partes de patines JOST
description
Transcript of partes de patines JOST
1770 Hayes Street Grand Haven, MI 49417 www.jostinternational.com
The right to alter specifications is reserved.
Ph. (616) 846-7700 (800) 253-5105 Fax (616) 846-0310
LT JLGPM-01 Rev.C
Example: A400R T1 17 08
Page 1 of 2
Landing Gear Product Line Prefix
A
Lube Type
__
Mounting Style
__
Footwear
__
Options
__
Travel
__
Standard Lube – 40 *Magnum Lube – 44
Outside Mount – 0 Inside Mount – 1
Universal – 0U
14 – 14” Travel 17 – 17” Travel 19 – 19” Travel
01 – Brace ears welded to upper leg
05 – Removable crank 08 – 65° angle grease fitting 14 – Gear box full of low
temp. grease with seals 38 – Removable cushion foot
for G and G3 45 – Seals on all shafts
LANDING GEAR PART NUMBER MASTER
10” x 10” Cushion Foot – G 12” x 12” Cushion Foot – G1
10” x 10” Low Profile Cushion Foot – G3 9” 3rd Disc Wheels – R1
10” x 10” x 4½” Sand Shoe – T 10” x 10” x 2” Sand Shoe – T1
10” x 12” x 4½” Sand Shoe – T2 10” x 12” x 2” Sand Shoe – T3
No Footwear – NA
Leg Speed
__
†Leave Blank for Both Legs R.H. Two Speed Leg – R L.H. One Speed Leg – L
Mounting Style
Outside Mount
Inside Mount
Sand Shoe – “T” Series
Cushion Foot – “G” Series
Low ProfileStandard
Standard Low Profile
4.5”
1.38”
2.0”
4.25”
10”x10”x4 1/2” 10”x12”x4 1/2”
T T2
10”x10”x2” 10”x12”x2”
T1 T3
10”x10” 12”x12” 10”x10”
G G1G3
Note: Grease fittings always face towards the front with the roadside crank.
† When ordering both legs, a crank, crank hanger, brace lugs and a cross shaft are included but need to be specified (see over).
For parts and accessories (see over).
Grease Fittings
Frame Width
Frame Width
Overall Length
Overall Length
4.50”
10.6” 10.3”
4.50”
* Magnum Lube includes: Gear box full of low temperature grease, sealed shafts and grease tube over screw.
(For travel dimensions see over)
1770 Hayes Street Grand Haven, MI 49417 www.jostinternational.com
The right to alter specifications is reserved.
Ph. (616) 846-7700 (800) 253-5105 Fax (616) 846-0310
LT JLGPM-01 Rev.C
Standard Accessories Cross Shaft Crank
Example: B10363.59.4
Page 2 of 2
Overall Length
LANDING GEAR ACCESSORIES
Inside Mount – B10363 Outside Mount – B10066
Overall Length (in) Standard Inside Mount= 56.5” Standard Outside Mount= 68.4” (If other length is desired see note below).
Note: Overall length = Frame width – 19.5” (for inside mount) – 7.6” (for outside mount)
From end of input
shaft Length
Example: C10592.1
Standard – C10592 Sidefold – C10591
Length 1 – 5 ¼” 2 – 8 ¼” (Standard) 3 – 10 ½” 4 – 17 ¾” 5 – 14 ¾”
Sidefold Standard
14.0” Length From end
of input shaft
Inside Mount Example: 78.9” - 19.5” = 59.4” Frame Width = 78.9” Overall Length = 59.4”
Order NumberB10261
1.00”
2.75”
Crank Hanger Travel Dimensions 9.0”
7.5”
4.5” 3.75” .62”
2.25” 2.25”
2.25” 2.25”
A1-B1 = Standard Footwear A2-B2 = Low Profile (Sand Shoe) A3-B3 = Low Profile (Cushion Foot)
*1.0” 3” 4.5”
C Upper Hsg.
*B Retracted
*A Extended
D Travel
4.5” Standard Sand Shoe
10.0” SQ. Standard
.38”
21/32” Dia. (10) Holes
*Standard Footwear *Low Profile (Sand Shoe) *Low Profile (Cushion Foot) D Travel A1-Extended B1-Retracted A2-Extended B2-Retracted A3-Extended B3-Retracted
C Upper Hsg.
14” 42 5/8” 28 5/8” 40 1/8” 26 1/8” 39 3/4” 25 3/4” 21 15/16” 17” 48 5/8” 31 5/8” 46 1/8” 29 1/8” 45 3/4” 28 3/4” 24 15/16” 19” 52 5/8” 33 5/8” 50 1/8” 31 1/8” 49 3/4” 30 3/4” 26 15/16”
5.2”
3.88”
4.5” 3”
2.75” SQ.
1.75”
* Important Note:
Extended and Retracted dimensions are located from second mounting hole as shown, which is 1.0” from centerline of shaft.
Frame Mounting Width
11.75 High Gear 12.50 Low Gear
*See note below