PAL/NTSC Active Pixels 1928(H) × 1088(V) Lens … · Angle of View H:97° Signal System Active...

1
1080P FULL HD DIGITAL CAMERA AHD TVI CVI 960H SPECIFICATION Q-EYE-FG/FW CAMERA Image Sensor 1/2.7” 1080P Full HD digital image sensor Signal System PAL/NTSC Active Pixels 1928(H) × 1088(V) Lens 3.6mm MP Fixed Lens Angle of View H:97° Horizontal Resolution 1080P S/N Radio >50 dB ( AGC off ) Min Illumination 0 Lux (IR ON - IR-cut technology) S/N Ratio ≥50db (AGC OFF) Menu UTC Control Language ENG/CHN/ITA/SPA Auto Electronic Shutter PAL:1/50 - 1/100,000 sec NTSC:1/60 - 1/100,000 sec DNR 0-15 D-WDR ON/OFF Auto Gain Control Built-in Video Output AHD / TVI / CVI / CVBS Factory default is AHD Power Supply DC12V±10% Current Consumption 90 mA (IR OFF), 330 mA (IR ON) IR Led 36 pcs IR Distance in Effect Up to 30M IP Rating IP66 Storage Temperature -50 o C ~+90 o C Operating Temperature -30 o C ~+70 o C Dimension Φ120*86mm Weight 800g DIAGRAM Unit (mm) 4-IN-1 EYEBALL CAMERA ® KEY FEATURES •1080P/2.4MP • Day & night • Sens-Up • 3DNR Noise Reduction • IP66 rating • IR cut filter • Wide dynamic range (WDR) • Armoured housing Do’s and Don’ts Do not install the camera in extreme temperature conditions. Do use the camera under conditions where temperatures are within -30 ~+70 o C. Do not install the camera under unstable lighting conditions. Severe lighting change or flicker can cause the camera to work improperly. Do not install or use the camera in an environment where the humidity is high. It can result in poor-quality image. Do not disassemble the camera. There are no user-serviceable parts inside it. Opening or removing the camera’s cover may expose you to dangerous voltage or other hazards.Refer all servicing to qualified personnel only. Do not submerge in water for long periods of time. Please do not expose to abrasive liquids as it may cause long term damage to the camera. Do not touch the imaging surface of sensor. Use a soft cloth with alcohol to surface if it is touched accidentally. Ensure the supply voltage is correct before operation! Do not focus the camera on the sun directly. No need to be confused about which analogue camera format you need, this camera does them all! Lo-Call 1890 866 900 www.cctvireland.ie [email protected]

Transcript of PAL/NTSC Active Pixels 1928(H) × 1088(V) Lens … · Angle of View H:97° Signal System Active...

1080P FULL HD DIGITAL CAMERA • AHD • TVI • CVI • 960H

SPECIFICATION Q-EYE-FG/FWCAMERAImage Sensor 1/2.7” 1080P Full HD digital image sensor Signal System PAL/NTSCActive Pixels 1928(H) × 1088(V)Lens 3.6mm MP Fixed LensAngle of View H:97°Horizontal Resolution 1080PS/N Radio >50 dB ( AGC off )Min Illumination 0 Lux (IR ON - IR-cut technology)S/N Ratio ≥50db (AGC OFF)Menu UTC ControlLanguage ENG/CHN/ITA/SPA

Auto Electronic Shutter PAL:1/50 - 1/100,000 secNTSC:1/60 - 1/100,000 sec

DNR 0-15D-WDR ON/OFFAuto Gain Control Built-in

Video Output AHD / TVI / CVI / CVBSFactory default is AHD

Power Supply DC12V±10%Current Consumption 90 mA (IR OFF), 330 mA (IR ON)IR Led 36 pcsIR Distance in Effect Up to 30M IP Rating IP66Storage Temperature -50oC ~+90oCOperating Temperature -30oC ~+70oCDimension Φ120*86mmWeight 800g

Q-AHD2-EYE-FG

Attention: To reduce the danger of electrical shock, please don't open the case (or back cover) of camera.

■Do not install the camera in extreme temperature conditions. Do use the camera under conditions where temperatures are within -30 ~+70℃

■Do not install the camera under unstable lighting conditions. Severe lighting change or flicker can cause the camera to work improperly .

■Do not install or use the camera in an environment where the humidity is high. It can result in poor-quality image.

■Do not disassemble the camera. There are no user-serviceable parts inside it. Opening or removing the camera’s cover may expose you to dangerous voltage or other hazards.Refer all servicing to qualified personnel only.

■Do not submerge in water for long periods of time. Please do not expose to abrasive liquids as it may cause long term damage to the camera. ■Do not touch the imaging surface of sensor. Use a soft cloth with alcohol to surface if it is touched accidentally.

■Ensure the supply voltage is correct before operation!

■Do not focus the camera on the sun directly.

IP Rating IP66

-30℃ ~+70℃

ON/OFF

UNI-AHD2-EYE-FG

36 pcs

Horizontal Resolution 1080P

S/N Radio

Q-AHD2-EYE-FGUNI-AHD2-EYE-FGDimension Φ120*86mm

Angle of View H:97°

Signal System

Active Pixels 1928(H) × 1088(V)

Lens 3.6mm Mp lens

Weight 800g

IR Led

Video output

Built-in

D-WDR

>50 dB ( AGC off )

Min Illumination 0 Lux (IR ON - IR-cut technology)

Menu UTC Control

Language ENG/CHN/ITA/SPA

Specification

AHD / TVI / CVI / CVBS ** Factory default is AHD

Power Supply DC12V±10%

Current Consumption 90 mA(IR OFF) , 330 mA(IR ON)

Auto Electronic ShutterPAL:1/50 - 1/100,000 sec , NTSC:1/60 - 1/100,000 sec

DNR 0-15

USER MANUAL4 in 1 HD CAMERA

Storage Temperature -50℃ ~+90℃

Operating Temperature

Auto Gain Control

Model No.

Image Sensor 1/2.7” 1080P Full HD digital image sensor

PAL/NTSC

Cautions in Installation Diagram unit(mm)

Please don't open camera,it's with danger of electronic shock.

WARNING

25-30M IR Distance in Effect

DIAGRAM Unit (mm)

4-IN-1 EYEBALL CAMERA

®

KEY FEATURES•1080P/2.4MP• Day & night• Sens-Up• 3DNR Noise Reduction• IP66 rating• IR cut filter• Wide dynamic range (WDR)• Armoured housing

Do’s and Don’tsDo not install the camera in extreme temperature conditions.Do use the camera under conditions where temperatures are within -30 ~+70oC.Do not install the camera under unstable lighting conditions.Severe lighting change or flicker can cause the camera to work improperly.Do not install or use the camera in an environment where the humidity is high.It can result in poor-quality image.Do not disassemble the camera. There are no user-serviceable parts inside it.Opening or removing the camera’s cover may expose you to dangerousvoltage or other hazards.Refer all servicing to qualified personnel only.Do not submerge in water for long periods of time. Please do not expose toabrasive liquids as it may cause long term damage to the camera.Do not touch the imaging surface of sensor. Use a soft cloth with alcohol tosurface if it is touched accidentally.Ensure the supply voltage is correct before operation!Do not focus the camera on the sun directly.

No need to be confused about which analogue camera format you need, this camera does them all!

Lo-Call 1890 866 900

www.cctvireland.ie

[email protected]