Partek Atlantic PFA / PTFE Valves 4182 A00.pdf · Partek Operation Tucson, AZ 3 Overview Partek...
Transcript of Partek Atlantic PFA / PTFE Valves 4182 A00.pdf · Partek Operation Tucson, AZ 3 Overview Partek...
Hydraulik - Pneumatik
KATALOG
Steffen HauptMoritzer Straße 35
01589 Riesa
Telefon: 03525 6801-0Telefax: 03525 680120
Vertrieb:
Frau KrauspeFrau Göhler
03525 68011003525 680111
[email protected]@haupt-hydraulik.de
Technischer Außendienst:
Herr Burkhardt 03525 6801130173 5834091
Partek Atlantic PFA /PTFE Valves
4182April 2003
ParParParParPartektektektektekPFA/PTFE Valves
Catalog 4182/USAMarch 2005
3-D DrawingsMaster Table of Contents Web SiteSearch
Parker Hannifin CorporationPartek OperationTucson, AZ
Table of Contents
Technical Information ........................................................................................................................................ 3
Manual ValvesMV-1 Manual PTFE Stop Cock Valve .................................................................................................. 4
MV-6 Manual PTFE Ball Valve ............................................................................................................. 6
MV-8 Manual PTFE Sampling Valve .................................................................................................... 8
MV-10 1/4” Manual PFA 2 Way Valve ..................................................................................................... 10
MV-10 1/4” Manual PFA 3 Way Valve ..................................................................................................... 12
MV-11 1/2” Manual PFA 2 Way Valve ..................................................................................................... 14
MV-11 1/2” Manual PFA 3 Way Valve ..................................................................................................... 16
MV-11 1/2” Manual PFA 2 Way Adjustable Valve ................................................................................... 18
MV-12 1” Manual PFA 2 Way Valve ........................................................................................................ 20
MV-13 Manual PFA Needle Valve .......................................................................................................... 22
MV-14 Manual PFA Stop Cock Valve.................................................................................................... 24
MV-16 3/4” Manual PFA 2 Way Valve ..................................................................................................... 26
MV-16 3/4” Manual PFA 3 Way Valve ..................................................................................................... 28
MV-16 3/4” Manual PFA Sampling Valve ................................................................................................ 30
Pneumatic ValvesPV-1 Miniature Pneumatic PTFE Valve .............................................................................................. 32
PV-10 1/4” Pneumatic PFA 2 Way Valve................................................................................................ 34
PV-10 1/4” Pneumatic PFA 3 Way Valve................................................................................................ 36
PV-11 1/2” Pneumatic PFA 2 Way Valve................................................................................................ 38
PV-11 1/2” Pneumatic PFA 3 Way Valve................................................................................................ 40
PV-11 1/2” Pneumatic PFA 2 Way Adj. Bypass Valve ............................................................................ 42
PV-12 1” Pneumatic PFA 2 Way Valve .................................................................................................. 44
PV-16 3/4” Pneumatic PFA 2 Way Valve................................................................................................ 46
PV-16 3/4” Pneumatic PFA 3 Way Valve................................................................................................ 48
PV-16 3/4” Pneumatic PFA Sampling Valve .......................................................................................... 50
Other ValvesCV-1 1/4” - 1” PTFE Check Valve ........................................................................................................ 52
RV 1/4” Relief Valve.......................................................................................................................... 54
SV-2 1/4” Solenoid Valve ..................................................................................................................... 56
Offer of Sale ........................................................................................................................................................ 58
Copyright 2003, Parker Hannifin Corporation, All Rights Reserved
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by
users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product
catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the
final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation
and its subsidiaries at any time without notice.
WARNING
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
3
OverviewPartek produces products that are made from only the finest Fuoropolymers available. These Fluoropolymers are
resistant to numerous chemicals and solvents. This information provides only a brief technical overview . For more
comprehensive technical and chemical compatibility information, please ask for Technical Bulletin 0002-T1/USA.
Fluorinated PolymersChemical Properties Electrical Properties Mechanical Properties• Resistivity to corrosive agents • Low dielectric constant • Flexibility at low temperatures
• Non-solubility • Low dissipation factor • Low coefficient of friction
• Long term weatherability • High arc resistance • Stability at high temperatures
• Non-adhesiveness • High surface resistance
• Nonflammability • High volume resistivity
PTFE is a fluorocarbon resin that is isostatically compression molded into various shapes and configurations. It is
chemically resistant to all chemicals and solvents with the exception of some molten alkali metals, molten sodium
hydroxide, elemental fluorine and certain fluorinating agents. At Partek we use PTFE for machining the bodies and
components of various valves and manifolds. It offers chemical resistance and stability at high temperatures.
Modified PTFE material is used primarily for diaphragms and bellows in our products. This material has the same
processing and chemically resistant characteristics as the standard product but offers superior cycle life and
integrity in diaphragm products.
PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether. The resultant polymer contains the car-
bon-fluorine backbone chain typical of PTFE, but unlike PTFE, does not require special fabricating techniques.
PFA pellets have good melt flow characteristics that allow for processing via extrusion, compression, blow, transfer
and injection molding methods. It has outstanding chemical and solvent resistant characteristics over a tempera-
ture range even greater than PTFE. PFA is offered in various grades of purity and cleanliness making it the mate-
rial of choice for the semiconductor market.
Cv and Kv Formulas
SGP
Q = Kv
Q = Cv
YP
P = Pressure Drop (PSIG)
SG = Specific Gravity
Q = Flow (GPM)
P = Pressure Drop (BAR)
Y = Specific Gravity (kg/cm3)
Q = Flow (LPM)
1 Kv = 14.26 Cv
“CV” flow factor is the number of gallons of fluid that pass
through a given orifice area in one minute, at a pressure
drop of 1 PSIG.
“KV” flow factor is the number of liters of fluid that pass
through a given orifice area in one minute, at a pressure
drop of 1 bar.
For operation at temperatures above ambient conditions,
please refer to the chart above for reduced pressure ratings.
PERCENT OF RATED PRESSURE VS. TEMPERATURE
204˚C14593+38-51 -18
100
90
80
40
60
70
50
30
20
0
PE
RC
EN
T O
F R
AT
ED
OP
ER
AT
ING
PR
ES
SU
RE
OPERATING TEMPERATURE
10
400˚F300200+100-60
Technical Information
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
4
Product OverviewThe MV-1 PTFE Stop Cock Valve is designed for use in
high purity semiconductor fluid applications, and is also
ideally suited for ultra-pure water and aggressive
chemicals. A precision-machined PTFE body with a
straight through flowpath is combined with a PTFE full
flow orifice stem for maximum flow, minimum pressure
drop and 1/4” turn operation. The MV-1 is offered for inline
and panel mounted applications.
FeaturesFull flow orifice.
The precision machinedstem and body providetight shut off and 1/4turn operation.
Parofluor O-Ring stemseals.
BenefitsMaximum flow at thedesired size.
Minimum pressure drop.High cycle life.
Positive body to stemseal.
SpecificationsMaterials of ConstructionWetted: PTFE, Parker ParofluorTM
Non-wetted: HDPE, PFA, PVC, PVDF, Titanate
Pressure Ranges0 to 60 PSIG (4.1 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature Ranges
Ambient: -60° - 212° F (-51° - 100° C)
Fluid: -60° - 400° F (-51° - 204° C)
MV-1 Manual Stop Cock Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
5
MV-1 Manual Stop Cock Valve
Parflare model numbers are supplied with PVDF nuts. For PFA nuts add -T to model number.
BRACKETED DIMENSIONSARE IN mm.
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
ps
i)
DE
LTA
-P (
ba
r)
0 2
5
4
10
6
15
8
20
10
25
12
30
.34
.69
1.03
1.38
1.72
2.07
7.6 15.1 22.7 30.3 37.9 45.4
.125 Orifice
.188 Orifice
.250 Orifice
.313 Orifice
.375 Orifice
.438 Orifice
4141-1-VM 59.1 8.72 052. YAW2 TPNF"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.
4241-1-VM 59.1 8.72 052. LYAW3 TPNF"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.
4341-1-VM 59.1 8.72 052. TYAW3 TPNF"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.
4126-1-VM 63. 1.5 521. YAW2 eralfraP"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.
4226-1-VM 63. 1.5 521. LYAW3 eralfraP"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.
4326-1-VM 63. 1.5 521. TYAW3 eralfraP"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.
6161-1-VM 00.3 8.24 573. YAW2 TPNF"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.
6261-1-VM 00.3 8.24 573. LYAW3 TPNF"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.
6361-1-VM 00.3 8.24 573. TYAW3 TPNF"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.
6146-1-VM 59.1 8.72 052. YAW2 eralfraP"8/3 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.
6246-1-VM 59.1 8.72 052. LYAW3 eralfraP"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.
6346-1-VM 59.1 8.72 052. TYAW3 eralfraP"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.
8181-1-VM 55.6 4.39 834. YAW2 TPNF"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.
8281-1-VM 55.6 4.39 834. LYAW3 TPNF"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.
8381-1-VM 55.6 4.39 834. TYAW3 TPNF"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.
8166-1-VM 00.3 8.24 573. YAW2 eralfraP"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.
8266-1-VM 05.2 7.53 313. LYAW3 eralfraP"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.[02.Ø ]85.63[44.1Ø ]42.51[06.
8366-1-VM 05.2 7.53 313. TYAW3 eralfraP"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.[02.Ø ]85.63[44.1Ø ]42.51[06.
1.15
[29.21]
1.23
[31.24]
3/8" PARFLARE
1/4" PARFLARE 1/4" FNPT
.50
[12.70]
3/8" FNPT
.50
[12.70]
1/2" FNPT
.63
[16.00]
E(HEX)
D (MAX.)
Ø 2.92
[74.17]
2X
3 WAY 3 WAY2 WAY
STEM TOP
A
B
C (SQ.)
PATTERN
G
H
2X
PANEL MTG. HOLE
F
2X
H
L T1/2" PARFLARE
1.35
[34.29]
ledoMrebmuN
vC vK ecifirOwolF
.gifnoCtroP
.gifnoC
]mm[nisnoisnemiD
A B C D E F G H
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
6
FeaturesFloating ball designwithout o-rings ensuresbubble tight sealing athigh pressure.
Full port design; 1/4 turnoperation with lowtorque tee handle.
Panel mounting is anoption on all sizes.
BenefitsBidirectional flow to 120psi liquid or gas; Highcycle life.
Ideal for quick shut-offin contamination-freeapplications.
Ideal for processinstrumentationapplications.
Product OverviewThe MV-6 PTFE Ball Valves are designed for use in high
purity semiconductor applications, and are also ideally
suited for use in ultra-pure water and aggressive
chemicals. All sizes have wetted parts made entirely of
PTFE. All valves are designed full port for minimal flow
restrictions and are operated 1/4 turn with minimal torque.
SpecificationsMaterials of ConstructionWetted: PTFE
Non-wetted: HDPE, PVDF and PVC
Pressure Ranges25” HG vacuum (846 mbar) to 120 PSIG (8.3 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature Ranges
Ambient: -60° - 176° F (-51° - 80° C)
Fluid: -60° - 400° F (-51° - 204° C)
MV-6 Manual Ball Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
7
ØD
E
A
B
C
MV-6 Manual Ball Valve
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
ps
i)
DE
LTA
-P (
ba
r)
0 10
1
20
2
30
3
40
4
50
5
60
6
.07
.14
.21
.28
.35
.41
38 76 113 151 189 227
1/4" FNPT1/2" FNPT 1" FNPT
BRACKETED DIMENSIONSARE IN mm.
rebmuNledoM vC vK .gifnoCwolF .gifnoCtroP]mm[nisnoisnemiD
A B C D E
0-4141-6-VM 88.1 18.62
FFO/NO
TPNF"4/1 ]49.34[37.1 ]67.61[66. ]19.37[19.2 ]92.05[89.1Ø ]72.33[13.1
0-8181-6-VM 95.6 79.39 TPNF"2/1 ]98.65[42.2 ]06.22[98. ]94.49[27.3 ]80.96[27.2Ø ]08.05[00.2
0-611611-6-VM 60.82 41.004 TPNF"1 ]77.08[81.3 ]03.53[93.1 ]00.721[00.5 ]67.111[04.4Ø ]62.46[35.2
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
8
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE, providesover five times the flex-ural life as compared toconventional PTFE.
Full flow through port.
Purge port option.
BenefitsHigher cycle life result-ing in less downtimeand lower replacementcosts.
Reduced pressure drop.
Allows system mainte-nance downstream ofvalve without disruptingmain flow.
SpecificationsMaterials of ConstructionWetted: PTFE, Modified PTFE
Non-wetted: PVDF
Pressure Ranges27” HG vacuum (913 mbar) to 120 PSIG (8.3 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature Ranges
Ambient: 0° - 212° F (17° -100° C)
Fluid: 0° - 400° F (17° - 204° C)
Product OverviewThe MV-8 PTFE Sampling Valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water or aggressive chemicals.
The design utilizes a machined PTFE body with preci-
sion machined seat and diaphragm sealing areas. A one
piece machined modified PTFE diaphragm is also uti-
lized for excellent flexibility and life. The valve incorpo-
rates a full flow through port with a low dead volume down
leg. The purge port option makes this the valve of choice
for valve manifold boxes and distribution systems.
MV-8 Manual Sampling Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
9
Parflare model numbers are supplied with PVDF nuts. For PFA nuts add -T to model number.
MV-8 Manual Sampling Valve
STYLE 2
I
D
HF
A1
B
SE
B1C
BE
B1C1C1CE
I
DSTYLE 1
P
SIZE)
PURGE
N
STYLE 4
I
D
HF
A1
B
A
PO EN
B1C
BGE
B1C1
I
D
STYLE 3
F
A
A1
H
K K1
C1
GE
B1 J1
rebmuNledoMtroPhguorhT troPgnilpmaS troPegruP
troPhguorhT troPgnilpmaS troPegruPvC vK vC vK vC vK
1-4866-8-VM 2.3 7.54 2. 8.2 A/N A/N eralfraP"2/1 eralfraP"4/1 A/N
1-212166-8-VM 0.31 6.581 6.4 7.56 A/N A/N eralfraP"4/3 eralfraP"4/3 A/N
1-82166-8-VM 0.31 6.581 3.2 8.23 A/N A/N eralfraP"4/3 eralfraP"2/1 A/N
1-46166-8-VM 3.73 6.235 2. 8.2 A/N A/N eralfraP"1 eralfraP"4/1 A/N
1-616166-8-VM 3.73 6.235 2.7 8.201 A/N A/N eralfraP"1 eralfraP"1 A/N
10-1-82166-8-VM 0.31 6.581 3.2 8.23 2. 8.2 eralfraP"4/3 eralfraP"2/1 eralfraP"4/1
50-1-82166-8-VM 0.31 6.581 3.2 8.23 1.1 7.51 eralfraP"4/3 eralfraP"2/1 eralfraP"2/1
10-1-212166-8-VM 0.31 6.581 6.4 7.56 2. 8.2 eralfraP"4/3 eralfraP"4/3 eralfraP"4/1
10-1-86166-8-VM 3.73 6.235 3.2 8.23 1.1 7.51 eralfraP"1 eralfraP"2/1 eralfraP"2/1
10-1-216166-8-VM 3.73 6.235 6.4 7.56 2. 8.2 eralfraP"1 eralfraP"4/3 eralfraP"4/1
10-1-616166-8-VM 3.73 6.235 2.7 8.201 2. 8.2 eralfraP"1 eralfraP"1 eralfraP"4/1
)ni(SNOISNEMID
ELYTS A 1A B 1B C 1C D E F G H I J 1J K 1K N P Q
-VM 1-4866-8 1 05.1 - "2/1 53.1 "4/1 51.1 65. 05.1 - - - 75.2
1-212166-8-VM 2 05.3 26.4 "4/3 64.1 "4/3 64.1 00.1 05.3 21.4 00.3 662.Ø 15.4
1-82166-8-VM 2 00.3 21.4 "4/3 64.1 "2/1 53.1 00.1 00.3 26.3 05.2 662.Ø 15.4
1-46166-8-VM 2 00.3 21.4 "1 08.1 "4/1 51.1 00.1 00.3 26.3 05.2 662.Ø 15.4
1-616166-8-VM 3 05.3 21.4 "1 08.1 "1 08.1 00.1 05.3 21.4 00.3 662.Ø 36.4
10-1-82166-8-VM 4 05.4 05.5 '2/1 53.1 "4/3 64.1 57. 05.2 31.5 00.2 662.Ø 05.4 "4/1 51.1 "4/3 64.1 57. "4/1 57.
50-1-82166-8-VM 4 36.4 57.5 '2/1 53.1 "4/3 64.1 57. 05.2 73.5 00.2 662.Ø 05.4 "2/1 53.1 "4/3 64.1 88. "2/1 29.
10-1-212166-8-VM 4 05.4 05.5 "4/3 64.1 "4/3 64.1 57. 05.2 31.5 00.2 662.Ø 05.4 "4/1 51.1 "4/3 64.1 57. "4/1 57.
10-1-86166-8-VM 4 36.4 57.5 "2/1 53.1 "1 08.1 57. 00.3 73.5 00.2 662.Ø 06.4 "2/1 53.1 "1 08.1 88. "2/1 29.
10-1-216166-8-VM 4 05.4 05.5 "4/3 64.1 "1 08.1 39. 00.3 31.5 40.2 662.Ø 06.4 "4/1 51.1 "1 08.1 57. "4/1 39.
10-1-616166-8-VM 4 05.4 05.5 "1 08.1 "1 08.1 39. 00.3 31.5 45.2 662.Ø 06.4 "4/1 51.1 "1 08.1 57. "4/1 39.
)mm(SNOISNEMID
ELYTS A 1A B 1B C 1C D E F G H I J 1J K 1K N P Q
-VM 1-4866-8 1 1.83 - "2/1 3.43 "4/1 2.92 2.41 1.83 - - - 3.56
1-212166-8-VM 2 9.88 3.711 "4/3 1.73 "4/3 1.73 4.52 9.88 6.401 2.67 67.6Ø 6.411
1-82166-8-VM 2 2.67 6.401 "4/3 1.73 "2/1 3.43 4.52 2.67 9.19 5.36 67.6Ø 6.411
1-46166-8-VM 2 2.67 6.401 "1 7.54 "4/1 2.92 4.52 2.67 9.19 5.36 67.6Ø 6.411
1-616166-8-VM 3 9.88 6.401 "1 7.54 "1 7.54 4.52 9.88 6.401 2.67 67.6Ø 6.711
10-1-82166-8-VM 4 3.411 7.931 '2/1 3.43 "4/3 1.73 1.91 5.36 3.031 8.05 67.6Ø 3.411 "4/1 2.92 "4/3 1.73 1.91 "4/1 1.91
50-1-82166-8-VM 4 6.711 0.641 '2/1 3.43 "4/3 1.73 1.91 5.36 4.631 8.05 67.6Ø 3.411 "2/1 3.43 "4/3 1.73 4.22 "2/1 4.32
10-1-212166-8-VM 4 3.411 7.931 "4/3 1.73 "4/3 1.73 1.91 5.36 3.031 8.05 67.6Ø 3.411 "4/1 2.92 "4/3 1.73 1.91 "4/1 1.91
10-1-86166-8-VM 4 6.711 0.641 "2/1 3.43 "1 7.54 1.91 2.67 4.631 8.05 67.6Ø 8.611 "2/1 3.43 "1 7.54 4.22 "2/1 1.91
10-1-216166-8-VM 4 3.411 7.931 "4/3 1.73 "1 7.54 6.32 2.67 3.031 8.15 67.6Ø 8.611 "4/1 2.92 "1 7.54 1.91 "4/1 6.32
10-1-616166-8-VM 4 3.411 7.931 "1 7.54 "1 7.54 6.32 2.67 3.031 5.46 67.6Ø 8.611 "4/1 2.92 "1 7.54 1.91 "4/1 6.32
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
10
FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Quarter turn operationwith removable handlefor tamper resistance.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Eliminates need forseparate lockout device.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, 18-8 SS, Viton seals, PTFE coated SS springs
Pressure RangesForward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
Backward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature Ranges
Ambient: 0° - 150° F (17° - 66° C)
Fluid: 0° - 266° F (17° - 130° C)
Product OverviewThe MV-10 PFA 2 Way Diaphragm Valve is designed for
use in high purity semiconductor applications. It is also
ideally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined sealing areas.
A one piece machined modified PTFE diaphragm is also
utilized for excellent flexibility and life. A full 1/4” orifice
provides maximum flow capability in a compact package.
MV-10 1/4” Manual 2 Way Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
11
PVDF SCREWCOVER
-10
1/4" PARFLARE1.23
[31.24]1.12
[28.45]
HEX NUTW/ STUD
3/8" PARFLARE3/8" PARGRIP1/4" PARGRIP
1.13 [28.70]
.40 [10.16]
[31.75]
-02
.40 [10.16]
.40 [10.16]
-01
.40 [10.16]
IN
OU
T
.88 [22.35]
APDV
F1/4"1/4"
A
LF
RE
P
R
2.20 [55.82]
.13[3.30]MAX
PANELTHK.
1.25 [31.78]
1.15 [29.21]
-00
IN
.050 R[1.30]
.527[13.39] OUT
SCREW
Ø1.250BOLT CIRCLE
Ø1.00/1.02 [25.40/25.91] PANEL HOLE (NOTE: ORIENTATION OF LOCATING SLOT DEPENDENT UPON VALVE/MOUNTING CONFIGURATION.)
LOCATING TAB
POSITION
1/4" FNPT
.56 [14.22]
MOUNTINGCONFIGURATIONS(MV-10-XXXX-XX)
.31 [7.87]
Pargrip models are supplied with PFA nuts. Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
MV-10 1/4” Manual 2 Way Valve
rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroPXX-noitarugifnoCgnitnuoM
)evobAdetcipeD(
BRACKETED DIMENSIONSARE IN mm.
XX-4401-01-VM 06. 6.8
FFO/NO
TPNF"4/1wercS=00
erauqS08.dutS/wercS=10
elcriCtloB52.1ØdutS/wercS=20
srevoCwercSFDVP=01
XX-4302-01-VM 42. 4.3 pirgraP"4/1
XX-6402-01-VM 26. 8.8 pirgraP"8/3
XX-4206-01-VM 02. 8.2 eralfraP"4/1
XX-6406-01-VM 26. 8.8 eralfraP""8/3
1.53 [38.86]
.76 [19.3]
2X .19 [4.83]2X .15 [3.81] 2X R.08 [2.03]
SLOT TYP.
1.25 [31.75] SQ.
.50 [12.7]
.20 [5.08]
seirosseccA noitpircseD
01-BS )yletarapesdloS(.ylnosledom01-XXXX-01-VMdna00-XXXX-01-VMhtiwesuroF.esaBgnitnuoMni-panSFDVP
DE
LTA
-P (
ps
i)
0
25
5
20
15
10
DE
LTA
-P (
ba
r)
1.72
1.38
1.03
.69
.34
FLOW RATE (lpm)
PRESSURE DROP VS. FLOW RATE
1.9 3.8 5.7 7.6 11.39.5
FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5
1/4" Parflare1/4" Pargrip1/4" FNPT 3/8" Parflare & Pargrip
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
12
FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Quarter turn operationwith removable handlefor tamper resistance.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Eliminates need forseparate lockout device.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, 18-8 SS, Viton seals, PTFE coated SS springs
Pressure RangesForward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
Backward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature Ranges
Ambient: 0° - 150° F (17° - 66° C)
Fluid: 0° - 266° F (17° - 130° C)
Product OverviewThe MV-10 PFA 3 Way Diaphragm Valve is designed for
use in high purity semiconductor applications. It is also
ideally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined sealing areas.
A one piece machined modified PTFE diaphragm is also
utilized for excellent flexibility and life. A full 1/4” orifice
provides maximum flow capability in a compact package.
MV-10 1/4” Manual 3 Way Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
13
PVDF SCREWCOVER
-10
1.23 [31.24]
1.12 [28.45]
HEX NUTW/ STUD
3/8" PARFLARE3/8" PARGRIP1/4" PARGRIP
1.13 [28.70]
.40 [10.16]
[31.75]
-02
.40 [10.16]
.40 [10.16]
-01
.40 [10.16]
-00
IN
.050 R[1.30]
.527[13.39] OUT
SCREW
Ø1.250BOLT CIRCLE
Ø1.00/1.02 [25.40/25.91] PANEL HOLE (NOTE: ORIENTATION OF LOCATING SLOT DEPENDENT UPON VALVE/MOUNTING CONFIGURATION.)
1/4" FNPT
.56 [14.22]
MOUNTINGCONFIGURATIONS(MV-10-XXXX-XX)
2.20 [55.82]
COMNC NO
1.15 [29.21]
1.25 [31.78]
.88 [22.35]
LOCATING TAB
POSITION
.13[3.30]MAX
PANELTHK.
.63 [15.90]
AAFFLL
AA
RRPPFF
VV
EERR
PPDD
1/4"1/4"
.31
[7.87]
1/4" PARFLARE
BRACKETED DIMENSIONSARE IN mm.
MV-10 1/4” Manual 3 Way Valve
Pargrip models are supplied with PFA nuts. Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
DE
LTA
-P (
ps
i)
0
25
5
20
15
10
DE
LTA
-P (
ba
r)
1.72
1.38
1.03
.69
.34
FLOW RATE (lpm)
PRESSURE DROP VS. FLOW RATE
1.9 3.8 5.7 7.6 11.39.5
FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5
1/4" Parflare1/4" Pargrip1/4" FNPT 3/8" Parflare & Pargrip
seirosseccA noitpircseD
01-BS )yletarapesdloS(.ylnosledom01-XXXX-01-VMdna00-XXXX-01-VMhtiwesuroF.esaBgnitnuoMni-panSFDVP
1.53 [38.86]
.76 [19.3]
2X .19 [4.83]2X .15 [3.81] 2X R.08 [2.03]
SLOT TYP.
1.25 [31.75] SQ.
.50 [12.7]
.20 [5.08]
rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroPXX-noitarugifnoCgnitnuoM
)evobAdetcipeD(
XX-4431-01-VM 06. 6.8
YAW3
TPNF"4/1wercS=00
erauqS08.dutS/wercS=10
elcriCtloB52.1ØdutS/wercS=20
srevoCwercSFDVP=01
XX-4332-01-VM 42. 4.3 pirgraP"4/1
XX-6432-01-VM 26. 8.8 pirgraP"8/3
XX-4236-01-VM 02. 8.2 eralfraP"4/1
XX-6436-01-VM 26. 8.8 eralfraP""8/3
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
14
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Submergible optionisolates all valvecomponents from theexternal environment.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Valve remains functionalwhile operating in wet orgaseous corrosiveenvironments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Pressure RangesForward: 27” HG vacuum (913 mbar) to 100 PSIG (7 bar)
Backward: 27” HG vacuum (913 mbar) to 100 PSIG (7 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature Ranges
Ambient: 0° - 150° F (17° - 66° C)
Fluid: 0° - 266° F (17° - 130° C)
Product OverviewThe MV-11 PFA 2 Way Diaphragm Valve is designed for
use in high purity semiconductor applications. It is also
ideally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined sealing areas.
A one piece machined modified PTFE diaphragm is also
utilized for excellent flexibility and life. A full 1/2” orifice
provides maximum flow capability in a compact package.
MV-11 1/2” Manual 2 Way Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
15
.375 [9.52]MAX. PANEL
WIDTH
4.98 [126.47]
2X .26 [6.60]
1.81 [46.05]
2.02 [51.33]
.55 [14.00]
Ø2.90[Ø73.66]
1/2" FNPT 3/4" PARFLARE
1/2" PARFLARE
OUT OUT
Ø1.437 [36.50]
PANEL HOLE DETAIL
PORTPORT
2X Ø.125[Ø3.18]
2.36
[59.94]
1.74
[44.17]
2.31
[58.75]
2.05 [52.10]
1/2" PARBOND 3/4" PARBOND
OUT
2.02
[51.33]
OUT
1.63
[41.35]1.56
[39.65]
.75
[19.05]
IN
TEST PORT CONNECTION, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
MV-11 1/2” Manual 2 Way Valve
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
100-11-VM 3.2 8.23
FFO/NO
eralfraP"2/1
200-11-VM 7.3 8.25 eralfraP"4/3
300-11-VM 7.3 8.25 dnobraP"2/1
400-11-VM 7.3 8.25 dnobraP"4/3
500-11-VM 7.3 8.25 TPNF"2/1
rebmuNledoM vC vK noitarugifnoCwolF noitarugifnoCtroP
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
ps
i)
DE
LTA
-P (
ba
r)
0 5
4
10
8
15
12
20
16
25
20
30
24
.28
.56
.84
1.12
1.40
1.65
19 38 57 76 95 113
1/2" ParfareAll Other Configurations
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
16
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Submergible optionisolates all valvecomponents from theexternal environment.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Valve remains functionalwhile operating in wet orgaseous corrosiveenvironments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Pressure RangesCOM to NO: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
COM to NC: 27” HG vacuum (913 mbar) to 25 PSIG (1.7 bar) minimum
NC to COM: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
with 50 PSIG (3.4 bar) maximum back pressure
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature Ranges
Ambient: 0° - 150° F (17° - 66° C)
Fluid: 0° - 266° F (17° - 130° C)
Product OverviewThe MV-11 PFA 3 Way Diaphragm Valve is designed for
use in high purity semiconductor applications. It is also
ideally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined sealing areas.
One piece machined modified PTFE diaphragms are also
utilized for excellent flexibility and life. A full 1/2” orifice
provides maximum flow capability in a compact package.
MV-11 1/2” Manual 3 Way Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
17
1/2" FNPT
NO
3/4" PARFLARE
2.01 [50.93]
2.06 [52.25]
NO
1/2" PARBOND
2.06 [52.25]
NO
3/4" PARBOND
NO
.375 [9.52] MAX.PANEL WIDTH
NC
"1/2
AP
DVP
F
COM
REA
LF
R
1.82 [46.20]
5.87 MAX. [149.07]
Ø1.636 [41.55]
1.58 [40.18]
2.88 [73.03]
MOUNTING DETAIL
Ø1.44 [36.58]
2X .68 [17.32]
[1.65]
2X R .065
PANEL HOLE DETAIL
.57 [14.40]
Ø2.93
2X Ø.26
3.23
[82.12]
2.60
[65.96]
1.30
[33.07]
[74.42]
[6.60]
1/2" PARFLARE
TEST PORT CONNECTIONS, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
MV-11 1/2” Manual 3 Way Valve
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
rebmuNledoM vC vK noitarugifnoCwolF noitarugifnoCtroP
120-11-VM 9.1 1.72
YAW3
eralfraP"2/1
220-11-VM 8.2 0.04 eralfraP"4/3
320-11-VM 8.2 0.04 dnobraP"2/1
420-11-VM 8.2 0.04 dnobraP"4/3
520-11-VM 8.2 0.04 TPNF"2/1
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
ps
i)
DE
LTA
-P (
ba
r)
0 5
4
10
8
15
12
20
16
25
20
30
24
.28
.56
.84
1.12
1.40
1.65
19 38 57 76 95 113
1/2" ParfareAll Other Configurations
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
18
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groovediaphragm to body sealassures leak freeoperation.
PVDF coated stainlesssteel spring.
Multi-turn operation.
Removable handle.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Precise flow adjustment.
Eliminates need forseparate lockout device.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Pressure RangesForward: 27” HG vacuum (913 mbar) to 100 PSIG (7 bar)
Backward: 27” HG vacuum (913 mbar) to 100 PSIG (7 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature Ranges
Ambient: 0° - 150° F (17° - 66° C)
Fluid: 0° - 266° F (17° - 130° C)
Product OverviewThe MV-11 PFA Adjustable Diaphragm Valve is designed
for use in high purity semiconductor applications. It is
also ideally suited for ultra-pure water and aggressive
chemical or gas applications. The design utilizes a molded
high purity PFA body with precision machined sealing
areas. A one piece machined modified PTFE diaphragm
is also utilized for excellent flexibility and life. Multi-turn
capability allows precise flow adjustment. A full 1/2” orifice
provides maximum flow capability in a compact package.
MV-11 1/2” Manual 2 Way Adjustable Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
19
.375 [9.52]MAX. PANEL
WIDTH
3/4" PARFLARE
OUTOUT
1/2" FNPT
Ø2.90[Ø73.66]
2X Ø1.25[Ø3.18]
1.81 [46.05]
2X .26 [6.60]
.55 [14.00]
2.02 [51.33]
4.96 [125.98]
PORT
Ø1.437 [36.50]
PORT
PANEL HOLE DETAIL
1/2" PARFLARE
2.36
[59.94]
1.74
[44.17]
2.31
[58.75]
1.63
[41.35]1.56
[39.65]
.75
[19.05]
IN
OUT
2.05 [52.10]
1/2" PARBOND 3/4" PARBOND
2.02
[51.33]
OUT
TEST PORT CONNECTION, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
MV-11 1/2” Manual 2 Way Adjustable Valve
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
rebmuNledoM vC vK noitarugifnoCwolF noitarugifnoCtroP
102-11-VM 3.2 8.23
.JDA
eralfraP"2/1
202-11-VM 7.3 8.25 eralfraP"4/3
302-11-VM 7.3 8.25 dnobraP"2/1
402-11-VM 7.3 8.25 dnobraP"4/3
502-11-VM 7.3 8.25 TPNF"2/1
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
ps
i)
DE
LTA
-P (
ba
r)
0 5
4
10
8
15
12
20
16
25
20
30
24
.28
.56
.84
1.12
1.40
1.65
19 38 57 76 95 113
1/2" ParfareAll Other Configurations
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
20
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Submergible optionisolates all valvecomponents from theexternal environment.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Valve remains functionalwhile operating in wet orgaseous corrosiveenvironments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Pressure RangesForward: 27” HG vacuum (913 mbar) to 100 PSIG (7 bar)
Backward: 27” HG vacuum (913 mbar) to 100 PSIG (7 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature Ranges
Ambient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Product OverviewThe MV-12 PFA Diaphragm Valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined seat and dia-
phragm sealing areas. A one piece machined modified
PTFE diaphragm is also utilized for excellent flexibility
and life. The valve requires three full turns from the fully
closed to fully open position. A full 1” orifice provides maxi-
mum flow capability in a compact package.
MV-12 1” Manual 2 Way Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
21
7.03 [178.56]
1.07[27.23]
4.00 [101.70]
2.32 [58.85]
3/4" PARBOND
2.59 [65.86]
1" PARFLARE
Ø4.22 [Ø107.19]
2X Ø.28 [Ø7.11]
3.75 [95.35]
1.88 [47.68]
1" PARBOND
4.28 [108.81]
2.56 [65.00]
AIR
INOUT
TEST
.26 [6.60]
AIR AND TEST PORTCONNECTIONS, 1/8” FNPT
BRACKETED DIMENSIONSARE IN mm.
MV-12 1” Manual 2 Way Valve
rebmuNledoM vC vK noitarugifnoCwolF noitarugifnoCtroP
100-21-VM 7.51 2.422
FFO/NO
dnobraP"1
200-21-VM 3.31 9.981 eralfraP"1
300-21-VM 6.9 8.241 dnobraP"4/3
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
ps
i)
DE
LTA
-P (
ba
r)
0 10
10
20
20
30
30
40
40
50
50
60
60
.7
1.4
2.1
2.8
3.5
4.2
38 76 113 151 189 227
3/4" Parbond 1" Parflare1" Parbond
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
22
FeaturesOne piece PFA stem/handle and bodies.
PFA stem stop.
Angle and straightthrough configurations,with numerous endconfigurations includingParflare available.
SpecificationsMaterials of ConstructionWetted: PFA, PTFE
Non-wetted: PFA, ETFE, PVDF
Pressure Ranges27” HG vacuum (913 mbar) to 100 PSIG (7 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature Ranges
Ambient: 0° - 212° F (17° - 100° C)
Fluid: 0° - 266° F (17° - 130° C)
BenefitsHigh strength andcorrosion resistance.
Safer operation.
Reduces connections,mounting space, andoverall cost.
Product OverviewThe MV-13 PFA Needle Valve is designed for high purity
or aggressive chemical and gas applications. The design
utilizes a molded high purity PFA body and stem as the
only wetted components. The stem sealing area is
precision machined for smooth, consistent flow. A PTFE
ferrule assures a leak tight seal between stem and body.
A PFA stem stop prevents removal of stem from body
during operation. The MV-13 is available in straight
through and angle configurations, several orifice sizes,
and numerous end connections.
MV-13 Manual Needle Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
23
Ø .26
[6.48]
Ø 1.50
[38.1]
Ø .63 [16.00]
.69 [17.53]
1.35
[34.29]
1.23
[31.24]
.56
[14.22]
.57
[14.35]
1.15
[29.21]
1.33
[33.76]
1/2" PARGRIP
1.12
[28.45]
3/8" PARGRIP
.38 [9.52]
MAX. PANEL
WIDTH
1/4" PARGRIP
1/8" PARGRIP
.52
[13.28]
1.87
[47.57] (MAX.)
1.13
[28.70]
3/8" PARFLARE
1/4" PARFLARE
.75
[19.05]
1/2" PARFLARE
3.83
[97.35]
(MAX.)
1.05
[26.54]
5.06
[128.52]
(MAX.)
3.31
[84.07]
(MAX.)
.31
[7.92]
DETAIL
PANEL HOLE
.52
[13.26]
1/4" FNPT
1/8" FNPT
INLINE ANGLED
1/4" MNPT
.55
[13.97]
Parflare and Pargrip model numbers are supplied with PFA nuts.
MV-13 Manual Needle Valve
rebmuNledoM eziSecifirO noitarugifnoCtroPteltuO/telnI noitarugifnoCwolF
001-31-VM 360. pirgraP"8/1XpirgraP"8/1
thgiartS
401-31-VM 360. eralfraP"4/1XeralfraP"4/1
501-31-VM 360. eralfraP"4/1XTPNM"4/1
021-31-VM 521. pirgraP"4/1XpirgraP"4/1
421-31-VM 521. eralfraP"8/3XeralfraP"8/3
521-31-VM 521. eralfraP"2/1XeralfraP"2/1
621-31-VM 521. TPNF"8/1XTPNF"8/1
361-31-VM 881. pirgraP"8/3XpirgraP"8/3
661-31-VM 881. pirgraP"2/1XpirgraP"2/1
071-31-VM 881. TPNF"4/1XTPNF"4/1
222-31-VM 521. eralfraP"4/1XeralfraP"4/1
elgnA322-31-VM 521. TPNF"4/1XTPNF"4/1
522-31-VM 521. eralfraP"8/3XeralfraP"8/3
Cv / Kv vs. TURNS
TURNS
Cv
Kv
0 1
0.1
2
0.2
3
0.3
4
0.4
5
0.5
6
0.6
1.43
2.86
4.28
5.71
7.14
8.57
.188 - All Configurations
.125 - All But 1/4" Pargrip
.125 - All Angle Configurations
.125 - 1/4" Pargrip
.063 - All But 1/8" Pargrip
.063 - 1/8" Pargrip
BRACKETED DIMENSIONSARE IN mm.
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
24
Product OverviewThe MV-14 PFA 2 Way Stop Cock Valve is designed for
use in high purity semiconductor applications. The design
utilizes a molded high purity PFA body, and a machined
PTFE stem. The press-fit stem assures a leak tight seal
between it and the body during operation. Valve operates
with a quick 90° turn operation and has a full 1/8” orifice.
MV-14 Manual 2 Way Stop Cock Valve
SpecificationsMaterials of ConstructionWetted: PFA, PTFE
Non-wetted: PFA, PVDF
Pressure Ranges0 to 60 PSIG (4.1 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature Ranges
Ambient: 0° - 150° F (17° - 66° C)
Fluid: 0° - 266° F (17° - 130° C)
FeaturesOne piece precisionmachined stem andmolded high purity PFAbody.
All components made ofchemical resistantmaterials.
Numerous endconfigurations,including Parflareavailable.
BenefitsMaintains system purity.
Suitable for use incorrosive environments.
Allows directinstallation, minimizingadditional connections,reducing cost.
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
25
1.05
[26.67]
.55
[13.97]
.95
[24.13]
1.63
[41.28]
1.33
[33.66]
[29.21]1.15
1.18 [29.97]
[13.97]
.55
1.13 [28.70]
.75
[19.05]
1/4" REDI-FLARE
1/8" MNPT
1/4" MNPT
1/8" PARGRIP
1/4" PARGRIP
1/4" PARFLARE
Pargrip models are supplied with PFA nuts. Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
BRACKETED DIMENSIONSARE IN mm.
MV-14 Manual 2 Way Stop Cock Valve
rebmuNledoM CV KV noitarugifnoCwolF troPtelnI troPteltuO
300-41-VM 72. 58.3
FFO/NO
pirgraP"4/1 pirgraP"4/1
400-41-VM 72. 58.3 pirgraP"4/1 TPNM"8/1
500-41-VM 72. 58.3 pirgraP"4/1 TPNM"4/1
600-41-VM 72. 58.3 TPNM"4/1 TPNM"4/1
700-41-VM 72. 58.3 eralfraP"4/1 eralfraP"4/1
510-41-VM 72. 58.3 eralfraP"4/1 TPNM"4/1
610-41-VM 72. 58.3 eralfraP"4/1 eralf-ideR"4/1
810-41-VM 72. 58.3 pirgraP"8/1 pirgraP"8/1
DE
LTA
-P (
ps
i)
0
25
5
20
15
10
DE
LTA
-P (
ba
r)
1.72
1.38
1.03
.69
.34
FLOW RATE (lpm)
PRESSURE DROP VS. FLOW RATE
1.9 3.8 5.7 7.6 11.39.5
FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5
All Configurations
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
26
Product OverviewThe MV-16 PFA diaphragm valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined seat and dia-
phragm sealing areas. A one piece machined modified
PTFE diaphragm is also utilized for excellent flexibility
and life. The MV-16’s multi-turn capability allows precise
flow adjustment. A full 3/4” orifice provides maximum flow
capability in a compact package.
MV-16 3/4” Manual PFA 2 Way Valve
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
Halar coated stainlesssteel spring.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PVDF, Viton, PTFE coated SS spring
Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
27
2.73
[69.3 mm]
3.43
[87.1 mm]
6.21
[157.8 mm]
A
1.70
[43.2 mm]
Ø4.38
[Ø111.3 mm]
4X .28
[7.1 mm]
Ø3.75
[Ø95.3 mm]
4X 75˚
EQUALLY
SPACED
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
*Ends are fused on.
MV-16 3/4” Manual PFA 2 Way Valve
rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroP]mm[ninoisnemiD
A
2160-61-VM 8.5 7.28
FFO/NO
eralfraP"4/3 ]27.041[45.5
10-2160-61-VM 8.5 7.28 gnoLeralfraP"4/3 ]95.461[84.6
6160-61-VM 9.7 6.211 *eralfraP"1 ]56.132[21.9
2170-61-VM 9.7 6.211 dnobraP"4/3 ]68.941[09.5
CRACKING PRESSURE
PRESSURE TO INLET PORT (bar)
PRESSURE TO INLET PORT (psi)
PR
ES
SU
RE
TO
OU
TL
ET
PO
RT
(p
si)
PR
ES
SU
RE
TO
OU
TL
ET
PO
RT
(b
ar)
0 24
24
48
48
72
72
96
96
120
120
144
144
1.7
3.3
5.0
6.6
8.3
9.9
1.7 3.3 5.0 6.6 8.3 9.9
SPECIFIED SEALING AREA
PRESSURE DROP VS. FLOW RATE
FLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
psi)
DE
LTA
-P (
bar)
0 10
10
20
20
30
30
40
40
50
50
60
60
.7
1.4
2.1
2.8
3.5
4.2
38 76 113 151 189 227
3/4" Parflare 3/4" Parbond, 1" Parflare
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
28
Product OverviewThe MV-16 PFA diaphragm valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined seat and dia-
phragm sealing areas. A one piece machined modified
PTFE diaphragm is also utilized for excellent flexibility
and life. The MV-16’s multi-turn capability allows precise
flow adjustment. A full 3/4” orifice provides maximum flow
capability in a compact package.
MV-16 3/4” Manual PFA 3 Way Valve
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
Halar coated stainlesssteel spring.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PVDF, Viton, PTFE coated SS spring
Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
29
2.69
[68.4 mm]
3.39
[86.2 mm]
1.66
[42.2 mm]
6.44
[163.4 mm]
Ø4.38
[Ø111.3 mm]
4X .28
[7.1 mm]
Ø3.75
[Ø95.3 mm]
4X 75˚
EQUALLY
SPACED
AB
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
*Ends are fused on.
MV-16 3/4” Manual PFA 3 Way Valve
BRACKETED DIMENSIONSARE IN mm.
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF
rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroP
]mm[nisnoisnemiD
A B
2163-61-VM 4.5 0.77
YAW3
CNMOC
ON
eralfraP"4/3 ]27.041[45.5 ]73.17[18.2
10-2163-61-VM 4.5 0.77 gnoLeralfraP"4/3 ]95.461[84.6 ]73.17[18.2
6163-61-VM 3.7 1.401 *eralfraP"1 ]56.132[21.9 ]28.511[65.4
2173-61-VM 3.7 1.401 dnobraP"4/3 ]68.941[09.5 ]39.47[59.2
2164-61-VM 4.5 0.77
stroPdesreveRYAW3
ONMOC
CN
eralfraP"4/3 ]27.041[45.5 ]73.17[18.2
10-2164-61-VM 4.5 0.77 gnoLeralfraP"4/3 ]95.461[84.6 ]73.17[18.2
6164-61-VM 3.7 1.401 *eralfraP"1 ]56.132[21.9 ]28.511[65.4
2174-61-VM 3.7 1.401 dnobraP"4/3 ]68.941[09.5 ]39.47[59.2
CRACKING PRESSURE
PRESSURE TO INLET PORT (bar)
PRESSURE TO INLET PORT (psi)
PR
ES
SU
RE
TO
OU
TL
ET
PO
RT
(p
si)
PR
ES
SU
RE
TO
OU
TL
ET
PO
RT
(b
ar)
0 24
24
48
48
72
72
96
96
120
120
144
144
1.7
3.3
5.0
6.6
8.3
9.9
1.7 3.3 5.0 6.6 8.3 9.9
SPECIFIED SEALING AREA
PRESSURE DROP VS. FLOW RATE
FLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
psi)
DE
LTA
-P (
bar)
0 10
10
20
20
30
30
40
40
50
50
60
60
.7
1.4
2.1
2.8
3.5
4.2
38 76 113 151 189 227
3/4" Parflare 3/4" Parbond, 1" Parflare
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
30
Product OverviewThe MV-16 PFA sampling valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined seat and dia-
phragm sealing areas. A one piece machined modified
PTFE diaphragm is also utilized for excellent flexibility
and life. The MV-16’s multi-turn capability allows precise
flow adjustment. The valve incorporates a full flow through
port with a low dead volume down leg.
MV-16 3/4” Manual PFA Sampling Valve
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.
Halar coated stainlesssteel spring.
Full flow through port.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Reduced pressure drop.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PVDF, Viton, PTFE coated SS spring
Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
31
6.49
[164.7 mm]
2.69
[68.4 mm]
3.39
[86.2 mm]
Ø4.38
[Ø111.3 mm]
4X .28
[7.1 mm]
Ø3.75
[Ø95.3 mm]
4X 75˚
EQUALLY
SPACED
1.66
[42.2 mm]
AB
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
MV-16 3/4” Manual PFA Sampling Valve
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
rebmuNledoM
troPhguorhT troPelpmaS
troPhguorhT troPelpmaS
]mm[nisnoisnemiD
vC vK vC vK A B
806-2165-61-VM 0.31 4.581 3.2 8.23 eralfraP"4/3 eralfraP"2/1 ]27.041[45.5 ]38.86[17.2
216-2165-61-VM 0.31 4.581 6.4 6.56 eralfraP"4/3 eralfraP"4/3 ]27.041[45.5 ]73.17[18.2
217-2165-61-VM 0.31 4.581 9.6 7.89 eralfraP"4/3 dnobraP"4/3 ]27.041[45.5 ]39.47[59.2
806-2175-61-VM 2.52 29.953 3.2 8.23 dnobraP"4/3 eralfraP"2/1 ]68.941[09.5 ]38.86[17.2
216-2175-61-VM 2.52 29.953 6.4 6.56 dnobraP"4/3 eralfraP"4/3 ]68.941[09.5 ]73.17[18.2
217-2175-61-VM 2.52 29.953 9.6 7.89 dnobraP"4/3 dnobraP"4/3 68.941[09.5 ]39.47[59.2
CRACKING PRESSURE
PRESSURE TO THROUGH PORT (bar)
PRESSURE TO THROUGH PORT (psi)
PR
ES
SU
RE
TO
SA
MP
LE
PO
RT
(p
si)
PR
ES
SU
RE
TO
SA
MP
LE
PO
RT
(b
ar)
0 24
24
48
48
72
72
96
96
120
120
144
144
1.7
3.3
5.0
6.6
8.3
9.9
1.7 3.3 5.0 6.6 8.3 9.9
SPECIFIED SEALING AREA
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
32
FeaturesPrecision machineddiaphragm manufacturedfrom the latest technologymodified PTFE. Providesover five times the flexurallife as compared toconventional PTFE.Tongue and groove sealfor positive diaphragm tobody seal.
Compact designactuator works on aslittle as 20 psi.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Isolates media fromactuator.
Ease of installation andmaintenance.
SpecificationsMaterials of ConstructionWetted: PTFE, Modified PTFE
Non-wetted: Anodized Aluminum, SS, Nitrile
Pressure RangesForward: 25” HG vacuum (846 mbar) to 20 PSIG (1.4 bar)
Back: 25” HG vacuum (846 mbar) to 20 PSIG (1.4 bar)
Actuator: 20 PSIG (1.4 bar) to 120 PSIG (8.3 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: -60° - 212° F (-51° - 100° C)
Fluid: -60° - 400° F (-51° - 204° C)
Product OverviewThe PV-1 PTFE Miniature Diaphragm Valve is designed
for use in high purity semiconductor applications, and is
also ideally suited for ultra-pure water and aggressive
chemical systems. The design utilizes a machined
modified PTFE body, seat and diaphragm ensuring
excellent flexibility and long life. The valve is available in
2 and 3 way configurations. It is ideal for low flow and
small dose injection applications.
PV-1 Miniature Pneumatic Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
33
BRACKETED DIMENSIONSARE IN mm.
PV-1 Miniature Pneumatic Valve
/ 8
1
"R
A
RG
P
PFA
PI
1/8" PARGRIP
10-32 UNF-2B
.38
.31 SQ.
Ø.50
B
.82
.23 SQ.
[ 7.94 ]
[ 5.72 ]
[ 9.53 ]
[ 12.64 ]
1/8" FNPT
.19[ 4.83 ]
[ 20.83 ]
rebmuNledoM CV KV noitarugifnoCwolF eziSecifirO noitarugifnoCtroPnoisnemiD
B
4311-1-VP 80. 1.1 CN 490. TPNF"8/1 ]56.9[83.
30-4331-1-VP 80. 1.1 YAW3 490. TPNF"8/1 ]56.9[83.
4312-1-VP 80. 1.1 CN 490. pirgraP"8/1 ]31.8[23.
30-4332-1-VP 80. 1.1 YAW3 490. pirgraP"8/1 ]31.8[23.
DE
LTA
-P (
ps
i)
0
50
10
40
30
20
DE
LTA
-P (
ba
r)
3.5
2.8
2.1
1.4
.70
FLOW RATE (lpm)
PRESSURE DROP VS. FLOW RATE
.38 .76 1.1 1.5 2.31.9
FLOW RATE (gpm).10 .20 .30 .40 .60.50
All Configurations
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
34
FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, 18-8 SS, Viton seals, PTFE coated SS springs
Pressure RangesForward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
Back: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
Actuator: 20 PSIG (1.4 bar) to 120 PSIG (8.3 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Normally Closed shown
Product OverviewThe PV-10 PFA Diaphragm Valve is designed for use in
high purity semiconductor applications. It is also ideally
suited for ultra-pure water and aggressive chemical or
gas applications. The design utilizes a molded high purity
PFA body with precision machined areas. A one piece
machined modified PTFE diaphragm is also utilized for
excellent flexibility and life. A full 1/4” orifice provides
maximum flow capability in a compact package.
PV-10 1/4” Pneumatic 2 Way Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
35
1/4" PARFLARE
Ø1.75 [44.45]
IN
OU
T
.88 [22.35]
APDV
F1/4"1/4"
A
LF
RE
P
R
1.54 [39.12]
1.23 [31.24]
1.12 [28.45]
3/8" PARFLARE3/8" PARGRIP1/4" PARGRIP
1.13 [28.70]
1/4" FNPT
.56 [14.22]
PVDF SCREWCOVER
-10
HEX NUTW/ STUD
.40 [10.16]
[31.75]
-02
.40 [10.16]
.40 [10.16]
-01
.40 [10.16]
-00
IN OUT
SCREW
Ø1.250BOLT CIRCLE
MOUNTINGCONFIGURATIONS(PV-10-XXXX-XX)
1.25 [31.78]
1.15 [29.21]
.31 [7.87]
BRACKETED DIMENSIONSARE IN mm.
PV-10 1/4” Pneumatic 2 Way Valve
AIR PORT CONNECTION, 1/8” FNPT
rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroPXX-noitarugifnoCgnitnuoM
)evobAdetcipeD(
XX-4411-01-VP 06. 6.8 CN TPNF"4/1
wercS=00
erauqS08.dutS/wercS=10
elcriCtloB52.1ØdutS/wercS=20
srevoCwercSFDVP=01
XX-4421-01-VP 06. 6.8 ON TPNF"4/1
XX-4312-01-VP 42. 4.3 CN pirgraP"4/1
XX-4322-01-VP 42. 4.3 ON pirgraP"4/1
XX-6412-01-VP 26. 8.8 CN pirgraP"8/3
XX-6422-01-VP 26. 8.8 ON pirgraP"8/3
XX-4216-01-VP 02. 8.2 CN eralfraP"4/1
XX-4226-01-VP 02. 8.2 ON eralfraP"4/1
XX-6416-01-VP 26. 8.8 CN eralfraP""8/3
XX-6426-01-VP 26. 8.8 ON eralfraP""8/3
Pargrip models are supplied with PFA nuts. Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
DE
LTA
-P (
ps
i)
0
25
5
20
15
10
DE
LTA
-P (
ba
r)
1.72
1.38
1.03
.69
.34
FLOW RATE (lpm)
PRESSURE DROP VS. FLOW RATE
1.9 3.8 5.7 7.6 11.39.5
FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5
1/4" Parflare1/4" Pargrip1/4" FNPT 3/8" Parflare & Pargrip
1.53 [38.86]
.76 [19.3]
2X .19 [4.83]2X .15 [3.81] 2X R.08 [2.03]
SLOT TYP.
1.25 [31.75] SQ.
.50 [12.7]
.20 [5.08]
seirosseccA noitpircseD
01-BS )yletarapesdloS(.ylnosledom01-XXXX-01-VPdna00-XXXX-01-VPhtiwesuroF.esaBgnitnuoMni-panSFDVP
3-D DrawingsWeb Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
36
FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel springs.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, 18-8 SS, Viton seals, PTFE coated SS springs
Pressure RangesForward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
Back: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
Actuator: 20 PSIG (1.4 bar) to 120 PSIG (8.3 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Product OverviewThe PV-10 PFA 3 Way Diaphragm Valve is designed for
use in high purity semiconductor applications. It is also
ideally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined areas. One piece
machined modified PTFE diaphragms are also utilized
for excellent flexibility and life. A full 1/4” orifice provides
maximum flow capability in a compact package.
PV-10 1/4” Pneumatic 3 Way Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
37
1.23 [31.24]
1.12 [28.45]
3/8" PARFLARE3/8" PARGRIP1/4" PARGRIP
1.13 [28.70]
1/4" FNPT
.56 [14.22]
PVDF SCREWCOVER
-10
HEX NUTW/ STUD
.40 [10.16]
[31.75]
-02
.40 [10.16]
.40 [10.16]
-01
.40 [10.16]
-00
IN OUT
SCREW
Ø1.250BOLT CIRCLE
MOUNTINGCONFIGURATIONS(PV-10-XXXX-XX)
Ø1.75 [44.45]
.63 [15.90]
1.54 [39.12]
COMNC NO
.88 [22.35]
AAFFLL
AA
RRPPFF
VV
EERR
PPDD
1/4"1/4"
1/4" PARFLARE
1.25 [31.78]
1.15 [29.21]
.31
[7.87]AIR PORT CONNECTION, 1/8” FNPT
BRACKETED DIMENSIONSARE IN mm.
PV-10 1/4” Pneumatic 3 Way Valve
rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroPXX-noitarugifnoCgnitnuoM
)evobAdetcipeD(
XX-4431-01-VP 06. 6.8
YAW3
TPNF"4/1wercS=00
erauqS08.dutS/wercS=10
elcriCtloB52.1ØdutS/wercS=20
srevoCwercSFDVP=01
XX-4332-01-VP 42. 4.3 pirgraP"4/1
XX-6432-01-VP 26. 8.8 pirgraP"8/3
XX-4236-01-VP 02. 8.2 eralfraP"4/1
XX-6436-01-VP 26. 8.8 eralfraP""8/3
Pargrip models are supplied with PFA nuts. Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
DE
LTA
-P (
ps
i)
0
25
5
20
15
10
DE
LTA
-P (
ba
r)
1.72
1.38
1.03
.69
.34
FLOW RATE (lpm)
PRESSURE DROP VS. FLOW RATE
1.9 3.8 5.7 7.6 11.39.5
FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5
1/4" Parflare1/4" Pargrip1/4" FNPT 3/8" Parflare & Pargrip
seirosseccA noitpircseD
01-BS )yletarapesdloS(.ylnosledom01-XXXX-01-VPdna00-XXXX-01-VPhtiwesuroF.esaBgnitnuoMni-panSFDVP
1.53 [38.86]
.76 [19.3]
2X .19 [4.83]2X .15 [3.81] 2X R.08 [2.03]
SLOT TYP.
1.25 [31.75] SQ.
.50 [12.7]
.20 [5.08]
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
38
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Submergible optionisolates all valvecomponents from theexternal environment.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Valve remains functionalwhile operating in wet orgaseous corrosiveenvironments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Pressure RangesForward: 27” HG vacuum (913 mbar) to 100 PSIG (7 bar)
Back: 20 PSIG (1.4 bar) with100 PSIG (7 bar) inlet pressure
50 PSIG (3.5 bar) with 50 PSIG (3.5 bar) inlet pressure
70 PSIG (4.9 bar) with 0 PSIG (0 bar) inlet pressure
Actuator: 60 PSIG (4.2 bar) to 100 PSIG (7 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Normally Closed Shown
Product OverviewThe PV-11 PFA Diaphragm Valve is designed for use in
high purity semiconductor applications. It is also ideally
suited for ultra-pure water and aggressive chemical or
gas applications. The design utilizes a molded high puri-
ty PFA body with precision machined areas. A one piece
machined modified PTFE diaphragm is also utilized for
excellent flexibility and life. A full 1/2” orifice provides max-
imum flow capability in a compact package.
PV-11 1/2” Pneumatic 2 Way Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
39
2X .26
[6.60]
1.81
[46.05]
2.02
[51.33]
.55
[14.00]
2.05
[52.10]2.02
[51.33]
1.63
[41.35]1.56
[39.65]
.75
[19.05]2.36
[59.94]
1.74
[44.17]
2.31
[58.75]
3.74
[94.87]
Ø2.90
[Ø73.66]
1/2" PARBOND 3/4" PARBOND
1/2" FNPT 3/4" PARFLARE
1/2" PARFLARE
OUT OUT
OUT OUT
IN
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
PV-11 1/2” Pneumatic 2 Way Valve
110-11-VP 3.2 8.23
ON
eralfraP"2/1
210-11-VP 7.3 8.25 eralfraP"4/3
310-11-VP 7.3 8.25 dnobraP"2/1
410-11-VP 7.3 8.25 dnobraP"4/3
510-11-VP 7.3 8.25 TPNF"2/1
100-11-VP 3.2 8.23
CN
eralfraP"2/1
200-11-VP 7.3 8.25 eralfraP"4/3
300-11-VP 7.3 8.25 dnobraP"2/1
400-11-VP 7.3 8.25 dnobraP"4/3
500-11-VP 7.3 8.25 TPNF"2/1
rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
ps
i)
DE
LTA
-P (
ba
r)
0 5
4
10
8
15
12
20
16
25
20
30
24
.28
.56
.84
1.12
1.40
1.65
19 38 57 76 95 113
1/2" ParfareAll Other Configurations
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
40
FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel springs.
Submergible optionisolates all valvecomponents from theexternal environment.
Multi-position mountingbase.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Valve remains functionalwhile operating in wet orgaseous corrosiveenvironments.
Allows for moremounting flexibility andconnector fittingreduction.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Pressure RangesCOM to NO: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
NO to COM: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
COM to NC: 27” HG vaccum (913 mbar) to 80 PSIG (5.5 bar) with
20 PSIG (1.4 bar) maximum back pressure
NC to COM: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar) with
50 PSIG (3.4 bar) maximum back pressure
Actuator: 60 PSIG (4.2 bar) to 100 PSIG (7 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Product OverviewThe PV-11 PFA 3 Way Diaphragm Valve is designed for
use in high purity semiconductor applications. It is also
ideally suited for ultra-pure water and aggressive chem-
ical or gas applications. The design utilizes a molded high
purity PFA body with precision machined areas. One piece
machined modified PTFE diaphragms are also utilized
for excellent flexibility and life. A full 1/2” orifice provides
maximum flow capability in a compact package.
PV-11 1/2” Pneumatic 3 Way Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
41
.57 [14.40]
NO
2.01 [50.93]
3/4" PARFLARE
1/2" FNPT
NO
2.88 [73.03]
2.06 [52.25]
1/2" PARBOND
2.06 [52.25]
NO
3/4" PARBOND
NC NO
2.56 [65.10]
3.18 [80.87]
Ø1.636 [41.55]
Ø 2.93[74.42]
FL
REA
P
1
D
F
AP
2" /
VR
4.54 [115.42]
1.82 [46.20]
1.28 [32.47]
1/2" PARFLARE
MOUNTING DETAIL
2X Ø .26[6.60]
1.58 [40.18]
COM
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTIONS, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
PV-11 1/2” Pneumatic 3 Way Valve
rebmuNledoM vC vK noitarugifnoCwolF noitarugifnoCtroP
120-11-VP 9.1 1.72
YAW3
eralfraP"2/1
220-11-VP 8.2 0.04 eralfraP"4/3
320-11-VP 8.2 0.04 dnobraP"2/1
420-11-VP 8.2 0.04 dnobraP"4/3
520-11-VP 8.2 0.04 TPNF"2/1
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
ps
i)
DE
LTA
-P (
ba
r)
0 5
4
10
8
15
12
20
16
25
20
30
24
.28
.56
.84
1.12
1.40
1.65
19 38 57 76 95 113
1/2" ParfareAll Other Configurations
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
42
FeaturesPrecision machineddiaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Bypass integral to valvebody to prevent stagna-tion of ultra-pure water.
Modified flowconfigurations withnumerous endconnections includingParflare available.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environment.
Prevents contaminationof media.
Reduces connections,mounting space, andoverall cost.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Pressure RangesForward: 27” HG vaccum (913 mbar) to 80 PSIG (5.5 bar) with
20 PSIG (1.4 bar) maximum back pressure
Backward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar) with
50 PSIG (3.4 bar) maximum back pressure
Actuator: 60 PSIG (4.2 bar) to 100 PSIG (7 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Product OverviewThe PV-11 Adjustable Bypass Valve is designed for use
in ultra-pure water applications. The design utilizes a
molded high purity PFA body with precision machined
seats. A machined modified PTFE diaphragm is also uti-
lized for excellent flexibility and life. The integral bypass
valve prevents the stagnation and deadheading of me-
dia in an ultra-pure water system.
PV-11 1/2” Pneumatic Adjustable Bypass Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
43
.57 [14.40]
NO
2.01 [50.93]
1/2" FNPT
3/4" PARFLARE
1.65 MAX.[41.97]
OUTLET
NONC
1.58 [40.18]
Ø1.636 [41.55]
INLET
3.18 [80.87]
2.56 [65.10]
1/2" PARFLARE
MOUNTING DETAIL
DVP
/F
1
AR
LPA
RF
" 2
E
4.54 [115.42]
1.82 [46.20]
1.28 [32.47]
2.88 [73.03]
2X Ø .26[Ø 6.60]
Ø 2.93[Ø 74.42]
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTIONS, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
PV-11 1/2” Pneumatic Adustable Bypass Valve
rebmuNledoM vC vK noitarugifnoCwolF noitarugifnoCtroP
103-11-VP 9.1 1.72
CN
eralfraP"2/1
203-11-VP 8.2 0.04 eralfraP"4/3
503-11-VP 8.2 0.04 TPNF"2/1
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
psi)
DE
LTA
-P (
bar)
0 5
4
10
8
15
12
20
16
25
20
30
24
.28
.56
.84
1.12
1.40
1.65
19 38 57 76 95 113
1/2" ParfareAll Other Configurations
Cv / Kv vs. TURNS FOR BYPASS PORT
TURNS
Cv
Kv
0 0.6
.02
1.2
.04
1.8
.06
2.4
.08
3.0
.10
3.6
.12
.29
.57
.86
1.14
1.43
1.71
All Configurations
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
44
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Submergible optionisolates all valvecomponents from theexternal environment.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Valve remains functionalwhile operating in wet orgaseous corrosiveenvironments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Pressure RangesForward: 27” HG vaccum (913 mbar) to 100 PSIG (7 bar)
Backward: 80 PSIG (5.5 bar) with 100 PSIG (3.4 bar) inlet pressure
100 PSIG (7 bar) with 60 PSIG (4.2 bar) inlet pressure
Actuator: 60 PSIG (4.2 bar) to 100 PSIG (7 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Normally Closed shown
Product OverviewThe PV-12 Diaphragm Valve is designed for use in high
purity semiconductor applications, and is also ideally suit-
ed for ultra-pure water and aggressive chemical or gas
applications. The design utilizes a molded high purity PFA
body with precision machined seat and diaphragm seal-
ing areas. A one piece machined modified PTFE dia-
phragm is also utilized for excellent flexibility and life. A
full 1” orifice provides maximum flow capability in a com-
pact package.
PV-12 1” Pneumatic 2 Way Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
45
1.07[27.23]
4.00 [101.70]
2.59 [65.86]
PARFLARE
1"
Ø4.22 [Ø107.19]
2X Ø.28 [Ø7.11]
3.75 [95.35]
1.88 [47.68]
1" PARBOND
4.28 [108.81]
2.56 [65.00]
5.78 [146.81]
.323 [82.04]
(N.O. ONLY)
2.32 [58.85]
PARBOND
3/4"
AIR AND TEST PORTCONNECTIONS, 1/8” FNPT
BRACKETED DIMENSIONSARE IN mm.
PV-12 1” Pneumatic 2 Way Valve
rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP
100-21-VP 7.51 2.422
CN
dnobraP"1
200-21-VP 3.31 9.981 eralfraP"1
300-21-VP 6.9 8.241 dnobraP"4/3
rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP
500-21-VP 7.51 2.422
ON
dnobraP"1
600-21-VP 3.31 9.981 eralfraP"1
700-21-VP 6.9 8.241 dnobraP"4/3
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
ps
i)
DE
LTA
-P (
ba
r)
0 10
10
20
20
30
30
40
40
50
50
60
60
.7
1.4
2.1
2.8
3.5
4.2
38 76 113 151 189 227
3/4" Parbond 1" Parflare1" Parbond
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
46
Product OverviewThe PV-16 PFA diaphragm valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined seat and dia-
phragm sealing areas. A one piece machined modified
PTFE diaphragm is also utilized for excellent flexibility
and life. A full 3/4” orifice provides maximum flow capabil-
ity in a compact package.
PV-16 3/4” Pneumatic PFA 2 Way Valve
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
Halar coated stainlesssteel spring.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PVDF, Viton, PTFE coated SS spring
Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.
Actuation: 60 PSIG (4.1 bar) - 120 PSIG (8.3 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
47
Ø4.38
[Ø111.3 mm]
4X .28
[7.1 mm]
Ø3.75
[Ø95.3 mm]
4X 75˚
EQUALLY
SPACED
2.73
[69.3 mm]
3.43
[87.1 mm]
1.70
[43.2 mm]
5.28
[134.0 mm]
A
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
Parflare model numbers are supplied with PVDF nuts. Also available with PFA (-T) nuts.
*Ends are fused on.
PV-16 3/4” Pneumatic PFA 2 Way Valve
rebmuNledoM CV KV X-noitarugifnoCwolF noitarugifnoCtroP]mm[ninoisnemiD
A
216X-61-VP 8.5 7.28
CN=1
ON=2
eralfraP"4/3 ]27.041[45.5
10-216X-61-VP 8.5 7.28 gnoLeralfraP"4/3 ]95.461[84.6
616X-61-VP 9.7 6.211 *eralfraP"1 ]56.132[21.9
217X-61-VP 9.7 6.211 dnobraP"4/3 ]68.941[09.5
CRACKING PRESSURE
PRESSURE TO INLET PORT (bar)
PRESSURE TO INLET PORT (psi)
PR
ES
SU
RE
TO
OU
TL
ET
PO
RT
(p
si)
PR
ES
SU
RE
TO
OU
TL
ET
PO
RT
(b
ar)
0 24
24
48
48
72
72
96
96
120
120
144
144
1.7
3.3
5.0
6.6
8.3
9.9
1.7 3.3 5.0 6.6 8.3 9.9
SPECIFIED SEALING AREA
PRESSURE DROP VS. FLOW RATE
FLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
psi)
DE
LTA
-P (
bar)
0 10
10
20
20
30
30
40
40
50
50
60
60
.7
1.4
2.1
2.8
3.5
4.2
38 76 113 151 189 227
3/4" Parflare 3/4" Parbond, 1" Parflare
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
48
Product OverviewThe PV-16 PFA diaphragm valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined seat and dia-
phragm sealing areas. A one piece machined modified
PTFE diaphragm is also utilized for excellent flexibility
and life. A full 3/4” orifice provides maximum flow capabil-
ity in a compact package.
PV-16 3/4” Pneumatic PFA 3 Way Valve
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
Halar coated stainlesssteel spring.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PVDF, Viton, PTFE coated SS spring
Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.
Actuation: 60 PSIG (4.1 bar) - 120 PSIG (8.3 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
3-D DrawingsWeb Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
49
5.53
[140.6 mm]
Ø4.38
[Ø111.3 mm]
Ø3.75
[Ø95.3 mm]
4X .28
[7.1 mm]
4X 75˚
EQUALLY
SPACED
3.39
[86.2 mm]2.69
[68.4 mm]1.66
[42.2 mm]
AB
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
Parflare model numbers are supplied with PVDF nuts. Also available with PFA (-T) nuts.
*Ends are fused on.
PV-16 3/4” Pneumatic PFA 3 Way Valve
rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroP
snoisnemiD
A B
2163-61-VP 4.5 0.77
YAW3
CNMOC
ON
eralfraP"4/3 ]mm27.041["45.5 ]mm73.17["18.2
10-2163-61-VP 4.5 0.77 gnoLeralfraP"4/3 ]mm95.461["84.6 ]mm73.17["18.2
6163-61-VP 3.7 1.401 *eralfraP"1 ]mm56.132["21.9 ]mm28.511["65.4
2173-61-VP 3.7 1.401 dnobraP"4/3 ]mm68.941["09.5 ]mm39.47["59.2
2164-61-VP 4.5 0.77
stroPdesreveRYAW3
ONMOC
CN
eralfraP"4/3 ]mm27.041["45.5 ]mm73.17["18.2
10-2164-61-VP 4.5 0.77 gnoLeralfraP"4/3 ]mm95.461["84.6 ]mm73.17["18.2
2174-61-VP 3.7 1.401 *eralfraP"1 ]mm56.132["21.9 ]mm28.511["65.4
2174-61-VP 3.7 1.401 dnobraP"4/3 ]mm68.941["09.5 ]mm39.47["59.2
CRACKING PRESSURE
PRESSURE TO INLET PORT (bar)
PRESSURE TO INLET PORT (psi)
PR
ES
SU
RE
TO
OU
TL
ET
PO
RT
(p
si)
PR
ES
SU
RE
TO
OU
TL
ET
PO
RT
(b
ar)
0 24
24
48
48
72
72
96
96
120
120
144
144
1.7
3.3
5.0
6.6
8.3
9.9
1.7 3.3 5.0 6.6 8.3 9.9
SPECIFIED SEALING AREA
PRESSURE DROP VS. FLOW RATE
FLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
psi)
DE
LTA
-P (
bar)
0 10
10
20
20
30
30
40
40
50
50
60
60
.7
1.4
2.1
2.8
3.5
4.2
38 76 113 151 189 227
3/4" Parflare 3/4" Parbond, 1" Parflare
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
50
Product OverviewThe PV-16 PFA sampling valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined seat and dia-
phragm sealing areas. A one piece machined modified
PTFE diaphragm is also utilized for excellent flexibility
and life. The valve incorporates a full flow through port
with a low dead volume down leg.
PV-16 3/4” Pneumatic PFA Sampling Valve
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.
Halar coated stainlesssteel spring.
Full flow through port.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Reduced pressure drop.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PVDF, Viton, PTFE coated SS spring
Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.
Actuation: 60 PSIG (4.1 bar) - 120 PSIG (8.3 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
51
2.73
[69.3 mm]
3.43
[87.1 mm]
Ø4.38
[Ø111.3 mm]
1.70
[43.2 mm]
5.28
[134.0 mm]
4X 75˚
EQUALLY
SPACED
4X .28
[7.1 mm]
Ø3.75
[Ø95.3 mm]
AB
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
Parflare model numbers are supplied with PVDF nuts. Also available with PFA (-T) nuts.
PV-16 3/4” Pneumatic PFA Sampling Valve
rebmuNledoM
troPhguorhT troPelpmaS
troPhguorhT troPelpmaS
snoisnemiD
vC vK vC vK A B
806-2165-61-VP 0.31 4.581 3.2 8.23 eralfraP"4/3 eralfraP"2/1 ]mm27.041["45.5 ]mm38.86["17.2
216-2165-61-VP 0.31 4.581 6.4 6.56 eralfraP"4/3 eralfraP"4/3 ]mm27.041["45.5 ]mm73.17["18.2
217-2165-61-VP 0.31 4.581 9.6 7.89 eralfraP"4/3 dnobraP"4/3 ]mm27.041["45.5 ]mm39.47[59.2
806-2175-61-VP 2.52 29.953 3.2 8.23 dnobraP"4/3 eralfraP"2/1 ]mm68.941["09.5 ]mm38.86["17.2
216-2175-61-VP 2.52 29.953 6.4 6.56 dnobraP"4/3 eralfraP"4/3 ]mm68.941["09.5 ]mm73.17["18.2
217-2175-61-VP 2.52 29.953 9.6 7.89 dnobraP"4/3 dnobraP"4/3 ]mm68.941["09.5 ]mm39.47[59.2
CRACKING PRESSURE
PRESSURE TO INLET PORT (bar)
PRESSURE TO INLET PORT (psi)
PR
ES
SU
RE
TO
OU
TL
ET
PO
RT
(p
si)
PR
ES
SU
RE
TO
OU
TL
ET
PO
RT
(b
ar)
0 24
24
48
48
72
72
96
96
120
120
144
144
1.7
3.3
5.0
6.6
8.3
9.9
1.7 3.3 5.0 6.6 8.3 9.9
SPECIFIED SEALING AREA
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
52
FeaturesPolished sealing sur-faces.
Tongue and grooveexternal seal.
Machined PTFE spring.
Numerous end configura-tions available includingParflare. Available withdifferent configurationson either end.
BenefitsLong life and superiorsealing characteristics.
Eliminates o-rings andcompatibility problems.
Low cracking pressure.
Reduces connections,mounting space, andoverall cost.
SpecificationsMaterials of ConstructionWetted: PTFE
Non-wetted: PFA, PVDF, ETFE
Cracking Pressure0.25 PSIG (.017 bar) - 0.75 PSIG (.052 bar)
Back Check Sealing Pressure5.0 PSIG (.35 bar)
Pressure Range27” Hg vacuum (913 mbar) - 120 PSIG (8.3 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesStyle 1: 32° - 212° F (0° - 100° C) Ambient
32° - 266° F (0° - 130° C) Fluid
Style 2 & 3: 50° - 212° F (10° - 100° C) Ambient
50° - 266° F (10° - 130° C) Fluid
Style 4 & 5: 60° - 212° F (10° - 100° C) Ambient
60° - 266° F (10° - 130° C) Fluid
Product OverviewThe CV-1 PTFE Check Valve is designed for use in high
purity semiconductor applications, and is also ideally
suited for ultra-pure water and aggressive chemical or
gas applications. The design utilizes machined PTFE
components to provide superior chemical resistance and
purity without requiring o-rings for sealing. The machined
PTFE spring allows for low cracking pressure operation
and minimal back pressure for resealing.
CV-1 Check Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
53
.75 [19.05]
.38 [9.65]
1/8" FNPT1/4" FNPT
1.13 [28.70]
1/4" PARGRIP 1/8" PARGRIP
3/8" FNPT
1.33 [33.76]
1/2" PARGRIP
.50 [12.70]
.50 [12.70]
1.15 [29.21]
STYLE 1
1.52 [38.61]
AR
PL
F
AR
1.23 [31.24]
3/8" PARFLARE
STYLE 2
1.43 [36.37]
1.35 [34.29]
PV
F/ 1
D
VP
D
L
A
RF
ERP
"
A
1/2" PARFLARE
2
E
1/4" PARFLARE
F1/4"
Ø1.48 [37.59]
Ø1.23 [31.24]
1.12 [28.45]
3/8" PARGRIP
Ø1.86 [47.24]
1/2" FNPT
STYLE 3
1.23 [31.24]
STYLE 4
2.16 [54.81]
Ø2.75 [69.85]
Ø3.25 [82.55]
STYLE 5
3.27 [83.06]
3/4"
VP
D
F
A
FL
RE
PR
A
3/4" PARFLARE
1.80 [45.72]
P
EAL
R
AP
R
1"F
FD
V
1" PARFLARE
1" FNPT
.78 [19.81]
1.46 [37.08]
.63[16.00]
CV-1 Check Valve
Pargrip models are supplied with PFA nuts. Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
BRACKETED DIMENSIONS ARE IN mm.
rebmuNledoM CV KV elytS noitarugifnoCtroP
2211-1-VC 16.0 87.8 1 TPNF"8/1
4411-1-VC 15.1 47.12 1 TPNF"4/1
6611-1-VC 34.2 00.53 2 TPNF"8/3
8811-1-VC 22.4 77.06 3 TPNF"2/1
616111-1-VC 00.41 6.102 5 TPNF"1
2222-1-VC 20.0 92.0 1 pirgraP"8/1
4422-1-VC 43.0 09.4 1 pirgraP"4/1
6622-1-VC 89. 11.41 1 pirgraP"8/3
8822-1-VC 71.2 52.13 2 pirgraP"2/1
4466-1-VC 62. 47.3 1 eralfraP"4/1
6666-1-VC 11.1 48.51 1 eralfraP"8/3
8866-1-VC 30.2 32.92 2 eralfraP"2/1
212166-1-VC 31.4 74.95 3 eralfraP"4/3
616166-1-VC 58.11 6.071 4 eralfraP"1
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
54
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Isolates media fromadjusting screw.
Prevent overpressurization in criticalapplications.
FeaturesOne piece precisionmachined diaphragmpoppet manufacturedfrom the latesttechnology modifiedPTFE.
Provides over five timesthe flexural life ascompared toconventional PTFE.
Tongue and groove seatand diaphragm poppetfor positive through flowshut off and diaphragmto body seal.
Field adjustable reliefpressure.
Product OverviewThe RV Relief Valve is designed for use in high purity
semiconductor applications, and is also ideally suited for
ultra-pure water and aggressive chemicals. The design
utilizes a molded PFA body with precision-machined PTFE
seats and diaphragm poppet. When a field set relief
pressure is reached, the valve opens and permits flow.
The valve resets when 25% of original setpoint is reached.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PVDF, SS, Brass, ABS, HDPE
Pressure Ranges15 PSIG (1.03 bar) - 120 PSIG (8.3 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
RV Relief Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
55
BRACKETED DIMENSIONSARE IN mm.
RV Relief Valve
1.20
[30.36]
.92
[23.34]
1.15
[29.21]
.40
[10.16]1/4" PARFLARE
.40
[10.16]
.40
[10.16]
.40
[10.16] SCREW
1.23
[31.24]
3/8" PARFLARE 1/4" FNPT
.56
[14.22]
3.37
[85.60]
rebmuNledoM vC vK noitarugifnoCwolF noitarugifnoCtroP XX-egnaRerusserPgniveileR
XX-441-VR 87. 3.11
FFO/NO
TPNF"4/1
GISP06ot51-10
GISP021ot06-20XX-426-VR 42. 5.3 eralfraP"4/1
XX-646-VR 07. 2.01 eralfraP"8/3
Parflare model numbers are supplied with PVDF nuts. Also available with PFA (-T) nuts.
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
56
SV-2 1/4” Solenoid Valve
Product OverviewThe SV-2 Solenoid Valve is designed for use in high purity
semiconductor applications, and is also ideally suited for
ultra-pure water and aggressive chemicals. The design
utilizes a molded high purity PFA body with precision
machined areas. A one-piece machined modified PTFE
diaphragm is also utilized for excellent flexibility and long
life. The valve is offered in 2 and 3 way configurations, in
3 orifice sizes, and in 2 standard voltages.
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.
Provides over five timesthe flexural life ascompared toconventional PTFE.
Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Isolates media fromsolenoid.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: Coated Aluminum, Plated Steel, SS, PFA, PVDF, Titanate
Pressure RangesForward: 0 - 80 PSIG (5.5 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: -60° - 212° F (-51° - 100° C)
Fluid: -60° - 400° F (-51° - 204° C)
Solenoid Ratings24 VDC, 115 VAC (Double Wire)
All models rated at 9 watts at 68°F (20°C)
Coil Duty Cycle: 100%, however, 100% continuous duty may affect
performance of valve, therefore 50% continuous
duty is recommended.
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
57
SV-2 1/4” Solenoid Valve
BRACKETED DIMENSIONSARE IN mm.
OU
TNIINO
COM
NC
.87 [22.14]
1.25 C/L
.40 [10.16]
.57 [14.35]
Ø1.65
SCREW
.40 [10.16]
.40 [10.16]
[31.75]
Ø
1.24 [31.51]
3.97 [100.93]
.40 [10.16]
1/4" FNPT
3-WAY VALVE 2-WAY VALVE
rebmuNledoM CV KV noitarugifnoCwolF eziSecifirO noitarugifnoCtroP X-egatloVdioneloS
X-4411-2-VS 06. 6.8 CN 052. TPNF"4/1CDV42=2
CAV511=7X-4421-2-VS 06. 6.8 ON 052. TPNF"4/1
X-4431-2-VS 06. 6.8 YAW3 052. TPNF"4/1
DE
LTA
-P (
ps
i)
0
25
5
20
15
10
DE
LTA
-P (
ba
r)
1.72
1.38
1.03
.69
.34
FLOW RATE (lpm)
PRESSURE DROP VS. FLOW RATE
1.9 3.8 5.7 7.6 11.39.5
FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5
All Configurations
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
58
1. Terms and Conditions of Sale: All descriptions, quotations, proposals,offers, acknowledgments, acceptances and sales of Seller’s products aresubject to and shall be governed exclusively by the terms and conditionsstated herein. Buyer’s acceptance of any offer to sell is limited to theseterms and conditions. Any terms or conditions in addition to, or inconsistentwith those stated herein, proposed by Buyer in any acceptance of an offerby Seller, are hereby objected to. No such additional, different or inconsis-tent terms and conditions shall become part of the contract between Buyerand Seller unless expressly accepted in writing by Seller. Seller’s accep-tance of any offer to purchase by Buyer is expressly conditional uponBuyer’s assent to all the terms and conditions stated herein, including anyterms in addition to, or inconsistent with those contained in Buyer’s offer,Acceptance of Seller’s products shall in all events constitute such assent.2. Payment: Payment shall be made by Buyer net 30 days from the dateof delivery of the items purchased hereunder. Amounts not timely paid shallbear interest at the maximum rate permitted by law for each month or portionthereof that the Buyer is late in making payment. Any claims by Buyer foromissions or shortages in a shipment shall be waived unless Seller receivesnotice thereof within 30 days after Buyer’s receipt of the shipment.3. Delivery: Unless otherwise provided on the face hereof, delivery shall bemade F.O.B. Seller’s plant. Regardless of the method of delivery, however,risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Anydelivery dates shown are approximate only and Seller shall have no liabilityfor any delays in delivery.4. Warranty: Seller warrants that the items sold hereunder shall be freefrom defects in material or workmanship for a period of 18 months from dateof shipment from Parker Hannifin Corporation. THIS WARRANTY COM-PRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMSPROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY,GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER.ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MER-CHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS,IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, ORCOURSE OF DEALING ARE HEREBY DISCLAIMED.NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRAN-TIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY ORPARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS.5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR INANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACTSHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENTOF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BYBUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLERBE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIALDAMAGES OF ANY KIND OR NATURE WHATSOEVER, INC.LUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR INANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLDHEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OFCONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, IN-CLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARNOR STRICT LIABILITY.6. Changes, Reschedules and Cancellations: Buyer may request tomodify the designs or specifications for the items sold hereunder as well asthe quantities and delivery dates thereof, or may request to cancel all or partof this order, however, no such requested modification or cancellation shallbecome part of the contract between Buyer and Seller unless accepted bySeller in a written amendment to this Agreement. Acceptance of any suchrequested modification or cancellation shall be at Seller’s discretion, andshall be upon such terms and conditions as Seller may require.7. Special Tooling: A tooling charge may be imposed for any specialtooling, including without limitation, dies, fixtures, molds and patterns,acquired to manufacture items sold pursuant to this contract. Such specialtooling shall be and remain Seller’s property notwithstanding payment ofany charges by Buyer. In no event will Buyer acquire any interest inapparatus belonging to Seller which is utilized in the notwithstanding anycharges paid by Buyer. Unless otherwise agreed, Seller shall have the rightto alter, discard or otherwise dispose of any special tooling or other propertyin its sole discretion at any time.
8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,confidential information or equipment furnished by Buyer or any other itemswhich become Buyer’s property, may be considered obsolete and may bedestroyed by Seller after two (2) consecutive years have elapsed withoutBuyer placing an order for the items which are manufactured using suchproperty, Seller shall not be responsible for any loss or damage to suchproperty while it is in Seller’s possession or control.9. Taxes: Unless otherwise indicated on the face hereof, all prices andcharges are exclusive of excise, sales, use, property, occupational or liketaxes which may be imposed by any taxing authority upon the manufacture,sale or delivery of the items sold hereunder. If any such taxes must be paidby Seller or if Seller is liable for the collection of such tax, the amount thereofshall be in addition to the amounts for the items sold. Buyer agrees to payall such taxes or to reimburse Seller therefore upon receipt of its invoice. IfBuyer claims exemption from any sales, use or other tax imposed by anytaxing authority, Buyer shall save Seller harmless from and against anysuch tax, together with any interest or penalties thereon which may beassessed if the items are held to be taxable.10. Indemnity For Infringement of Intellectual Property Rights: Sellershall have no liability for infringement of any patents, trademarks, copy-rights, trade dress, trade secrets or similar rights except as provided in thisPart 10. Seller will defend and indemnify Buyer against allegations ofinfringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress andtrade secrets (hereinafter ‘Intellectual Property Rights’). Seller will defendat its expense and will pay the cost of any settlement or damages awardedin an action brought against Buyer based on an allegation that an item soldpursuant to this contract infringes the Intellectual Property Rights of a thirdparty. Seller’s obligation to defend and indemnify Buyer is contingent onBuyer notifying Seller within ten (10) days after Buyer becomes aware ofsuch allegations of infringement, and Seller having sole control over thedefense of any allegations or actions including all negotiations for settle-ment or compromise. If an item sold hereunder is subject to a claim that itinfringes the Intellectual Property Rights of a third party, Seller may, at itssole expense and option, procure for Buyer the right to continue using saiditem, replace or modify said item so as to make it noninfringing, or offer toaccept return of said item and return the purchase price less a reasonableallowance for depreciation. Notwithstanding the foregoing, Seller shallhave no liability for claims of infringement based on information provided byBuyer, or directed to items delivered hereunder for which the designs arespecified in whole or part by Buyer, or infringements resulting from themodification, combination or use in a system of any item sold hereunder.The foregoing provisions of this Part 10 shall constitute Seller’s sole andexclusive liability and Buyer’s sole and exclusive remedy for infringementof Intellectual Property Rights.If a claim is based on information provided by Buyer or if the design for anitem delivered hereunder is specified in whole or in part by Buyer, Buyershall defend and indemnify Seller for all costs, expenses or judgmentsresulting from any claim that such item infringes any patent, trademark,copyright, trade dress, trade secret or any similar right.11. Force Majeure: Seller does not assume the risk of and shall not be liablefor delay or failure to perform any of Seller’s obligations by reason ofcircumstances beyond the reasonable control of Seller (hereinafter ‘Eventsof Force Majeure’). Events of Force Majeure shall include without limitation,accidents, acts of God, strikes or labor disputes, acts, laws, rules orregulations of any government or government agency, fires, floods, delaysor failures in delivery of carriers or suppliers, shortages of materials and anyother cause beyond Seller’s control.12. Entire Agreement/Governing Law: The terms and conditions set forthherein, together with any amendments, modifications and any differentterms or conditions expressly accepted by Seller in writing, shall constitutethe entire Agreement concerning the items sold, and there are no oral orother representations or agreements which pertain thereto. This Agree-ment shall be governed in all respects by the law of the State of Ohio. Noactions arising out of the sale of the items sold hereunder or this Agreementmay be brought by either party more than two (2) years after the cause ofaction accrues.
9/91-P
The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorizeddistributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. Thisoffer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s order for any such items,when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute acceptanceof this offer.
Offer of Sale
Web Site 3-D DrawingsMaster Table of Contents Search
Parker’Parker’Parker’Parker’Parker’s Chars Chars Chars Chars Charterterterterter
To be a leading worldwide manufacturer of compo-
nents and systems for the builders and users of durable
goods. More specifically, we will design, market and
manufacture products controlling motion, flow and pres-
sure. We will achieve profitable growth through premier
customer service.
PrPrPrPrProduct Inforoduct Inforoduct Inforoduct Inforoduct Informationmationmationmationmation
North American customers seeking product information,
the location of a nearby distributor, or repair services
will receive prompt attention by calling the Parker
Product Information Center at our toll-free
number: 1-800-C-PARKER (1-800-272-7537). In
Europe, call 00800-C-PARKER-H (00800-2727-5374).
The Fluid ConnectorsGroup designs, manufacturesand markets rigid and flexibleconnectors, and associatedproducts used in pneumaticand fluid systems.
The Hydraulics Groupdesigns, produces and mar-kets a full spectrum of hy-raulic components and sys-tems to builders and users ofindustrial and mobile machin-ery and equipment.
The Automation Groupis a leading supplier of pneu-matic and electromechanicalcomponents and systems toautomation customers world-wide.
The Seal Group designs,manufactures and distributesindustrial and commercialsealing devices and relatedproducts by providingsuperior quality and totalcustomer satisfaction.
The Filtration Groupdesigns, manufactures andmarkets quality filtration andclarification products, provid-ing customers with the bestvalue, quality, technical sup-port, and global availability.
The InstrumentationGroup is a global leader inthe design, manufacture anddistribution of high-qualitycritical flow components forworldwide process instrumen-tation, ultra-high-purity, medi-cal and analytical applica-tions.
About Parker Hannifin CorporationAbout Parker Hannifin CorporationAbout Parker Hannifin CorporationAbout Parker Hannifin CorporationAbout Parker Hannifin Corporation
Parker Hannifin is a leading global motion-control
company dedicated to delivering premier customer
service. A Fortune 500 corporation listed on the New
York Stock Exchange (PH), our components and sys-
tems comprise over 1,400 product lines that control
motion in some 1,000 industrial and aerospace mar-
kets. Parker is the only manufacturer to offer its
customers a choice of hydraulic, pneumatic, and
electromechanical motion-control solutions. Our Com-
pany has the largest distribution network in its field,
with over 7,500 distributors serving nearly 400,000 cus-
tomers worldwide.
Parker Hannifin Corporation6035 Parkland Blvd.Cleveland, Ohio 44124-4141Telephone: (216) 896-3000Fax: (216) 896-4000www.parker.com
Parker Hannifin Corporation
The Aerospace Group isa leader in the development,design, manufacture and ser-vicing of control systems andcomponents for aerospaceand related high-technologymarkets, while achievinggrowth through premier cus-tomer service.
The Climate & IndustrialControls Group designs,manufactures and markets sys-tem-control and fluid-handling components and sys-tems to refrigeration, air-condi-tioning and industrial custom-ers worldwide.
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek7075 East Southpoint RoadTucson, AZ 85706 USATel: (520) 574-2600Fax: (520) 574-2700http://www.parker.com/partek
Catalog 4182R03/05
Web Site 3-D DrawingsMaster Table of Contents Search