P.A.P.A. Positive Air Pressure Attenuator · P.A.P.A.™ — Positive Air Pressure Attenuator...
Transcript of P.A.P.A. Positive Air Pressure Attenuator · P.A.P.A.™ — Positive Air Pressure Attenuator...
P.A.P.A.™ — Positive Air Pressure Attenuator
General:
The P.A.P.A. device is the perfect compliment to Studor Air Admittance
Valves (AAVs). Together they form the “Studor Single Pipe System” (SSPS),
a total solution to building venting requirements. The Studor AAVs deal with
the negative pressure in the system while the P.A.P.A. effectively deals with
the positive pressure transients. The combination of the two maintains the
perfect system balance quickly and efficiently throughout the system prevent-
ing siphonage and blowing of traps.
For commercial use in multi-story buildings
The P.A.P.A. can be used in conjunction with a conventional DWV
system or in a system with AAVs.
The P.A.P.A. device shall be connected to the system with a no-hub
coupling or flexible coupling.
Features: A. One gallon capacity B. Expandable capacity up to four gallons; series assembly provides addi-
tional capacity C. Operating temperatures –40 to 150°F. D. Rated for 5 PSI E. Limited lifetime warranty for replacement of defective devices. Materials: A. PVC housing B. Butylene bag
Performance Standard:
ASSE 1030—2016 Performance Requirements for Positive Pressure Reduc-
tion Devices for Sanitary Drainage Systems.
Code Compliance:
International Plumbing Code (IPC) - Section 105.2 Alternate Materials, Methods and Equipment
Uniform Plumbing Code (UPC) Section 301.2 Alternative Materials and Methods
SPECIFICATION SUBMITTAL SHEET
Manufacturer: Studor®, Inc. Connection Size: 3” spigot
Model #: P.A.P.A.™ Item #: 20357
Air Capacity US Gallons
1 unit 1
2 units 2
3 units 3
4 units 4
Series Assembly
Maximum number of units: 4
500 Distribution Parkway Collierville, TN 38017 ● 800-888-8312 ● 901-853-5001 ●FAX: 901-853-5008 ● www.ipscorp.com
3” spigot
7 ⅞”
29 ½”
PMG-1482 1030 WMTS463:2015 WM-020006
SAI Global