PDMS Modules
-
Upload
mohammed-waseem -
Category
Documents
-
view
23 -
download
8
description
Transcript of PDMS Modules
Plant design management system (PDMS) and it’s related application provides a powerful suit of facilities for the creation analysis documentation of a real-life plant in three dimensional representation in a logically interconnected system.
1. Features Of Plant Design And Management System (PDMS)
Concurrent engineering
Controlled catalogue database
Automatic drawing production
Isometric generation
Material takeoff
Report generation
Clash checking
Interfacing with third party software
Project progress monitoring
Customization -PML Programming
Training and maintenance
How PDMS is organized
How PDMS is organised
Different Modules In PDMS
The different modules available in PDMS are listed below: Monitor
Design
Diagrams
Schematic Model Manager
Spooler
Draft
Isodraft
Paragon
Specon
Propcon
Lexicon
Admin
Modules in PDMS
1. Admin module in PDMS
PDMS Project Administration: The Project is a fundamental concept in PDMS, and all work takes place within a project. Everything that is defined in PDMS ADMIN is specific to a given project, although it is possible to read databases in another project.This module is only used by project PDMS administrator to create piping specification required as per the project material specification.
The following are the key operation in admin module1. Creation of MDB2. Creation of DBS3. Creation of TEAM4. Creation of users5. Access control6. Replication7. Reconfigure8. Communication9. Backtracking10. Session control
Admin in PDMS
2. Monitor Module in PDMS
Monitor allows the PDMS user to enter into a pdms project . This is a real life simulation of working in a controlled working environment . This feature controls unauthorized access to the project and also checks the user status for access.This module gives the project information which has been assigned during the PDMS project set up. The information like Project, Project name, Project code, Project Number is
available in this module. It also lists the different MDB available in the project which can be used.
Monitor module in PDMS
3. Design Module in PDMS
This module has different sub-modules like General, Equipment, Pipework, Cable Trays, HVAC Designer, Structures, Design Templates & Cabling System. Each of the sub-module is used by the modeler to model or create a graphical representation of the component required as per design requirement. There are many general commands and sub-module specific commands which are available to the user in different sub-module.
Design module in PDMS
Design module screen in PDMS
4. Isodraft Module in PDMS
ISODRAFT can be used to produce isometric plot files of pipes and networks, from either the Design or Fabrication databases, to your own required standards. These drawings can be used for pipe work fabrication, as well as during on-site erection.The isometrics produced can be fully dimensioned and annotated to ensure that you find them easy to use and unambiguous.PDMS administrator has to create the back-up project template so that all the isometrics are extracted in the
project required. This back-up template is available to the modeler when he starts extracting the isometrics using the standard isometric utility.Using isodraft system isometrics can also be extracted.
Isodraft module in PDMS
Isodraft enables you to do the following- System isometric showing a complete piping network and equipment trim- Automatic spool identification- User defined Drawing Format- Automatic splitting of complex Drawing- Automatic isometric including the associated material list- Standard isometric of pipe zone or spool
5. Draft Module in PDMS
This module is used to extract project general arrangement drawing. Using this module all discipline including piping, structural, electrical etc. extract all the required general arrangement drawing. PDMS administrator has to create the back-up project template so that all the general arrangement drawings are extracted in the project required. This back-up template is available to the modeler when he starts extracting the isometrics using the standard isometric utility.Extacting general arrangement drawing using draft module helps user to use annotation & tagging as required.
Draft module pdms screen
Draft enables you to do the following- View creation- Dimensioning
- Annotating- Labelling- 2-D drafting
6. Paragon Module in PDMS
Paragon is used to input and modify the component catalogue stored in the PDMS Project Database .It is similar to the Manufacturers catalogue which we refer while conventional designThis module is only used by project PDMS administrator to create different catalogue, section & categories required in the project. PDMS administrator also uses this module to create project bolt table & connection table (Coco table) as per project specification.
Paragon module display screen
Paragon enables you to do the following- Specifying the- Geometry- Connection information- Obstruction feature
7. Specon module in PDMS
Specon is used to input and modify project specification. This is similar to manual pipework which assists and constrains the designer in the selection of componentsSpecon enables you to do the following- Specifying the detail text- Pipng symbol- Catalogue reference
8. Lexocon module in PDMS
Lexicon allows the PDMS Administrator to add new attributes to any element in the design catalogue or the drawing database. Once defined udas can be accessed in the same way as the standard attributes
9. Propcon module
This module is used to construct a Properties Database . The database contains data for use with stress analysis package and safety auditing of all parts of design.The data structure is designed to provide information suitable for any stress analysis package if required.
Propcon module in PDMS
Related Posts:
Hierarchy in PDMS: World, Site, Zone Hierarchy in PDMS (Plant Design Management System): World, Site, Zone…
Equipment Modeling Using PDMS- Primitives And Templates Previously I gave a PDMS overview in this post. Here…
3D Modelling/Environment for Plant Design 3D modelling/environment for Plant Design: In today’s design world, majority…
Stretch/Trim Functions in PDMS Equipment Modelling Stretch/Trim Functions in PDMS Equipment Modelling One of the important…
How to Change Hierarchy in PDMS 3D Modelling In many projects, there is 3D PDMS modelling procedure/work instruction…
*