PERISTALTIC METERING PUMPS SINCE 1957

WHY STENNER PERISTALTIC METERING PUMPS?

RELIABLE & REPEATABLE INJECTION

Stenner’s self-priming pumps provide

accurate dosing and output

reproducibility within 2%. The pump

head has a 3-point roller design that

acts like a check valve to help prevent

backflow, siphoning, overdosing and

loss of prime.

PRACTICAL DESIGN

Solutions are contained in the pump

tube without exposure to air or the

moving parts. The pump can run dry

without damage and prime when the

tank is re-filled. Check valves are not

needed in the pump head.

UNIQUE TUBE REPLACEMENT

Stenner’s QuickPro® pump line and the

Econ pump line each offer patented

pump heads specifically designed for

quick and easy tube replacement.

LESS DOWN TIME

The pumps are self-priming and do not

lose prime from off-gassing solutions.

De-gassing valves are not required. All

pump components are easily accessible

for timely servicing.

Animal Health

Applications

Water Line Sanitation, Acidification,Biofilm ReductionInstallation Sites

Livestock Farms, Hatcheries, BreedingFacilities, Private Water Supplies

Industrial Process

Applications

Treatment of Process Water, Injection of AdditivesInstallation Sites

Manufacturing Plants, Processing Facilities

Metal Finishing

Applications

Plating Bath Treatment, Wastewater pH ControlInstallation Sites

Metal Processing Plants, Manufacturers

Car Wash

Applications

Water Reclamation, Injection of detergents,waxes, tire cleaners, rust inhibitorsInstallation Sites

Car rental facilities, car & truck washes

Irrigation & Horticulture

Applications

Fertilizers, Line Cleaners, pH AdjustmentInstallation Sites

Agricultural Farms, Nurseries, Turf Farms

Food & Beverage

Applications

Drain Line Maintenance, Drain Field MaintenanceInstallation Sites

Commercial Kitchens, Convenience Stores

Specialty

Stenner refers to the specialty market asunique or niche applications such as theinjection of additives for reefs, biotechresearch or photography.

Commercial Pool & Aquatic Facilities

Applications

Sanitation, pH ControlInstallation Sites

Hotels, Sports Facilities, Condos

Water Conditioning

Applications

Disinfection, Oxidation, pH controlInstallation Sites

Residential and Commercial Water Wells

Water Treatment

Applications

Legionella Prevention, Corrosion &Scale Control, Algae, pH ControlInstallation Sites

Cooling Towers In Commercial & Industrial Buildings

MARKETS & APPLICATIONS

Water & Wastewater

Applications

Well & Surface Water Treatment, Odor & Stain Control, Wastewater TreatmentInstallation Sites

City Water Facilities, Wastewater Treatment Plants

Time tested, professionally approved

Classic Series Electro-Mechanical

The original Classic Series pump has been revised and enhanced since 1957 while

keeping the well-engineered design intact. This versatile electro-mechanical pump is

easy to service or to convert to another model and remains the most popular with

installers. Common installations include wired to a well pump pressure switch, activated

by a controller or activated by a water meter for proportional dosing.

Single Head

• Adjustable 5%-100%, 2.5% increments or fixed output models

• Up to 40 gpd / 100 psi (151.4 lpd / 6.9 bar)

• Up to 85 gpd / 25 psi (321.8 lpd / 1.7 bar

• Offered as a Tank System

Pump Cover

Designed for Classic series single head adjustable pump,

pump cover provides additional protection.

Double Head Twice the output

• Adjustable output 5%-100%, 2.5% increments or fixed output models

• Up to 34 gpd / 100 psi (128.7 lpd / 6.9 bar)

• Up to 170 gpd / 25 psi (643.5 lpd / 1.7 bar)

QuickPro®

PUMPS

Variable speed or 1:128 injection

M128 Series 1:128 Medicator

The M128 is a 1:128 medicator actuated by water flow from a dry contact water meter

signal for treating livestock water with sanitizers, electrolytes, disinfectants or nutrients.

Unlike water driven proportioners; the M128 is unaffected by scale or solids in the

water source.

• Injects at a fixed rate of one ounce per gallon

• Adjustable pulse dial for contact rates of 1, 2, 4 or 10 pulses per gallon or 1 pulse per liter

• Standby setting can stop the pump, but still keep track of water consumption

• Offered as two models

– 3.5 oz per min. up to 100 psi (105 ml/min / 6.9 bar)

– 8.4 oz per min. up to 25 psi (249.7 ml/min / 1.7 bar)

• Meter System option, pre-assembled on a panel

SVP Series Variable Speed

The SVP Series is a variable speed pump digitally adjusted to increase or decrease the motor

speed. It is designed to respond to a 4-20mA input signal from water treatment controls

to maintain proper water chemistry for industrial, water and wastewater applications.

• Digital keypad for automatic or manual control

• Adjustable dosages 5%-100%, 1% increments, non-scalable

• Up to 40 gpd / 100 psi (151.4 lpd / 6.9 bar)

• Up to 85 gpd / 25 psi (321.8 lpd / 1.7 bar)

PATENTED PUMP HEAD DESIGN

QUICK TUBE REPLACEMENT

ROBUST CONSTRUCTIONQuickPro® Pump Head

Roller assembly collapses and expands.

Inject by flow or time

Econ FP Flow Activated with Control Options

The Econ FP pump is multi-functional and can accept a dry contact signal or a 12-24

VAC/VDC signal from any control equipment that responds to flow. The pump is commonly

installed to interface with a water meter, flow switch or water softener control valve. There

are three operational modes to the run the pump at a set time or set speed.

• Three modes of operation: Seconds, Auxiliary, Flow Switch

• Three 120V models up to 80 psi: 4.5, 16 & 30 gpd (17.0, 60.6 & 113.8 lpd / 5.5 bar)

• Meter System option, pre-assembled on a panel

Econ T Programmable Timer

The Econ T has an integral timer and is programmable offering the ability to set automatic

dosing with flexibility for an injection schedule based on time. Biocide feed and the injection

of enzymes or liquid solar blankets are a few of the practical uses.

• Schedule up to 24 separate on and off events within a 7 day period

• Each timer can be programmed in increments by hour and minute

• Up to 1.92 oz/min / 80 psi (56.94 ml/min / 5.5 bar)

• Up to 1.33 oz/min / 25 psi (39.40 ml/min / 1.7 bar)

1. Attach pump to the wall.

2. Attach to a Stenner tank or a wall.

3. Attach pump to the stand for display or mount to a wall.

Mounting kit and stand sold separately.

There’s more than one way to mount an Econ

1 2 3

ECON PUMPS

Econ Integrator™ pH Control or Disinfection

Designed for water treatment on livestock farms. Powered by electricity, the pump injects

a fixed amount of chemical per water volume determined by a water meter pulse rate.

• Ideal for water line disinfection and pH control

• Additional water meter dedicated to chemical feed is not required

• Inject undiluted chemicals, no stock solutions to maintain

• 4.5, 16 & 30 gallons per day, up to 80 psi (17.0, 60.6 & 113.8 lpd / 5.5 bar)

• Digital keypad

• 20:1 turndown, adjustable in 1% increments

Econ Stennicator 1:128 Medicator

The medicator injects product directly into the water line at a fixed ratio of 1:128;

eliminating a water bypass that can restrict water flow to the drinker lines.

• Inject stock solutions or water solubles

• Activated by a water meter and 120V power

• Three pulse settings: 1 or 10 pulses per gallon or 1 pulse per liter

• 2.7 ounces per minute up to 80 psi (74 ml/min / 5.5 bar)

• A second Stennicator can be added for flow rates up to 5.4 gpm

• Animated video illustrates a Stennicator pump on a farm

http://www.stenner.com/support/videos/videos-stennicator-new-medicator

Designed for the grower and the farmThe Econ Integrator™ is for livestock water treatment and the Econ Stennicator is for 1:128

injection. Activated by a dry contact water meter, either pump can easily adapt to a pre-installed meter.

Both pumps have two practical features; the internal relay and the standby setting.

• If utilizing a house controller, the internal relay repeats the meter signal to register water consumption.

• The standby setting will inactivate the pump for service without disconnecting the lead wires.

• If the pump is in standby, the signal to the controller will not be interrupted.

Quick Release Pump Head

Cover slides on and off for quick access.

PATENTED QUICK RELEASE PUMP HEAD

EFFORTLESS TUBE REPLACEMENT

COMPACT FOR LIGHT DUTY

Accurate and repeatable doses

Proportional Injection System

The Proportional Injection System doses solution that is proportional to the system’s flow

rate based on water volume. The water meter sends a signal to the PCM which actuates

the pump. The system is suited for constant pressure (variable speed) well pumps,

poultry and livestock houses, irrigation, systems with demand based backup wells and

any application with varying flow rates.

• Components include a Classic Fixed Output pump, Pump Control Module (PCM),

3/4" dry contact plastic water meter, Flow Indicator and filter

• Cabinet keeps cords and wires contained and accessible

• Dual system includes two pumps and two PCMs for twice the output

Customize your own Proportional Feed System

To customize your proportional feed installation, purchase the Classic single head

fixed output pump, PCM, water meter and flow indicator separately. The water

meter is offered in plastic or Eco Brass in a variety of sizes and pulse rates.

METER SYSTEMS

Time-saving pre-assembled systems

Econ Meter System

The Econ FP, Econ Stennicator and the Econ Integrator™ are offered as Meter Systems.

• Components include the pump and a 3/4" or 1" dry contact plastic water meter and

flow indicator

• Cabinet keeps cords and wires contained and accessible

• The Stennicator meter system is also offered with two pumps

M128 Meter System

Primarily used for animal health, this convenient pre-assembled system will dose full

strength or stock solutions to livestock water. The pump injects at a fixed rate of one

ounce per gallon and is actuated by a signal from the dry contact water meter.

Components include the M128 pump, and a 3/4" or 1" dry contact water meter with

pulse rates of 1, 2, 4, 10 pulses per gallon or 1 pulse per liter.

Panel and wall mount brackets

included for ready-to-mount

PROPORTIONAL INJECTION

WATER METER ACTIVATED

COMPONENTS PRE-MOUNTED TO A PANEL

TANK SYSTEM

Offered with the Classic Series single

head fixed output or adjustable pump, all

Econs or the M128.

• Offered as 7.5, 15 or 30-gallon,

translucent white or UV gray

• Level indicators

• Tanks sold separately

MIXER

The Mixer delivers rapid and constant

mixing for injecting solutions difficult to

keep in suspension.

• Fits Stenner tanks, 7.5, 15 & 30-gallon

• Sealed mixing head

• Line guard not required

• For intermittent applications

WATER METER

The reed switch water meter provides a

pulsing dry contact signal.

• Power not required

• Plastic: 3/4", 1" or 1 1/2"

• Eco Brass*: 2"

* Certified with WQA under NSF/ANSI-372, low lead.

FLOW INDICATOR

The flow indicator is especially useful

when using black suction & discharge

tubing for a visual reference to confirm

the pump is operating.

FLOW SWITCH

The two wire, paddle style flow switch has

glass fiber reinforced plastic construction

and is available for PVC or copper pipe.

Pre-Mounted Pump Stir It Up

Low Lead or No Lead See It and Believe It Just Right for The Econ FP

PCM

The PCM is a time adjustable controller

that powers the pump. A dry contact

water meter sends a signal to the PCM

which actuates the pump to deliver the

desired dose based upon water volume.

• Four models and operating times:

0.1-1.0, 0.5-5.0, 1-10 & 2-20 (seconds)

• The pre-set time range is adjustable

Inject by Water Volume

MORE THAN PUMPS…

MANUFACTURING SINCE 1957

55years of pumpmanufacturing

3day lead time

98%on-time delivery

OVER

The Stenner Pump Company has been manufacturing peristaltic metering pumps since

1957. What is important to you, has to be important to us and according to our customers

it is performance. Reliable performance means a dependable pump and a dependable

pump reduces service time and expense. A total commitment to customer satisfaction is

the philosophy that remains as the product line grows.

STENNER PUMP COMPANY3174 DeSalvo RoadJacksonville, Florida 32246 USA

Phone 904.641.1666US Toll Free 800.683.2378Fax 904.642.1012

www.stenner.comsales@stenner.com© Stenner Pump Company All Rights Reserved

This information is not intended for specific application purposes. Stenner Pump Company reserves the right to make changes to prices, products, and specifications at any time without prior notice. SB 0614