PCC Hose Spec - Pressure...

R16-2SCR16-2SC -04-04 5,8005,800 DIN EN 857 2SC /DIN EN 857 2SC / 2-Wire Braid2-Wire Braid 6-IN-1 Hose™6-IN-1 Hose™ 66

-06 4,780 SAE 100R16 Type S

-08 4,000

-12 3,110

-16 2,390

R12-XDR12-XD -06-06 4,0604,060 SAE 100R12-XDSAE 100R12-XD 4-Spiral Wire4-Spiral Wire XtremeDuty™XtremeDuty™ 55

-08 4,060

-12 4,060

-16 4,060

PLPL -04-04 300300 Push-Lock™ HosePush-Lock™ Hose 1-Yarn Braid1-Yarn Braid Insta-Grip 300™Insta-Grip 300™ 1111

-05 300

-06 300

-08 300

-10 300

-12 300

PJPJ -04-04 3,0003,000 Pressure Washer HosePressure Washer Hose 1-Wire Braid1-Wire Braid PressureJET™PressureJET™ 99

-06 3,000

-08 3,000

PJXDPJXD -04-04 5,0005,000 Pressure Washer HosePressure Washer Hose 2-Wire Braid2-Wire Braid PressureJET XtremeDuty™PressureJET XtremeDuty™ 1010

-06 5,000

-08 4,500

PJHPJH -04-04 10,00010,000 Hydraulic Jack HoseHydraulic Jack Hose 2-Wire Braid2-Wire Braid PressureJACK™PressureJACK™ 88

-06 10,000

R17-GR17-G -04-04 3,0453,045 SAE 100R17SAE 100R17 2-Wire Braid2-Wire Braid WorkHorse Hose™WorkHorse Hose™ 77

-06 3,045

-08 3,045

-12 3,110

-16 3,045

4SH4SH -12-12 6,0906,090 DIN EN 856 4SHDIN EN 856 4SH 4-Spiral Wire4-Spiral Wire 4SH4SH 44

-16 5,510

2SC-XD2SC-XD -04-04 6,5306,530 2SC-XD / 2 SNK2SC-XD / 2 SNK Braided 2-WireBraided 2-Wire XtremeDuty™XtremeDuty™ 33

-06 5,585

SeriesSeries SizeSize PressurePressure Hose TypeHose Type ReinforcementReinforcement SeriesSeries PagePage

1SN1SN -04-04 3,0453,045 DIN EN 853 1SNDIN EN 853 1SN Braided 1-WireBraided 1-Wire 1SN / R1T1SN / R1T 22

-06 2,610

-08 2,320

-12 1,525

-16 1,275

PCC Hose Index

Pressure Rating & Bend Radiuscharts are on page 12

Best Value for 3,000 PSI Applications

Extreme Flex - 1 Million Cycles

Extreme Flex - 1 Million Cycles

1SN is an Upgrade from SAE 100R1T

Can Replace 6 Hoses R16, R17, R19, 2SN, R2AT & 2SC

Very Flexible with Long Life

Great Value

DIN EN 853 1SN

1SNDIN EN 853 1SN / SAE 100R1 SNon-Skive • MSHA Flame Resistant

PCCHose

Size

Part Number Nominal I.D. O.D.WorkingPressure

BurstPressure

BendRadius

WeightBite-to-Wire

Fitting

dash size in mm in mm in bar psi bar psi mm in kg / m lbs / ft crimp

R17-04G* 1/4 6.4 0.25 12.5 0.50 210 3,045 840 12,183 50.0 2.0 0.19 0.13 H2 / OPB / P2

1SN-06 3/8 9.5 0.37 17.4 0.69 180 2,610 720 10,440 125.0 5.0 0.33 0.22 H2 / OPB / P2

1SN-08 1/2 12.7 0.50 20.6 0.81 160 2,320 640 9,280 180.0 7.0 0.41 0.27 H2 / OPB / P2

1SN-12 3/4 19.0 0.75 27.7 1.09 105 1,525 420 6,100 240.0 9.5 0.58 0.39 H2 / OPB / P2

1SN-16 1” 25.4 1.00 35.6 1.40 88 1,275 350 5,075 300.0 11.8 0.88 0.59 H2 / OPB / P2

Description1-Wire braid low-medium pressure hydraulic hose that exceeds SAE 100R1AT, with greater pressure (DIN EN 853 1SN) to meet the demands in today’s rugged environments.

TubeOil Resistant Synthetic Rubber

ReinforcementOne High Tensile Steel Wire Braid

CoverHigh Ozone ResistanceWeather Resistant Synthetic RubberHigh Abrasion Resistance, More Than 2x the SAE Abrasion Resistance StandardMSHA Flame Resistance Approval (Certifi cate # IC-8/13)Black on Black Molded-Embossed Layline

Temperature Range-40° to +212° F (-40° to +100° C)+248° F (+120° C) Maximum Intermittent

Features• Non-Skive, Hose Cover Does Not Need to be Removed• Abrasion Resistance Is More Than Double SAE • 4:1 Safety Factor

Not Made in China

* R17-04G replaces 1SN-04.

Reel Quantities Hose Size Reel Ft.

-04 500

-06 500

-08 350

-12 500

-16 280

Actual Layline is Black on Black Molded-Embossed

2SC-XD / 2 SNK

2SC-XD2SC XtremeDuty™ • Non-Skive

MSHA • Million Cycle Impulse Tested

PCCHose

Size

Part Number Nominal I.D. O.D.Working

Pressure*Burst

Pressure*Bend

Radius*Weight

Bite-to-Wire Fitting*


2SC-XD-04 1/4 6.4 0.25 13.4 0.53 450 6,530 1,800 26,120 45.0 1.8 0.29 0.20 H4 / OPNS / P4

2SC-XD-06 3/8 9.5 0.37 17.4 0.69 385 5,585 1,540 22,340 70.0 2.8 0.44 0.30 H4 / OPNS / P4

2SC XtremeDuty™ Hose2SC XtremeDuty™ high pressure 2-wire hydraulic hose with greater fl exibility (2 SNK) and1 million cycle impulse tested longevity. *


ReinforcementTwo High Tensile Steel Wire Braids


Temperature Range-40° to +212° F (-40° to +100° C)+248° F (+120° C) Maximum Intermittent

Features• 2SC XtremeDuty™ Tight Bend Radius with High Working and Burst Pressures• 1 Million Cycle Impulse Tested*• Non-Skive, Hose Cover Does Not Need to be Removed• Abrasion Resistance Is More Than Double SAE • 4:1 Safety Factor

Not Made in China

* Pressure rating, bend radius, and cycle life can be reduced 50% or more if Pressure Connections 4-wire hose fittings are not used, and /or the recommended crimp procedures, including crimp specifications, are not followed.

Under development, to be released 1st quarter 2011, samples can be provided.


-04 500

-06 450


DIN EN 856 4SH

4SHDIN EN 856 4SHMSHA Flame Resistant

PCCHose

Size


BurstPressure

BendRadius

WeightBite-to-Wire

Fitting


4SH-12 3/4 19.0 0.75 32.2 1.27 420 6,090 1,680 24,366 280.0 11.0 1.53 1.03 H6 / OPS / P6

4SH-16 1” 25.4 1.00 38.7 1.52 380 5,510 1,520 22,045 340.0 13.4 2.06 1.38 H6 / OPS / P6

Description4-Spiral-Wire hose has been impulse tested to 400,000 cycles to ensure durability.The -12 size compares to SAE 100R13 for its light weight and SAE 100R15 for its high pressure.The -16 size compares to SAE 100R15 for lighter weight.


ReinforcementFour High Tensile Steel Wire Spiral Layers


Temperature Range-40° to +212° F (-40° to +100° C)248° F (+120° C) Maximum Intermittent

Features• 400,000 Cycle Impulse Tested• Abrasion Resistance Is More Than Double SAE • 4:1 Safety Factor

Not Made in China


Coil Quantities Hose Size Coil Ft.

-12 100

-16 100


R12-XDSAE 100R12-XD XtremeDuty™

Million Cycle • MSHA • 4,060 PSI

PCCHose

Size


BurstPressure

Bend Radius*

WeightBite-to-Wire

Fitting


With Skive 6-Wire PCC Hose Fittings

R12-XD-06 3/8 9.5 0.38 20.3 0.80 280 4,060 560 1,120 65.0 2.6 0.70 0.47 H6 / OPS / P6

R12-XD-08 1/2 12.7 0.50 23.8 0.94 280 4,060 560 1,120 90.0 3.5 0.90 0.61 H6 / OPS / P6

R12-XD-12 3/4 19.0 0.75 30.7 1.21 280 4,060 1,120 16,320 120.0 4.7 1.33 0.89 H6 / OPS / P6

R12-XD-16 1” 25.4 1.00 38.0 1.50 280 4,060 1,120 16,320 155.0 6.1 1.85 1.24 H6 / OPS / P6

With Non-Skive 4-Wire PCC Hose Fittings

R12-XD-06 3/8 9.5 0.38 20.3 0.80 280 4,060 560 1,120 125.0* 4.9* 0.70 0.47 H4 / OPNS / P4*

R12-XD-08 1/2 12.7 0.50 23.8 0.94 280 4,060 560 1,120 180.0* 7.0* 0.90 0.61 H4 / OPNS / P4*

R12-XD-12 3/4 19.0 0.75 30.7 1.21 280 4,060 1,120 16,320 240.0* 9.5* 1.33 0.89 H4 / OPNS / P4*

R12-XD-16 1” 25.4 1.00 38.0 1.50 280 4,060 1,120 16,320 300.0* 12.0* 1.85 1.24 H4 / OPNS / P4*

SAE 100R12-XD

Actual Layline is Grey on Grey Molded-Embossed

R12-XD XtremeDuty™ Hose4-Spiral-Wire XtremeDuty™ hydraulic hose exceeds SAE 100R12 / DIN EN 856 R12 specifi cations,and is impulse tested at 1 million cycles off ering greater fl exibility and durability. *

CoverHigh Ozone and Weather Resistant Synthetic RubberHigh Abrasion Resistance, More Than the 2x SAE StandardMSHA Flame Resistance Approval (Certifi cate # IC-8/13)Grey on Grey Molded-Embossed Layline

Features• Extreme Flexibility and Durability,

Exceeds SAE 100R12 / DIN EN 856 R12 Requirements • Non-Skive, Hose Cover Does Not Need to be Removed*• 4-Spiral-Wire XtremeDuty™ 1 Million Cycle Impulse Tested*• 4,060 PSI Isobaric Rating, 4:1 Safety Factor

This is One of the Most Flexible Hydraulic Hoses on the Planet

Not Made in China

* The 1 million cycle testing was done with Skive Type H6 / OPS / P6 fi ttings crimped to Pressure Connections specifi cations. Bend radius and cycle life can be reduced 50% or more if Pressure Connections’ skive 6-wire hose fittings are not used, and /or the recommended crimp procedures, including crimp specifications, are not followed.



ReinforcementFour High Tensile Steel Wire Spiral Layers

Temperature Range-40° to +212° F (-40° to +100° C) +248° F (+120° C) Max. Intermittent

Hose Ref.Aeroquip FC659

Parker 721

Coil Quantities Hose Size Coil Ft.

-12 100

-16 100

DIN EN 857 2SC / SAE 100R16 Type S

R16-2SC6-in-1 Hose™ 100R16 Type S, DIN EN 857 2SCNon-Skive • MSHA Flame Resistant

PCCHose

Size


Pressure*Burst

Pressure*Bend

Radius*Weight



R16-2SC-04 1/4 6.4 0.25 14.4 0.57 400 5,800 1,600 23,200 50.0 2.0 0.26 0.18 H2 / OPB / P2

R16-2SC-06 3/8 9.5 0.37 18.8 0.74 330 4,780 1,320 19,120 65.0 2.6 0.40 0.27 H2 / OPB / P2

R16-2SC-08 1/2 12.7 0.50 21.9 0.86 276 4,000 1,104 16,000 90.0 3.5 0.48 0.33 H2 / OPB / P2

R16-2SC-12 † 3/4 19.0 0.75 28.9 1.14 215 3,110 860 12,440 120.0 4.7 0.71 0.48 H2 / OPB / P2

R16-2SC-16 † ‡ 1” 25.4 1.00 36.5 1.44 165 2,390 660 9,560 150.0 5.9 1.00 0.68 H2 / OPB / P2

6-in-1 Hose™ Reduces InventoryThe 6-in-1 Hose™ series meets or exceeds, and can replace: SAE 100R19‡, DIN EN 857 2SC,SAE 100R17†, SAE 100R16, SAE 100R2AT, and 2SN for most applications.


CoverHigh Ozone ResistanceWeather Resistant Synthetic RubberBlack on Black Molded-Embossed LaylineMSHA Flame Resistance Approval (Certifi cate # IC-8/13)High Abrasion Resistance, More Than 2x the SAE Abrasion Resistance Standard

Features• Increased Durability to Pressure Spikes Over SAE 100R2AT and SAE 100R16• Tight Bend Radii Increases Cycling Durability Over SAE 100R2AT and 2SN• Minimum Bend Radii meets SAE 100R16, SAE 100R19, SAE 100R17, and 2SC• Bend Radius and Working Pressure Exceeds SAE 100R2AT • 4:1 Safety Factor• Exceeds 100R17 Specifi cations -04 Through -12• Pressure Meets or Exceeds SAE 100R19‡, SAE 100R17†, SAE 100R16 , DIN EN 857 2SC, and 2SN• Non-Skive, Hose Cover Does Not Need to be Removed• Comparable to ISO 11237-1 Type 2SC

Not Made in China

* All specifi cations above are based on Pressure Connections Bite-to-Wire fi ttings. Tests on Eaton Weatherhead non bite-to-wire style fi ttings indicate a 16-39% reduction in pressure performance and a 40-50% reduction in bend radii. Therefore, no warranty is expressed or implied when used with other brand hose fi ttings on Pressure Connections hoses.† SAE 100R19 sizes -04, -06, and -08 only.‡ SAE 100R17 sizes -04, -06, -08, and -12 only.


-04 500

-06 450

-08 320

-12 400

-16 200


Temperature Range-40° to +212° F (-40° to +100° C)+248° F (+120° C) Max. Intermittent

Hose Ref.Aeroquip GH781

Parker 462-Elite


R17-GWorkHorse Hose™ • 3,045 PSI

Non-Skive • MSHA Flame Resistant

PCCHose

Size


BurstPressure

BendRadius

WeightBite-to-Wire

Fitting


R17-04G 1/4 6.4 0.25 12.5 0.50 210 3,045 840 12,183 50.0 2.0 0.19 0.13 H2 / OPB / P2

R17-06G 3/8 9.5 0.37 16.5 0.65 210 3,045 840 12,183 65.0 2.5 0.27 0.19 H2 / OPB / P2

R17-08G 1/2 12.7 0.50 19.7 0.78 210 3,045 840 12,183 90.0 3.5 0.46 0.31 H2 / OPB / P2

R16-2SC-12* 3/4 19.0 0.75 28.9 1.14 215 3,110 860 12,440 120.0 4.7 0.71 0.48 H2 / OPB / P2

R17-16G 1” 25.4 1.00 36.2 1.43 210 3,045 840 12,183 150.0 6.0 1.40 0.95 H2 / OPB / P2

WorkHorse Hose™Our R17-G WorkHorse Hose™ is a 1-wire or 2-wire braid depending on the size. It is one of our most popular hoses suitable for 3,045 PSI applications.


ReinforcementOne High Tensile Steel Wire Braid: -04G, -06G, -08GTwo High Tensile Steel Wire Braids: -12, -16G


Temperature Range-40° to +212° F (-40° to +100° C) +248° F (+120° C) Maximum Intermittent

Features• The –04 and –06 Sizes Can Replace SAE 100R16, SAE 100R2AT, and 1SN Hoses• The –08 Size Can Replace SAE 100R16 and SAE 100R2AT Hoses• The –12 Size Can Replace 2SC and 2SN Hoses• Non-Skive, Hose Cover Does Not Need to be Removed• Isobaric Hose at 3,045 PSI• 4:1 Safety Factor

Not Made in China * R16-2SC-12 replaces R17-12G.


-04 500

-06 500

-08 350

-12 500

-16 200

SAE 100R17

Hose Ref.Aeroquip FC639

Gates Mega3000 (M3K)

Parker 451

Weatherhead H145


Hydraulic Jack Hose

PJHPressureJACK™ Hose • 10,000 PSINon-Skive • MSHA Flame Resistant

PCCHose

Size


BurstPressure

BendRadius

WeightBite-to-Wire

Fitting


PJH-04 1/4 6.4 0.25 15.0 0.59 690 10,000 1,380 20,000 100.0 4.0 0.30 0.20 H2 / OPB / P2

PJH-06* 3/8 9.5 0.37 19.0 0.75 690 10,000 1,380 20,000 130.0 5.0 0.50 0.34 H2 / OPB / P2


-04 500

-06 450

PressureJACK™ HosePressureJACK™ hose is a 2-wire steel braided ultra-high pressure hydraulic jack hosespecifi cally designed for high pressures found in hydraulic jack applications.



CoverHigh Ozone ResistanceWeather Resistant Synthetic RubberBlack on Black Molded-Embossed LaylineMSHA Flame Resistance Approval (Certifi cate # IC-8/13)High Abrasion Resistance, More Than 2x the SAE Abrasion Resistance Standard

Temperature Range-40° to +212° F (-40° to +100° C) +248° F (+120° C) Maximum Intermittent

Features• PressureJACK™ Hose is Rated at 10,000 PSI to Withstand Pressure Spikes Found in Hydraulic Jack Applications• Non-Skive, Hose Cover Does Not Need to be Removed• 2:1 Safety Factor

Not Made in China

* -06 size to be released 1st quarter 2011, samples can be provided.


PJPressureJET™ • Non-Skive

Pressure Washer Hose • 3,000 PSI

PCCHose

Size


BurstPressure

BendRadius

WeightBite-to-Wire

Fitting


PJ-04 1/4 6.4 0.25 12.0 0.47 210 3,000 840 12,000 50.8 2.0 0.18 0.12 H2 / OPB / P2

PJ-06 3/8 9.5 0.37 16.5 0.65 210 3,000 840 12,000 76.2 3.0 0.28 0.19 H2 / OPB / P2

PJ-08* 1/2 12.7 0.50 20.0 0.79 210 3,000 840 12,000 101.2 4.0 0.37 0.25 H2 / OPB / P2

PressureJET™ HosePressureJET™ 1-wire Pressure Washer, Car Wash, and Carpet Cleaning Hose

TubeBlack Synthetic RubberResistant to All Commercial Detergents

ReinforcementOne High Tensile Steel Wire Braid

CoverStandard Black Synthetic Rubber with Fabric ImpressionBlack on Black Molded-Embossed Layline

Temperature RangeUp to +300° F (Up to +150° C) Intermitent Maximum Service

Features• PressureJET™ Pressure Washer Hose is a Crimp-Ready Hose Using Standard H2 / OPB / P2 Crimp Fittings• This Hose Does NOT Need to be Pin-Pricked for Most Applications• Non-Skive, Hose Cover Does Not Need to be Removed• Isobaric 3,000 PSI Hose• 4:1 Safety Factor

Not Made in China

* -08 size to be released 1st quarter 2011, samples can be provided.

Coil Quantities Hose Size Reel Ft.

-04 500

-06 500

-08 350

Pressure Washer Hose


PJXDPressureJET XtremeDuty™ • Long LifePressure Washer Hose • 5,000 PSI • Non-Skive

PCCHose

Size


Pressure*Burst

Pressure*Bend

Radius*Weight



PJXD-04 1/4 6.4 0.25 14.0 0.55 345 5,000 0.30 0.20 H2 / OPB / P2

PJXD-06 3/8 9.5 0.37 17.5 0.69 345 5,000 0.45 0.30 H2 / OPB / P2

PJXD-08 1/2 12.7 0.50 21.1 0.83 310 4,500 0.55 0.37 H2 / OPB / P2

PressureJET™ XtremeDuty™ Long Life HosePressureJET XtremeDuty™ Pressure Washer Hose is Engineered to Provide Long Life With High Pressure and Great Flexibility. This Hose Does NOT Need to be Pin-Pricked for Most Applications.

TubeBlack Synthetic Rubber

ReinforcementTwo High Tensile Steel Wire BraidsCompact Construction

CoverStandard Black Wrapped Synthetic RubberBlack on Black Molded-Embossed Layline

Temperature RangeUp to +300° F (Up to +150° C) Intermitent Maximum Service

Features• PressureJET XtremeDuty™ Pressure Washer Hose is Engineered for Long Life• This Hose Does NOT Need to be Pin-Pricked for Most Applications• Crimp-Ready Hose Using Standard H2 / OPB / P2 Crimp Fittings*• Non-Skive, Hose Cover Does Not Need to be Removed

* All specifi cations above are based on Pressure Connections Bite-to-Wire fi ttings. Tests on Eaton Weatherhead non bite-to-wire style fi ttings indicate a 16-39% reduction in pressure performance and a 40-50% reduction in bend radii. Therefore, no warranty is expressed or implied when used with other brand hose fi ttings on Pressure Connections hoses.

Not Made in China

To be released 1st quarter 2011, samples can be provided.

Coil Quantities Hose Size Reel Ft.

-04 500

-06 450

-08 320

Pressure Washer Hose


Push-Lock™ Hose

PL Insta-Grip 300™

Push-Lock™ Hose • 300 PSI

PCCHose

Size


BurstPressure

BendRadius

Weight Push-Lock

dash size in mm in mm in bar psi bar psi mm in kg / m lbs / ft Barb

PL-04 1/4 6.4 0.25 13.7 0.54 20 300 82 1,200 64.0 2.5 0.13 0.09 272 Series*

PL-05 5/16 7.9 0.31 15.7 0.62 20 300 82 1,200 76.0 3.0 0.18 0.12 272 Series*

PL-06 3/8 9.5 0.37 17.5 0.69 20 300 82 1,200 76.0 3.0 0.21 0.14 272 Series*

PL-08 1/2 12.7 0.50 20.6 0.81 20 300 82 1,200 127.0 5.0 0.25 0.17 272 Series*

PL-10 5/8 15.9 0.63 23.6 0.93 20 300 82 1,200 152.0 6.0 0.30 0.20 272 Series*

PL-12 3/4 19.0 0.75 27.2 1.07 20 300 82 1,200 178.0 7.0 0.39 0.26 272 Series*

Insta-Grip 300™ HoseFor use with Pressure Connections Push-Lock™ Hose Barbs in low pressure hydraulic and pneumatic systems such as shop air systems, general industrial, maintenance, and automotive assembly applications. Nonconductive, minimum electrical resistance, greater than one (1) megohm of hose length per inch of hose length at 1,000 volts DC.

TubeChemivic® Oil and Heat Resistant Synthetic Rubber, RMA Class A (High Oil Resistance)Silicone is NOT Used in the Manufacturing of This Hose

Reinforcement1-Braided High Strength Synthetic Yarn Laid at the Most Eff ective Angle for Maximum Strengthand Barb Holding Ability

CoverStandard Black, Optional: Blue, Green, Grey and RedWeather, Abrasion and Oil Resistant Synthetic Rubber, RMA Class B (Medium Oil-Resistance)

Temperature Range-40° to +190° F (-40° to +88° C)

Features• Non-conductive• Non-silicone Manufacturing Process• Air and Oil Compatability• Push-Lock™ Hose Barbs Do NOT Require a Clamp*

* See Our Brass Hose Barb and Fitting Catalog for all of the diff erent styles of Push-Lock™ series hose barbs.®Chemivic is a registered trademark of Goodyear


-04 500

-06 500

-08 500

-12 500

Made in the U.S.A.

Bend Radius ChartBend Radius Chart

SeriesSeries SizeSize Bend RadiusBend Radius Hose TypeHose Type PagePage

R17-G -06 2.5 SAE 100R17 7

2SC-XD -06 2.8 2SC-XD / 2 SNK 3

R16-2SC -06 2.6 DIN EN 857 2SC 6

R16-2SC -08 3.5 DIN EN 857 2SC 6

R17-G -08 3.5 SAE 100R17 7

R12-XD -06 4.7 SAE 100R12-XD 5

R16-2SC -12 4.7 DIN EN 857 2SC 6

R17-G -12 4.7 SAE 100R17 7

1SN -06 5.0 DIN EN 853 1SN 2

R17-G -16 6.0 SAE 100R17 7

R16-2SC -16 5.9 DIN EN 857 2SC 6

R12-XD -12 6.1 SAE 100R12-XD 5

1SN -08 7.0 DIN EN 853 1SN 2

R12-XD -08 9.5 SAE 100R12-XD 5

4SH -12 11.0 DIN EN 856 4SH 4

1SN -16 11.8 DIN EN 853 1SN 2

R12-XD -16 12.0 SAE 100R12-XD 5

4SH -16 13.4 DIN EN 856 4SH 4

Pressure Rating ChartPressure Rating Chart

SeriesSeries SizeSize P S IP S I Hose TypeHose Type PagePage

PJH All 10,000 Hydraulic Jack Hose 8

2SC-XD -04 6,530 2SC-XD / 2 SNK 3

4SH -12 6,090 DIN EN 856 4SH 4

R16-2SC -04 5,800 DIN EN 857 2SC 6

2SC-XD -06 5,585 2SC-XD / 2 SNK 3

4SH -16 5,510 DIN EN 856 4SH 4

PJXD All 5,000 Pressure Washer Hose XD 10

R16-2SC -06 4,780 DIN EN 857 2SC 6

R12-XD All 4,060 SAE 100R12-XD 5

R16-2SC -08 4,000 DIN EN 857 2SC 6

1SN -04 3,265 DIN EN 853 1SN 2

R16-2SC -12 3,110 DIN EN 857 2SC 6

R17-G All 3,045 SAE 100R17 7

PJ All 3,000 Pressure Washer Hose 9

1SN -06 2,610 DIN EN 853 1SN 2

R16-2SC -16 2,390 DIN EN 857 2SC 6

1SN -08 2,320 DIN EN 853 1SN 2

1SN -16 1,275 DIN EN 853 1SN 2

PL All 300 Push-Lock™ Hose 11

Pressure Rating & Bend Radius Charts

PCC Hose Spec - Pressure...

Documents

Transcript of PCC Hose Spec - Pressure...