Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F
description
Transcript of Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F
![Page 1: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/1.jpg)
Reference InformationDocument Type Parameter
Date 2011-03-23 11:22
Compare scope WBTS WBTS4.0 F / WBTS6.0 F
Managed Object P
ANTL
ANTL
ANTL
ANTL
ANTL
ANTL
ANTL
ANTL
ANTL
ANTL
ANTL
ANTL
ANTL
ANTL
ANTL
BTSSC
BTSSC
BTSSC
BTSSC
AnAntAntAntCabFeeFeeFleMulMulMulMulProTotVelAssAutBTSBTS
![Page 2: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/2.jpg)
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSBTSCabCanComConDesDesExtExtExtGPSHSDHSDHSDHSDHSDHSUHSUHW In In Ini
![Page 3: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/3.jpg)
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
IntIubLinLinMaiMaxMidMinModModModModModNamNumPasPatPolProProQoSRNCRes
![Page 4: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/4.jpg)
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
BTSSC
LCEL
LCEL
LCEL
LCEL
LCEL
LCEL
LCEL
LCEL
LCEL
LCEL
LCEL
SchSerSevShaSitStaTimUniUniUniVarVerAlloAntCell DefExpFiltIntLocMapMaxRAC
![Page 5: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/5.jpg)
LCEL
LCEL
LCELG
LCELG
LCELG
LCELG
LCELG
LCELG
LCELG
LCELG
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
ShuShuAccCell Cell DedHSUHSUHSULoc3GPAISActAntAntAntAntAntAntAntAntBasCon
![Page 6: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/6.jpg)
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
DowFauGaiInsInsLNAMHAMHAMHAMHAMaxMinProScaSecSerSubTMATMATMATMATMAUpli
![Page 7: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/7.jpg)
MHA
RET
RET
RET
RET
RET
RET
RET
RET
RET
RET
RET
RET
RET
RET
RET
RET
RET
RET
RET
RET
RET
RET
WMH3GPActAntAntAntAntAntAntAntAntAntAntAntAntBasConInsInsProRETScaSec
![Page 8: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/8.jpg)
RET Ser
![Page 9: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/9.jpg)
Parameter
2011-03-23 11:22
WBTS WBTS4.0 F / WBTS6.0 F
Abbreviated name
antId
antlId
antennaRoundTripDelay
antennaTotalLoss
cableLength
feederLoss
feederVoltage
frId
multiplexerType
multiplexerAmount
multiplexerLoss
multiplexerTotalDelay
mrcProdCode
phsFilterTotalDelay
velocityFactor
assocMaxRetrans
autoConfBlocked
btsName
btsConfiguration
![Page 10: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/10.jpg)
btsId
btsscId
cabinetType
cancelDelay
comment
commissioningRequired
descr
descr
ext2M048ClkInUse
extCtrlList
extAlList
gpsInUse
hsdpa16QAMSupport
hsdpaBbResAllocation
hsdpaFairPacketSched
qosSchedList
ccPolicy
happyBitUphThreshold
happyBitPingFiltUse
autoConHWId
inUse
inUse
initState
![Page 11: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/11.jpg)
intShutdownInUse
iubClkInUse
id
id
mainsPowerAlarmId
maxIubDelayThreshold
midIubDelayThreshold
minIubDelayThreshold
mod
module
module
moduleList
modLocation
name
numOfLines
passUnitList
pathMaxRetrans
polarity
prodCode
prodCode
id
rncType
resetToTestDedicated
![Page 12: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/12.jpg)
weight
serNum
severity
sharedHsdpaSheduler
autoConSiteId
startDelay
timeZone
unitList
unitName
unitNumber
variant
version
allowedCarrierList
antlIdList
cellRange
defaultCarrier
expirationTime
filterCenterTx
intShutdownTimeout
lCelId
hspaMapping
maxCarrierPower
rachCapacity
![Page 13: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/13.jpg)
shutdownStepAmount
shutdownWindow
accessBbCapacity
lCellGId
cellGroupName
dedicatedBbCapacity
hsupaBbDecodCapacity
hsupaBbMinimumUsers
hsupaBbSharingInUse
lCelIdList
releaseId3Gpp
aisgProtocol
active
antBandList
antBeamwidth
antBearing
antlId
antModel
antOperFreqBand
antOperGain
antSerial
baseStationID
connection
![Page 14: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/14.jpg)
downlinkDelay
alarmThresholdLevel
gainResolution
installDate
installerID
lnaNumber
mhaAlarmDetection
mhaGain
mhaId
mhaType
maxGain
minGain
prodCode
scannedAntennaInterface
sectorID
serNum
substance
tmaSubunitRxFreqBandMax
tmaSubunitRxFreqBandMin
tmaSubunitTxFreqBandMax
tmaSubunitTxFreqBandMin
tmaSubunitType
uplinkDelay
![Page 15: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/15.jpg)
wmhConnector
releaseId3Gpp
active
antOperFreqBand
antBandList
antBeamwidth
antBearing
antHeight
antlIdList
antLocation
antModel
antOperGain
antSerial
antTechnology
antType
baseStationID
connection
installDate
installerID
prodCode
retId
scannedAntennaInterface
sectorID
![Page 16: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/16.jpg)
serNum
![Page 17: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/17.jpg)
3GPP name
![Page 18: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/18.jpg)
Beamwidth in each operating band in band order
Antenna Bearing
Antenna model number
Antenna operating band(s)
Gain in each operating band in band order
Antenna serial number
Base Station ID
![Page 19: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/19.jpg)
Installation Date
Installer's ID
Sector ID
TMA Subunit receive frequency band
TMA Subunit receive frequency band
TMA Subunit transmit frequency band
TMA Subunit transmit frequency band
TMA Subunit type
![Page 20: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/20.jpg)
Antenna operating band(s)
Beamwidth in each operating band in band order
Antenna Bearing
Antenna model number
Gain in each operating band in band order
Antenna serial number
Base Station ID
Installation Date
Installer's ID
Sector ID
![Page 21: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/21.jpg)
Parameter group
![Page 22: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/22.jpg)
Category
Operation and Maintenance
![Page 23: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/23.jpg)
Operation and Maintenance
![Page 24: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/24.jpg)
Multiplicity:
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
![Page 25: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/25.jpg)
1
1
1
1
1
1
1
1
1
6
20
1
1
1
1
16
1
1
1
1
1
1
1
![Page 26: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/26.jpg)
1
1
1
1
1
1
1
1
1
1
1
5
1
1
1
100
1
1
1
1
1
1
1
![Page 27: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/27.jpg)
1
1
1
1
1
1
1
200
1
1
1
1
4
3
1
1
1
1
1
1
1
1
1
![Page 28: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/28.jpg)
1
1
1
1
1
1
1
1
1
6
1
1
1
4
1
1
1
1
1
1
1
1
1
![Page 29: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/29.jpg)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
![Page 30: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/30.jpg)
1
1
1
1
4
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
![Page 31: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/31.jpg)
1
![Page 32: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/32.jpg)
Description
Identifies the specific antenna port in Flexi Radio Module for antenna line.
Identifies the specific antenna line.
This parameter contains the total loss calculated from the feederLoss and passive units.
Defines the feeder loss of the antenna cable.
Identifies the specific Flexi Radio module for antenna line.
Defines a multiplexer type.
Defines how many diplexers connected as a series there can be in the antenna line.
Defines the diplexer loss.
Defines the product code of the unit in question.
Defines association maximum retransmissions (1-15 attempts, default 5).
This parameter indicates if auto configuration is allowed or blocked in auto configuration case.
This parameter can be used for identification of the WCDMA BTS (Node B).
A free text field for defining the used BTS configuration. For example: 1+1+1 20 W.
The delay of the all passive units of antenna line can be entered into this parameter, which is then used as the RTT value instead of calculating and defining value for each related parameter (ANTL: cableLength, multiplexerAmounth, multiplexerType, phsFilterTotalDelay, velocityFactor; MHA: active, downlinkDelay, mhaType, UplinkDelay). If related
Defines the antenna RF cable length in meters. This parameter is used by BTS Site Manager to calculate antenna round trip delay. The delay is 4.5 ns/m. The value for this parameter must be left away if the RTT value has already been entered in the antennaRoundTripDelay parameter. The antennaRoundTripDelay value is then used instead of
Defines the voltage level supplied to the antenna line. The values entered for this parameter depend on the MHA type. Non-AISG NSN MHAs: WMHA, WMHB: 12 WMHC: BTS1 Automatic value (Manual voltage override is allowed: possible values [0 V / +12 V/ +24V/ +28 V (+24 /+28 only for Main branch, value depends on the radio module type)]),
Defines the diplexer total delay both in up- and downlink direction. This parameter is used in BTS Manager to calculate diplexer signal propagation delay.
Total delay due to filter use. Filter's total delay is summed automatically to antennaRoundTripDelay when BTS Site Manager is used - otherwice summing needs to be done manuallly.
The Velocity factor is used to calculate RTT more exactly. The velocity factor can be obtained from the specifications of the used cable.
![Page 33: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/33.jpg)
Defines the BTS in question.
Defines specific Base Station site.
Defines the cabinet type. The allowed value is: FlexiBTS: 17.
Sets the cancellation delay for the fault.
Free text about the passive unit in question.
This parameter indicates if BTS requires configuration in auto configuration case.
Defines the external fault description.
Defines the external fault description.
Defines the usage of the external 2.048MHz synchronisation reference.
The list defines the external fault input signals.
Defines the usage of the GPS.
This parameter enables HSDPA 16QAM feature (RAN764).
HSDPA Quality of Service scheduling for SPI classes
System Module Core Assembly serial number : always present in FSM HW.
Defines if the external control line is in use or not in use.
Defines if the EAC line is in use or not in use.
The list defines the external fault output signals.
Defines how HSDPA users are allocated. The options are Full, BTS and Cell. If the selected option is BTS, it is possible to set 1 - 3 HSDPA cells, each of them situated in the same FSP. The total amount of the HSDPA users cannot exceed 16. The HSDPA capacity requirement is 32 channel elements from FSP. If the selected option is Cell, it This parameter enables the high-speed downlink packet access (HSDPA) Proportional Fair Resource Packet scheduler feature.
This parameter is used to select how the HSDPA Congestion Control (when enabled) treats different traffic classes in case of Iub overload. 0: This setting is intended for Background and Interactive NRT traffic classes. In case of Iub overload, congestion control is allowed to reduce the bit rate on Iub frame protocol level down to 0 credits, if needed. Parameter defines threshold value for UE Power Headroom (UPH) values in Happy bit ratio measurement. Happy bits that are associated to UPH values that are below the defined threshold, are not taken into account in Happy bit ratio measurement. The target for filtering is to filter out power limited situation from Happy bit ratio measurement as they Parameter is used to to define filtering for Happy bit ratio measurement. If filtering is active, then Happy bit ratio counter is not updated based on Happy bit preceding DTX frame/subframe. The target for filtering is to filter out small data bursts (such as ping) from Happy bit ratio measurement as they do not give reliable information of UE allocation.
Defines the initial state of the external control line after a reset of the BTS. The options are "On" and "Off". If the initial state is "On", current is going through.
![Page 34: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/34.jpg)
Defines the usage of the Iub synchronization reference.
Defines the module where EAC inputs are commissioned. Allowed modules are FSM1, FR1, FR2 and FR3
Defines the module where EAC outputs are commissioned. Allowed modules are FSM1, FR1, FR2 and FR3.
The list defines the module and its location e.g. place or address.
Defines the name of the passive unit in question.
Defines the number of external fault lines reserved by Mains break. The allowed values are 0,1 and 3.
The list defines commissioned passive units.
Defines path maximum retransmissions (1-15 attempts, default 5).
Defines the product code of the passive unit in question.
Defines the type of the RNC. If a NSN RNC is in use, there is no need to fill in any other RNC parameters.
This parameter indicates if BTS should automatically go to "Test Dedicated" state in start-up.
Defines the usage of the Intelligent shutdown feature. If intelligent shutdown has been selected in use (intShutdownInUse gets value true) then intelligent shutdown timeout (intShutdownTimeout) is mandatory for local cells (LCEL).
Defines the external fault lines. module, inUse, description, polarity and severity must be defined for input signals. There are 14 input signals in FlexiBTS system module. Lines 13 and 14 are reserved for the Flexi Power Module and cannot be assigned to other use. Values 1-14 are allowed. In WN5.0 and onwards input signals can be defined also Defines the external fault lines.
module, inUse, description and initialState must be defined for Control Signals. There are 6 output signals in FlexiBTS Defines the starting external fault line for the mains power fault when Intelligent shutdown is in use. Default values: Flexi Power Module: 13 NSN BBU: 1 Other BBU: a value between 1-12 can be chosen.
The maximum delay threshold after the system is interpreted to be in very severe congestion and propability to reduce credits is 100%. Threshold defines the deviation of arrival interval from the TTI given to Iub. Note: Thmin < Thmid < Thmax.The middle delay threshold after the system is interpreted to be in more severe congestion and MECN procedure is more aggressive. Threshold defines the deviation of arrival interval from the TTI given to Iub. Note: Thmin < Thmid < Thmax.Defines the minimum delay threshold after the MECN procedure activates. Threshold defines the deviation of arrival interval from the TTI given to Iub. Note: Thmin < Thmid < Thmax.
Defines a one of the following Flexi modules: Module="FSM1" | Module ="FSM2" | Module ="FR1" | Module ="FR2" | Module ="FR3" Location information can be defined to these modules.
Defines the location of Flexi module in free text with maximum 50 characters or has the value -1 (Not defined). The value -1 (Not defined) is not used at the commissioning file. Location can be e.g. place or address of the module.
Defines the used polarity of the external fault line: normally open or normally closed. Normally_open: when the connector is open, there is no alarm. Normally_closed: when the connector is closed, there is a fault.
Defines the product code of the module (radio module or system module). Parameter is used in offline mode commissioning in BTS Site Manager and in prevalidation in NetAct.
HSDPA Quality of Service Scheduling Priority Indicator (SPI) class identifier (0-15). This is standard defined identification of a priority class with zero being the lowest priority and 15 the highest.
![Page 35: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/35.jpg)
Defines the serial number of the passive unit in question.
Defines the seriousness of the external fault condition in question. Minor = 1 Major = 2 Critical = 3.
Site ID inserted by operator during autoconnection.
Sets the activation delay for the fault.
Defines the version of the passive unit in question.
This parameter sets the SIB7 expiration timer for the UE. The allowed values are 1,2,4,8,16,32,64,128, and 256.
Defines a scheduling weight for priority queues with specific SPI value. When there are no services with Guaranteed Bit Rate (GBR) in a cell, the weights are used to define the proportion in which the queues in a cell are scheduled in proportion to each other (the proportion is roughly the weight of queue divided by the sum of the weights of all
This parameter enables simultaneous HSDPA transmission to (max) three HSDPA-capable cells by using a single UltraSite WSPC card or one submodule in FlexiBTS.
Defines the used Time Zone.
The format is predefined, for example for Helsinki "(GMT+2) Europe/Helsinki".The list defines the unit information for offline mode commissioning in BTS Site Manager and for prevalidation in NetAct. unitList must contain radio modules and system modules from BTS site HW configuration. Defines the unit name of the module (radio module or system module) in question. unitName is FR for radio modules and FSM for system modules. Parameter is used in offline mode commissioning in BTS Site Manager and in prevalidation in NetActDefines the number of the module (radio module or system module) in the BTS. Radio module are numbered according to master system module's RF interfaces. Radio module connected to RF interface #1 gets unitNumber 1, Defines the name of the module (radio module or system module) in the BTS. Example: variant for FRGF is GF. Example: variant for FSMD is D.
Based on the hardware in the BTS, the BTS Site Manager checks which carrier values are allowed for BTS testing in each cell.
Defines the antenna line ID assigned to the local cell. Sector Configuration Type F (Single Antenna Receiving) is using only one antId per radio module. Sector Configuration Type A, B and C are using two antIds per radio module.Type C uses antennas from two radio modules,1 per radio module. The radius of one cell. The maximum range of the cell, i.e. the maximum distance from the cell site where a MS can have a radio connection to the cell including soft handover situations. The value is given in meters for non-NSN RNCs.
This parameter defines the default carrier used in tests for local cells. The UARFCN values used are operator-specific and defined by the 3GPP. For example, for the 2100 MHz frequency, the allowed values are 10562-10838.
This parameter defines absolute Tx frequency in kHz for overriding normal Filter center frequency tuning.
Parameter can be used to override normal filter tuning to minimize noise to neighbouring frequency band. If parameter Defines the backup time after which the cell starts to shut down itself. This parameter is used only when battery backup is used. The time is given in seconds. 0 is immediate and 599940 is infinite. Note that BTS Site Manager UI values are in minutes (0...9999).The Local cell resource is an object, which consists of the HW required by one cell for transmission and receiving. Local cell resource identifier is used to address one particular local cell resource at the BTS. The lCelId is unique within a BTS. With the Configuration Data message the local cell resource can be associated to the cell identifier (C-With the Mapping HSPA cell to HW parameter, the user can map HSPA local cells to baseband HW resources (to different system modules). Parameter can have values FSM1, FSM2 AND None. By default None value is used.
The maximum TX carrier power for the local cell in dBm. The value is shown in watts in the BTS Site Manager. The allowed values are 39.0, 40.0, 41.8, 43.0, 44.8, 46.0 and 47.8.
RACH Capacity defines the HW capacity reserved for a RACH transport channel in the BTS. RACH Capacity is given as a number of decoded RACH messages in a 10 ms or 20 ms radio frame. The options are 1,2,3 and 4.
![Page 36: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/36.jpg)
Cell group identification.
User definable name for Cell Group. 1-20 characters.
Defines Minimum HSUPA decoding capacity per LCG in Mbit/s.
Defines minimum amount of users allocate to baseband in HSUPA.
This parameter defines HSUPA BB sharing usage.
Defines the list of local cells belonging to the local cell groups.
A list containing: operating frequency band, beamwidth and the operation gain
Antenna Bearing
Identifies the specific antenna line assigned to the MHA.
Antenna model number
Antenna serial number
Base Station ID
Defines the connection type for MHA/LNA. Expected values: Internal | Shared | External
A 3GPP Iub parameter for the gradual shutdown procedure. Indicates in how many steps the transmission power for CPICH, BCH and all other common physical and transport channels is shut down within the shutdown window.
A 3GPP Iub parameter for the shutdown procedure. Indicates how long the actual shutdown procedure for CPICH, BCH and all other common physical and transport channels lasts. The time is given in seconds. If the value is 0, the gradual shutdown procedure is not used at all.Defines the LCGs access to Baseband Capacity from 0 to 100%, when BB Parameter Supports.Flexible.Bb.Configuration is TRUE for all Modules. If at least one of the used modules has BPF parameter Supports.Flexible.Bb.Configuration equal to FALSE, then the LCG access to BB capacity is fixed according to BB Bus
Defines the quaranteed CE capacity for each LCG in MORAN case (Optional feature).
BTS Manager shall allow dedicated Baseband options in percentages from 0 to 100%. The sum of all dedicated
3GPP protocol version
Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature AISG protocol version
Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature Defines MHA as AISG MHA or Non-AISG MHA. Selectable values is 0 (false)= Non-AISG MHA and 1 (true )= AISG MHA .
The antenna beamwidth for the band. Some RET types may automatically update the beamwidth information based on the configuration data downloaded into the RET device. Some devices may also restrict ovewriting the field.
Antenna operating band(s): 1 - 3GPP band I: 2100 MHz2 - 3GPP band II: 1900 MHzThe antenna gain for the band. Some RET types may automatically update the gain information based on the configuration data downloaded into the RET device. Some devices may also restrict ovewriting the field.
![Page 37: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/37.jpg)
Installation Date
Installer's ID
Parameter for MHA telling LNA number inside one MHA. For Non AISG MHAs is used -1 (not defined).
Defines the gain of the mast-head amplifier.
Defines the specific mast-head amplifier unit. The value is given as consecutive numbers starting from 1.
Defines the product code of the unit in question.
Sector ID
Defines the serial number of the unit in question.
Defines the "other" type of MHA delay in the downlink direction. If the BTS Site Manager is used to calculate RTT delay, this value must be specified for an "Other" type MHA.
Defines a configurable fault threshold level for the mast-head amplifier, used if the MHA fault detection parameter has the value 1 (in use). Default value is depending on Flexi Filter (FF).
Gain resolution given as the gain resolution figure expressed in dB.
Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature
Defines if fault detection is used or not. The options are 0 (false) and 1 (true). Default values for Non-AISG MHAs and AISG MHAs in passive mode: 1 Default values for AISG and third party MHAs:0 Note: Configurable MHA faults are allowed only for passive MHAs
Defines the type of the MHA. The supported MHA types are: WMHA, WMHB, WMHC, WMHD, MDTA, MDPA, MDGA, MDDA, FLJA, DTMAFV1, DTMAFV3, DTMAFV4, DTMARETFV1, DTMARETFV2, DTMARETFV3, DTMARETFV4, SDTMARETFV1, SDTMARETFV2, SDTMARETFV3, TMAFV1, TMAFV3, TMAFV4, TMARETFV1 and other.Maximum supported gain given as gain figure expressed in dB.
Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature Minimum supported gain given as gain figure expressed in dB.
Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature
Defines which antenna interface is scanned. Expected value: FRx-ANTx and empty string where FRx: 1...3 and ANTx: 1...6 It is depending on radio module type which antennas are capable for scanning / AISG device detection.
Substance version number
Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature TMA Subunit receive frequency band
Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature TMA Subunit receive frequency band
Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature TMA Subunit transmit frequency band
Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature TMA Subunit transmit frequency band
Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature TMA Subunit type
Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature Defines the MHA delay in the uplink direction for an "Other" type MHA. If the BTS Site Manager is used to calculate antenna round trip time delay, this value must be specified.
![Page 38: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/38.jpg)
A list containing: operating frequency band, beamwidth and the operation gain.
Antenna bearing
Antenna height
Identifies the specific antenna line(s) assigned to the RET.
Antenna location
Antenna model number
Antenna serial number
Antenna type according to the user scheme
Base Station ID
Defines the connection type for TILT. Expected values: Internal | Shared | External.
Installation date
Installer's ID
Defines the product code of the unit in question. Mandatory for 3GPP RET.
Defines the specific RET (Remote Electrical Tilting) wich is vertical tilting for antenna.
Sector ID
Defines the MHA connector in question of WMHC and TMARET MHA types. The options are BTS1 (Pass-through) and BTS2 (Power) for WMHC, NODEB0 and NODEB1 for TMARET MHA types. If other than WMHC or TMARET MHA types are used then wmhConnector parameter value is None3GPP protocol version
Note:In this release parameter uploading is possible only by NetAct.Defines RET as AISG RET or Non-AISG RET.
Selectable values is 0 (false)= Siemens AISG1.1, Antenna operating band(s): 1 - 3GPP band I: 2100 MHz2 - 3GPP band II: 1900 MHz
The antenna beamwidth for the band. Some RET types may automatically update the beamwidth information based on the configuration data downloaded into the RET device. Some devices may also restrict ovewriting the field.
The antenna gain for the band. Some RET types may automatically update the gain information based on the configuration data downloaded into the RET device. Some devices may also restrict ovewriting the field.
Antenna technology:0: voice; 1: data;
Defines which antenna interface is scanned. Expected value: FRx-ANTx and empty string where RFx: 1...3 and ANTx: 1...6 It is depending on radio module type which antennas are capable for scanning / AISG device detection.
![Page 39: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/39.jpg)
Defines the serial number of the unit in question. Mandatory for 3GPP RET.
![Page 40: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/40.jpg)
Range:
0 (ANT1), 1 (ANT2), 2 (ANT3), 3 (ANT4), 4 (ANT5), 5 (ANT6)
1..18
4.5..45077.5
-214748364..0
1..9999
-99.9..0
-1 (Automatic), 0 (0), 1 (12), 2 (24), 3 (28)
0 (FR1), 1 (FR2), 2 (FR3)
-1 (None), 0 (Diplexer), 1 (Triplexer)
1..3
-99..0
0..1000
1..80
0..1000
0.01..0.99
1..15
0 (false), 1 (true)
1..80
1..64
![Page 41: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/41.jpg)
1..65534
1..1
17..17
0..86400
1..60
0 (false), 1 (true)
1..64
1..64
0 (false), 1 (true)
-
-
0 (false), 1 (true)
0 (false), 1 (true)
0 (BTS), 1 (Cell), 2 (Full)
0 (false), 1 (true)
-
0..2
1..31
0..1
1..11
0 (false), 1 (true)
0 (false), 1 (true)
0 (On), 1 (Off)
![Page 42: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/42.jpg)
0 (false), 1 (true)
0 (false), 1 (true)
1..20
1..6
1..13
0..5000
0..5000
0..5000
0 (FSM1), 1 (FSM2), 2 (FR1), 3 (FR2), 4 (FR3)
0 (FSM1), 1 (FR1), 2 (FR2), 3 (FR3)
0 (FSM1), 1 (FR1), 2 (FR2), 3 (FR3)
-
0..50
1..60
0..3
-
1..15
0 (Normally_open), 1 (Normally_closed)
1..20
0..60
0..15
0 (NSN), 1 (Other)
0 (false), 1 (true)
![Page 43: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/43.jpg)
0..100
0..60
1 (Minor), 2 (Major), 3 (Critical)
0 (false), 1 (true)
0..50
0..86400
-
1..80
1..99
0..60
1..20
0..16383
1..18
100..180000
0..16383
0 (1), 1 (2), 2 (4), 3 (8), 4 (16), 5 (32), 6 (64), 7 (128), 8 (256)
0..3000000
0..9999
0..268435455
-1 (None), 0 (FSM1), 1 (FSM2)
0 (39.0), 1 (40.0), 2 (41.8), 3 (43.0), 4 (44.8), 5 (46.0), 6 (47.8)
1..4
0 ((GMT-11) Etc/GMT+11), 1 ((GMT-11) MIT), 2 ((GMT-11) Pacific/Apia), 3 ((GMT-11) Pacific/Midway), 4 ((GMT-11) Pacific/Niue), 5 ((GMT-11) Pacific/Pago_Pago), 6 ((GMT-11) Pacific/Samoa), 7 ((GMT-11) US/Samoa), 8 ((GMT-10) America/Adak), 9 ((GMT-10) America/Atka), 10 ((GMT-10) Etc/GMT+10), 11 ((GMT-10) HST), 12 ((GMT-10)
![Page 44: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/44.jpg)
1..16
0 (0), 1 (5), 2 (10), 3 (15), 4 (20), 5 (25), 6 (30), 7 (35), 8 (40), 9 (45)
0..100
1..4
1..20
0..100
0 (0 Mbit/s), 1 (less than 1.4 Mbit/s), 2 (1.4 Mbit/s), 3 (2.8 Mbit/s), 4 (4.2 Mbit/s), 5 (5.6 Mbit/s)
0..24
0 (false), 1 (true)
0..268435455
0..255
2..255
0 (false), 1 (true)
-
0..360
0..359.9
1..18
0..15
0..25.5
0..17
0..32
0 (Internal), 1 (Shared), 2 (External)
1 (Band I), 2 (Band II), 3 (Band III), 4 (Band IV), 5 (Band V), 6 (Band VI), 7 (Band VII), 8 (Band VIII), 9 (Band IX), 10 (Band X), 11 (Band XI), 12 (Band XII), 13 (Band XIII), 14 (Band XIV)
![Page 45: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/45.jpg)
0..1000
120..775
0..99
0..6
0..5
-1 (Not Defined), 0 (LNA1), 1 (LNA2)
0 (false), 1 (true)
0..99
1..255
0..99
0..99
1..80
0..32
1..80
2..255
0..6553500
0..6553500
0..6553500
0..6553500
0..1000
0 (WMHA), 1 (WMHB), 2 (WMHC), 3 (WMHD), 4 (MDTA), 5 (MDPA), 6 (MDGA), 7 (MDDA), 8 (FLJA), 9 (DTMAFV1), 10 (DTMAFV3), 11 (DTMAFV4), 12 (DTMARETFV1), 13 (DTMARETFV2), 14 (DTMARETFV3), 15 (DTMARETFV4), 16 (SDTMARETFV1), 17 (SDTMARETFV2), 18 (SDTMARETFV3), 19 (TMAFV1), 20 (TMAFV3), 21 (TMAFV4), 22
-1 (NONE), 0 (FR1-ANT1), 1 (FR1-ANT3), 2 (FR1-ANT5), 3 (FR2-ANT1), 4 (FR2-ANT3), 5 (FR2-ANT5), 6 (FR3-ANT1), 7 (FR3-ANT3), 8 (FR3-ANT5)
Bit 0: Bypass, Bit 1: VSWR, Bit 2: spare (Always 0), Bit 3: spare (Always 0), Bit 4: spare (Always 0), Bit 5: spare (Always 0), Bit 6: spare (Always 0), Bit 7: spare (Always 0)
![Page 46: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/46.jpg)
-1 (None), 0 (BTS1), 1 (BTS2), 2 (NODEB0), 3 (NODEB1)
0..255
0 (false), 1 (true)
-
0..360
0..359.9
0..999
1..18
0..31
0..15
0..25.5
0..17
0 (voice), 1 (data), 2 (voice/data)
1 (Type 1), 2 (Type 2), 3 (Type 3), 4 (Type 4), 5 (Type 5), 6 (Type 6), 7 (Type 7), 8 (Type 8), 9 (Type 9)
0..32
0 (Internal), 1 (Shared), 2 (External)
0..6
0..5
1..80
1..255
0..32
1 (Band I), 2 (Band II), 3 (Band III), 4 (Band IV), 5 (Band V), 6 (Band VI), 7 (Band VII), 8 (Band VIII), 9 (Band IX), 10 (Band X), 11 (Band XI), 12 (Band XII), 13 (Band XIII), 14 (Band XIV)
-1 (NONE), 0 (FR1-ANT1), 1 (FR1-ANT3), 2 (FR1-ANT5), 3 (FR2-ANT1), 4 (FR2-ANT3), 5 (FR2-ANT5), 6 (FR3-ANT1), 7 (FR3-ANT3), 8 (FR3-ANT5)
![Page 47: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/47.jpg)
1..80
![Page 48: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/48.jpg)
Step:
-
1
0.1
0.1
1
0.1
-
-
-
1
0.1
1
-
1
0.01
1
-
-
-
![Page 49: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/49.jpg)
1
1
1
1
-
-
-
-
-
-
-
-
-
-
-
-
1
1
1
-
-
-
-
![Page 50: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/50.jpg)
-
-
1
1
1
10
10
10
-
-
-
-
-
-
1
-
1
-
-
-
1
-
-
![Page 51: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/51.jpg)
1
-
-
-
-
1
-
-
-
1
-
-
1
1
100
1
-
1
1
1
-
-
1
![Page 52: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/52.jpg)
1
-
1
1
-
1
-
1
-
1
1
1
-
-
1
0.1
1
-
-
0.1
-
-
-
![Page 53: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/53.jpg)
1
1
0.01
-
-
-
-
0.01
1
-
0.01
0.01
-
-
-
-
1
100
100
100
100
-
1
![Page 54: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/54.jpg)
-
1
-
-
-
1
0.1
1
1
1
-
0.1
-
-
-
-
-
-
-
-
1
-
-
![Page 55: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/55.jpg)
-
![Page 56: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/56.jpg)
Unit:
-
-
ns
dB
m
dB
-
-
-
pcs
dB
ns
characters
ns
-
-
-
characters
characters
![Page 57: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/57.jpg)
-
-
-
s
characters
-
characters
characters
-
-
-
-
-
-
-
-
-
-
-
characters
-
-
-
![Page 58: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/58.jpg)
-
-
-
-
-
ms
ms
ms
-
-
-
-
characters
characters
-
-
-
-
characters
characters
-
-
-
![Page 59: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/59.jpg)
-
characters
-
-
characters
s
-
-
characters
-
characters
characters
-
-
m
-
-
kHz
min
-
-
-
-
![Page 60: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/60.jpg)
-
-
%
-
characters
%
-
-
-
-
-
-
-
-
deg
deg
-
characters
-
dBi
characters
characters
-
![Page 61: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/61.jpg)
ns
mA
dB
characters
characters
-
-
dB
-
-
dB
dB
characters
-
characters
characters
-
kHz
kHz
kHz
kHz
-
ns
![Page 62: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/62.jpg)
-
-
-
-
-
deg
deg
meters
-
-
characters
dBi
characters
-
-
characters
-
characters
characters
characters
-
-
characters
![Page 63: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/63.jpg)
characters
![Page 64: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/64.jpg)
Formula for getting internal value
= UI_value
= UI_value * 10
= UI_value * 10
= UI_value
= UI_value * 10
= UI_value
= UI_value * 10
= UI_value
= UI_value
= UI_value * 100
= UI_value
![Page 65: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/65.jpg)
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
![Page 66: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/66.jpg)
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
![Page 67: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/67.jpg)
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value * 60
= UI_value
= UI_value
![Page 68: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/68.jpg)
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value * 10
= UI_value
= UI_value * 10
![Page 69: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/69.jpg)
= UI_value
= UI_value
= UI_value * 100
= UI_value * 100
= UI_value
= UI_value * 100
= UI_value * 100
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
![Page 70: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/70.jpg)
= UI_value
= UI_value
= UI_value * 10
= UI_value
= UI_value
= UI_value
= UI_value * 10
= UI_value
![Page 71: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/71.jpg)
Default value
-3
-3
1
-0.5
25
0
0.82
5
false
![Page 72: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/72.jpg)
1
17
0
false
false
true
0
true
10
1
false
false
1
![Page 73: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/73.jpg)
false
false
13
250
150
50
5
1
0
false
![Page 74: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/74.jpg)
true
0
20000
0
0
2
![Page 75: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/75.jpg)
10
3
0
0
0
0
false
![Page 76: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/76.jpg)
0
165
0
![Page 77: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/77.jpg)
0
![Page 78: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/78.jpg)
Default value notes
Auto configuration is not blocked.
![Page 79: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/79.jpg)
1 (filtering active)
![Page 80: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/80.jpg)
Start-up normally.
![Page 81: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/81.jpg)
Required on creation
Mandatory
Mandatory
Mandatory
Mandatory
Optional
Mandatory
Mandatory
Mandatory
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Value set by the system
Mandatory
Mandatory
![Page 82: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/82.jpg)
Mandatory
Mandatory
Mandatory
Optional
Optional
Value set by the system
Mandatory
Mandatory
Mandatory
Optional
Optional
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Optional
Optional
Value set by the system
Mandatory
Mandatory
Mandatory
![Page 83: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/83.jpg)
Mandatory
Mandatory
Mandatory
Mandatory
Optional
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Optional
Optional
Optional
Optional
Optional
Optional
Mandatory
Mandatory
Optional
Mandatory
Mandatory
Optional
![Page 84: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/84.jpg)
Mandatory
Optional
Mandatory
Mandatory
Value set by the system
Optional
Mandatory
Mandatory
Optional
Mandatory
Optional
Optional
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Optional
Optional
Mandatory
Mandatory
Mandatory
Mandatory
![Page 85: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/85.jpg)
Optional
Optional
Mandatory
Mandatory
Optional
Optional
Mandatory
Mandatory
Mandatory
Mandatory
Value set by the system
Value set by the system
Mandatory
Optional
Mandatory
Optional
Mandatory
Optional
Mandatory
Mandatory
Optional
Optional
Mandatory
![Page 86: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/86.jpg)
Mandatory
Mandatory
Value set by the system
Optional
Optional
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Value set by the system
Value set by the system
Mandatory
Mandatory
Optional
Mandatory
Value set by the system
Value set by the system
Value set by the system
Value set by the system
Value set by the system
Value set by the system
Mandatory
![Page 87: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/87.jpg)
Mandatory
Value set by the system
Mandatory
Mandatory
Optional
Mandatory
Optional
Optional
Mandatory
Optional
Optional
Mandatory
Optional
Optional
Optional
Optional
Mandatory
Optional
Optional
Optional
Mandatory
Mandatory
Optional
![Page 88: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/88.jpg)
Optional
![Page 89: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/89.jpg)
Special value
![Page 90: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/90.jpg)
0
0
![Page 91: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/91.jpg)
0
0
![Page 92: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/92.jpg)
Related functions
![Page 93: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/93.jpg)
System information
![Page 94: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/94.jpg)
Modification
cellShutdown
unmodifiable
![Page 95: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/95.jpg)
onLine
onLine
unmodifiable
onLine
onLine
onLine
onLine
onLine
onLine
cellShutdown
unmodifiable
onLine
onLine
onLine
![Page 96: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/96.jpg)
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
![Page 97: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/97.jpg)
onLine
onLine
onLine
unmodifiable
onLine
onLine
onLine
onLine
onLine
![Page 98: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/98.jpg)
unmodifiable
unmodifiable
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
![Page 99: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/99.jpg)
unmodifiable
onLine
onLine
unmodifiable
unmodifiable
onLine
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
![Page 100: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/100.jpg)
unmodifiable
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
![Page 101: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/101.jpg)
Modified
![Page 102: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/102.jpg)
Modification via BTS commissioning.
Pronto 45125ESPE04 Change range from 0...31 to 1...31.
![Page 103: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/103.jpg)
Modification via BTS commissioning.
![Page 104: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/104.jpg)
Related parameters
- cableLength of ANTL - Cable lenght and velocity factor is used for RTT delay calculation for feeder cable. - velocityFactor of ANTL - Cable lenght and velocity factor is used for RTT delay calculation for feeder cable. - multiplexerAmount of ANTL - This is multiplier for RTT delays for multiplexerTotalDelay for other typ and Nokia type
- antennaRoundTripDelay of ANTL - Cable lenght and velocity factor is used for RTT delay calculation for feeder cable. If these parameters is defined then there must use same values when RTT total delay is calculated for antennaRoundTripDelay parameter.
- antennaRoundTripDelay of ANTL - When multiplexer type is Diplexer/Triplexer then default RTT delay needs to be summent to the antennaRoundTripDelay.
- antennaRoundTripDelay of ANTL - This is multiplier for RTT delays for multiplexerTotalDelay for other typ and Nokia type of multiplexer default RTT delay.
- antennaRoundTripDelay of ANTL - If multiplexer type is other than "none" multiplexerTotalDelay must be defined and also calculated to the antennaRoundTripDelay.
- antennaRoundTripDelay of ANTL - When phsFilterTotalDelay is defined it needs to be summend to the antennaRoundTripDelay.
- antennaRoundTripDelay of ANTL - Cable lenght and velocity factor is used for RTT delay calculation for feeder cable. If these parameters is defined then there must use same values when RTT total delay is calculated for antennaRoundTripDelay parameter.
![Page 105: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/105.jpg)
- id of BTSSC - If SPI class id is 0...12 then ccPolicy default value is 0 and if SPI class id is 13...15 then ccPolicy default value is 1.
![Page 106: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/106.jpg)
- intShutdownTimeout of LCEL - intShutdownTimeout is mandatory when intShutdownInUse gets value true.
![Page 107: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/107.jpg)
- antlId of ANTL - Identifies the specific antenna line and it's ID assigned to the local cell.
- intShutdownInUse of BTSSC - If intelligentShutdownInUse parameter value is false then this parameter is optional.
- id of BTSSC - Relation between SPI class id and scheduling weight default value is following: id => weight 0 => 1
![Page 108: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/108.jpg)
- antlId of ANTL - Identifies the specific antenna line id assigned to the MHA.
- mhaType of MHA - If Active parameter value is false there is relation to MHA type and delay values used in RTT (antennaRoundTripDelay).
![Page 109: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/109.jpg)
- antennaRoundTripDelay of ANTL - Delays from passive mode MHA is added to antennaRoundTripDelay value by formula defined in antennaRoundTripDelay parameter description. - mhaType of MHA - When passive mode "other" type MHA is used, Downlink delay needs to be defined other cases
- antennaRoundTripDelay of ANTL - RTT delay default values for Nokia MHAs is defined in antennaTripDelay parammeter description. Only "other" - type of MHAs delay value needs to be defined.- active of MHA - Only passsive mode MHAs delay values needs to be defined. Delay from active mode Nokia MHA is
- antennaRoundTripDelay of ANTL - Delays from passive mode MHA is added to antennaRoundTripDelay value by formula defined in antennaRoundTripDelay parameter description.- mhaType of MHA - When passive mode "other" type MHA is used, Uplink delay needs to be defined other cases
![Page 110: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/110.jpg)
- antlId of ANTL - Identifies the specific antenna line(s)id assigned to the RET.
![Page 111: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/111.jpg)
Parameter relationships
![Page 112: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/112.jpg)
If SPI class id is 0...12 then ccPolicy default value is 0 and if SPI class id is 13...15 then ccPolicy default value is 1.
![Page 113: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/113.jpg)
intShutdownTimeout is mandatory when intShutdownInUse gets value true.
![Page 114: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/114.jpg)
Identifies the specific antenna line and it's ID assigned to the local cell.
If intelligentShutdownInUse parameter value is false then this parameter is optional.
Relation between SPI class id and scheduling weight default value is following: id => weight 0 => 1
![Page 115: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/115.jpg)
Identifies the specific antenna line id assigned to the MHA.
![Page 116: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/116.jpg)
Identifies the specific antenna line(s)id assigned to the RET.
![Page 117: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/117.jpg)
Related features
RAN1299 BTS Auto Configuration (optional)
![Page 118: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/118.jpg)
RAN1299 BTS Auto Configuration (optional)
RAN1093 HSDPA 16QAM SW Licence Support (optional) RAN764 HSDPA 16QAM Support (optional)
RAN849 HSDPA Proportional Fair Resource Packet Scheduler (optional)
RAN1298 BTS Auto Connection (optional) RAN1299 BTS Auto Configuration (optional)
![Page 119: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/119.jpg)
RAN1299 BTS Auto Configuration (optional)
![Page 120: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/120.jpg)
RAN1034 Shared HSDPA Scheduler for Baseband Efficiency (optional)
RAN1298 BTS Auto Connection (optional) RAN1299 BTS Auto Configuration (optional)
RAN1671 Enhanced UltraSite Base Band (EUBB) (optional)
![Page 121: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/121.jpg)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
![Page 122: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/122.jpg)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
![Page 123: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/123.jpg)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
RAN1852 RET Device Naming (standard)
![Page 124: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/124.jpg)
Interfaces
- EM <-> WBTS
- EM <-> WBTS
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
- WBTS -> RAC- RAC -> RACApp
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
![Page 125: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/125.jpg)
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- RAC <-> RACApp- WBTS <-> RAC- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- WBTS -> RAC- RAC -> RACApp
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- WBTS -> RAC- RAC -> RACApp
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
![Page 126: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/126.jpg)
- EM <-> WBTS
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS
![Page 127: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/127.jpg)
- EM <-> WBTS
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- WBTS -> RAC- RAC -> RACApp
- EM <-> WBTS- RAC <-> RACApp- WBTS <-> RAC- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
![Page 128: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/128.jpg)
- WBTS -> RAC
- WBTS -> RAC
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
![Page 129: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/129.jpg)
- WBTS -> RAC
- WBTS -> RAC
- WBTS -> RAC
- WBTS -> RAC
- WBTS -> RAC
- WBTS -> RAC
- WBTS -> RAC
- WBTS -> RAC
- WBTS -> RAC
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
![Page 130: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/130.jpg)
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
![Page 131: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/131.jpg)
- EM <-> WBTS- WBTS <-> RAC- RAC <-> RACApp
![Page 132: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/132.jpg)
References
- Undefined:1451
- Undefined:1451
- Undefined:1451
- Undefined:1451
- Undefined:1451
- Undefined:1451
- Undefined:1453
- Undefined:1451
- Undefined:1451
- Undefined:1451
- Undefined:1451
- Undefined:1451
- Undefined:1451
- Undefined:1451
- Undefined:1451
- Undefined:3155 (public)
- Undefined:1462
- Undefined:1439
- Undefined:1478- Undefined:1485
![Page 133: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/133.jpg)
- Undefined:1469
- Undefined:1470
- Undefined:1449
- Undefined:1458
- Undefined:1447
- Undefined:1462
- Undefined:1447
- Undefined:1447
- Undefined:1462
- Undefined:1468
- Undefined:1467
- Undefined:1467
- Undefined:1448
- Undefined:1447
- Undefined:1447
- Undefined:1475- Undefined:1484
- Undefined:1473- Undefined:1482
- Undefined:1474- Undefined:1482
- Undefined:1464- Undefined:1465
- Undefined:1464- Undefined:1465
- Undefined:1476- Undefined:1486
![Page 134: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/134.jpg)
- Undefined:1462
- Undefined:1447
- Undefined:1448
- Undefined:1449
- Undefined:1464
- Undefined:1464
- Undefined:1464
- Undefined:1462
- Undefined:1447
- Undefined:1448
- Undefined:1995
- Undefined:1458
- Undefined:1462
- Undefined:1458
- Undefined:3155 (public)
- Undefined:1447
- Undefined:1458
- Undefined:1446
- Undefined:1450- Undefined:1449
- Undefined:1456- Undefined:1434
- Undefined:1464- Undefined:1465
- Undefined:1477- Undefined:1483
![Page 135: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/135.jpg)
- Undefined:1458
- Undefined:1447
- Undefined:1436
- Undefined:1458
- Undefined:1444
- Undefined:1451
- Undefined:1446
- Undefined:1455
- Undefined:1446
- Undefined:1430
- Undefined:1461
- Undefined:1491
- Undefined:1459
- Undefined:1446
- Undefined:1464- Undefined:1465
- Undefined:1472- Undefined:1482
- Undefined:1476- Undefined:1486
- Undefined:1456- Undefined:1434
- Undefined:1456- Undefined:1434
- Undefined:1456- Undefined:1434
- Undefined:1456- Undefined:1434
- Undefined:1450- Undefined:1449
![Page 136: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/136.jpg)
- Undefined:1446
- Undefined:1446
- Undefined:3140
- Undefined:1457
- Undefined:1488
- Undefined:1431
- Undefined:1457
- Undefined:1457
- Undefined:1457
- Undefined:1457
- Undefined:1453
- Undefined:1451
- Undefined:1453
- Undefined:1492- Undefined:1417 (public)
- Undefined:1490- Undefined:1418 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
![Page 137: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/137.jpg)
- Undefined:1453
- Undefined:1453
- Undefined:1453
- Undefined:1453
- Undefined:1453
- Undefined:1453
- Undefined:1453
- Undefined:1453
- Undefined:1453
- Undefined:1453
- Undefined:1453
- Undefined:1493- Undefined:1418 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1493- Undefined:1418 (public)
- Undefined:1493- Undefined:1418 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1490- Undefined:1418 (public)
- Undefined:1493- Undefined:1418 (public)
- Undefined:1493- Undefined:1418 (public)
- Undefined:1493- Undefined:1418 (public)
- Undefined:1493- Undefined:1418 (public)
- Undefined:1493- Undefined:1418 (public)
![Page 138: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/138.jpg)
- Undefined:1453
- Undefined:1480
- Undefined:1494
- Undefined:1451
- Undefined:1494
- Undefined:1494
- Undefined:1494
- Undefined:1460
- Undefined:1460
- Undefined:1460
- Undefined:1460
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
- Undefined:1492- Undefined:1417 (public)
![Page 139: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/139.jpg)
- Undefined:1460
![Page 140: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/140.jpg)
Struct parameter
![Page 141: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/141.jpg)
extAlList
passUnitList
extCtrlList
extAlList
qosSchedList
extCtrlList
extAlList
extCtrlList
![Page 142: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/142.jpg)
extAlList
extCtrlList
moduleList
extAlList
extCtrlList
moduleList
passUnitList
extAlList
unitList
passUnitList
qosSchedList
![Page 143: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/143.jpg)
qosSchedList
passUnitList
extAlList
extAlList
unitList
unitList
unitList
passUnitList
![Page 144: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/144.jpg)
antBandList
antBandList
antBandList
![Page 145: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/145.jpg)
antBandList
antBandList
antBandList
![Page 146: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/146.jpg)
Reference InformationDocument Type Parameter
Date 2011-03-23 11:23
Compare scope WBTS WBTS4.0 F / WBTS6.0 F
Managed Object P
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
ANTENNA_HW
AnAntAntCabDipDipDipDipDipDipFeeFeePHSPHSSamSamTotTriVel
![Page 147: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/147.jpg)
CELL_GROUP
CELL_GROUP
CELL_GROUP
CELL_GROUP
CELL_GROUP
CELL_GROUP
CELL_GROUP
FILEMODE_UNIT
FILEMODE_UNIT
FILEMODE_UNIT
INPUT_EAC
INPUT_EAC
INPUT_EAC
INPUT_EAC
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
Cell HSUHSUHSULCRWSPWSPFileUniVarDesLinPolSevActAlaAntConDowLNAMHAMHAMHA
![Page 148: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/148.jpg)
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
MHA
OUTPUT_EAC
OUTPUT_EAC
OUTPUT_EAC
PASSIVE_UNIT
PASSIVE_UNIT
PASSIVE_UNIT
PASSIVE_UNIT
PASSIVE_UNIT
TILT
TILT
TILT
TILT
TILT
TILT
MHAMHAMHAMHAProScaSerUpliWMHDesIniLinComPasProSerVerAntConConManProSca
![Page 149: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/149.jpg)
TILT
TILT
WBTS
WBTS
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
SerTILWBTWCDASCAutAutBS CabCabComFR1FR2FR3FSMFSMFileFileFileFileHSDHSDInt
![Page 150: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/150.jpg)
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WBTS_HW
WCEL
WCEL_HW
WCEL_HW
WCEL_HW
WCEL_HW
WCEL_HW
WCEL_HW
WCEL_HW
WCEL_HW
WCEL_HW
WCEL_HW
WCEL_HW
WCEL_HW
WCEL_HW
MaiNumRNCTimWBTLocAlloCell Cell ConDefExpExpFR IntMaxRACShuShu
![Page 151: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/151.jpg)
Parameter
2011-03-23 11:23
WBTS WBTS4.0 F / WBTS6.0 F
Abbreviated name
AntennaId
AntennaRoundTripDelay
AntennaTotalLoss
CableLength
DiplexerAmount
DiplexerInUse
DiplexerType
DiplexerType
DiplexerLoss
DiplexerTotalDelay
FeederLoss
FeederVoltage
PHSFilterInUse
PHSTotalDelay
SBCInUse
SBCProductCode
PHSTotalDelay
TriplexerInUse
VelocityFactor
![Page 152: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/152.jpg)
CellGroupId
HSUPABBDecodingCapacity
HSUPABBMinimumUsers
HSUPABBSharingInUse
LcrId
WspId
WspId
FuName
UnitNumber
Variant
InputAlarmDescription
InputLineId
InputSignalPolarity
InputAlarmSeverity
Active
AlarmThresholdLevel
AntennaId
Connection
DownlinkDelay
LNANumber
MHAAlarmDetection
MhaGain
MhaAntennaId
![Page 153: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/153.jpg)
MhaAntennaId
MHAType
MHAType
MHAType
ProductCode
ScannedAntennaInterface
SerialNumber
UplinkDelay
WMHConnector
OutputAlarmDescription
InitialOutputAlarmState
OutputLineId
Comment
PuName
ProductCode
SerialNumber
PuVersion
AntennaId
ConfigFile
Connection
Manufacturer
ProductCode
ScannedAntennaInterface
![Page 154: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/154.jpg)
SerialNumber
TILTAntennaId
WBTSId
WBTSName
AscuIpAddress
AuthenticationServerIpAddress
AuthenticationServerName
BsConfigurationIdentifier
CabinetIdInLargeWBTS
CabinetType
CommissioningMode
Fr1ModuleLocation
Fr2ModuleLocation
Fr3ModuleLocation
Fsm1ModuleLocation
Fsm2ModuleLocation
FileAuthor
FileCreationDate
FileVersionIdentification
FileVersionIdentification
HSDPABBResourceAllocation
HSDPABBResourceAllocation
IntelligentShutdownInUse
![Page 155: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/155.jpg)
MainsPowerAlarmId
MainsPowerAlarmLines
RNCType
TimeZone
Version
LcrId
AllowedCarrier
CellRange
CellRange
Concept
DefaultCarrier
ExpirationTime
ExpirationTime
FrAntId
IntelligentShutdownTimeout
MaxCarrierPower
RACHCapacity
ShutdownStepAmount
ShutdownWindow
![Page 156: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/156.jpg)
3GPP name
![Page 157: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/157.jpg)
Parameter group
![Page 158: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/158.jpg)
Category
![Page 159: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/159.jpg)
Multiplicity:
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
![Page 160: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/160.jpg)
1
1
1
1
12
3
6
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
![Page 161: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/161.jpg)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
![Page 162: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/162.jpg)
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
![Page 163: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/163.jpg)
1
1
1
1
1
1
4
1
1
1
1
1
1
12
1
1
1
1
1
![Page 164: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/164.jpg)
Description
This parameter contains the total loss calculated from the Feeder.Loss and Diplexer.Loss values.
Defines how many diplexers connected as a series there can be in the antenna line.
Defines usage of the diplexer in the antenna path.
Defines the diplexer loss.
Defines the Diplexer total delay both in up- and downlink direction.
Defines the feeder loss of the antenna cable.
Defines usage of external filter.
Defines total delay for PHS filter.
This parameter defines Same Band Combiner Usage.
Same Band Combiner Product Code
The RTT delay caused by one diplexer.
Identifies the specific antenna.
The delay of the entire antenna line can be entered into this parameter, which is then used as the RTT value instead of calculating the value using the BTS Site Manager.
Defines the antenna RF cable length in metres.
This parameter is used by BTS Site Manager to calculate antenna round trip delay. The delay is 4.5 ns/m. The value
The type of the diplexer in the antenna line.
The options are FDIA and Other.The type of the diplexer in the antenna line.
The used value is Other.
Defines the voltage level supplied to the antenna line.
The values entered for this parameter depend on the MHA type:
Defines the usage of triplexer in the antenna path.
If used, the delay added is 25 ns. If the BTS Site Manager is used to calculate antenna round trip time delay, this The velocity factor is used to calculate RTT more exactly. The velocity factor can be obtained from the specifications of the used cable.
![Page 165: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/165.jpg)
Minimum HSUPA decoding capacity per LCG in Mbit/s
Defines Minimum amount of Users allocate to BaseBand in HSUPA.
This parameter defines HSUPA BB Sharing Usage.
Defines the external alarm description.
Defines is MHA active (AISG mode) or passive (Current mode).
Parameter for MHA telling LNA number inside one MHA
Divides WCELs into two groups. Baseband pooling is currently not supported, so all resources are allocated to the first group.
Defines WCELs which belong to a cell group; this links the WCELs to the cell groups. The LCR ID must be unique in the BTS.
Defines the FSP unit belonging to the local cell group.
The allowed values are FSM1/FSP1, FSM1/FSP2, FSM1/FSP3, -1 (Not defined).Defines the FSP unit belonging to the local cell group.
The allowed values are FSM1/FSP1, FSM1/FSP2, FSM1/FSP3, FSM2/FSP1, FSM2/FSP2, FSM2/FSP3 -1 (Not The name of the unit/module in the BTS.
This parameter is used in the offline commissioning mode of the BTS Site Manager.The number of the unit/module in the BTS.
This parameter is used in the offline commissioning mode of the BTS Site Manager.The variant of the unit/module.
This parameter is used in the offline commissioning mode of the BTS Site Manager.
Defines the external alarm lines.
In Use, Description, Polarity and Severity must be defined for input signals. There are 14 input signals in FlexiBTS. Defines the used polarity of the external alarm line: normally open or normally closed.
Normally_open: when the connector is open, there is no alarm.Defines the seriousness of the external alarm condition in question, for example:
Minor = 1
A configurable alarm threshold level for the mast-head amplifier, used if the MHA Alarm Detection parameter has the value 1 (in use).
Identifies the specific antenna.
The value is given as FR<id>-ANT<id>, where FRid=1..3 and ANTid=1..4. For example, FR1-ANT1.Defines the connection type for MHA/LNA.
Expected values: Internal | External | SharedDefines the MHA delay in the downlink direction.
If the BTS Site Manager is used to calculate RTT delay, this value must be specified for an "Other" type MHA. If the
Defines if alarm detection is used or not.
The options are 0 and 1.Defines the gain of the mast-head amplifier.
Defines the specific mast-head amplifier unit.
The value is given as FR<id>/MHA<id>, where FRid=1..3 and MHAid=1..4. For example, FR1/MHA1.
![Page 166: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/166.jpg)
Defines the product code of the unit in question.
Defines the serial number of the unit in question.
Defines the external alarm description.
Free text about the passive unit in question.
Defines the name of the passive unit in question.
Defines the product code of the passive unit in question.
Defines the serial number of the passive unit in question.
Defines the version of the passive unit in question.
Defines the configuration file name what is used for each TILT in RET configuration.
Defines the product code of the unit in question.
Defines the specific mast-head amplifier unit.
The value is given as FR<id>/MHA<id>/EXTERNAL<id>, where FRid=1..3 and MHAid=1..4, EXTERNALid=1...4 . For Defines the type of the MHA.
The supported MHA types are: WMHA, WMHB, WMHC, FLIA and Other.Defines the type of the MHA.
The supported MHA types are: WMHA, WMHB, WMHC, MDTA, MDPA, MDGA, MDDA and Other.Defines the type of the MHA.
The supported MHA types are: WMHA, WMHB, WMHC, WMHD, MDTA, MDPA, MDGA, MDDA, DTMAFV1,
Defines which antenna interface is scanned.
Expected value: FR<id>-ANT<id> and empty string
Defines the MHA delay in the uplink direction for an "Other" type MHA.
If the BTS Site Manager is used to calculate antenna round trip time delay, this value must be specified. If the RTT Defines the WMH connector in question for WMHC.
The options are BTS1 (Pass-through) and BTS2 (Power).
Defines the initial state of the external control line after a reset of the BTS.
The options are "On" and "Off". If the initial state is "On", current is going through.Defines the external alarm lines.
Description, In Use and Initial State must be defined for Control Signals. There are 6 output signals in FlexiBTS.
Identifies the specific antenna.
The value is given as FR<id>-ANT<id>, where FRid=1..3 and ANTid=1..4. For example, FR1-ANT1.
Defines the connection type for TILT.
Expected values: Internal | External | SharedManufacturer of TILT. Only two character vendor codes should be accepted, vendor codes are specified in AISG standard version 2.0
Defines wich antenna interface is scanned.
Expected value: FR<id>-ANT<id> and empty string
![Page 167: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/167.jpg)
Defines the serial number of the unit in question.
This parameter identifies the WBTS uniquely under its controlling RNC.
This parameter can be used for identification of the WCDMA BTS (Node B).
This parameter is currently not used.
This parameter is currently not used.
Defines the specific cabinet at the BTS site.
Defines the cabinet type.
Defines the name of the commissioning engineer
Defines the date of the commissioning. Expected type of date: yyyy.mm.dd.
Defines the specific Antenna tilting unit.
The value is given as FR<id>/TILT<id>/EXTERNAL<id>, where FRid=1..3 and TILTid=1..4, EXTERNALid=1...4 . For
Defines the RET IP address.
Note: At Netact Plan Editor, ASCU IP Address is represented by the parameters AscuIpAddress1 and
A free text field for defining the used BTS configuration. For example: 1+1+1 20 W.
Defines the mode of the commissioning.
Expexted values: Manual | Planned | Template | Reconfiguration.The location of the FR1 module.
Note: This parameter defines the location of the module or has the value -1 (Not defined). The value -1 (Not defined) The location of the FR2 module.
Note: This parameter defines the location of the module or has the value -1 (Not defined). The value -1 (Not defined) The location of the FR3 module.
Note: This parameter defines the location of the module or has the value -1 (Not defined). The value -1 (Not defined) The location of the FSM1 module.
Note: This parameter defines the location of the module or has the value -1 (Not defined). The value -1 (Not defined) The location of the FSM2 module.
Note: This parameter defines the location of the module or has the value -1 (Not defined). The value -1 (Not defined)
Defines the structure version of the Site Configuration File (SCF).
For FlexiBTS, the allowed file versions start from 380.Defines the structure version of the Site Configuration File (SCF).
For FlexiBTS, the allowed file versions start from 380.Defines how HSDPA users are allocated. The options are BTS and Cell.
If the selected option is BTS, it is possible to set 1 - 3 HSDPA cells, each of them situated in the same FSPA. The Defines how HSDPA users are allocated. The options are Full, BTS and Cell.
If the selected option is BTS, it is possible to set 1 - 3 HSDPA cells, each of them situated in the same FSPA. The Defines the usage of the Intelligent Shutdown feature.
If there are external batteries used this is "1" and intelligent shutdown timeout is filled in for local cells.
![Page 168: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/168.jpg)
Defines the type of the RNC. If a Nokia RNC is in use, there is no need to fill in any other RNC parameters.
Defines the WBTS SW version.
Defines the starting external alarm line for the mains power alarm when the intelligent shutdown is in use.
Default values:The number of mains power alarm lines.
The allowed values are 0,1 and 3.
Defines the used Time Zone.
The format is predefined, for example for Helsinki "(GMT+2) Europe/Helsinki".
The Local cell resource is an object, which consists of the HW required by one cell for transmission and receiving. Local cell resource id is used to address one particular local cell resource at the BTS. The LCR Id is unique within a BTS.Based on the hardware in the BTS, the BTS Site Manager checks which carrier values are allowed for BTS testing in each cell.
The radius of one cell.
The maximum range of the cell, i.e. the maximum distance from the cell site where a MS can have a radio connection The radius of one cell.
The maximum range of the cell, i.e. the maximum distance from the cell site where a MS can have a radio connection Defines the used configuration concept.
The options are:This parameter defines the default carrier used in tests for local cells.
The UARFCN values used are operator-specific and defined by the 3GPP. For example, for the 2100 MHz frequency, This parameter sets the SIB7 expiration timer for the UE. If a Nokia RNC is in use, this parameter can be left empty.
The allowed values are 1,2,4,8,16,32,64,128, and 256.This parameter sets the SIB7 expiration timer for the UE. If a Nokia RNC is in use, this parameter can be left empty.
The allowed values are 1,2,4,8,16,32,64,128, and 256.The antenna ID of the radio module assigned to the local cell.
Note: At Netact Plan Editor, FR ANT ID is represented by parameters FrAntId1, FrAntId2,...FrAntId12. The value is The backup time after which the cell starts to shut down itself.
This parameter is used only when battery backup is used. The time is given in seconds. 0 is immediate and 599940 is The maximum TX carrier power for the local cell in dBm.
The value is shown in Watts in the BTS Site Manager.RACH Capacity defines the HW capacity reserved for a RACH transport channel in the BTS.
RACH Capacity is given as a number of decoded RACH messages in a 10 ms or 20 ms radio frame. If a Nokia RNC A 3GPP Iub parameter for the gradual shutdown procedure.
Indicates in how many steps the transmission power for CPICH, BCH and all other common physical and transport A 3GPP Iub parameter for the shutdown procedure.
Indicates how long the actual shutdown procedure for CPICH, BCH and all other common physical and transport
![Page 169: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/169.jpg)
Range:
8
1..65000
-99..0
0..9999
1..3
0 (false), 1 (true)
4..5
4..5
-99..0
0..1000
-99..0
0..2
0 (false), 1 (true)
0..1000
0 (false), 1 (true)
1..20
0..1000
0 (false), 1 (true)
1..99
![Page 170: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/170.jpg)
1..20
0 (0 Mbit/s), 1 (less than 1.4 Mbit/s), 2 (1.4 Mbit/s), 3 (2.8 Mbit/s), 4 (4.2 Mbit/s), 5 (5.6 Mbit/s)
0..24
0 (false), 1 (true)
0..268435455
2..9
2..9
1..60
1..99
1..20
1..64
1..14
13..15
1 (Minor), 2 (Major), 3 (Critical), 4 (Notice)
0 (Current mode MHA), 1 (AISG MHA)
120..775
8
1..20
0..1000
0 (LNA1), 1 (LNA2)
0 (false), 1 (true)
0..99
8
![Page 171: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/171.jpg)
8
4..5
4..5
4..11
1..80
1..20
1..80
0..1000
4
1..64
2..3
1..6
1..60
1..60
1..60
1..60
1..20
8
0..216
1..20
2
1..80
1..20
![Page 172: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/172.jpg)
1..80
8
1..65534
1..15
2..15
7..15
1..50
1..64
1..4
1..80
6..15
0..50
0..50
0..50
0..50
0..50
1..20
1..20
1..10
1..10
3..4
3..4
0 (false), 1 (true)
![Page 173: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/173.jpg)
1..12
0..3
5
1..80
1..20
0..268435455
0..16383
100..60000
100..180000
1..10
0..16383
1..256
1..256
2..8
0..599940
39..46
2..8
1..16
5..45
![Page 174: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/174.jpg)
Step:
-
1
0.1
1
1
-
-
-
0.1
1
0.1
-
-
1
-
-
1
-
1
![Page 175: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/175.jpg)
-
-
1
-
1
-
-
-
1
-
-
1
-
-
-
1
-
-
1
-
-
0.1
-
![Page 176: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/176.jpg)
-
-
-
-
-
-
-
1
-
-
-
1
-
-
-
-
-
-
-
-
-
-
-
![Page 177: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/177.jpg)
-
-
1
-
-
-
-
-
1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
![Page 178: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/178.jpg)
1
1
-
-
-
1
1
100
100
-
1
1
1
-
1
1
1
1
5
![Page 179: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/179.jpg)
Unit:
characters
ns
dB
m
-
-
characters
characters
dB
ns
dB
characters
-
ns
-
characters
ns
-
-
![Page 180: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/180.jpg)
characters
-
-
-
-
characters
characters
characters
-
characters
characters
-
characters
-
-
mA
characters
characters
ns
-
-
dB
characters
![Page 181: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/181.jpg)
characters
characters
characters
characters
characters
characters
characters
ns
characters
characters
characters
-
characters
characters
characters
characters
characters
characters
characters
characters
characters
characters
characters
![Page 182: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/182.jpg)
characters
characters
-
characters
characters
characters
characters
characters
-
characters
characters
characters
characters
characters
characters
characters
characters
characters
characters
characters
characters
characters
-
![Page 183: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/183.jpg)
-
-
characters
characters
characters
-
-
m
m
characters
-
-
-
characters
s
dBm
-
-
s
![Page 184: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/184.jpg)
Formula for getting internal value
= UI_value
= UI_value * 10
= UI_value
= UI_value
= UI_value * 10
= UI_value
= UI_value * 10
= UI_value
= UI_value
= UI_value
![Page 185: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/185.jpg)
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value * 10
![Page 186: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/186.jpg)
= UI_value
= UI_value
![Page 187: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/187.jpg)
= UI_value
= UI_value
![Page 188: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/188.jpg)
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
![Page 189: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/189.jpg)
Default value
-3
2
Other
Other
-0.5
25
-3
false
0
25
82
![Page 190: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/190.jpg)
0
0
false
215
Internal
12
![Page 191: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/191.jpg)
BTS1
Off
Internal
![Page 192: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/192.jpg)
1
381
404
BTS
![Page 193: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/193.jpg)
WN3.2
20000
20000
1
120
43
2
10
15
![Page 194: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/194.jpg)
Default value notes
![Page 195: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/195.jpg)
Only two character vendor codes should be accepted, vendor codes are specified in AISG standard version 2.0
![Page 196: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/196.jpg)
Required on creation
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
![Page 197: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/197.jpg)
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
![Page 198: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/198.jpg)
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Optional
Mandatory
Mandatory
Mandatory
Mandatory
![Page 199: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/199.jpg)
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
![Page 200: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/200.jpg)
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
![Page 201: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/201.jpg)
Special value
![Page 202: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/202.jpg)
-1
![Page 203: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/203.jpg)
-1
![Page 204: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/204.jpg)
Related functions
![Page 205: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/205.jpg)
System information
![Page 206: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/206.jpg)
Modification
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
![Page 207: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/207.jpg)
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
![Page 208: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/208.jpg)
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
![Page 209: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/209.jpg)
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
![Page 210: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/210.jpg)
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
unmodifiable
![Page 211: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/211.jpg)
Modified
![Page 212: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/212.jpg)
Related parameters
![Page 213: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/213.jpg)
- MHAAlarmDetection of MHA - null- FileVersionIdentification of WBTS_HW - null
![Page 214: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/214.jpg)
Parameter relationships
![Page 215: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/215.jpg)
The parameter is used when the MHA Alarm Detection parameter has the value 1 (in use).
The parameter is used at commissioning file only when FileVersionIdentification >= 381.
![Page 216: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/216.jpg)
Related features
![Page 217: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/217.jpg)
Interfaces
![Page 218: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/218.jpg)
- EM <-> WBTS
![Page 219: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/219.jpg)
References
![Page 220: Parameter Compare WBTS WBTS4.0 F, WBTS6.0 F](https://reader035.fdocuments.net/reader035/viewer/2022082210/55cf9c2d550346d033a8e8de/html5/thumbnails/220.jpg)
Struct parameter