Innovator Case Studies: Innovator Case Studies: Physician ...
PATRIOT™ INNOVATOR INJECTION SYSTEMS€¦ · PatriotTM Innovator Plus PLC System Patriot...
1
PATRIOT™ INNOVATOR INJECTION SYSTEMS For more information about adding the Patriot™ Innovator Injection Systems to your operation, or any of your adhesive dispensing needs, visit Magnum Venus Products at www.mvpind.com. Power, versatility, automation and unprecedented precision in two compact systems. SYSTEM FEATURES SPECIFICATIONS The Patriot™ Innovator Injection Systems were designed for injecting polyester, vinylester and methacrylate resins and catalyst at controlled pressures. The material mixing is done on demand at the injection head, and the catalyst ratio can be adjusted from 0.75% to 2.5%. The fully pneumatic automated controls, controlling the number of strokes during injections, recirculation, and more makes the process easier and more efficient. • Highly accurate Patriot™ mix/meter technology • Powered and operated solely through pneumatics • Resin Gel Alarm (RGA) • Mold Pressure Guard (MPG) • Increased efficiency • Unique control panel • Easy to operate PATRIOT™ INNOVATOR II PRO SYSTEM Output Capabilities: Up to 7.5 lbs./min. (3.4 kg/min.) depending on materials & application Catalyst % Range: 0.75% to 2.5% by volume Avg. Air Consumption: 10 CFM Available Pump Ratio: 7:1 Max Air Input Pressure: 100PSI (7 BAR) PATRIOT™ INNOVATOR II MEGAJECT INNOVATOR SYSTEM Output Capabilities: Up to 7.5 lbs./min. (3.4 kg/min.) depending on materials & application Catalyst % Range: 0.75% to 2.5% by volume Avg. Air Consumption: 10 CFM/150 ltrs Available Pump Ratio: 7:1 Max Air Input Pressure: 100PSI (7 BAR) PATRIOT™ INNOVATOR HIGH VOLUME SYSTEM Output Capabilities: 7lb-30lbs/min (1.5kg-6.7kg/min) Catalyst % Range: .75 to 2.25% Avg. Air Consumption: 15 CFM Available Pump Ratio: 7:1 Max Air Input Pressure: 100PSI (7 BAR) PATRIOT™ INNOVATOR PLUS PLC SYSTEM Output Capabilities: Up to 7.5 lbs./min. (3.4 kg/min.) depending on materials & application Catalyst % Range: 0.75% to 2.5% by volume Avg. Air Consumption: 10 CFM/150 ltrs Available Pump Ratio: 7:1 Max Air Input Pressure: 100PSI (7 BAR) OPTIONS Heaters • CFH Series • Heater Control Patriot TM Innovator Plus PLC System Patriot TM Innovator Injection System Other Options • Pneumatic PV Sensor • CE Guard • Turbo Auto Sprue • Patriot™ Innovator Plus PLC Option Kent Manufacturing Center 1862 Ives Ave. Kent, WA 98032 253-854-2660 Knoxville Corporate Headquarters 2030 Falling Waters Rd., Suite 350 Knoxville, TN 37932 865-686-5670 Oldsmar Service Center 146 Dunbar Avenue, Unit A Oldsmar, FL 34677 727-573-2955 Canada 72 Beauvais Delson, Qc J5B 1W8 888.538.4330 Goshen Service Center 320 North Main St. Goshen, IN 46528 574-534-1434 Knoxville Service Center 642 Barbrow Lane Knoxville, TN 37932 865-321-8809 DESCRIPTION:
Transcript of PATRIOT™ INNOVATOR INJECTION SYSTEMS€¦ · PatriotTM Innovator Plus PLC System Patriot...
PATRIOT™ INNOVATOR INJECTION SYSTEMS
For more information about adding the Patriot™ Innovator Injection Systems to your operation,or any of your adhesive dispensing needs, visit Magnum Venus Products at www.mvpind.com.
Power, versatility, automation and unprecedented precision in two compact systems.
SYSTEM FEATURES
SPECIFICATIONS
The Patriot™ Innovator Injection Systems were designed for injecting polyester, vinylester and methacrylate resins and catalyst at controlled pressures. The material mixing is done on demand at the injection head, and the catalyst ratio can be adjusted from 0.75% to 2.5%. The fully pneumatic automated controls, controlling the number of strokes during injections, recirculation, and more makes the process easier and more efficient.
• Highly accurate Patriot™ mix/meter technology• Powered and operated solely through pneumatics• Resin Gel Alarm (RGA)• Mold Pressure Guard (MPG)• Increased efficiency• Unique control panel• Easy to operate
PATRIOT™ INNOVATOR II PRO SYSTEMOutput Capabilities: Up to 7.5 lbs./min. (3.4 kg/min.) depending on materials & applicationCatalyst % Range: 0.75% to 2.5% by volumeAvg. Air Consumption: 10 CFMAvailable Pump Ratio: 7:1Max Air Input Pressure: 100PSI (7 BAR)
PATRIOT™ INNOVATOR IIMEGAJECT INNOVATOR SYSTEMOutput Capabilities: Up to 7.5 lbs./min. (3.4 kg/min.) depending on materials & applicationCatalyst % Range: 0.75% to 2.5% by volumeAvg. Air Consumption: 10 CFM/150 ltrsAvailable Pump Ratio: 7:1Max Air Input Pressure: 100PSI (7 BAR)
PATRIOT™ INNOVATOR HIGH VOLUME SYSTEMOutput Capabilities: 7lb-30lbs/min (1.5kg-6.7kg/min)Catalyst % Range: .75 to 2.25%Avg. Air Consumption: 15 CFMAvailable Pump Ratio: 7:1Max Air Input Pressure: 100PSI (7 BAR)
PATRIOT™ INNOVATOR PLUS PLC SYSTEMOutput Capabilities: Up to 7.5 lbs./min. (3.4 kg/min.) depending on materials & applicationCatalyst % Range: 0.75% to 2.5% by volumeAvg. Air Consumption: 10 CFM/150 ltrsAvailable Pump Ratio: 7:1Max Air Input Pressure: 100PSI (7 BAR)
OPTIONSHeaters
• CFH Series• Heater Control
PatriotTM Innovator Plus PLC System
PatriotTM Innovator Injection System
Other Options• Pneumatic PV Sensor• CE Guard• Turbo Auto Sprue• Patriot™ Innovator
Plus PLC Option
KentManufacturing Center
1862 Ives Ave.Kent, WA 98032
253-854-2660
KnoxvilleCorporate Headquarters
2030 Falling Waters Rd., Suite 350 Knoxville, TN 37932
865-686-5670
OldsmarService Center
146 Dunbar Avenue, Unit AOldsmar, FL 34677
727-573-2955
Canada72 Beauvais
Delson, Qc J5B 1W8
888.538.4330
GoshenService Center320 North Main St.Goshen, IN 46528
574-534-1434
KnoxvilleService Center642 Barbrow LaneKnoxville, TN 37932
865-321-8809
DESCRIPTION:
