform you about

colored petroleum jelly types on request.

INCI name: Petrolatum

Pharmaceutical petroleum jellies, white Ph. Eur. (BP), USP/JP – typical data

All products comply with the purity requirements of USP, Ph. Eur. (BP), JP and FDA (21 CFR Section 172.880) 1) Subsequently bleached, not stabilized.Colipa Recommendation No. 14 (oral & lip care) on request. Total USP/JP compliant yellow type on request.

04 MERKUR and VARA – pharmaceutical petroleum jellies 05 Pharmaceutical White Oils

VARA CB 1.0 – 1.5 820 50 – 55 165 – 185 7.0 – 9.0 40 – 60 Ph. Eur.

VARA 4200 1.0 max 820 50 – 55 165 – 185 6.5 – 8.5 40 – 60 Ph. Eur.

MERKUR 638 1.0 – 2.0 810 50 – 55 145 – 165 5.0 – 9.0 40 – 60 Ph. Eur.

VARA AB 0.7 y max 820 50 – 55 165 – 185 9.0 35 – 70 Ph. Eur.

VARA 26001) 0.7 y max 825 48 – 53 165 – 185 12.0 35 – 70 Ph. Eur.

VARA 4800 1.0 y max 810 50 – 56 155 – 175 7.0 35 – 70 Ph. Eur.

VARA 5422 0.7 y max 820 48 – 55 210 – 240 7.0 – 10.0 35 – 70 Ph. Eur.

MERKUR 110 1.0 y max 810 50 – 56 170 – 190 7.0 35 – 70 Ph. Eur.

MERKUR 500 0.5 y max 810 50 – 56 140 – 160 7.0 35 – 70 Ph. Eur.

MERKUR 500 USP 0.5 y max 810 45 – 55 140 – 160 6.0 35 – 70 38 – 60 Ph. Eur./USP/JP

MERKUR 546 1.0 y max 805 48 – 56 95 – 120 7.0 35 – 70 Ph. Eur.

MERKUR 717 0.5 y max 825 48 – 54 160 – 180 10.0 35 – 70 38 – 60 Ph. Eur./USP/JP/CF

MERKUR 773 0.5 y max 825 47 – 53 155 – 175 12.0 35 – 70 38 – 60 Ph. Eur./USP/JP

MERKUR 774 0.7 y max 820 49 – 55 190 – 210 7.5 – 10.0 35 – 70 Ph. Eur.

MERKUR 7911) 0.5 y max 820 49 – 56 150 – 170 10.0 35 – 70 Ph. Eur.

MERKUR 793 T 1.0 y max 825 50 – 55 145 – 170 13.0 35 – 70 38 – 60 Ph. Eur./USP/JP

MERKUR 794 0.5 y max 820 50 – 55 160 – 180 13.0 35 – 70 Ph. Eur.

04

Page 5: Personal+Care+Brochure+04 2012

Sasol Wax products are supplied world-wide into many different markets.

Pharmaceutical White Oils, paraffinic

05 06

MERKUR and VARA White Oils Pharma are

colorless, clear, odorless, tasteless, non-fluo-

rescent liquids. They comply with the purity

standards of the European pharmacopoeia,

the United States pharmacopoeia, and the

U.S. Food and Drug Administration, latest

issue each, as indicated under Typical Data.

White Oils Pharma feature constant high

quality and exceptional color and oxidation

stability. The different levels of viscosity

permit a wide range of uses.

INCI name: Paraffinum Liquidum

MERKUR and VARA White Oils Pharma are

recommended for the following applications:

Pharmaceuticals and cosmetics

Base materials for ointments, skin creams,

hair preparations, and suntan products,

ingredients for baby and bath oils, lotions,

lipsticks, massage oils, laxatives, etc.

Lubricants

Lubricants for medical instruments and

apparatus, filling and packaging machines in

the food industry, and compressor cylinders

in the beverages industry. White Oils Pharma

are also recommended as rayon oils and

defoaming and glossing agents.

Pharma 40 PB and 240 PB have US De-

partment of Agriculture (NSF) H1 approval

(Category H1/H2).

Pharma 40 PB NSF Product ID: Reg # 139484

Pharma 240 PB NSF Product ID: Reg # 139485

05

Nonfood CompoundsProgram Listed

Page 6: Personal+Care+Brochure+04 2012

MERKUR und VARA WOP*, paraffinic – typical data

40 PBVARA 200

240 PBVARA 600

Colour Saybolt +30 +30

Density 15 °C kg/m3 830 – 856 860 – 880

Density 20 °C kg/m3 848 865

Viscosity 20 °C mPa*s 30 230 max.

Viscosity 20 °C

40 °C

100 °C

mm2/s

mm2/s

mm2/s

30 – 60

14.0 – 18.5

3.5

190 – 250

62.0 – 75.0

8.5 min.

Flash Point COC, typ. °C 170 220

Pour Point, typ. °C -12 -9

Sulphur % < 0.001 < 0.001

Neutralisation number 0 0

Carbon Distribution, typ. CA

CN

CP

%

%

%

0

35

65

0

31

69

Ph. Eur., last edition

(DAB), BP x x

US Pharmacopoeia (USP) x

NF x

FDA 172.878 x x

BFR 155 Information x x

Odor and Taste none none

Acidity or alkalinity,

polycyclic aromatic

hydrocarbons, readily

carbonisable substances

Meets the test of pharmacopoeia indicated

1) with exception of Viscosity/Density* WOP: White Oil Pharmaceutical

At a room temperature below 20 °C, cloudiness

of the product may occur but disappears

again as the temperature increases. This does

not constitute a quality defect.

06 Pharmaceutical White Oils 07 Sasolwax for the Cosmetic and Pharmaceuticals Industry

06

Page 7: Personal+Care+Brochure+04 2012

Hard Paraffin Waxes are mainly used in the

formulation of lipsticks, creams, lotions and

make-up.

INCI name: Paraffin

Soft Paraffin Waxes are used in the formulation

of lipsticks, creams and lotions. Sasolwax

6050 is preferably used as an emollient to

obtain the desired consistencies. Sasolwax

5217 and 4608 are raw materials for hot and

cold depilatory products.

INCI name: Paraffin

Microcrystalline Waxes are used for the

formulations of creams and lipsticks to adjust

hardness/softness as well as solidification

point. All microcrystalline waxes in this bro-

chure conform to the COLIPA requirements

for lip care products.

INCI name: Microcrystalline Wax

Genuine ozokerite was found in association

with petroleum deposits, from which it was

extracted by mining. Purified ozokerite is

known as ceresin. To this day, cosmetic and

pharmaceutical applications use white,

purified ceresin.

Today, however, ozokerites/ceresins are mix-

tures of various waxes with high solidification

points and specific properties with regard to

hardness, viscosity and penetration. Ozokerites/

ceresins are highly valued in creams and many

other formulations because of their special oil

binding properties.They also help to stabilize

emulsions and regulate viscosity, bind powders

or preparations containing powders, and help

to give hair cosmetics antistatic and conditi-

oning properties.

INCI name: Ceresin

Sasolwax for the Cosmetic and Pharmaceuticals Industry

07

CongealingPoint

°C

Oil Content

%

Penetration25 °C

mm/10

Viscosity100 °Cmm2/s

Synthetic Waxes produced by the Fischer-

Tropsch process show a high molecular linearity

and therefore low penetration values with high

congealing points. Due to these properties

they are used in formulations for hardness

regulation. Powdered synthetic waxes with a

particle size of 90% finer than 10 µm and a

topcut of 20 µm are used for abrasion regu-

lation in abrasive pastes (e. g. tooth paste).

INCI name: Synthetic Wax

Sasolwax 4444 46 – 50 0.0 – 5.0 40 – 65 3.0 – 5.0

Sasolwax 4586 47 – 49 0.0 – 4.0 40 – 65

Sasolwax 4608 46 – 48 0.0 – 1.5 50 – 70 2.0 – 4.0

Sasolwax 5217 52 – 54 0.0 – 2.5 35 – 45 3.0 – 4.0

Sasolwax 6050 59 – 61 0.0 – 6.0 55 – 65 5.8 – 6.5

Sasolwax 6063 44 – 47 60 – 80

Sasolwax 9106 50 – 52 0.0 – 1.0 28 – 32 8.6 – 8.9

Sasolwax 0907 83 – 94 0.0 – 2.0 4 – 10 14.0 – 18.0

Sasolwax 1800 70 – 80 0.0 – 2.0 18 – 22 13.0 – 17.0

Sasolwax 3971 70 – 75 0.0 – 2.0 25 – 33 12.0 – 16.0

Sasolwax 7835 70 – 80 0.0 – 2.5 25 – 30 13.0 – 16.0

Sasolwax 6090 64 – 69 40 – 60 9.0 – 12.0

Sasolwax 6403 63 – 66 0.0 – 0.5 16 – 20 5.5 – 6.5

Sasolwax 6660 67 – 70 0.75 – 1.5 15 – 18 8.0 – 10.0

Sasolwax C80 78 – 83 0.0 – 0.75 0 – 7

Sasolwax H1 96 – 100 0 – 1

Sasolwax H105 102 – 108 0 – 1

Sasolwax SP30 96 – 100 0 – 1

Sasolwax SP105 102 – 108 0 – 1

Hard Paraffin Wax – typical data

Soft Paraffin Wax – typical data

Microcrystalline Wax – typical data

Ozokerite/Ceresin – typical data

Synthetic Wax – typical data

Powder Wax – typical data

Sasolwax 5005 50 – 53 0.0 – 0.8 19 – 22

Sasolwax 5006 50 – 52 0.0 – 1.0 28 – 32 3.0 – 5.0

Sasolwax 5105 52 – 54 0.0 – 0.5 21 – 25 3.0 – 5.0

Sasolwax 5603 50 – 58 0.0 – 0.8 15 – 19 3.0 – 5.0

Sasolwax 5803 58 – 60 0.0 – 0.5 15 – 19 4.0 – 5.0

Sasolwax 6203 62 – 65 0.0 – 0.5 16 – 20 5.0 – 6.0

07

Page 8: Personal+Care+Brochure+04 2012

The Sasol Wax difference – GMP, ISO & HACCP certification

08

Our production facilities and processes benefit from our constant efforts to improve and innovate.

Sasol Wax supply first-class products

offering many benefits for the user. Our

products are available all over the world.

What’s more, our technical expertise ex-

tends from Hamburg to all destinations,

either directly or via our contacts and

sales partners. Our production facilities

and processes benefit from our constant

efforts to improve and innovate. Our re-

search and development are state of the

art. We will be able to offer customer-

specific solutions for your products.

We are thoroughly familiar with the special

requirements of the cosmetic industry and

the pharmaceutical and food industries. We

have committed ourselves to production and

documentation in accordance with the basic

GMP rules, and we therefore follow the “Joint

IPEC-PQG Good Manufacturing Practices

Guide for Pharmaceutical Excipients”.

In addition to the basic requirements such as

100% traceability of batches, comprehensive

quality control having regard to pharmaco-

poeia monographs and many other details, we

have in particular laid down the highest stan-

dards for filling of petroleum jelly and white

oils. Both product lines are filled in new instal-

lations, with high hygiene requirements and

to some extent under protective atmosphere

with filtered air in closed systems. This, com-

bined with production in closed tank and pipe-

line systems, ensures that we reach a standard

which has been given unrestricted approval* by

the German Association of Research-Based

Pharmaceutical Companies (VFA) under the

Joint Audit Programme for Excipients (JAVfH).

It goes without saying that our company main-

tains an integrated management system. We

are certified under DIN EN ISO 9001 (quality),

DIN EN ISO 14001 (environment) and OHSAS

18001 (occupational safety and health).

For products used in the food industry, work

has started on introducing an HACCP system

(Hazard Analysis and Critical Control Point) in

accordance with the Codex Alimentarius.

* for non-sterile preparations

08 GMP, ISO & HACCP certification 09 The latest technology safeguards quality

08

Page 9: Personal+Care+Brochure+04 2012

The latest technology safeguards quality

09

In Chapter 8 we demonstrated the impor-

tance we attach to GMP, ISO and HACCP.

This page gives you examples of how

these requirements are implemented in

our technology.

The picture at top left shows the filling

system for pharmaceutical white and yellow

petroleum jellies: a hermetically sealed

system that works with filtered air under

over-pressure. The closed drums are fed to

the filling chamber through a first airlock,

opened, filled by weight, closed again, then

fed out via a second airlock.

The batch is marked on the body of the

drum by an inkjet printer. And all this takes

place continuously and automatically. This

is how we ensure the quality, hundred per-

cent traceability, and the stringent hygiene

requirements – ruling out dirt, microorga-

nisms etc. Bottom left: Filling nozzle and

drum opening on completion of filling.

The picture at bottom right shows one

of our three high-pressure hydrogenation

units. The reactor works with a fixed-bed

catalyst. All substances that have no place

in our products are removed at high

temperature under hydrogen over-pressure.

High-pressure hydrogenation is the most

important step in manufacturing products

for use in cosmetics, foods and pharmaceu-

tical preparations. Storage and transport take

place in closed systems.

High-pressure hydrogenation, bleaching, storage and filling – our production facilities are in line with the latest technology and conform to the highest standards.

09

Page 10: Personal+Care+Brochure+04 2012

10 Matrix

Portofolio whitepetroleum jellies • • • • • • • • • • • • •MERKUR 115 • •

MERKUR 110 • • •

VARA 2600 • • • •

VARA 5422 • •

MERKUR 793 T • •

MERKUR 791 • •

MERKUR 7941) • • • • •

MERKUR 546 • • • •

MERKUR 7731) • • • •

MERKUR 774 • • • •

Portfolio yellow petroleum jellies • • • • • • • • • • •VARA CB • •

Portfolio Pharm. White Oil • • • • • • • • • • • • • •MERKUR WOP 40 PB • • • • • • • •

MERUKR WOP1)

240 PB • • • • • • • • • • •MERKUR WOP 100 PB • • • • • • • •

Portfolio Paraffin Wax

• • • • • • • • • •

Sasolwax 5006 •

Sasolwax 4444 •

Sasolwax 6063 • •

Sasolwax 9106 •

Sasolwax 4586 •

Sasolwax 4608 • •

Sasolwax 5105 •

Sasolwax 6203 • • • • • • • • • •

Portfolio1) Microcrys-talline Wax FDA/BFR • • • • • • • • • •Sasolwax 7835 • • • •

Sasolwax 0907 • • •

Portfolio Synthetic Wax • • • • • •Sasolwax C80 • • • •

Sasolwax H11) • •

Portfolio Ozokerite/Ceresin • • • • • • • • •

Matrix

10

1) The products comply with the COLIPA recommendations for use in lip care products. 2) FDA 21 CFR/172,878 for pharmaceutical white oil; 172,886 for paraffin wax and micro wax; 172,880 for pharmaceutical yellow and white petroleum jellies. Always observe national and EU regulations.

Body

Car

e/S

kin

Cre

ams

Baby

Car

e

Body

Lo

tio

ns

Phar

mac

euti

cal C

ream

s,

Loti

ons

, Sal

ves,

Pas

tes

„Milk

ing

Gre

ase“

/Fat

ty C

ream

s

Co

ld R

ubs

Inse

ct R

epel

lent

s

Phar

mac

euti

cal B

ase

Cre

ams

Pain

-rel

ievi

ng B

alm

s

Bath

Oils

and

Bab

y O

ils

Phar

mac

euti

cal

Eye

Prep

arat

ions

Med

ical

Oil

Bath

s

Lip

Car

e

Lip

Stic

ks

Hai

r C

are

and

Styl

ing

Ethn

ic H

airc

are/

Hai

r Rel

axer

Exfo

liant

s

Dec

orat

ive

Cos

met

ics/

Be

auty

Pro

duct

s

Fang

o A

pplic

atio

ns/H

and

Bath

s/Th

erm

al T

hera

py

Dep

ilati

on

Pro

duct

s

Gum

Bas

e/F

oo

d C

oat

ings

/C

onf

ecti

one

ry D

ivid

ing

Age

nts

Food

Mac

hine

ry L

ubri

cati

on

Foo

d A

ddit

ives

in r

elat

ion

to 2

1 C

FR F

DA

Vet

erin

ary

Pro

duct

s

10

Page 11: Personal+Care+Brochure+04 2012

11

Sasol Wax Personal Care – We invest in your future!

With personal care, petroleum jelly, microcrystalline wax, paraffin wax,FT hard wax and paraffin oil (pharmaceutical white oil) are used in many different products of daily living.

Page 12: Personal+Care+Brochure+04 2012

This publication/data sheet and the information within were assembled and checked with utmost care and are to be regarded as accurate as of the date of issue. Nevertheless, Sasol Wax GmbH takes no responsibility or warrant for its timeliness, complete-ness, quality or correctness. This publication/data sheet is for information only and does not warrant any particular product properties. It is the user’s obligation to check the products and use them safely as well as to comply with all applicable laws and regulations. Sasol Wax GmbH shall not be responsible for any damage or injury in particular resulting from use, other than the stated use of the material, from any failure to abide to recommendations, or from any dangers inherent in the nature of the material. It is recommended to contact the manufacturer for further information, especially if it is intended to use the product for applications other than the stated. In addition, the most recent version of our General Business Conditions will apply.

March 2012

12

Sasol Wax GmbH – Birkenhead

Sasol Wax (South Africa)

Sasol Wax Sdn. Bhd. (Malaysia)

Sasol Wax North America Corp.

Sasol Wax GmbH – HamburgSasol Wax GmbH – Linz

Sasol Wax S.A.S. (France)

Alexandria Wax Products Co.(Egypt)

Sasol Chemicals Shanghai(China)

Sasol Wax GmbH

Worthdamm 13-2720457 HamburgGermany

Phone: +49 40 78 115-481Fax: +49 40 78 115-495

[email protected]