PEKA SAINS TINGKATAN 2 - 3
Transcript of PEKA SAINS TINGKATAN 2 - 3
7/27/2019 PEKA SAINS TINGKATAN 2 - 3
http://slidepdf.com/reader/full/peka-sains-tingkatan-2-3 1/6
PEKA SAINS TINGKATAN 2
Title / Tajuk Application of Frictional Force
Aim
Tujuan
To study the effects of different types of surfaces
on the magnitude of fractional force
Untuk mengkaji kesan jenis permukaan padamagnitud daya geseran
Problem
statement
Pernyataan
masalah
How does different type of surfaces affect the
magnitude of frictional force?
Bagaimana jenis permukaan yang berlainan
mempengaruhi magnitud daya geseran?
HypothesisHipotesis
The rougher the surface, the greater is themagnitude of frictional force on the wooden
block
Lebih kasar jenis permukaan, lebih besar
magnitud daya geseran pada blok kayu
Variable
Pembolehubah
Manipulated: type of surface
Dimanipulasi: jenis permukaan Responding: magnitude of frictional force
Bergerak balas: magnitud daya geseran
Controlled: size of the wooden block
Dimalarkan: saiz blok kayu
Apparatus
Alat
Spring balance, thread
Neraca spring, benang Materials
Bahan
Wooden block, table, oil/grease, aluminium foil,
sandpaper, graph paper
Blok kayu, meja, minyak / gris, aluminium foil,
kertas pasir, kertas graf
Procedure
Prosedur
1. The apparatus is set-up as shown in the
diagram above. Alat adalah disediakan seperti yang
ditunjukkan dalam rajah di atas.
7/27/2019 PEKA SAINS TINGKATAN 2 - 3
http://slidepdf.com/reader/full/peka-sains-tingkatan-2-3 2/6
2. The wooden block is hooked to a spring
balance with a thread and place on the table.
Blok kayu diganting pada neraca spring
dengan benang dan diletakkan di atas meja. 3. The wooden block is pulled along the table
and the reading of the spring balance is taken
when the block starts to move.
Blok kayu ditarik di meja dan bacaan neraca
spring diambil apabila blok bermula untuk
bergerak. 4. Step 3 is repeated by pulling the wooden
block on three other different types of
surface.
Langkah 3 diulangi dengan menarik blok kayu
diatas jenis yang berbeza permukaan.
5. All the readings were recorded in the table.Semua bacaan direkodkan dalam jadual.
7/27/2019 PEKA SAINS TINGKATAN 2 - 3
http://slidepdf.com/reader/full/peka-sains-tingkatan-2-3 3/6
Observation
Pemerhatian Type of
surface
Jenis
permukaan
Condition of
surface
Keadaan
permukaan
Reading of
spring balance
(N)
Bacaan neracaspring (N)
Wooden
table
Meja kayu
Rough
Kasar
5.8 N
Aluminium
foil Aluminium
foil
Smooth
Licin
4.5 N
Oil
Minyak
Very smooth
Sangat licin
3.6 N
Sandpaper
Kertas pasir
Very rough
Sangat kasar
6.5 N
Discussion
Perbincangan
1. Based on the collected data, draw a bar graph
to show the effect of different types of
surfaces on the magnitude of frictional force.
Berdasarkan data yang dikumpul, lukiskan graf
bar untuk menunjukkan kesan jenis permukaan pada magnitud daya geseran.
2. Between the different types of surfaces, which
give the
Antara pelbagai jenis permukaan, yang
manakah memberikan
a. Greatest magnitude of frictional force?
Magnitud terbesar bagi daya geseran?
7/27/2019 PEKA SAINS TINGKATAN 2 - 3
http://slidepdf.com/reader/full/peka-sains-tingkatan-2-3 4/6
The surface of sandpaper.
Permukaan kertas pasir.
b. Lowest magnitude of frictional force?
Magnitud terbesar bagi daya geseran?
The oily surface.Permukaan berminyak.
3. What is the condition of the surface that
causes the
Apakah keadaan permukaan yang
menyebabkan a. Increase of frictional force on the wooden
block?
Daya geseran pada blok kayu meningkat?
The rough surface.
Permukaan kasar.
b. Decrease the frictional force on thewooden block?
Daya geseran pada blok kayu
mengurangkan?
The smooth surface.
Permukaan licin.
4. Arrange in decreasing order the types of
surfaces based on the magnitude of frictional
force.
Susun dalam urutan menurun jenis permukaan
berdasarkan magnitud daya geseran.
Sandpaper, wooden table, aluminium foil, oil.
Kertas pasir, meja kayu, aluminium foil,
minyak.
7/27/2019 PEKA SAINS TINGKATAN 2 - 3
http://slidepdf.com/reader/full/peka-sains-tingkatan-2-3 5/6
5. Define operationally “frictional force”.
Nyatakan definasi operasi bagi "daya
geseran".
Frictional force is the reading of spring balancewhen the wooden block is pulled on the
surface.
Daya geseran adalah bacaan neraca spring
apabila blok kayu ditarik di permukaan.
6. Based on the experiment, state therelationship between the frictional force and
the types of surfaces.
Berdasarkan eksperimen ini, nyatakan
hubungan di antara daya geseran dan jenis
permukaan.
Frictional force depends on the types of surfaces.
Daya geseran bergantung kepada jenis
permukaan.
7. What is your inference from the results of the
experiment? Apakah inferens anda daripada keputusan
eksperimen?
The reading of the spring balance is bigger
because the contact surface is rougher.
Bacaan neraca spring adalah lebih besar
kerana permukaan sentuhan adalah kasar.
7/27/2019 PEKA SAINS TINGKATAN 2 - 3
http://slidepdf.com/reader/full/peka-sains-tingkatan-2-3 6/6
8. Suggest one way to decrease frictional force
on the surface of the table.
Cadangkan satu cara untuk mengurangkan
daya geseran pada permukaan meja. Friction on the table can be reduced by
applying the grease on the surface of the
table.
Geseran di atas meja boleh dikurangkan
dengan menggunakan minyak gris pada
permukaan meja. Conclusion
Kesimpulan
1. The rougher the surface, the greater is the
magnitude of frictional force on the wooden
block.
Lebih kasar permukaan, lebih besar magnitud
daya geseran pada blok kayu.
2. The hypothesis is accepted.
Hipotesis diterima.