Part 1: Marketing Campaign
description
Transcript of Part 1: Marketing Campaign
Part 1: Marketing Campaign• Create a marketing campaign for a new industrial
design company that manufactures vehicles for NASA that can perform on Land, Air, Water, and Spaces. Please include the following deliverables in part one.– Company brief: include name, logo, slogan, and brief history(1 para.)– Poster presentation: include with company name, logo, and slogan in
a NASA badge format– Prototype designs: include 2 drawing of each vehicle– Introduction: Verbal presentation introducing your vehicle. Please
include general information like name of the vehicles, specification, specialties, and guarantees (speed, distance, power, etc.).
IDEAS FOR LOGOS
Part 2: Land, Air, Water, Space• Create a vehicle that can travel on or in Land, Air, Water, and Space (Note
because of time constraints we will omit Water). Please include the following:
– Air Powered Paper Rockets: Design a minimum of two paper rockets per company• Select 2 sheets of paper for your rockets• Select up to 2 sheet for rocket fins• Select a cone tip for each rocket• Roll your paper on the colored pcv rolls and tape the paper together with clear tape • Use low temp hot glue to attach the cone tip• Take clear tape to attach fins • Personalize your rocket based on your companies marketing campaign.
– Air Powered Car: Design a wooden air powered car please include the following:• Select the wood design packet• Follow the directions to build your car• Drill a one inch hole on the back of the car to insert the air power stick• Screw two eyelet screws under the bottom of your vehicle for the drag line• Paint and design your car based on the marketing campaign you create (vehicle doesn’t have to look
exactly like the drawing but have some similarities)• Complete a basic roll test to see if how your vehicle functions
SECME Got’s S.T.E.A.MThe L.A.W.S of Transportation
byKenton D. Wesby
Activity Sheet