Personal protective equipments for industries

7/28/2019 Personal protective equipments for industries

1/19

SAFETY TRAINING

PROGRAMMEONPERSONAL PROTECTIVE

EQUIPMENT

BYSafety Department


2/19

PERSONAL PROTECTIVE EQUIPMENT :

PPE does not eliminate the hazard but it isdesigned interpose/protect effectivebarrier between a person & harmful object

How to select the PPE ?

Select the proper type of equipment.

Make sure that the supervisor sees to itthat the employee uses the equipmentcorrectly.


3/19

:

PPE available commercially are tested & approved by an impartial examiner according topublished an generally accepted performancespecifications.

Manufacturer have been aware of theirresponsibilities in this respect & have aremarkable record of reliability.

Their respective can usually be called in todemonstrate their products & discuss theirconformance to safety standards.


4/19

LIST OF IMPORTANT PPEs Industrial Safety Helmet. Goggles. Ear muf,Ear plug. Face Shield, Welding hand screen,

Welding Shield Helmet fitted withdark glass.

Dust mask, Nose mask Apron- Asbestos, PVC Acid/Alkali

proof, Chrome leather Canvas,Rubber etc.

Safet Belts Line Safet Belt


5/19

LIST OF IMPORTANT PPEs

Hand Gloves- Asbestos, Cotton,Chrome leather, Leather palm, PVCAcid/Alkali proof, Rubber6.6Kv/11Kv.

Leg guards Safety Shoes-(Mechanical),

(Electrical) Full Suit- Asbestos, PVC Acid/Alkali,

Aluminised. Res irator S stem.


6/19

Industrial Safety Helmet

Material Non metallic Size 500 mm to 640 mm circumference Mass 400 grams (Max) Shock Absorption test 3 Kg wooden

block dropped from 1.5 mtrs. Penetration Resistance For 500 gramssteel conical points from 3 mtrs.

Electrical Shock resistance 2000V, 50

HZ for 1 minutes. Water Absorption - < 5 % (for 24 hours) Heat resistance for 93 deg. Centigrade for

15 minutes.

No visible damage for flame for 10Seconds.


7/19

Safety Shoes Selection:

It should comfort to standards Comfortable to wear Durability

Grip Suitable for different conditions


8/19

Safety Shoes Standards:

Weight should be 1750 grms per pair (Max)

Steel reinforced toe for with standing cap. 14.2kgfm

Ankle high

Max. eyelets -6

Electrical Safety Shoes 15Kv for 1 minute


9/19

Safety Belt Safety belts are used in Industries,

particularly while working at height,in depths, for excavation and

construction, installation andpainting etc.

We have to use a belt when theheight is 3mtrs or more fromground or from a plat form andwhich does not have any workingplatform.


10/19

Safety Belt Types:

Waist safety belt General Safety belt Pole safety belt Confined space belt

Waist Safety Belt: It consist of a waist belt & aspace line

Where much height is not there. Max. height from anchorage to person is 1mtr. Max. fall allowed is 0.6 mtrs (Total Safety line

length is 2mtrs). Uses: Windows cleaning & structural cleaning.


11/19

enera urpose a e y e

This is used for all purpose.

Recommended for jobs of mobility

Consists one waist belt & the shoulderstraps

Recommended length of lanyard of safetybelt 3mtrs


12/19

Confined Space It consists of a waist belt & a safety

line for anchorage and a life line forrescue purpose

Length of life line is not restricted

Free fall allowed up to 0.6mtr.


13/19

Linemans Safety Belt It consists of a waist belt & a pole strap Material: Belts & harness shall be nylon/synthetic Width of web 45mm

Dia. Of rope 10mm Test: Flammable test. Performance test One human dummy of 100Kg is

tied as if to a wearer and tested for 1.8mtr, height

Allow to fall freely from 1.5 times of above height & test. After second, test the belt should not developany crack, kinks/any other damages.

Tensile load: Should not break even at 200kg of load falling on a person


14/19

Uses of Important PPEs Safety Helmet: To protect head from fall of any object or

flying particles or electrical shock or both

Goggles:

The protection of the eyes from injury byphysical or chemical agents, flying of particles

Goggles are used at Chipping, Grinding,Turning, Drilling, Laboratories, Chemicals


15/19

Uses of Important PPEs Face Shield:

To protect face, neck from chemical splash/spillage,flying particles, sprays of hazardous liquids, splashesof molten metal and from hot solutions.

Nose Mask: (Through away type)

To protect nose from emission dust particles

Dust Mask: (Filter type)

To protect nose from emission dust particles


16/19

Uses of Important PPEs Ear Plug:

To protect ears from impact of high noise orexcessive noise industry

Medical authorities say that anything over a90 decibels per 8hours exposure sound levelmay endanger a persons hearing

Soft plastic plugs give more comfort thanhard type, better than rubber types


17/19

Uses of Important PPEs Ear Muff:

To protect ears from impact of high noise or excessive noiseindustry

Aprons:

To protect chest, stomach portion

Hand Gloves:

To protect hands

Leg Guards:

To protect legs


18/19

Uses of Important PPEs Safety Shoe:

To protect foots

Full Suit:

To protect full body from head to foot

Welding Shield fitted with helmet/hand screen:

To protect head & face

Welding & cutting process, emit radiation, depending up on theflux used & the size & temp. of the pool of molten metal

Welding process will emit more or less visible & Infraredradiation.


19/19

Personal protective equipments for industries

Documents

Transcript of Personal protective equipments for industries