Part 2 Mounting and Attachments
-
Upload
zayed-khan -
Category
Documents
-
view
218 -
download
0
description
Transcript of Part 2 Mounting and Attachments
7/21/2019 Part 2 Mounting and Attachments
http://slidepdf.com/reader/full/part-2-mounting-and-attachments 1/7
Islamic University of Technology IUT)
لج معة سمية لتكنولوجي
Université slamique de Technologie
Dr. Mohammad Ahsan Habib
Assistant Professor
E-mail: [email protected]
Department of Mechanical and Chemical Engineering (MCE)
Room: 405, Level 4, First Academic Building
MCE 4627 Machine Tools
Part 2
Mounting of Jobs and ToolsMachine Tools Attachments
1
MCE 4627 Machine Tools
© Dr. Mohammad Ahsan Habib
Methods of mounting of jobs and
cutting tools in machine tools
Thu, 13 Jun, 2013
2:29:54 PM
2
MCE 4627 Machine Tools
© Dr. Mohammad Ahsan Habib
Principles and Conditional Requirements
(a) while mounting the job or blank in the machine tool
• appropriate selection of work holding device or system from the available
resources depending upon;
configuration of the machine tool
shape, size and weight of the blank
kind of machining work to be done
order of dimensional accuracy desired
volume (number of same job) of production
• correct location, strong support and rigid clamping of the blank against the
cutting and other forces
• easy and quick loading and unloading to and from the machine tool or the
holding device
• proper alignment like coaxiality, concentricity etc. of rotating jobs
• free flow of chips and cutting fluid
Thu, 13 Jun, 2013
2:29:55 PM
3
MCE 4627 Machine Tools
© Dr. Mohammad Ahsan Habib
(b) while mounting the cutting tools
• appropriate selection of tool holder and the method of mounting
• proper positioning and orientation of the tool depending upon its
type
size and shape
geometry
• proper alignment in respect of coaxiality, concentricity and machine tool
configuration
• accurate and quick locating, strong support and rigid clamping
• minimization of run out and deflection during cutting operation
• easy and quick mounting and change
• unobstructed chip flow and cutting fluid action.
Thu, 13 Jun, 2013
2:29:57 PM
4
7/21/2019 Part 2 Mounting and Attachments
http://slidepdf.com/reader/full/part-2-mounting-and-attachments 2/7
7/21/2019 Part 2 Mounting and Attachments
http://slidepdf.com/reader/full/part-2-mounting-and-attachments 3/7
7/21/2019 Part 2 Mounting and Attachments
http://slidepdf.com/reader/full/part-2-mounting-and-attachments 4/7
7/21/2019 Part 2 Mounting and Attachments
http://slidepdf.com/reader/full/part-2-mounting-and-attachments 5/7
7/21/2019 Part 2 Mounting and Attachments
http://slidepdf.com/reader/full/part-2-mounting-and-attachments 6/7
7/21/2019 Part 2 Mounting and Attachments
http://slidepdf.com/reader/full/part-2-mounting-and-attachments 7/7