New South Wales Trade Price List - BlueScope Steel South Wales Price List Trade Price List (Strictly...
Transcript of New South Wales Trade Price List - BlueScope Steel South Wales Price List Trade Price List (Strictly...
New South Wales Price List
Trade Price List(Strictly for Trade Use Only)
April 4, 2011
Selection Tables – Roofing & Walling
New South Wales/ACT
Roofing & Walling ProfilesBMT(mm)
Mass(kg/m2)
CB
Min.recom.
roofpitch(mm)
Screws/m2
Maximum recommended spacing ofsupports for normal conditions (mm)
Roofs Walls
Profile Product EndSpans
InternalSpans
Unstiff’dEaves
Overhang
StiffenedEaves
Overhang
EndSpans
InternalSpans
Custom Orb®0.420.48
4.44.9
5˚ 59001300
12001700
200250
300350
25002700
27002700
Custom Blue Orb® 0.60 6.0 5˚ 5 1600 1800 200 300 3000 3300
Trimdek®
0.420.48
4.44.9
2˚ 5.513001850
19002600
150200
300350
30003000
30003000
0.42 4.425
mm/m5.5
Home Improvement Application* Overhang
2700 500
Spandek®
0.420.48
4.75.4
3˚ 5.518002200
24003000
300400
600700
30003000
33003300
0.42 4.725
mm/m5.5
Home Improvement Application* Overhang
3000 700
Klip-Lok 700®HS0.420.48
4.75.4
2˚1˚
4.517502350
22002800
150200
450600
32003450
38503900
Klip-Lok 406®
0.420.480.60
5.05.77.0
2˚1˚1˚
5
12001800
>1800
13002100
>1800
200200300
600600900
––
––
Spans over 1800, please contact your local Lysaght office.
Integrity 820® 0.42 4.7 2˚ 4.5 Contact your representative. Available projects only.
Longline 305®
Tapered Longline0.700.70
9.8– 1˚
34.5
20002000
25002500
150150
450450
27002700
27002700
Flatdek®
0.42 6.3 2˚ 4 2600 3000 – – – –
0.42 6.325
mm/m4.0
Home Improvement Application* Overhang
4000 750
Walling Profiles BMT(mm)
Mass(kg/m2)
CB
Screws/m2
Maximum recommended spacing ofsupports for normal conditions (mm)
Profile Product Single Spans(mm)
End Spans(mm)
Internal Spans(mm)
Easyclad® 2PF300 0.42 4.6 6 – 1500 1500
Panelrib®0.350.42
3.33.9
55
11001200
12001200
12001200
Mini Orb®0.420.48
4.04.6
88
12001500
15001500
15001500
Multiclad®0.350.42
3.34.0
44
14001700
18001800
18001800
Trimwall® 0.35 3.7 5.5 2100 2900 3000
* Home improvement applications: spans are for single spans. Overhang is for stiffening by gutter
Orders and Sales enquiries
13 30 38
or download the latest information from our website;
www.lysaght.com
For more information or technical assistance you can call;
1800 641 417
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
3
Gen
eral
RRP
Quantity Calculator – Roofing & Walling Profiles
Number of sheets required for a Roof or Wall of ‘x’ width
Width of Roof or Wall (m)
ProductCover widthmm
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Custom Orb 762 4 6 7 8 10 11 12 14 15 16 18 19 20 21 23 24 25 27
Custom Blue Orb 762 4 6 7 8 10 11 12 14 15 16 18 19 20 21 23 24 25 27
Trimdek 762 4 6 7 8 10 11 12 14 15 16 18 19 20 21 23 24 25 27
Spandek 700 5 6 8 9 10 12 13 15 16 18 19 20 22 23 25 26 28 29
Klip-Lok 700 HS 700 5 6 8 9 10 12 13 15 16 18 19 20 22 23 25 26 28 29
Klip-Lok 406 406 8 10 13 15 18 20 23 25 28 30 33 35 37 40 42 45 47 50
Flatdek 250 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80
Integrity 820 820 4 5 7 8 9 10 11 13 14 15 16 18 19 20 21 22 24 25
Longline 305 305 10 14 17 20 23 27 30 33 37 40 43 46 50 53 56 60 63 66
Trimwall 762 4 6 7 8 10 11 12 14 15 16 18 19 20 21 23 24 25 27
Panelrib 850 4 5 6 8 9 10 11 12 13 15 16 17 18 19 20 22 23 24
Multiclad 840 4 5 6 8 9 10 11 12 14 15 16 17 18 20 21 22 23 24
Mini Orb 820 4 5 7 8 9 10 11 13 14 15 16 18 19 20 21 22 24 25
Easyclad 2PF 300 10 14 17 20 24 27 30 34 37 40 44 47 50 54 57 60 64 67
Roof or wall width covered by ‘x’ sheets (m)
Number of sheets
ProductCover widthmm
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Custom Orb 762 2.3 3.0 3.8 4.6 5.3 6.1 6.9 7.6 8.4 9.1 9.9 10.7 11.4 12.2 13.0 13.7 14.5 15.2
Custom Blue Orb 762 2.3 3.0 3.8 4.6 5.3 6.1 6.9 7.6 8.4 9.1 9.9 10.7 11.4 12.2 13.0 13.7 14.5 15.2
Trimdek 762 2.3 3.0 3.8 4.6 5.3 6.1 6.9 7.6 8.4 9.1 9.9 10.7 11.4 12.2 13.0 13.7 14.5 15.2
Spandek 700 2.1 2.8 3.5 4.2 4.9 5.6 6.3 7.0 7.7 8.4 9.1 9.8 10.5 11.2 11.9 12.6 13.3 14.0
Klip-Lok 700 HS 700 2.1 2.8 3.5 4.2 4.9 5.6 6.3 7.0 7.7 8.4 9.1 9.8 10.5 11.2 11.9 12.6 13.3 14.0
Klip-Lok 406 406 1.2 1.6 2.0 2.4 2.8 3.2 3.7 4.1 4.5 4.9 5.3 5.7 6.1 6.5 6.9 7.3 7.7 8.1
Flatdek 250 0.8 1.0 1.3 1.5 1.8 2.0 2.3 2.5 2.8 3.0 3.3 3.5 3.8 4.0 4.3 4.5 4.8 5.0
Integrity 820 820 2.5 3.3 4.1 4.9 5.7 6.6 7.4 8.2 9.0 9.8 10.7 11.5 12.3 13.1 13.9 14.8 15.6 16.4
Longline 305 305 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.1 3.4 3.7 4.0 4.3 4.6 4.9 5.2 5.5 5.8 6.1
Trimwall 762 2.3 3.0 3.8 4.6 5.3 6.1 6.9 7.6 8.4 9.1 9.9 10.7 11.4 12.2 13.0 13.7 14.5 15.2
Panelrib 850 2.6 3.4 4.3 5.1 6.0 6.8 7.7 8.5 9.4 10.2 11.1 11.9 12.8 13.6 14.5 15.3 16.2 17.0
Multiclad 840 2.5 3.4 4.2 5.0 5.9 6.7 7.6 8.4 9.2 10.1 10.9 11.8 12.6 13.4 14.3 15.1 16.0 16.8
Mini Orb 820 2.5 3.3 4.1 4.9 5.7 6.6 7.4 8.2 9.0 9.8 10.7 11.5 12.3 13.1 13.9 14.8 15.6 16.4
Easyclad 2PF 300 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 3.3 3.6 3.9 4.2 4.5 4.8 5.1 5.4 5.7 6.0
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
4
Gen
eral
RRP
Colour Availability – Roofing & Walling
Notes: 1. Selected roofing profiles can also be rolled with the colour underside. Please enquire at your local branch for availability.2. Other colours, finishes and gauges are subject to enquiry.3. Not all colours are stocked at every branch.
ProductCOLORBOND® steel – Standard Range
ZINCALUME® steel
Galvanised
Aq
uaplate 8 &
10 Corrug
ated
Bushland
Classic C
ream
Cottag
e Green
Deep
Ocean
Dune
Evening
Haze
Head
land
Ironstone
Jasper
Loft
Manor R
ed
Monum
ent
Pale Eucalyp
t
Paperb
ark
Sandb
ank
Shale Grey
Surfmist
Wild
erness
Wind
spray
Wood
land G
rey
Custom Orb .42 • • • • • • • • • • • • • • • • • • • • • •
Custom Orb .48 • • • • • • • • • • • • • • • • • • • • •
Custom Blue Orb .60 • • • • • • • • • • • • • • • • • • • • • • •
Multiclad .35 • • • • • • • • • • • • • • • • • • • •
Multiclad .42 • • • • • • • • • • • • • • • • • • • • •
Trimdek .42 • • • • • • • • • • • • • • • • • • • • • •
Trimdek .48 • • • • • • • • • • • • • • • • • • • • •
Trimwall .35 • • • • • • • • • • • • • • • • • • • •
Panelrib .35 • • • • • • • • • • • • • • • • • • • •
Panelrib .42 • • • • • • • • • • • • • • • • • • • • •
Panelrib .48
Mini Orb .42 • • • • • • • • • • • • • • • • • • • • •
Mini Orb .48
Spandek .42 • • • • • • • • • • • • • • • • • • • • •
Spandek .48 • • • • • • • • • • • • • • • • • • • • •
Klip-Lok 406 .48 • • • • • • • • • • •
Klip-Lok 700 .42 • • • • • • • • • • • • • • • • • • • • •
Klip-Lok 700 .48 • • • • • • • • • • • • • • • • • • • • •
Easyclad 2PF .42 • • • • • • • • • • •
Longline 305 • • • • •
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
5
Gen
eral
RRP
Colour Availability – Roofing & Walling
Notes: 1. Selected roofing profiles can also be rolled with the colour underside. Please enquire at your local branch for availability.2. Other colours, finishes and gauges are subject to enquiry.3. Not all colours are stocked at every branch.
Product COLORBOND® steel – Non-Standard Range
COLORBOND®
Coolmax®
Hi GlossSingle-Sided
COLORBOND®
steel Double-
Sided
Standard COLORBOND® steel
over/80% Hi Gloss
underside
COLORBOND® steelUltra
COLORBOND® steelMetallic
Whitehaven
Classic C
ream
Thredb
o White
Surfmist/Surfm
ist
Paperb
ark/Paperb
ark
Classic C
ream/C
lassic Cream
Surfmist/Thred
bo W
hite
Deep
Ocean
Dune
Loft
Surfmist
Wind
spray
Wood
land G
rey
Axis
Citi
Conservatory
Cortex
Facade
Skybrid
ge
Custom Orb .42 • • • • • • • • • • • • •
Custom Orb .48 • • • • • • • • • • • • •
Custom Blue Orb .60
Multiclad .35
Multiclad .42
Trimdek .42 • • • • • • • • • • • • •
Trimdek .48 • • • • • • • • • • • • •
Trimwall .35
Panelrib .35
Panelrib .42
Panelrib .48 • • • • • •
Mini Orb .42 • • • • • •
Mini Orb .48 • • • • • •
Spandek .42 • • • • • • • • • • • • •
Spandek .48 • • • • • • • • • • • • •
Klip-Lok 406 .48
Klip-Lok 700 .42 • • • • • • •
Klip-Lok 700 .48 • • • • • • • • • • • • •
Easyclad 2PF .42
Longline 305
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
6
Gen
eral
RRP
Colour Availability – Rainwater Goods
Notes: 1. Check with your local branch for stock availability.
ProductCOLORBOND® steel – Standard Range
ZINCALUME® steel
Galvanised
Bushland
Classic C
ream
Cottag
e Green
Deep
Ocean
Dune
Evening
Haze
Head
land
Ironstone
Jasper
Loft
Manor R
ed
Monum
ent
Pale Eucalyp
t
Paperb
ark
Sandb
ank
Shale Grey
Surfmist
Wild
erness
Wind
spray
Wood
land G
rey
Roll Top Ridge • • • • • • • • • • • • • • • • • • • • • •
Sheerline Gutter • • • • • • • • • • • • • • • • • • • • •
Sheerline Capping • • • • • • • • • • • • • • • • • • • • •
Quad Gutter Hi Front • • • • • • • • • • • • • • • • • • • • •
Quad Gutter Lo Front • • • • • • • • • • • • • • • • • • • • •
Trimline Gutter • • • • • • • • • • • • • • • • • • • • •
Half Round 150mm Gutter
• • • • • • • • • • • • • • • • • • • • •
Half Round Flatback 150mm Gutter
• • • • • • • • • • • • • • • • • • • • •
Novaline Fascia • • • • • • • • • • • • • • • • • • • • •
Novaline Fascia Cover • • • • • • • • • • • • • • • • • • • • •
Flashings .55 BMT • • • • • • • • • • • • • • • • • • • • • •
Downpipes • • • • • • • • • • • • • • • • • • • • •
Barge Gutter • • • • • • • • • • • • • • • • • • • •
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
7
Gen
eral
RRP
Colour Availability – Rainwater Goods
Colour Availability – Home Improvements
Notes: 1. Other colours may be available – subject to enquiry.2. Check with your local branch for stock availability.
Product COLORBOND® steel – Non-Standard Range
COLORBOND®
Coolmax®
80% Hi GlossSingle-Sided
COLORBOND® steelUltra
COLORBOND® steelMetallic
Whitehaven
Paperb
ark
Classic C
ream
Thredb
o White
Deep
Ocean
Dune
Loft
Surfmist
Wind
spray
Wood
land G
rey
Axis
Citi
Conservatory
Cortex
Facade
Skybrid
ge
Roll Top Ridge
Sheerline Gutter • • •
Sheerline Capping
Quad Gutter Hi Front
Quad Gutter Lo Front
Trimline Gutter
Half Round 150mm Gutter • • • • • •
Half Round Flatback 150mm Gutter
• • • • • •
Novaline Fascia
Novaline Fascia Cover
Flashings .55 BMT • • • • • • • • • • • • • • • •
Downpipes
Barge Gutter
Product 80% Hi GlossSingle-Sided
Standard COLORBOND® steel over 80% Hi Gloss underside
ZINCALUME®
Classic C
ream
Thredb
o White
Paperb
ark
Surfmist/Thred
bo W
hite
Classic C
ream/C
lassic Cream
Paperb
ark/Paperb
ark
Wood
land G
rey/Classic C
ream
Flatdek .42 • • • •
Firmlok • • • •
Patio Post • • • •
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
8
Gen
eral
RRP
Colour Availability – Fencing
Notes: 1. Check with your local branch for stock availability.
Product
ZINCALUME®
Galvanised
Bluestone
Dom
ain
Eclip
se
Estate
Everg
reen
Grey R
idg
e
Harvest
Hed
ge
Mead
ow
Red
Oak
Riversand
Summ
ershade
Teatree
Terrace
Willow
Fence Posts/Rails • • • • • • • • • • • • • • • •
Neetascreen Infills • • • • • • • • • • • • • •
Smartascreen Infills • • • • • • • • • • • • • •
Miniscreen Infills • • • •
Miniscreen Rails • • • • •
Lattice (Powder Coated) • • • • • • • • • • • • • • • •
Slats (Powder Coated) • • • • • • • • • • • • • • •
Pickets (Powder Coated) • • • • • • • • • • • • • • •
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
9
Gen
eral
RRP
NSW Production Schedule
Notes:
1. Delivery of Sydney produced products to country centres will be made by the first available transport.2. Production Schedules are subject to change without notice. Production shifts are subject to closure without notice.3. Check with your local branch for rolling day of specific colours.4. Large orders may be subject to extended lead time.
Product Rolling Day SYD NEW CAN DUB TAM COF BAT
Roofing & Walling
Custom Orb Daily • • • • • •
Custom Blue Orb Tues, Thurs •
Custom Blue Orb Curved Wed, Fri •
Trimdek Daily • • • • • •
Spandek Mon, Tues, Thurs •
Klip-Lok HS 700 Daily •
Klip-Lok 406 Mon, Wed, Fri •
Longline 305 Approx 10 working days from placement of order
•
Longline 305 Tapered Approx 10 working days from placement of order
•
Flatdek Daily •
Integrity 820 Subject to enquiry
Trimwall Daily •
Mini Orb .42 Wed, Fri •
Mini Orb .48 Subject to inquiry •
Multiclad Mon, Wed, Fri •
Panelrib Tues, Thurs •
Easyclad 2PF 300 Mon, Tues •
Rainwater Goods
Hi-Front Quad Gutter Daily • • • • • •
Lo-Front Quad Gutter Tues, Thurs •
Trimline Gutter Daily •
Sheerline Gutter Daily •
Sheerline Capping Daily •
Half Round 150mm Gutter Daily •
Half Round Flatback 150mm Gutter Daily •
Novaline Fascia Daily • • • • • •
Novaline Fascia Cover Daily • •
Roll Top Ridge Daily • • • • • •
Flashings Standard Daily • • • • • • •
Flashings Non-Standard Daily • • • • • • •
Structural Products
Bondek Daily •
Purlins Refer to Purlin Rolling
Schedule• •
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
10
Gen
eral
RRP
Sydney Production Schedule – Purlins
Newcastle Production Schedule – Purlins
Notes: 1. C10010 - Rolled in Newcastle. May be subject to longer lead time.
Profile Order day (by 3pm) Rolling Day Delivery Day ex Sydney
Supa C150 Friday Monday Wednesday
Supa Z150 Monday Tuesday Thursday
Z100 Tuesday Wednesday (fortnightly) Monday
C100 Tuesday Wednesday Monday
Supa C200 Wednesday Thursday Monday
Supa Z200 Thursday Friday Tuesday
Supa C250 Tuesday Wednesday Friday
Supa Z250 Tuesday Wednesday Friday
Supa C & Z 300 Subject to enquiry Subject to enquiry Subject to enquiry
Supa C & Z 350 Subject to enquiry Subject to enquiry Subject to enquiry
Profile Order day (by 12pm) Rolling Day Delivery Day ex Newcastle
C100 Wednesday Friday Monday
C150 Thursday Monday Tuesday
Friday Tuesday Wednesday
Monday Wednesday Thursday
Tuesday Thursday Friday
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
11
Gen
eral
RRP
Notes: • The above charge schedule is designed based on RTA regulations stipulated in RTA 480265D (4/00)
• NSW legislation for long length deliveries may change without notice and we reserve the right to apply additional charges.
• Deliveries to site are charged per number of vehicles• Large volume transport POA.
• Site to be accessible by delivery vehicle or additional charges will apply.
• If order is to be split into different dates due to customer requirements, additional charges may apply.
• Long load escorts – additional charges will apply.• Unusual &/or custom products may incur additional charges.
Delivery* & Packing Charges
*Additional charges may apply for deliveries outside Sydney Metropolitan standard delivery area.
Product length (mm) Delivery chargesCharges
GST EXC GST INC
0 – 14450 Store $25/order $27.50/order
0 – 14450 Site (local) $120 $132
14451 – 16600 Travel restrictions may apply between certain times, subject to delivery location and route. Escorts and Permits may be required.
$210 $231
(+ applicable escort permit & site inspection charges)
16601 – 19500 Travel restrictions may apply between certain times, subject to delivery location and route. Escorts and Permits may be required.
$270 $297
(+ applicable escort permit & site inspection charges)
19501 and over Travel restrictions may apply between certain times, subject to delivery location and route. Escorts and Permits may be required.
POA (+ applicable escort permit &
site inspection charges)
Additional Delivery Charges
Time Drops to site Specific time on site.Time to be negotiated at time of order placement.
$80 $88
(+ applicable delivery charge)
Time Drops to store Specific time at store address. Time to be negotiated at time of order placement.
$80 $88
(+ applicable delivery charge)
Demurrage For trailers left unloaded on site/per day or part thereof. $90 per hour $99 per hour
Unloading timesOne hour for part loads and three hours for full loads
(at both store and site) are included in standard pricing. Additional time will be charged at the stated fee.
$90 per hour $99 per hour
Waiting timeCut off for drivers waiting to unload at a customer site is 1 hour.
After time is exceeded, transport may leave the site and a re-delivery charge may apply.
$90 per hour $99 per hour
Re-Delivery Return to factory and re-delivered. Additional to standard delivery charge. $150 minimum $165 minimum
Late changes/cancellations Changes or cancellations to delivery within 24 hours of confirmed original delivery date. May also be subject to re-delivery charge. $120 per order $132 per order
Weekend Delivery Weekend surcharge plus applicable delivery charge. $400 minimum $440 minimum
Re-packing of Customer Goods $70 per hour $77 per hour
Storage of Finished Goods Charges apply three days after confirmed original delivery date. $90/order per day $99/order per day
Minimum Courier Charge Available by request at additional charge. $120 minimum $132 minimum
Site Inspection Charge Available by request at additional charge. $140 minimum $154 minimum
Escorts – Sydney Metropolitan Number of escorts required is determined by product length, time of delivery, delivery location and delivery route.
$150 minimum each
$165 minimum each
Escorts – outside Sydney Metro
Number of escorts required is determined by product length, time of delivery, delivery location and delivery route. POA
Packing ChargesFor descriptions on packing types, see following pages. Standard packing incurs no additional charge.
Packing Sheets $6.00/lineal metre GST EXC (Top AND Bottom), $5.00/lineal metre GST EXC (Top OR Bottom)
Shed Consolidation Minimum $150 (GST EXC) per shed
Country Packing POA
Crate Packing POA
Sea Wrap POA
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
12
Gen
eral
RRP
Miscellaneous Charges
DescriptionRemarks
ChargesGST EXC GST INC
Minimum Order ValueFor all orders with a product
net value of $100 or lessAdditional 10% of the invoice
value will be charged.
Product Returns25% of total product value. Only stock items in prime condition inspected by a Lysaght
representative are returnable.
25% of the invoice value plus standard delivery charge for pick-up of goods.
Cutback Charges Cutting charges for short lengths. $3.95 per cut $4.35 per cut
Service Charge 1% of the outstanding amount
after 50 days.
Roofing & Walling small order charge (under 35m)
Maximum 6 day lead time charged if shorter lead time requested.
$80 $88
Rainwater Goods Stillages & Steel Sea Packs
Fully refundable on return to BlueScope Lysaght. $150 each $165 each
Tapered Flashings Extra charge for tapered custom flashings $ 2.64/m $ 2.90/m
Pallet Charge For flat sheet
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
13
Gen
eral
RRP
Delivery Terms & ConditionsSafety At BlueScope Lysaght we believe that the safety of our customers and employees is of the utmost importance. We expect our staff not only to comply with relevant legislation, but also to make decisions which ensure a safe environment. No production or deliveries that involve an unsafe or inappropriate practice will occur.
Unattended sites If a site is unattended the driver will try and unload goods as close to the site as possible. BlueScope Lysaght will not accept claims for damage to product when unloading or claims for shortage, loss or damage of part or all of the delivery. No responsibility will be taken for relocating goods.The Proof of Delivery docket will be signed by the driver and a photograph taken of the unloaded product.
Demurrage Trailers may be left loaded on site if prior approval to do so has been agreed with transport. This will incur an additional fee of $90 (exc GST) per hour or part thereof.
Gluts/BearersTimber gluts will be delivered with multiple packs of material. These gluts remain the property of BlueScope Lysaght and may be collected at any time. For safety and to assist with collection please set aside where easily accessible.
Regional Deliveries Area borders are defined in the map within this book for metropolitan and country delivery zones. Any delivery outside of these zones are subject to price on application for delivery.
Factors affecting deliveries Public Holidays: May cause alterations to usual delivery arrangements. Please contact your local sales office for details.
Local Regulations: Some local councils have specific regulations on public streets (eg. Parking on the street, additional time constraints for heavy vehicles).
Long Lengths: Up to 14600mm – May travel unrestricted on public roads and highways at any time.
From 14601mm to 18000mm – May travel between – 1am and 5.00am, and 10am – 3.00pm.
Long lengths may need to be escorted by private escort or police and must reach their destination at times specified by local authorities. Long loads may require a site inspection prior to delivery.
Site accessibility/redeliveryIt is the customer’s responsibility to ensure that the site is accessible, if unsure please enquire. Where goods cannot be unloaded a redelivery charge will apply.
Drivers will enter sites only if they deem it safe to do so.
Delivery change/cancellationIf there is a change to the delivery date, time or address, a minimum of 24 hours notice is required and an additional charge will be levied.
Time drops Specific time drops are available at an additional charge. BlueScope Lysaght endeavours to meet all site times, within half an hour either side of the booked time. Circumstances beyond our control can incur delays, therefore we cannot accept responsibility for late delivery.Check with your local Lysaght branch for available time slots.
Unloading/waiting times The following items are allocated for deliveries:
• Partial Loads: 1 hour • Full truck loads: 3 hours • Waiting time: 1 hour
Note: if above times are exceeded, customer will be charged at a rate of $90 (exc GST) per hour or part thereof.
Unloading at the site is the responsibility of the customer except where BlueScope Lysaght offers an alternative service. Loads over 5 tonne are subject to enquiry for hi-ab unloading. The maximum length for use of hi-ab is 12 metres.
Drivers will not crane material where it is unsafe to do so (eg. through windows, near powerlines or onto structures, over fences.
Customer pick-ups Standard collection days are Monday to Friday. Refer to your local Lysaght branch for collection times.
Drivers and their vehicles must comply with site safety policies. Refer to transport safety guidelines on page 14.
Country pick ups By special arrangement with nominated carrier and BlueScope Lysaght site, please contact Despatch 24 hours prior to collection time.
Courier charges Courier services will incur a minimum surcharge charge of $120 (exc GST).
Packing Please see page 23 and 24 for examples of standard and additional packing options. All additional packing incurs additional charges.Please specify packing option when ordering or standard packing will be assumed.
Care, storage & handling of product on site Please refer to product literature with regard to the care, storage and handling of the product on site.
• Stack goods neatly clear of ground. • Protect with waterproof covers. • If product becomes wet for extended periods then separate,
wipe and stack to thoroughly dry.• Use spreader bars for handling long lengths. • Don’t drag product over each other or other building
materials or tools.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
14
Gen
eral
RRP
Transport Safety Guideline – Customer Pickups
The drivers vision must not be obstructed. Projections/overhangs that are dangerous are not acceptable, even if they are within the limits below.
For daytime travel, a minimum 300 mm square bright red flag is required on any overhang that cannot be easily seen. This is mandatory for overhangs beyond 1200mm past the end of a vehicle (i.e. for trucks).
Overhang Requirements
The overhang limits on this page are based on maximum limits for product protection and/or the strictest state or territory regulations. Wide loads should not be inclined (due to wind loadings).
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
15
Gen
eral
RRP
Arndell Park Transport Schedule
Sydney Delivery Area
Notes: Deliveries from NSW country areas – allow 1 day to unload in Sydney before delivery date to customer.
Area Run Code Description Mon Tues Wed Thurs Fri
Sydney Region
METRO Sydney Metropolitan area • • • • •
MTS Blue Mountains • •
SHL Sth Highlands (Nth of Marulan) • • •
WOL Wollongong • • • • •
South CoastBAN Nowra (via Batemans Bay Nth) • • • • •
BAS Coastal (Batemans Bay to Eden) • • • • •
ACT/NSW Country
CAN Canberra • • •
CAR Cardiff • • • • •
DUB Dubbo • •
TAM Tamworth (via Cardiff) • • •
Interstate
QLD Queensland •
GIL Gillman (SA) •
LYN Lyndhurst (Vic) •
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
16
Gen
eral
RRP
Emu Plains Transport Schedule
Sydney Delivery Area
Notes: Deliveries from NSW country areas – allow 1 day to unload in Sydney before delivery date to customer.
Area Run Code Description Mon Tues Wed Thurs Fri
Sydney Region
METRO Sydney Metropolitan area • • • • •
MTS Blue Mountains • •
SHL Sth Highlands (Nth of Marulan) • • •
WOL Wollongong • • • • •
South CoastBAN Nowra (via Batemans Bay Nth) • • • • •
BAS Coastal (Batemans Bay to Eden) • • • • •
ACT/NSW Country
CAN Canberra • • • • •
CAR Cardiff • • • •
DUB Dubbo • •
TAM Tamworth (via Cardiff) • • •
Interstate
QLD Queensland •
GIL Gillman (SA) •
LYN Lyndhurst (Vic) •
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
17
Gen
eral
RRP
Canberra Transport Route Schedule
North West South
Area Route Mon Tues Wed Thurs Fri
North Braidwood, Bungendore, Queanbeyan •
Sydney Backload Queanbeyan, Goulburn, Sydney • • •
WestHarden, Young, Boorowra, Gunning, Yass,
Murrumbateman, Queanbeyan• •
SouthCooma, Jindabyne, Queanbeyan
(Wednesday only in winter months)• •
Local Local Canberra • • • • •
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
18
Gen
eral
RRP
Newcastle Transport Route Schedule
Newcastle Mid-North Coast Central Coast
Port Stephens Coalfields
Area Route Mon Tues Wed Thurs Fri
NewcastleSwansea, Toronto, Cessnock, Branxton
Tocal, Maitland, Raymond Terrace, Wallsend, City suburbs
• • • • •
Central CoastKillcare, Woy Woy, Mangrove Mountain, Wyee,
Morisset, Gosford, The Entrance, Lake Munmorah
• • • • •
Port StephensAnna Bay, Nelson Bay, Dungog,
Paterson, Seaham, Medowie• •
Mid-North CoastTea Gardens, Forster, Taree,
Coopernook, Wingham• • •
Coalfields Singleton, Muswellbrook, Broke, Denman • •
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
19
Gen
eral
RRP
Coffs Harbour Transport Route Schedule
Local North South
South West
Notes: Lengths greater than 12000mm may be subject to additional freight charges. Please contact your local branch to obtain a freight quotation.
Area Route Mon Tues Wed Thurs Fri
LocalSawtell, Boambee,
Sapphire, Coffs Harbour• • • • •
NorthIluka, Yamba, Grafton, Maclean, Coramba, Nana Glen, Glenreagh, Northern Beaches
• • • • •
SouthKew, Port Macquarie, Kempsey, Wauchope,
South West Rocks, Macksville, Nambucca• • • • •
South West
Bellingen, Gleniffer Dorrigo • •
Dorrigo •
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
20
Gen
eral
RRP
Dubbo Transport Route Schedule
Dubbo Transport Routes
Area Route Mon Tues Wed Thurs Fri
Local Dubbo • • • • •
West Narromine •
NorthGilgandra, Gular, Coonamble,
Gulgong, Dunedoo •
EastMudgee • •
Rylestone •
South East
Lithgow • •
Bathurst • • • • •
Oberon (Bathurst Run) •
Molong • • • • •
Orange • • • • •
South
Blayney •
Cowra •
Canowindra •
South WestPeak Hill, Parkes, Forbes • •
Bogan Gate, Condobolin (forwarded to Lake Cargellico)
•
EastArndell Park • •
Emu Plains • •
Notes: Lengths greater than 13200mm subject to enquiry and may be subject to additional freight charges. Please contact your local branch to obtain a freight quotation.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
21
Gen
eral
RRP
Tamworth Transport Route Schedule
Local 2 South West
North West North 1 North 2
Area Route Mon Tues Wed Thurs Fri
Local 1 Tamworth • • • • •
Local 2Moonbi, Kootingal, Piallamore, Moore Creek,
Attunga, Duri• •
SouthWerris Creek, Quirindi, Murrundi Scone,
Aberdeen•
West Gunnedah, Narrabri, Moree •
North West Manilla, Barraba, Bingara, Warialda, Inverell •
North 1 Armidale, Walcha, Uralla, Bendemeer •
North 2 Glen Innes, Guyra •
Notes: Lengths greater than 12000mm may be subject to additional freight charges. Please contact your local branch to obtain a freight quotation.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
22
Gen
eral
RRP
Site Accessibility FormContact Details Customer Name: Telephone No:Site Contact Name: Site Contact No:
Site Details Company Name: Contact Name:Telephone No: Map Ref:Site Address: Nearest Cross Street/Landmark:
Site questions 1. Site type: a. House b. Building Site c. Rural Area2. What vehicle type is suitable for the site a. Rigid truck (12 metre truck, 9 metre max product length) b. Semi trailer (16 metres minimum length, 2.6 metres wide)3. Road surface: a. Bitumen b. Gravel surface c. Unsurfaced (grass/dirt)Additional comments:4. Access restrictions: a. Clearways g. Steep driveways b. Peak hour traffic h. Height restrictions < 4 metres c. CBD i. No through road d. Wet weather j. One way street e. Local council weight limits k. Narrow road/driveway < 4 metres f. Restricted turning circle l. Overhead power lines
Map to site and site layout
Unloading questions 1. Is a vehicle with a crane required (max. length ‘12’ metres, over ‘5’ tonne by negotiation only) Yes No2. Will there be a crane on site: Yes No What time? (Please note: allow 30 minutes either side of booked time)3. Is a site time required? *Site times incur additional charges. (Refer to Delivery Charges)
4. Any other special requirements (eg. Call before delivery to unlock gates, security)
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
23
Gen
eral
RRP
Standard Packing
ZINCALUME® steel & galvanised sheeting • No protective covering
Klip-Lok®, in COLORBOND® steel & ZINCALUME® steel• Minimum top sheet down• Maximum half sheets up, half sheets down
Rainwater goods• Strapped bundles• Product interleaved with carpet or cardboard
Flatdek®
• Cardboard top and bottom• Stretch wrapped
Fencing posts & rails – full packs • Cardboard between rows (vertical also for rails)• Cardboard top and bottom and stretch wrapped
Fencing infill sheets• Packing Sheets top and bottom
Fencing rails, in COLORBOND® steel & ZINCALUME® steel• Bundle stretch wrapped• Product interleaved with cardboard
COLORBOND® steel sheeting• Protection on top sheet (cardboard, plastic wrap or top
sheet flipped.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
24
Gen
eral
RRP
Additional Packing Options (subject to additional charges)Not available at all sites, please check with customer service.
COLORBOND® steel & ZINCALUME® steel sheeting• Packing sheets top and bottom• Plastic laid between packing sheet and pack
Rainwater goods • Bundled in a steel or cardboard envelope• And/or plastic wrapped
Klip-Lok® 700• Packing sheets top and bottom• Plastic laid between packing sheet and pack
Sea packRainwater goods and stores items• Crate fully enclosed in steel or cardboard
Sea wrap• Plastic wrapped and sealed around pack• Packing sheets top and bottom
Shed consolidation• Complete shed pack, shrink wrapped
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
25
Gen
eral
RRP
NSW Purlins – Detail Sheet & Or der For m
Customer
Delivery Addr es s
Sheets.......................of.....................
Customer Or der Number:
Date Requir ed
Date Or der ed
Detailers re fer ence Detailers r efer ence
Please show hole patter n r equir ed and pr ogr essive location fr om left to right.
Br oad flange
End view fr om right hand side.
Flange hol e
W eb hol e
Gau
ge
G
O/A length Qty
Qty
As drawn. Mk No.
Opposite hand. Mk No.
Pr oduct Code:
Other special details :
35
35
All dimensions to be in mm.
Detailers r efer ence Detailers r efer ence
Please show hole patter n r equir ed and pr ogr essive location fr om left to right.
Br oad flange
End view fr om right hand side.
Flange hol e
W eb hol e
Gau
ge
G
O/A length Qty
Qty
As drawn. Mk No.
Opposite hand. Mk No.
Pr oduct Code:
Other special details :
35
35
All dimensions to be in mm.
Forms available from BlueScope Lysaght
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
26
Gen
eral
RRP
Forms available from BlueScope Lysaght
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
27
Gen
eral
RRP
Forms available from BlueScope Lysaght
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 29
Ro
ofi
ng
RRP
Minimum recommendedroof pitch = 5˚ (1 in 12)
Finish BMT mm$/m2
GST EXC GST INC
ZINCALUME® steel 0.42 28.78 31.66
Galvanised Z450 0.42 37.62 41.38
COLORBOND® steel 0.42 31.29 34.42
COLORBOND® steel Perforated, Corstrip – Surfmist only 0.42 55.29 60.82
COLORBOND® steel Hi-Gloss 80% 0.42 38.28 42.11
COLORBOND® steel Double Sided 0.42 43.25 47.58
COLORBOND® steel Double Sided Hi Gloss 0.42 41.27 45.40
COLORBOND® steel Coolmax® 0.42 37.33 41.06
COLORBOND® steel Ultra 0.42 61.21 67.33
ZINCALUME® steel 0.48 36.92 40.61
COLORBOND® steel 0.48 39.71 43.68
COLORBOND® steel Ultra 0.48 65.27 71.80
COLORBOND® steel Metallic 0.48 71.18 78.30
COLORBOND® steel Coolmax® 0.48 47.36 52.10
Application TypeUnpainted
$/1000Unpainted
$/100Painted$/1000
Painted$/100
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
Steel battens up to1.0mm BMT
Roof Zip R650 364.88 401.37 43.04 47.34 446.57 491.23 51.19 56.31
Steel Purlins 1.2mmto 1.9mm BMT
Auto Teks AT5539 345.87 380.46 N/A N/A 419.47 461.42 N/A N/A
Timber – Softwood Roof Zip R650 364.88 401.37 43.04 47.34 446.57 491.23 51.19 56.31
Timber – Hardwood TH1250 Type 17 HG Hex Head
291.80 320.98 35.73 39.30 373.50 410.85 43.90 48.29
Fasteners – Custom Orb
To convert price to lineal metres multiply by 0.762
Custom Orb
Maximum length* = 27000mm, Minimum rollformed length* = 1000mm Notes: 1. Minimum cut back is 305mm.2. Cutting charges apply to lengths under 1000mm and may be subject to a longer lead time (refer page 12).3. Cut back not available where colour underside or double-sided colour is requested.4. Contact your local branch for price and availability of colours not shown as available on page 4 and 5 of this price list.5. Tolerance on sheet lengths +0-10mm, width +4 - 4mm.6. Packing sheets – $6.00/lm GST EXC (Top and Bottom), $5.00/lm GST EXC (Top or Bottom).7. *Variations to minimum and maximum lengths may apply at your local branch.
Notes: 1. 5 fasteners per m2. (Estimate for non-cyclonic area)
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 30
Ro
ofi
ng
RRP
ProductZINCALUME® steel
$/lmCOLORBOND® steel
$/lmGST EXC GST INC GST EXC GST INC
Ridge Capping 29.86 32.85 30.47 33.52
Roll Top Ridge Capping 22.64 24.90 23.10 25.41
Tile Flashing 29.86 32.85 30.47 33.52
Apron Flashing 21.73 23.90 22.17 24.39
Valley Gutter 29.86 32.85 30.47 33.52
Barge Capping 22.90 25.19 23.37 25.71
Barge Roll Capping (Gable roll capping)
22.29 24.52 28.37 31.21
Barge Roll 14.15 15.57 17.41 19.15
$/ea $/ea
GST EXC GST INC GST EXC GST INC
Spear Point 50.32 55.35 50.66 55.73
Standard Flashings – Custom Orb
Maximum length* = 8000mm, Minimum length* = 1000mm (Rolltop maximum length* = 9000mm, Minimum length* = 800mm) Notes: 1. Refer to page 72 for the complete range of standard flashings. 2. For all other flashings that vary in dimensions from the standard range, please refer to section on Custom Flashings.3. *Variations to minimum and maximum lengths may apply at your local branch.4. Roll Top Ridge Capping may be available in stock lengths in selected colours (check with your local branch for availability).
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 31
Ro
ofi
ng
RRP
Product Length$/ea
GST EXC GST INC
Custom Orb 915mm 6.27 6.90
Translucent Sheeting – Custom Orb (Fibreglass)
Roof Infill Strips – Custom Orb
Polycarbonate Sheeting – Custom Orb
Product Grams/m2 $/lmGST EXC GST INC
Fibreglass1800 (walling only) 55.43 60.97
2400 59.99 65.99
Maximum length = 12200mm, Minimum length = 900mm Notes: 1. An extra charge will apply to lengths over 11000mm.2. Available in Clear and Opal. 3 . 32mm Weatherlok Washer required for all translucent sheeting.4. Please refer to page 81 for other products in the Translucent Sheeting range.
DescriptionPolycarbonate $/lm Laserlite 2000+ $/lm
GST EXC GST INC GST EXC GST INC
Custom Orb 59.89 65.88 77.99 85.79
Notes: 1. Polycarbonate Lengths: 1800, 2400, 3000, 3600 and 4200mm. Colours: Clear, Bronze, and Grey.2. Laserlite 2000+ Lengths: 1800, 2400, 3000, 3600, 4200, 4800, 5400, 6000, 7200 and 9000mm. Colours: Bronze Tint, Cream, Clear, Grey Tint, and Opal.
Translucent Sheeting Accessories
Product Width (mm) Length$/roll $/1000
GST EXC GST INC GST EXC GST INC
Roofing Wire (2 x 300 x 150mm)
1800mm 50m 280.77 308.85 N/A N/A
Lapseal
50mm x 6mm 11.7m 75.91 83.50 N/A N/A
75mm x 6mm 11.7m 104.23 114.65 N/A N/A
100mm x 6mm 11.7m 133.54 146.89 N/A N/A
Weatherlok Washer (Fibreglass only)
32mm (Dia) N/A N/A 439.03 482.93
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 32
Ro
ofi
ng
RRP
Finish BMT mm$/m2
GST EXC GST INC
Galvanised (8 corrugations) 0.60 79.31 87.24
Galvanised (10 corrugations) 0.60 81.56 89.72
Minimum recommendedroof pitch = 5˚ (1 in 12)
Finish BMT mm$/m2
GST EXC GST INC
ZINCALUME® steel (10.5 corrugations) 0.60 46.80 51.48
Galvanised Z600 (10.5 corrugations) 0.60 57.28 63.01
COLORBOND® steel (10.5 corrugations) 0.60 47.78 52.56
COLORBOND® steel Ultra 0.60 POA POA
To convert p rice to lineal metres multiply by 0.762
Custom Blue Orb – (Suitable for curving)
Custom Blue Orb AQUAPLATE® steel – (For Tank making only)
Maximum length = 25000mm, Minimum Rollformed length = 1000mm Notes: 1. Minimum cut back is 305mm.2. Cutting charges apply to lengths under 1000mm and may be subject to a longer lead time (refer page 12)3. Cut back not available where colour underside or double-sided colour is requested.4. Longer lengths than listed may be available on application and should be confirmed by the designer.5. Contact your local branch for price and availability of colours not shown as available on page 4 and 5 of this price list.6. Tolerance on sheet lengths +10 -10mm, width +4 -4mm7. For Custom Blue Orb accessories refer to Custom Orb accessories on pages 29-31.8. Please specify when ordering if Custom Blue Orb is required to end lap to Custom Orb.9. Packing sheets – $6.00/lm GST EXC (Top and Bottom), $5.00/lm GST EXC (Top or Bottom).
Curving and Bullnosing of Custom Blue Orb
Product$ per curve
GST EXC GST INC
Sheet lengths over 8m or under 1m radius 20.85 22.94
Sheet lengths under 8m or over 1m radius 26.10 28.71
Notes: 1. Curved sheets longer than 8000mm, or curved heights exceeding 1000mm are subject to enquiry.2. Additional freight charges may apply for curved product.3. For ease of ordering, we recommend the use of our Curving Order Form.4. Onsite curving may be available on request. An additional charge applies for this service.
Notes: 1. Check with your local branch for price and availability of fibreglass flashings.
ProductZINCALUME® steel $/lm COLORBOND® steel $/lm
GST EXC GST INC GST EXC GST INC
Curved Metal Apron Single Seam POA POA POA POA
Curved Metal Apron Double Seam POA POA POA POA
Curved Metal Barge Single Seam POA POA POA POA
Curved Metal Barge Double Seam POA POA POA POA
Curved Flashings – for Curved Custom Blue Orb (Metal)
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 33
Ro
ofi
ng
RRP
Number of sheets required Sheet length
Colour or finish
Colour Topside or
Colour Underside
Direction of laying (see FRONT VIEW in right-hand column)
Left to right
Right to left
Do the sheets side-lap with previously curved order?
Yes If yes, template required
No
Does the bullnosed sheet end-lap onto a straight sheet?
Yes
No
Have you supplied a template?
Yes
No
Is the template to be returned?
Yes
No
Dimensions:
Straight outside section (SR)
mm
Straight Vertical Lead in Section (SV)
mm (110mm min)
Radius (R)
mm (300mm min.)
Roof Pitch (P)
degrees(If using 150mm radius, minimum angle is 70˚)
Awning overall width (A)
mm
Height less vertical lead in (H)
mm
Details required for Bullnosing Custom Blue Orb
Notes: 1. Curved sheets longer than 8000mm, or curved heights exceeding 1000mm are subject to enquiry.2. Additional freight charges may apply for curved product.3. Onsite curving may be available on request. An additional charge applies for this service.
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 34
Ro
ofi
ng
RRP
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 35
Ro
ofi
ng
RRP
(Bottom profile shown)
Product Length$/ea
GST EXC GST INC
Trimdek top 915mm 6.27 6.90
Trimdek bottom 915mm 6.27 6.90
Roof Infill Strips – Trimdek
To convert price to lineal metres multiply by 0.762
Minimumrecommended
roof pitch = 2˚ (1 in 30)
Finish BMT mm$m2
GST EXC GST INC
ZINCALUME® steel 0.42 28.78 31.66
Galvanised Z450 0.42 37.62 41.38
COLORBOND® steel 0.42 31.29 34.42
COLORBOND® steel Hi Gloss 80% 0.42 38.28 42.11
COLORBOND® steel Ultra 0.42 61.21 67.33
COLORBOND® steel Double Sided Hi Gloss 0.42 41.27 45.40
COLORBOND® steel Double Sided 0.42 43.25 47.58
COLORBOND® steel Coolmax® 0.42 37.33 41.06
ZINCALUME® steel 0.48 36.92 40.61
COLORBOND® steel 0.48 39.71 43.68
COLORBOND® steel Ultra 0.48 65.27 71.80
COLORBOND® steel Metallic 0.48 71.18 78.30
COLORBOND® steel Coolmax® 0.48 47.36 52.10
Trimdek
Maximum length* 27300mm, Minimum Rollformed length* = 1000mm Notes: 1. Minimum cut back is 305mm.2. Cutting charges apply to lengths under 1000mm and may be subject to a longer lead time (refer page 12)3. Cut back not available where colour underside or double-sided colour is requested.4. Longer lengths than listed may be available on application and should be confirmed by the designer.5. Contact your local branch for price and availability of colours not shown as available on page 4 and 5 of this price list.6. Tolerance on sheet lengths +0-15mm, width +4 -4mm7. Packing sheets – $6.00/lm GST EXC (Top and Bottom), $5.00/lm GST EXC (Top or Bottom).8. *Variations to minimum and maximum lengths may apply at your local branch.
Application TypeUnpainted
$/1000Unpainted
$/100Painted $/1000
Painted $/100
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
Steel battens up to 1.0mm BMT
Roof Zip R650 364.88 401.37 43.04 47.34 446.57 491.23 51.19 56.31
Steel purlins 1.2mm up to 1.9mm BMT
Auto Teks AT5550
346.64 381.30 41.24 45.36 428.32 471.15 49.41 54.35
Timber – Softwood Roof Zip R665 428.88 471.77 49.69 54.66 514.65 566.12 58.05 63.86
Timber – Hardwood TH1250 Type 17 HG Hex Head
291.80 320.98 35.73 39.30 373.50 410.85 43.90 48.29
Fasteners – Trimdek
Notes: 1. 5.5 fasteners per m2. (Estimate for non-cyclonic area)
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 36
Ro
ofi
ng
RRP
Description Laserlite 2000+ $/lmGST EXC GST INC
Trimdek 77.99 85.79
Product Width (mm) Length$/roll $/1000
GST EXC GST INC GST EXC GST INC
Roofing Wire
(2 x 300 x 150mm)1800mm 50m 280.77 308.85 N/A N/A
Lapseal
50mm x 6mm 11.7m 75.91 83.50 N/A N/A
75mm x 6mm 11.7m 104.23 114.65 N/A N/A
100mm x 6mm 11.7m 133.54 146.89 N/A N/A
Weatherlok Washer (Fibreglass only)
32mm (Dia) N/A N/A 439.03 482.93
ProductZINCALUME® steel $/lm COLORBOND® steel $/lm
GST EXC GST INC GST EXC GST INC
Ridge Capping 29.86 32.85 30.47 33.52
Tile Flashing 29.86 32.85 30.47 33.52
Apron Flashing 21.73 23.90 22.17 24.39
30 Barge Capping 22.90 25.19 23.37 25.71
Valley Gutter 29.86 32.85 30.47 33.52
Standard Flashings – Trimdek
Translucent Sheeting – Trimdek
Product Grams/m2 $/lmGST EXC GST INC
Fibreglass
1800 (walling only) 55.43 60.97
2400 59.99 65.99
3050 84.51 92.96
Maximum length = 12200mm, Minimum length = 900mm Notes: 1. An extra charge will apply to lengths over 11000mm. 2. Available in Clear and Opal. 3 . 32mm Weatherlok Washer required for all
translucent sheeting.
4. Please refer to page 81 for other products in the
Translucent Sheeting range.
Maximum length 8000mm, Minimum length = 1000mm Notes: 1. Refer to page 72 for the complete range of standard flashings.
2. For all other flashings that may vary in dimensions from the standard range, please refer to section on Custom Flashings.
Translucent Sheeting Accessories
Polycarbonate Sheeting – Trimdek
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 37
Ro
ofi
ng
RRP
DescriptionLaserlite 2000+ $/lm
GST EXC GST INC
Greca 77.99 85.79
Minimum
recommendedroof pitch
= 3˚ (1 in 20)
Finish BMT mm$m2
GST EXC GST INC
ZINCALUME® steel 0.42 33.95 37.35
COLORBOND® steel 0.42 36.59 40.25
COLORBOND® steel Hi Gloss 80% 0.42 44.26 48.69
COLORBOND® steel Ultra 0.42 68.18 75.00
COLORBOND® steel Double Sided Hi Gloss 0.42 47.24 51.96
COLORBOND® steel Double Sided 0.42 49.51 54.46
COLORBOND® steel Coolmax® 0.42 43.63 47.99
ZINCALUME® steel 0.48 40.88 44.97
COLORBOND® steel 0.48 41.70 45.87
COLORBOND® steel Ultra 0.48 74.16 81.58
COLORBOND® steel Metallic 0.48 76.32 83.95
COLORBOND® steel Coolmax® 0.48 49.73 54.70
To convert price to lineal metres multiply by 0.700
Spandek
Maximum length = 27900mm, Minimum Rollformed length = 1000mm Notes: 1. Minimum cut back is 305mm.2. Cutting charges apply to lengths under 1000mm and may be subject to a longer lead time (refer page 12)3. Cut back not available where colour underside or double-sided colour is requested.4. Longer lengths than listed may be available on application and should be confirmed by the designer.5. Contact your local branch for price and availability of colours not shown as available on page 4 and 5 of this price list.6. Tolerance on sheet lengths +0-15mm width, +4 -4mm7. Packing sheets – $6.00/lm GST EXC (Top and Bottom), $5.00/lm GST EXC (Top or Bottom).
Fasteners – Spandek
Polycarbonate Sheeting – Spandek
Notes: 1. Laserlite 2000+ Lengths: 1800, 2400, 3000, 3600, 4200, 4800, 5400, 6000, 7200 and 9000mm. Colours: Bronze Tint,
Cream, Clear, Grey Tint and Opal.2. Not suitable for lapping with Spandek.
Notes: 1. 5.5 fasteners per m2 (estimate for non-cyclonic area)
Application TypeUnpainted
$/1000Unpainted
$/100Painted $/1000
Painted $/100
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
Steel battens up to 1.0mm BMT
Roof Zip R650 364.88 401.37 43.04 47.34 446.57 491.23 51.19 56.31
Steel purlins 1.2mm up to 1.9mm BMT
Auto Teks AT5550
346.64 381.30 41.24 45.36 428.32 471.15 49.41 54.35
Timber – Softwood Roof Zip R665 428.88 471.77 49.69 54.66 514.65 566.12 58.05 63.86
Timber – Hardwood TH1250 Type 17 HG Hex Head
291.80 320.98 35.73 39.30 373.50 410.85 43.90 48.29
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 38
Ro
ofi
ng
RRP
Product Grams/m2 $/lm
GST EXC GST INC
Fibreglass2400 76.41 84.05
3050 85.33 93.86
Roof Infill Strips – Spandek
Translucent Sheeting – Spandek (Fibreglass)
Standard Flashings – Spandek
Maximum length = 12200mm, Minimum length = 900mm Notes: 1. An extra charge will apply to lengths over 11000mm. 2. Available in Clear and Opal. 3 . 32mm Weatherlok Washer required for all
translucent sheeting.
4. Please refer to page 81 for other products in theTranslucent Sheeting range.
Maximum length 8000mm, Minimum length = 1000mm Notes: 1. Refer to page 72 for the complete range of standard flashings.
2. For all other flashings that may vary in dimensions from the standard range, please refer to section on Custom Flashings.
Translucent Sheeting Accessories
ProductZINCALUME® steel $/lm COLORBOND® steel $/lm
GST EXC GST INC GST EXC GST INC
Ridge Capping 29.86 32.85 30.47 33.52
Tile Flashing 29.86 32.85 30.47 33.52
Apron Flashing 21.73 23.90 22.17 24.39
30 Barge Capping 22.90 25.19 23.37 25.71
Valley Gutter 29.86 32.85 30.47 33.52
Product Width (mm) Length$/roll $/1000
GST EXC GST INC GST EXC GST INC
Roofing Wire (2 x 300 x 150mm)
1800mm 50m 280.77 308.85 N/A N/A
Lapseal
50mm x 6mm 11.7m 75.91 83.50 N/A N/A
75mm x 6mm 11.7m 104.23 114.65 N/A N/A
100mm x 6mm 11.7m 133.54 146.89 N/A N/A
Weatherlok Washer (Fibreglass only) 32mm (Dia) N/A N/A 439.03 482.93
Product Length$/ea
GST EXC GST INC
Spandek top 745mm 6.48 7.13
Spandek bottom 745mm 6.48 7.13
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 39
Ro
ofi
ng
RRP
Application TypeUnpainted $/1000 Unpainted $/100GST EXC GST INC GST EXC GST INC
Steel battens up to 1.0mm BMT
RZ625N Roof Zip POA POA POA POA
Steel purlins 1.2mm BMT to 1.9mm BMT
SH1220N Metal Hex Head
131.30 per 500
144.43 per 500
32.79 36.07
Timber Softwood BZ5540N Batten Zip 239.87 263.86 30.86 33.95
Timber-Hardwood BZ5540N Batten Zip 239.87 263.86 30.86 33.95
Minimumrecommended
roof pitch 0.42 = 2˚ (1 in 30)0.48 = 1˚ (1 in 50)
Finish BMT mm$m2
GST EXC GST INC
ZINCALUME® steel 0.42 42.45 46.70
COLORBOND® steel 0.42 47.45 52.20
COLORBOND® steel Ultra 0.42 77.60 85.36
COLORBOND® steel Coolmax® 0.42 56.60 62.26
ZINCALUME® steel 0.48 47.55 52.31
COLORBOND® steel 0.48 53.85 59.24
COLORBOND® steel Ultra 0.48 83.06 91.37
COLORBOND® steel Metallic 0.48 89.56 98.52
COLORBOND® steel 0.60 POA POA
COLORBOND® steel Coolmax® 0.48 64.23 70.65
To convert price to lineal metres multiply by 0.700
Klip-Lok 700 Hi-Strength
Maximum length 27000mm, Minimum length = 750mm Notes: 1. No cut back facility for Klip-Lok 700.2. Longer lengths than listed may be available on application and should be confirmed by the designer.3. Contact your local branch for price and availability of colours not shown as available on page 4 and 5 of this price list.4. Tolerance on sheet lengths +0-15mm, width +4 -4mm5. Packing sheets – $6.00/lm GST EXC (Top and Bottom), $5.00/lm GST EXC (Top or Bottom).6. Please enquire with your local branch about our mobile onsite rolling service.7. COLORBOND® Steel .60 subject to enquiry (mobile rollformed).
Product$/50 box
GST EXC GST INC
Klip-Lok 700 Hi-Strength Clips 193.39 212.73
Clips – Klip-Lok 700 Hi-Strength
Notes: 1.5 clips per m2 (Estimate for non-cyclonic area)
Notes: 3 fasteners per clip (Estimate for non-cyclonic area)
Fasteners – Klip-Lok 700 Hi-Strength
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 40
Ro
ofi
ng
RRP
(Bottom profile shown)
Product Length$/ea
GST EXC GST INC
Klip-Lok 700 Hi-Strength Top 810mm 6.87 7.56
Klip-Lok 700 Hi-Strength Bottom 810mm 6.87 7.56
Standard Flashings – Klip-Lok 700 Hi-Strength
Roof Infill Strips – Klip-Lok 700 Hi-Strength
Translucent Sheeting – Klip-Lok 700 Hi-Strength
Product Grams/m2 $/lmGST EXC GST INC
Fibreglass 2400 93.68 103.05
Maximum length = 12200mm, Minimum length = 900mm Notes: 1. An extra charge will apply to lengths over 11000mm. 2. Available in Clear and Opal. 3 . 32mm Weatherlok Washer required for all
translucent sheeting.
4. Please refer to page 81 for other products in the
Translucent Sheeting range.
Maximum length 8000mm, Minimum length = 1000mm Notes: 1. Refer to page 72 for the complete range of standard flashings. 2. For all other flashings that may vary in dimensions from the standard range, please refer to section on Custom Flashings.
Translucent Sheeting Accessories
ProductZINCALUME® steel
$/lmCOLORBOND® steel
$/lmGST EXC GST INC GST EXC GST INC
Ridge Capping 29.86 32.85 30.47 33.52
Tile Flashing 29.86 32.85 30.47 33.52
Apron Flashing 21.73 23.90 22.17 24.39
Barge Capping 22.90 25.19 23.37 25.71
Valley Gutter 29.86 32.85 30.47 33.52
Product Width (mm) Length$/roll $/1000
GST EXC GST INC GST EXC GST INC
Roofing Wire (2 x 300 x 150mm)
1800mm 50m 280.77 308.85 N/A N/A
Lapseal
50mm x 6mm 11.7m 75.91 83.50 N/A N/A
75mm x 6mm 11.7m 104.23 114.65 N/A N/A
100mm x 6mm 11.7m 133.54 146.89 N/A N/A
Weatherlok Washer (Fibreglass only)
32mm (Dia) N/A N/A 439.03 482.93
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 41
Ro
ofi
ng
RRP
Minimum Recommended
Roof Pitch 0.48 = 1˚ (1 in 50)0.60 = 1˚ (1 in 50)
Finish BMT mm$m2
GST EXC GST INC
ZINCALUME® steel 0.48 52.09 57.30
COLORBOND® steel 0.48 54.97 60.47
COLORBOND® steel 0.60 POA POA
ZINCALUME® steel 0.60 POA POA
Application TypeUnpainted $/1000 Unpainted $/100GST EXC GST INC GST EXC GST INC
Steel battens up to 1.0mm BMT
SW1016N Metal Wafer Head
147.74 162.51 21.30 23.43
Steel purlins 1.2mm to 1.9mm BMT
SW1016N Metal Wafer Head
147.74 162.51 21.30 23.43
Timber-SoftwoodTW1035N Type 17
Wafer Head327.25 359.98 40.07 44.08
Timber-HardwoodTW1025N Type 17
Wafer Head331.27 364.40 33.13 36.44
Note: 2.5 clips per m2 and 2 screws per clip (estimate for non-cyclonic areas).
Fasteners – Klip-Lok 406
Klip-Lok 406
Maximum length = 20000mm, Minimum length = 1000mm Notes: 1. No cut back facility for Klip-Lok 406.2. Longer lengths than listed may be available on application and should be confirmed by the designer.3. Limited colour range available. Contact your local branch for price and availability of colours not shown as available on
page 4 and 5 of this price list.4. Tolerance on sheet lengths +0-15mm, width +4 -4mm5. Packing sheets – $6.00/lm GST EXC (Top and Bottom), $5.00/lm GST EXC (Top or Bottom).
Product$/100 pk $/1000pk
GST EXC GST INC GST EXC GST INC
Klip-Lok 406 Clips (without nails) 176.93 194.62 N/A N/A
Nails to suit N/A N/A 80.60 88.66
Clips – Klip-Lok 406
To convert price to lineal metres multiply by 0.406
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 42
Ro
ofi
ng
RRP
(Bottom profile shown)
Product Length$/ea
GST EXC GST INC
Klip-Lok 406 Top 810mm 6.87 7.56
Klip-Lok 406 Bottom 810mm 6.87 7.56
Product Grams/m2 $/lmGST EXC GST INC
Fibreglass 2400 59.99 65.99
Roof Infill Strips – Klip-Lok 406
Translucent Sheeting – Klip-Lok 406
Maximum length = 12200mm, Minimum length = 900mm Notes: 1. An extra charge will apply to lengths over 11000mm. 2. Available in Clear and Opal. 3 . 32mm Weatherlok Washer required for all
translucent sheeting.
4. Please refer to page 81 for other products in the
Translucent Sheeting range.
Standard Flashings – Klip-Lok 406
Maximum length 8000mm, Minimum length = 1000mm Notes: 1. Refer to page 72 for the complete range of standard flashings.
2. For all other flashings that may vary in dimensions from the standard range, please refer to section on Custom Flashings.
Translucent Sheeting Accessories
ProductZINCALUME® steel
$/lmCOLORBOND® steel
$/lmGST EXC GST INC GST EXC GST INC
Ridge Capping 29.86 32.85 30.47 33.52
Tile Flashing 29.86 32.85 30.47 33.52
Apron Flashing 21.73 23.90 22.17 24.39
Barge Capping 22.90 25.19 23.37 25.71
Valley Gutter 29.86 32.85 30.47 33.52
Product Width (mm) Length$/roll $/1000
GST EXC GST INC GST EXC GST INC
Roofing Wire (2 x 300 x 150mm)
1800mm 50m 280.77 308.85 N/A N/A
Lapseal
50mm x 6mm 11.7m 75.91 83.50 N/A N/A
75mm x 6mm 11.7m 104.23 114.65 N/A N/A
100mm x 6mm 11.7m 133.54 146.89 N/A N/A
Weatherlok Washer (Fibreglass only)
32mm (Dia) N/A N/A 439.03 482.93
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 43
Ro
ofi
ng
RRP
To convert price to lineal metres multiply by 0.305 (for plain)
Notes: 1 fastener per clip. (Estimate for non-cyclonic area)
Notes: 3 clips per m2. (Estimate for non-cyclonic area)
Notes: Contact your local branch for availability and further details.
Minimum recommendedroof pitch
=1˚ (1 in 50)
Finish BMT mm$/m2
GST EXC GST INC
ZINCALUME® steel (plain) 0.70 87.71 96.48
COLORBOND® steel
Plain 0.70 89.50 98.45
Fluted 0.70 POA POA
Fasteners (Clip fixing – roof and wall application)
Longline 305
Product$/100
GST EXC GST INC
Top Fixing Clips 147.77 162.55
Start/Finish Clips 447.06 491.77
Longline 305 Clips
Minimum recommendedroof pitch =1˚ (1 in 50)
Finish BMT mm$/lm
GST EXC GST INC
ZINCALUME® steel 0.70 42.43 46.67
COLORBOND® steel 0.70 43.30 47.63
Longline 305 Tapered
Maximum length = 20000mm (up to 26000mm subject to enquiry), Minimum length = 2500mm Notes: 1. No cut back facilites for Longline 305 and Longline 305 Tapered.2. Longer/shorter lengths than listed may be available on application and should be confirmed by the designer.3. Contact your local branch for price and availability of colours not shown as available on page 4 and 5 of this price list.4. Tolerance on sheet lengths +0-15mm, width +4, -4mm. Tapered longline width +5, -5mm5. Packing sheets – $6.00/lm GST EXC (Top and Bottom), $5.00/lm GST EXC (Top or Bottom).6. Minimum order quantities apply. Plain = 9m2, tapered = 50lm.
Maximum length = 30000mm, Minimum length = 1400mm
Application TypeUnpainted $/1000 Unpainted $/100GST EXC GST INC GST EXC GST INC
Steel battens up to 1.0mm BMT
SW1016N Metal Wafer Head
147.74 162.51 21.30 23.43
Steel purlins 1.2mm to 1.9mm BMT
SW1016N Metal Wafer Head
147.74 162.51 21.30 23.43
Timber-SoftwoodTW1035N Type 17
Wafer Head327.25 359.98 40.07 44.08
Timber-HardwoodTW1025N Type 17
Wafer Head331.27 364.40 33.13 36.44
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 44
Ro
ofi
ng
RRP
Standard Flashings – Longline 305
Maximum length 8000mm, Minimum length = 1000mm, Minimum charge = 1000mm Notes: 1. Refer to page 72 for the complete range of standard flashings. 2. For all other flashings that may vary in dimensions from the standard range, please refer to section on Custom Flashings.
ProductZINCALUME® steel
$/lmCOLORBOND® steel
$/lmGST EXC GST INC GST EXC GST INC
Ridge Capping 29.86 32.85 30.47 33.52
Tile Flashing 29.86 32.85 30.47 33.52
Apron Flashing 21.73 23.90 22.17 24.39
Barge Capping 22.90 25.19 23.37 25.71
Valley Gutter 29.86 32.85 30.47 33.52
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 45
Ro
ofi
ng
RRP
Minimum recommendedroof pitch = 2˚ (1 in 30)
Finish BMT mm$/m2
GST EXC GST INC
COLORBOND® steel Double-Sided Hi-Gloss 80% – (Underside) COLORBOND® steel – (Topside)
0.42 56.42 62.06
Receiver Channel – Flatdek
Roof Infill Strip – Flatdek
Foam Strip – Flatdek
To convert price to lineal metres multiply by 0.250
Flatdek
Maximum length = 9000mm, Minimum length = 450mm Notes: 1. Longer lengths than listed may be available on application and should be confirmed by the designer.2. Contact your local branch for price and availability of colours not shown as available on page 7 of this price list.3. Tolerance on sheet lengths +0-15mm, width +2 -2mm
Notes: 4 fasteners per m2 (Estimate for non-cyclonic area)
Fasteners – Flatdek
Product Length mm$/Im
GST EXC GST INC
Flatdek Receiver Channel 1mm 6100 18.28 20.11
Product Length mm$/ea
GST EXC GST INC
Profile Foam Infill (50mm H x 20mm W)
260 4.78 5.26
Product Length mm$/ea
GST EXC GST INC
Foam Strip for receiver channel (50mm H x 20mm W)
2000 12.16 13.38
Application TypeUnpainted
$/1000Unpainted
$/100Painted $/1000
Painted $/100
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
Steel up to 3.0mm BMT
SH1016 Metal Hex Head
193.55 212.91 25.88 28.47 275.24 302.76 34.04 37.44
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 46
Ro
ofi
ng
RRP
Product Grams/m2 $/lmGST EXC GST INC
Fibreglass 2400 85.21 93.73
Translucent Sheeting – Flatdek
Maximum length = 9000mm, Minimum length = 900mm Notes: 1. An extra charge will apply to lengths over 11000mm.2. Available in Clear and Opal. 3 . 32mm Weatherlok Washer required for all translucent sheeting.4. Please refer to page 81 for other products in the Translucent Sheeting range.
Translucent Sheeting Accessories
Product Width (mm) Length$/roll $/1000
GST EXC GST INC GST EXC GST INC
Roofing Wire (2 x 300 x 150mm)
1800mm 50m 280.77 308.85 N/A N/A
Lapseal
50mm x 6mm 11.7m 75.91 83.50 N/A N/A
75mm x 6mm 11.7m 104.23 114.65 N/A N/A
100mm x 6mm 11.7m 133.54 146.89 N/A N/A
Weatherlok Washer (Fibreglass only) 32mm (Dia) N/A N/A 439.03 482.93
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 47
Ro
ofi
ng
RRP
Rooftrak
Notes: 1. Kits: Rooftrak is supplied in kits that include components and fixings. 2. Dimensions: The Rooftrak 450 system uses two planks (Total 450mm wide)
Rooftrak 675 uses three planks (Total 675mm wide)3. Heavy Duty Rooftrak may be available on application.
Kit 675 shown above.
Description BMT Length (mm)$/ea
GST EXC GST INC
KIT 675 1.2 3018 675.98 743.58
KIT 675 1.2 6073 1262.33 1388.56
675 L Connection Kit 74.61 82.07
675 T Connection Kit 84.88 93.37
675 X Connection Kit 84.88 93.37
675 Start/Finish End Plates Kit 63.25 69.58
675 Support Bracket 58.22 64.04
KIT 450 1.2 3018 470.34 517.37
KIT 450 1.2 6073 838.61 922.47
KIT 450 Heavy Duty 2.0 3018 POA POA
KIT 450 Heavy Duty 2.0 6073 POA POA
450 L Connection Kit 64.18 70.60
450 T Connection Kit 74.61 82.07
450 X Connection Kit 74.61 82.07
450 Start/Finish End Plates Kit 42.25 46.48
450 Support Bracket 43.41 47.75
Universal Support Plate POA POA
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 48
Ro
ofi
ng
RRP
Components supplied in kits – Rooftrak
Description M/Fplanks
M/M planks
Support brackets
Screws (bag)
Rivets (bag)
L bracket
Heel/Toe End plates
KIT 675
6 metre straight run 2 1 5 1 1
3 metre straight run 2 1 3 1 1
L Connection 1 1 3
T Connection 1 2 3
X Connection 1 4
Start/Finish End Plate 6
675 Support Bracket 1
KIT 450
6 metre straight run 1 1 5 1 1
3 metre straight run 1 1 3 1 1
L Connection 1 1 2
T Connection 1 2 2
X Connection 1 4
Start/Finish End Plate 4
450 Support Bracket 1
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 50
Wal
ling
RRP
Application TypeUnpainted
$/1000Unpainted
$/100Painted $/1000
Painted $/100
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
Steel up to 3.0mm BMT
Ripple Zips R825 322.19 354.41 39.29 43.22 397.39 437.13 46.81 51.49
Timber – Softwood
Ripple Zips R825 322.19 354.41 39.29 43.22 397.39 437.13 46.81 51.49
Timber – Hardwood
Ripple Zips R825 322.19 354.41 39.29 43.22 397.39 437.13 46.81 51.49
Finish BMT mm$/m2
GST EXC GST INC
ZINCALUME® steel 0.42 42.09 46.30
COLORBOND® steel 0.42 47.12 51.83
COLORBOND® steel 0.48 POA POA
COLORBOND® steel metallic 0.48 POA POA
Mini Orb Curving charge
Description$/curve
GST EXC GST INC
Mini Orb Curving Charge 31.30 34.43
To convert price to lineal metres multiply by 0.820
Mini Orb
Fasteners – Mini Orb (Pan Fixing – Wall Application only)
Maximum length = 6000mm, Minimum Rollformed length = 1000mm Notes: 1. Minimum cut back is 305mm.2. Cutting charges apply to lengths under 1000mm and may be subject to a longer lead time (refer page 12).3. Cut back not available where colour underside or double-sided colour is requested.4. Longer lengths than listed may be available on application and should be confirmed by the designer.5. Contact your local branch for price and availability of colours not shown as available on page 4 and 5 of this price list.6. Tolerance on sheet lengths +0-15mm, width +2 -2mm.7. Packing sheets – $6.00/lm GST EXC (top and bottom), $5.00/lm GST EXC (top or bottom).8. Mini Orb .48mm BMT may be available subject to inquiry and minimum order quantity.
Notes: 1. Curved sheets longer than 6000mm, or curved heights exceeding 1000mm are subject to enquiry.2. Additional freight charges may apply for curved product.3. For ease of ordering, we recommend the use of the Lysaght Curving Order Forms.
Notes: 1. 8 fasteners per m2 (estimate for non-cyclonic area).
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 51
Wal
ling
RRP
Curving and Bullnosing of Mini Orb
Number of sheets required Sheet length
Colour or finish
Colour Topside or
Colour Underside
Direction of laying (see FRONT VIEW in right-hand column)
Left to right
Right to left
Do the sheets side-lap with previously curved order?
Yes If yes, template required
No
Does the bullnosed sheet end-lap onto a straight sheet?
Yes
No
Have you supplied a template?
Yes
No
Is the template to be returned?
Yes
No
Straight outside section (SR)
mm
Straight Vertical Lead in Section (SV)
mm (50mm min)
Radius (R)
mm (150mm min.)
Angle (P)
degrees(If using 150mm radius, minimum angle is 70˚)
Overall width (A)
mm
Height less straight lead in (H)
mm
Details required for Bullnosing
Notes: 1. Curved sheets longer than 6000mm, or curved heights exceeding 1000mm are subject to enquiry.2. Additional freight charges may apply for curved product.
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 52
Wal
ling
RRP
Cranked Double Curve 180˚ Barrel Vault
Cranked Ridge
Cyma Recta
Old Gothic Double Curve
Details required for Curving of Mini Orb
Concave Convex
Sheet length No. Required
mm
Radius
mm (150 min.)
Height
degrees
Chord width
mm
Colour or Finish
Colour Topside or
Colour Underside
Straight section each side if radius is under 1500mm: – 50mm - min
mm mm
Direction of laying
Left to right
Right to left
Do the sheets side-lap with previously curved order?
Yes If yes, template required
No
Have you supplied a template?
Yes
No
Is the template to be returned?
Yes
No
Additional curving types – (Please supply a detailed drawing – Price POA)
Please tick to indicate type of curving required.
Notes: 1. Curved sheets longer than 6000mm, or curved heights exceeding 1000mm are subject to enquiry.2. Additional freight charges may apply for curved product.
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 53
Wal
ling
RRP
Application TypeUnpainted
$/1000Unpainted
$/100Painted $/1000
Painted $/100
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
Steel battens up to
1.0mm BMT
SH1016 Hex Head with EPDM Sealing Washer
193.55 212.91 25.88 28.47 275.24 302.76 34.04 37.44
Roof Zip R625140.90 per 500
154.99 per 500
36.49 40.14190.64 per 500
209.70 per 500
44.82 49.30
Steel purlins 1.2mm to 1.9mm
BMT
SH1016 Hex Head with EPDM Sealing Washer
193.55 212.91 25.88 28.47 275.24 302.76 34.04 37.44
Timber – Softwood
TH1030 Type 17 Hex Head with EPDM Sealing Washer
366.74 403.41 37.18 40.90 445.13 489.64 44.53 48.98
Roof Zip R625140.90 per 500
154.99 per 500
36.49 40.14190.64 per 500
209.70 per 500
44.82 49.30
Timber – Hardwood
TH1025 Type 17 Hex Head with EPDM Sealing Washer
POA POA POA POA POA POA POA POA
Finish BMT mm$/m2
GST EXC GST INC
ZINCALUME® steel 0.35 27.24 29.96
COLORBOND® steel 0.35 28.86 31.75
To convert price to lineal metres multiply by 0.762
Notes: 5.5 fasteners per m2. (Estimate for non-cyclonic area)
Trimwall
Fasteners – Trimwall
Maximum length = 15000mm, Minimum length = 305mm Notes: 1. Cutting charges apply to lengths under 1000mm and may be subject to a longer lead time (refer page 12)2. Longer lengths than listed may be available on application and should be confirmed by the designer.3. Contact your local branch for price and availability of colours not shown as available on page 4 and 5 of this price list.4. Tolerance on sheet lengths +0-10mm, width +4 -4mm5 . Packing sheets – $6.00/lm GST EXC (top and bottom), $5.00/lm GST EXC (top or bottom).
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 54
Wal
ling
RRP
Finish BMT mm$/m2
GST EXC GST INC
ZINCALUME® steel 0.35 30.74 33.81
COLORBOND® steel 0.35 32.47 35.72
ZINCALUME® steel 0.42 33.74 37.11
COLORBOND® steel 0.42 34.19 37.61
To convert price to lineal metres multiply by 0.850
Panelrib
Fasteners – Panelrib
Maximum length = 8500mm, Minimum length = 960mm Notes: 1. Longer lengths than listed may be available on application and should be confirmed by the designer.2. Contact your local branch for price and availability of colours not shown as available on page 4 and 5 of this price list.3. Tolerance on sheet lengths +0-15mm, width +0-4mm4. Packing sheets – $6.00/lm GST EXC (top and bottom), $5.00/lm GST EXC (top or bottom).
Application TypeUnpainted
$/1000Unpainted
$/100Painted $/1000
Painted $/100
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
Steel battens up to
1.0mm BMT
SH1016 Hex Head with EPDM Sealing Washer
193.55 212.91 25.88 28.47 275.24 302.76 34.04 37.44
Roof Zip R625140.90 per 500
154.99 per 500
36.49 40.14190.64 per 500
209.70 per 500
44.82 49.30
Steel purlins 1.2mm to 1.9mm
BMT
SH1016 Hex Head with EPDM Sealing Washer
193.55 212.91 25.88 28.47 275.24 302.76 34.04 37.44
Timber – Softwood
TH1030 Type 17 Hex Head with EPDM Sealing Washer
366.74 403.41 37.18 40.90 445.13 489.64 44.53 48.98
Roof Zip R625140.90 per 500
154.99 per 500
36.49 40.14190.64 per 500
209.70 per 500
44.82 49.30
Timber – Hardwood
TH1025 Type 17 Hex Head with EPDM Sealing Washer
POA POA POA POA POA POA POA POA
Notes: 5 fasteners per m2. (Estimate for non-cyclonic area)
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 55
Wal
ling
RRP
Finish BMT mm$/m2
GST EXC GST INC
ZINCALUME® steel 0.35 25.43 27.97
COLORBOND® steel 0.35 32.40 35.64
ZINCALUME® steel 0.42 33.40 36.74
COLORBOND® steel 0.42 34.09 37.50
To convert price to lineal metres multiply by 0.840
Multiclad
Fasteners – Multiclad
Maximum length = 8000mm, Minimum length = 300mm Notes: 1. Cutting charges apply if under 500mm.2. Longer lengths than listed may be available on application and should be confirmed by the designer.3. Contact your local branch for price and availability of colours not shown as available on page 4 and 5 of this price list.4. Tolerance on sheet lengths +0-10mm, width +4mm -4mm5. Packing sheets – $6.00/lm GST EXC (top and bottom), $5.00/lm GST EXC (top or bottom).
Application TypeUnpainted
$/1000Unpainted
$/100Painted $/1000
Painted $/100
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
Steel battens up to
1.0mm BMT
SH1016 Hex Head with EPDM Sealing Washer
193.55 212.91 25.88 28.47 275.24 302.76 34.04 37.44
Roof Zip R625140.90 per 500
154.99 per 500
36.49 40.14190.64 per 500
209.70 per 500
44.82 49.30
Steel purlins 1.2mm to 1.9mm
BMT
SH1016 Hex Head with EPDM Sealing Washer
193.55 212.91 25.88 28.47 275.24 302.76 34.04 37.44
Timber – Softwood
TH1030 Type 17 Hex Head with EPDM Sealing Washer
366.74 403.41 37.18 40.90 445.13 489.64 44.53 48.98
Roof Zip R625140.90 per 500
154.99 per 500
36.49 40.14190.64 per 500
209.70 per 500
44.82 49.30
Timber – Hardwood
TH1025 Type 17 Hex Head with EPDM Sealing Washer
POA POA POA POA POA POA POA POA
Notes: 1. 4 fasteners per m2. (Estimate for non-cyclonic area).
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 56
Wal
ling
RRP
Finish BMT mm$/m2
GST EXC GST INC
ZINCALUME® steel 0.42 48.61 53.47
COLORBOND® steel 0.42 49.60 54.56
To convert price to lineal metres multiply by 0.300
Easyclad 2PF 300 (Fluted)
Fasteners – Easyclad
Product$/pk 100
GST EXC GST INC
Easyclad Starting Clip (CD40) 112.13 123.34
Easyclad Starting Clips
Maximum length = 9760mm, Minimum length = 600mm Notes: 1. No cut back facility for Easyclad 2PF 300.2. Longer lengths than listed may be available on application and should be confirmed by the designer.3. Limited colour range available. Contact your local branch for price and availability of colours not shown as available on page 4 and 5 of this price list.4. Tolerance on sheet lengths +0-15mm, width +3 -3mm5. Lengths over 7500mm will incur a packing charge of $37.50 GST EXC per bundle. (Maximum 25 lengths per bundle).6. Packing sheets – $6.00/lm GST EXC (top and bottom), $5.00/lm GST EXC (top or bottom).
Notes: 6 fasteners per m2. First sheet will require CD 40 starting clips. (Estimate for non-cyclonic area)
Application TypeUnpainted
$/1000Unpainted
$/100Painted $/1000
Painted $/100
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
Steel battens up to
1.0mm BMT
SH1016 Hex Headwith EPDM Sealing
Washer
193.55 212.91 25.88 28.47 275.24 302.76 34.04 37.44
Roof Zip R625140.90 per 500
154.99 per 500
36.49 40.14190.64 per 500
209.70 per 500
44.82 49.30
Steel purlins 1.2mm to
1.9mm BMT
SH1016 Hex Head with EPDM Sealing Washer
193.55 212.91 25.88 28.47 275.24 302.76 34.04 37.44
Timber – Softwood
TH1030 Type 17 Hex Head with EPDM Sealing Washer
366.74 403.41 37.18 40.90 445.13 489.64 44.53 48.98
Roof Zip R625140.90 per 500
154.99 per 500
36.49 40.14190.64 per 500
209.70 per 500
44.82 49.30
Timber – Hardwood
TH1025 Type 17 Hex Head with EPDM Sealing Washer
POA POA POA POA POA POA POA POA
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 57
Wal
ling
RRP
Profile Product Suitable forZINCALUME® steel
0.55 $/lmCOLORBOND® steel
0.55 $/lmGST EXC GST INC GST EXC GST INC
CD 1 Trim Channel Multiclad – – 19.30 21.23
CD 3 Fascia to Soffit SectionPanelribMulticladMini Orb
– – 20.51 22.56
CD 4 Feature Section SoffitPanelribMulticladMini Orb
– – 19.30 21.23
CD 5 External Corner Trim
Panelrib (*)Multiclad
Mini Orb (*)2PF 300
17.97 19.77 18.10 19.91
CD 6 Internal Corner Trim
Panelrib (*)Multiclad
Mini Orb (*)2PF 300
17.97 19.77 18.10 19.91
CD 8 Purlin Hat Section
ZINCALUME® steel
Multiclad2PF 300
16.71 18.38 – –
CD 15 Tee Section
Panelrib (*)Multiclad
Mini Orb (*)2PF 300
21.95 24.15 22.42 24.66
CD 20 Butt Joint Trim – Top HatPanelribMulticladMini Orb
– – 16.89 18.58
Suggested Walling Metal Trims
Note: *Suitable only to these profiles in certain applications.
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 58
Wal
ling
RRP
Profile Product Suitable forZINCALUME® steel
0.55 $/lmCOLORBOND® steel
0.55 $/lmGST EXC GST INC GST EXC GST INC
CD 21 Butt Joint Trim – Overlap Multiclad (1) 16.71 18.38 16.89 18.58
CD 22 Edge TrimMulticlad (2)Mini Orb (1)
16.71 18.38 16.89 18.58
CD 23 External Corner
PanelribMulticlad (1)2PF 300 (1)Mini Orb
17.97 19.77 18.10 19.91
CD 24 Internal Corner
PanelribMulticlad (1)
Mini Orb2PF 300 (1)
17.97 19.77 18.10 19.91
CD 27 Fascia to Soffit Section PanelribMulticladMini Orb
20.48 22.53 20.51 22.56
CD 30 Fascia Capping
Trimwall (3)Panelrib (3)Multiclad (3)Mini Orb (3)2PF 300 (3)
20.78 22.86 21.21 23.33
CD 39 Trim Channel 2PF 300 19.23 21.15 19.30 21.23
EC 3 Fascia Capping
Trimwall (3)Panelrib (3)Multiclad (3)Mini Orb (3)2PF 300 (3)
24.07 26.48 24.58 27.04
Suggested Walling Metal Trims
Notes: 1. Suitable only to these profiles in certain applications.2. Fit may be tight.3. Suitable depending on support details.
• LYSAGHT NOVALINE® Fascia & Accessories
• Hi-Front Quad Gutter & Accessories
• Lo-Front Quad Gutter & Accessories
• LYSAGHT SHEERLINE® Gutter & Accessories
• LYSAGHT TRIMLINE® Gutter & Accessories
• LYSAGHT 150mm Half Round Gutter & Accessories
• LYSAGHT 150mm Half Round Flatback Gutter & Accessories
• Half Round Gutter & Accessories
• Downpipe & Accessories
• Tradework
• Standard Flashings & Accessories
• Custom Flashings, Cappings & Gutters
Rainwater Products NSW/ACT Price list
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
60
Rai
nwat
er
RRP
DescriptionZINCALUME® steel $/lm COLORBOND® steel $/lm
GST EXC GST INC GST EXC GST INC
Spring Clip 1.65 1.82 N/A N/A
Splice Plate-Internal 5.02 5.52 N/A N/A
Internal Corner90˚ 8.16 8.98 8.16 8.98
45˚ 12.14 13.35 12.14 13.35
External Corner90˚ 8.16 8.98 8.16 8.98
45˚ 12.14 13.35 12.14 13.35
Internal Cover Cap 90˚ 3.85 4.24 3.85 4.24
Barge Mould R/H 7.76 8.54 7.76 8.54
Barge Mould L/H 7.76 8.54 7.76 8.54
Apex Cover 4.81 5.29 4.81 5.29
Multi-purpose Brackets 2.46 2.71 N/A N/A
Hip Rafter Bracket 2.46 2.71 N/A N/A
Description BMTZINCALUME® steel $/lm COLORBOND® steel $/lmGST EXC GST INC GST EXC GST INC
Novaline Fascia 0.42 14.77 16.25 15.07 16.58
Novaline Fascia Cover 0.42 14.77 16.25 15.07 16.58
Novaline Fascia & Novaline Fascia Cover
Novaline Fascia Accessories
Maximum length* = 9000mm, Minimum length* = 500mm (Fascia)Maximum length* = 6000mm, Minimum length* = 1000mm (Fascia Cover)Notes: 1. Contact your local branch for price and availability of colours not shown as available on page 6 and 7 of this price list.2. Check with your local branch for availability of stock lengths.3. Variations to minimum and maximum length may apply at your local branch.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
61
Rai
nwat
er
RRP
Description Finish$/lm
GST EXC GST INC
Custom Cut
ZINCALUME® steel 15.03 16.53
COLORBOND® steel 15.34 16.87
COLORBOND® steel Hi-Gloss 17.45 19.20
Description Finish$/ea
GST EXC GST INC
Internal Bracket ZINCALUME® steel 2.92 3.21
External BracketZINCALUME® steel 2.92 3.21
Powder Coated 5.48 6.03
Stop End Plates (Pair)ZINCALUME® steel
8.83 (pair)
9.71 (pair)
COLORBOND® steel9.00 (pair)
9.90 (pair)
Internal Corner90˚ or 45˚
Unpainted 24.36 26.80
Powder Coated 24.69 27.16
External Corner90˚ or 45˚
Unpainted 24.36 26.80
Powder Coated 24.69 27.16
Overstrap (for use with Novaline Fascia)
ZINCALUME® steel 3.58 3.94
Hi-Front Quad – (Available plain and slotted)
Hi-Front Gutter Accessories
Maximum length* = 9000mm, Minimum length* = 500mm Notes: 1. Contact your local branch for price and availability of colours not shown as available on page 6 and 7 of this price list.2. Check with your local branch for availability of stock lengths.3. *Variations to minimum and maximum length may apply at your local branch.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
62
Rai
nwat
er
RRP
DescriptionZINCALUME® steel $/lm COLORBOND® steel $/lmGST EXC GST INC GST EXC GST INC
Custom Cut 13.11 14.42 14.71 16.18
Description Finish$/ea
GST EXC GST INC
Internal Bracket ZINCALUME® steel 2.61 2.87
External BracketZINCALUME® steel 2.61 2.87
Powder Coated 4.88 5.37
Stop End Plates (Pair)ZINCALUME® steel
11.92 (pair)
13.11 (pair)
COLORBOND® steel12.00 (pair)
13.20 (pair)
Internal Corner90˚ or 45˚
Unpainted 27.89 30.68
Powder Coated 28.07 30.88
External Corner90˚ or 45˚
Unpainted 27.89 30.68
Powder Coated 28.07 30.88
Overstrap (for use with Novaline Fascia)
ZINCALUME® steel 3.58 3.94
Lo-Front Gutter Accessories
Lo-Front Quad – (Available plain only)
Maximum length = 9000mm, Minimum length = 1000mm Notes: 1. Contact your local branch for price and availability of colours not shown as available on page 6 and 7 of this price list.2. Check with your local branch for availability of stock lengths.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
63
Rai
nwat
er
RRP
Description Finish$/lm
GST EXC GST INC
Custom Cut
ZINCALUME® steel 18.42 20.26
COLORBOND® steel 19.72 21.69
COLORBOND® steel Hi-Gloss 22.42 24.66
Description Finish$/lm
GST EXC GST INC
Custom CutZINCALUME® steel 19.54 21.49
COLORBOND® steel 22.32 24.55
Description Finish$/100 $/pair
GST EXC GST INC GST EXC GST INC
General purpose bracket ZINCALUME® steel 251.83 277.01 N/A N/A
Universal Gutter Clip (SGCI) ZINCALUME® steel 184.27 202.70 N/A N/A
External End Stop Sold in pairs (Fascia style)
ZINCALUME® steel N/A N/A 17.74 19.51
COLORBOND® steel N/A N/A 17.74 19.51
Internal End Stop Sold in pairs (Plain) supplied as standard
ZINCALUME® steel N/A N/A 17.74 19.51
COLORBOND® steel N/A N/A 17.74 19.51
Zed bracketHot dipped Galvanised
1086.67 1195.34 N/A N/A
Sheerline Gutter – (Available plain or slotted)
Sheerline Capping
Sheerline Gutter Accessories
Maximum length* = 9000mm, Minimum length = 1200mm Notes: 1. Contact your local branch for price and availability of colours not shown as available on page 6 and 7 of this price list.2. Check with your local branch for availability of stock lengths.3. *Variations to minimum and maximum length may apply at your local branch.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
64
Rai
nwat
er
RRP
DescriptionZINCALUME® steel $/lm COLORBOND® steel $/lmGST EXC GST INC GST EXC GST INC
Custom Cut 16.47 18.12 17.22 18.94
Description PerZINCALUME® steel $ COLORBOND® steel $GST EXC GST INC GST EXC GST INC
General Purpose Bracket each 2.55 2.81 N/A N/A
Stop End pair 7.78 8.56 7.78 8.56
Gutter Overstrap (For use with Novaline Fascia)
each 3.58 3.94 N/A N/A
Trimline Gutter – (Available plain or slotted)
Trimline Gutter Accessories
Maximum length = 9000mm, Minimum length = 500mm Notes: 1. Contact your local branch for price and availability of colours not shown as available on page 6 and 7 of this price list.2. Not available in Sydney, Canberra and Southern NSW region.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
65
Rai
nwat
er
RRP
DescriptionZINCALUME® steel $/ea COLORBOND® steel $/ea
GST EXC GST INC GST EXC GST INC
90mm Round POA POA POA POA
100 x 50 POA POA POA POA
100 x 75 POA POA POA POA
Maximum length = 9000mm, Minimum length = 1000mm Notes: 1. LYSAGHT Half Round Gutter 150mm will be supplied slotted unless specifically requested to be plain.2. Contact your local branch for price and availability of colours not shown as available on page 6 and 7 of this price list.
DescriptiionZINCALUME® steel $/lm COLORBOND® steel $/lm
GST EXC GST INC GST EXC GST INC
LYSAGHT Half Round Gutter 150mm
Available plain & slotted
POA POA POA POA
LYSAGHT Half Round Gutter 150mm
DescriptionZINCALUME® steel $/ea Painted $/ea
GST EXC GST INC GST EXC GST INC
Stop Ends POA POA POA POA
External Brackets POA POA POA POA
Cast External Corners 90deg
POA POA POA POA
Cast External Corners 45deg
POA POA POA POA
Cast Internal Corners 90deg
POA POA POA POA
Cast Internal Corners 45deg
POA POA POA POA
LYSAGHT Half Round Gutter 150mm Accessories
Notes: Refer to your downpipe accessories discount to determine price for nozzles.
Downpipe – Nozzle/Pop
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
66
Rai
nwat
er
RRP
DescriptionZINCALUME® steel $/ea COLORBOND® steel $/ea
GST EXC GST INC GST EXC GST INC
90mm Round POA POA POA POA
100 x 50 POA POA POA POA
100 x 75 POA POA POA POA
Maximum length = 9000mm, Minimum length = 1000mm Notes: 1. LYSAGHT Half Round Flatback Gutter 150mm will be supplied slotted unless specifically requested to be plain.2. Contact your local branch for price and availability of colours not shown as available on page 6 and 7 of this price list.
DescriptionZINCALUME® steel $/lm COLORBOND® steel $/lm
GST EXC GST INC GST EXC GST INC
LYSAGHT Half Round Flatback Gutter
150mm Available plain & slotted
POA POA POA POA
LYSAGHT Half Round Flatback Gutter 150mm
DescriptionZINCALUME® steel $/ea Painted $/ea
GST EXC GST INC GST EXC GST INC
Stop Ends POA POA POA POA
Concealed suspension bracket
(Flatback general purpose bracket)
POA POA POA POA
Overstraps POA POA POA POA
Cast External Corners 90deg
POA POA POA POA
Cast External Corners 45deg
POA POA POA POA
Cast Internal Corners 90deg
POA POA POA POA
Cast Internal Corners 45deg
POA POA POA POA
LYSAGHT Half Round Flatback Gutter 150mm Accessories
Notes: Refer to your downpipe accessories discount to determine price for nozzles.
Downpipe – Nozzle/Pop
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
67
Rai
nwat
er
RRP
DescriptionZINCALUME® steel $/ea Painted $/ea
GST EXC GST INC GST EXC GST INC
Half Round A4 Bracket
200mm 99.06 108.97 116.30 127.93
250mm 117.02 128.72 134.33 147.76
300mm 126.05 138.66 146.31 160.94
A1 Fascia Bracket
100mm 39.61 43.57 45.88 50.47
125mm 40.26 44.29 48.78 53.66
200mm 44.94 49.43 56.26 61.89
Stop EndZINCALUME® steel $/pair Painted $/pairGST EXC GST INC GST EXC GST INC
100mm 44.78 49.26 72.28 79.51
125mm 44.78 49.26 72.28 79.51
200mm 49.67 54.64 76.99 84.69
250mm 144.64 159.10 162.85 179.14
300mm 149.51 164.46 170.28 187.31
Notes: Refer to your downpipe accessories discount to determine price for nozzles.
Half Round Gutter Accessories
SizeZINCALUME® steel $/lm COLORBOND® steel $/lm
GST EXC GST INC GST EXC GST INC
100mm 23.96 26.36 24.45 26.90
125mm 23.96 26.36 24.45 26.90
200mm 30.10 33.11 30.71 33.78
250mm 37.17 40.89 37.93 41.72
300mm 46.28 50.91 47.33 52.06
Half Round Gutters – (Plain only)
Notes: 1. Available in 3000mm and 6000mm lengths only. Other sizes and finishes available on request. 2. Lead time subject to enquiry. 3. Additional accessories subject to enquiry.
DescriptionZINCALUME® steel $/ea COLORBOND® steel $/ea
GST EXC GST INC GST EXC GST INC
75mm 80.22 88.24 87.59 96.35
90mm 80.22 88.24 87.59 96.35
100mm 80.22 88.24 87.59 96.35
Downpipe – Nozzle/Pop
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
68
Rai
nwat
er
RRP
DescriptionZINCALUME® steel $/ea COLORBOND® steel $/ea
GST EXC GST INC GST EXC GST INC
75mm 9.74 10.71 9.74 10.71
90mm 10.51 11.56 10.51 11.56
100mm 11.01 12.11 11.01 12.11
100 x 50mm 3.19 3.51 3.98 4.38
100 x 75mm 3.29 3.62 3.98 4.38
100 x 100mm 12.74 14.01 12.74 14.01
Downpipe – Astragals/Brackets
DescriptionZINCALUME® steel $/ea
GST EXC GST INC
75mm diameter 13.21 14.53
90mm diameter 14.30 15.73
100mm diameter 16.44 18.08
100 x 50mm 10.63 11.69
100 x 75mm 10.63 11.69
100 x 100mm 24.84 27.32
Downpipe – Nozzle/Pop
Size Length mm
ZINCALUME® $/ea COLORBOND® $/ea Hi Gloss $/eaGST EXC GST INC GST EXC GST INC GST EXC GST INC
100mm x 50mm1800 33.29 36.62 37.80 41.58 42.99 47.29
2400 44.42 48.86 49.68 54.65 57.33 63.06
100mm x 75mm1800 38.57 42.43 43.02 47.32 48.88 53.77
2400 50.65 55.72 56.71 62.38 64.46 70.91
100mm x 100mm1800 54.25 59.68 75.30 82.83 POA POA
2400 72.33 79.56 97.89 107.68 POA POA
75mm 2400 61.03 67.13 67.12 73.83 POA POA
90mm 2400 70.80 77.88 81.74 89.91 POA POA
100mm 2400 74.26 81.69 77.70 85.47 POA POA
Downpipes
Notes: 1. Other sizes and finishes are available on request.2. Contact your local Branch for stock availability & lead time.
Description
ZINCALUME® steel $/eaGST EXC GST INC
100 x 75/90mm (Uni-Drop) 10.63 11.69
Downpipe – Uni-Drop
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
69
Rai
nwat
er
RRP
DescriptionZINCALUME® steel $/ea COLORBOND® steel $/eaGST EXC GST INC GST EXC GST INC
100 x 50mm 109.23 120.15 117.68 129.45
100 x 75mm 113.28 124.61 126.59 139.25
DescriptionZINCALUME® steel $/ea COLORBOND® steel $/eaGST EXC GST INC GST EXC GST INC
100 x 50 POA POA POA POA
100 x 75 POA POA POA POA
DescriptionZINCALUME® steel $/ea COLORBOND® steel $/eaGST EXC GST INC GST EXC GST INC
75mm round POA POA POA POA
90mm round POA POA POA POA
100mm round POA POA POA POA
Downpipe Offsets – (2 piece)
DescriptionZINCALUME® steel $/eaGST EXC GST INC
75mm 34.68 38.15
90mm 44.54 48.99
100mm 51.95 57.15
Description$/ea
GST EXC GST INC
Nominate diameter and material POA POA
Crimped Bends – (45˚ or 90˚ angles)
Downpipe – Standoff Brackets
Notes: Long tail available on request.
Notes: Please advise location of seam.
Notes: Please advise location of seam.
Downpipe Bends/Shoes (45˚ or 90˚ angles)
Downpipe Bends/Shoes (45˚ or 90˚ angles)
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
70
Rai
nwat
er
RRP
Description DimensionsZL $/ea CB $/ea
GST EXC GST INC GST EXC GST INC
Lysaght Standard Rainwater head
390 W x 300H x 250 D mm 123.73 136.10 126.25 138.88
Tapered Rainwater Heads(Downpipe outlet not included)
Small: 380W x 175H x 200D mmLarge: 450W x 250H x 250D mmTo your dimensioned drawing.
POA POA POA POA
Custom made square rainwater heads(Downpipe outlet not included)
To your dimensioned drawing. POA POA POA POA
Custom made round rainwater heads
To your dimensioned drawing. POA POA POA POA
Corner Ogee rainwater headTo your dimensioned drawing.
Available in copper, galvanised and stainless steel.
POA POA POA POA
Ogee rainwater head Small: 310 x 200mm
Large: 400 x 250mm Available in copper, galvanised and stainless steel.
POA POA POA POA
Chinaman’s Hats
Made to orderSizes from 150 – 400mm
POA POA POA POA
BlueScope Lysaght NSW manufacture a vast range of Tradework made from a various range of metals and finishes including:
• ZINCALUME® steel G300: 0.55mm, 1.00mm, 1.2mm, 1.6mm BMT; • Galvabond G2: 0.55mm, 0.80mm, 1.00mm, 1.2mm, 1.6mm BMT; • COLORBOND® steel, COLORBOND® steel Ultra, COLORBOND® steel
Metallic 0.55mm BMT;
• Copper: 0.55mm BMT; • Stainless Steel: Grade 304, Grade 316 (Marine Grade) –
Customer to nominate grade.
Pricing: All pricing, apart from Lysaght Standard Rainwater Heads is on application. Please contact your local branch for this information.Ordering: For all Tradework, detailed drawings are required including material, finish, grade (stainless steel), dimensions, flanges and nozzle placements.To order rainheads and sumps, please supply detailed drawings also showing front and side elevations.
Tradework
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
71
Rai
nwat
er
RRP
Description DimensionsZL $/ea CB $/ea
GST EXC GST INC GST EXC GST INC
Louvres Square/Rectangular:To your dimensioned drawing, template or photograph. Powder coated for non-standard colours.
POA POA POA POA
Vented ridge Throat size:
300, 350, 400, 450, 500, 550, 600mm Supplied unassembled.
POA POA POA POA
Box Gutters
Nominate dimensions and material. POA POA POA POA
Sumps Dimensions: 200 x 200 x 150mm to 600 x 600 x 150mm Custom made to your specifications.
POA POA POA POA
Leaf Guard
To your dimensioned drawing. POA POA POA POA
Overflows
To your dimensioned drawing. POA POA POA POA
Folded trays With 50mm turnup and safety edgeSizes: 400 x 400, 450 x 450, 500 x 500, 550 x 550, 600 x 600, 700 x 700, 750 x 750, 900 x 900, 1000 x 1000
POA POA POA POA
Trilok
POA POA POA POA
SpreadersRound/RectangularTo your dimensioned drawing.
POA POA POA POA
Downpipe Guards
To your dimensioned drawing. POA POA POA POA
Curved flashingsNominate dimensions and materials Submit detailed drawings and templates.
POA POA POA POA
Stand off brackets
Nominate diameter and material POA POA POA POA
Tradework
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
72
Rai
nwat
er
RRP
Profile DescriptionZINCALUME® steel $/lm COLORBOND® steel $/lmGST EXC GST INC GST EXC GST INC
Barge Gutter*Stock lengths only1500, 3000, 4500, 6000mm
N/A N/A 18.58 20.44
Ridge Capping 29.86 32.85 30.47 33.52
Roll Top Ridge Capping** 22.64 24.90 23.10 25.41
Tile Flashing or Change of Pitch Flashing
29.86 32.85 30.47 33.52
Apron Flashing 21.73 23.90 22.17 24.39
Valley Gutter(Typical domestic application)
29.86 32.85 30.47 33.52
Barge Capping 22.90 25.19 23.37 25.71
Ribbed Valley Stock lengths: 3000, 4000, 5000, 6000mm
29.62 32.58 N/A N/A
Structural Valley 32.88 36.17 33.55 36.91
Barge Roll 14.15 15.57 17.41 19.15
Barge Roll Capping 22.29 24.52 28.37 31.21
Box Gutter Support (6m length only)
34.33 37.76 N/A N/A
Adjustable box gutter brackets$/ea $/ea
GST EXC GST INC GST EXC GST INC
250 – 400mm 17.38 19.12 N/A N/A
400 – 650mm 20.36 22.40 N/A N/A
650 – 1000mm 26.38 29.02 N/A N/A
Spear Point 50.32 55.35 50.66 55.73
Standard Flashings & Accessories – (Refer to relevant product profile for correct dimensions)
Note:1. Selected Flashing Profiles may also be available in Galvanised, Ultra & Metallic finishes. Please refer toCustom
Flashings page 74-79 for pricing.2. *Barge Gutter subject to barge gutter discount, not flashing discount.3. **Roll Top Ridge Capping may be available in stock lengths in selected colours (check with your local
branch for availability).
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
73
Rai
nwat
er
RRP
Custom flashings, cappings & gutters
Order requirementsOn a sketch show
1. Profile type.
2. Colour/material type.
3. Side on which colour is to be (use letters shown below).
4. Dimensions (use letters shown below).
5. Angles on all bends.
6. Quantity and lengths.
Bondek Edgeform
Order example
1. CF52. Classic Cream3. Colour on ‘B’ side4. A = 90mm, B = 45mm, C = 15mm5. Angle B–C = 45 degrees6. 4 off, 2750mm
This page shows a selection of non-standard profile types. Other options are available.
Examples of available profile types. For ease of ordering we recommend the use of our Lysaght Flashing Pad (available on request).
Notes: Extra charges apply for tapered flashings. Refer to page 12.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
74
Rai
nwat
er
RRP
Custom Flashings – ZINCALUME® steel 0.55mm Price GST EXC $/lm
Custom Flashings – COLORBOND® steel 0.55mm Price GST EXC $/lm
Fold Girth 100 200 300 400 500 600 750 900 1000 1200
0 12.94 16.10 20.00 27.78 32.87 37.11 44.42 51.85 53.72 57.39
1 12.94 16.10 20.00 27.78 32.87 37.11 44.42 51.85 53.72 57.39
2 14.20 17.27 21.73 29.04 34.12 38.36 45.68 53.11 54.98 58.65
3 15.46 18.44 22.90 30.30 35.38 39.62 46.93 54.37 56.23 59.91
4 16.71 19.61 24.07 31.55 36.64 40.88 48.19 55.62 57.49 61.16
5 17.97 20.78 25.24 32.81 37.89 42.14 49.45 56.88 58.75 62.42
6 19.23 21.95 26.41 33.98 39.15 43.39 50.70 58.14 60.01 63.68
7 20.48 23.12 27.58 35.15 40.41 44.65 51.96 59.39 61.26 64.94
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 13.28 16.39 20.96 28.05 33.55 38.72 46.74 54.57 57.16 62.32
1 13.28 16.39 20.96 28.05 33.55 38.72 46.74 54.57 57.16 62.32
2 14.48 17.60 22.17 29.26 34.75 39.93 47.95 55.77 58.36 63.53
3 15.69 18.80 23.37 30.47 35.96 41.13 49.15 56.98 59.57 64.73
4 16.89 20.01 24.58 31.67 37.16 42.34 50.36 58.18 60.77 65.94
5 18.10 21.21 25.78 32.88 38.37 43.54 51.56 59.39 61.98 67.15
6 19.30 22.42 26.99 34.08 39.57 44.75 52.77 60.60 63.18 68.35
7 20.51 23.62 28.19 35.29 40.78 45.95 53.97 61.80 64.39 69.56
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 15.42 19.85 25.71 33.41 39.47 44.50 53.36 62.38 64.57 68.92
1 15.42 19.85 25.71 33.41 39.47 44.50 53.36 62.38 64.57 68.92
2 16.93 21.36 27.22 34.92 40.98 46.00 54.87 63.89 66.08 70.43
3 18.43 22.85 28.72 36.43 42.48 47.51 56.38 65.39 67.59 71.94
4 19.94 24.35 30.23 37.93 43.99 49.02 57.89 66.89 69.09 73.44
5 21.44 25.86 31.73 39.44 45.50 50.53 59.39 68.40 70.60 74.95
6 22.95 27.37 33.24 40.93 46.99 52.02 60.89 69.91 72.09 76.46
7 24.46 28.88 34.75 42.44 48.50 53.52 62.38 71.42 73.60 77.96
Custom Flashings – Galvanised 0.55mm Price GST EXC $/lm
Notes:1. Additional folds add $1.15 per/lm (GST EXC) per bend.2. Lysaght Custom Flashings are sold/invoiced by finish, girth and number of bends.3. Crush and Folds = 2 bends.4. Girths not listed in table will be charged at next largest girth rate.5. Flat sheet. Longest length delivered is 2400mm. For longer lengths and girths over 800mm, please
check with your local branch re availability.6. Maximum length = 8000mm, Minimum length = 100mm, Minimum charge = 1000mm7. Above pricing refers to standard colours listed in our colour availability chart on page 6 and 7.8. Other materials may be available on request.9. An extra charge of $2.64/m (GST EXC) applies to tapered flashings.10. For ease in ordering we recommend the use of our flashing order form (available on request).
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
75
Rai
nwat
er
RRP
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 18.57 26.66 34.20 39.75 48.73 53.90 70.68 77.20 85.41 100.83
1 18.57 26.66 34.20 39.75 48.73 53.90 70.68 77.20 85.41 100.83
2 19.80 27.88 35.43 40.98 49.97 55.11 71.91 78.40 86.64 102.05
3 21.03 29.10 36.65 42.20 51.18 56.34 73.14 79.64 87.85 103.27
4 22.24 30.33 37.87 43.43 52.41 57.58 74.37 80.85 89.08 104.51
5 23.48 31.56 39.10 44.64 53.64 58.79 75.57 82.09 90.30 105.72
6 24.69 32.78 40.33 45.87 54.86 60.02 76.81 83.31 91.53 106.95
7 25.93 34.01 41.54 47.10 56.08 61.23 78.03 84.53 92.75 108.17
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 14.05 17.30 22.08 29.52 35.24 40.64 49.05 57.24 59.94 62.64
1 14.05 17.30 22.08 29.52 35.24 40.64 49.05 57.24 59.94 65.34
2 15.27 18.50 23.30 30.72 36.44 41.85 50.24 58.44 61.14 66.55
3 16.46 19.72 24.49 31.92 37.65 43.06 51.45 59.65 62.36 67.76
4 17.68 20.92 25.71 33.13 38.85 44.26 52.66 60.85 63.56 68.97
5 18.89 22.13 26.92 34.34 40.06 45.47 53.86 62.07 64.76 70.18
6 20.09 23.34 28.12 35.55 41.27 46.68 55.08 63.27 65.98 71.38
7 21.30 24.54 29.33 36.75 42.48 47.88 56.28 64.49 67.17 72.59
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 18.57 26.66 34.20 39.76 48.73 53.90 70.69 77.20 85.41 100.83
1 18.57 26.66 34.20 39.76 48.73 53.90 70.69 77.20 85.41 100.83
2 19.80 27.89 35.43 40.98 49.96 55.11 71.91 78.41 86.64 102.05
3 21.03 29.10 36.66 42.20 51.19 56.34 73.13 79.64 87.85 103.27
4 22.25 30.33 37.87 43.42 52.41 57.58 74.37 80.85 89.09 104.50
5 23.48 31.54 39.10 44.64 53.64 58.79 75.58 82.08 90.31 105.72
6 24.69 32.77 40.32 45.87 54.85 60.02 76.81 83.32 91.53 106.95
7 25.92 34.01 41.55 47.10 56.08 61.23 78.03 84.53 92.75 108.17
Custom Flashings – Hi Gloss 0.55mm Price GST EXC $/lm
Custom Flashings – Metallic 0.55mm Price GST EXC $/lm
Notes:1. Additional folds add $1.15 per/lm (GST EXC) per bend.2. Lysaght Custom Flashings are sold/invoiced by finish, girth and number of bends.3. Crush and Folds = 2 bends.4. Girths not listed in table will be charged at next largest girth rate.5. Flat sheet. Longest length delivered is 2400mm. For longer lengths and girths over 800mm, please
check with your local branch re availability.6. Maximum length = 8000mm, Minimum length = 100mm, Minimum charge = 1000mm7. Above pricing refers to standard colours listed in our colour availability chart on page 6 and 7.8. Other materials may be available on request.9. An extra charge of $2.64/m (GST EXC) applies to tapered flashings.10. For ease in ordering we recommend the use of our flashing order form (available on request).
Custom Flashings – Ultra 0.55mm Price GST EXC $/lm
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
76
Rai
nwat
er
RRP
Custom Flashings – ZINCALUME® steel 1.2mm Price GST EXC $/lm
Custom Flashings – Galvanised 1.2mm Price GST EXC $/lm
Custom Flashings – Galvanised 1.6mm Price GST EXC $/lm
Custom Flashings – Galvanised 1.0mm Price GST EXC $/lm
Notes:1. Additional folds add $1.15 per/lm (GST EXC) per bend.2. Lysaght Custom Flashings are sold/invoiced by finish, girth and number of bends.3. Crush and Folds = 2 bends.4. Girths not listed in table will be charged at next largest girth rate.5. Flat sheet. Longest length delivered is 2400mm. For longer lengths and girths over 800mm, please check with
your local branch re availability.6. Maximum length = 8000mm (1.6mm = 4000mm), Minimum length = 100mm, Minimum charge = 1000mm7. Above pricing refers to standard colours listed in our colour availability chart on page 6 and 7.8. Other materials may be available on request.9. An extra charge of $2.64/m (GST EXC) applies to tapered flashings.10. For ease in ordering we recommend the use of our flashing order form (available on request).
Custom Flashings – ZINCALUME® steel 1.0mm Price GST EXC $/lm
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 31.42 39.45 50.08 63.93 75.06 84.30 100.36 116.63 120.66 128.68
1 31.42 39.45 50.08 63.93 75.06 84.30 100.36 116.63 120.66 128.68
2 32.96 40.99 51.63 65.47 76.61 85.86 101.90 118.18 122.21 130.22
3 34.52 42.53 53.17 67.01 78.15 87.40 103.44 119.72 123.75 131.77
4 36.06 44.08 54.72 68.56 79.69 88.94 104.99 121.27 125.29 133.31
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 29.27 37.06 47.26 60.79 71.42 80.25 95.75 111.52 115.37 123.03
1 29.27 37.06 47.26 60.79 71.42 80.25 95.75 111.52 115.37 123.03
2 30.77 38.57 48.77 62.30 72.92 81.73 97.26 113.02 116.87 124.54
3 32.28 40.08 50.27 63.80 74.42 83.24 98.75 114.52 118.38 126.04
4 33.78 41.58 51.78 65.31 75.93 84.75 100.26 116.03 119.89 127.55
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 32.28 40.53 51.39 65.54 76.91 86.38 102.83 119.46 123.59 131.83
1 32.28 40.53 51.39 65.54 76.91 86.38 102.83 119.46 123.59 131.83
2 33.78 42.03 52.90 67.04 78.42 87.89 104.33 120.96 125.09 133.32
3 35.29 43.52 54.41 68.55 79.93 89.40 105.84 122.47 126.60 134.83
4 36.80 45.03 55.92 70.06 81.44 90.89 107.34 123.98 128.10 136.34
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 36.67 46.22 58.85 75.49 88.54 99.43 118.52 137.95 142.68 152.12
1 36.67 46.22 58.85 75.49 88.54 99.43 118.52 137.95 142.68 152.12
2 38.21 47.76 60.39 77.03 90.10 100.97 120.08 139.49 144.23 153.66
3 39.76 49.31 61.94 78.58 91.64 102.52 121.62 141.04 145.77 155.21
4 41.30 50.86 63.48 80.13 93.19 104.06 123.17 142.58 147.33 156.76
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 45.68 57.32 72.74 93.03 108.97 122.22 145.53 169.24 175.00 186.50
1 45.68 57.32 72.74 93.03 108.97 122.22 145.53 169.24 175.00 186.50
2 47.09 58.73 74.15 94.45 110.38 123.64 146.94 170.65 176.41 187.92
3 48.51 60.16 75.57 95.86 111.79 125.05 148.36 172.07 177.82 189.33
4 49.92 61.56 76.98 97.27 113.21 126.46 149.77 173.48 179.24 190.75
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
77
Rai
nwat
er
RRP
Custom Flashings – ZINCALUME® steel 0.55mm Price GST INC $/lm
Custom Flashings – COLORBOND® steel 0.55mm Price GST INC $/lm
Fold Girth 100 200 300 400 500 600 750 900 1000 1200
0 14.23 17.71 22.00 30.56 36.16 40.82 48.86 57.04 59.09 63.13
1 14.23 17.71 22.00 30.56 36.16 40.82 48.86 57.04 59.09 63.13
2 15.62 19.00 23.90 31.94 37.53 42.20 50.25 58.42 60.48 64.52
3 17.01 20.28 25.19 33.33 38.92 43.58 51.62 59.81 61.85 65.90
4 18.38 21.57 26.48 34.71 40.30 44.97 53.01 61.18 63.24 67.28
5 19.77 22.86 27.76 36.09 41.68 46.35 54.40 62.57 64.63 68.66
6 21.15 24.15 29.05 37.38 43.07 47.73 55.77 63.95 66.01 70.05
7 22.53 25.43 30.34 38.67 44.45 49.12 57.16 65.33 67.39 71.43
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 14.61 18.03 23.06 30.86 36.91 42.59 51.41 60.03 62.88 68.55
1 14.61 18.03 23.06 30.86 36.91 42.59 51.41 60.03 62.88 68.55
2 15.93 19.36 24.39 32.19 38.23 43.92 52.75 61.35 64.20 69.88
3 17.26 20.68 25.71 33.52 39.56 45.24 54.07 62.68 65.53 71.20
4 18.58 22.01 27.04 34.84 40.88 46.57 55.40 64.00 66.85 72.53
5 19.91 23.33 28.36 36.17 42.21 47.89 56.72 65.33 68.18 73.87
6 21.23 24.66 29.69 37.49 43.53 49.23 58.05 66.66 69.50 75.19
7 22.56 25.98 31.01 38.82 44.86 50.55 59.37 67.98 70.83 76.52
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 16.96 21.84 28.28 36.75 43.42 48.95 58.70 68.62 71.03 75.81
1 16.96 21.84 28.28 36.75 43.42 48.95 58.70 68.62 71.03 75.81
2 18.62 23.50 29.94 38.41 45.08 50.60 60.36 70.28 72.69 77.47
3 20.27 25.14 31.59 40.07 46.73 52.26 62.02 71.93 74.35 79.13
4 21.93 26.79 33.25 41.72 48.39 53.92 63.68 73.58 76.00 80.78
5 23.58 28.45 34.90 43.38 50.05 55.58 65.33 75.24 77.66 82.45
6 25.25 30.11 36.56 45.02 51.69 57.22 66.98 76.90 79.30 84.11
7 26.91 31.77 38.23 46.68 53.35 58.87 68.62 78.56 80.96 85.76
Custom Flashings – Galvanised 0.55mm Price GST INC $/lm
Notes:1. Additional folds add $1.15 per/lm (GST EXC) per bend.2. Lysaght Custom Flashings are sold/invoiced by finish, girth and number of bends.3. Crush and Folds = 2 bends.4. Girths not listed in table will be charged at next largest girth rate.5. Flat sheet. Longest length delivered is 2400mm. For longer lengths and girths over 800mm, please
check with your local branch re availability.6. Maximum length = 8000mm, Minimum length = 100mm, Minimum charge = 1000mm7. Above pricing refers to standard colours listed in our colour availability chart on page 6 and 7.8. Other materials may be available on request.9. An extra charge of $2.64/m (GST EXC) applies to tapered flashings.10. For ease in ordering we recommend the use of our flashing order form (available on request).
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
78
Rai
nwat
er
RRP
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 20.43 29.33 37.62 43.73 53.60 59.29 77.75 84.92 93.95 110.91
1 20.43 29.33 37.62 43.73 53.60 59.29 77.75 84.92 93.95 110.91
2 21.78 30.67 38.97 45.08 54.97 60.62 79.10 86.24 95.30 112.26
3 23.13 32.01 40.32 46.42 56.30 61.97 80.45 87.60 96.64 113.60
4 24.46 33.36 41.66 47.77 57.65 63.34 81.81 88.94 97.99 114.96
5 25.83 34.72 43.01 49.10 59.00 64.67 83.13 90.30 99.33 116.29
6 27.16 36.06 44.36 50.46 60.35 66.02 84.49 91.64 100.68 117.65
7 28.52 37.41 45.69 51.81 61.69 67.35 85.83 92.98 102.03 118.99
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 15.46 19.03 24.29 32.47 38.76 44.70 53.96 62.96 65.93 68.90
1 15.46 19.03 24.29 32.47 38.76 44.70 53.96 62.96 65.93 71.87
2 16.80 20.35 25.63 33.79 40.08 46.04 55.26 64.28 67.25 73.21
3 18.11 21.69 26.94 35.11 41.42 47.37 56.60 65.62 68.60 74.54
4 19.45 23.01 28.28 36.44 42.74 48.69 57.93 66.94 69.92 75.87
5 20.78 24.34 29.61 37.77 44.07 50.02 59.25 68.28 71.24 77.20
6 22.10 25.67 30.93 39.11 45.40 51.35 60.59 69.60 72.58 78.52
7 23.43 26.99 32.26 40.43 46.73 52.67 61.91 70.94 73.89 79.85
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 20.43 29.33 37.62 43.74 53.60 59.29 77.76 84.92 93.95 110.91
1 20.43 29.33 37.62 43.74 53.60 59.29 77.76 84.92 93.95 110.91
2 21.78 30.68 38.97 45.08 54.96 60.62 79.10 86.25 95.30 112.26
3 23.13 32.01 40.33 46.42 56.31 61.97 80.44 87.60 96.64 113.60
4 24.48 33.36 41.66 47.76 57.65 63.34 81.81 88.94 98.00 114.95
5 25.83 34.69 43.01 49.10 59.00 64.67 83.14 90.29 99.34 116.29
6 27.16 36.05 44.35 50.46 60.34 66.02 84.49 91.65 100.68 117.65
7 28.51 37.41 45.71 51.81 61.69 67.35 85.83 92.98 102.03 118.99
Custom Flashings – Hi Gloss 0.55mm Price GST INC $/lm
Custom Flashings – Metallic 0.55mm Price GST INC $/lm
Notes:1. Additional folds add $1.15 per/lm (GST EXC) per bend.2. Lysaght Custom Flashings are sold/invoiced by finish, girth and number of bends.3. Crush and Folds = 2 bends.4. Girths not listed in table will be charged at next largest girth rate.5. Flat sheet. Longest length delivered is 2400mm. For longer lengths and girths over 800mm, please
check with your local branch re availability.6. Maximum length = 8000mm, Minimum length = 100mm, Minimum charge = 1000mm7. Above pricing refers to standard colours listed in our colour availability chart on page 6 and 7.8. Other materials may be available on request.9. An extra charge of $2.64/m (GST EXC) applies to tapered flashings.10. For ease in ordering we recommend the use of our flashing order form (available on request).
Custom Flashings – Ultra 0.55mm Price GST INC $/lm
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
79
Rai
nwat
er
RRP
Custom Flashings – ZINCALUME® steel 1.2mm Price GST INC $/lm
Custom Flashings – Galvanised 1.2mm Price GST INC $/lm
Custom Flashings – Galvanised 1.6mm Price GST INC $/lm
Custom Flashings – Galvanised 1.0mm Price GST INC $/lm
Notes:1. Additional folds add $1.15 per/lm (GST EXC) per bend.2. Lysaght Custom Flashings are sold/invoiced by finish, girth and number of bends.3. Crush and Folds = 2 bends.4. Girths not listed in table will be charged at next largest girth rate.5. Flat sheet. Longest length delivered is 2400mm. For longer lengths and girths over 800mm, please check with
your local branch re availability.6. Maximum length = 8000mm (1.6mm = 4000mm), Minimum length = 100mm, Minimum charge = 1000mm7. Above pricing refers to standard colours listed in our colour availability chart on page 6 and 7.8. Other materials may be available on request.9. An extra charge of $2.64/m (GST EXC) applies to tapered flashings.10. For ease in ordering we recommend the use of our flashing order form (available on request).
Custom Flashings – ZINCALUME® steel 1.0mm Price GST INC $/lm
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 34.56 43.40 55.09 70.32 82.57 92.73 110.40 128.29 132.73 141.55
1 34.56 43.40 55.09 70.32 82.57 92.73 110.40 128.29 132.73 141.55
2 36.26 45.09 56.79 72.02 84.27 94.45 112.09 130.00 134.43 143.24
3 37.97 46.78 58.49 73.71 85.97 96.14 113.78 131.69 136.13 144.95
4 39.67 48.49 60.19 75.42 87.66 97.83 115.49 133.40 137.82 146.64
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 32.20 40.77 51.99 66.87 78.56 88.28 105.33 122.67 126.91 135.33
1 32.20 40.77 51.99 66.87 78.56 88.28 105.33 122.67 126.91 135.33
2 33.85 42.43 53.65 68.53 80.21 89.90 106.99 124.32 128.56 136.99
3 35.51 44.09 55.30 70.18 81.86 91.56 108.63 125.97 130.22 138.64
4 37.16 45.74 56.96 71.84 83.52 93.23 110.29 127.63 131.88 140.31
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 35.51 44.58 56.53 72.09 84.60 95.02 113.11 131.41 135.95 145.01
1 35.51 44.58 56.53 72.09 84.60 95.02 113.11 131.41 135.95 145.01
2 37.16 46.23 58.19 73.74 86.26 96.68 114.76 133.06 137.60 146.65
3 38.82 47.87 59.85 75.41 87.92 98.34 116.42 134.72 139.26 148.31
4 40.48 49.53 61.51 77.07 89.58 99.98 118.07 136.38 140.91 149.97
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 40.34 50.84 64.74 83.04 97.39 109.37 130.37 151.75 156.95 167.33
1 40.34 50.84 64.74 83.04 97.39 109.37 130.37 151.75 156.95 167.33
2 42.03 52.54 66.43 84.73 99.11 111.07 132.09 153.44 158.65 169.03
3 43.74 54.24 68.13 86.44 100.80 112.77 133.78 155.14 160.35 170.73
4 45.43 55.95 69.83 88.14 102.51 114.47 135.49 156.84 162.06 172.44
Folds Girth 100 200 300 400 500 600 750 900 1000 1200
0 50.25 63.05 80.01 102.33 119.87 134.44 160.08 186.16 192.50 205.15
1 50.25 63.05 80.01 102.33 119.87 134.44 160.08 186.16 192.50 205.15
2 51.80 64.60 81.57 103.90 121.42 136.00 161.63 187.72 194.05 206.71
3 53.36 66.18 83.13 105.45 122.97 137.56 163.20 189.28 195.60 208.26
4 54.91 67.72 84.68 107.00 124.53 139.11 164.75 190.83 197.16 209.83
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
81
Acc
esso
ries
RRP
Product Width (mm) Length (m)$/roll
GST EXC GST INC
Roofing Wire2mm x 300mm x 150mm
1800 50 m 280.77 308.85
Roofing Wire
Product Grams/m2$/lm
GST EXC GST INC
Custom Orb(2400 g/m2 is standard grade)
1800 (Walling only) 55.43 60.97
2400 59.99 65.99
Trimdek(2400 g/m2 is standard grade)
1800 (Walling only) 55.43 60.97
2400 59.99 65.99
3050 84.51 92.96
Spandek(2400 g/m2 is standard grade)
2400 76.41 84.05
3050 85.33 93.86
Klip-lok 406(2400 g/m2 is standard grade)
2400 59.99 65.99
Klip-lok 700 HS(2400 g/m2 is standard grade)
2400 93.68 103.05
Flatdek(2400 g/m2 is standard grade)
2400 85.21 93.73
Translucent Sheeting
Translucent Sheeting Accessories
Product Width (mm) Thickness Length$/roll
GST EXC GST INC
Lapseal
50 6mm 11.7m 75.91 83.50
75 6mm 11.7m 104.23 114.65
100 6mm 11.7m 133.54 146.89
Weatherlok Washer 32mm (Dia)$/1000
GST EXC GST INC
439.03 482.93
Notes: 1. Maximum length available is 12200mm.2. An extra charge will apply to lengths over 11000mm.3. Shortest length available 900mm.4. Available in Clear and Opal. 5. 32mm Weatherlok Washer required for all translucent sheeting.6. Additional translucent sheeting products may be available on request.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
82
Acc
esso
ries
RRP
Profile Application – Rib Fixing TypeUnpainted
$/50GST EXC GST INC
Custom Orb
Steel > 0.75 to 3.00mm BMT
Steel One-Shot® 60mm
91.44 100.58Trimdek
Greca
Profile Application – Rib Fixing TypeUnpainted
$/50GST EXC GST INC
Custom OrbSoftwood – Hardwood
Timber One-Shot® 50mm
68.07 74.88Greca
Trimdek Softwood – Hardwood
Timber One-Shot® 65mm
POA POA
Polycarbonate Sheet Fasteners – Fixing to Steel
Polycarbonate Sheet Fasteners – Fixing to Timber
Polycarbonate Sheeting
DescriptionPolycarbonate $/lm Laserlite 2000+ $/lm
GST EXC GST INC GST EXC GST INC
Greca N/A N/A 77.99 85.79
Custom Orb 59.89 65.88 77.99 85.79
Trimdek N/A N/A 77.99 85.79
Notes: 1. Polycarbonate Custom Orb is available in lengths 1800, 2400, 3000, 3600 and 4200mm. Colours: Clear, Bronze and Grey.2. Laserlite 2000+ is available in lengths 1800, 2400, 3000, 3600, 4200, 4800, 5400, 6000, 7200 and 9000mm. Colours: Bronze
Tint, Cream, Clear, Grey Tint and Opal.3. Please check with your local branch for price and availability of Laserlite 3000 (Custom Orb and Greca only).4. Greca not suitable for lapping with Spandek.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
83
Acc
esso
ries
RRP
Size Roll Size$/roll
GST EXC GST INC
Light weight Anti-glare 1.35m x 60m 81m2 420.72 462.79
Medium weight Anti-glare 1.35m x 60m 81m2 548.06 602.87
R Value / Thickness Dimensions Roll Size$/roll
GST EXC GST INC
Light weight Foil
R1.3 / 55mm 1.2m x 15m 18m2 316.39 348.03
R1.3 / 55mm 1.2m x 20m 24m2 421.74 463.91
R1.8 / 75mm 1.2m x 15m 18m2 414.81 456.29
Medium weight Foil
R1.3 / 55mm 1.2m x 15m 18m2 348.36 383.20
R1.3 / 55mm 1.2m x 20m 24m2 464.44 510.88
R1.8 / 75mm 1.2m x 15m 18m2 449.77 494.75
Heavy weight Foil
R1.3 / 55mm 1.2m x 15m 18m2 436.59 480.25
R1.3 / 55mm 1.2m x 20m 24m2 582.14 640.35
R1.8 / 75mm 1.2m x 15m 18m2 535.37 588.91
Building Blanket with Foil
Tapes
Product Size$/ea
GST EXC GST INC
Reinforced Foil Tape 48mm wide 95.40 104.94
Throat sizeMill Finish $/ea Colour $/ea
GST EXC GST INC GST EXC GST INC
500 574.05 631.46 813.02 894.32
Throat sizeMill Finish $/ea Colour $/ea
GST EXC GST INC GST EXC GST INC
300 211.31 232.44 230.53 253.58
Industrial Ventilators
Domestic Ventilators
Reflective Foil Laminate
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
84
Acc
esso
ries
RRP
DiameterBlack $/ea Grey $/ea
GST EXC GST INC GST EXC GST INC
0mm – 35mm 15.11 16.62 17.54 19.29
5mm – 55mm 15.95 17.55 18.96 20.86
50mm – 70mm 20.14 22.15 24.67 27.14
5mm – 120mm 28.84 31.72 33.11 36.42
110mm – 170mm 34.69 38.16 42.67 46.94
160mm – 220mm 62.66 68.93 72.31 79.54
160mm – 300mm 83.22 91.54 96.53 106.18
290mm – 440mm 140.53 154.58 154.82 170.30
Dektite Pipe Flashing
Profile Description$/ea
GST EXC GST INC
TrimdekTurn Up/Turn Down 120.32 132.35
Speednotcher 753.44 828.78
SpandekTurn Up 120.32 132.35
Speednotcher 753.44 828.78
Klip-Lok 406
Turn Up 135.88 149.47
Turn Down 98.76 108.64
Speednotcher 753.44 828.78
Klip-Lok 700 HS
Turn Up 115.61 127.17
Turn Down 115.61 127.17
Speednotcher 753.44 828.78
Longline 305
Turn Up/Turn Down 120.44 132.48
Rib Closer 938.18 1032.00
Button Punch 1044.73 1149.20
Tools
Product Description$/ea
GST EXC GST INC
Touch Up Paint 100ml (brush tin) 14.96 16.46
Silicone Sealant Grey or Clear 17.52 19.27
Paints and Sealants
Notes: 1. The Pipe Flashing size depends on the variation in roof pitch. 2. Other Dektite pipe flashings subject to availability.
Notes: 1. Tools are not returnable.
Type Diameter Colour$/ea
GST EXC GST INC
Retrofit FL801 20 – 70mmBlack 34.94 38.43
Grey 40.37 44.41
Retrofit FL802 50 – 185mmBlack 68.05 74.86
Grey 74.89 82.38
Retrofit FL803 85 – 255mmBlack 98.34 108.17
Grey 108.19 119.01
Dektite Flashing
Notes: 1. Contact your local branch for availability of other paints and sealants.2. BlueScope Lysaght does not recommend the use of touch-up paint.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
85
Acc
esso
ries
RRP
Profile Product Top & Bottom$/ea
GST EXC GST INC
Custom Orb 915mm 6.27 6.90
(Bottom profile shown)Trimdek 915mm 6.27 6.90
Spandek 745mm 6.48 7.13
(Bottom profile shown)
Klip-Lok 406 810mm 6.87 7.56
(Bottom profile shown)
Klip-Lok 700 HS 710mm 6.87 7.56
Roof Infill Strips (Eaves & Ridge closure)
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
86
Acc
esso
ries
RRP
Fixing to Steel Unpainted Head Painted Head
Type$/100 $/500 $/1000 $/100 $/500 $/1000
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
SH1220N Metal Teks Hex Head
32.79 36.07 131.30 144.43 N/A N/A N/A N/A N/A N/A N/A N/A
RZ650 Roof Zip 43.04 47.34 N/A N/A 364.88 401.37 51.19 56.31 N/A N/A 446.57 491.23
SH1016 Metal Teks Hex Head
25.88 28.47 N/A N/A 193.55 212.91 34.04 37.44 N/A N/A 275.24 302.76
SW1016N Metal Wafer Head
21.30 23.43 N/A N/A 147.74 162.51 N/A N/A N/A N/A N/A N/A
SW1022N Metal Wafer Head
22.26 24.49 N/A N/A 202.32 222.55 N/A N/A N/A N/A N/A N/A
TW1025N Type 17 Wafer Head
33.13 36.44 N/A N/A 331.27 364.40 N/A N/A N/A N/A N/A N/A
SH1016N Metal Teks Hex Head
20.21 22.23 N/A N/A 136.63 150.29 28.38 31.22 N/A N/A 218.33 240.16
SH1220 Metal Teks Hex Head
40.68 44.75 170.69 187.76 N/A N/A 48.86 53.75 210.35 231.39 N/A N/A
AT5539 AutoTek N/A N/A N/A N/A 345.87 380.46 N/A N/A N/A N/A 419.47 461.42
AT5550 AutoTek 41.24 45.36 N/A N/A 346.64 381.30 49.41 54.35 N/A N/A 428.32 471.15
BZ5540N Batten Zip 30.86 33.95 N/A N/A 239.87 263.86 N/A N/A N/A N/A N/A N/A
SH1230N Metal Teks Hex Head
40.19 44.21 N/A N/A 336.67 370.34 N/A N/A N/A N/A N/A N/A
R825 Ripple Zip 39.29 43.22 N/A N/A 322.19 354.41 46.81 51.49 N/A N/A 397.39 437.13
Rivets
Self-drilling fasteners – Suitable for ZINCALUME® steel and COLORBOND® steel
U Fix Rivets (Blind Rivet)$/100
GST EXC GST INC
Aluminium 3.2mm diameter Plain 21.60 23.76
Aluminium 3.2mm diameter Coloured 22.62 24.88
Notes: 1. Not all fasteners are kept in stock. Please confirm availability at time of order placement.2. Other fasteners may be available on request.3. A suffix of ‘N’ indicates the fastener is without a seal.
S = Steel, T = Timber, H = Hex Head, P = Ripple, RZ = Roof Zips, W = Wafer Head, N = No Seal
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
87
Acc
esso
ries
RRP
Self-drilling fasteners – Suitable for ZINCALUME® steel and COLORBOND® steel
Notes: 1. Not all fasteners are kept in stock. Please confirm availability at time of order placement.2. Other fasteners may be available on request.3. A suffix of ‘N’ indicates the fastener is without a seal.
Fixing to Timber Unpainted Head Painted Head
Type$/100 $/1000 $/100 $/1000
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
TH1225 Type 17 Hex Head
36.04 39.64147.10 per 500
161.81 per 500
44.22 48.64188.48 per 500
207.33 per 500
TH1250 Type 17 HG Hex Head
35.73 39.30 291.80 320.98 43.90 48.29 373.50 410.85
RZ650 Roof Zip 43.04 47.34 364.88 401.37 51.19 56.31 446.57 491.23
RZ665 Roof Zip 49.69 54.66 428.88 471.77 58.05 63.86 514.65 566.12
TW1025N Type 17 Wafer Head
33.13 36.44 331.27 364.40 N/A N/A N/A N/A
BZ5540N Batten Zip 30.86 33.95 239.87 263.86 N/A N/A N/A N/A
RZ625 Roof Zip with Seal
36.49 40.14140.90 per 500
154.99 per 500
44.82 49.30190.64 per 500
209.70 per 500
TH1225N Type 17 Hex Head
35.90 39.49143.38 per 500
157.72 per 500
N/A N/A N/A N/A
R825 Ripple Zip 39.29 43.22 322.19 354.41 46.81 51.49 397.39 437.13
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
89
Stru
ctur
al
RRP
Notes:
1. Prices shown are for purlins punched with holes suitable for typical connections to cleats, bridging and lapping. Additional charges for non standard and extra holes may apply. Please contact your local branch for further information.
2. Small quantities of C & Z 300 & 350 (Big C’s and Z’s) purlins are subject to enquiry and extended lead times.
3. Standard coating supplied is Z350 Galvanized.
4. Tolerances: Length +/- 5mm.
5. Check with your local branch for price and availability for other purlin depths, profiles and materials.
6. Downturn lip purlins subject to enquiry.
7. SupaPurlin design software available, commercial arrangements apply – POA.
8. Fourteen sets of holes over 6000mm subject to enquiry.
Packing
LYSAGHT® purlins are delivered to site in strapped bundles. The actual quantity in each bundle will vary with section size, order and length. The bundle mass is generally one tonne maximum.
Ordering
To make ordering of purlins, bridging and accessories easier, standard order form pads are available from your local branch.
Purlin Product Range
Purlin ProfilesDepth(mm)
ThicknessBMT (mm)
lineal m/tonne
Masskg/m
$/lm (Standard hole punching only)
GST EXC GST INC
Traditional Z&C C10010
102
1.0 566 1.77 20.16 22.18
Z/C10012 1.2 475 2.10 22.12 24.33
Z/C10015 1.5 383 2.61 24.35 26.79
Z/C10019 1.9 304 3.29 30.11 33.12
Lysaght SupaZed®
Other purlin profiles subject to enquiry
Lysaght SupaCee®
SZ/SC15012
152
1.2 346 2.89 28.87 31.76
SZ/SC15015 1.5 279 3.58 30.44 33.48
SZ/SC15019 1.9 222 4.51 37.86 41.65
SZ/SC15024 2.4 176 5.67 46.33 50.96
SZ/SC20012
203
1.2 276 3.62 33.72 37.09
SZ/SC20015 1.5 223 4.49 36.12 39.73
SZ/SC20019 1.9 174 5.73 45.17 49.69
SZ/SC20024 2.4 139 7.20 55.17 60.69
SZ/SC25015
254
1.5 194 5.16 49.13 54.04
SZ/SC25019 1.9 154 6.50 51.91 57.10
SZ/SC25024 2.4 125 8.16 64.10 70.51
SZ/SC30019
300
1.9 124 8.02 102.82 113.10
SZ/SC30024 2.4 99 10.09 107.80 118.58
SZ/SC30030 3.0 80 12.56 148.47 163.32
SZ/SC35024350
2.4 82 12.20 POA POA
SZ/SC35030 3.0 66 15.19 POA POA
Fascia PurlinDescription Mass kg/m BMT mm $/lm (Standard hole punching only)
GST EXC GST INC
Fascia Purlin 230mm deep 6.50 1.9 99.30 109.23
Maximum length: 18000mm. Minimum length: 1830mm.
Notes: 1. Subject to extended lead times.2. Please specify roof pitch between 0 – 25 degrees when ordering.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
90
Stru
ctur
al
RRP
Hooklok II Purlin Bridging
Profile Description Type$/m
GST EXC GST INC
Standard bridging (fixed length)
Fixed channel length With Locator Bracket, Clamp Bracket or Bolt Bracket fixed to both ends
100
30.95 34.05150
200
250
Fascia Bridging (Adjustable length)
Adjustable channel length. With Locator Bracket, Clamp Bracket or Bolt Bracket fixed to one end. With Fascia bracket loosely fitted to other end with a bolt.
100
71.81 78.99150
200
250
Adjustable Bridging (Adjustable length)
Adjustable channel length. With Locator Bracket, Clamp Bracket or Bolt Bracket fixed to both ends.
100
71.81 78.99150
200
250
Expansion Joint Bridging (Adjustable length)
Also used as “pivot” bridging, ridge tie. Fixed channel length. With Locator Bracket, Clamp Bracket or Bolt Bracket loosely fitted to both ends with a bolt.
100
71.81 78.99150
200
250
Ridge Tie (Adjustable length)
Turnbuckle in-lieu of channel. With Locator Bracket, Clamp Bracket or Bolt Bracket loosely fitted to both ends with a bolt. For longer lengths a channel is bolted to the turnbuckle.
100
301.10 331.21150
200
250
Tie Rod (Adjustable length)
Used as ridge tie. Fitted with 2 flanged nuts each end.
12mm(M12)
40.24 44.26
Girt Hanger (Adjustable length)
Turnbuckle in-lieu of channel. With Locator Bracket, Clamp Bracket or Bolt Bracket loosely fitted to one end. For longer lengths a channel is bolted to the turnbuckle and the bracket is fixed to the channel end.
100
174.94 192.43150
200
250
Girt foot (Adjustable length)
Fixed channel length. With Locator Bracket, Clamp Bracket or Bolt Bracket fixed to one end. With Girt Bracket loosely fitted to other end with a bolt.
100
174.94 192.43150
200
250
Notes: 1. Minimum and maximum lengths apply to bridging. Contact your local branch for details.2. Where brackets are FIXED to channels they are securely fixed with CLINCHES, otherwise the brackets are
loosely fitted with a bolt.3. Bridging is delivered in strapped or wired bundles as appropriate.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
91
Stru
ctur
al
RRP
Profile Description Type$/m
GST EXC GST INC
Standard bridging (Fixed length)
Fixed channel length.With Bolt Bracket fixed to both ends with bolts
300 139.65 153.62
350 139.65 153.62
Fascia Bridging (Fixed length)
Fixed channel length.With Bolt Bracket fixed to both endswith bolts. Bolt bracket fixed at thenominated roof angle at one end.
300 POA POA
350 POA POA
Ridge Bridging (Fixed length)
Fixed channel length.With Bolt Bracket fixed to both endswith bolts. Bolt bracket fixed at thenominated roof angle at both ends
300 POA POA
350 POA POA
Tie Rod (Adjustable length)
Used as ridge tie.Fitted with 2 flanged nuts each end
16mm(M16)
65.36 71.90
Notes: 1. Minimum and maximum lengths apply to bridging. Contact your local branch for details.2. Bridging is delivered in strapped or wired bundles as appropriate.
Series 300/350 Purlin Bridging
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
92
Stru
ctur
al
RRP
Purlin Accessories
Description Size Per$
GST EXC GST INC
Clamp Plate
100
each 9.44 10.38150
200
250
Angle Connector(100 AC shown, differentsizes available)
100
each 10.65 11.72150
200
250
300 each 12.81 14.09
Raking Girt Bracket 100 each 12.42 13.66
General Purpose Bracket
100
each 12.42 13.66150
200
250
300 each 24.53 26.98
Single Cleats Uncoated(for use with Z Purlins, forcontinuous & lap connections)
100 each 16.52 18.17
150 each 19.28 21.21
200 each 22.00 24.20
Double Cleats Uncoated(mostly for C Purlins, forbutting connections)
100 each 18.27 20.10
150 each 24.79 27.27
200 each 30.76 33.84
Handy C Cleat each 3.42 3.76
Purlin Fascia Bolt M12 x 30 100 270.65 297.72
Purlin Bolts & Nuts(flanged)
M12 x 30mm Standard 100 153.76 169.14
M12 x 30mm High Strength
100 235.64 259.20
M16 x 45mm Standard 100 505.24 555.76
Notes: Accessories are delivered in strapped or wired bundles, bags or packages as appropriate.
Fascia Purlin
Description Mass kg/m BMT mm$/lm
Standard hole punching only)
GST EXC GST INC
Fascia Purlin 230mm deep 6.50 1.9 99.30 109.23
Notes: 1. Subject to extended lead times.2. Please specify roof pitch between 0 – 25 degrees when ordering.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
93
Stru
ctur
al
RRP
Interlok II Grating
Interlok II Grating Stair Treads
Stair tread type Nominal Length (mm)$/ea
GST EXC GST INC
Heavy Duty2.0mm
610 271.58 298.74
765 301.84 332.02
915 341.19 375.31
1220 386.55 425.21
Extra Heavy Duty2mm
610 422.22 464.44
765 461.57 507.73
915 494.87 544.36
1220 567.26 623.99
Double Male Profile
Stock lengths: 6075mm
Male/Female Profile
Product Gauge mmGalvanised $/lm
GST EXC GST INC
GO6512 Standard length 1.2 45.06 49.57
GO6512 Non-standard length 1.2 47.75 52.53
GO6520 Standard length 2.0 74.05 81.46
GO6520 Non-standard length 2.0 78.47 86.32
Notes: 1. Custom lengths are subject to enquiry. Contact your local branch for available lengths.2. Maximum length = 10800mm. Minimum length: 497m. Under 6075mm will incur a cutting charge per length.3. When ordering please specify regular or anti-skid finish and male/female or double male profile.4. Nominal width = 225mm.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
94
Stru
ctur
al
RRP
Interlok II Accessories
Description Length (mm) Per$
GST EXC GST INC
Heel/Toe Side Plates 3100 metre 55.85 61.44
Heel/Toe End Plates 3100 metre 55.85 61.44
Carrier Plate each 13.46 14.81
End Plate each 14.36 15.80
Splice Plate each 18.17 19.99
Hold Down Clip each 11.19 12.31
Heel Toe End Plate Bracket
each 8.42 9.26
J Bolt/Nut/washer 100 218.68 240.55
Hex. Head Nuts & Bolts
M6 x 20 each 0.90 0.99
Filler Panel 3100 metre 76.19 83.81
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
95
Stru
ctur
al
RRP
Gauge mmMass kg/m2
(Galvanised)Galvanised $/m2 Brite White $/m2
GST EXC GST INC GST EXC GST INC
0.60 BMT 8.52 72.45 79.70 N/A N/A
0.75 BMT 10.50 78.44 86.28 N/A N/A
1.00 BMT 13.79 95.15 104.67 149.57 164.53
Bondek
Notes: 1. Longer lengths are subject to enquiry with your local branch.2. Bondek Brite White painted underside with protective plastic covering. Please contact your local branch for further information.3. Tolerance length: +0, -10mm.4. Cutting charges apply to lengths under 1200mm and may be subject to a longer lead time.5. Lengths over 12,000mm and/or orders over 5T require a crane onsite to unload.
Maximum length: 17000mm. Minimum length: 1200mm.
Slab Depth $/m
BMT100-145mm 150-175mm 180-210mm
GST EXC GST INC GST EXC GST INC GST EXC GST INC
1.0 mm 53.17 58.49 POA POA POA POA
1.2 mm POA POA 61.94 68.13 POA POA
1.6 mm POA POA POA POA 95.86 105.45
Note:1. Edgeform can be custom made to slab height (refer to custom flashings on pages 77 for pricing)
Maximum lengths: 1mm = 8000mm, 1.2mm = 8000mm and 1.6 = 4000mm.
Edgeform
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
96
Stru
ctur
al
RRP
Product Per$
GST EXC GST INC
Bon-Nut 6mm thread Box/50 188.78 207.66
Bon-Nut 8mm thread Box/50 188.78 207.66
Bon-Nut 10mm thread Box/50 188.78 207.66
Bon-Nut 12mm thread Box/50 188.78 207.66
Bonwedge Each 1.93 2.12
Bonfill-PolystyreneFiller Strip1200mm
Each 5.95 6.55
Bonstrip 3000mm (white) l/m 6.71 7.38
Polyethylene Rib Plug(Grey) 20mm
Each 1.84 2.02
Bondek Foam Tape10mm x 7.6m (roll)
Each 12.66 13.93
Bondek PT Hold Down Clip(For use in prestressed slabs only)
Each 0.90 0.99
W-Dek End Capping (Steel)
Each 10.35 11.39
Formwork Accessories
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
97
Stru
ctur
al
RRP
Notes: 1. Available in lengths of 6m only.2. Refer to your local branch for availability lead times.
Cold-formed sections
AnglesProduct Code Size BMT Kg/m
Uncoated $/m ZINCFORM® $/m
GST EXC GST INC GST EXC GST INC
LA 4630 46 x 35 3.0 1.79 16.56 18.22 18.17 19.99
LA 5130 51 x 30 3.0 1.79 16.56 18.22 18.17 19.99
Plain Channels LC 05130 51 x 25 3.0 2.15 17.78 19.56 20.47 22.52
LC 07630 76 x 38 3.0 3.34 27.34 30.07 31.47 34.62
LC 08330 83 x 34 3.0 3.34 27.34 30.07 31.47 34.62
LC 08930 89 x 31 3.0 3.34 27.34 30.07 31.47 34.62
LC 09530 95 x 37 3.0 3.70 30.27 33.30 38.26 42.09
LC 10330 103 x 34 3.0 3.70 30.27 33.30 38.26 42.09
LC 10230 102 x 55 3.0 4.77 39.01 42.91 44.91 49.40
LC 12730 127 x 50 3.0 5.24 41.42 45.56 49.33 54.26
LC 15230 152 x 51 3.0 5.84 45.09 49.60 54.99 60.49
Lipped Channels LL 06425 64 x 38 2.5 2.89 23.63 25.99 27.20 29.92
LL 10225 102 x 51 2.5 4.38 35.81 39.39 41.22 45.34
LL 10230 102 x 51 3.0 5.24 41.42 45.56 49.35 54.29
LL 12725 127 x 51 2.5 4.88 39.91 43.90 45.93 50.52
LL 12730 127 x 51 3.0 5.84 45.09 49.60 54.99 60.49
LL 15230 152 x 64 3.0 7.15 55.20 60.72 67.31 74.04
LL 20330 203 x 76 3.0 9.06 69.95 76.95 85.30 93.83
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
99
Ho
use
Fram
ing
RRP
Profile Product Size (mm) BMT (mm)Standard
Lengths (mm)$/Im
GST EXC GST INC
Standard Stud75 x 32 1.2 7500 8.35 9.19
75 x 32 1.0 7500 6.82 7.50
Punched Stud75 x 32 1.2 7500 8.35 9.19
75 x 32 1.0 7500 6.82 7.50
Standard Nogging72 x 34 1.2 7500 8.35 9.19
72 x 34 1.0 7500 6.82 7.50
Punched Nogging72 x 34 1.2 7500 8.35 9.19
72 x 34 1.0 7500 6.82 7.50
Punched Plate 78 x 31 1.0 7500 6.82 7.50
Unpunched Plate 78 x 31 1.0 7500 6.82 7.50
Punched Plate 78 x 31 1.2 7500 8.35 9.19
Unpunched Plate 78 x 31 1.2 7500 8.35 9.19
Junction Stud 75 x 38 x 32 1.2 7500 16.56 18.22
Corner Stud 75 x 38 1.2 7500 14.23 15.65
Truss Chord Galvanised 100 x 53/49 1.0 Non-Standard 12.92 14.21
Tensioner Set
(Boxes of 100 only)
$/100
GST EXC GST INC
313.59 344.95
SBF Brick Ties Galvanised
$/box 100GST EXC GST INC
34.27 37.70
Steel Building Frame Components
Notes: 1. Non-Standard SBF by enquiry only: Minimum quantities apply. Extended lead times apply.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
100
Ho
use
Fram
ing
RRP
Profile Product BMT Section Lengths Pk Size$/m
GST EXC GST INC
Boxed Stud
0.48 70 x 38 2408, 2443, 2708, 2743, 7500 50 6.45 7.10
0.48 75 x 38 2408, 2443, 2708, 2743, 7500 50 6.79 7.47
0.48 90 x 38 2408, 2443, 2708, 2743, 7500 40 7.66 8.43
Open Stud0.55 75 x 38 2408, 2443, 2708, 2743, 7500 60 5.03 5.53
0.75 75 x 38 Made to order 60 6.48 7.13
Plate
0.75 70 x 35 7500 50 5.47 6.02
0.75 70 x 65 7500 50 7.67 8.44
1.0 70 x 65 7500 50 9.83 10.81
0.75 75 x 35 7500 50 5.63 6.19
0.75 75 x 65 7500 50 7.65 8.42
1.0 75 x 65 7500 50 9.92 10.91
0.75 90 x 35 7500 50 6.68 7.35
1.0 90 x 65 7500 50 11.44 12.58
Supraframe Angle Lintel
1.0 200 x 35 6000 25 10.77 11.85
1.5 200 x 35 6000 25 16.03 17.63
Supraframe Nogging
0.48 20 x 22 6100 20 1.78 1.96
Trimmer Angle 1.00 35 x 35 4800, 5800 40 3.36 3.70
Brick Ties (Gal) 500158.46 per 500
174.31 per 500
Nogging Clip 9000.47 /ea
0.52 /ea
Grommets – Plumbing & Electrical 2000285.75
per 2000314.33
per 2000
Flat Washer – 32mm diameter (ea) 5000.46 ea
0.51 ea
Supraframe Components
Notes: 1. All standard Supraframe Boxed and Open studs are only available in their relevant pack sizes. For Boxed Stud, allow an extra
5 working days for delivery of non-standard lengths and non stock items. For Open Stud, allow an extra 10 working days for delivery of non-standard lengths and non stock items. Minimum length = 1800mm. Maximum length = 7500mm. All Supraframe studs supplied punched.
2. Non-standard length Supraframe plates are only available in their relevant pack size. Allow an extra 10 working days for delivery of non-standard lengths and non stock items. Minimum length = 1800mm. Maximum length =7500mm. All Supraframe plates supplied punched. Unpunched Supraframe plates are a non-stock item and are only available in their relevant pack size.
3. Supratruss webs are only available in their relevant pack size. Allow an extra 10 working days for delivery of non stock items. Minimum length = 1800mm. Maximum length = 6100mm.
4. Non-standard length Supratruss chords are only available in their relevant pack size. Allow an extra 10 working days for delivery of non-standard lengths. Minimum length = 1800mm. Maximum length = 7500mm.
5. All Boxed Rafters are supplied unpunched. Non-standard length Boxed Rafters are only available in their relevant pack sizes. Allow an extra 5 working days for delivery of non-standard lengths or non-stock items. Minimum length = 1800mm. Maximum length = 7500mm.
6. Minimum order size is 1 bundle of 1 length.7. Lead time on non standard lengths is 10 working days.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
101
Ho
use
Fram
ing
RRP
Profile Product BMT Section Lengths Pk Size$/m
GST EXC GST INC
Supratruss Chord 0.60 75 x 38 7500 50 7.27 8.00
Boxed Rafter 0.48 75 x 38 7500 50 6.97 7.67
Universal Bracket 70 100
$/EachGST EXC GST INC
POA POA
Universal Bracket 140 40
$/EachGST EXC GST INC
POA POA
Supratruss Components
Notes: Minimum order size is 1 bundle of each length. *Non-standard lengths: 1800mm Minimum, 7500mm Maximum.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
102
Ho
use
Fram
ing
RRP
Profile Product BMTStock lengths
mm$/lm
GST EXC GST INC
Topspan 22 Ceiling Batten®
0.42 6100 2.56 2.82
Topspan 40 Roof Batten
0.55 7500 6.71 7.38
Topspan 50 Roof Batten
0.75 7500 9.10 10.01
Topspan 61 Garage Batten
0.75 7500 10.68 11.75
1.00 7500 13.47 14.82
Topspan 120
0.70 Custom cut 18.42 20.26
0.90 Custom cut 21.88 24.07
1.00 Custom cut 23.95 26.35
Light Steel Sections – Topspan
Notes: 1. Check with your local branch for stock length availability.2. Minimum length for Topspan 120 is 1800mm and maximum length is 12000mm.3. Minimum length for Topspan 61 is 300mm and maximum length is 9200mm.4. Topspan 120 1.00 BMT recommended for flooring applications only.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
103
Ho
use
Fram
ing
RRP
Quika-Floor System & Accessories Profile
LYSAGHT QUIKA-FLOOR® is the ideal engineered flooring system for domestic and light commercial construction. UNI-PIER® steel columns combine with steel floor bearers and joists to provide a cost effective floor framing system that’s easy to construct.
Contact your local branch, supply a clear set of your plans and let BlueScope Lysaght solve your challenge with a comprehensive quote that includes UNI-PIER® steel columns, bearers, joists, any accessories, delivery to site and certification.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
105
Imp
rove
men
ts
RRP
Product Length mm$/ea
GST EXC GST INC
Foam Strip for receiver channel (50mm H x 20mm W)
2000 12.16 13.38
Product Length mm$/ea
GST EXC GST INC
Profile Foam Infill (50mm H x 20mm W)
260 4.78 5.26
Receiver Channel – Flatdek
Roof Infill Strip – Flatdek
Foam Strip – Flatdek
Notes: 4 fasteners per m2 (Estimate for non-cyclonic area)
To convert price to lineal metres multiply by 0.250
Flatdek
Maximum length = 9000mm, Minimum length = 450mm Notes: 1. Longer lengths than listed may be available on application and should be confirmed by the designer.2. Contact your local branch for price and availability of colours not shown as available on page 7 of this price list.3. Tolerance on sheet lengths +0-15mm, width +2 -2mm
Product Length mm$/Im
GST EXC GST INC
Flatdek Receiver Channel 1mm 6100 18.28 20.11
Application TypeUnpainted
$/1000Painted$/1000
Unpainted $/100
Painted $/100
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
Steel up to 3.0mm BMT
SH1016 Metal Hex Head
193.55 212.91 275.24 302.76 25.88 28.47 34.04 37.44
Fasteners – Flatdek
Minimum recommendedroof pitch = 2˚ (1 in 30)
Finish BMT mm$/m2
GST EXC GST INC
COLORBOND® steel Double-Sided
Hi-Gloss 80% – (Underside)COLORBOND
® steel XRW – (Topside)0.42 56.42 62.06
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
106
Imp
rove
men
ts
RRP
Product Width (mm) Length$/roll $/1000
GST EXC GST INC GST EXC GST INC
Lapseal
50mm x 6mm 11.7m 75.91 83.50 N/A N/A
75mm x 6mm 11.7m 104.23 114.65 N/A N/A
100mm x 6mm 11.7m 133.54 146.89 N/A N/A
Weatherlok Washer
(Fibreglass only)32mm (Dia) N/A N/A 439.03 482.93
Translucent Sheeting – Flatdek
Maximum length = 12200mm, Minimum length = 900mm Notes: 1. An extra charge will apply to lengths over 11000mm.2. Available in Clear and Opal. 3 . 32mm Weatherlok Washer required for all translucent sheeting.4. Please refer to page 81 for other products in the Translucent Sheeting range.
Translucent Sheeting Accessories
Product Grams/m2 $/ImGST EXC GST INC
Fibreglass 2400 85.21 93.73
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
107
Imp
rove
men
ts
RRP
Maximum length = 9000mm, Minimum length = 1200mm Notes: 1. Standard lengths are 4m, 5m, 6.1m and 7.5m. Lengths over 9m are subject to inquiry.
2. Not all standard lengths are stocked at every branch.
Product Size mmCOLORBOND® steel
$/lm
ZINCALUME® steel
$/lmGST EXC GST INC GST EXC GST INC
100 (Standard lengths) 100 x 1.1 22.58 24.84 22.46 24.71
100 (Custom cut) 100 x 1.1 26.40 29.04 26.24 28.86
150 (Standard lengths) 150 x 1.5 32.34 35.57 32.16 35.38
150 (Custom cut) 150 x 1.5 38.41 42.25 38.20 42.02
200 (Standard lengths) 200 x 2.0 45.85 50.44 45.59 50.15
200 (Custom cut) 200 x 2.0 54.42 59.86 54.13 59.54
Firmlok Beams
15 22.5
Product Size mmPainted $/ea Unpainted $/ea
GST EXC GST INC GST EXC GST INC
Universal Bracket
100mm – 0º to 5º 9.83 10.81 7.98 8.78
100mm – 15º 11.50 12.65 9.74 10.71
100mm – 22.5º 11.78 12.96 10.19 11.21
150mm – 0º to 5º 10.77 11.85 9.01 9.91
150mm – 15º 13.65 15.02 12.25 13.48
150mm – 22.5º 14.35 15.79 12.94 14.23
200mm – 0º to 5º 11.50 12.65 9.93 10.92
200mm – 15º 15.77 17.35 14.54 15.99
200mm – 22.5º 16.82 18.50 16.48 18.13
Apex Bracket
100mm – 15º N/A N/A 26.67 29.34
100mm – 22.5º N/A N/A 29.52 32.47
150mm – 15º N/A N/A 30.38 33.42
150mm – 22.5º N/A N/A 33.73 37.10
200mm – 15º N/A N/A 34.14 37.55
200mm – 22.5º N/A N/A 36.40 40.04
Collar Tie Bracket
100mm – 15˚ 38.07 41.88 POA POA
100mm – 22.5º 43.33 47.66 POA POA
150mm – 15º 51.51 56.66 POA POA
150mm – 22.5˚ 72.53 79.78 POA POA
Suspension Bracket
100mm – 0º to 5º 18.12 19.93 16.94 18.63
150mm – 0º to 5º 18.95 20.85 18.04 19.84
200mm – 0º to 5º 20.90 22.99 19.17 21.09
Universal 140 Bracket N/A N/A POA POA
Firmlok Accessories
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
108
Imp
rove
men
ts
RRP
ProductPainted $/ea
GST EXC GST INC
Post Foot for Fluted Patio Post 37.54 41.29
Post Top Insert
Galvanised $/ea
GST EXC GST INC
6.39 7.03
Product Size (mm) BMT (mm)Standard Lengths
(mm)$/Im
GST EXC GST INC
Standard Stud75 x 32 1.2 7500 8.35 9.19
75 x 32 1.0 7500 6.82 7.50
Length mmPainted $/ea
GST EXC GST INC
2400 103.29 113.62
3000 129.07 141.98
Accessories
Decorative Fluted Patio Post
Notes: Please refer to your local branch for their range of Home Improvement accessories.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
109
Imp
rove
men
ts
RRP
Home Improvements Posts
Product Size mmUnpainted $/ea Painted $/ea
GST EXC GST INC GST EXC GST INC
Notched Posts 2.0mm (Steel) 75 x 75 x 3000 POA POA POA POA
75 x 75 x 4000 POA POA POA POA
90 x 90 x 3000 POA POA POA POA
90 x 90 x 4000 POA POA POA POA
Notched Posts 2.2mm (Aluminium) 75 x 75 x 3000 POA POA POA POA
75 x 75 x 4000 POA POA POA POA
90 x 90 x 3000 POA POA POA POA
90 x 90 x 4000 POA POA POA POA
Home Improvements Post Accessories
Product Size mmUnpainted $/ea Painted $/ea
GST EXC GST INC GST EXC GST INC
Internal Post Feet (Aluminium)
75 x 75 POA POA N/A N/A
90 x 90 POA POA N/A N/A
Post Bracket Plate (Steel)75 x 150 POA POA POA POA
75 x 200 POA POA POA POA
90 x 150 POA POA POA POA
90 x 200 POA POA POA POA
Notes: 1. Notching available to suit either 150mm and 200mm (please specify on your order).
2. Available in Hi Gloss Thredbo White, Hi Gloss Classic Cream and Hi Gloss Paperbark.
3. Other powder coated colours may be available. Please check with your local branch regarding price and availability.
Notes: 1. Available in Hi Gloss Thredbo White, Hi Gloss Classic Cream and Hi Gloss Paperbark.
2. Other powder coated colours may be available. Please check with your local branch regarding price and availability.
• LYSAGHT NEETASCREEN® / LYSAGHT SMARTASCREEN® Panel Pricing
• LYSAGHT NEETASCREEN® Plus / LYSAGHT SMARTASCREENPlus® Panel Pricing
• LYSAGHT NEETASCREEN® Fencing Components
• LYSAGHT NEETASCREEN® / LYSAGHT NEETASCREEN® Plus Gate Kits
• LYSAGHT SMARTASCREEN Fencing Components
• LYSAGHT SMARTASCREEN® / LYSAGHT SMARTASCREEN® Plus Gate Kits
• LYSAGHT MINISCREEN® Panel Pricing
• LYSAGHT MINISCREEN® Fencing Components
• LYSAGHT MINISCREEN® / LYSAGHT MINISCREEN® Plus Gate Kits
• Fencing Accessories
• Gate Accessories
Fencing Products NSW/ACT Price list
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
111
Fenc
ing
RRP
Product Quantity$/ea $/subtotal
GST EXC GST INC GST EXC GST INC
Lysaght Fence Post – 2100mm 2 18.14 19.95 36.29 39.90
Lysaght Universal Rail – 2350mm 2 20.30 22.33 40.61 44.65
Fencing Infill Sheet – 1490mm 3 34.80 38.28 104.40 114.84
Self Drilling Fasteners SHS 1016N 17 0.22 0.24 3.71 4.08
Lysaght Post Cap 1 1.61 1.77 1.61 1.77
Total price per 2350mm wide panel 186.62 205.24
Product Quantity$/ea $/subtotal
GST EXC GST INC GST EXC GST INC
Lysaght Fence Post – 2400mm 2 20.74 22.80 41.47 45.60
Lysaght Universal Rail – 2350mm 2 20.30 22.33 40.61 44.65
Fencing Infill Sheet – 1790mm 3 41.51 45.66 124.53 136.98
Self Drilling Fasteners SHS 1016N 17 0.22 0.24 3.71 4.08
Lysaght Post Cap 1 1.61 1.77 1.61 1.77
Total price per 2350mm wide panel 211.93 233.08
Product Quantity$/ea $/subtotal
GST EXC GST INC GST EXC GST INC
Lysaght Fence Post – 2700mm 2 23.33 25.65 46.66 51.30
Lysaght Universal Rail – 2350mm 2 20.30 22.33 40.61 44.65
Fencing Infill Sheet – 2090mm 3 49.36 54.30 148.08 162.90
Self Drilling Fasteners SHS 1016N 17 0.22 0.24 3.71 4.08
Lysaght Post Cap 1 1.61 1.77 1.61 1.77
Total price per 2350mm wide panel 240.67 264.70
Neetascreen/Smartascreen – COLORBOND® steel Panel Pricing (1500mm high)
Neetascreen/Smartascreen – COLORBOND® steel Panel Pricing (1800mm high)
Neetascreen/Smartascreen – COLORBOND® steel Panel Pricing (2100mm high)
Notes: 1. Panel pricing is indicative only. Actual panel prices vary depending on individual product discounts.2. Panel prices are based on post hole depth of 600mm.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
112
Fenc
ing
RRP
Product Quantity$/ea $/subtotal
GST EXC GST INC GST EXC GST INC
Lysaght Fence Post – 2100mm 2 18.14 19.95 36.29 39.90
Lysaght Universal Rail – 2350mm 3 20.30 22.33 60.91 66.98
Fencing Infill Sheet – 1190mm 3 28.45 31.30 85.35 93.90
Self Drilling Fasteners SHS 1016N 27 0.22 0.24 5.89 6.48
Lattice – 2350mm 1 75.27 82.80 75.27 82.80
Ball Caps 1 16.00 17.60 16.00 17.60
Total price per 2350mm wide panel 279.71 307.66
Product Quantity$/ea $/subtotal
GST EXC GST INC GST EXC GST INC
Lysaght Fence Post – 2400mm 2 20.74 22.80 41.47 45.60
Lysaght Universal Rail – 2350mm 3 20.30 22.33 60.91 66.98
Fencing Infill Sheet – 1490mm 3 34.80 38.28 104.40 114.84
Self Drilling Fasteners SHS 1016N 27 0.22 0.24 5.89 6.48
Lattice – 2350mm 1 75.27 82.80 75.27 82.80
Ball Caps 1 16.00 17.60 16.00 17.60
Total price per 2350mm wide panel 303.94 334.30
Product Quantity$/ea $/subtotal
GST EXC GST INC GST EXC GST INC
Lysaght Fence Post – 2700mm 2 23.33 25.65 46.66 51.30
Lysaght Universal Rail – 2350mm 3 20.30 22.33 60.91 66.98
Fencing Infill Sheet – 1790mm 3 41.51 45.66 124.53 136.98
Self Drilling Fasteners SH1016N 27 0.22 0.24 5.89 6.48
Lattice – 2350mm 1 75.27 82.80 75.27 82.80
Ball Caps 1 16.00 17.60 16.00 17.60
Total price per 2350mm wide panel 329.26 362.14
Neetascreen/Smartascreen PLUS – COLORBOND® steel Panel Pricing (1500mm high)
Neetascreen/Smartascreen PLUS – COLORBOND® steel Panel Pricing (1800mm high)
Neetascreen/Smartascreen PLUS – COLORBOND® steel Panel Pricing (2100mm high)
Notes: 1. Panel pricing is indicative only. Actual panel prices vary depending on individual product discounts.2. Panel prices are based on post hole depth of 600mm.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
113
Fenc
ing
RRP
Product Height mmZINCALUME® steel $/ea Galvanised $/ea COLORBOND® steel $/ea
GST EXC GST INC GST EXC GST INC GST EXC GST INC
Infill sheet
1190 (non std) 27.89 30.68 N/A N/A 28.45 31.30
1490 34.59 38.05 N/A N/A 34.80 38.28
1790 41.33 45.46 N/A N/A 41.51 45.66
2090 48.97 53.87 N/A N/A 49.36 54.30
Non-standard23.33 /lm
25.66 /lm
N/A N/A23.91 /lm
26.30 /lm
Post
Height mmZINCALUME® steel
$/ea
Galvanised COLORBOND® steel
$/lm $/ea $/lm $/ea
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
2100 N/A N/A 8.64 9.50 18.14 19.95 8.64 9.50 18.14 19.95
2400 N/A N/A 8.64 9.50 20.74 22.80 8.64 9.50 20.74 22.80
2700 N/A N/A 8.64 9.50 23.33 25.65 8.64 9.50 23.33 25.65
3000 N/A N/A 8.64 9.50 25.92 28.50 8.64 9.50 25.92 28.50
Universal Rail Length mm
2350 N/A N/A 8.64 9.50 20.30 22.33 8.64 9.50 20.30 22.33
3100For raked panels only N/A N/A 8.64 9.50 26.78 29.45 8.64 9.50 26.78 29.45
Metal Teks Hex Head
10-16 x 16 (no neo)
Painted $/1000 Painted $/100
GST EXC GST INC GST EXC GST INC
218.33 240.16 28.38 31.22
Neetascreen – Fencing Components
Product Opening mm Height mmCOLORBOND® steel $/ea
GST EXC GST INC
Neetascreen Single Gate Kit 905
1200 299.45 329.40
1500 321.98 354.18
1800 351.18 386.30
2100 383.92 422.31
Neetascreen Extra Wide Gate Kit 1675
1200 309.01 339.91
1500 328.51 361.36
1800 354.51 389.96
2100 387.01 425.71
Neetascreen Plus Single Gate Kit 905
1200 314.43 345.87
1500 338.06 371.87
1800 369.66 406.63
2100 409.14 450.05
Neetascreen Plus Extra Wide Gate Kit 1675
1200 324.42 356.86
1500 348.82 383.70
1800 381.38 419.52
2100 422.18 464.40
Neetascreen/Neetascreen PLUS – Gate Kits
Notes: 1. Gate kits include stiles, rails, fasteners, edge cover strip and lattice clips (for plus option).2. Infill sheets, accessory kits, lattice, gate posts (60 x 60 and 65 x 65) and post caps are NOT included and should be ordered separately
depending on application.3. Refer page 120 for our standard range of gate accessories. 4. Single gate kits require 1 infill sheet, extra wide gate kits require 2 infill sheets.
Notes: 1. Non-standard and 1190mm infills subject to extended lead times.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
114
Fenc
ing
RRP
Product Height mmZINCALUME® steel $/ea Galvanised $/lm COLORBOND® steel $/ea
GST EXC GST INC GST EXC GST INC GST EXC GST INC
Infill sheet
1190 (non std) 27.89 30.68 N/A N/A 28.45 31.30
1490 34.59 38.05 N/A N/A 34.80 38.28
1790 41.33 45.46 N/A N/A 41.51 45.66
2090 48.97 53.87 N/A N/A 49.36 54.30
Non-standard23.33 /lm
25.66 /lm
N/A N/A23.91 /lm
26.30 /lm
Post
Height mmZINCALUME® steel
$/ea
Galvanised COLORBOND® steel
$/lm $/ea $/lm $/ea
GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
2100 N/A N/A 8.64 9.50 18.14 19.95 8.64 9.50 18.14 19.95
2400 N/A N/A 8.64 9.50 20.74 22.80 8.64 9.50 20.74 22.80
2700 N/A N/A 8.64 9.50 23.33 25.65 8.64 9.50 23.33 25.65
3000 N/A N/A 8.64 9.50 25.92 28.50 8.64 9.50 25.92 28.50
Universal Rail Length mm
2350 N/A N/A 8.64 9.50 20.30 22.33 8.64 9.50 20.30 22.33
3100For raked panels only N/A N/A 8.64 9.50 26.78 29.45 8.64 9.50 26.78 29.45
Metal Teks Hex Head
10-16 x 16 (no neo)
Painted $/1000 Painted $/100
GST EXC GST INC GST EXC GST INC
218.33 240.16 28.38 31.22
Smartascreen – Fencing Components
Smartascreen/Smartascreen PLUS – Gate Kits
Notes: 1. Non-standard and 1190mm infills subject to extended lead times.
Product Opening mm Height mmCOLORBOND® steel $/ea
GST EXC GST INC
Smartascreen Single Gate Kit 905
1200 299.45 329.40
1500 321.98 354.18
1800 351.18 386.30
2100 383.92 422.31
Smartascreen Extra Wide Gate Kit 1675
1200 309.01 339.91
1500 328.51 361.36
1800 354.51 389.96
2100 387.01 425.71
Smartascreen Plus Single Gate Kit 905
1200 314.43 345.87
1500 338.06 371.87
1800 369.66 406.63
2100 409.14 450.05
Smartascreen Plus Extra Wide Gate Kit 1675
1200 324.42 356.86
1500 348.82 383.70
1800 381.38 419.52
2100 422.18 464.40
Notes: 1. Gate kits include stiles, rails, fasteners, edge cover strip and lattice clips (for plus option).2. Infill sheets, accessory kits, lattice, gate posts (60 x 60 and 65 x 65), post caps and infill edge cover strips are NOT included and should be
ordered separately depending on application.3. Refer page 120 for our standard range of gate accessories. 4. Single gate kits require 1 infill sheet, extra wide gate kits require 2 infill sheets.5. Smartascreen gates require an Infill Edge Cover Strip, or reduce gate size and opening by 20mm.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
115
Fenc
ing
RRP
Miniscreen – COLORBOND® steel Panel Pricing (1500mm high)
Miniscreen – COLORBOND® steel Panel Pricing (1800mm high)
Miniscreen – COLORBOND® steel Panel Pricing (2100mm high)
Notes: 1. Panel pricing is indicative only. Actual panel prices vary depending on individual product discounts.2. Panel prices are based on post hole depth of 600mm.
Product Quantity$/ea $/subtotal
GST EXC GST INC GST EXC GST INC
Lysaght Fence Post – 2100mm 2 18.14 19.95 36.29 39.90
Miniscreen Rail – 2350mm 2 29.56 32.52 59.13 65.05
Miniscreen Centre Rail – 2350mm 1 34.26 37.69 34.26 37.69
Miniscreen Infill Sheet – 1490mm 3 48.00 52.80 144.00 158.40
Self Drilling Fasteners SHS 1016N 17 0.22 0.24 3.71 4.08
Ripple Teks 10 x 16 - 20 7 0.48 0.53 3.37 3.71
Lysaght Post Cap 1 1.61 1.77 1.61 1.77
Total price per 2350mm wide panel 282.37 310.60
Product Quantity$/ea $/subtotal
GST EXC GST INC GST EXC GST INC
Lysaght Fence Post – 2400mm 2 20.74 22.80 41.47 45.60
Miniscreen Rail – 2350mm 2 29.56 32.52 59.13 65.05
Miniscreen Centre Rail – 2350mm 1 34.26 37.69 34.26 37.69
Miniscreen Infill Sheet – 1790mm 3 57.68 63.45 173.04 190.35
Self Drilling Fasteners SHS 1016N 17 0.22 0.24 3.71 4.08
Ripple Teks 10 x 16 - 20 7 0.48 0.53 3.37 3.71
Lysaght Post Cap 1 1.61 1.77 1.61 1.77
Total price per 2350mm wide panel 316.59 348.25
Product Quantity$/ea $/subtotal
GST EXC GST INC GST EXC GST INC
Lysaght Fence Post – 2700mm 2 23.33 25.65 46.66 51.30
Miniscreen Rail – 2350mm 2 29.56 32.52 59.13 65.05
Miniscreen Centre Rail – 2350mm 1 34.26 37.69 34.26 37.69
Miniscreen Infill Sheet – 2090mm 3 67.35 74.09 202.05 222.27
Self Drilling Fasteners SHS 1016N 17 0.22 0.24 3.71 4.08
Ripple Teks 10 x 16 - 20 7 0.48 0.53 3.37 3.71
Lysaght Post Cap 1 1.61 1.77 1.61 1.77
Total price per 2350mm wide panel 350.79 385.87
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
116
Fenc
ing
RRP
Miniscreen PLUS – COLORBOND® steel Panel Pricing (1500mm high)
Miniscreen PLUS – COLORBOND® steel Panel Pricing (1800mm high)
Miniscreen PLUS – COLORBOND® steel Panel Pricing (2100mm high)
Notes: 1. Panel pricing is indicative only. Actual panel prices vary depending on individual product discounts.2. Panel prices are based on post hole depth of 600mm.
Product Quantity$/ea $/subtotal
GST EXC GST INC GST EXC GST INC
Lysaght Fence Post – 2100mm 2 18.14 19.95 36.29 39.90
Miniscreen Rail – 2350mm 2 29.56 32.52 59.13 65.05
Miniscreen Centre Rail – 2350mm 1 34.26 37.69 34.26 37.69
Miniscreen Infill Sheet – 1190mm 3 38.34 42.17 115.02 126.51
Self Drilling Fasteners SHS 1016N 27 0.22 0.24 5.89 6.48
Miniscreen Rail – 2350mm 1 29.56 32.52 29.56 32.52
Lattice – 2350mm 1 75.27 82.80 75.27 82.80
Ball Caps 1 16.00 17.60 16.00 17.60
Ripple Teks 10 x 16 - 20 7 0.48 0.53 3.37 3.71
Total price per 2350mm wide panel 374.79 412.26
Product Quantity$/ea $/subtotal
GST EXC GST INC GST EXC GST INC
Lysaght Fence Post – 2400mm 2 20.74 22.80 41.47 45.60
Miniscreen Rail – 2350mm 2 29.56 32.52 59.13 65.05
Miniscreen Centre Rail – 2350mm 1 34.26 37.69 34.26 37.69
Miniscreen Infill Sheet – 1490mm 3 48.00 52.80 144.00 158.40
Self Drilling Fasteners SHS 1016N 27 0.22 0.24 5.89 6.48
Miniscreen Rail – 2350mm 1 29.56 32.52 29.56 32.52
Lattice – 2350mm 1 75.27 82.80 75.27 82.80
Ball Caps 1 16.00 17.60 16.00 17.60
Ripple Teks 10 x 16 - 20 7 0.48 0.53 3.37 3.71
Total price per 2350mm wide panel 408.95 449.85
Product Quantity$/ea $/subtotal
GST EXC GST INC GST EXC GST INC
Lysaght Fence Post – 2700mm 2 23.33 25.65 46.66 51.30
Miniscreen Rail – 2350mm 2 29.56 32.52 59.13 65.05
Miniscreen Centre Rail – 2350mm 1 34.26 37.69 34.26 37.69
Miniscreen Infill Sheet – 1790mm 3 57.68 63.45 173.04 190.35
Self Drilling Fasteners SHS 1016N 27 0.22 0.24 5.89 6.48
Miniscreen Rail – 2350mm 1 29.56 32.52 29.56 32.52
Lattice – 2350mm 1 75.27 82.80 75.27 82.80
Ball Caps 1 16.00 17.60 16.00 17.60
Ripple Teks 10 x 16 - 20 7 0.48 0.53 3.37 3.71
Total price per 2350mm wide panel 443.18 487.50
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
117
Fenc
ing
RRP
Product Height mmCOLORBOND® steel $/lm COLORBOND® steel $/ea
GST EXC GST INC GST EXC GST INC
Infill sheet 1190 – – 38.34 42.17
1490 – – 48.00 52.80
1790 – – 57.68 63.45
2090 – – 67.35 74.09
Non standard 32.23 35.45
Miniscreen Rail
38
60
Length mm$/lm $/ea
GST EXC GST INC GST EXC GST INC
2350 12.58 13.84 29.56 32.52
3100For raked panels only
12.58 13.84 39.00 42.90
Miniscreen Centre Rail
50
25
2350 14.58 16.04 34.26 37.69
3100 14.58 16.04 45.20 49.72
Post 2100 8.64 9.50 18.14 19.95
2400 8.64 9.50 20.74 22.80
2700 8.64 9.50 23.33 25.65
3000 8.64 9.50 25.92 28.50
Metal Teks Hex Head10-16 x 16 (no neo)
Unpainted $/100 Unpainted $/1000 Painted $/100 Painted $/1000GST EXC GST INC GST EXC GST INC GST EXC GST INC GST EXC GST INC
20.21 22.23 136.63 150.29 28.38 31.22 218.33 240.16
Ripple Teks 10-16 x 20
46.56 51.22 400.34 440.37 54.32 59.75 482.03 530.23
Miniscreen – Fencing Components
Notes: 1. Non-standard and 1190 Infills are subject to extended lead times.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
118
Fenc
ing
RRP
Product Opening mm Height mmCOLORBOND® steel $/ea
GST EXC GST INC
Miniscreen Single Gate Kit 930
1200 389.29 428.22
1500 418.57 460.43
1800 456.53 502.18
2100 499.09 549.00
Miniscreen Extra Wide Gate Kit 1685
1200 401.74 441.91
1500 431.97 475.17
1800 471.14 518.25
2100 515.06 566.57
Miniscreen Plus Single Gate Kit 930
1200 N/A N/A
1500 439.48 483.43
1800 480.56 528.62
2100 531.88 585.07
Miniscreen Plus Extra Wide Gate Kit 1685
1200 N/A N/A
1500 458.67 504.54
1800 506.85 557.54
2100 561.87 618.06
Miniscreen/Miniscreen PLUS – Gate Kits
Notes: 1. Gate kits include stiles, rails, fasteners, edge cover strip and lattice clips (for plus option).2. Infill sheets, accessory kits, lattice, gate posts (60 x 60 and 65 x 65) and post caps are NOT included and should be ordered
separately depending on application.3. Refer page 120 for our standard range of gate accessories. 4. Single gate kits require 1 infill sheet, extra wide gate kits require 2 infill sheets.5. 1200mm may be subject to an extended lead time.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
119
Fenc
ing
RRP
Product Size (mm) PerPainted $ Unpainted $
GST EXC GST INC GST EXC GST INC
Lattice 815 Each 50.20 55.22 – –
1575 Each 69.02 75.92 – –
2350 Each 75.27 82.80 – –
3122 Each 105.04 115.54 – –
Slats
300mm
815 Each 57.51 63.26 – –
1575 Each 88.70 97.57 – –
2350 Each 118.46 130.31 – –
3100 Each 149.37 164.31 – –
Pickets
290m
m
50mm50mm 815 Each 74.98 82.48 – –
1575 Each 144.87 159.36 – –
2350 Each 216.20 237.82 – –
3100 Each 285.18 313.70 – –
Ball Cap
Each 16.00 17.60 N/A N/A
Lysaght Post Cap Each 1.61 1.77 N/A N/A
Plastic Black Cap (for square post)
60 x 60 Each N/A N/A 7.38 8.12
65 x 65 Each N/A N/A 7.38 8.12
Steel Post Cap (for square post)
75 x 75 Each – – – –
90 x 90 Each – – – –
100 x 100 Each – – – –
Square Post 60 x 60 x 1.6
2400 Each 125.47 138.02 103.76 114.14
3000 Each 156.84 172.52 128.90 141.79
Square Post 65 x 65 x 2.5*
2400 Each 143.01 157.31 – –
3000 Each 180.43 198.47 – –
Square Post 75 x 75 x 2.0
2400 Each 176.43 194.07 – –
Square Post 90 x 90 x 2.0
2400 Each 182.23 200.45 – –
Square Post 100 x 100 x 2.0
2400 Each 228.62 251.48 – –
Post Foot 60 x 60 Each N/A N/A 64.31 70.74
65 x 65 Each N/A N/A 74.20 81.62
Post Foot
Shark Fin Each N/A N/A 59.34 65.27
Fencing Accessories
Notes: 1. *To be used with extra wide gate kits.
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011
New South Wales/ACT
120
Fenc
ing
RRP
Fencing Accessories Continued
Gate Accessories
Notes: 1. GK1 – Economy Gate Kit is supplied as standard unless a specific kit is requested on the order.2. GK1 – Economy Single or Extra Wide Accessory Kit includes 2 x zinc plated hinges, 20 x self drilling screws,
1 x zinc plated economy latch, 1 x striker and 2 x stile caps (57 x 35).3. GK2 – Economy Accessory Kit Supplement (double gates) includes 2 x zinc plated hinges, 20 x self drilling screws,
2 x stile caps (57 x 35) and 1 x zinc plated drop bolt.4. GK3 – Standard Single or Extra Wide Accessory Kit includes 2 x satin black hinges, 24 x black self drilling screws,
lok-latch set, gate handle and 2 x stile caps (57 x 35).5. GK4 – Standard and Premium Accessory Kit Supplement (double gates) includes 2 x satin black hinges, 20 x black
self drilling screws, 2 x stile caps (57 x 35) and 1 x zinc plated drop bolt.6. GK5 – Premium Single or Extra Wide Accessory Kit includes 2 x satin black hinges, 26 x black self drilling screws,
lok-latch deluxe, gate handle and 2 x stile caps (57 x 35) .
Product SizeGalvanised $/ea Painted $/ea
GST EXC GST INC GST EXC GST INC
Gate Stiles 1200 256.80 282.48 264.48 290.93
1500 277.70 305.47 289.74 318.71
1800 306.05 336.66 321.70 353.87
2100 336.19 369.81 360.06 396.07
Gate Accessory Kits:
Economy Single or Extra Wide (GK1) 81.71 89.88
Economy Accessory Kit Supplement (Double Gates) (GK2) 65.39 71.93
Standard Single or Extra Wide (GK3) 202.70 222.97
Standard Accessory Kit Supplement (Double Gates) (GK4) 99.67 109.64
Premium Single or Extra Wide (GK5) 473.51 520.86
Premium Accessory Kit Supplement (Double Gates) (GK4) 99.67 109.64
Miniscreen Centre Rail Clip 8.08 8.89
Lattice Gate Clip 7.81 8.59
Gate Stile Cap 57 x 35 2.94 3.23
Drop Bolt – Zinc Plated 40.42 44.46
ProductSize (mm) Per
Painted $ Unpainted $GST EXC GST INC GST EXC GST INC
Post Cover Strip2400 Each 23.82 26.20 N/A N/A
Infill Edge Cover Strip 1760 Each 30.57 33.63 – –
2060 Each 32.33 35.56 – –
Post Stiffener
1200 Each – – 31.01 34.11
Post Extension340 Lm 16.85 18.54 16.58 18.24
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 121
1. General
1.1 All quotations are made and all orders for goods, products and materials (Goods) are accepted by BlueScope Lysaght on and subject to the following general terms and conditions and any special terms and conditions which are agreed to by BlueScope Lysaght in writing. Unless otherwise expressly agreed by BlueScope Lysaght, previous dealings between BlueScope Lysaght and any Purchaser or the imposition of additional or alternative terms and conditions by a Purchaser shall not vary or replace these general terms and conditions or be deemed in any circumstances whatsoever to do so.
1.2 BlueScope Lysaght reserves the right to accept or decline, in whole or in part, any order for Goods placed by a Purchaser.
1.3 The agreement to supply Goods to the Purchaser starts on the date BlueScope Lysaght agrees to supply the Goods to the Purchaser. This may not be the date the order is received by BlueScope Lysaght.
1.4 The law applicable to the agreement between BlueScope Lysaght and the Purchaser is the law of the State or Territory in which the BlueScope Lysaght office which received the Purchaser’s order is located. BlueScope Lysaght and the Purchaser submit to the jurisdiction of the relevant State or Territory courts.
2. Price
2.1 BlueScope Lysaght maintains a price list which sets out indicative prices for Goods ordered on or after the date on which BlueScope Lysaght states the prices shall take effect. The Bluescope Lysaght price list:
(a) may be varied by BlueScope Lysaght from time to time, provided that such variations only apply in respect of Goods ordered after the date of variation; and
(b) is subject to any contrary agreement (if any) between BlueScope Lysaght and the Purchaser regarding price.
2.2 Where a Consumer wishes to order Goods, BlueScope Lysaght will provide a quotation or otherwise notify the Consumer of a single total price, inclusive of GST, applicable to those Goods if the price is capable of being quantified. The Consumer shall be liable to pay to BlueScope Lysaght all amounts on account of GST in the same manner and by the same means as all other charges. BlueScope Lysaght will issue a tax invoice showing the amount of GST in respect of the supply if requested by the Consumer.
2.3 The price of Goods specified by BlueScope Lysaght in any quotation:
(a) takes precedence over indicative prices of Goods set out in the BlueScope Lysaght price list;
(b) will remain valid for a period of 30 days for an order made by the Purchaser in accordance with the quotation, unless otherwise specified; and
(c) is subject to any other conditions specified in the quotation.
2.4 Unless otherwise provided, prices do not include delivery charges. Delivery charges vary by region, and will be advised to the Purchaser at the time the quotation is made or otherwise prior to the order being confirmed. Any delivery charge will be shown as a separate amount on the invoice if applicable. Long lengths (as defined by Local State Transport Authorities) will be subject to any additional delivery charge.
2.5 Unless otherwise requested by the Purchaser in writing, prices quoted provide for BlueScope Lysaght’s standard packing arrangements which are set out in BlueScope Lysaght’s regional Price Book (Price Book) and are available upon request from your customer service representative.
2.6 Where the prices specified for Goods do not include GST or any other tax or government impost, the invoice will show such charges as a separate amount if applicable. The Purchaser shall be liable to BlueScope Lysaght for all such GST, excise, sales, levies or any other taxes or charges which may be established or levied by any governmental authority (domestic or foreign) upon the Goods or any part of the Goods, or upon the manufacture, use supply or delivery of same.
3. Payment
3.1 Subject to clause 3.2, payment for Goods purchased from BlueScope Lysaght must be on a cash basis with placement of order unless otherwise agreed to by BlueScope Lysaght.
3.2 Where the Purchaser has established an approved credit account with BlueScope Lysaght the Purchaser shall ensure that payment for the Goods is made to BlueScope Lysaght in accordance with the terms agreed between BlueScope Lysaght and the Purchaser. All payments are required to be made by the Purchaser at least one hour before the time at which trading banks close for business to enable banking on or before the due date.
3.3 The Purchaser will not be entitled to any agreed settlement discount where the Purchaser does not make payment as required by clause 3.2. Where the Purchaser has made a payment by cheque and has been granted a settlement discount and the cheque is subsequently dishonoured, the Purchaser will not be entitled to the settlement discount and shall pay BlueScope Lysaght the full invoice price for the Goods.
3.4 BlueScope Lysaght reserves the right to charge interest on any amount overdue from the date it became due to the date payment is received at the rate of 1.5% above the prevailing rate charged by Westpac Banking Corporation to prime borrowers on overdraft accounts in excess of $100,000.
3.5 Payments made by credit card will be subject to a surcharge of 1.5% of the payment amount for the Goods.
4. Default
4.1 Where the Purchaser is not a Consumer and is in default in the performance of any of its obligations under these terms and conditions, BlueScope Lysaght may refuse, without prejudice to any other rights it may have under these terms and conditions or at law, to supply or deliver further Goods to the Purchaser until such time as the Purchaser has remedied that default, and / or may choose to terminate the contract.
4.2 If the Purchaser (including a Consumer) commences to be wound up or is placed under official management or into liquidation or has a receiver and/or manager appointed in respect of any of its assets or becomes insolvent, commits any act of bankruptcy or becomes subject to any other analogous event, BlueScope Lysaght may at its option exercise the following rights in addition to any other rights it may have under these terms and conditions or at law:
(a) suspend deliveries of further Goods to the Purchaser whether under this contract or otherwise; or
(b) terminate the contract in relation to Goods that have not been delivered.
4.3 All reasonable costs relating to any action taken by BlueScope Lysaght to recover monies due from the Purchaser (including, without limitation, legal or other debt collection costs) will be payable by the Purchaser.
4.4 If the Purchaser is a Consumer, and the Consumer is in default in the performance of any of its material obligations under these terms and conditions, BlueScope Lysaght may refuse to deliver further Goods until such time as the Purchaser has remedied that default and where:
(a) the Consumer has not notified BlueScope Lysaght of any damage, inaccuracies or defects under clause 8 of this Contract; and
(b) the Consumer does not remedy that default within 14 days of the Consumer receiving written notification, or such other time as may be agreed by the parties,
BlueScope Lysaght may terminate the contract in relation to Goods that have not been delivered.
5. Specifications, materials or special orders
5.1 All descriptions, specifications, illustrations, drawings, data, dimensions and weights contained in catalogues, price lists or other advertising matter of BlueScope Lysaght or elsewhere are approximations only. They are intended by BlueScope Lysaght to be a general description for information and identification purposes and do not create a sale by description. BlueScope Lysaght reserves the right at any time to:
(a) produce Goods with such minor modifications from its drawings and specifications as it sees fit in accordance with BlueScope Lysaght’s minor production tolerances and improvements made to Goods from time to time; and
(b) alter specifications shown in its promotional literature to reflect changes made after the date of such publication.
5.2 BlueScope Lysaght shall not be bound to accept any change in product dimension, materials or finish, a reduction in the quantity ordered or other particulars of an order for Goods after BlueScope Lysaght has ordered special materials or commenced tooling for manufacture.
5.3 In the case of goods or components not of BlueScope Lysaght’s manufacture, BlueScope Lysaght shall give the Purchaser and use its best endeavours to enforce at the cost of and for the benefit of the Purchaser, such warranties and guarantees as BlueScope Lysaght has obtained from its suppliers.
5.4 Where BlueScope Lysaght is required to order special material or qualities for which a supplier of BlueScope Lysaght requests minimum order quantities, the Purchaser may be requested to accept an increase of the minimum quantity required to be ordered by BlueScope Lysaght to fulfil the order and if so requested the Purchaser shall be obliged to accept and pay for such increase. The price for the additional product shall be determined according to the unit price for the products included in the order.
5.5 If BlueScope Lysaght is required to process the Purchaser’s goods or materials then BlueScope Lysaght does not give any warranty or assurance that materials supplied by the Purchaser are suitable for such processing. BlueScope Lysaght accepts no responsibility and shall not in any way be liable to the Purchaser for any damage done or caused to such materials or goods, except if you are a Consumer and such loss or damage arises from the negligence or wilful misconduct of BlueScope Lysaght or any of its officers, employees or agents.
GENERAL TERMS AND CONDITIONS OF SALE OF BLUESCOPE STEEL LIMITED TRADING AS BLUESCOPE LYSAGHT ABN 16 000 011 058
RRP
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 122
5.6 The Purchaser expressly agrees that if the Goods, which are the subject of an order, are for a particular purpose or are required to possess certain characteristics, the Purchaser will specify that purpose or those characteristics in writing in the order.
5.7 If the Purchaser does not specify the particular purpose or the special characteristics in accordance with clause 5.6 and BlueScope Lysaght does not expressly confirm in writing that the Goods are reasonably fit for the specified purpose or that the Goods possess the specified characteristics, then unless the Purchaser is a Consumer, the Purchaser agrees that it did not rely on the skill or judgment of BlueScope Lysaght in relation to the suitability of the Goods for a particular purpose or the special characteristics possessed by the Goods.
6. Delivery and Risk
6.1 Unless otherwise agreed, the delivery of Goods is subject to the standard delivery conditions which are set out in the Price Book and are available on request from your customer service representative. BlueScope Lysaght may vary these standard delivery conditions from time to time, provided that such variations only apply to orders for Goods made after the date of variation.
6.2 Handling Safety – BlueScope Lysaght product may be sharp and heavy. It is recommended that heavy-duty cut resistant gloves and appropriate manual handling techniques or a lifting plan be used when handling material. Material Safety Data Sheets are available from www.bluescopesteel.com.au.
6.3 Unless otherwise agreed by BlueScope Lysaght, delivery of Goods shall be affected DAS (Delivery At Site or Store) during BlueScope Lysaght’s standard delivery times as published from time to time in the Price Book (and available on request from your customer service representative) and shall be deemed to occur when the Goods have arrived and are ready for unloading at the nominated site or store (which may be the Purchaser’s nominated carrier’s depot, provided the Purchaser ensures there is suitable materials handling equipment available at the depot). The Goods are at the Purchaser’s risk from the time at which they are delivered to the Purchaser or its nominee.
6.4 Where Goods are delivered DAS the following shall apply, unless otherwise agreed:
(a) the Purchaser shall be responsible for unloading the Goods and shall ensure that the Goods are unloaded without delay on arrival at the nominated site or store.
(b) BlueScope Lysaght reserves the right to charge the Purchaser any costs which it incurs as a result of any delay by the Purchaser in unloading the Goods.
(c) Where the Purchaser or his agent is not in attendance at the nominated site or store when the Goods arrive, BlueScope Lysaght reserves the right to unload the Goods and the Purchaser shall be liable to pay BlueScope Lysaght for the cost of this unloading. In the event of the site or store being unattended the delivery docket/manifest signed by the cartage contractor shall be prima facie evidence of due delivery of the Goods. BlueScope Lysaght shall not be responsible for any Goods which are stolen, pilfered or damaged after being unloaded at an unattended site or store, including to a Consumer if the Consumer and BlueScope Lysaght had agreed delivery arrangements and the site is subsequently unattended.
(d) Where unloading of the Goods cannot be effected, the Purchaser shall be liable to pay BlueScope Lysaght all costs incurred by BlueScope Lysaght including, if applicable, a return delivery fee at the prevailing freight rates.
6.5 Dates and times quoted for delivery are estimates only. Maximum lengths for products vary by State and Territory and delivery of such will be determined by BlueScope Lysaght on a case by case basis.
6.6 BlueScope Lysaght shall not be obliged to complete any order in one delivery and expressly reserves the right to deliver by instalments. Where BlueScope Lysaght delivers by instalments each instalment shall be deemed to be sold to the Purchaser under a separate contract. Failure to deliver any one instalment by the time quoted for delivery of that instalment (if any) shall not entitle the Purchaser to repudiate the order.
6.7 Goods ordered for collection will be held for a maximum period of 10 working days after the specific collection date. If the Goods are not collected by that time, they may be delivered to (at BlueScope Lysaght’s option) the Purchaser’s site or store or to a store selected by BlueScope Lysaght and all costs incurred by BlueScope Lysaght in relation to the holding and delivery of the Goods shall be charged to and be paid by the Purchaser.
6.8 No defect or claim in respect of Goods delivered shall entitle the Purchaser to reject delivery of other Goods, which are not subject to any defect or claim, delivered as part of the order.
6.9 If BlueScope Lysaght is prevented either directly or indirectly from performing any of its obligations under these terms and conditions, including without limitation, making a delivery of the Goods or any part of the Goods by reason for Force Majeure it shall be entitled, at its option, by notice to the Purchaser, either to:
(a) extend the time for delivery of the Goods for a reasonable period; or
(b) subject to refunding the Purchaser for any payment already made to BlueScope Lysaght in respect of those particular Goods (if any), to terminate this contract,
and the Purchaser shall not have any claim against BlueScope Lysaght for damages or any other remedy for breach of contract. “Force Majeure” shall mean an act of God, war, fire, strike, lockout, trade or industrial disputes, government interference, transport delays, accidents, breakdown of plant or machinery, non delivery or shortage of supplies or any other cause beyond BlueScope Lysaght’s control.
7. Title
7.1 BlueScope Lysaght shall remain the legal and equitable owner of Goods supplied until BlueScope Lysaght has received in full the purchase price in respect of all Goods supplied by BlueScope Lysaght and all other monies owing by the Purchaser to BlueScope Lysaght. In the case of payment by cheque, payment shall not be deemed to be received by BlueScope Lysaght until the same has been cleared by the bank on which it is drawn.
7.2 Until title to and ownership of the Goods passes to the Purchaser, the Purchaser must hold the Goods for BlueScope Lysaght as bailee, store the Goods properly and separately from the Purchaser’s own goods, retain them in good and merchantable condition and fully insure the Goods against loss or damage, however caused. The Purchaser must not create any encumbrance over the Goods which is inconsistent with BlueScope Lysaght’s title and ownership to the Goods.
7.3 If:
(a) any of the events in clause 4.1, 4.2 or 4.4 occur; or
(b) in BlueScope Lysaght’s reasonable opinion the payment of any amount in respect of the Goods supplied by BlueScope Lysaght is in jeopardy (for example where the Purchaser is in default under a separate contract with BlueScope Lysaght or a related entity),
then the Purchaser irrevocably authorises a representative of BlueScope Lysaght to enter upon any site where the Goods are located to take possession of the Goods without any previous notice, and the Purchaser indemnifies BlueScope Lysaght against any action, claim or demand arising out of any act lawfully done by BlueScope Lysaght in the exercise of its powers and BlueScope Lysaght shall be further entitled to resell any Goods which it has so taken into possession. Where BlueScope Lysaght has taken possession of any Goods in accordance with this clause it shall be released from all its obligations under the contract of sale in respect of the Goods.
7.4 Where the Purchaser sells Goods to which it does not have title, the Purchaser shall receive the proceeds of sale of those Goods as trustee for BlueScope Lysaght and shall keep such proceeds in a separate account.
8. Damage, Inaccuracies and Defects
8.1 The Purchaser shall check all Goods received immediately upon unloading and shall notify BlueScope Lysaght of any inaccuracies or short supply of Goods or any damaged Goods within 7 days of the date of delivery of the Goods. BlueScope Lysaght will rectify any inaccuracies or short supply or damaged Goods as soon as it is reasonable practicable. BlueScope Lysaght will not be responsible for any loss or damage whatsoever and howsoever caused arising out of or resulting from such inaccuracies or short supply or damage, except if you are a Consumer and such loss or damage arises from the negligence or wilful misconduct of BlueScope Lysaght, or any of its officers, employees or agents.
8.2 Any queries regarding items shown on invoices issued by BlueScope Lysaght shall be lodged by the Purchaser with BlueScope Lysaght within 30 days of the issue date of the relevant invoice.
8.3 The Purchaser shall promptly notify BlueScope Lysaght of any alleged defects in the Goods upon becoming aware of the defect and shall provide BlueScope Lysaght with all relevant details to enable BlueScope Lysaght to assess the alleged defect.
9. Equipment
9.1 All roll toolage, shears, lifting and associated equipment which BlueScope Lysaght makes or obtains to produce the Goods, shall, unless otherwise expressly agreed by BlueScope Lysaght, be and remain the property of BlueScope Lysaght and any payment made with respect to them shall be deemed to be a charge in respect of their use. These and any other special tools, jigs, fixtures and patterns acquired or supplied by BlueScope Lysaght for the fulfilment of the order are the property of BlueScope Lysaght and are not to be used without its authority.
RRP
New South Wales/ACT
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 123
10. Warranties, Liabilities and Indemnities
10.1 Goods supplied by BlueScope Lysaght shall be installed in accordance with BlueScope Lysaght’s recommended fixing procedures as published from time to time and available on request from your customer service representative.
10.2 BlueScope Lysaght acknowledges that certain laws imply terms, conditions or warranties into contracts for the supply of goods or services that cannot be excluded. For example, for Consumers, goods come with non-excludable conditions under consumer protection legislation that they will be of merchantable quality and reasonably fit for the purpose for which they are supplied, and services come with non-excludable warranties that they will be provided with due care and skill and will be reasonably fit for their purpose. Nothing in these terms and conditions is intended to exclude or restrict the application of such laws.
10.3 Subject to the rights of Consumers set out in clause 10.2:
(a) BlueScope Lysaght shall not be responsible for the consequence of any representation made or technical advice given by its employees, agents or sub-contractors in connection with the design, installation and use of the Goods, and the Purchaser agrees that all such advice is accepted by the Purchaser entirely at the Purchaser’s risk;
(b) or as otherwise expressly specified in the terms of any applicable written warranty provided by BlueScope Lysaght, BlueScope Lysaght’s liability to the Purchaser (whether arising under statute, contract, tort (including negligence), equity or otherwise) for any defect in the Goods, or the supply of the Goods, is limited, at BlueScope Lysaght’s option, to:
(i) in the case of Goods, the repair of the Goods, the replacement of the Goods or paying for the cost of repair or replacement of the Goods; or
(ii) in the case of services, the resupply of services or paying for the cost of resupplying the services;
(c) and also subject to clause 10.3(b), BlueScope Lysaght is not liable to the Purchaser or anyone else in connection with the Goods or the supply of the Goods or with these terms and conditions (including any changes to the terms and conditions), including without limitation for:
(i) any losses, costs, damages, expenses, claims, demands, actions, suits or proceedings (including without limitation for damage to the Goods or injury to any person) arising from:
(A) the loading, unloading or delivery of the Goods;
(B) a failure to deliver, or delay in delivering, the Goods;
(C) a failure to install the Goods in accordance with BlueScope Lysaght’s recommended fixing procedures as published from time to time;
(D) the removal of defective Goods or the installation of replacement Goods; or
(E) the use of any tool or equipment loaned or hired out by BlueScope Lysaght;
(ii) any direct, indirect or consequential loss or damage, any loss of actual or anticipated savings, opportunity, revenue, profit or goodwill, or other economic loss; and
(iii) any claim, action or proceeding by a third party against the Purchaser (or any loss, damages or liability incurred or suffered by the Purchaser as a result of any such claim, action or proceeding); and
(d) the Purchaser indemnifies BlueScope Lysaght from and against all loses, damages, costs and expenses suffered or incurred by BlueScope Lysaght, and all claims, demands, suits, actions or proceedings made or brought against BlueScope Lysaght, arising out of:
(i) BlueScope Lysaght’s use of or reliance on any materials, design, drawing or specification provided to BlueScope Lysaght by the Purchaser (including any allegation or claim that any such use or reliance by BlueScope Lysaght infringes the intellectual property rights of any person);
(ii) any loss or damage caused by or during the processing of materials supplied to BlueScope Lysaght by the Purchaser; or
(iii) any loss or damage caused by any tool or equipment, or the use of any tool or equipment, hired out by BlueScope Lysaght to the Purchaser,
except if you are a Consumer and such loss or damage arises from the negligence or wilful misconduct of BlueScope Lysaght, or any of its officers, employees or agents.
11. Miscellaneous
11.1 Non stock items are not returnable by the Purchaser to BlueScope Lysaght. BlueScope Lysaght may in its discretion accept the return of stock items and in so doing may charge the Purchaser a restocking charge.
11.2 Nothing in these terms and conditions shall constitute BlueScope Lysaght as a subcontractor of the Purchaser. BlueScope Lysaght’s obligations are limited to those of a material supplier.
11.3 BlueScope Lysaght and the Purchaser may conduct business by Electronic Data Interchange (EDI). The Purchaser agrees that if it has EDI capability with BlueScope Lysaght’s EDI is the preferred method of conducting business.
11.4 BlueScope Lysaght and the Purchaser agree that EDI will be conducted in accordance with the terms of any Electronic Trading Partner Agreement to which they are parties and into which these general terms and conditions of sale are incorporated.
In these terms and conditions a Purchaser means a person, being an incorporated or unincorporated business or an individual, who acquires Goods from BlueScope Lysaght, and includes a Consumer. A Consumer means a person who has acquired Goods from BlueScope Lysaght for personal, domestic or household use and those Goods are ordinarily acquired for such use.
RRP
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 124
B
Bondek 95
C
Cold-formed Sections 97Colour Availability – Fencing 8Colour Availability – Home Improvements 7Colour Availability – Rainwater Goods 6-7Colour Availability – Roofing & Walling 4-5Custom Blue Orb 32Custom Blue Orb Accessories (see Custom Orb) 32Custom Blue Orb – Aquaplate 32Custom Blue Orb – Curved Flashings 32Custom Blue Orb – Curving and Bullnosing 32-34Custom Orb 29Custom Orb Accessories 29-31
D
Dektite Pipe Flashings 84Delivery & Additional Charges 11-12Delivery Terms & Conditions 13Downpipes & Accessories 68-69
E
Easyclad & Accessories 56Edgeform 95
F
Fasteners – General 86-87Fasteners (see profile)Fencing Accessories 119-120Firmlok Beams & Accessories 107Flashing – Custom 73-79Flashings – Standard 72Flatdek & Accessories 45-46Flatdek & Accessories (Home Improvements) 105-106Formwork Accessories 96Forms Available 25-27
G
Gate Accessories 120
H
Half Round Gutters & Accessories 65-67Home Improvements Posts & Accessories 108-109House Frame Components 99House Frame Supraframe 100House Frame Supratruss 101
IInsulation – Building Blanket with Foil 83Interlok II Grating & Accessories 93-94
K
Klip-Lok 406 41Klip-Lok 406 Accessories 41-42Klip-Lok 700 Hi-Strength 39Klip-Lok 700 Hi-Strength Accessories 39-40
L
Light Steel Sections – Topspan 102Longline 305 43Longline 305 Accessories 43-44
M
Mini Orb & Accessories 50Mini Orb Curving and Bullnosing 50-52Miniscreen Components 117Miniscreen Panels 115Miniscreen Plus Panels 116Miniscreen/ Miniscreen Plus Gate Kits 118Multiclad & Accessories 55
N
Neetascreen Components 113Neetascreen Panels 111Neetascreen/Neetascreen Plus Gate Kits 113Neetascreen Plus Panels 112Novaline Fascia & Accessories 60Novaline Fascia Cover 60
P
Packing Options 23-24Paints & Sealants 84Panelrib & Accessories 54Patio Post & Accessories 108Polycarbonate Sheeting & Accessories 82Production Schedule NSW 9Production Schedule – Purlins 10Purlin Accessories 92Purlin Bridging 90-91Purlin Product Range 89
Q
Quad Gutter – Hi Front 61Quad Gutter – Lo Front 62Quantity Calculator – Roofing & Walling 3Quika-Floor 103
IndexRRP
Prices are subject to change without notice. Additional charges may apply. Effective 04 April 2011 125
R
Roof Infill Strips 85Roofing Wire 81Rooftrak 47-48
S
Site Accessibility Form 22Sheerline Gutter & Accessories 63Smartascreen Components 114Smartascreen Panels 111Smartascreen Plus Panels 112Smartascreen/Smartascreen Plus Gate Kits 114Spandek 37Spandek Accessories 37-38Supraframe Components 100Supratruss Components 101
T
Tape 83Terms & Conditions 121-123Tools 84Topspan 102Tradework 70-71Translucent Sheeting & Accessories 81Transport Safety Guideline – Customer Pickups 14Transport Schedule Arndell Park 15 Canberra 17 Structural 16 Coffs Harbour 19 Dubbo 20 Emu Plains 16 Newcastle 18 Tamworth 21Trimdek 35Trimdek Accessories 35-36Trimline Gutter & Accessories 64Trimwall & Accessories 53
V
Ventilators 83
W
Walling Metal Trims 57-58
IndexRRP
Sydney
Sales /Order EnquiriesTel: (02) 9854 7444 or 13 30 38Fax: (02) 9854 7499 or 1300 309 0387.30am – 5.00pmEmail: [email protected]
Sydney Branches
Arndell Park29-31 Penelope Crescent,Arndell Park NSW 2148Monday – Friday6.30am – 4.30pmTel: (02) 9854 7410Fax: (02) 9854 7499Email: [email protected]
Emu Plains128-138 Russell Street,Emu Plains NSW 2750Monday – Friday7.30am – 4.30pmTel: (02) 4720 1930Fax: (02) 4720 1941
Smithfield101 Woodpark Road,Smithfield NSW 2164Monday – Friday6.30am – 4.30pmTel: (02) 9892 4000Fax: (02) 9892 4999
Regional
Batemans Bay15 Russell Street,Batemans Bay NSW 2536Monday – Thursday7.00am – 4.30pmFriday7.00am – 4.00pmTel: (02) 4472 4099Fax: (02) 4472 5099
Cardiff (Newcastle)43 Munibung Road,Cardiff NSW 2285Monday – Friday7.30am – 5.00pmTel: (02) 4902 5800 or 13 30 38Fax: (02) 4902 5897 or 1300 309 038
Coffs Harbour2 Cook Drive,Coffs Harbour NSW 2450Monday – Friday7.30am – 4.30pmTel: (02) 6650 4400Fax: (02) 6650 4427
Dubbo35 Cobbora Road,Dubbo NSW 2830Monday – Friday7.30am – 5.00pmTel: (02) 6882 6077Fax: (02) 6884 9782
TamworthCnr Cook and Goonan StreetsTamworth NSW 2340Monday – Friday7.30am – 5.00pmTel: (02) 6765 9003Fax: (02) 6762 5738
Queanbeyan13-15 Waterloo Street,Queanbeyan NSW 2620Monday – Friday8.00am – 4.30pmTel: (02) 6299 1861Fax: (02) 6299 2085
Other
Technical Assistance/ Product LiteratureMonday – Friday8.30am – 5.00pmTel: 1800 641 417Fax: 1800 800 744
CreditMonday – Friday8.30am – 4.30pmTel: (03) 8540 8620Fax: (03) 8540 8136
NationalSuite 116, Jones Bay Wharf26-32 Pirrama Road,Pyrmont NSW 2009Tel: (02) 9292 6666Fax: (02) 9292 6620
BlueScope Lysaght – NSW Contact Details
LYN
0127
01/
11
Information, brochures and your local distributor
1800 641 417Please check the latest information which is always available at www.lysaght.com
www.lysaght.com
© Copyright BlueScope Steel Limited,04 April 2011. Lysaght product names, BLUESCOPE®, LYSAGHT®, COLORBOND®, ZINCALUME®, AQUAPLATE® and TRUCORE®
are registered trade marks of BlueScope Steel Limited, ABN 16 000 011 058.Fastener names are trade marks of ITW Buildex.
QUIKA-FLOOR® and UNI-PIER® are registered trade marks of Quika-Floor Pty Limited.
The Lysaght® range of products is exclusively made by BlueScope Steel Limited, trading as BlueScope Lysaght.