Partner for your workshop!tiptopol.pl/viewTiptopol/files/Nowe_katalogi/EXPORT_WORKSHOP... ·...
-
Upload
nguyennhan -
Category
Documents
-
view
260 -
download
5
Transcript of Partner for your workshop!tiptopol.pl/viewTiptopol/files/Nowe_katalogi/EXPORT_WORKSHOP... ·...
Partner for your workshop!
www.tiptopol.pl
WORKSHOP EQUIPMENT
2017
2
TIP-TOPOL Sp. z o.o.62-010 Pobiedziska, ul. Kostrzyńska 33, Poland
www.tiptopol.pl
West European CustomersM. +48 887 830 101 | T. +48 61 815 27 82
e-mail: [email protected]
Central European CustomerM. +48 887 817 116 | T. +48 61 815 22 57
e-mail: [email protected]
Quality in good prices!
We equip your workshop
Two-
post
lifts
Air
cond
ition
ing
stat
ions
Rim
str
aigh
teni
ng m
achi
nes
Scis
sor
lifts
Nitr
ogen
gen
erat
ors
Whe
el b
alan
cers
for
cars
Tyre
cha
nger
s fo
r tr
ucks
Whe
el b
alan
cers
for
truc
ks
Tyre
cha
nger
s fo
r ca
rs
4 CONTENT
Thermopress machines 5
Tire changers 6
Wheel balancers 10
Lifts 13
Wheel alignment 21
AC Stations 22
Compressors 24
Nitrogen generators 27
Rim straightering machines 28
Motorcycles
Passenger cars
Light trucks
Trucks
Agriculture vehicules
Earth moving vehicles
5
Thermopress machines
Machine curing damages of diagonal and radial tires. Most minor injuries in radial and diagonal tires can be repaired in a short time. Enables repair of tire tread, side and shoulders as well as repair of inner tubes and valves. The machine assures stable temperature and vulcanization regulation time. Vulcanizing temperature of approx. 160 °C significantly reduce the time of vulcanization of tires.Power supply: 230V/50 Hz.
Available in two models: with manual pressure (Thermopress Standard) and pneumatic pressure (Thermopress Pneumatic).
Standard delivery• heating plates,• electric box with a time switch control,• extensions for heating plate: long: short, medium and long,• oval rubber cover for car tyres,• bag with granulate for car tyres,• aluminum sheet,• U profile.
TP517-0110 TP517-0100
Technical data Pneumatik StandardRef. no TP517-0110 TP517-0100
Motor power 540 W 540 W
Weight 36 kg 33 kg
Max. working pressure 10 bar –
Heating temp. 160 °C 160 °C
THERMOPRESS MACHINES
Additional equipment for Thermopress
TP517-0030 TP517-0040 TP517-0051 + TP517-0052
Ref.no DescriptionTP517-0030 Support stand, floor-mounted, with shelves for storage of small items
TP517-0040Support stand, 6 - 8 bar, for easy lifting and lowering of the machine and tyre with a pneumatic system. Rollers allow tyres to be easily turned into the repair position.Pneumatic rack. Load capacity: 200 kg, Height: 600-780 mm
TP517-0051 Adapter to cure valves
TP517-0052 Rubber for the adapter
6 TIRE CHANGERS
Invento TC 720 / TC 720 2VTire changer INVENTO TC 720 / TC 720 2V is an economic unit developed to service car wheels and van wheels. Due to many-year experience of the TIP-TOPOL company in the field of wheel service, the structure of the machine has been subject of many improvements which positively affected strength of the unit and work ergonomics.
The most substantial attributes of the machine: y pneumatically inclined fixing post y pneumatically locked assembly foot, y spring lifted and manually dropped down assembly foot.
Technical data TC 720 TC 720 2VClamp opening (hold from inside rim) 13” – 23” 13” – 23”
Clamp opening (hold from outside rim) 10” – 20” 10” – 20”
Max. wheel diam. 1040 mm 1040 mm
Max. wheel width 12” 12”
Clamp rotation 7 obr./min 7/14 obr./min
Bead breaker force 1200 kg 1200 kg
Working pressure 8 – 10 bar 8 – 10 bar
Power 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz INVTC720 / INVTC7202V
Help arm Invento HA 320B
Help arm HA320B for the tire changer TC720 is a simple but very helpful accessory making assembly and disassembly of tires easy. The arm comprises 3 elements:
y pressing roll y disk necessary to disassembly the lower foot, y joint pressing arm.
INVHA320B
INVTC5509021 Motorcylce demount head
INVTC6008831Motorcycle adaptor
MF31100149 Plastic clamp for STANDARD
type alloy rims
INVTC8000005 Jaw cover
INVTC8000025 Jaw cover long
Additional equipment for the tire changer
INVTC5509014 Plastic cover for
demounting tool
INVTC1300014Plastic cover for demounting
tool with roller
INVTC5004093 Rubber for
bead breaker
INVTC5309016 Crownbar cover
INVTC5509018 Blade cover
7
Plastic protection for mounting tool
Plastic covers for jaws
Bead breaker blade plastic protectors
Ref.no Compatible brandsMF801258383 Mondolfo / Corghi / Faip
BUG800A11 Butler / Ravaglioli
INVTC5509018 Invento / Evert(IC) / Dunlop
Ref.no Compatible brandsAM-SC-SZ01 Sicam/Beissbart / Bosch (rolka)
AM-HO-SZ01 Hofmann / John Bean / Boxer
AM-CB-SZ01 Cemb / Hofmann MP/ Giuliano
AM-SC-ST01 AM-SC-ST02 AM-HO-ST01 AM-HO-ST02 AM-CB-ST01 AM-UN-ST01
MF801258898 MF801254341 AM-BU-ST1 AM-BU-ST2 INVTC5509015 INVTC5509014 AM-MB-ST01
AM-SI-ST01 AM-SI-ST02
AM-HO-ST05 AM-HO-ST06
AM-SC-ST03 INVTC1300014
Ref.no Compatible brandsMF801258898 Mondolfo/ Corghi/ Faip
MF801254341 Mondolfo/ Corghi/ Faip
AM-BU-ST01 Butler/ Ravaglioli
AM-BU-ST02 Butler/ Ravaglioli
INVTC5509015 Invento/ Evert(IC)/ Dunlop
INVTC5509014 Invento/ Evert(IC)/ Dunlop
AM-MB-ST01 M&B/ Werther
AM-HO-ST05 Hofmann MP/Giuliano New
AM-HO-ST06 Hofmann MP/Giuliano New
Ref.no Compatible brandsAM-SC-ST01 Sicam/ Beissbart/ Bosch
AM-SC-ST02 Sicam/ Beissbart/ Bosch
AM-SC-ST03 Sicam/ Beissbart/ Bosch
AM-HO-ST01 Hofmann/ John Bean/ Boxer
AM-HO-ST02 Hofmann/ John Bean/ Boxer
AM-CB-ST01 Cemb/ Hofmann MP/ Giuliano
AM-UN-ST01 Uni-trol
AM-SI-ST01 Sice
AM-SI-ST02 Sice
INVTC1300014 Invento/ Evert(IC)/ Dunlop
AM-HO-SC01 AM-CO-SC01 AM-UN-SC01 AM-MB-SC01
MF8-1110044 Butler / Ravagliolio INVTC8000025 INVTC8000005 AM-SC-SC01
Ref.no Compatible brandsMF8-1110044 Mondolfo Ferro/ Faip
BUG800A5 Butler/ Ravaglioli 18”-22” Old
BUG800A98 Butler/ Ravaglioli 20”-22” New
BUG800A6 Butler/ Ravaglioli 24”-26”
INVTC8000025 Invento/ Evert(IC)/ Dunlop
INVTC8000005 Invento/ Evert(IC)/ Dunlop
Ref.no Compatible brandsAM-SC-SC01 Sicam/ Beissbarth/ Bosch
AM-CB-SC01 Cemb/ Giuliano/ Hofmann
AM-HO-SC01 Hofmann/ John Bean/ Boxer
AM-CO-SC01 Corghi
AM-UN-SC01 Uni-trol
AM-MB-SC01 M&B/ Werther
MF801258383BUG800A11
INVTC5509018
AM-HO-SZ01AM-SC-SZ01 AM-CB-SZ01
TIRE CHANGERS
8 TIRE CHANGERS
Tire changer Invento TC 856 / TC 856NTire changer INVENTO TC 856 is an economic machine designed to change tires of trucks, agricultural vehicles and building machines.
The most substantial attributes of the machine: y ergonomic control console, y two rotation speed, y automatically raised arm and rotated disk in Invento TC 856, y manual raised arm and rotated disk in Invento TC 856N, y hydraulic pump of recognized American company SPX.
* Using extensions -standard equipment.
Tire changer Invento TC 826Tire changer INVENTO TC 826 is an economic machine designed to service wheels of trucks.
The most substantial attributes of the machine: y ergonomic control console, y two rotation speed, y manually raised arm and rotary disk,
Technical data TC 856 / TC 856N TC 826Max. wheel width 1100 mm 760 mm
Max. wheel diam. 2200 mm 1500 mm
Chucking device capacity 14” – 42” (14” – 56”)* 14” – 26”
Dimensions of a central hole in a rim 140 – 800 mm 120 – 700 mm
Bead breaker power 2800 kg 1500 kg
Max. wheel weight 1500 kg 1000 kg
Weight of the machine 987 kg 561 kg
Power supply 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz
INVTC826
INVTC856NINVTC856
9
Mobile tire changer Invento TC 823M
Technical dataMax wheel width 600 mm
Max. wheel diam. 1300 mm
Chucking device capacity 13” - 26”
Size of the central hole in the rim 140 – 300 mm
Bead breaker power 2100 kg
Max. wheel weight 1000 kg
Weight of the machine 450 kg
Power supply 3 x 400 V / 50 Hz
TC 823 is a fully automatic, electro-hydraulic tire changer intended to service wheels of trucks, buses and agricultural vehicles’ wheels. The device has been designed to work in a mobile vehicle service. The machine is mounted inside a vehicle to suit your needs, at the side or at a rear door of a vehicle while work is carried out outside.
The most substantial attributes of the machine: y automatic rotating spindle and tire foot hammer provide optimal work, y movement of elements of the tire changer is provided due to a hydraulic system, y due to four hydraulic jaws the wheel holding is stable and safe, y control console with a long cable assures high comfort of work.
INVTC823M
Standard accessories for truck tyre changer
Additional accessories for truck tyre changer
INV2200113 Rim clamp for tubeless
truck rims
INV2200114A Rim clamp for tubeless
truck alloy rims
INVTC856.04.01 Plastic protection
for TC 856
INVTC826.00.01.00A Crowbar truck
y Large tyre lever y Small tyre lever y Rim clamp for truck
TIRE CHANGERS
10 WHEEL BALANCERS
* - XX - shaft 36 mm or 40 mm
Invento VB 500 Wheel balancer Invento VB 500 is a micro-processor unit with 19” LCD display and full automatic data entry which can handle the wheel of mass up to 65 kg.
The most substantial attributes of the machine: y automatic Start by lowering the wheel guard, y footbrake to ease locking and unlocking wheels on adaptors as well as for counterweight
fitting, y automatic braking and wheel positioning with fine approximation on external side, y self calibration and self diagnosis programs, y ALU programs and motorcycle programs, y automatic ALU-S and ALU-S1 programs, y SPLIT (Hidden Weight) program to divide counterweights behind spokes of alloy rims, y optimization program to compansate the tyre unbalance with the rim unbalance.
Invento VB 300
Invento VB 400
Wheel balancer Invento VB300 is a micro-processor unit with LED display and manual data entry which can handle the wheel of mass up to 65 kg. Simple structure and proven solutions make it is an interesting offer for mechanical stores which want to extent their services by wheel services.
The most substantial attributes of the machine: y dynamic and static balancing, y four programs 3 for aluminum rims and one for motor-cycle rims, y acoustic signalization of unbalanced location, y auto-diagnostics and unit calibration.
Wheel balancer Invento VB 400 is a micro-processor unit monochrome graphic LCD display with flat screen and automatic input of wheel distance and diameter. It can handle the wheel of mass up to 60 kg.
The most substantial attributes of the machine: y dynamic and static balancing, y start-up by keyboard , y self calibration and self diagnosis programs, y ALU programs and motorcycle programs, y automatic ALU-S and ALU-S1 programs, y SPLIT (Hidden Weight) program to divide counterweights behind spokes of alloy rims, y optimization program to compansate the tyre unbalance with the rim unbalance.
INVB300
INVB500
INVB400
11
Invento VB 600 / VB 600PWheel balancer Invento VB 600 is a micro-processor unit with 24” LCD display and full automatic data entry which can handle the wheel of mass up to 75 kg.
The most substantial attributes of the machine: y automatic start by lowering the wheel guard, y pnematic brake to ease locking and unlocking wheels on adaptors as well as for
counterweight fitting, y automatic braking and wheel positioning with fine approximation on external side, y self calibration and self diagnosis programs, y ALU programs and motorcycle programs, y automatic ALU-S and ALU-S1 programs, y SPLIT (Hidden Weight) program to divide counterweights behind spokes of alloy rims, y optimization program to compansate the tyre unbalance with the rim unbalance, y Invento VB 600P have pneumatic locking of wheel.
INVB00
Technical data VB 300 VB 400 VB 500 VB 600 / VB 600PRim width range 1,5” – 20” 1,5” – 20” 1,5” – 20” 1,5” – 20”
Rim diam. range 10” – 24” 10” – 24” 10” – 24” 10” – 30”
Max. wheel diam. 1117 mm 1016 mm 1016 mm 1016 mm
Max. wheel width 510 mm 510 mm 510 mm 510 mm
Max. wheel weight 65 kg 60 kg 65 kg 75 kg
Balancing speed 100 rpm 200 rpm 200 rpm 200 rpm
Accuracy 1 g 1 g 1 g 1 g
Balancing cycle time 10 s 8 s 8 s 6 s
Shaft 36 mm 40 mm 40 mm (Haweka)VB600 – 40mm (Haweka)
VB600P – 40mm (Pneumatic)
Power supply 230 V 230 V 230 V 230 V
Accesoriess
Quick-Nut INVB6001036 – 36x3 mm INVB6001040 – 40x3 mmINVB6001044 – 40x4 mm
Adaptor for closed rims for VB300 INVB6008836
Caliper INVB6008835
Motocykle adaptor 36mm for VB300 INVB6008839
Zmienić na Flange for vans INVB6008540 - VB300
HA190400018 - VB400/VB500/VB600
Clamping hood INVB6001101
INVB6001002 - rubber
Cones INVB600XX01 – 42-60 mm* INVB600XX02 – 54-80 mm* INVB600XX03 – 71-98 mm*
INVB600XX04 – 96-136 mm*
Cone for vans 95-175 mm INVB6008842– sahaf 36 mmINVB6009059– sahaf 40 mm
WHEEL BALANCERS
12 WHEEL BALANCERS
Tire changer Invento VB 800
Tire changer Invento VB 900
Tire changer Invento VB 800 is a cost-effective machine designed to service wheels of trucks and cars. The device is equipped with an intuitive menu enabling you to select the appropriate balancing program easily. LLKW Haweka’s set is a standard equipment.
The most substantial attributes of the machine: y 19” LCD monitor, y professional set for truck wheels balancing by Haweka, y wheel lift, y intuitive menu.
Technical data VB 800 VB 900Rim width range 2” - 20” 1,5” - 20”
Diameter range 10” - 26” 10” - 30”
Rim max. width 665 mm 665 mm
Rim max diameter 1300 mm 1300 mm
Balancing accuracy truck/car 10 g / 1g 10 g / 1g
Max. wheel weight 200 kg 250 kg
Electric power 230 V / 50 Hz 230 V / 50 Hz
Dimensions 1750 x 1400 x 1500 mm 1900 x 1750 x 1550 mm
The weight of the equipment 250 kg 250 kg
Working pressure 8-10 bar 8-10 bar
INVB800
INVB900
Wheel balancer Invento VB 900 is a micro-processor unit with 24” LCD display and automatic input of wheel distance and diameter. It is equipped with a lift wheels and it can handle the wheel of mass up to 250 kg. The most substantial attributes of the machine:
y selection of truck or car balancing modes, y easy operation with multi-functional keyboard, y automatic gauge for distance and diameter measurement, y automatic Start by lowering the wheel guard, y automatic wheel positioning with fine approximation on external side, y self calibration and self diagnosis programs, y ALU/ALU-S/ALU-S1programs for aluminum wheels, y SPLIT (Hidden Weight) program to divide counterweights behind spokes of alloy rims, y optimization program to compensate the tyre unbalance with the rim unbalance.
13
2-posts lift Invento EL 246 TL
INVEL246TL
Two post electro-hydraulic lift. Structure of the lift with a top connection at a height equal 4,16 m enables easy entry into the position. Large load--carrying capacity enables vans lifting.
2-posts lift STD-6140
Technical data STD-6140 INVENTO EL 246 TLLifting capacity 4000 kg 4600 kg
Width between posts 2800 mm 2736/2850 mm
Raising height 1900 mm 1938 mm
Minimum height 98 mm 88 mm
Height of posts 2826 mm 4162 mm
Length of the arms 740-1310, 980-1420 mm 640-1100, 900 - 1475 mm
Overall width 3420 mm 3436 / 3501 mm
Lifting time 60 s 58 s
Power of the engine 2,6 kW 3 kW
Weight of the machine 650 kg 700 kg
Electrohydraulic two post lift with 4 000 kg capacity and automatic release. Designed for passenger cars and light vans.
STD6140
POSTS LIFTS
14 POSTS LIFTS
2-posts lift Invento EL 250 L
Rubber pads
INVEL250L
INVEL002 INVEL001
Two post electro-hydraulic lift. Thanks to a very long arms has been designed to service the longest vans.
Ref. No. DescriptionINVEL002 STD-6140 lift
INVEL001 EL250L lift
AT000-1000A Rubber pad 4 cm
AT000-1000 Rubber pad 7 cm
AT000-0002 Rubber pad for hydraulic jacks
AT000-0003 Butler Torek lifts
MF4-326483 Mondolfo Ferro F P232NEC
AT000-1000A AT000-1000
AT000-0003 MF4-326483AT000-0002
Technical data INVENTO EL 250 LLifting capacity 5000 kg
Width between posts 2810 mm
Lifting height 1900 mm
Minimum height 120 mm
Posts’ height 2848 mm
Arms’ length 860 - 1800 mm
Overall width 3650 mm
Lifting time 60 s
Engine power 2,6 kW
Weight of the unit 950 kg
15
Scissor lift Invento SL 130
INVSL130
Electro-hydraulic lift SL 130 is designed to pick up vehicles up to 3 tons, up to 1 m height. Electro-hydraulic drive, mechanical locks and a beam connecting two ramps ensure safe operation. The lift is supplied with a mobile set which simplifies movement of the lift in a workshop.
Scissor lift Invento SL 230
Scissor lift Invento SL 230 NI
Electro-hydraulic lift SL 230 is designed to pick up vehicles up to 3 tons. It is equipped with two separate and hydraulically synchronized scissors as well as a mechanical lock. The lift is ideal for sites without a suitable place for 2-column lift, to pick up a car up to 1,9 m height.
Electro-hydraulic lift SL 230 Nl is designed to pick up vehicles up to 3 tons. Two separate scissors are raised and synchronized due to 4 hydraulic actuators. Retractable ramp enables assembly in foundations.
INVSL230
Invento SL 230 NI
Technical data Invento SL 130 Invento SL 230 Invento SL 230 NILifting Capacity 3 000 kg 3000 kg 3 000 kg
Max lifting height 1000 mm 1850 mm 2 030 mm
Height when folded 110 mm 115 mm 330 mm
Length of ramps 1460 – 1990 mm 1435 – 1980 mm 1540 – 1740 mm
Width of ramps 490 mm 600 mm 550 mm
Span between ramps 860 mm 800 mm 800 mm
Lifting Time 35 s 60 s 60 s
Electrical supply 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz
SCISSOR LIFTS
16 SCISSOR LIFTS
Scissor diagnostic lift Invento SL 448 LT
Scissor diagnostic lift Invento SL 448 LT PD
Diagnostic lift of a lifting capacity 4T with a built-in lift table.
Designed to diagnose suspension (inbuilt play detector) and to measure and to adjust wheel alignment.
INVSL448LT
INVSL448LTPD
Technical data Invento SL 448 LT Invento SL 448 LT PDLifting capacity 4000 kg 4000 kg
Length of the ramps 4800 mm 5400 mm
Raising height 2160 mm 2160 mm
Width of the ramps 608 mm 608 mm
Lifting time 60 s 60 s
Load capacity for the lift 7200 kg 3200 kg
Length of the lift 1500 - 2000 mm 1500 - 2000 mm
Raising height 430 mm 490 mm
Electrical power supply 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz
Air supply 6-8 bar 6-8 bar
17
Scissor diagnostic lift Invento SL 550 LT
Jacking beam 2,5T for SL448 /SL550
Scissor diagnostic lift with detector Invento SL 550 LT PD
Diagnostic lift of 5 tones load capacity with inbuilt lift table.
Designed to diagnose suspension (inbuilt play detector) and to measure and to adjust wheel aligment.
INVSL550LT
INVSL550LTPD
Technical data Invento SL 550 LT Invento SL 550 LT PDLifting Capacity 5000 kg 5000 kg
Length of ramps 5000 mm 5600 mm
Lifting height 2160 mm 2160 mm
Width of ramps 608 mm 608 mm
Lifting Time 70 s 70 s
Capacity for the lift 4000 kg 4000 kg
The length of the lift 1500 - 2000 mm 1500 - 2000 mm
Lifting height 430 mm 490 mm
Power supply 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz
Air supply 6-8 bar 6-8 bar
A lift dedicated for the whole range of scissor lifts SL448 and SL550 as well as four post lifts EL442 by Invento.
y lifting capacity: 2500 kg, y lifting height: 643 mm, y support width: 766-1626 mm y width of rolls: 830-1000 mm y power supply: 3-10 bar
INVSLHJ-75B
SCISSOR LIFTS
18 4-POSTS LIFTS
4-posts lift 4,2T Invento EL 442 / - WA
4-posts lift 6,4T Invento EL 464 / - WA
Lift equipped with ramps of length equal 4,8 m and load capacity equal 4200 kg. It is equipped with pneumatically-operated locks.WA version is dedicated for wheel alignment and contain slip plates and recesses for turntables.
Very strong and long lift dedicated for servicing vans and long cars. Model EL464 WA is for wheel alignment with recesses for turntables and slip plates.
INVEL442
INVEL464WA
Technical data Invento EL 442 Invento EL 442 WA Invento EL 464 Invento EL 464 WALifting capacity 4200 kg 4200 kg 6 400 kg 6 400 kg
Length of the ramps 4808 mm 4808 kg 5 216 mm 5 216 mm
Distance between posts 2850 mm 2850 mm 2 880 mm 2 880 mm
Lifting height 1800 mm 1850 mm 1 850 mm 1 900 mm
Width of the ramps 512 mm 524 mm 512 mm 500 mm
Power supply 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz
Air supply 6-8 bar 6-8 bar 6-8 bar 6-8 bar
19LIFTS
Electro-hydraulic mobile column lift Maxima ML4022 / ML4030
Air hydraulic jacks Cattini
Technical data YAK 215/N YAK 217/N YAK 222/N YAK 312Capacity 40 / 20 tones 40 / 20 tones 60 / 30 tones 60 / 30 /15 tones
Min height 150 mm 170 mm 220 mm 120 mm
Lifting height 300 mm 321 mm 550 mm 255 mm
Weight 39 kg 41 kg 71 kg 50 kg
Air supply 8-10 bar 8-10 bar 8-10 bar 8-10 bar
LCD screen available on the main (mother) column. Mechanical locking/parking system. Remote control for convenient use. Adjustable forks allow to use different type of vehicles. Available model with 6 columns – ML6045.
Professional air hydraulic jack from Italian company – Cattini. High quality is confirmed by 3-years warranty.Wide range of model is dedicated for:• trucks (YAK 215/N and 217/N)• Trailers (YAK 222/N)• Buses (YAK 312)
Technical data ML 4022 ML 4030Capacity per column 5 500 kg 7 500 kg
Lifting height 1 700 mm
Tyre diameter 500 – 1120 mm
Power supply 400V / 50 Hz
MXML4022 / MXML4030
CAYAK-215N CAYAK-217N CAYAK-222N CAYAK-312
GUARANTEE
GUARANTE
E
20 LIFTS
Air hydraulic jack Invento AHL 30 / AHL 40
INVAHL30 INVAHL40
Pneumatic jack J4aPneumatically controled jack consist internal telescopic guide. It’s ideal tool for tyre and body workshops.
CAJ4a
Invento AHL30 is designed for trucks. Model AHL40 is dedicated for buses and coaches. The product is characterized by a very good price-quality ratio.
Technical data AHL 30 AHL 40Capacity 30 / 15 tones 40 / 20 /10 tones
Min. height 150 mm 130 mm
Lifting height 289 mm 289 mm
Weight 38 kg 44 kg
Air supply 8-12 bar 8-12 bar
Technical data J4aCapacity 3 500 kg
Min. height 140 mm
Lifting height 395 mm
Weight 17 kg
Air supply 6-8 bar
21WHEEL ALIGNMENT
Wheel alignment 3D – Invento XD seriesInvento XD series of 3D wheel alignment are well equipped and reliable. Software contains advanced measurement and adjustment functions. Database is based on AutoData software. Three different models meet different expectations and is dedicated for pits, 4-post lift and scissor lift.
XD 550 XD 450 XD 350
AutoData
Vehicel dimensions
Tyre removing
Lift-up measurement
Engine cradle adjust
Locked Toe
Toe curve change
Camber at Zero Toe
Tire diameter
Body height
Scrub Radius
Automatic tracking / lifting
Double screen
Ref. no INVXD550 INVXD450 INVXD350
Accessories
Ref. no Description
CB74SC00170 Turntables 40 mm
INVSL002 Turntables 50 mm
MF8-34900003 Turntables 50 mm with blocks
W-BGS9977 Steering wheel level
INVSL002 MF8-3490003 W-BGS9977
22 AC STATIONS
Invento Advance is an automatic device for air conditioning system service. This model is prepared to service a new R1234yf gas and hybrid cars. Technical parameters enable service of cars, vans, trucks and agricultural vehicles.
The most substantial attributes of the machine: y prepared to handle gas R1234yf - extra charged option, y four service programs, y service of hybrid cars, y automatic valves, y thermal printer.
Invento Advance Basic is a basic automatic device designed to service air conditioners with the R134a gas. This model has many of the attributes characteristic for more expensive devices, i.e. database, thermal printer and automatically controlled valves.
The most substantial attributes of the machine: y four service programs, y automatic valves, y thermal printer, y compact size and weight.
Technical data Advance Advance BasicGas R134a or R1234yf R134a
Database Car, vans, truck Car, vans, truck
Valves Automatic Automatic
Gas cylinder, heated 20 kg 10 kg
Oil dosing, UV Automatic Automatic
Thermal printer Standard Standard
Screen LCD LCD
Service of hybrid cars Standard No
Invento Advance
Invento Advance Basic
INVADVANCE
GUARANTEE
GUARANTE
E
GUARANTEE
GUARANTE
E
INVADVANCE-B
23AC ACCESSORIES
TXST4018046 W-BGS2275 TXWT3002
TX71550 TX71500 TX13.081 / TX13.080
W-BGS6005 INVA07.500 INVA99.124
Ref. no DescriptionTXST4018046 Ozone generator 2500 mg/h
W-BGS2275 Air conditioner tool set
TXWT3002 Air conditioning disconnecting tool
TX71550 Hose crimper - manual
TX71500 Hose crimper - hydraulic
TX13.081 / TX13.080 Quick couplers – LP / HP
W-BGS6005 Digital thermometer -50°C to +500°C
INVA07.500 Filter drier for Invento AC stations
INVA99.124 5m extension hoses - Invento
TIP-TOPOL company offers wide range of products and accessories for AC business. Below are the most interesting with competitive prices.If you need more information please contact with our sales department.
24 COMPRESSORS
Piston compressors InventoThe series of INVENTO piston compressors with belt transmission are equipped with the powerful and reliable two-cylinder, single stage and two stage AB compressor units, already lubricated with oil.
Features and benefits of INVENTO piston compressors: y high performance at low running speeds, y cast iron cylinders, y reduced vibrations, which also reduces the noise level, y total absence of oil leaks thanks, y oil level inspection glass, y synthetic oil to ensure improved lubrication of moving parts, y balanced sizing of the pumping unit, electric motor and capacity of the tank, y epoxy powder painting to guarantee perfect and lasting wear.
INVAB500/981F
INVAB200/400TC INVABV300/598F/10, INVABV300/598FINVAB300/515TC
Technical data INVAB500/981F INVAB300/515TC INVAB200/400TC INVABV300/598F/10 INVABV300/598F INVAB100/248MCTank [ l ] 500 270 200 270 270 100
Overpressure [ bar] 10 10 10 10 15 10
Capasity [l/min] 1070 510 350 600 440 250
Feed voltage 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz 230 V
Motor power [ kW ] 7,5 3 2,2 4 4 1,5
Rounds per minute 1270 1280 1500 1270 1400 1240
Cylinders 2 2 2 2 2 2
Stages 2 1 1 2 2 1
Dimension [mm] 1970x590x1300 1600x560x1040 1460x640x1140 1850x670 1850x670 1100x400x830
Weight [ kg ] 260 140 102 160 160 62
Sound level [dB(A)] 78 80 74 75 75 72
25
Screw compressors The output of the belt-drive Airpol K and KT series screw compressors ranges from 20 to120m3/h with electric power ranging from 4 to15kW. Our compressors are intended for continuous operating in heavy-duty conditions. Screw compressors are modern, durable, low-noise, and energy-efficient sources of compressed air. Screw compressors are characterized by full automatic operation including: star/delta start-up, full protection against overloading and against too high oil temperature as well as indication of excessive oil and suction filter pollution. To make control over compressed air production easier compressors are equipped with microprocessor controllers as a standard.
Features and benefits of Airpol K/KT screw compressors: y 2-year warranty period for whole compressors, y screw compressor unit durability up to the first reworking of bearings ranges from 30.000 to 50.000h, y high quality of compressed air – only 3 ppm of oil and 10ºC above ambient temperature at the compressor outlet, y sound absorbing case makes it possible to place the compressor in the production hall, y energy-saving properties result from a high energy efficiency, y low operating costs are achieved thanks to competitive prices of materials and technical surveys, y comprehensive application – from mechanical engineering through food and drink industries up to pharmaceutical industry, y easy-to-operate control desk, y air treatment system (drying unit + 2 filter) – Airpol KT.
Technical data K15 / KT15 K11 / KT11 K7 / KT7Overpressure 10 (13) bar 10 (13) bar 10 (13) bar
Motor power 15 kW 11 kW 7,5 kW
Tank 500 l 500 l 500 l
Capacity (10 bar) 2000 l/min 1450 l/min 950 l /min
Capacity (13 bar) 1600 l/min 1166 l/min 783 l/min
Sound level 72 dB(A) 72 dB(A) 72 dB(A)
Feed voltage 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz
Dimension (LxWxH) [mm] 1950x660x1450 1950x660x1450 1950x660x1450
Weight 450/525 kg 440/515 kg 405/480 kg
AIRPOL K AIRPOL KT
GUARANTEE
GUARANTE
E
COMPRESSORS
26 COMPRESSORS
Refrigerant dryers
Technical description OP 30 OP 20 OP 10 OP 05Air flow 1833 l/min 1200 l/min 850 l/min 600 l/min
Connection 3/4” 3/4” 3/4” 3/4”
Power 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz
Weight 27 kg 25 kg 20 kg 19 kg
Dimensions (width x height x deep) 350 x 500 x 450 mm 350 x 500 x 450 mm 350 x 500 x 450 mm 350 x 500 x 450 mm
Refrigerant dryers remove water content from compressed air to reach the required dew point. Relative air humidity, which amounts to 100% before drying, decreases only to 21% (°.75g H2O) after the refrigerant dryer (for dew point +3°C).Compressed air that flows into the dryer has a temperature of +3°C ÷ +45°C and is initially cooled, in air/air pre-cooler, down to +14°C ÷ +23°C. Subsequently, compressed air is cooled down in the main cooler to the required +3°C dew point.
Compressed air tanks
Ref.no Tank volume Range of pressuresFIKP200-11/15 200 l 11 do 16 bar
FIKP250-11/15 250 l 11 do 16 bar
FIKP300-11/15 300 l 11 do 16 bar
FIKP400-11/15 400 l 11 do 16 bar
FIKP500-11/15 500 l 11 do 16 bar
FIKP700-11/15 700 l 11 do 16 bar
FIKP1000-11/15 1000 l 11 do 16 bar
27NITROGEN GENERATORS
Invento WA 5000
Invento WA 9000
Technical description INVWA5000 INVWA9000
The use of nitrogen High-quality filtration High-quality filtration
Nitrogen purity 95 - 99 % 95 - 99 %
Flow rate 35 - 70 l/min 170 – 250 l/min
Inlet pressure 10 bar 10 bar
Inflation pressure 7 bar 10 – 16 bar
Power supply 230 V / 50 Hz 3 x 400 V / 50 Hz
Tank volume 100 lExternal tank not supplied Tank volume 100 l
with the device - recommended capacity 200 l, rated pressure min. 16 bar (INVWA9000ZB)
INVWA5000
INVWA9000
Nitrogen generator enables recovery of the nitrogen from the air. The device is based on molecular filters that separate nitrogen from other gases. Compressed air passes through a triple filtration clearing the air from water, oils and other particulates. Then it passes through a molecular sieve filled with the coal. Acquired nitrogen is stored in a tank, while the oxygen and other gases are exhausted into the atmosphere.
The most substantial attributes of the machine: y the system generates a vacuum in a wheel before inflation, y system of automatic inflation with use of both, nitrogen and air, y a clear control console with descriptions in Polish, y professional compressed air filtration system supplying generator.
The most substantial attributes of the machine: y built-in compressor capable to get a pressure equal 16 bar, y the system generates a vacuum in a wheel before inflation, y a clear control console with descriptions in Polish, y professional compressed air filtration system supplying the generator.
28 RIM STRAIGHTENING MACHINES
Invento SW 700The INVENTO SW700 is dedicated to repair steel and aluminum wheel rims 10-24”. A wheel rim is repaired by means of a hydraulic piston and special working end caps, which are a part of the machine equipment. Repair operations are easy and take not more than few minutes. Working end caps allow to fix a damaged wheel rim in any place of its deformation. The wheel rim straightening machine is also equipped with a rim positioning head, several centering rings, various end caps, and sealing elements.
Features & Benefits: y support with a shield handle (lathe) enables to find a damage to the rim and to machine previously repaired places, y magnetic stand with adjustable test assures the ability to determine the damage, so called “beating” and curvature, y rings of various diameters enable centering of rims, y engine’s piston can be reinforced with different accessories of appropriate profiles for the various types of rims.
Technical data SW 700Range of diameters 10” to 24”
Rotates 250 rpm
The weight of the equipment 362 kg
Engine’s power 1,3 kW
Gear box YES
Pump pressure 140 bar
Power supply 3 x 400 V / 50 Hz
Dimensions (width. x deep. x height) 1400 x 1040 x 1540 mm
INVSW700
WAREHOUSE 4 000 M2
CONSUMABLES