PERSONAL PROTECTIVE PERSONAL PROTECTIVE EQUIPMENT PROGRAMEQUIPMENT PROGRAM

REFERENCESREFERENCES 29 CFR 1910.133 ANSI Z87.1 MCO 5100.8F, CHAPTER 13

NEARLY TWO MILLION PEOPLE ARE EXPECTED TO RECEIVE DISABLING WORK-RELATED INJURIES THIS YEAR

MORE THAN ONE-FOURTH OF THESE INJURIES WILL INVOLVE THE HEAD, EYES, HANDS OR FEET

INTRODUCTIONINTRODUCTION

PERSONAL PROTECTIVE PERSONAL PROTECTIVE EQUIPMENT DESIGNEQUIPMENT DESIGN

PPE IS DESIGNED TO PROTECT THE SAFETY AND HEALTH OF THE EMPLOYEE

SOLELY USED AS AN INTERMEDIATE UNTIL THE HAZARD IS ELIMINATED OR ENGINEERING CONTROLS ARE IN PLACE

APPROVED BY ANSI- RESPIRATORS BY NIOSH

OSH POLICYOSH POLICY ENGINEERING CONTROLS SHALL ENGINEERING CONTROLS SHALL

BE THE PRIMARY METHOD USED BE THE PRIMARY METHOD USED TO ELIMINATE HAZARD TO ELIMINATE HAZARD EXPOSURE IN THE WORK PLACEEXPOSURE IN THE WORK PLACE

OSH POLICYOSH POLICY

CORRECT PPE TO BE PROVIDEDCORRECT PPE TO BE PROVIDED USE AND MAINTAIN IN A USE AND MAINTAIN IN A

SANITARY CONDITIONSANITARY CONDITION

ACTIVITIES SHALL ASSESS WORK ACTIVITIES SHALL ASSESS WORK AREAS BY THE OSH MANAGER/IH AREAS BY THE OSH MANAGER/IH DEPT. TO DETERMINE HAZARDS DEPT. TO DETERMINE HAZARDS WHICH NECESSITATE THE USE OFWHICH NECESSITATE THE USE OF

PPEPPE SELECT, AND HAVE EACH AFFECTED SELECT, AND HAVE EACH AFFECTED

EMPLOYEE USE THE CORRECT EMPLOYEE USE THE CORRECT TYPE OF PPETYPE OF PPE

BASIC PROGRAM REQUIREMENTSBASIC PROGRAM REQUIREMENTS

COMMUNICATE SELECTIONS TO COMMUNICATE SELECTIONS TO AFFECTED EMPLOYEESAFFECTED EMPLOYEES

PROVIDE WRITTEN CERTIFICATION PROVIDE WRITTEN CERTIFICATION THAT:THAT:

- IDENTIFIES WORKPLACE

- CERTIFYING PERSON

- DATES OF CERTIFICATION

BASIC PROGRAM REQUIREMENTS BASIC PROGRAM REQUIREMENTS CON’TCON’T

BASIC PROGRAM REQUIREMENTSBASIC PROGRAM REQUIREMENTS CON’TCON’T

ASSESSMENT GUIDELINES:

- PPE SURVEY

CONSIDERATION SHOULD BE GIVEN TO THE BASIC HAZARD CATEGORIES:- NOISE - CHEMICAL

- VIBRATION - HEAT

- FALLING/FLYING OBJECTS - DUST

- HIGH INTENSITY LIGHT/RADIATION - ELECTRICAL

ONCE HAZARD ASSESSMENT HAS BEEN ONCE HAZARD ASSESSMENT HAS BEEN CONDUCTED, THE SURVEY WILL IDENTIFY CONDUCTED, THE SURVEY WILL IDENTIFY TO EMPLOYEES:TO EMPLOYEES:

- WHO WILL WEAR PPE- WHO WILL WEAR PPE

- - WHEN TO WEAR PPE

- WHAT PPE TO WEAR

- HOW TO WEAR PPE

- LIMITATIONS OF PPE

- PROPER CARE, MAINTENANCE,

USEFUL LIFE AND DISPOSAL OF

PPE

HAZARD ASSESSMENTHAZARD ASSESSMENT

HAZARD ASSESSMENT CON’T

ONCE PERSONNEL HAVE ONCE PERSONNEL HAVE DEMONSTRATED AN DEMONSTRATED AN UNDERSTANDING OF TRAINING, UNDERSTANDING OF TRAINING, VERIFICATION OF CERTIFICATION VERIFICATION OF CERTIFICATION WILL BE PROVIDED IN WRITINGWILL BE PROVIDED IN WRITING

DOCUMENT ALL DOCUMENT ALL

TRAININGTRAINING

HAZARD ASSESSMENT CON’T

RETRAINING:PERFORM IF PERSONNEL DO NOT UNDERSTAND THE TRAINING POINTS DESCRIBED OR IF PPE REQUIREMENTS CHANGE IN THE WORK PLACE

VARIOUS TYPESVARIOUS TYPES TYPES OF PPE DISCUSSED:

- HEARING AND SIGHT

- FOOT

- RESPIRATORY

- HEAD

- HAND

SELECTION OF PPESELECTION OF PPE Type of Material Adequate Ventilation (Nature or

Mechanical) MSDS Recommend PPE Length of Time Material is Utilized Material Cause Injury into Eyes Material Generate Sharp Chips or Dust Wearing PPE Makes Sense

EQUIPMENT SPECIFICATIONS AND EQUIPMENT SPECIFICATIONS AND REQUIREMENTSREQUIREMENTS

ALL PPE AND EQUIPMENT SHALL MEET THE MINIMUM APPROVAL OF:

- FEDERAL SPECIFICATIONS

- ANSI STANDARDS

- UNDERWRITER’S LABORATORIES (UL),

FACTORY MUTUAL (FM), AMERICAN SOCIETY

OF TESTING AND MATERIALS (ASTM)

EYE AND FACE ROTECTIONEYE AND FACE ROTECTION ANSI APPROVED EYE AND FACE

PROTECTION SHALL BE WORN WHEN THERE IS REASONABLE PROBABILITY THAT AN INJURY CAN BE PREVENTED OR REDUCED BY WEARING SUCH EQUIPMENT

EYEWEAR BASIC COVERAGEEYEWEAR BASIC COVERAGE

TYPES OF EYE AND FACE PROTECTION INCLUDE:

- SAFETY GLASSES

- GOGGLES

- FACE SHIELDS

- WELDING HELMETS

- FULL FACE RESPIRATORS

SAFETY GLASSES OR GOGGLES SHALL BE WORN UNDER FACE SHIELDS FOR ADDITIONAL PROTECTION

EYEWEAR BASIC COVERAGEEYEWEAR BASIC COVERAGE CON’TCON’T

TINTED OR SHADED LENSES MAY TINTED OR SHADED LENSES MAY BE NEEDED FOR PROTECTION BE NEEDED FOR PROTECTION AGAINST GLAREAGAINST GLARE

TINTED OR SHADED LENSES MAY TINTED OR SHADED LENSES MAY LIMIT YOUR VISION WHEN MOVING LIMIT YOUR VISION WHEN MOVING FROM BRIGHT TO DIM AREASFROM BRIGHT TO DIM AREAS

SPECIALLY NUMBERED LENS ARE SPECIALLY NUMBERED LENS ARE PROVIDED FOR PROTECTION OF PROVIDED FOR PROTECTION OF RADIANT ENERGY (WELDING, ETC.)RADIANT ENERGY (WELDING, ETC.)

EYEWEAR BASIC COVERAGEEYEWEAR BASIC COVERAGE CON’TCON’T

PRESCRIPTION LENSES PRESENT SPECIFIC PRESCRIPTION LENSES PRESENT SPECIFIC HAZARDS SUCH AS:HAZARDS SUCH AS:

- DUST CAUGHT UNDER THE LENS- DUST CAUGHT UNDER THE LENS

- CHEMICAL REACTION WITH CONTACTS- CHEMICAL REACTION WITH CONTACTS IF PRESCRIPTION GLASSES ARE WORN YOU MUST IF PRESCRIPTION GLASSES ARE WORN YOU MUST

WEAR:WEAR:

- GOGGLES AND/OR OTHER PROTECTIVE - GOGGLES AND/OR OTHER PROTECTIVE DEVICES DESIGNED TO FIT OVER DEVICES DESIGNED TO FIT OVER GLASSES GLASSES

OROR

- PROTECTIVE EYEWEAR GROUND TO - PROTECTIVE EYEWEAR GROUND TO YOUR PRESCRIPTION YOUR PRESCRIPTION

DESIGNATED EYE HAZARDOUS DESIGNATED EYE HAZARDOUS

AREASAREAS AREAS AND PROCESSES WHICH MAY AREAS AND PROCESSES WHICH MAY

PRODUCE EYE AND FACE HAZARDS:PRODUCE EYE AND FACE HAZARDS:

-- FLYING PARTICLES AND CHIPS FLYING PARTICLES AND CHIPS

- SPLASHES FROM LIQUIDS SUCH AS ACIDS, - SPLASHES FROM LIQUIDS SUCH AS ACIDS,

CAUSTICS AND SOLVENTSCAUSTICS AND SOLVENTS

- HOT SLAG AND MOLTEN METAL- HOT SLAG AND MOLTEN METAL

- WELDING GLARE - WELDING GLARE POST DESIGNATED AREASPOST DESIGNATED AREAS

WITH APPROPRIATE WARNINGWITH APPROPRIATE WARNING

SIGNSSIGNS

RESPONSIBILITYRESPONSIBILITY THE COMMAND IS

RESPONSIBLE FOR PROVIDING THE PROPER PPE, TRAINING PERSONNEL IN PROPER USE, LIMITATIONS OF PPE, MAINTENANCE, STORAGE, AND ENFORCEMENT OF ITS USE!

HEAD PROTECTIONHEAD PROTECTION HELMETS AND HATS FOR THE PROTECTION OF

MARINE CORPS EMPLOYEES FROM THE IMPACT OF FALLING AND FLYING OBJECTS AND FROM LIMITED ELECTRICAL SHOCK AND BURN SHALL MEET THE SPECIFICATIONS OF ANSI Z89.1-1986 HEAD PROTECTION

HEAD PROTECTIONHEAD PROTECTION SHELL IS DESIGNED TO ABSORB SOME

IMPACT SUSPENSION MUST BE ADJUSTED SO

SHELL IS 1.5 INCHES ABOVE THE HEAD HARD HATS ARE TESTED TO

WITHSTAND IMPACT OF 8 LB WEIGHT DROPPED FROM 5 FT

HARD HATS MUST ALSO MEET WEIGHT, FLAMMABILITY AND ELECTRICAL INSULATION STANDARDS

POST DESIGNATED AREAS WITH THE APPROPRIATE WARNING SIGNS

CLASSES OF HARD HATS CLASSES OF HARD HATS COMPLIES WITH ANSI Z89.1

CLASS A:

PROTECTS FROM FALLING OBJECTS AND ELECTRICAL SHOCKS UP TO 2,200 VOLTS

CLASS B:

PROTECTS FROM FALLING OBJECTS AND ELECTRICAL SHOCKS UP TO 20,000 VOLTS

CLASS C:

PROTECTS FROM FALLING OBJECTS, BUT NOT DESIGNED FOR USE AROUND LIVE

ELECTRICAL WIRE OR CORROSIVES CLASS D:

PROTECTION FOR FIRE FIGHTERS

MAINTENANCE OF PPEMAINTENANCE OF PPE

INSPECTION REPAIR DAMAGE CLEANING/

DISINFECTION PROPER STORAGE TRAINING ENFORCEMENT

FOOT PROTECTIONFOOT PROTECTION

FOOT INJURIES ARE MOST LIKELY TO OCCUR WITH:

- HEAVY OBJECTS FALLING ON YOUR FEET

- ROLLING OF HEAVY

OBJECTS

- PIERCING OF OBJECTS

THROUGH SOLES OF YOUR SHOE

FOOT PROTECTION FOOT PROTECTION CON’TCON’T

IF WORKING AROUND ELECTRICAL WIRES, BOOTS/SHOES MUST BE METAL FREE AND NON-CONDUCTIVE

STATIC FREE ENVIRONMENTS REQUIRE CONDUCTIVE SHOES

RUBBER OR SYNTHETIC FOOTWEAR MAY BE REQUIRED AROUND CHEMICALS

AVOID LEATHER SHOES/BOOTS AROUND CORROSIVES

FOOT GUARDS AND HEEL AND ANKLE SHIELDS MAY BE REQUIRED FOR PARTICULAR WORK

FOOT PROTECTION FOOT PROTECTION REQUIREMENTSREQUIREMENTS

ACTIVITIES VIA THE IH SURVEY SHALL DETERMINE FOOT HAZARDOUS AREAS

FOOT PROTECTION SHALL BE WORN AT ALL TIMES IN A DESIGNATED FOOT HAZARD AREA

FOOT HAZARD AREAS SHALL BE PROVIDED WITH APPROVED WARNING SIGNS

MAINTAIN CURRENT FOOT PROTECTION

FOOT PROTECTIVE FOOT PROTECTIVE DEVICESDEVICES

SAFETY SHOES, WITH BUILT - IN PROTECTIVE BOX, ARE INTENDED PRIMARILY TO PROVIDE PROTECTION FROM HEAVY FALLING OR ROLLING OBJECTS

ALL SAFETY FOOTWEAR SHALL BE STAMPED BY MANUFACTURER AS MEETING THE ANSI Z41.1

OTHER AVAILABLE SAFETY SHOES:- SEMI-CONDUCTIVE- MOLDER’S STYLE (FOR MOLTEN METALS)- SAFETY BOOTS- ELECTRICAL HAZARD (NOT TO EXCEED 600 VOLTS)

APPROPRIATION AND DISTRIBUTIONAPPROPRIATION AND DISTRIBUTION MILITARY: SHALL BE PROVIDED STANDARD

STOCK SAFETY SHOES WHEN REQUIRED - WHEN SAFETY SHOES

EXHIBIT WEAR, SUCH THAT

SAFETY PROTECTION IS NO

LONGER AFFORDED, THE

COMMAND SHALL PROVIDE

STANDARD STOCK SAFETY

SHOES AS ORGANIZATIONAL

CLOTHING (SIMILAR TO

COVERALLS OR FOUL

WEATHER GEAR)

HAND PROTECTIONHAND PROTECTION FINGERS, HANDS AND ARMS ARE INJURED MORE

THAN ANY OTHER BODY PART GLOVES ARE THE MOST COMMON PROTECTORS

FOR THE HANDS BARRIER CREMES MAY BE USED AS HAND

PROTECTION OR, IN CONJUCTION WITH OTHER HAND PROTECTION

HAND PROTECTION HAND PROTECTION CON’TCON’T

HAND PROTECTION SHALL BE PROVIDED WHEN HANDS ARE EXPOSED TO:

- SKIN ABSORPTIONSKIN ABSORPTION

- SEVERE CUTS OR LACERATIONS- SEVERE CUTS OR LACERATIONS

- ABRASIONS AND PUNCTURES- ABRASIONS AND PUNCTURES

- CHEMICAL BURNS- CHEMICAL BURNS

- THERMAL BURNS- THERMAL BURNS

- TEMPERATURE - TEMPERATURE

EXTREMES EXTREMES

SELECTION SHALL BE BASED ON:PERFORMANCE CHARACTERISTICS OF HAND PROTECTION RELATIVE TO:

- TASKS PERFORMED- CONDITIONS PRESENT- DURATION OF USE- POTENTIAL HAZARDS IDENTIFIED- FUNDING

HAND PROTECTION HAND PROTECTION CON’TCON’T

VINYL OR NEOPRENE GLOVES ARE SUFFICIENT WHEN WORKING WITH MOST CHEMICALS

LEATHER OR COTTON KNITTED GLOVES ARE FOR HANDLING ABRASIVES, METAL OR SHARP OBJECTS

IT IS DANGEROUS TO WEAR GLOVES AROUND MACHINERY WITH ROTATING PARTS

TYPES OF HAND PROTECTIONTYPES OF HAND PROTECTION

INSPECTION OF EQUIPMENT BEFORE AND AFTER USE

REPAIR DAMAGE OR REPLACE IT CLEAN AND SANITIZE EQUIPMENT PROPER STORAGE AND HANDLING

OF ALL PPE TRAINING

MAINTENANCEMAINTENANCE

LIFE PRESERVERS (PFD)LIFE PRESERVERS (PFD) WRIST RESTSWRIST RESTS SUN, WIND AND DUST GOGGLESSUN, WIND AND DUST GOGGLES CRANIALSCRANIALS SEAT BELTSSEAT BELTS SAFETY HARNESSSAFETY HARNESS RUBBER APRONRUBBER APRON

MISCELLANEOUS PPEMISCELLANEOUS PPE

CONCLUSIONCONCLUSION CONDUCT A HAZARD ASSESSMENT SELECT THE CORRECT PPE CORRECTLY USED MEDICAL SURVEILLANCE MAINTENANCE OF PPE TRAINING ENFORCEMENT PPE IS DESIGNATED FOR YOUR SAFETY

AND WELL BEING