PDU6-SW USER GUIDE

All components used in this unit conform to current RoHS, CE & UL certification BS1363A, BS1362, SASO 2203

(EMI:EN55022 (CISPR22) Class B; EN61000-3-2,3 EMS:EN61000-4-2,3,4,5,6,8,11; Light industry level, criteria A)

E&OE

Designed & Made in the UK by RACKZ LTD for the Penn Elcom Group

Unit 10 21-23 Wood Road - Kingswood - BRISTOL – BS15 8DT - UK

Tel: (+44) 01179352727 Fax: (+44) 01179352733 - Email: racksales@rackz.biz Web Site: www.rackz.co.uk

RED Power Indicator

Shows there is AC power to the unit.

It is independent of the Switches

Should this not be ON then -

1st check the power is connected

2nd check the plug fuse & replace

if necessary.

PLEASE NOTE:

In the event of a Power Surge or

Lightning Strike the protection

circuit will be activated.

This will result in a blown fuse.

The brackets can be fitted

in any of 6 positions to suit

the required application

Earth Strap Point

For attachment to the rack

unit

Vertical Set Back Application

Horizontal Rack Rear

Set Back Application