Paragon - Marabu Scandinavia · PDF fileec Marabu Scandinavia Marabu Scandinavia is a wholly...

Click here to load reader

  • date post

    03-Jul-2018
  • Category

    Documents

  • view

    232
  • download

    2

Embed Size (px)

Transcript of Paragon - Marabu Scandinavia · PDF fileec Marabu Scandinavia Marabu Scandinavia is a wholly...

  • Paragon

    Product Guide 2017

  • Dec 2017

    Marabu Scandinavia

    Marabu Scandinavia is a wholly owned subsidiary of Ma-rabu GmbH & Co., one of the world s leading manufac-turer of printing inks for digital , screen and pad printing. Marabu Scandinavia has offices in Malm, Stockholm , Gothenburg, Vejle, Oslo and Helsinki. Our philosophy is to be close to the customer to be able to help with service and expertise in digital , screen , pad and UV flexo. The majority of our customers are in industries where quality, excellence , and reliability are obvious ingredients of a relationship between customer and supplier. Therefore, we have built an organization with stock and service at seve-ral places in Scandinavia to quickly deliver an order. We have departments for color mixing, stretching and flat and clich manufacture so that the customer can get supplies tailored to their individual needs without delay. Last but not least , a well-trained staff with extensive experience of these printing methods.

    Sweden - Head Office Marabu Scandinavia AB+46 40 672 84 00info@marabu.sewww.marabu.se

    Sweden - StockholmMarabu Scandinavia AB+46 8 448 07 50info@marabu.sewww.marabu.se

    Sweden - GothenburgMarabu Scandinavia AB+46 40 672 84 00info@marabu.sewww.marabu.se

    Denmark - Vejle Marabu Scandinavia+45 70 10 00 67info@marabu.dkwww.marabu.dk

    Norway - OsloMarabu Scandinavia+47 22 73 50 00info@marabu.no,www.marabu.no

    Finland - VantaaMarabu Scandinavia+358 9 279 85 40info@marabu.fi,www.marabu.fi

    Get in touch with Marabu Scandinavia

  • PRODUCT CONTENTS

    Range Page

    UV Flexo Luna Range 3

    Uvdry Flexo Ultra L.M. Range 4

    Information on Flexo Blacks 5

    Information on UV Flexo Luna Titanium Whites 6

    Information on UV Flexo ULM Titanium Whites 7

    Information on UV Flexo Nestle Titanium Whites 8

    Uvdry Flexo Lightfast Range 9

    Uvdry Flexo Fluorescents Range 10

    Flexo and LED Flexo 1-Pack Metallics 11

    Flexo Scratch-Off Range and Flexo Additives 12

    LED Flexo Range 13

    Flexo Clearcoat Selector and Special Coatings Guide 14

    Waterbased 4000 Range 15

    Waterbased Additives and Waterbased Clearcoat Selector 16

    Uvdry Letterpress Range 17

    Uvdry Series 3000 Lightfast Range 18

    Uvdry Letterpress Fluorescents Range 19

    Letterpress 1-Pack Metallics and Letterpress Scratch-Off Range 20

    Letterpress Additives 21

    Letterpress Clearcoat Selector and Special Coatings Guide 22

    Please note that this is not an exhaustive list of the products in our range. If youneed something that is not listed here please call us to discuss your requirements.

    This guide is produced annually and is representative of our most up to dateproducts at the time of publishing.

  • 3

    UV FLEXO LUNA RANGEComplies to the EuPIA Exclusion Policy(Benzophenone, ITX and BDK Free)

    4 Colour Process Set Standard Strong LitePantone Process Yellow YF0005 YF0007Pantone Process Magenta RF0005 RF0007 RF0015Pantone Process Cyan CF0005 CF0007 CF0015Pantone Process Black BF0005 BF0005

    Base Colours CodePantone Yellow YF0001Mixing Orange YF0002Pantone 021 Orange YF0004Pantone Warm Red RF0002Pantone 032 Red RF0004Pantone Rubine RF0001Pantone Rhodamine RF0003Pantone Purple CF0003Pantone Violet VF0001Pantone 072 Blue CF0004Pantone Reflex Blue CF0002Pantone Dark Blue CF0006Pantone Process Blue CF0001Pantone Green GF0001Pantone Mixing / Untoned Black BF0002Tinting Meduim TF0001Opaque White WF0001

    Contact Paragon for the Product Information Sheet, which containstechnical information and printing recommendations.

    Recommended Gloss Lacquer for above inks:(See Clear Coat Selector for more information)

    Flexo High Gloss Lacquer (Low Viscosity) L512Flexo Gloss Lacquer (Overprintable) L508

  • 4

    UVDRY FLEXO ULTRA LOW MIGRATORY RANGESwiss Ordinance and EuPIA guidelines for indirect food packaging compliant

    4 Colour Process Set Standard StrongUltra L.M. Process Yellow ULMYF6803 ULMYF6905Ultra L.M. Process Magenta ULMRF6805 ULMRF6905Ultra L.M. Process Cyan ULMCF6805 ULMCF6905Ultra L.M. Process Black ULMBF6807 ULMBF6907

    Base Colours CodeUltra L.M. Yellow ULMYF6801Ultra L.M. Mixing Orange ULMYF6802Ultra L.M. 021 Orange ULMYF6804Ultra L.M. Warm Red ULMRF6802Ultra L.M. 032 Red ULMRF6804Ultra L.M. Rubine ULMRF6801Ultra L.M. Rhodamine ULMRF6803Ultra L.M. Purple ULMCF6803Ultra L.M. Violet ULMVF6801Ultra L.M. 072 Blue ULMCF6804Ultra L.M. Reflex Blue ULMCF6802Ultra L.M. Process Blue ULMCF6801Ultra L.M. Green ULMGF6801Ultra L.M. Mixing / Untoned Black ULMBF6802Ultra L.M. Tinting Meduim ULMTF6801Ultra L.M. Opaque White ULMWF6801

    Contact Paragon for the Product Information Sheet, which containstechnical information and printing recommendations.

    Recommended Gloss Lacquer for above inks:(See Clear Coat Selector for more information)

    Ultra L.M. High Gloss Lacquer (Low Viscosity) ULML912Ultra L.M. Gloss Lacquer (Overprintable) ULML908

  • 5

    Additional Information on Flexo BlacksComplies to the EuPIA Exclusion Policy(Benzophenone, ITX and BDK free)

    Description Code Recommendations

    UV Flexo LunaMixing /Untoned Black

    BF0002Designed for use in colour matchings. It can also beused as a spot black but will be a browner, less bluefinish than the Jobbing or Dense Black.

    Recommend aniloxes up to a volume of 9.0cm3/m2.

    UV Flexo LunaProcess Black BF0005

    Designed as a standard and strong black forprocess. Not to be used for solids at heavy volumesas cure is affected.

    Recommend anilox volumes of 2.0 5.0cm3/m2.UvDry FlexoProcess/Jobbing Black LMBF9817

    Designed as a standard black for process or solidblack printing. Can be used for solids at heaviervolumes.

    Recommend aniloxes up to a volume of 9.0cm3/m2.

    Additional Information on Flexo Ultra Low Migratory BlacksSwiss Ordinance and EuPIA guidelines for indirect food packaging compliant

    Description Code RecommendationsUvDry FlexoUltra L.M.Mixing/UntonedBlack

    ULMBF6802Designed for use in colour matchings. It can also beused as a spot black but will be a browner, less bluefinish than the Jobbing or Dense Black.

    Recommend aniloxes up to a volume of 9.0cm3/m2.UvDry FlexoUltra L.M.Process Black

    ULMBF6807Designed as a standard black for process. Not to beused for solids at heavy volumes as cure is affected.

    Recommend anilox volumes of 3.0 6.0cm3/m2.UvDry FlexoUltra L.M.Strong ProcessBlack

    ULMBF6907

    Designed as a strong black for process. Not to beused for solids at heavy volumes as cure is affected.

    Recommend anilox volumes of 2.0 5.0cm3/m2.

    UvDry FlexoUltra L.M.Process / JobbingBlack

    ULMBF6817

    Designed as a standard black for process or jobbingblack for printing solids.

    Can be used for solids at heavier volumes.

    Recommend anilox volumes of 7.0 9.0cm3/m2.

  • 6

    TITANIUM WHITE RANGE

    UV FLEXO LUNA RANGEComplies to the EuPIA Exclusion Policy(Benzophenone, ITX and BDK Free)

    Description Code RecommendationsUV Flexo LunaTitanium FirstDown White

    W348W348 is a dedicated ink for first down print applications,on supported stocks.

    Recommended anilox volumes of 10-30cm3/m2.UV Flexo LunaTitaniumFlexible FirstDown White

    W347

    W347 is a dedicated ink for first down print applications,where a flexible ink is required.

    Recommended anilox volumes of 8-10cm3/m2.

    UV Flexo LunaTitanium HotMelt LastDown White

    W307

    W307 is a dedicated ink for last down and reverse printapplications, such as shrink sleeves and wrap-around-labelling (WARL), when a hot melt adhesive is being appliedto the white ink to secure the decoration to the container.

    Recommended anilox volumes of 8-10cm3/m2.

    UV Flexo LunaTitanium LastDown White

    W334

    W334 is a dedicated ink for last down and reverse printapplications, such as shrink sleeves and wrap-around-labelling (WARL).

    Recommended anilox volumes of 8-10cm3/m2.UV Flexo LunaTitaniumLidding FirstDown White

    W320

    W320 is a dedicated ink for first down print applications,on to metal based lidding material.

    Recommended anilox volumes of 8-10cm3/m2.

  • 7

    TITANIUM WHITE RANGE

    UV FLEXO ULTRA LOW MIGRATORY RANGESwiss Ordinance and EuPIA guidelines for indirect food packaging compliant

    Description Code RecommendationsUV Flexo ULMTitanium FirstDown White

    ULMW648ULMW648 is a dedicated low migration ink for firstdown print applications, on supported stocks.

    Recommended anilox volumes of 10-30cm3/m2.UV Flexo ULMTitaniumFlexible FirstDown White

    ULMW647ULMW647 is a dedicated low migration ink for firstdown print applications, where a flexible ink isrequired.

    Recommended volumes of 8-10cm3/m2.

    UV Flexo ULMTitanium HotMelt Last DownWhite

    ULMW607

    ULMW607 is a dedicated low migration ink for lastdown and reverse print applications, such as shrinksleeves and wrap-around-labelling (WARL) when a hotmelt adhesive is being applied to the white ink tosecure the decoration to the container.

    Recommended volumes of 8-10cm3/m2.

    UV Flexo ULMTitanium LastDown White

    ULMW634

    ULMW634 is a dedicated low migration ink for lastdown and reverse print applications, such as shrinksleeves and wrap-around-labelling (WARL).

    Recommended volume of 8-10cm3/m2.UV Flexo ULMTitanium LiddingFirst DownWhite

    ULMW620ULMW620 is a dedicated low migration ink for firstdown print applications on to metal based liddingmaterial.

    Recommended volumes of 8-10cm3/m2.

  • 8

    TITANIUM WHITE RANGE

    UV FLEXO NESTLE COMPLIANT WHITESNestl, Swiss Ordinance and EuPIA guidelines for indirect food packaging compliant

    Description Code Recommendations

    UV Fl