Parts washer
2
tight, spark-resistant construction op- tions; can be designed to meet special space and sound requirements and API specifications and applicable welding codes; and offer a performance range of up to 125in. WG pressure, up to 100,000 cfm air/gas flow, and over 75% peak efficiency. Circle 425 on reader service card Wastewater Recycling System Kinetic0 Inc. NewbuB Ohio Kinetic0 has introduced the CIX- Extreme, a high-purity deionization (DI) recycling system specially de- signed for semiconductor lead-frame plating, printed circuit board, and elec- trofinishing processes. Six standard re- cycling flow rates, 5 to 150 gpm, have been engineered to handle industrial water management applications. The system recycles more than 95% of wastewater as high purity DI over 5 meg-ohm quality; reduces water, sewer, and waste treatment costs; elim- inates purchase of other water process- ing equipment; improves rinse effi- DECEMBER 2 1997 Upgrade your DEGREASING SYSTEM to meet NESHAP and EPA regulatory standards. Or replace with a new approved system or go with the alternative Aqueous Cleaning Equipment. WEST- ERN SONICS can upgrade or supply you with your cleaning needs. Before its too late!!! 20468 Carrey Rd., Walnut, CA 91799 909.468.0600 Fax: 909.468.0606 Circle 119 on reaaer mrormauon cam ciency by providing high-purity DI for all process steps; makes zero discharge to a sewer technically feasible and cost-effective; and uses 50% less floor space than other equipment. The CIX line is compatible with metal recovery systems that reduce sludge volumes or copper, nickel, and tin/lead, thus elim- inating the need for additional conven- tional wastewater equipment. Circle 426 on reader servlce card Parts Washer Kleer-f/oCo. EdenPrairie, Minn. Kleer-Flo’s water-based Parts washer, Model A35, is designed to use biodegradable aqueous solution, elim- inating the need for expensive rental charges and the environmental, safety, and potential fire hazards associated with solvent cleaning. Features include a double-wall sink sloped for arm com- fort when washing parts, GFI protec- tion, and a large on/off switch that can Circle 133 on reader information card 98 METAL FINISHING . SEPTEMBER 1997
Transcript of Parts washer
tight, spark-resistant construction op- tions; can be designed to meet special space and sound requirements and API specifications and applicable welding codes; and offer a performance range of up to 125in. WG pressure, up to 100,000 cfm air/gas flow, and over 75% peak efficiency.
Circle 425 on reader service card
Wastewater Recycling System Kinetic0 Inc. NewbuB Ohio
Kinetic0 has introduced the CIX- Extreme, a high-purity deionization (DI) recycling system specially de- signed for semiconductor lead-frame plating, printed circuit board, and elec- trofinishing processes. Six standard re- cycling flow rates, 5 to 150 gpm, have been engineered to handle industrial water management applications. The system recycles more than 95% of wastewater as high purity DI over 5 meg-ohm quality; reduces water,
sewer, and waste treatment costs; elim- inates purchase of other water process- ing equipment; improves rinse effi-
DECEMBER 2 1997 Upgrade your DEGREASING SYSTEM to meet NESHAP and EPA regulatory standards. Or replace with a new approved system or go with the alternative Aqueous Cleaning Equipment. WEST- ERN SONICS can upgrade or supply you with your cleaning needs.
Before its too late!!!
20468 Carrey Rd., Walnut, CA 91799 909.468.0600 Fax: 909.468.0606
Circle 119 on reaaer mrormauon cam
ciency by providing high-purity DI for all process steps; makes zero discharge to a sewer technically feasible and cost-effective; and uses 50% less floor space than other equipment. The CIX line is compatible with metal recovery systems that reduce sludge volumes or copper, nickel, and tin/lead, thus elim- inating the need for additional conven- tional wastewater equipment.
Circle 426 on reader servlce card
Parts Washer Kleer-f/o Co. Eden Prairie, Minn.
Kleer-Flo’s water-based Parts washer, Model A35, is designed to use biodegradable aqueous solution, elim- inating the need for expensive rental charges and the environmental, safety, and potential fire hazards associated with solvent cleaning. Features include a double-wall sink sloped for arm com- fort when washing parts, GFI protec- tion, and a large on/off switch that can
Circle 133 on reader information card
98 METAL FINISHING . SEPTEMBER 1997
be operated by hand or knee. The low liquid level indicator light appears when additional solution should be added to the machine.
Circle 427 on reader service card
Alloy Identification Kit Kos/ow Scientific CO. Edge water, N. J.
Koslow’s new improved General Al- loy ID Lab 1599 for the identification of stainless steels, nickel alloys, and tool steels contains all materials and instruction needed and is completely portable for on-site testing. It includes the ElectroSpot II with an auto-timer. Any size or shape metal piece can be successfully identified.
Circle 428 on reader service card
Parts Washers Landa Inc. Portland, Ore.
Landa’s SJ- 15 larger model auto- matic parts washer features a parts bas- ket up to 32 in. long and 21 in. wide, large enough for cleaning most truck and automobile transmissions. The washer features a water-propelled spray bar that spins around a stationary parts basket blasting parts at a rate of
Chile 130 on reader information ‘card
up to 200 times per min. and uses hot water and biodegradable soaps.2
Circle 429 on reeder service card
If you we: ?? Switching away from CFC’s. ?? Using detergent based
cleani, zg agents. ?? Conce vzed about improper/
insufji :ient rinsing of parts. ?? Using “Water Break Test”.
You cian s;jve money and improvj3 que.lity by using our systems to optimize & verify cleaning process.
There s oniy one practical, accurate, fast and easy way to QUANl’iTATIVELY MEASIJRE CLEANLINESS. Patented Surface Chemistry Detection System: from Photo Emission.
Visit our home page at http://axs-group.com/pet
E-mail: pet@ix.?etcom.com
PHOTO EMISSION TECH., INC.
Synthetic Drawing Compound McGean-lbhco Inc. C/eve/am
Super Draw Syn 37 Lite, a high- technology drawing compound with synergistic synthetic additives delivers optimum drawing performance and ef- ficiency ‘,vithout using chlorine or sul- fur. Designed for the most severe drawing requirements, it provides a more uniform consistency over a wide temperature range. Super Draw Syn 37 Lite also produces a high-strength lu- brication film for longer tool and die life, and can be easily removed with alkaline cleaners.
Circle 430 on reader service card
METAL FINISHING ?? SEPTEMBER 1997 99
