Past and Present Facilities I have Managed 20160205
16
By: Alexander Mieszkowski, P.Eng. 5 th February, 2016
-
Upload
alexander-mieszkowski -
Category
Documents
-
view
216 -
download
0
Transcript of Past and Present Facilities I have Managed 20160205
By: Alexander Mieszkowski, P.Eng. 5th February, 2016
Current employer
THE ANDRITZ GROUP:
Is a leading global supplier (and service company) of OEM equipment for the Hydro
Electric Power, Pulp and Paper, Metalworking, Steel, Solid/Liquid Industrial Sectors.
ATC LOCATION: 190 Different Products
38,000 m² Land Area
5,000 m² Office Area
20,000 m² Mfg. Area
370,000 DLH/Yr.
DEPARTMENTS:
Fabrication
Machining
Surface Treatment
Assembly
Quality Control
Shipping Receiving
THE ANDRITZ LTD.:
Is the largest capitol manufacturing location in the Andritz Group providing OEM equipment for domestic
and international markets.
Vice General Manager of Operations (China) & ATC Location Manager
Vice General Manager of Operations (China) & ATC Location Manager
Vice General Manager of Operations & ATC Location Manager
Vice General Manager of Operations & ATC Location Manager
Vice General Manager of Operations & ATC Location Manager
Vice General Manager Pulp & Paper Service Division
SANSHUI (PPS)
LOCATION: 190 Different Products
6,000 m² Land Area
1,000 m² Office Area
4,000 m² Mfg. Area
40,000 DLH/Yr.
DEPARTMENTS:
Fabrication
Machining
Assembly
THE ANDRITZ PPS/PPK DIVISION:
Is the Chinese Service Center that supports the Repairs & Rebuilds of its OEM machinery such as LC
Refiners, Low Pressure Rotary Valves, Plug Screw, MSD’s & Feeders.
Vice General Manager Pulp & Paper Service Division
Operations Manager of North American Pulp & Paper Service Center
DRT LOCATION: 50 Different Products
7,000 m² Land Area
1,000 m² Office Area
5,000 m² Mfg. Area
45,000 DLH/Yr.
DEPARTMENTS:
Assembly
Surface Treatment
Quality Control
Shipping Receiving
*All Fabrication and
Machining is outsourced
to local suppliers and all
disassembly, assembly &
testing is done in-house.
ANDRITZ LTD:
Is the North American Service Center to support Repairs & Rebuilds of the OEM machinery produced
by their Pulp and Paper Division (such as TMP Refiners, Rotary Valves, Plug Screw Feeders, etc.).
Operations Manager of North American Pulp & Paper Service Center
Production Planning Manager
DRT LOCATION: 2 Different Products
12,000 m² Land Area
1,000 m² Office Area
10,000 m² Mfg. Area
100,000 DLH/Yr.
Departments:
Fabrication
Machining
Surface Treatment
Assembly
Quality Control
Shipping Receiving
AD DEMIREL:
Was a joint venture between Pragma Drilling Technologies Ltd. & AD Demirel for the manufacturing of
drilling platform equipment destined for the Middle East.
Production Planning Manager
Production Planning Manager
CANRIG/PRAGMA
LOCATION: 8 Different Products
6,000 m² Land Area
1,000 m² Office Area
4,000 m² Mfg. Area
45,000 DLH/Yr.
DEPARTMENTS:
Assembly
Quality Control
Shipping Receiving
*All Fabrication and
Machining is outsourced
to local suppliers and all
disassembly, assembly &
testing is done in-house.
CANRIG:
Is a subsidiary of Nabors Drilling Ltd. and is one of the largest manufacturers of and global leaders in
OEM drilling rig equipment (such as Automated Catwalks, Wrenches & Top Drives) for the drilling industry
Operations Manager of North American Pulp & Paper Service Center
16
