Pcs 0626

AIR CONDITIONING SYSTEM

C OOLING ONLY [50 Hz ]

PCS0626

DealerHead Office:Umeda Center Bldg., 2-4-12, Nakazaki-Nishi,Kita-ku, Osaka, 530-8323 Japan

Tokyo Office:JR Shinagawa East Bldg., 2-18-1, Konan,Minato-ku, Tokyo, 108-0075 Japan

http://www.daikin.com/global/

1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided and choose an outdoor unit with anti-corrosion treatment.

Cautions on product corrosion

Warning Daikin Industries, Ltd.’s products are manufactured for export to numerous countries throughout the world. Daikin Industries, Ltd. does not have control over which products are exported to and used in a particular country. Prior to purchase, please therefore confirm with your local authorized importer, distributor and/or retailer whether this product conforms to the applicable standards, and is suitable for use, in the region where the product will be used. This statement does not purport to exclude, restrict or modify the application of any local legislation.Ask a qualified installer or contractor to install this product. Do not try to install the product yourself. Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or contractor to install those parts and accessories. Use of unauthorized parts and accessories or improper installation of parts and accessories can result in water or refrigerant leakage, electrical shock, fire or explosion.Read the User's Manual carefully before using this product. The User's Manual provides important safety instructions and warnings. Be sure to follow these instructions and warnings.

If you have any inquiries, please contact your local importer, distributor and/or retailer.

Printed on 100% recycled paper with soy ink.Specifications, designs and other content appearing in this brochure are current as of July 2006 but subject to change without notice.

ISO 14001 is the standard defined by the International Organization for Standardization (ISO) relating to environmental management systems. Our group has been acknowledged by an internationally accredited compliance organisation as having an appropriate programme of environmental protection procedures and activities to meet the

About ISO 14001

ISO 9001 is a plant certification system defined by the International Organization for Standardization (ISO) relating to quality assurance. ISO 9001 certification covers quality assurance aspects related to the “ design, development, manufacture, installation, and supplementary service” of products manufactured at

About ISO9001

JMI-0107 JQA-1452 EC99J2044 JQA-E-90108

c All rights reservedPrinted in Japan 07/06/003 SW • HP • SS

CEILING MOUNTED CASSETTE TYPE

FHC18NUV1 FHC21NUV1 FHC26NUV1 FHC36NUV1 FHC42NUV1R18NUV1 R21NUV1 R26NUV1 / Y1 R36NUV1 / Y1 R42NUY1

FHC48NUV1R48NUY1Outdoor unit

Indoor unit

18,0005.3

4,560

21,0006.2

5,290

26,0007.6

6,550

36,00010.6

9,100

42,00012.3

10,600

48,00014.1

12,100

2 2.5 3 4 5 6

kW

Btu/h

kcal/h

CEILING SUSPENDED TYPE


OUTDOOR UNIT

R18NUV1 R21NUV1 R26NUV1 / Y1 R36NUV1 / Y1

DUCT CONNECTION

LOW STATIC PRESSURE TYPE

FDBG18NUV1 FDBG21NUV1 FDBG26NUV1

FH21NUV1 FH26NUV1 FH36NUV1 FH42NUV1R21NUV1 R26NUV1 / Y1 R36NUV1 / Y1 R42NUY1

FH48NUV1R48NUY1

R18NUV1 R21NUV1 R26NUV1 / Y1

51,00015.0

12,900

6.556,000

16.414,100

7

R51NUY1R48NUY1R42NUY1 R56NUY1

HP

PACKAGED AIR CONDITIONERS

Cooling only

Outdoor unitIndoor unit

Outdoor unitIndoor unit

Outdoor unitIndoor unit FDMG26NUV1 FDMG36NUV1 FDMG42NUV1 FDMG48NUV1

R26NUV1 / Y1 R36NUV1 / Y1 R42NUY1 R48NUY1FDMG51NUV1

R51NUY1FDMG56NUV1

R56NUY1

MIDDLE STATIC PRESSURE TYPE

Capacity *1

The values given for2 HP–6 HP is for FHC type,6.5 HP–7 HP is for FDMG type.

*1. Note : Nominal cooling capacities are based on the following conditions: Return air temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB. Equiv. refrigeration piping, 7.5 m (horizontal)

The perfect match for tastefully designed offices and stores. CEILING SUSPENDED TYPE

DUCT CONNECTION TYPEPeople are drawn to beaut i fu l ly designed stores that express the latest . People work best in off ices imbued with funct ional beauty. Daik in ’s SkyAir is the perfect choice to br ing high qual i ty air condi t ioning to stores and off ices l ike th is. Thanks to i ts many advantages such as quiet operat ion, ease of use and f lexible instal lat ion, the SkyAir enjoys an excel lent reputat ion throughout the wor ld wherever i t is used.

Simple design and quiet operat ionAuto-swing air f low br ings comfort to each and every corner of the room. Instal lat ion and maintenance are easy.

The indoor uni t is instal led inside the cei l ing and ducts blow the air in any direct ion. Comfort is provided without even knowing that an air condi t ioner is instal led.

Simple design and quiet operat ionAuto-swing air f low br ings comfort to each and every corner of the room. Instal lat ion and maintenance are easy.

The indoor uni t is instal led inside the cei l ing and ducts blow the air in any direct ion. Comfort is provided without even knowing that an air condi t ioner is instal led.

This uni t is instal led at center cei l ing. Air is b lown in four direct ions to br ing comfort . Operat ion is quiet .

This uni t is instal led at center cei l ing. Air is b lown in four direct ions to br ing comfort . Operat ion is quiet .

4

Quiet, decor-blending form and easy installation in new or old buildings.

3


BRC7C613WA s ignal rec eiver must be added to the indoor unit.

Note: R emote c ontroller c able not inc luded. C ables must be proc ured loc ally.

Wireless remote c ontroller and s ignal rec eiver unit are sold as a set.

Wired LCD remote controller

Wireless LCD remote controller

BRC1C61

FHC18NU–48NUCooling only

Signal receiver unit (Installed type)

FHC-NU

Optimal comfort and convenience assured by three blow modes

Compact body and quiet operation

A newly shaped air discharge opening increases flow without increasing wind speed. Discharged air reaches farther than before.

Accessory required for indoor unitOption

Indoor units use anaerodynamically designedDiffuser Turbo Fan

Wide air distribution

Installable on high ceilings

Program "Dry"

Switchable fan speed: High/Low

Multi-Flow System

Two selectable thermo-sensors

Unified square panelsAll models from the 18NU to 48NU use the same size panel. Multiple unit installations maintain a physical uniformity that is aesthetically pleasing and make it easier to plan ceiling lighting systems and to design interiors.

Quick and easy to install

Both indoor unit and wired remote controller (option) contain thermo- sensors. Temperature detection can be set at the unit or, to further improve comfort level, closer to the target area at the wired remote control.

Draft resistance has been reduced by incorporating, into a single unit, an impeller and a diffuser to control air flow inside the unit. The Diffuser Turbo Fan is both quiet during operation and compact.

Even with the panels attached, the indoor unit is one of the lightest in the industry.

All models suspended without uppers

90° rotatingair intake grille

Provided with drain water lift-up mechanism

The high-performance filter and other options are easily clipped into place. There is no need for a screwdriver.

Easy installation of options

Just 240 mm thick. Installable under low-lying beams (18NU—26NU)

Easy height adjustment

Dehumidification is computer controlled to prevent abrupt and uncomfortable changes in air temperature.

1 pattern4-way blow

4 pattern3-way blow

3 pattern2-way blow

" " denotes piping direction. " " denotes sealing member for air discharge outlet (option) .

Number of blow outlets used

18NU–26NU4-wayblow

3-wayblow

2-wayblow

4-wayblow

3-wayblow

2-wayblow

36NU–48NU

2.7 m3.0 m3.5 m

3.0 m3.3 m3.5 m

3.5 m3.8 m-

3.2 m3.6 m4.2 m

3.6 m4.0 m4.2 m

4.2 m4.2 m-

Note: Operation noise inc reases when us ing 2-way or 3-way

Blow direction can be selected according to installation.

StandardCeiling heightHigh ceiling

High ceiling

Criteria for ceiling height and number ofblow outlets

Note: For 3-way or 2-way blow installation, the sealing member for air disc harge outlet (option) must be used to c lose off the unused outlet(s ).

26NU 35 dB 30 dB

18NU 33 dB 29 dB

950 mm

950

mm

Same for all models

Indoor unit High Low

36NU 42 dB 36 dB

21NU 35 dB 30 dB

42NU 42 dB 36 dB48NU 42 dB 36 dB

Diffuser

B lade

*Thermo-sensor on indoor unit must be used when the air c onditioner is c ontrolled from an-other room.

(Wireless remote c ontroller does not have a

*When the thermostat turns off.

Note: Fac tory settings are for s tandard c eiling height and 4-way blow. High c eiling settings 1 and 2 are set with the remote

*1 *2

Sw

ing

p

att

ern

se

lec

tion

Sw

itch

ab

le

fan

sp

ee

d

Au

to

swin

g

Pro

gra

m

"Dry

"

Hig

h

ce

ilin

g

ap

plic

atio

n

Tim

er

sele

cto

r

Dra

in

wa

ter

lift-

up

m

ec

ha

nis

m

Pre

-ch

arg

ed

fo

r u

p

to

15

m

Lo

ng

-life

fil

ter

Mo

ld

resi

sta

nt

tre

atm

en

t fo

r fil

ter

Filt

er

sig

n

Ce

ilin

g

soili

ng

p

reve

ntio

n

Ultr

a

lon

g-l

ife

filte

r

Hig

h-e

ffic

ien

cy

filte

r

Fre

sh

air

in

take

ki

t

Au

to-r

est

art

PE

fin

Tw

o

sele

cta

ble

th

erm

o-s

en

sors

Cooling only

MildewpreventionComfort Work & Servicing Control features OthersFeature

Features

*1Applic able when wired remote c ontroller is used*2Applic able to R 36NU– R 48NU outdoor units

• • • • • • • • • • • • • • • •Model

Note: If the wireless remote c ontrol option is installed, a light rec eptor unit is housed in one of the ad-

240 mm *1 245 mm *2

750 mm

*1 298 mm thic k with 36NU– 48NU*2 303 mm thic k with 36NU– 48NU

Each corner of the unit has an Adjuster Pocket that lets you easily adjust the unit's suspended height.

Installed in any direc tion.

Note: B low direc tion is set to the standard pos ition when the unit is shipped from the fac tory. The pos ition c an be c hanged from the remote c ontroller.

Blow directionDesired situation

Auto-swing

Blow direction can be set to 5 levelsDraft prevention(In heating mode)

Auto blow direction control

S ettable to 5 different levels between 10° and 40°



Auto-swing between10° and 40°



When drafts are unwanted For gentle drafts(Ceiling is soiled.) When ceilings must be kept spotlessDraft prevention setting Standard setting Setting to prevent soiling of ceiling

At heating startup and thermo OFF*, air blow is auto-matic ally set to a near horizontal 10 ̊ to prevent direc t exposure to c ool air drafts .

The last blow direc tion is saved in memory and automatic ally set the next time the unit is turned ON. (Fac tory setting is 65 ̊ for heating and 30 ̊ for c ooling.)

At heating startup and ther-mo OFF*, air blow is auto-

matic ally set to 30 ̊ to prevent both direc t expo-sure to c ool air drafts and c ontac t with c eilings .

Super Cassette

1

2

1

2

(m)2.7

3

(m)3.2

4 (m)32101234 (m)

Conventional model

2.5 m/sec2.5 m/sec

2.0 m/sec2.0 m/sec

1.5 m/sec1.5 m/sec

1.0 m/sec1.0 m/sec

0.5 m/sec0.5 m/sec

Air blow distribution comparison•42NU

(220V)

42/ 36dBFHC36NU

(220V)

High Low

Top-classnoise attenuation

6

Upgrade to an even more quiet and compact system.

5


46/ 40dBFH36NU

(220V)

High Low


BRC7NU66A s ignal rec eiver must be added to the indoor unit.

Note: R emote c ontroller c able not inc luded. C ables must be proc ured loc ally.

Wireless remote c ontroller and s ignal rec eiver unit are sold as a set.

Wired LCD remote controller

Wireless LCD remote controller

BRC1NU61

FH21NU—48NUCooling only

Signal receiver unit (Installed type)

44 dB21NU26NU 44 dB

Quiet operationSpreads comfortable air throughout the room

Easier installation for greater freedom of design

Wide air discharge openings produce a spreading 100° air flow

Air is blown up to 50° in the downward direction.

Less need for edge space, more freedom of installation

Uniform height and depth. Narrower design for small-capacity models to meet tighter dimensional constraints.

All wiring and internal servicing done from below the unit

Installable on ceilings 3.5 m high

Switchable fan speed: High/Middle/Low

Program "Dry"


36NU 46 dB 40 dB42NU 48 dB 42 dB48NU 49 dB 43 dB

*Water used in the test-run c an now be drained from the air disc harge opening rather than from the s ide as was formerly the c ase.

Weight of all models reduc ed (down 10% c ompared with previous models ). Transfer and installation work is less arduous .

Improved-oil resistant grilleOil-resistant plastic is used for the air discharge grille. This improves durability in restaurants and other similar environments.

Absence of bristles minimizes clinging dirt and simplifies cleaning.

It is easy to wipe dirt off the flat side and lower surfaces of the unit.

The unit fits more snugly into tight spaces.

Pipes more easily rigged, tooPlastic panels are used to conceal piping holes. Holes can be easily punched out without requiring special tools.

Environmentally conscious designTo facilitate recycling, composition of all plastic parts is marked on each part.

For all maintenance tasks, access is from below. Work is easier.

Easier to maintainLong-life filter lasts about half year * maintenance not required

Note: Intended for use in salons, dining rooms, and ordinary sales floors, this specification is not suitable for kitchens or other harsh environments.

1,590 mm30 mm or more

30 mm or more

* For dust c onc entration of 0.15 mg/m3

For 48NU indoor unit

Non-dew flap without bristles

Easy-clean, flat surfaces

100°

50°

New model

1951,590

42NU 48NU

6801,160

(mm)

Quiet operation has been emphasized even more on the exposed ceiling suspended type unit.

HeightIndoor unit

WidthDepth

Uses new quiet stream fanand other quiet technologies.

Turbulent flow is produced

Non-dew flap

Straightening vane

New quiet stream fan

26NU 36NU21NU

Dehumidification is computer controlled to prevent abrupt and uncomfortable changes in air temperature.

Auto-swing (up&down) brings comfort to the room.

• • • • • • *1 • • •Cooling only

MildewpreventionComfort Work & Servicing Control

features OthersFeatureFeatures

*1Applic able to R 36NU– R 48NU outdoor units

Pre

-ch

arg

ed

fo

r u

p

to

15

m

Lo

ng

-life

fil

ter

Mo

ld

resi

sta

nt

tre

atm

en

t fo

r fil

ter

Au

to-r

est

art

PE

fin

Model Sw

itch

ab

le

fan

sp

ee

d

Au

to

swin

g

Pro

gra

m

"Dry

"

Tim

er

sele

cto

r

Mild

ew

-pro

ofin

g

dra

in

pa

n


40 dB40 dB

(220V)

FH-NU

87

DUCT CONNECTIONMIDDLE STATIC PRESSURE TYPE

45/ 37dB

Digital remote controller

KRC47-2KRC47-4


Remote controller

KRC47-1

Digital remote controller


Remote controller

FDMG36NU(220V)

High Low


FDMG26NU—56NUCooling only

FDMG-NU

Quiet operation

Switchable fan speed: High/Middle/Low

Daikin units are among the quietest you can get. Noise is less likely to detract from the comfort provided by air conditioning.

Drain pipe connection can be done inside the unit. Coolant and drain pipe outlets are at the same opening.

• • •Cooling only

Comfort Control features OthersFeatureFeatures

Au

to-r

est

art

*1

Work & Servicing

Pre

-ch

arg

ed

fo

r u

p

to

15

m

Work & Servicing

Pre

-ch

arg

ed

fo

r u

p

to

10

m

PE

fin

Model Sw

itch

ab

le

fan

sp

ee

d

FDMG26NUIndoor unit High

FDMG42NU 46 dBFDMG36NU 45 dB

42 dB 38 dBLOW

FDMG48NU

FDMG56NU

46 dB

47 dB

37 dB37 dB

37 dB

37 dBFDMG51NU 47 dB 37 dB

Air c onditioner295 mm

Ordinary duc t(proc ured loc ally)

Ordinary duc t(proc ured loc ally)

Air blow Air intake

305 mm or more

Simultaneous air conditioning of two rooms and ventilation grille (ventilation opening)

Ventilation grille

Door-installedventilation grille

Ventilation grille

Wall-installedventilation grille

Under-door c utout

Under-door cutoutWhen air conditioning two rooms simultaneously, the air discharged into each room must be circulated back to the air conditioner. To ensure this, a ventilation duct should be installed for each room or one of the indicated ventilation grilles should be installed on the partitioning wall or under the door between the rooms.

Ventilates air through the partitioning wall. (S ee right)

Partitioning wall

Note: The under-door cutout method should be used only when there is a small volume of air flow.

Ideal for quiet, beautiful living spacesSuitable for condominiums and apartments, houses and hotels, and similar living areas

DUCT CONNECTIONLOW STATIC PRESSURE TYPE

FDBG18NU—26NUCooling only

FDBG-NU

Handy

Superior freedom of layout

Small, lightweight, and easy-to-install outdoor unit.

• • •Cooling only

Comfort Control features OthersFeatureFeatures

Au

to-r

est

art

• •

PE

fin

Ad

just

ab

le

ext

ern

al

sta

tic

pre

ssu

re

Model Sw

itch

ab

le

fan

sp

ee

d

Unit can be mounted in the ceiling and air can be delivered freely by duct.

Quiet operation

DurableTo achieve increased durability by improved resistance to salt corrosion and atmospheric pollution, coated PE fins (with special acryl pretreatment) are used for the heat exchanger of the outdoor unit.

The duct system allows the most efficient location of discharge outlets in accordance with the room layoutMedium static pressure type, usable in a larger than standard spaceDuct connection is simpler with standard rear intake chambers

S uc tion c hamber

Air filter[Duc t c onnec tion]

To prevent increased operation noise, avoid installing the air suction grille directly below the suction chamber.

FDBG18NU 41 dB 38 dBFDBG21NU 43 dB 40 dBFDBG26NU 43 dB 40 dB


43/ 40dBFDBG26NU

(220V)

High Low


*1Applic able to R 36NU– R 51NU outdoor units

(220V)

(220V)

or moreor more

KRC47-2KRC47-4

KRC47-1

Fitted with wide inlet fan (Applies to R26NU–51NU)

Curved Super Aero Grille restricts the spread of exhaust gas and fits in the same space as previous outdoor units.

Fitted with Super Aero Grille (Applies to R26NU–51NU)

Equipped with scroll compressor for quieter operation

Even less operation noise

Wide inlet fan

Allowable refrigerant pipe length and height difference

Max. length Max. heightdifference

Pre-charged*1

R26NU

R36NU 30 m(Equivalent length 50 m)

30 m

R18NU 30 m

R21NU 30 m

30 m(Equivalent length 50 m)


R42NU

R48NU

R51NU

Note: 1Additional refrigerant charging is required if the refrigerant pipe is longer than the indicated length.

(Applies to R36NU–56NU)

ConstructionNon-treated fin

PE fin

Aluminium

11 5-6 5-6

Greater of corrosion resistance Against acid corrosion Against salt corrosion

Non-treatedfin

Non-treatedfin

PE fin PE fin

Corrosionresistance grade

AluminiumC orros ion res is tantac rylic res in

Hydrophilic film

Neighbor-friendly

500

50

(mm)

50 m(Equivalent length 70 m)R56NU


109

OUTDOOR UNIT

Quiet Operation

Fully shaped aerodynamic propellers are designed to push air with a large wing surface. This provides both high blow volume and quiet operation with minimal turbulence.

Slim-design and low-profile compact outdoor units (Applies to R26NU–51NU)

Easily replaceable

Compact

Compactly designed outdoor unit with interior layout optimized for the smooth flow of air.

Smooth running, minimal vibration, low operating noise

To suppress turbulence and achieve quiet operation, the curved ribs of the grille are optimized to meet the outflow of air.

Pre-charged for up to 15 meters (Applies to R36NU–51NU)

Smoother and easier

Installation and maintenance

If refrigerant piping length does not exceed 5m (R56NU), 10m (R18NU,R21NU, R26NU), 15m (R36NU, R42NU, R48NU, R51NU), there is no need for on-site gas charging.

Heat exchange fins provided with anti-corrosion treatment

Takes installation environment into consideration

Durability

To achieve increased durability by improved resistance to salt corrosion and atmospheric pollution, coated PE fins (with special acryl pretreatment) are used for the heat exchanger of the outdoor unit.

4-direction piping affords more freedom of layout (Applies to R26NU–56NU)

Piping can be run from the front, bottom, right or rear surface according to how the unit is installed.

R36NUR26NU R42NU R48/51NU

10 m

15 m

10 m

10 m

15 m

15 m

5 m

15 m

15 m

20 m

15 m

15 m

20 m

20 m

20 m

20 m

Outdoor unit Sound levelR36NUV1R36NUY1 55 dBR42NUY1 57 dBR48NUY1 59 dBR51NUY1 59 dB

(In case of V1: 220V, Y1: 380V)

Air discharge direction angle can be set (fixed setting)

Dehumidification is computer controlled to prevent abrupt and uncomfortable changes in air temperature. Useful for reducing discomforting humidity without uncomfortable cooling of the room.

Operation starts when the preset time of the ON timer elapses and stops when the preset time of the OFF timer elapses.

Sanitary filter has mold-resistant treatment.

Mildew proofing maintains hygiene by preventing growth in highly humid conditions.

Steeper gradient ensures more efficient wastewater drainage. High-lift is especially useful for long lengths of drain piping.

Maintenance is not required for one year (two years when a ceiling mounted cassette type is used).

If refrigerant piping length does not exceed 30 m, there is no need for on-site gas charging.

If there is a power outage while the equipment is operating, operations will restart in the same mode as before the power cut when electricity is restored.

Delivers comfortable air-conditioning to all areas, near to and far from the air-conditioner.

High setting provides maximum reach while low setting minimizes drafts.

To achieve increased durability by improved resistance to salt corrosion and atmospheric pollution, coated PE fins (with special acryl pretreatment) are used for the heat exchanger of the outdoor unit.

Abundance of functions that provide comfortable air-conditioning in stores and offices. See the list of main functions given on the page introducing each indoor unit.

The filter sign warns you when it is time to clean the filter. *When using a wired remote controller the sign is displayed in the LCD. When using a wireless remote controller the filter sign lamp illuminates on the signal receiver unit.

Auto-swing

Program "Dry"

Timer selector

Mold-resistant treatment for filter

Mildew-proofing drain pan

Drain water lift-up mechanism

Long-life filter

Pre-charged for up to 30 meters

Auto-restart

Switchable fan speed

PE fin

Filter sign

(1) Air flow range in standard position

(2) Air flow range in draft prevention position

(3) Air flow range in ceiling soiling prevention position

(draft prevention, standard, ceiling soiling prevention)

Note:When units are installed on high ceilings, depending on the model, various restrictions concerning maximum height, air discharge direction, and choice of options may apply.

You can freely set 3 air flow positions by remote controller.

Swing pattern selection

Delivers air-conditioning comfort all the way down to the floor in air-conditioning zones with high ceilings.

High-ceiling application

Daikin's innovative air discharge mechanism keeps air flow away from the ceiling. Ceiling cleaning is less frequently required.

Ceiling soiling prevention function

Two types are available: 65% and 90% colorimetry. Superior filtering ratio easily meets building maintenance laws.

High-efficiency filter unit

Requires no maintenance for about 4 years* (10,000 h) in stores and offices. * For dust concentration of 0.15 mg/m3

Ultra long-life filter

You can provide air-conditioning with fresh air from outside. Convenient for places where a ventilation fan cannot be installed.

Fresh-air intake kit

C o m f o r t

M i lde w pr e v e n t io n

O t h e r s

W o r k a n d S e r v ic in g

C o n t r o l fe a t u r e s

O pt io n s

39 40

DUCT CONNECTION MIDDLE STATIC PRESSURE TYPE

Note : 1Nominal cooling capacities are based on the following conditions: 1aReturn air temp., 27°CDB, 19.5°CWB; outdoor temp. 35°CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 1bReturn air temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 2Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.

3In case of V1: 220V, Y1: 380V.

----------

36,500/36,00010.7/10.6

9,200/9,100

305X1,550X68052

2.0(Charged for 15 m)

1,170X900X32081 (V1), 79(Y1)

42,700/42,00012.5/12.3

10,800/10,600

305X1,550X68052


1,170X900X32087

49,100/48,00014.4/14.1

12,400/12,100

305X1,550X68052

Hermetically sealed scroll type


1,345X900X32092

Both liquid and gas piping

Cooling capacity 1a/1b kWBtu/hkcal/h

kWPower consumption 1a/1b

°CDB

°CWBOperation range

ModelName

Indoor unit

Outdoor unit

Dimensions (HXWXD) mmSound level (H/L) (220V) 2 dBA

Refrigerant charge (R22) kgSound leve 2, 3 dBADimensions (HXWXD) mmMachine weight kg

Piping connections

mmLiquid (Flare)

Heat insulation

mmGas (Flare)mmDrain Indoor unit

Outdoor unit

kg

Air flow rate (H)Fan m3/mincfm

Outdoorunit

mm

Operation range

Max. interunit piping length mm

Machine weight

Indoorunit

Colour

Max. installation level difference 2030 (equivalent length 50 m) 50 (equivalent length 70 m)

Ivory

Colour

Power supply V1: 1 Phase, 220–240 V, 50 Hz Y1: 3 Phase, 380–415 V, 50 Hz

kWMotor outputCompressor Type

o/ 9.5o/ 19.1

o/ 9.5o/ 19.1

o/ 9.5o/ 19.1

o/ 26.0 (Hole) o/ 26.0 (Hole) o/ 26.0 (Hole)

52,200/51,00015.3/15.0

13,200/12,900

305X1,900X68058

2.7 (Charged for 15 m)

1,345X900X32093

o/ 9.5o/ 19.1

o/ 26.0 (Hole)

57,000/56,00016.7/16.4

14,400/14,1006.5/6.45

305X1,900X68058

2.8 (Charged for 5 m)

1,345X880X370114

o/ 9.5o/ 19.1

I.Do/ 21.6XO.Do/ 27.2 I.Do/ 21.6XO.Do/ 27.2 I.Do/ 21.6XO.Do/ 27.2 I.Do/ 21.6XO.Do/ 27.2 I.Do/ 21.6XO.Do/ 27.2o/ 26.0 (Hole)

4.12/4.16 4.85/4.84 4.66/5.55 4.9/5.9

371,306

421,482

421,482

421,482

421,482

45/37 46/37 46/37 47/37 47/37

14 to 25

3.00 3.75 4.50 4.50 4.50

55 57 59

21 to 46

59 56

26FDMG26NUV1

36FDMG36NUV1

42FDMG42NUV1

48FDMG48NUV1

R36NUV1R36NUY1

R26NUV1R26NUY1 R42NUY1 R48NUY1

51FDMG51NUV1

R51NUY1

56FDMG56NUV1

R56NUY1



°CDB


ModelName

Indoor unit

Outdoor unit

Dimensions (HXWXD) mmSound level (H/L) (220V) 2 dBA

Refrigerant charge (R22) kg

Sound leve 2, 3 dBADimensions (HXWXD) mmMachine weight kg

Piping connections

mmLiquid (Flare)

Heat insulation


Outdoor unit

kg

Air flow rate (H)

Fan Driving system

m3/mincfm

Outdoorunit

mm

Operation range

Max. interunit piping length mm

Machine weight

Indoorunit

Colour

Max. installation level difference

R18NUV1 R21NUV1 R26NUV1R26NUY1

Colour

Power supply


DUCT CONNECTION LOW STATIC PRESSURE TYPE

Note : 1Nominal cooling capacities are based on the following conditions: 1aReturn air temp., 27°CDB, 19.5°CWB; outdoor temp. 35°CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 1bReturn air temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 2Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.

3In case of V1: 220V, Y1: 380V.

18FDBG18NUV1

21 26FDBG21NUV1 FDBG26NUV1

1211

V1: 1 Phase, 220–240 V, 50 Hz Y1: 3 Phase, 380–415 V, 50 Hz

Hermetically sealed scroll type3.002.0

1,170X900X32081 (V1), 79 (Y1)

3.752.4

1,170X900X32087

4.502.6

1,345X900X32092

2030 (equivalent length 50 m)

(Charged for 15 m) (Charged for 15 m) (Charged for 15 m)

o/ 9.5o/ 19.1

o/ 9.5o/ 19.1

o/ 9.5o/ 19.1


55 57 59

21 to 46



°CDB


ModelName

Indoorunit

Indoor unit

Outdoor unit

Dimensions(HXWXD)

Colour

mmmm

Sound level (H/L) (220V) 2 dBA



Unit

Piping connections

mmLiquid (Flare)

Heat insulation


Outdoor unit

Decoration panel

UnitDecoration panel

Machine weight kgkgUnit

Decoration panel

Air flow rate (H) m3/mincfm

Outdoorunit

Colour

mm

Operation range

Max. interunit piping length mmMax. installation level difference



White

Ivory white Ivory

18FHC18NUV1

R18NUV1

21FHC21NUV1

R21NUV1 R42NUY1

26FHC26NUV1

R26NUV1R26NUY1

36FHC36NUV1

R36NUV1R36NUY1

331,164

288X840X840

28

42FHC42NUV1

R48NUY1

48FHC48NUV1

331,16442/3642/36

288X840X84040X950X950 40X950X950

285 5


331,16442/36

288X840X84040X950X950

285

----------

14 to 25


Note : 1Nominal cooling capacities are based on the following conditions: 1aReturn air temp., 27°CDB, 19.5°CWB; outdoor temp. 35°CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 1bReturn air temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB. Equiv. refrigeration piping, 7.5 m (horizontal).2Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.

3In case of V1: 220V, Y1: 380V.

I.Do/ 25XO.Do/ 32 I.Do/ 25XO.Do/ 32 I.Do/ 25XO.Do/ 32

White

Ivory Hermetically sealed scroll type

36,500/36,00010.7/10.6

9,200/9,100

46/40195X1,590X680

35

3.002.0

1,170X900X32081 (V1), 79 (Y1)

42,700/42,00012.5/12.3

10,800/10,600

48/42195X1,590X680

35

3.752.4

1,170X900X32087

49,100/48,00014.4/14.1

12,400/12,100

49/43195X1,590X680

35

4.502.6

1,345X900X32092


Both liquid and gas piping20

30 (equivalent length 50 m)



ModelName

Indoorunit

Indoor unit

Outdoor unit

Sound level (H/L) (220V) 2 dBA



Machine weight kg

Operation range °CDB

Operation range °CWB

Piping connections

mmLiquid (Flare)

Heat insulation


Outdoor unit

Air flow rate (H) m3/mincfm

Outdoorunit

Colour

mm

Dimensions (HXWXD)

Colour

mm

Max. interunit piping length mmMax. installation level difference

(Charged for 15 m) (Charged for 15 m) (Charged for 15 m)


Note : 1Nominal cooling capacities are based on the following conditions: 1aReturn air temp., 27°CDB, 19.5°CWB; outdoor temp. 35°CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 1bReturn air temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB. Equiv. refrigeration piping, 7.5 m (horizontal).2Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.

3In case of V1: 220V, Y1: 380V.*Gray text indicates tentative values.

I.Do/ 20XO.Do/ 26 I.Do/ 20XO.Do/ 26 I.Do/ 20XO.Do/ 26

o/ 9.5o/ 19.1

o/ 9.5o/ 19.1

o/ 9.5o/ 19.1


4.61/5.504.84/4.834.02/4.06

321,129

381,341

421,482

14 to 25

55 57 59

21 to 46


26FH26NUV1

R48NUY1R42NUY1

36FH36NUV1R36NUV1R36NUY1

R26NUV1R26NUY1

21FH21NUV1

R21NUV1

42FH42NUV1

48FH48NUV1

Hermetically sealed rotary type1.71.20

49540X750X270

42

2.21.50

54 57685X800X300

61

1530

(Charged for 10 m) (Charged for 10 m)

o/ 6.4o/ 15.9

o/ 6.4o/ 15.9

o/ 18.0 (Hole) o/ 18.0 (Hole)

2.52.3

770X900X32070 (V1), 69 (Y1)

(Charged for 10 m)

o/ 9.5o/ 15.9

o/ 26.0 (Hole)I.Do/ 25XO.Do/ 32 I.Do/ 25XO.Do/ 32 I.Do/ 25XO.Do/ 32

15529

230X840X840

24

19670

230X840X840

24

19670

230X840X840

24

33/29 35/30 35/30

40X950X950 40X950X950 40X950X950

5 5 5

Hermetically sealed rotary type2.2

1.50

54 57685X800X300

61

1530

(Charged for 10 m)

I.Do/ 20XO.Do/ 26

o/ 6.4o/ 15.9

o/ 18.0 (Hole)

2.52.3

770X900X32070 (V1), 69 (Y1)

(Charged for 10 m)

I.Do/ 20XO.Do/ 26

o/ 9.5o/ 15.9

o/ 26.0 (Hole)

21,200/21,0006.2/6.2

5,340/5,290

22776

44/40 44/40195X1,160X680

26

26,300/26,0007.7/7.6

6,630/6,550

6.19/6.15 7.62/7.60

36,500/36,00010.7/10.6

9,200/9,10042,700/42,000

12.5/12.3

10,800/10,60049,100/48,000

14.4/14.1

12,400/12,100

4.0/4.04 4.8/4.79 4.6/5.49

18,100/18,0005.3/5.3

4,580/4,56021,200/21,000

6.2/6.2

5,340/5,29026,300/26,000

7.7/7.6

6,630/6,550

5.25/5.21 5.93/5.89 7.59/7.57

22776

195X1,160X68026

Ivory white

2.5Hermetically sealed rotary type


770X900X32070 (V1), 69 (Y1)

o/ 9.5o/ 15.9

I.Do/ 21.6XO.Do/ 27.2

15

o/ 26.0 (Hole)30

57

26,300/26,0007.7/7.6

6,630/6,5507.67/7.65

Hermetically sealed rotary type1.7

1.20

49540X750X270

42

2.21.50

54685X800X300

61

1530

(Charged for 10 m) (Charged for 10 m)

o/ 6.4o/ 15.9

o/ 6.4o/ 15.9

o/ 18.0 (Hole) o/ 18.0 (Hole)


2.52.3

770X900X32070 (V1), 69 (Y1)

(Charged for 10 m)

o/ 9.5o/ 15.9

o/ 26.0 (Hole)

57

21 to 46

18,100/18,0005.3/5.3

4,580/4,56021,200/21,000

6.2/6.2

5,340/5,29026,300/26,000

7.7/7.6

6,630/6,5502.12/2.11 2.73/2.72 3.33/3.33

3/4B

----------13

458

41/38260X900X580

23

18635

43/40260X1,300X580

31

18635

43/40260X1,300X580

3114 to 25

Direct drive (2 speed)

Ivory white Ivory

23811

42/38305X1,350X680

43

D I M E N S I O N S (Unit: mm)

The Front

(Service space)30 or more

(Service space)30 or more

4-M8~M10Hanging bolt

(Note.2)Brand name plate

Position slit hole for taking out in piping back

(For left piping)Drain pipe connection VP20

80 80

225

275

170105

170

127

142 58

36

85 160

192102

185

10590

210

260

195

300

275

105

135

5

For h

eight

instal

laion

300 o

r more

(Requi

red sp

ace)

From t

he floo

r side

2500 o

r more

ObstacleFloor side

55

680

515

5

145 60

6511

560

65

135

40 50 60

912

13 15590

40

11

14

15

18 17 16

10

5

4

42

6

57

1

6

8

3

123456789101112131415161718

Position : Hole of wall for taking out in piping back(View from the front)

(View from the front)

o/ 45 55

80

(Hanging position)A

B

(Han

ging

p

ositi

on)

Air discharge grilleAir suction grilleAir filterGas pipe connectionLiquid pipe connection Drain pipe connecitonEarth terminal (inside the electric components box) (M4)Suspension bracketBackward piping and wiring connection opening lidUpward piping and wiring connection opening lidRight side pipe connection Left back drain pipe connection Left side drain pipe connection Right side drain pipe connection Hole of wall for taking out in piping back Upward drain pipe connection Upward gas pipe connection Upward liquid pipe connection

Notes:1

2

3

(Req

uired

spac

e)

(Req

uired

spac

e)

A B1120 11601120 1160

FH21NUV11120 1160FH26NUV11550 15901550 15901550 15901550 15901550 1590

FH36NUV1FH42NUV1FH48NUV1


1413

Location of unit's Name Plate: Bottom of fan housing inside the suction grille.In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote controller in detail.The remote control code is the standard <about 3 m outside the machine> attached.(0.5 mm2 2 wicks O.D. 5.4)(It is attached to VRV.)


295

3010

40A B

150

125

8405584055

240 260270315

5555

150

950

950420

420

750

200

300 or less

80

80

60

75

160

40

110

95

85

165

80

350

85

40

350

E

80

C

viewC

2 100=200

C

Branch ductconnection

12-M4 Hole(prepared hole)


2 100=200

(prepared hole)4-M4 Hole

(direct installation type)

For fresh air intake kitconnection

1500mm or more

When the discharge grill is closeout,the required space is200mm or more.

1500mm or more

1500mm or more1500mm

or more

Required space

Required space

Requ

ired

spac

e

viewB

Suspensionbolt

viewA

Note3.

780

Susp

ensi

on p

ositi

on

680 Suspension position

1000

or m

ore

B

A

D

8

910

4

3

25

6

1

7

Adjus

table(

0~55

0)

4-M8 M10

860~890 Ceiling opening

860~

890

Cei

ling

open

ing

5584055

150

40

165

155

85

195

80

350

14-M4 Hole(prepared hole)


2 100=200

Requ

ired

spac

e10

00 o

r mor

e

A

5040Notes:1Location of unit's Name Plate For Main body: Switch Box Cover inside surface of suction grille. For decoration panel: Panel frame inside surface of suction grille.2When installing an optional accessory, refer to the installation drawings. For fresh air intake kit Inspection port is necessary. For high efficiency filter unit Inspection port is not necessary.3In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote controller in detail.

Liquid pipe connectionGas pipe connectionDrain pipe connectionPower supply connectionRemote control code and control wiring connectionAir discharge grilleAir suction grillePort for water supplyCorner decoration coverDrain hose

12345678910

C165195

A230288

B240298

D----165

E----195[FHC36NUV1-48NUV1]

FHC18NUV1-26NUV1FHC36NUV1-48NUV1

[FHC18NUV1-26NUV1]


Outdoor units

KIS95-------Drain piping kit -------

Kit nameName of option Remark


Indoor units

KRC47-1KRC47-2

KDGF19A71KKD19A1

Remote controllerDigital remote controller

KRC47-4Digital remote controller for duct heater useSuction grilleDrain pan cover

Note: 1Wiring for wired remote controller to be procured locally.


Replacement long-life filterL-type piping kit (for upward direction)Remote controller

Resin net

Wireless typeWired type1

FDBG18NU FDBG21NU FDBG26NU

DUCT CONNECTION MIDDLE STATIC PRESSURE TYPEKit nameName of option Remark

KRC47-1KRC47-2

Remote controller

KRC47-4Digital remote controller for duct heater useDigital remote controller

FDMG26NU FDMG36NU FDMG42NU FDMG48NU FDMG51NU FDMG56NU

FH21NU FH26NU FH36NU FH42NU

KHFJ5F160

FH48NU

FHC18NU FHC21NU FHC26NU FHC36NU FHC42NU FHC48NU

KAFJ501D160KAFJ501D80KHFJ5F80

-------Central drain plug KKPJ5F180

KHFJ5F80 BRC1NU61BRC7NU66


CEILING MOUNTED CASSETTE TYPEKit nameName of option Remark

Decoration panel

Fresh air intake kit Without the T-joint pipe and fanWith the T-joint pipe,without fan

Direct installation type

Chamber type

Sealing member for air discharge outletPanel spacer

Chamber connection kit2

Note: 1Wiring for wired remote controller to be procured locally.21Installation box for adaptor PCB (KRP1B98) is necessary.

High-efficiency filter

High-efficiency filter chamber Replacement long-life filter

(Colorimetric method 65%)(Colorimetric method 90%)

Replacement high-efficiency filter

(Colorimetric method 65%)(Colorimetric method 90%)

Remote controller Wired type1

Wireless type

Ultra long-life filterReplacement ultra long-life filterBranch duct chamber

BYC125K-W1

KDDFP55D160

KDBHJ55K160

KDDP55D160

KDDFJ55K160

KDDJ55K160KDDJ55K160K KDDP55D160K

KDDJ55X160

KAFJ551K160KAFP55D160KAFJ55K160H

KAFJ556K80KAFJ557K80

KAFP556D160KAFP557D160

KDJ55K80 KDJ55K160BRC1C61

BRC7C613W

KKSJ55K160

--------------

-------

KDBP55H160WA

KAFP552H80 KAFP552H160KAFP553H80 KAFP553H160

R18NU R21NU R26NU R36NU R42NU R48NU R51NU R56NU

KDGF19A45

Central remote controllerUnified ON/OFF controllerSchedule timerAdaptor for wiring2

Wiring adaptor for electrical appendices2

Interface adaptor for SkyAir seriesInstallation box for adaptor PCB

DCS302CA61DCS301BA61DST301BA61

KRP1B57KRP4A53

DTA102A52KRP1B98


DUCT CONNECTION MIDDLE STATIC PRESSURE TYPE

[FDMG26NUV1]

[FDMG36NUV1/42NUV1/48NUV1/51NUV1/56NUV1]

D

5

1121

50

A

274

7XP150=1050

M

212

2

263

4

150

10

F1137

305

1

146

116

3

8

280

1153

29

C

3

151

E

8 126

76

152

427

1350

600

H

55

680

206

151

16

175

G

51

123

74B

381

16

305

Liquid pipe connection Gas pipe connectionDrain pipe connectionGround terminal

1234

Note: 1Location of unit's Name Plate: Chamber cap

Switch boxControl wiring intake (for remote controller)Control wiring intake (for outdoor unit)Suspension bracket

5678

(Suspension bolt pinch)

(Sus

pens

ion

bolt

pinc

h)

(All around)

(All around)20-M4 Holes

(All around)N

300 or more

Service space

1550

A B C E F HG

1353 1403 1314 7XP150=1050 82718-M4HolesFDMG36NUV1/42NUV1/48NUV1

FDMG51NUV1/56NUV1 1900 1703 1753 1664

D

13341684 9XP150=1350 82722-M4

Holes

FDMG26NUV11550

I J K M N1353 1337 7XP150=1050 20-M4

HolesFDMG36NUV1/42NUV1/48NUV1FDMG51NUV1/56NUV1 1900 1703 1687

L13211671 9XP150=1350 24-M4

Holes

51

151 J

280

150

8

263

305

L

I

10

K

74

16

16

1350 1153 1203 1114 7XP150=1050 72718-M4Holes1134

Holes for anchor bolts(M8 or M10)

3-Drain outlets

Service portMinimum space for air passage

Name plate

Earthterminal(M4)

Power intake

Gas stop valve

Liquid stop valve

237

100

150

50

A

H

290

306

213

48

95

700

750 270

540

105 58

520190170 27

60

530 100 3472

34 27

50

50

A

15

OUTDOOR UNIT // R18NUV1

OUTDOOR UNIT // R21NUV1

H 1000H 1000

Minimum space for air passage

685 64

5

800

75 100

50

50

100

A50

A

150

H

Gasstop valve

Gas pipe

Service port

9570

A300600

H

Less than 1000More than 1000

Space AMore than 300More than 600

H

30015

Liquid pipeLiquidstop valve

Name plate

Power intake

Earth terminal (M4)

Outdoor air thermostat

1615

Terminal cover

130

330

540

350

269

3198

2-Drain outlet

Holes for anchor bolts (M8 or M10)


Liquid pipe connection Gas pipe connectionDrain pipe connectionGround terminal

1234 Note: 1Location of unit's Name Plate: Chamber cap

Switch boxControl wiring intake (for remote controller)Control wiring intake (for outdoor unit)Suspension bracket

5678

AB 151

C(Suspension bolt pinch)

DE

167

228

260

236

1021

916

150

52

17011

0

107

134

164

260

50

137

5550

0(S

uspe

nsio

n bo

lt pi

nch)

317

580

271

F

GN(All around)

291610O

(All around) 151

JI

300 or more

10 or

more

H

KLM

126

3

8

3

16 7

542

Service space

A B C F G I900

FDBG21NUV1/26NUV1 1300704

1104755

1155

D684

1084

E664

10643XP150=450 500 3XP150=450 674 688 704 900 10-M4

Holes12-M4

Holes

6XP150=900 700

H127102 6XP150=900 1074 1088 1104 1300 16-M4

Holes18-M4

Holes

FDBG18NUV1J K L M N O

D I M E N S I O N S

1817

(Unit: mm)D I M E N S I O N S (Unit: mm)

OUTDOOR UNIT // R26NUV1/Y1

OUTDOOR UNIT // R36NUV1/Y1

Gas pipe connection Liquid pipe connection Service port(in the unit) Grounding terminal Refrigerant piping intake Power supply wiring intake Control wiring intake Drain pipe connection

12345678

Note: In some circumstances, with certain machine types, it may not be possible to attach the supplied piping.

350

3032

030

6148(345

~355

)

30

140 62096

41

140

3

4

2

1

7

7

6

6

5

5

5

8

1170

24

8960

5495

157.

541

0 435

142

89 19

900

117 58

16

102

70

45

1671

376 191

5495 55

84

19 80

145

Hole for anchor bolt 4-M12

OUTDOOR UNIT // R42NUY1and R48NUY1and R51NUY1

Gas pipe connectionLiquid pipe connectionService port (in the unit)Grounding terminal M5 (in switch box)Refrigerant piping intakePower supply wiring intakeControl wiring intakeDrain pipe connection

12345678

96

89

58

1

16

24 54

350

(345

~355

)

3

71

45

145

41

76

95

620

60

5

95

4

89

320

8

84

48

70

410

54

A

30

80

30

102

140

55

19C

900

5

5

376

435

19

140

6

61

117

142D

2

191

7

30

16


A

R42NUY1

R48NUY1/51NUV1

1170

1345

B

54

55

C

113

—

D

579

—

Gas pipe connectionLiquid pipe connectionService port(in the unit)Grounding terminal M5(in switch box)Refrigerant piping intakePower supply wiring intakeControl wiring intakeDrain outlet

12345678

OUTDOOR UNIT // R56NUY1

432

5

5

5

8

5

6

6

7

71

Hole for anchorbolt 4-M12

396

1345

24

60 568

95

8460

144

4984

275

9549

611140

538

370

3030

35

146

30

584

880

150

8438

90 name plate

14137

11102

14 67 14 90115

391

7

6

5

567

223

67

148

54

13

52

53

67

B

95

13

223

52

350

48

30

770

28 8960

5495

5495

539555

5522

3

84

143

329

352

117 58

16

102

70

320

3055

(345

~355

)

30140

45

1671142

89 19 19 52

13 67

80145

376 191

62096

40

140900 3

216 6

5

454

4

7

Note: In some circumstances, with certain machine types, it may not be possible to attach the supplied piping.


Gas pipe connectionLiquid pipe connectionGrounding terminal M5(in switch box)Refrigerant piping intakePower supply wiring intakeControl wiring intakeDrain connection

1234567

H

L

500 or more

<1000>

50(100)

or more

1000 or more

<1500>

200(300)

or more

L H

L H

L H

[Space required for outdoor unit installation] (Unit: mm)Dimensions inside brackets [ ] indicate case where air direction adjustment guide is adjusted downward.

For R26NU-56NU

200(300) or more

1000 or more

200 or more

100 or more

100 or more100 or more

50(100) or more

1000 or more

100 or more

500 or less

1000

or m

ore

500 or more

150 or more

150 or more 150 or more

500 or less

1000

or m

ore

200(300) or more

1000 or more

200 or more

500 or less

1000

or m

ore

500 or less

500 or more

1000

or m

ore

500 or less

1000 or more

1000

or m

ore

When there is an obstruction on the inlet side

When the obstruction on the outlet side is higher than the unit itself (There is no limit to the height of the obstruction on the outlet side.)

When there are obstructions on both the inlet and outlet sides

When there is an obstruction on the outlet side

When there are obstruc tions on the inlet s ide and both lateral s ides

2. For series installation (more than two units)

When there are obstruc tions on both s ides

Pattern 1

When the overhead space is open

1. For single unit installation When there is an obstruc tion only on the inlet s ide

When there is an obstruction in the overhead space


When there are obstruc tions on both s ides

When there is an obstruction in the overhead space

When there is an obstruc tion on the inlet s ide

When there are obstruc tions on the inlet s ide and both lateral s ides


1. For single unit installation








An obstruc tion in the overhead spac e





Wired type

Staple17

17

0~5

117

17(fl12~fl16)

•Remote controller installation procedure

A EXposed body, exposed cord

C Exposed body, embedded code

( Distance between remote controller and control box )

B Exposed body, embedded cord

Conduit

CONTROL BOX

Through hole

Size

Specifications of cord

0.75~1.25 mm2

Total length 500 m

Type Vinyl cord with sheath or cable (Insulated thickness: 1 mm or more)

Note) 1. Remote controller cord and staple are not attached. they are field supplied parts.

Note) The dimension of hole.

* Countries requiring EMC: Shield wire (insulated thickness: 1 mm or more)

120

120

17 18

42

84

38

Cord outlet hole2823

46

•Remote controller dimensions

REMOTE CONTROLLER

Wireless type• Remote controller dimensions

BRC7C613W

BRC1C61 BRC1NU61

KRC47-2 / KRC47-4 KRC47-1

BRC7NU66

• Remote controller holderinstallation procedure<Installation to wall surface>

Transmitting part

157

62 17.5

Liquid crystalremote controller(Wireless)

Remote controllerholder

120

72 83.5

106

(Ceil

ing op

ening

)

70 180.5

35 49

Service space for ceiling installation

• Receiver detail

Note :

Mor

e th

an 9

0(S

revi

ce s

pace

)

(Ceiling opening)

2-5x9 Slot

Switch box(field Supplied parts)

Do not install more than 3 receivers in the vicinity of one another.With 4 or more units, there is always the possibility of malfunction


2019

The values represent the case for the R26 type through R56 type. The dimensions in ( ) are for the R36 and R56 type (The unit values is mm. )In case of R56 model, the values in < > are those when the air discharge direction of the grille is downward.



•Receiver installation procedure • Receiver detail

Receiver

Decoration panel

Drain pipingside

Refrigerantpiping side

•Receiver installation procedure • Receiver detail

A

22

38

6

A

41

13

A25R2

7

B

44.5

10

20

B

A

25

25 17

41.5

7

A

B

111

119

246

Hole type

a

10

20

4

B

a (mm)

ReceiverThe Front

• Remote controller holderinstallation procedure<Installation to wall surface>

Transmitting part

115.

5

54 18.1

Remote controller(Wireless)

Remote controllerholder

25 18

14

110 110

19

32

58

92

61

27 28

71

Pcs 0626

Documents

Transcript of Pcs 0626