PantherBot Tool Changer
description
Transcript of PantherBot Tool Changer
![Page 1: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/1.jpg)
PantherBot Tool Changer
Mechanical Engineering Design 2 – MAE 419411 March 2009
Jameson L. Tai William Rae Justin Nunn
In Partnership with:
All logos in this presentation are courtesy of the Florida Institute of Technology Robotics and Spatial Systems Laboratory and the Florida Tech Office of Creative Services.
Project Design Review Presentation
![Page 2: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/2.jpg)
Project Introduction Overview
(Image Source: Robotics and Spatial Systems Laboratory (RASSL))
![Page 3: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/3.jpg)
IntroductionProject PurposeThe purpose of our project is to retrofit the PantherBot
in order to give it the capability to open doors and press wall panel buttons, so that it can roam autonomously inside the F. W. Olin Engineering Complex.
Design ObjectivesDesign tools that allow PantherBot autonomous access
around Olin Engineering ComplexSafe for people and robotDoesn’t damage school facilitiesTools must not obstruct access to robot compartmentsTools must be visually appeasing
![Page 4: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/4.jpg)
IntroductionGoalsTo apply our knowledge gained in class and
properly apply them to this projectTo apply technical skills, communication skills,
and the engineering design process into the project
To operate safely while protecting the PantherBot, its operator(s), and any persons or objects the PantherBot may come in contact with
To research on appropriate tools for the defined objectives and to adapt to current 6-DOF robotic arm
![Page 5: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/5.jpg)
Design and Analysis Update
(Image Source: Robotics and Spatial Systems Laboratory (RASSL))
![Page 6: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/6.jpg)
Combination of Tools
![Page 7: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/7.jpg)
Tool Analysis - Deformation
(Image Source: Robotics and Spatial Systems Laboratory (RASSL))
![Page 8: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/8.jpg)
Tool Analysis - Strain
(Image Source: Robotics and Spatial Systems Laboratory (RASSL))
![Page 9: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/9.jpg)
Tool Analysis - Stress
(Image Source: Robotics and Spatial Systems Laboratory (RASSL))
![Page 10: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/10.jpg)
Tool Holder-EH
(Image Source: Robotics and Spatial Systems Laboratory (RASSL))
![Page 11: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/11.jpg)
Tool Holder-EH
(Image Source: Robotics and Spatial Systems Laboratory (RASSL))
![Page 12: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/12.jpg)
Tool Holder-PH
(Image Source: Robotics and Spatial Systems Laboratory (RASSL))
![Page 13: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/13.jpg)
FabricationOverview
(Image Source: Robotics and Spatial Systems Laboratory (RASSL))
![Page 14: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/14.jpg)
Fabrication Progress (the Prod)Completed
Purchased
Not Complete Projected Finish Date
P-02 P-04 P-o1/P-02 (Welding) March 13, 2009
P-03 P-08 Final Assembly March 13, 2009
P-05 P-10
P-06 P-11
P-07
P-09
![Page 15: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/15.jpg)
The Prod
![Page 16: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/16.jpg)
Fabrication (the Enterprise)Completed
Purchased
Not Complete Projected Finish Date
E-01 E-03 E-02/E-06 (Welding)
March 13, 2009
E-04 E-05 March 12, 2009
Final Assembly March 13, 2009
![Page 17: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/17.jpg)
The Enterprise
![Page 18: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/18.jpg)
Fabrication (Tool Holders)Completed
Purchased
Not Complete Projected Finish Date
PH-01 March 13, 2009
EH-01 March 12, 2009
Mounting to March 13, 2009
![Page 19: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/19.jpg)
The Enterprise Holder
The Prod Holder
![Page 20: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/20.jpg)
FCRAR 20092009 Florida Conference on Recent Advances
in RoboticsMay 21 ~ 22, 2009Florida Atlantic UniversityJupiter, FloridaTechnical Paper and Showcase Presentation
“Design and Implementation of Building Navigational Tools for the PantherBot Mobile Robot”
Abstract approved by FCRAR 2009 Review Committee
(Image Source: http://www.eng.fau.edu/fcrar2009/index.html)
![Page 21: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/21.jpg)
Timeline
![Page 22: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/22.jpg)
Milestones and Deadlines• Complete Fabrication of Parts – March 13,
2009• Complete Coding – March 20, 2009• Complete Testing – March 27, 2009• FCRAR Final Report –March 30, 2009• Senior Design Showcase – April 3, 2009• FCRAR 2009– May 21~22, 2009
![Page 23: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/23.jpg)
ConclusionWe are wrapping up fabrication and will
begin testing soonDue to an ordering issue we were slightly
behind, but have reorganized and will be able to finish on time
We will be finishing our project and preparing for the Design showcase and FCRAR 2009.
![Page 24: PantherBot Tool Changer](https://reader035.fdocuments.net/reader035/viewer/2022062301/56815b1f550346895dc8d546/html5/thumbnails/24.jpg)
Questions?