PCI and PCMCIA Cards - Rapticalraptical.com/pdfdocs/PCIandPCMCIA.pdf · PC0035 EXPRESS CARD GIGABIT...
Transcript of PCI and PCMCIA Cards - Rapticalraptical.com/pdfdocs/PCIandPCMCIA.pdf · PC0035 EXPRESS CARD GIGABIT...
FPC-0106TX PCMCIA 10/100MBPS 32BIT iPORT PC CARDBUS ADAPTER € 25.65 +VATComplies with PCMCIA CardBus standard
Comples with IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX
32-Bit Bus-Mastering Data Transfer
10/100Mbps data rates auto-negotiation
Supports Full-Duplex and Half-Duplex
PC Card hot swap supported
PC0035 EXPRESS CARD GIGABIT NIC € 14.85 +VATNetwork card for installation in notebook
Installation: Express Card
Supports 10/100/1000 Mbps, IEEE 802.3,802.3 from, 802.3u, 802.1q
Chipset: Agere MET1310
Full Duplex: 20/200/2000 Mbps
Connections: 1x RJ45
Express Card 34 Standard
Compatible to 1-Lane PCI-Express
ROHS Compliant, FCC, CE
CBU2200N PCMCIA CARDBUS 2 PORT USB VER. 2.0 (480MBPS) € 24.30 +VATCHIPSET NEC UPD720100
Sunix's CBU2200N is a high-speed 480 Mbps USB 2.0 cardbus supporting the new USB 2.0
peripherals and all the existing USB 1.1 devices. Our CardBus's circuit design not only provides
the best current protection, but also adds switch regulator which allowing you connect variety
of devices, like mouse,hub... without using external power. This thoughtful design adds the
convenience while you are having the meeting or traveling outside. The card is an ideal choice
for external storage devices, MP3 players, external writer, digital cameras,
webcam, networking and video devices, and all other USB devices.
Two USB 2.0 ports
EHCI based 480 Mbps USB 2.0 compliant
OHCI based 12 Mbps USB 1.1 compliant
USB ports auto speed selectable
Each port supplies 500mA power
Supports both USB 2.0 & 1.1 devices
Easy plug & play installation and device connection
Fully backward compatible with USB 1.1/1.0 devices
Supports Windows 98SE / ME / 2000 / XP / 2003 / 64bit-OS / Vista and Mac O.S.
Chipset: NEC UPD720101
OS Support: Windows 98SE / ME / 2000 / XP / 2003 / 64bit-OS / Vista , Mac 10.x and later
PCI and PCMCIA Cards
CBF2000G PCMCIA CARD BUS FIREWIRE 2 X 1394 PORT (400MBPS) € 31.05 +VATSunix's CBF2000, an IEEE1394 cardbus, provides high performance
serial connectivity for your laptop. The cardbus provides you with two
FireWire ports for connecting IEEE1394 compliance devices likes DV
camcorders, digital camera, external storage devices, and more.
Supports 100, 200 and 400 Mbps data transfer rate. The FireWire
is ideal for capture high quality streamlined video into
your computer for editing and publishing.
Two FireWire ports. Data transfer rates up to 100/200/400 Mbps
Link up to 63 devices, Supports 32-bit cardbus
Easy plug & play installation and device connection
Chipset : VIA VT6306
OS Support: Windows 98SE / ME / 2000 / XP / 2003 / 64bit-OS / Vista , Mac 8.6 and later
LL-166 PCMCIA CARDBUS INTERFACE 1-PORT PARALLEL € 40.50 +VATCompliant with PC Card 34 bit CardBus Type II Slot
Easy Plug & Play installation
Supports Windows 2000/2003/XP/XP-64bit/Vista, Linux, Mac OS
CardBus IRQ Sharing Feature eliminates IRQ conflicts
Provides one DB25 female connector
One IEEE1284 SPP/ECP/EPP Parallel port
Works with major types of Parallel I/O peripherals
CBS2009 2 PORTS RS-232 CARDBUS € 60.75 +VATIs a 2-port RS-232 PCMCIA Type II 32-bit PC card that widely
used in varieties of portable systems. It’s designed with SUNIX
high performance and realizable single chipset quad UARTs,
UL7512EQ and as well built with many of SUNIX advanced
features and technologies, Each port offer data transfer rate
up to 230.4 Kbps with built-in 32-byte FIFO buffer to give you
maximum system performance and efficiency.
CBS2009 also provides full modem control signals to ensure
compatibility with kinds of RS-232 peripherals.
It’s created for use in the industrial sector and as well ideal
for home or office uses. This Card Bus is your best solution
to utilize the peripheral with serial port in an easy-to-use environment
such as plug-n-play and hot-swapping function.
High reliability SUNIX UL7512EQ 16C750 compatible UART controller on-board.
Expands 2 independent RS-232 serial ports through 32-bit CardBus slot.
Compliance with PCI 33MHz Ver. 3.0/2.3/2.2 specification.
Each RS-232 ports communication speeds up to 230.4Kbps.
Built-in ±15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
Hot-swapping feature allows you to attach/detach RS-232 devices without first powering your
computer off.
Plug-n-Play, I/O address and IRQ assigned by BIOS.
Certified by CE, FCC, RoHS, and Microsoft WQHL approval.
Support Microsoft Windows, Linux.
CBP0020 CARDBUS 2PORT PARALLEL DB25 € 51.30 +VATSunix's CBP0020 parallel cardbus offers you two ports of
Parallel port for all your connection needs. The ports have
a data transfer rate up to 2.7 MB/sec. The card is plug-n-play
and installation is a breeze with the included driver CD.
Compatible with 32 bit CardBus slot
Easy to Plug-n-Play installation
Simple and easy way to connect devices to your notebooks
Speed up to 2.7 MB/sec / Friendly Graphic User Interface
ECP(Enhance Capacity Port, EPP(Enhance Parallel Port), BPP(Standard Parallel Port)
SPP mode(Bi-direction Parallel Port)
Chipset: SUNIX1888, IRQ & I/O address: Assigned by BIOS
Connector: DB44Pin to DB9/25Pin, FIFO: 32byte hardware FIFO, Baud Rate: 2.7 MB/sec
OS Support: Windows 2000/ XP/ 2003 / Vista
ECS1400 RS-232 SINGLE PORT EXPRESSCARD € 83.70 +VATSUNIX ECS1400 was created to meet the need of
the ExpressCard market where notebooks, desktops,
and docking stations could add one additional RS-232
serial port via a single slim-type 34/54mm ExpressCard
slot. ECS1400 equips SUNIX high performance Phones and fax/modems.
and realizable chipset quad UARTs, UL7512EQ and as
well built with many of SUNIX advanced features
and technologies, making it the best solution for commercial and industrial automation applications.
Users will benefit from ExpressCard plug-n-play ease of use, which eliminates the need to open
the chassis to add new features. With SUNIX ECS1400 RS-232 ExpressCard, you can connect
serial peripherals such as GPS receivers, serial printers/plotters,
barcode scanners, digital cameras, PDAs, Cell
Designed to meet PCI Express Base Specification Revision 1.1.
Full single-lane (or x1) PCI Express throughput.
Expands one RS-232 serial ports with communication speeds up to 230.4Kbps.
High reliability SUNIX UL7512EQ 16C750 compatible UART controller on-board.
Built-in ±15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
Plug-n-Play, I/O address and IRQ assigned by BIOS.
Hot-swapping feature allows you to connect/disconnect devices without powering down the system.
Certified by CE, FCC, RoHS, and Microsoft WQHL approval.
Support Microsoft Windows, Linux, and DOS.
PC0047 EXPRESS CARD 1X SERIAL INTERFACE CARD € 20.25 +VATEnlargement to 1x serial port
Upgrade kit for ExpressCard slot
Ideal for installation in notebook
Connection: ExpressCard
Compatible with 34mm and 54mm Slot
External Connectors: 1x 1x RS232 male
Specification referred 16C550 UART
Automatic IRQ address
Plug and Play
No driver installation required
PC0048 EXPRESS CARD PARALLEL INTERFACE CARD 1X € 24.30 +VATEnlargement to 1x parallel Anschlss
Upgrade kit for ExpressCard slot
Ideal for installation in notebook
Connection: ExpressCard
Compatible with 34mm and 54mm Slot
External Connectors: 1x DSUB25 female
Printer modes: SPP, EPP, ECP
Automatic IRQ address
Plug and Play
Cable included
PC0055 EXPRESS CARD 2x USB3.0 € 22.95 +VATUse the fast 3.0 USB devices now for your notebook.
The LogiLink Express Card offers two of these USB ports.
Just plug the controller into the Express Card Slot.
Supported are data transfer rates up to 5 Gbit/s.
Hot Plug and Play indicates the advantage to be used
without needing a specific driver when
used on modern operating systems
Express Card, USB 3.0
Chipset: NEC
2x USB 3.0 (Type A) female
Ideal for installation in notebook computers
Compatible with 34 mm and 54 mm
Max. Transfer rate: 5 Gbit/s
IB-AC605 USB 3.0 EXPRESS CARD FOR NOTEBOOK € 33.75 +VAT• PCI Express Single-lane (x1) revision 2.0 (5 Gbit/s)
• USB 3.0 Revision 1.0, transfer rate up to 5 Gbit/s
• Supports simultaneous operation of multiple USB 3.0,
USB 2.0 and USB 1.1 devices.
• With 2 external USB 3.0 ports
• Each USB 3.0 port supplies +5 V / 900 mA power output
• 4pin power connector for receiving extra power from system
• Hot-swap: connect/disconnect devices
without powering down the system
• Supports USB data transfer rate of 1.5/12/480/5000 Mbit/s
• Compliant with xHCI (eXtensible Host Controller Interface) Revision 0.95
• Support External USB HDD, USB Pen-drives, CD-R, Printer, digital camera
and video camcorders
• Supporting System Windows XP/Vista/7 (32/64-bit)
ECC1424 IEEE1394 FIREWIRE + USB2.0 EXPRESSCARD € 58.05 +VATFull single-lane (or x1) PCI Express throughput
Supports PCI Express Base Specification Revision
1.1.HARDWARE
ExpressCard hot plugging and hot swapping features.
Supports Windows2000/XP/2003, and Linux 2.4x,
2.6x operation system.
Fully supports EHCI and OHCI Compliant standards.
Compliant with Universal Serial Bus specification revision 2.0.
Provides one external USB2.0 high speed ports.
Supports simultaneous operation of multiple USB 2.0 and USB 1.1 devices.
Supports data transfer rates of high-speed (480Mbps),
full-speed (12 Mbps) and low-speed (1.5 Mbps).
Compliant with IEEE 1394 Open Host Controller Interface Specification 1.1.
Provides IEEE 1394a software enable better performance of the hardware and data transfer.
Provides two external independent FireWire ports.
Data transfer speeds of 100, and 400 Mbps are supported.
Cable power presence monitoring (power adapter using)for peripherals via 1394 cable.
Devices can be daisy-chained and no central bus supervision is required.
Supports peer to peer function and allows up to 63 devices to be connected in
a chain through its standard6-pin or 4-pin FireWire ports.
ECSA24 SATA II 2 CHANNELS EXPRESSCARD € 70.20 +VATFully compliant with ExpressCard 54mm wide module
Support one-lane 2.5Gbps PCI Express specification
Serial ATA generation 2 transfer rate of 3.0Gbps
Suitable for mobile and Notebooks
Supports hot plug for extend Serial ATA port
Supports Windows and Linux system
Mode:One-lane 2.5 Gbps PCI Express
OS Support: Windows 2000/XP/2003/Vista, Linux 2.4.x/2.6.x
PC0043 PCI SOUND CARD 7.1 CHANNEL € 12.15 +VATThe LogiLink PCI sound card installed in PCI slot
of your PC to the speakers, headset or headphones
connected. Using integrated 7.1 decoder makes
the sound experience a pleasure. The sound card
supports Direct Sound 3D, A3D, 64-bit sound effects,
and is backward compatible with 2.0, 2.1, 4.0, 4.1, 5.1.
7.1 Channel PCI Sound Card
PCI Rev. 2.2 32-bit slot
Chipset: VT1723
Built-7.1 decoder, S/PDIF input/output
Connections: Line-In, Mic In, Front-Out, Surround-Out
Rear Out & Center / Left-Out, S / PDIF port
Full-duplex playback and recording, 44.1KHz/48KHz/96KHz sampling. Direct Sound 3D &
DirectMusic compatible
PQ-438 CARD READER FOR PCMCIA / CARDBUS ADAPTOR € 32.40 +VATType I, II and III. Compliant with PC Card Rel. 8.0 and PCI 2.2 Specification
Support PCMCIA 2.1 and Cardbus PC card, with 3,3V / 5V operation
One PC card slot for (Type I/II/III PCMCIA card)
PC0005A PCI INTERFACE CARD e-SATA/S-ATA + IDE 1x € 12.15 +VATPCI card e-SATA / SATA & IDE
1x e-SATA external
2x SATA and 1x IDE 40-pin internal
Automatic IRQ address
Max Speed: 150 Mbit/s
Internal overvoltage protection
PC0003A PCI EXPRESS INTERFACE CARD 2X SATA + 1X IDE € 16.20 +VATExpansion 2x S-ATA + 1x ATA
Installation: PCI Express
Int 1: 2x serial ATA female SATA
Int 2: 1x ATA IDE 40-pin male
Serial ATA 1.0 standard, see
Max Speed: 2.5GB / s
2 independent SATA channels
RAID 0 (striping) and RAID 1 (Mirroring)
Output swing conrol, ROHS Compliant, FCC, CE
20112 eSATA PCI-E PORTMULTIPLIER CONTROLLER CARD € 56.70 +VATSilicon Image Sil3132 Chipset
PCI Express Base Specification Revision 1.0a
Full-chip command completion status accessible with single PCI Express access
Compliant with Serial ATA 1.0 specifications
Supports Serial ATA Generation 2 transfer rate of 3.0 Gb/s
Output Swing Control
Supports two independent Serial ATA channels
Independent Link,Transport,and data FIFO
Independent command fetch,scatter/gather,and command execution Hard coded state machines
no code space or download
Supports Native Queuing
Supports First Party DMA
Supports FIS-based switching with Port Multipliers
Supports Asynchronous Notification
Easy plug and play installation
Supports Windows 2000 / XP & Linux system
PC0028 USB 2.0 PCI INTERFACE CARD - 4-FOLD € 11.48 +VATUSB 2.0 EHCI downward compatible Win 98/SE/ME/2000/XP
For supplementary extension of a PC with 4 USB 2.0 interfaces.
Each port up to 500 mA overcurrent protected.
USB2300D PCI EXPRESS USB3.0 2 PORTS CARD € 35.10 +VATSupports PCI Express Base Specification Revision 2.0.
Single-lane ( x1) PCI Express throughput rates up to 5 Gbps.
Compliant with Universal Serial Bus 3.0 specification Revision 1.0.
Compliant with xHCI (eXtensible Host Controller Interface)
specifications Revision 0.96.
Supports simultaneous operation of multiple USB 3.0,
USB 2.0 and USB 1.1 devices.
Supports USB data transfer rate of 1.5/12/480/5000 Mbps.
Expands two external USB3.0 Super-Speed ports on the system.
Each USB port supplies maximum +5V
900mA power output to USB device.
Built-in 4-pin power connector for receiving extra power supply from system.
Hot-swapping feature allows you to connect/disconnect devices without powering down the system.
PC0054 PCI EXPRESS INTERFACE CARD USB 3.0 2X € 25.65 +VATExtension for 2 USB 3.0 ports
Installation: PCI Express 2.0 slot
Connections: 2x USB 3.0 A Female
USB 3.0 specification referred
Maximum Transmission: 5 Gbps
USB Legacy function
Power supply internally via 5.25 "
A maximum of 900 mA per USB 3.0 port
LED for operation and data flow
Plug and Play. Hot Swap
PC0069 PCI EXPRESS CARD, 3x USB 3.0 + 1x SATA II + 1x IDE LOGILINK € 36.45 +VATExternal Connectors: 3x USB 3.0 (Type A) female
Internal Connectors: 1x SATA II (3 GBit/s) & 1x IDE
Specification according to USB 3.0, SATA II, Ultra-DMA 6
Max. Transfer rate: 5 GBit/s (USB 3.0), 3 GBit/s (SATA II)
Supports xHCI Rev. 1.0
SATA II backward compatible to SATA I (1,5 GBit/s)
USB 3.0 backward compatible to USB 2.0 & USB 1.1
Incl. 1x Low Profile bracket
PC0006A PCI INTERFACE 3+1 x IEEE1394 € 14.18 +VATIEEE1394a PCI Card
3x IEEE1394 6-pin external
1x IEEE1394 6-pin internal
Automatic IRQ address
Max. transfer rate: 400 Mbit/s
Internal overvoltage protection
Incl. IEEE1394a 6-pin to 4 pin cable
Plug & Play. Chipset: VIA
PC0030A LOGILINK PCI INTERFACE CARD IEEE1394A 3+1 € 16.20 +VATIEEE1394a PCI Express card
3x IEEE1394 6-pin external
1x IEEE1394 6-pin internal
Max speed: 400 Mbit/s
Internal overvoltage protection
PC0016 LOGILINK PCI INTERFACE SERIAL 2X CARD € 16.20 +VATPCI card 2x Serial
2x RS232 9-pin external
16C550 UART specification referred
Automatic IRQ address
Maximum Speed: 1 MB/sec
Supports 16 byte transmit receive
4036A3V 2 PORTS RS-232 UNIVERSAL VOLTAGE PCI BOARD € 49.95 +VATLow RMA rate and high reliability with
Sunix's single chipset designed ASIC
Compliance with PCI ver. 2.2 spec. standard
Supports both 64-bit & 32-bit PCI bus slot and 3.3V & 5V power
Compatible with PCI-X and 64-bit system
Universal voltage fits all range of PCI slot
Industrial grade design for stability and reliability
Plug-n-Play, I/O address and IRQ assigned by BIOS
Parallel industrial host controller series are certified by WHQL, CE, FCC approval
Support Microsoft Windows, Linux, and DOS
5056A 4-PORT RS-232 UNIVERSAL PCI SERIAL BOARD € 58.05 +VATUniversal PCI serial communication board, allows users to add
or expand four RS-232 ports on PC-based system.
The card is compatible with both 64 / 32-bit PCI architecture
supporting 3.3 and 5V Bus, allowing it to be installed
in virtually any PC-based systems. SUNIX 5056A card has 128-bytes
onboard FIFO buffer and compatible with 16C950 UART specification.
It is designed with SUNIX UART controller, SUN1999 and as well built
with many of SUNIX advanced features and technologies,
making it the best solution for commercial and industrial automation applications.
Expands 4 independent RS-232 serial port with communication speeds up to 115.2Kbps.
High reliability SUN1999 16C950 compatible UART controller on-board.
Compliance with PCI 33MHz Ver. 3.0/2.3/2.2./2.1 specification.
Supports both 64-bit & 32-bit PCI bus slot and 3.3V & 5V power.
On-chip hardware auto flow control to guarantee no data loss.
Built-in ± 2KV ESD protection for all serial signals.
Plug-n-Play, I/O address and IRQ assigned by BIOS.
Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
Support Microsoft Windows, Linux, and DOS.
PC0017 PCI INTERFACE CARD SERIAL 4X € 22.95 +VATPCI Card 4x Serial
4x RS232 9-pin external
Specification: 16C550 UART
Automatic IRQ addressing
Max. transfer rate: 1 Mbyte/s
Supports 16 Byte transmit receive
4479A 2/1 PORTS RS-232 / PARALLEL PCI EXPRESS BOARD € 108.00 +VATExpress 2 RS-232 and IEEE 1284 Parallel on system
Designed to meet PCI Express Bases Specification Revision 1.1
Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys
High speed SUN1889 UART and SUN 1688 Parallel controller on-board
Support IEEE 1284-1994 parallel port standard
ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port)
SPP(Standard Parallel Port) / BPP(Bi-direction Parallel Port)
Built-in 15 KV ESD protection for all serial signals
Certified by Microsoft WHQL, CE, FCC approval
Support Linux, Microsoft Windows 2000, XP ,2003 and Vista
Ready for the Intel and AMD 32 / 64-bit CPU system
PC0013 LOGILINK PCI INTERFACE PARALLEL 1X CARD € 13.50 +VATPCI 1x Parallel PCI card
1x D-SUB 25-pin external
Specification according to IEEE1248
Automatic IRQ address
Printer modes: SPP, EPP, ECP
Bidirectional support
PC0033 LOGILINK PCI EXPRESS CARD 1X PARALLEL PORT +2X SERIAL € 28.35 +VAT2 serial Ports & 1 parallel Port / Fully Plug & Play compatible
Single-Lane (x1) PCI-Express with transfer rate 2.5Gb/s Full Duplex channel
Compliant with PCI-Express Revision 1.0a
Parallel:
Compatible to IEEE 1284 Printer Port
SPP, PS2, EPP, ECP Compatible IEEE 1284 Printer Port
Fast Data Rates up to 1.5 MBytes/sec
Built-in 16 Byte FIFO
Serial: Support RS-232 Hardware Flow Control
Compatible with Standard 16C550 UART
with 16-Byte Transmit-Receive FIFO
Fast Data RateS up to 1-MBytes/sec
L8139D 10/100 Mbit/s FAST ETHERNET PCI CARD TENDA € 6.08 +VAT10/100 MBit/s Fast Ethernet PCI Card
LAN Ports: 1x 10/100 MBit/s
Protocols: IEEE802.3, IEEE802.3u
Supports clock frequency of up to 40MHz
ACPI Power Management
TEL9901G 10/100 Mbit/s GIGABIT PCI CARD TENDA € 11.48 +VAT10/100/1000 MBit/s Gigabit PCI Card
LAN Ports: 1x 10/100/1000 MBit/s
Protocols: IEEE802.3, IEEE802.3u, IEEE802.z, IEEE802.ab
VLAN support with IEEE 802.1q priority queuing
Supports: UPnP, QoS
ACPI Power Management
Boot ROM Socket
NMA Auto Negotiation
PC0029A LOGILINK GIGABIT PCI EXPRESS ETHERNET CARD € 14.18 +VATRTL8168B chip. Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab standards
Supports PCI-E 1.0 X1 serial PCI Express
10/100/1000Mbps Auto-Negotiation
RJ45 ports supporting Auto-MDI/MDIX
Supports IEEE 802.3x fl ow control for Full Duplex mode
and half-duplex mode
Supports IEEE 802.1 Q VLAN tagging
Supports IEEE 802.1P Layer 2 Priority Encoding
transfer rate up to 500MB/S, LED indicators state for link/activity
Wake-on-LAN and remote wake-up support. Transmit/Receive on-chip buffer (48KB) support, Supports PNP
51125K GIGABIT NETWORK CARD, INLINE®, PCI EXPRESS 1GBit/s, PCIe X1 € 14.85 +VATPCI Express cards provides an network connection with data transfer rate up to 1000MBit/s.
Gigabit Lan IEEE 802.3, IEEE 802.3u, IEEE 802.3ab specification
Data transfer rates are 10/100/1000 MBit/s
PCI Express x1 Standard
supports PCI Express 1.0 specification
supports Full Duplex IEEE802.3x
automatic Crossover detection
for Windows 2000/XP/2003/windows 7
System requirements: one free PCI Express Slot,
Windows 2000/XP/2003
Contents: PCIe card, drivers CD, instructions
PC0075 2-port GIGABIT LAN PCI-EXPRESS CARD € 28.35 +VATChipset: Realtek 8111F + Asmedia 1182E
Ports: 2x (RJ45) Gigabit Ethernet
Complies with PCI-Express Base Specification Revision 2.0
Fully compliant with IEEE 802.3, 802.3u and 802.3ab
Supports full duplex flow control (IEEE 802.3x)
Supports IEEE 802.1P layer 2 Priority Encoding
Supports IEEE 802.1Q VLAN tagging
Supports WOL (Wake-On-LAN) function
Size: 120.0 x 92.6 x 21.5 mm (LxWxT)
WL0088 WIRELESS LAN PCI CARD 150 Mbit PCI LOGILINK € 18.23 +VATWireless LAN 150 MBit PCI Card
IEEE 802.11n, 802.11g, 802.11b
Data rates up to 150 Mbit/s
WEP, WPA, WPA2
Detachable antenna
Frequency range: 2400 - 2483.5 MHz
LED for Link/Activity
Chipset: Realtek
Plug & Play
40054I IEEE 802.11g WIRELESS LAN PCI ADAPTER 54Mbps € 20.25 +VATRealtek Chip, RTL8185L.
Compatible with IEEE 802.11g standard and maximum data transfer rate up to 54Mbps.
Dynamic date rate scaling at 54, 48, 36, 24, 18, 12, 9 and 6Mbps for 802.11g
Dynamic date rate scaling at 11, 5.5, 2 and 1Mbps for 802.11b.
Maximum reliability, throughput and connectivity with automatic data rate switching.
Supports 64/128-bit WEP Data Encryption, WPA and WPA2 security.
Supports both Infrastructure and Ad-Hoc Networking Modes.
Simple user setup & diagnostics utilities.
Data Transfer Rates: 11Mbps (11b mode), 54Mbps (11g mode)
Standard: IEEE 802.11g, backward compatible with IEEE 802.11b
Operating Radius: Indoor: 100m (max.), Outdoor: 300m (max.)
Radio Technology: IEEE 802.11g Orthogonal Frequency Division Multiplexing (OFDM),
IEEE 802.11b Direct Sequence Spread Spectrum (DSSS). Interface: 32-bit PCI v2.2.
Operating Frequency / Channel: 2.412~2.462GHz (FCC, US/Canada) / 11 Channels,
2.412~2.472GHz (ETSI, Europe) / 13 Channels 2.412~2.484GHz (TELEC, Japan) / 14
Channels
Modulation Schemes: DBPSK/DQPSK/CCK/OFDM.
Roaming: Full mobility and seamless roaming from cell to cell.
Antenna: External Detachable Antenna
Media Access Protocol: CSMA/CA with ACK. LED Indicators: Link/ACT
Operating Frequency / Channel: 2.412~2.462GHz
(FCC, US/Canada) / 11 Channels 2.412~2.472GHz
(ETSI, Europe) / 13 Channels 2.412~2.484GHz (TELEC, Japan) / 14 Channels
AD0005B ADAPTER S-ATA TO IDE ATAPI (PATA) € 9.45 +VATRun IDE Devices on SATA Controller
Connector 1: S-ATA male
Source: Mainboard or Controller
Connector 2: IDE 40-pin female
Target: IDE harddisk, CD, DVD, etc.
No drivers needed
Included in delivery: Converter
+ S-ATA connection cable
+ internal power cable
AD0006A ADAPTER IDE ATAPI (PATA) TO S-ATA € 9.45 +VATRun SATA Devices on IDE Controller
Connector 1: IDE 40-pin female
Source: Mainboard or IDE Controller
Connector 2: S-ATA
Target: S-ATA HDD, DVD, etc.
No drivers needed
Included in delivery: Converter
+ S-ATA connection cable
+ internal power cable
AD0008 ADAPTER S-ATA TO IDE + IDE TO S-ATA € 10.80 +VATConverter S-ATA to IDE or backward (bi-directional)
Connector 1: S-ATA male
Connector 2: IDE 40-pin female (PATA)
For Mainboard, Controller, Harddisk, DVD
Conversion Type switch
Standardized connectors
No drivers needed
LED for operation and activity
Cable length: 0.35 m
Included: S-ATA connection cable