Pelatihan Dmi Presentation
-
Upload
erra-twins -
Category
Documents
-
view
46 -
download
18
description
Transcript of Pelatihan Dmi Presentation
AgendaWhat is Grundfos Remote Management?
System Features
Technical Details
Popular Applications.
Benefits of Grundfos Remote Management
What is Grundfos Remote Management?Easy-to-install, low-cost monitoring and management of pumping systems.
Web access to reports and trend data for all relevant employees.
Automatic event log and service log for all pumpsin the system.
Plug n´ Play integration with Grundfos Controls – monitoring of all pumps and sensors.
Centrally hosted database and application server. Users only need an Internet PC.
Alarms on SMS and Email distributed according to built-in week schedule.
Pre-defined drivers and lay-out for Plug n’ play monitoring
- Waste water pits
- Pressure Booster Systems
- Circulator pumps
- Fire Protection Systems
- External VFD
- E Pumps (integrated VFD)
- Motor Protection
- I/O Modules
Complete overview of all your pump installations organized in a logical navigation tree supported by your own site map or system drawing.
Installation is plug ‘n play in an easy-to-use 4-step wizard. No programmers needed to setup the system.
…and you’re products are monitored.
Step 1: Enter phone number and modem id.
Step 2: Give your installation a name.
Step 3: Let the modem auto-discover your Grundfos pumps and controls.
Step 4: Select the alarms you want to receive and how you want them to be delivered. (SMS or Email).
Optimize pump service by keeping track of operating hours and number of starts for each pump. Access online service manuals and videos directly.
Automatic log and trend of the key performance indicators in your system to document performance and reveal potential for improvement.
Get access to live data on your mobile phone. Acknowledge alarms and verify communication on-site during installation.
How does remote management help you save money?
• Follow the Specific Energy (kWh/ m3) of your system to reveal performance degradation over time due to e.g.:
– Normal wear and tear.– Leakage in the system.– Deposits in pipes.
• Service according to actual operating data such as:
– Operating hours.
– Number of pump starts.
– Increase in current consumption.
– Increase in motor temperature.
• Cut back on-site inspections.
– Why visit sites that you know are ok?
• Automate reporting on:
– Energy consumption
– Pumped volume
– …and other pumping system KPIs
System Description
Public GPRS Network
Local SMS Gateways(One per country)
Central Hosting Center Web Server and database
Grundfos WAN (Internet) Secure Internet
(SSL 128 bit)
Network level
CIU271GPRS and SMS ModemMultipurpose I/O deviceIntelligent data logger
MPC
MGE
Magna
DME
SP/SQ
CUE
MP204
IO351
I/O devices- Level sensors- Flow sensor- Pressure sensor- Temperature sensors- Pumps- Door alarms- Etc.
IO112
GENIBus
Site level
One CIU271 modem will monitor a network of Grundfos products
IO devices Controls E-Pumps Magna Pumps Motor Protection(MP204)
Drives (CUE)
What will MP204 tell you about the pump?
Insulation resistance before start-upMotor TemperatureOverload/underloadOvervoltage/undervoltagePhase sequenceDry running
Get alarms if thresholds are crossed for:Phase missingPower factorPower consumptionHarmonic distortionRun and start capacitor (single-
phase)…and more
Monitor operational profile – number of starts and operating time
Monitor current consumption
Monitor and report on energy consumption
What will CUE tell you about the pump?
Leakage CurrentMotor / Bearing TemperatureOverload / underloadOvervoltage/undervoltageMissing Phase
Get alarms if thresholds are crossed for:Motor phase failureDry runningSensor faults External Fault SignalSensor limits
…and more
Monitor specific energy (when flow meter is attached).
Monitor Speed / frequency of the pump
Monitor and report on energy consumption
Monitor ANY switch, sensor or meter using IO modules from Grundfos
Flow meters PT 100/1000 Temp. sensors
Pressure sensors Ultra sonic level sensors
Dry contacts from alarm panels
…and all other signals (0/4-20mA, 0-10V, Pulse)
Level switches
Modem variants
CIM270 Can be mounted inside Dedicated Controls and HM Large
CIU271
GPRS data logger for GENIbus networks with Built-in general purpose IO Board:2 digital Inputs2 Configurable Inputs (Digital or 0/4-20mA/0-10V) 1 Relay output ( (230V 2A)1 Signal output (0-10 V)1 Temperature input (PT100/PT1000)
CIU270
GPRS data logger for GENIbus networks. (Cost reduced version with no built-in IO capability).
Grundfos communication optionsCost
Functionality
Grundfos Remote
Management
CIM/CIU 100 LONCIM/CIU 150 ProfibusCIM/CIU 200 Modbus RTUCIM/CIU 300 BACnet MS/TPCIM/CIU 250 GSM/GPRS/SMS
SCADA/BMS
Systems
CIU250 Basic SMS
Coming in 2010
S E P R I Z A L
Service Department PT. Grundfos Pompa Direct: (021) 4606909Mobile: 0811917562E-Mail: [email protected]
Questions?