PERFORMANCE POLYMER SOLUTIONS...and offshore cables/ IEC 60092-360 SHF2 SX0623:CM540U 1.43 170 12.0...
Transcript of PERFORMANCE POLYMER SOLUTIONS...and offshore cables/ IEC 60092-360 SHF2 SX0623:CM540U 1.43 170 12.0...
Advanced LSZH Thermoplastic Compounds
XLPE Cross-Linkable CompoundsMoisture Cure Technology
PERFORMANCE POLYMER SOLUTIONS
Advanced LSZH Cross-Linkable Compounds
THERMODAN® PEXIDAN® HF PEXIDAN®
SACO AEI Polymers Performance Polymers We are a customer-driven compounder offering premium value and innovative polymer solutions for customers in Europe, Asia, MENA, Latin America and North America. Our technology-driven company focuses on optimizing quality, driving efficiency, and adding ultimate value to our customer’s products. We synergistically deliver real value to our customers by developing and manufacturing a full range of Thermoplastic & Thermoset Compounds, Additives and Catalyst Masterbatches for the Wire & Cable, Building & Construction, Pipe & Tubing and Specialty Markets.
SACO AEI Polymers’ expertise and commitment to custom formulating for unique applications delivers world-class product solutions, commercially available off-the-shelf. Technology-infused compounds have allowed us to build industry-recognized brands like our THERMODAN®, PEXIDAN® HF, and PEXIDAN®. Our expertise extends to Non-Halogenated Fire Retardants for the development of compounds that meet or exceed the performance requirements of global regulatory industry standards.
Quality Driven Global Facilities Registered to ISO9001: 2015
SACO AEI Polymers LaboratoriesSACO AEI Polymers’ research & development centers strive to develop industry leading and innovative solutions for our customers. Dedication and investment in research and development has resulted in the fastest go-to-market solutions for our customers. Global facilities are customer-centric, with outstanding formulation chemists, and extensive analytical laboratory capabilities. Formulations are validated by real-life application testing. SACO AEI delivers exceptional technical performance.
We validate formulations and real-world applications through continuous testing in our laboratories to: Optimize Your Quality | Drive Efficiency | Deliver Ultimate Value | Fastest Go-To-Market Solutions
THERMODAN®
Advanced Performance Low Smoke Zero Halogen Thermoplastic Compounds THERMODAN® LSZH Thermoplastic compounds provide the ultimate security for human safety in high occupancy and restricted area facilities. Up to 95% less smoke, low toxicity, low acid gas producing characteristics than Halogenated systems.
LSZH Standards: Complies with IEC | EN | BS | UL | CSA Standards for LSZH Compounds for a wide variety of markets & applications. LSZH Cable Appplications: Power | Energy | Data Cable | Fiber Optic
The Superior Solution for the Ultimate in Security | Human Safety & in Hazardous Environment Industrial Facilities
Performance Characteristics • High Thermal Crack Resistance • High Extrusion Line Speed • High Fire Performance • CPR Compliant• Up to 95% Less Smoke | Toxicity | Acid Gas • UL LS Cable Designation Capable• Low Temperature Flexibility • Sunlight Resistant for Outdoor Use • Outstanding Heat | Abrasion | Chemical Resistance • LEED® Technology Competence• UL 2885 HF Certified
Markets | Applications
• LV Power | Energy | Control | Instrumentation | Mining• Data | Fiber Optic• Transit | Subway• Petrochemical | Oil & Gas • Renewable Energy
THERMODAN® HF Thermoplastic Halogen Free Flame Retardant Compounds
Product DensityElongation
at Break (%)
Tensile Strength
(MPa)
LOI
(%02)Market Key Features | Description
TP521 1.48 180 13.0 33 LV Power Cables Crack and tear resistant/ general purpose for use as insulation and sheathing/ designed for hot and humid climates
TP0832 1.48 165 12.5 35 LV Power Cables Enhanced crack and tear resistant sheathing grade/ designed for hot climates and LPCB applications
TP543C 1.57 170 13.0 41LV Power Cables
Data Cables Fiber Optic/ CPR
Enhanced flame retardancy and physical properties for insulation and sheathing/ crack resistance/
available precolored with UV and anti-termite additives
TP543CBU2 1.57 170 13.0 41LV Power Cables
Data Cables Fiber Optic/ CPR
Enhanced FR and physical properties for insulation and sheathing
TP519C 1.50 170 13.0 34 LV Power Cables Data Cables/ Fiber Optic
Wide process window with high extrusion speeds/ low die drool/ suitable for insulation and sheathing
TP0837 1.50 165 12.0 38 LV Power and Datacom Cables Insulation and Sheathing
High line-speed/ low die drool/ suitable for insulation and sheathing
TP0840 1.50 160 12.5 32 LV Power Cable/ CPREnhanced FR performance with char formation to comply
with BS EN 50290-2-27 for Type HM2 and HD 604 for type HM4 CPR B2 rated
TP0870 1.46 230 11.5 32 Flexible Ribbon and Elevator Cables Highly Flexible for insulation and sheathing
TP0812 1.50 180 12.5 40 Fiber Optic/ Telecom/ Data General Purpose LV Cables CPR
Low shrink/ high performance UL 1666/FT4 high processibility/ low die-drool/ suitable for buffer/ sheathing
TP343 1.64 232 11.5 45 Fiber Optic/ Telecom/ Data General Purpose LV Cables/ CPR High FR for Cat 5 & 6 Copper & Fibre Optic Cables
TP0851 1.40 160 12.0 - LV Fire Security and Fire Survival Cables
Ceramifiable sheathing compound emergency alarm/ communications
lighting and electrical circuit integrity cables
THERMODAN® TP 521
Thermoplastic, Low Smoke, Halogen Free, Flame Retardant Compound for Cable Insulation & Sheathing
This is a flame retardant, low smoke, thermoplastic compound which has been specially developed to meet the requirements of limited toxic and corrosive fume emission, having good moisture resistance and hot pressure performance.
TP 521 has been specially developed to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; BS EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP 521 have passed the 3m3 smoke density chamber test to IEC 61034-2.
Test Test Method Unit Typical Value Physical Properties and Mechanical Properties Density BS EN ISO 1183-3 g/cm3 1.48 Tensile strength IEC 60811-501 N/mm² 13 Elongation at break IEC 60811-501 % 180 Tear Strength BS 6469-99.1 N/mm 7 Melt Flow Rate (21.6kg @150°C) AEI Method g/10 minutes 6 Hardness (N) Shore A - 90
Typical Ageing Behaviour After 7 Days at 100° Tensile Strength IEC 60811-401 % variation -10 Elongation at Break IEC 60811-401 % variation +13 Thermo Mechanical Properties Hot pressure deformation at 100°C IEC 60811-508 % 30 Cold bend test at -50°C IEC 60811-504 - pass Elongation at break at -30°C IEC 60811-505 % 60 (pass) Cold impact at -30°C IEC 60811-506 - pass Thermal crack resistance @ 80°C AEI internal method - pass
Fire and Smoke Properties Oxygen Index BS ISO 4589-2 % 33 Temperature Index BS ISO 4589-3 °C 270 Halogen Acid Gas Evolution IEC 60754-1 % <0.5
Electrical Properties at 90°C Insulation Constant Ki at 20°C BS EN 50395 MΩ.km 7.7 Insulation Constant Ki at 90°C BS EN 50395 MΩ.km 0.057
Fluid Resistance Time (hrs) Temperature °C % Variation in TS % Variation in EBASTM No2 4 23 9 2ASTM No2 4 70 14 24ASTM No2 4 100 28 48
THERMODAN® TP 543C
Thermoplastic, Low Smoke, Halogen Free, Flame Retardant Compound for Cable Insulation and Sheathing
A flame-retardant low-smoke thermoplastic compound which has been specially developed to meet the requirements of limited toxic/corrosive fume emission and having high fire retardancy as indicated by a high oxygen index.
TP 543C has been specially developed to comply with the requirements of BS 7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP 543C have complied with IEC 332 part 1 and 3 fire tests.
Test Test Method Unit Typical Value
Physical Properties and Mechanical Properties Density BS EN ISO 1183-3 g/cm3 1.54 Tensile Strength IEC 60811-501 N/mm² 13 Elongation at Break IEC 60811-501 % 170 Tear Strength BS 6469-99.1 N/mm 6 Melt Flow Rate (21.6kg @150°C) AEI Method g/10 minutes 7
Typical Ageing Behaviour After 7 Days at 100° Tensile Strength IEC 60811-401 % variation -12 Elongation at Break IEC 60811-401 % variation +12
Thermo Mechanical Properties Hot Pressure Deformation at 90°C IEC 60811-508 % 35 Cold Bend Test at -30°C IEC 60811-504 - pass Elongation at Break at -30°C IEC 60811-505 % 50 (pass)
Fire and Smoke Properties Oxygen Index BS ISO 4589-2 % 41 Temperature Index BS ISO 4589-3 °C >300 Halogen Acid Gas Evolution IEC 60754-1 % <0.5
Electrical Properties at 90°C Insulation Constant Ki at 20°C BS EN 50395 MΩ.km 7.7 Insulation Constant Ki at 90°C BS EN 50395 MΩ.km 0.057
PEXIDAN® HF
Low Smoke Zero Halogen Moisture Cure Compounds
PEXIDAN® LSZH Moisture cure compounds provide the ultimate security for human safety in high occupancy and restricted area facilities providing low smoke, low toxicity & low acid gas producing characteristics.
Performance Characteristics | Technology Advantages • Very High Thermal Crack Resistance • High Cable Productivity • High Flame Performance IEC | EN | UL | CSA • CPR Compliant • Low Temperature Flexibility to -40°C • Outstanding Heat | Abrasion | Chemical Resistance• High Oil Res I & II, SHF2, Fluids • LOCA approved• Up to 95% Less Smoke | Toxicity | Acid Gas • UL LS Cable Designation Capable• Sunlight Resistant for Outdoor Use • LEED® Technology Competence • UL 2885 HF Certified
Markets | Applications• Meets IEC | UL | CSA | BS Standards • LV Power | Energy | Data | Fiber Optic | Control | Instrumentation• High Occupancy | Restricted Area Facilities • Transit | Subway | Airports | Government | Hospitals• Hazardous Industrial Environments • Petrochemical | Mining | Oil & Gas | Substation
PEXIDAN® HF Silane Crosslinkable Halogen Free Flame Retardant Compounds
Product DensityElongation
at Break (%)
Tensile Strength
(MPa)
LOI
(%02)Market Key Features | Description
SX0612:CM601 1.47 170 14.0 33 Building Wire CPR
Available in standard/ 125ºC working temperature scorch resistant BS7211 and BS EN 50363 (EI5)
Enhanced FR and ambient cure versions
SX545:CM540U 1.49 140 12.0 32 Building Wire Flexible/ general purpose to meet BS7211 and BS EN 50363 (EI5)
SX559:CM540U 1.49 165 14.0 36 Building Wire Nuclear CPR
125ºC Working temperature/ enhanced FR for insulation & sheathing LOCA Approved
SX407K:CM424 1.37 140 12.0 32 Nuclear Available in standard/ 125ºC working temperature LOCA approved insulation and sheathing compound
SX0622:CM540U 1.43 160 10.5 35 OPG Marine
Flexible/ oil resistant sheathing compound for marine and offshore cables/ IEC 60092-360 SHF2
SX0623:CM540U 1.43 170 12.0 34 RailwayFlexible/ oil resistant sheathing compound for
railway cables IEC 60092-360 SHF2 BS 7655-2.6 SW4 and generally to BS EN 50264
SX0650:CM601 1.47 180 13.0 34 PV Solar PV Solar insulation/ sheathing with FR and UV resistance to meet BS EN 50618 and TUV
SX0651:CM540U/1 1.29 275 14.3 35UL Std.
Building Wire LV Insulation
UL 44, 90 deg. C/ wet electricals rated/ XHHW-2 FT2 UL bulletin listed
SX0652:CM540U/1 1.36 180 13 35 UL Std. Jacket
UL1277 jacket for single- and multi-conductor tray-rated LV cables fiber optic cable jacket capable low
smoke zero halogen for hazardous industrial & commercial environments petrochemical/ transit/
offshore oil platforms/ substation control UL1277 Jacket
PEXIDAN® HF SX 0650
Solar UV Resistant, Silane Crosslinkable, Halogen Free, Flame Retardant Compound for Photovoltaic Insulation & Sheathing
SX 0650:CM601 system is a low smoke, low fume, fire retardant silane crosslinkable compound, which can be processed like a thermoplastic material at high output rates. The graft component, SX 0650, is mixed with the crosslinking catalyst masterbatch, CM601, generally in the ratio 95:5. The SX 0650:CM601 system has been developed to meet specification requirements TUV 2Pfg1169:2007 & EN 50618:2014.
Test Test Method Unit Typical Value
Physical Properties and Mechanical Properties Melt Flow Rate (21.6kg @150°C) SACO AEI Method g/10 minutes 11 Tensile Strength IEC 60811-501 N/mm2 13 Elongation at Break IEC 60811-501 % 180 Density BS EN ISO 1183-3 g/cm3 1.47
Typical Ageing Behaviour After 7 Days at 150° Tensile Strength IEC 60811-401 % variation +15 Elongation at Break IEC 60811-401 % variation -15 Thermal Endurance 120°c BS EN 60216-1 hours >20,000 BS EN 60216-2
Cure Assessment by Hot Set Test Elongation Under Load (20N/cm 2 at 250°C) IEC 60811-507 % 30 Permanent Elongation After Cooling IEC 60811-507 % 0
Thermo Mechanical Properties Pressure Test at High Temperature 140°C IEC 60811-508 % 35
Resistance Against Acids EN 60811-404 Pass& Alkaline Solutions
Low Temperature Properties Cold Impact @ -40°C IEC 60811-506 No cracks Cold Bending @ -40°C IEC 60811-504 No cracks
Weathering/UV Resistance BS EN 50618 Annex E PassDynamic Penetration BS EN 50618 Annex D PassNotch Propagation TUV 2Pfg 1169 Pass
Fire and Smoke Properties Vertical Flame Propagation BS EN 60332-1-2 Pass Halogen Acid Gas Evolution IEC 60754-1 % <0.5
Electrical Properties at 90°C Insulation Resistance at 90°C BS EN 50395 MO.km 12 Long Term Resistance of Insulation to D.C.
PEXIDAN® HF SX 0612S
Low Smoke, Low-Toxicity, Halogen-Free, Flame-Retardant Compound for Insulation of LV Cables and Sheathing of All Types of Cables
SX 0612S is a low smoke and low fume, fire retardant, silane-crosslinkable compound that can be processed like a thermoplastic material at high output rates. The crosslinking catalyst masterbatch CM601 or CM602 is mixed with the SX-0612S graft component at an addition rate of between 5 and 10%, the rate dependent upon the extruder residence time.
SX 0612S combines good mechanical and electrical properties with enhanced fire retardancy to meet demanding insulation specifications such as IEC 60092-351/HF90, BS EN 50363-5 for EIS, BS EN 50525-3-41 and BS7211. SX 0612S is also suitable for sheathing of cables requiring high levels of fire retardancy.
Test Test Method Unit Typical Value Physical Properties and Mechanical Properties Melt Flow Rate (21.6kg @150°C) SACO AEI Method g/10 minutes 15 Tensile Strength IEC 60811-501 N/mm2 14 Elongation at Break IEC 60811-501 % 170 Density BS EN ISO 1183-3 g/cm3 1.47
Typical Ageing Behaviour After 7 Days at 150° Tensile Strength IEC 60811-401 % variation +15 Elongation at Break IEC 60811-401 % variation -10
Cure Assessment by Hot Set Test (Forced Cured at 80°C in Water) Elongation Under Load (20N/cm 2 at 250°C) IEC 60811-507 % 30 Permanent Elongation After Cooling IEC 60811-507 % 0
Thermo Mechanical Properties Hot Pressure Deformation (100°c, K=1) IEC 60811-508 % 35
Fire and Smoke Properties Smoke Density ASTM 2843:2004 % <3.5 Oxygen Index BS ISO 4589-2 % 33 Temperature Index BS ISO 4589-3 oc 245 Halogen Acid Gas Evolution IEC 60754-1 % <0.5 Corrosivity of Gases IEC 60754-2 pH 4.6 Conductivity of Gases IEC 60754-2 µSiem 13
Electrical Properties at 90°C Insulation Resistance BS EN 50395 MO.km 5 Insulation Resistance Constant (K) BS EN 50395 MO.km 1.5 Volume Resistivity BS EN 50395 Ohm.cm 4.4 X 1012
PEXIDAN® HF SX 0622
Oil Resistant, Flexible, Halogen Free, Flame-Retardant, Silane-Crosslinkable Sheathing Compound for Marine Cable Applications
SX 0622 is a silane-crosslinkable, moisture-cure, flexible and flame-retardant polyolefin compound with good oil-resistant properties. The graft component SX-0622 is mixed with a crosslinking catalyst masterbatch CM540U in a general ratio of 97:3.
SX 0622:CM540U compound has been developed to meet the requirements of IEC 60092-360 SHF2 shipboard cables standard exhibiting good flexibility, oil-resistance and tough sheathing protection.
Test Test Method Unit Typical Value Physical Properties and Mechanical Properties Melt Flow Rate (21.6kg @150°C) SACO AEI Method g/10 minutes 6 Tensile Strength IEC 60811-501 N/mm2 10.5 Elongation at Break IEC 60811-501 % 160 Density BS EN ISO 1183-3 g/cm3 1.43
Cure Assessment by Hot Set Test (Forced Cured at 80°C in Water) Elongation Under Load (20N/cm 2 at 200°C) IEC 60811-2-1 % 60 Permanent Elongation After Cooling IEC 60811-2-1 % 0
Heat Ageing Behavior After 168 Hours at 120°c Tensile Strength IEC 60811-401 % variation +25 Elongation at Break IEC 60811-401 % variation -5
Flammability Properties Oxygen Index BS ISO 4589-2 % 35 Halogen Acid Gas Evolution IEC 60754-1 % <0.5
Cold Temperature Properties Low Temperature Brittleness ASTM D638 oc -25
Fluid Resistance
Fluid Time Temperature Variation in Tensile Strength Variation in Elongation at Break
Hours oc % % IRM902 24 100 -28 -15
PEXIDAN®
Our Sioplas-type moisture cross-linkable polyolefins are available for a wide variety of end-use applications including wire insulation and jacketing, potable water & radiant heat pipe, injection molded fittings, heat shrinkable tubing and other molding and profile applications requiring elevated-temperature dimensional stability. Leading the market for three decades, our PEXIDAN® compounds feature outstanding long-term performance with superior strength, toughness, and resistance to heat/cold, chemicals, abrasion and creep. PEXIDAN® compounds offer the best of crosslinked olefins with the ease of processing found in thermoplastics and are available in non-FR, halogenated FR and LSZH versions. PEXIDAN® compounds are well-suited for most processing techniques and post-curable by steam, hot water or even ambient means.
MOISTURE CURE CROSSLINKABLE NON FR XLPE
Characteristics | Technology Advantages • Sioplas Moisture Cure technology• Ambient cure • Low Capital Cost Investment vs CV / e-beam• Long term production Extrusion Capability • Wide Processing window • Excellent Mechanical Strength and Toughness• Outstanding heat, Abrasion and Chemical resistance • Field Performance Proven for 40+ years • Consistent easy to use technology • Available in UV stabilised version • Version available for 125 degrees C operation
Markets | Applications• LV and MV Cable Insulations • IEC 60502 compliant • NFC 33-209 Cable Torsade compliant
PEXIDAN® SX Silane Crosslinkable Compounds for Low and Medium Voltage Cables
Product DensityElongation
at Break (%)
Tensile Strength
(MPa)Technology Market Key Features | Description
SX522A:CM401 0.925 450 18.0 Moisture Cure, Ambient Cure
LV Power Cable Insulation Ambient cure/ general purpose/ 90ºC rated
SX522AL:CM401 0.925 450 18.0 Moisture Cure, Ambient Cure
LV Power Cable Insulation
Ambient cure/ general purpose/ 90ºC rated lubricant additive package to improve processing
SX522A:CM401BU 0.95 450 18.0 Moisture Cure, Ambient Cure
LV Power Cable Insulation
Ambient cure with carbon black masterbatch for UV-resistant serial cable insulation
SX523:CM493 0.95 450 18.0 Moisture Cure LV Power Cable Insulation
High carbon black content to meet UV for aerial Cable Torsade insulation to NFC 33-209
SX546:CM497CD 0.92 500 24.0 Moisture Cure, Ambient Cure
LV Power Cable Insulation Ambient Cure XLPE/ 125ºC Rated
SX409NT:CM401 0.93 350 18.0 Moisture Cure MV Power Cable Insulation
Tree retardant 33kV rated for long-term retention of dielectric strength
SX505NT:CM401 0.90 350 9.0 Moisture CureLV, MV
Power Cable Insulation
EPDM Rubber based/ tree retardant grade with long-term retention of dielectric strength
SX554:CM493 0.90 420 9.5 Moisture CureLV, MV
Power Cable Insulation
1kV-10kV XL-EPDM flexible compound processable on thermoplastic extrusion equipment
PEXIDAN®
MOISTURE CURE CROSSLINKABLE HALOGENATED XLPE
High Performance Characteristics | Technology Advantages • UL 44 Bulletin Recognized • Excellent Mechanical Strength & Toughness• Sioplas Moisture Cure Technology • Up to 40% Improvement-Processing-Downtime• Low Capital Cost Investment vs CV | ebeam • Outstanding Heat | Abrasion | Chemical Resistance• Long Term Production Extrusion Capability • Field Performance Proven for 30+ Years• Wide Processing Window • Consistent | Easy to Use Technology• High Flame Performance UL | CSA • Halogenated | Non-Halogenated LSZH Formulations• High Performance Oil & Gas Res I & II • UL & CSA Sunlight Resistant for Outdoor Use
High Performance Markets | Applications• UL | LV Power Cable Insulations • UL | XHHW-2 | RHW-2 | USE-2 | RHH | SIS | UL4703 PV | UL854 | UL758
• CSA | LV Power Cable Insulations • CSA | RW90 | RWU90 | RPV90 | RPVU90 | CL1251 | CL1252 | CL1503 • UL | CSA Photovoltaic | Solar Wire • LSZH | Transit | Government | Airports | Hospitals • Automotive Primary & Battery Cables • Automotive SAE J1128 & ISO 6722 T3
PEXIDAN® Halogenated FR Systems
Product | System Market Description UL | CSA Specific Gravity LOI
Elongation at Break
(%)
Tensile Strength
(psi)
Flame & Smoke Rating
PEXIDAN® X/T LV Power Cable 90°C wet rated insulationUL 44 XHHW-2 / RHW-2 / SIS
UL 854 / USE-2 CSA RW90 / RWU90
1.01 23 375 2200 UL/CSA FT2
PEXIDAN® X/T-UV LV Power Cable 90°C wet rated insulation sunlight resistant
Colorable 6 AWG UL 44 / XHHW-2 / RHW-2 SIS / UL 854 / USE-2 / SUNRES 1.01 23 425 2350 UL/CSA FT2
PEXIDAN® X/T-UV2 LV Power Cable 90°C wet rated insulation sunlight resistant all sizes
Colorable All Sizes UL 44 / XHHW-2 RHW-2 / SIS / PV Cable UL 4703
UL 854 / USE-2 / SUNRES1.01 23 425 2350 UL/CSA FT2
PEXIDAN® V/T LV Power Cable 90°C wet rated insulation VW-1 flame rated
UL 44 VW-1 XHHW-2 / RHW-2 / SIS PV Cable UL 4703
CSA RW90 / RWU901.30 27 275 1850 UL/CSA VW-1
PEXIDAN® V/T-2 LV Power Cable 90°C wet rated insulation VW-1 flame rated
UL 44 VW-1 XHHW-2 / RHW-2 / SIS PV Cable UL 4703
CSA RW90 & RWU90 UL CT-Use / IEEE 1202 / FT4 1/0 and Larger
1.32 27 400 2200 UL/CSA VW-1
PEXIDAN® V/T-2UV LV Power Cable90°C wet rated insulation
VW-1 flame rated sunlight resistant
Colorable UL 44 VW-1 XHHW-2 / RHW-2 / SIS PV Cable UL 4703 / SUNRES
CSA RW90 / RWU90 / RPV90 / RPVU90 UL CT-Use / IEEE 1202 / FT4 1/0 and Larger
1.30 27 300 1850 UL/CSA VW-1
PEXIDAN® H/T Appliance Wire 150°C dry rated appliance wire insulation
150°C Rated UL 758 AWM Style 3173 & 3321 CSA AWM / CL1251 / CL1252 / CL1503 / FT2 1.08 24 300 2300 UL/CSA FT2
PEXIDAN® J/T Automotive 125°C dry rated automotive insulation
Automotive Primary Insulation SAE J1128 ISO 6722 T3 1.13 25 300 2300 SAE 45 Degree
PEXIDAN® A-3021 SpecialtyHighly flexible and
heat resistant moisture crosslinkable TPO
- 0.90 - 400 2500 -
SHEBOYGAN WISCONSINHQ | Research | Manufacturing
SANDWICH UK Thermoplastic & Crosslinkable Polymer Compounds
SHANGHAI CHINA Import & Export
NEW DELHI INDIAThermoplastic & Crosslinkable Polymer Compounds
TORINO ITALYMolding Machinery + Tooling Manufacturer
POLYMERLOCATIONS
JOHOR MALAYSIA Thermoplastic & Crosslinkable Polymer Compounds
AURORA OHIO Research & Manufacturing
POLYMERS SALES &CUSTOMER CARE OFFICES
AESSE SALES & DISTRIBUTION
SALES & DISTRIBUTION
EXECUTIVEHEADQUARTERS
OUR GLOBAL PRESENCE
+44 1304 616171 tel | +44 1304 616170 fax | [email protected] | www.sacoaei.com
SANDWICH INDUSTRIAL ESTATE | SANDWICH | KENT CT13 9LY | ENGLAND | UK