Pal by nandini and jinal
-
Upload
jinal-chauhan -
Category
Education
-
view
138 -
download
2
Transcript of Pal by nandini and jinal
![Page 1: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/1.jpg)
1
Progressive Additional Lens
Presented by Patidar Rajnandini D.
Chauhan Jinal N.From,BMCO.
![Page 2: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/2.jpg)
2
PRESENTATION LAYOUTInformationHistory of PALConstructionMarkingPAL optical designPAL designAdvantages and Disadvantageslimitation of PALMeasurement of PALRe-marking of PALDispensing PALInternal PALPatient maneagementavailability
![Page 3: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/3.jpg)
3
INTRODUCTION
What are the Progressive Additional lenses?A lens designed for Presbyopes with Power Gradually increasing from the distance zone through a progreession to the near zone.
![Page 4: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/4.jpg)
4
HISTORY of PAL
The concept of PAL has been around since 1907,when first patent on Progressive Power lens was published by Owen Ave.
Varilux 1 was introduced by Essilor in France in the year 1959.
![Page 5: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/5.jpg)
5
• 1950 varilux from Essel (Essilor) hard design, symmetric lens• 1970 Varilux II Hard design, asymmetric• 1980 families of lenses (hard soft and in between) Lenses for different patient type or uses• 1990 new soft lenses (multi design) Lenses for all uses and adapted to all prescription. As worn lens design.
![Page 6: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/6.jpg)
6
PROGRESSIVE ADDITION LENSES
![Page 7: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/7.jpg)
7
PROGRESSIVE LENS CONSTRUCTIONA PAL has a certain distinct areas to the lens but those areas in a progressive lenses are
not visible.
![Page 8: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/8.jpg)
8
![Page 9: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/9.jpg)
9
• Progressive lens will have three distinct zones of vision.
![Page 10: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/10.jpg)
10
• DISTANCEThe upper portion of the lens basically for the distance portion .• NEARA designated zone in the lower portion of the lens,which
provides the necessary near addition or near power.• INTERMEDIATEA corridor in the central portion of the lens connects these two
zones, which increases progressively in plus power from the distance to near.
This zone is also known as “ Progressive zone ”.
![Page 11: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/11.jpg)
11
PROGRESSIVE ADDITION LENS MARKING
• All progressive addition lenses contain important markings , which are used to identify lenses and to assist in their fitting and verification.
• The impotant markings are explained below.
![Page 12: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/12.jpg)
12
![Page 13: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/13.jpg)
13
Progressive Marking
1. Itching points :(in fig A.)
2.Distance optical centre(DOC):
(in fig B.)
• They are two hidden circles, which are permanent mark on the lens at 34mm apart .
- When the ink marking is removed , they are made visible by fogging.
• Also known as prism reference point.
![Page 14: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/14.jpg)
14
3.Add power :(in fig C.)
4.Axis line :(in fig D.)
5.Distance power circle :(in fig F.)
• Hidden addition power situated at the temoral side and is made visible by fogging.
• 0-180 degree axis line passing through the DOC.
• This is the distance power circle to check the exact distance power with the help of lensometer.
![Page 15: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/15.jpg)
15
6. Fitting cross :(in fig E.)
7. Hidden logo :(in fig G.)
8. Near vision circle :(in fig H.)
• Fitting cross lies above the DOC.
• Situated nasally and is made visible by fogging when the ink mark is removed.
• 7mm to 9mm circle is the centre of the near vision area and is inset by 2.5mm.
![Page 16: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/16.jpg)
16
PAL OPTICAL DESIGN
1.Add power .2.Lengt of Progressive Corridor.3.width of distance and near zone.
![Page 17: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/17.jpg)
17
CONT…..1.Add Power:• The amount of astigmatism will be directly proportional
to the add power of the lens.
• E.g. A +2.00D addition will generally produce twice as much cylinder error as +1.00D addition.
![Page 18: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/18.jpg)
18
2.Length of the Progressive Corridor:• Shorter corridors produce more rapid power
change and higher levels of astigmatisms , but reduce the eye movement required to reach the near zone.
• Larger corridors provide more subtle power changes and lower levels of astigmatism , but increase the eye movement required to reach the near zones of the lens.
![Page 19: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/19.jpg)
19
• How the length of the Progressive Corridor and the add power can affect the rate of change and magnitude of the astigmatic error?
• *consider :- Addition= +2.50D corridor height=17mm so, 2.50/17=0.15D per millimeter
![Page 20: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/20.jpg)
20
• Therefore, the power of Progressive lens change has more rapidly down the Progressive corridor, as the addition power increases or the length of the corridor decreases.
![Page 21: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/21.jpg)
21
3.Width of distance and near zone:• Wider distance and near zones confine the
astigmatism to smaller regions of the lens surface which produces higher levels of astigmatism.
![Page 22: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/22.jpg)
22
PAL DESIGNS
• Mono design and Multi design• Asymmetry and symmetry design• Hard and soft design
![Page 23: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/23.jpg)
23
Mono design
• All Progressive had a single design for all power, is called mono design.
• In case of mono design PAL, a single design is used for all addition powers.
• E.g. mono design Ready stock progressive lenses.
![Page 24: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/24.jpg)
24
Multi design
• In multi design the position for near vision changes with the addition power change.
• In starts from soft design for low add power, as the add power increases it will turn to hard design lenses.
• Multi design tends characterstics change with priscription.
![Page 25: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/25.jpg)
25
Symmetric design
• In case of symmetrical progressive addition lens design,the right and left lenses are identical.
• Add is straight down from distance optical centre.
• Required rotation to achieve desired inset for near.
• E.g: 10 degree clockwise in left lens,and anti-clockwise in right lens.
![Page 26: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/26.jpg)
26
Conti…..
ADVANTAGES• We can give the inset
accordings to patient.
• No difference between right and left blank.
DISADVANTAGES• Disruption of binocular
vision as the wearer gazes laterally across the lens, since the astigmatism differed between the nasal and the temporal side of the distance zone.
![Page 27: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/27.jpg)
27
Asymmetric design
• Lens have preset inset for near.• Different lenses for right and left.• There is no need of the lens rotation in this
case.
![Page 28: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/28.jpg)
28
Cont…….
Advantages• Better adaptation.
• Improve binocular vision.
• More visual comfort and better convergence.
Disadvantages• Fixed inset may not match
with patient`s required inset.
![Page 29: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/29.jpg)
29
![Page 30: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/30.jpg)
30
Hard design
• Hard design is basic design, regular distance single vision.
• Wider distance zone.• Wider near zone.• More narrow and shorter progressive corridor.• More rapidly increasing levels of astigmatic
error.
![Page 31: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/31.jpg)
31
Cont……
Advantages• Large distance and near
area free from astigmatism.• Wider near zone even at
high RX.• Require less eye movement.
Disadvantages• High intensity aberration at
periphery .• More adaptation time .• Swim effect.
![Page 32: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/32.jpg)
32
Soft design
• Very useful for intermediate zone.• The soft design is one in which the change
from the near zone to the peripheral area is gradual when compared with a hard design.
• A soft design has a slower vertical change in power as the wearer looks from distance to near.
![Page 33: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/33.jpg)
33
Cont…..
• Narrow distance zones.• Narrow near zone.• Longer and wider progressive corridor.• More slowly increasing level of astigmatic
error.
![Page 34: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/34.jpg)
34
Cont……
Advantages • Soft design are easier ,More
rapid adaptation times
• Reduce swim effect.
Disadvantages• Smaller field at sharp vision.
• Need dropping of eye farther near to read.
![Page 35: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/35.jpg)
35
![Page 36: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/36.jpg)
36
PAL. ADVANTAGES AND DISADVANTAGES
Advantages
1. No visible line .2. Looks like a single vision.3. More natural vision, Continuous field of vision.4. More visual comfort.5. No image jump in vision from distance to near areas .6. Comfortable intermediate vision.
![Page 37: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/37.jpg)
37
dis
![Page 38: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/38.jpg)
38
Limitations of PAL Lens1. Differing Magnification throughout the lens:
• The changing curves on the front lens surface and the change in power throught of the channel and reading portion of the lens create varying magnification through out the lens.
• The result is that the vertical lines viewed through the progression zone exhibit skew distortion.
![Page 39: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/39.jpg)
39
Cont……
2. Restricted visual field:• Progressive addition lenses restrict our field of
vision particularly for intermediate or near areas.
3. Compromised Optics:
![Page 40: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/40.jpg)
40
Cont……
4. No control over the Inset of the Near Portion:
• Some progressive addition lens designs do have an inset , which varies with addition and/or distance correction, but not yet with interpupillary distance.
5.Difficult to check with Focimeters:• Progressive addition lenses are relatively difficult to
check with the help of focimeter.
![Page 41: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/41.jpg)
41
Measurement of progressive lenses
![Page 42: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/42.jpg)
42
RE-MARKING PAL
1ST STEP: Find hidden circle located 0-180 degree line, 4mm below the fitting cross of the lens.
2nd STEP: Below these hidden circle the near addition power on the temporal side and symbol identifying the particular lens on
the nasal side.
![Page 43: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/43.jpg)
43
3rd STEP: Place the lens on the respective brand layout card with two circles of the lens coinciding with the two circles on the card.
4th STEP: now mark the other markings.•The following option may be followed , --the micro ictching can be detected by reflecting light from the overhead lights of the lens surface.--Fogging the lens surface breathing warm moist air on the lens surface.--Position the light source behind the lens.
![Page 44: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/44.jpg)
44
Layout of progressive addition lens
![Page 45: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/45.jpg)
45
Essilor ZeissSeiko
![Page 46: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/46.jpg)
46
FRAME FRONT ADJUSTMENT
PANTOSCOPIC TILT
FACIAL WRAP
TEMPLE LENGTH
VERTEX DISTANCE
MONOCULAR PD
![Page 47: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/47.jpg)
47
![Page 48: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/48.jpg)
48
DISPENSING PAL1. Frame Front Adjustment: • Adjust the angle of the temples so that the
frame sits squarely on the face.
![Page 49: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/49.jpg)
49
CONT……..
2. Pantoscopic tilt:
• Adjust temples to achieve 8 to 12 degrees tilt, avoid contact with cheeks.
![Page 50: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/50.jpg)
50
CONT….
3. Facial Wrap:
• Ensure that the front of the frame follows the line of the face but not excessively.
![Page 51: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/51.jpg)
51
CONT…
4.Temple length:
• Adjust length of temple to minimize sliding .
![Page 52: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/52.jpg)
52
CONT…..
5.Vertex Distance :
• Minimum vertex distance by adjusting by adjusting nose pads but avoid contacting the eyelashes with lens.
![Page 53: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/53.jpg)
53
CONT….6 .monocular PD :
![Page 54: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/54.jpg)
54
![Page 55: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/55.jpg)
55
CONT……
7.Fitting Height:
The fitting cross on progressive addition lens must coincide with the pupil centre of the wearers in their natural posture.
![Page 56: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/56.jpg)
56
![Page 57: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/57.jpg)
57
![Page 58: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/58.jpg)
58
![Page 59: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/59.jpg)
59
Internal PAL• It is a big step forward in overcoming many of the
limitations of progressive lenses .• Seiko is first internal Progressive lens.• In an internal progressive lens,the curves producing
changing power are positioned on the back surface of the lens,and front surface is spherical.
• The design provides a field of vision that is 30% wider than a front side progressive lens because of progressive surface rests closer to the eyes.
![Page 60: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/60.jpg)
60
Cont......
1. Expansion of the visual fields.
2. Magnification differences between various areas of the lens are reduced.
![Page 61: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/61.jpg)
61
Tools for comparing Progressive Lenses1.Cylinder Contour Plots
( Isocyl charts)
Define the shape and width of the various zones.
show areas of equal cylindrical power on the front surface.
Or areas of equal cylindrical power in a given range.
![Page 62: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/62.jpg)
62
CONT.......
•Hard and Soft design contour plots
.
![Page 63: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/63.jpg)
63
CONT......
Usefulness of Contour plots:They can give useful information about the design type .
bThey can allow some comparisons with other designs.
Problems with contour plots: They only describes the shape of the front surface.They can not predict actual performance accurately
They do not consider other aberrations.
![Page 64: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/64.jpg)
64
CONT…..Problems with contour plots:
They only describes the shape of the front surface.
They can not predict actual performance accurately.
They do not consider other aberrations.
![Page 65: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/65.jpg)
65
CONT........2. Spherical Contour Plots;
•Define the length of the progression.• Show areas of equal spherical.
Power on the front surface.
![Page 66: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/66.jpg)
66
CONT…..
![Page 67: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/67.jpg)
67
CONT.........3. Isoacuity Plots:
•Define the useful zones of lens.
•Show areas of equal visual acuity.
![Page 68: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/68.jpg)
68
CONT……
![Page 69: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/69.jpg)
69
Determining Patient Suitability
1. OccupationRelative need for: Distance/ intermediate/near.
![Page 70: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/70.jpg)
70
CONT…….. Direction of gaze requirements:
![Page 71: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/71.jpg)
71
CONT…
3.ContraindicationsField of view:
![Page 72: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/72.jpg)
72
CONT………
•M
obility/head m
ovement:
![Page 73: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/73.jpg)
73
CONT……
Prescription :
1.Anisometropia2. Antimetropia3.High Cyls for certain axes
![Page 74: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/74.jpg)
74
Relative need for
Distance/ intermediate/near
![Page 75: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/75.jpg)
75
Direction of gaze requirements
![Page 76: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/76.jpg)
76
Fitting and Dispensing Progressive Lenses.
![Page 77: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/77.jpg)
77
• Fitting and Dispensing Progressive Lenses
![Page 78: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/78.jpg)
78
Delivery
1.Pre-delivery VerificationChecking the markings.Checking the frame details.Checking the distance Power and Prism.
![Page 79: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/79.jpg)
79
2.Remedies for Manufacturing Errors
1. Heights 2. Monocular PDs 3.Lenses swapped 4.Wrong power 5.Axis error
![Page 80: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/80.jpg)
80
3.On Eye Assessment
1.Check frame fit2.Check the position of the fitting crosses3.Check distance vision4.Check near vision5.Remove the ink markings
![Page 81: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/81.jpg)
81
•Checking the fitting cross heights and monocular PDs
![Page 82: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/82.jpg)
82
Patient Management
•How to use the lenses .•Troubleshooting
![Page 83: Pal by nandini and jinal](https://reader034.fdocuments.net/reader034/viewer/2022042600/58cedc9c1a28abd4098b6651/html5/thumbnails/83.jpg)
83
Availablity• Digital • Seiko• xperio• Shamir• Hoya • Sola• Kodak• Zeiss• younger• Essilor (varilux physio DRx) varilux is the top brand for PAL ,now. the top progressive lens brand due to
the technology and research used in manufacturing a lens that will create a sharp image and smooth transition from different distances.