MARTEC 36 rue de la Mairie - Le Puiset-Doré - F 49600 Montrevault S/Evre

Tél + 33 2 41 756 931 - www.martec-hardfacing.com - martec@martec-hardfacing.com

RCS ANGERS B 403 909 724

MADUR® Hardfacing products

underlayer of powder to avoid

Grains size Type of grains Diam. 4 Diam. 5 Diam. 6,5 Diam. 8

MADUR 8205 106-500 µm Crushed 15820504 15820505 15820506 15820508

MADUR 8208 106-800 µm Crushed 15820804 15820805 15820806 15820808

MADUR 8212 106-1200 µm Crushed 15821205 15821206 15821208

MADUR 8220 106-2000 µm Crushed 15822006 15822008

MADUR 8305Matrix hardness 30 HRC

MADUR 9205 90-500 µm Spherical 15920504 15920505 15920506 15920508

MADUR 9208 90-800 µm Spherical 15920804 15920805 15920806 15920808106-250 µm Crushed250-500 µm Spherical106-400 µm Crushed400-800 µm Spherical

MADUR® hardfacing flexible cords

Fused Tungsten Carbide grains are crushed or spherical particles.

MADUR® cords are applied using an oxy-acetylene torch.

It is advisable to spray first an

MADUR® cords are flexible cords composed of fused Tungsten Carbide grains mixed in a Nickel base matrix,hardness 40 HRC.

Sph

erical tun

gste

n ca

rbide

oxidation of the parts.

Fused Tungsten Carbide grains specification

Available diametersItem Cord

MADUR 9505

MADUR 9508

15950504 15950505 15950506 15950508

15950804 15950805 15950806 15950808

15830505 15830506 15830508Cast tun

gste

n ca

rbide

106-500 µm Crushed 15830504

0,5 kg 1 kg 5 kg

MADUR 20010 Nickel-Chromium 20 HRC 1090°C 11P20010 11M20010 11G20010

MADUR 30010 Nickel-Chromium 30 HRC 1070°C 11P30010 11M30010 11G30010

MADUR 40010 Nickel-Chromium 40 HRC 1060°C 11P40010 11M40010 11G40010

MADUR 60010 Nickel-Chromium 60 HRC 1040°C 11P60010 11M60010 11G60010

MADUR 62010 Nickel-Chromium 60 HRC 20% Crushed 40 to 80 µm 1040°C 11P62010 11M62010

MADUR 63510 Nickel-Chromium 60 HRC 35% Crushed 40 to 80 µm 1040°C 11P63510 11M63510

MADUR 64010 Nickel-Chromium 60 HRC 40% Crushed 40 to 80 µm 1040°C 11P64010 11M64010

MADUR 64015 Nickel-Chromium 60 HRC 40% Pellets 40 to 150 µm 1040°C 11P64015 11M64015

MADUR 64510 Nickel-Chromium 60 HRC 45% Crushed 40 to 80 µm 1040°C 11P64510 11M64510

MADUR 65010 Nickel-Chromium 60 HRC 50% Crushed 40 to 80 µm 1040°C 11P65010 11M65010

MADUR 66010 Nickel-Chromium 60 HRC 60% Crushed 40 to 80 µm 1040°C 11P66010 11M66010

Contact us

Contact us

Pre-mixed

Nickel-based

powders with

carbide grains

Melting temperature

Packaging

MADUR® hardfacing electrodes

MADUR® flux wire cored for hardfacing

MADUR® hardfacing powders

Nickel-based hardfacing powders

Two ranges of MADUR® powders:

Nickel-based hardfacing powders with a hardness from 20 to 60 HRC.Nickel-based hardfacing powders pre-mixed with crushed or pellets fused tungsten carbide with a hardness of 60 HRC.

MADUR® powders are applied using an oxy-acetylene torch.

Item powder Alloy HardnessCarbide grains

contentCarbide grains

size

09/11/2019

The picture shows a

NATIONAL case

Case 20.001 1Case 20.002 1Mixer 20.016 1Handle 20.017 1Mixer 20.018 1Handle 20.019 1Powder gun nr 4 20.020 1Powder gun nr 6 20.022 1Cord gun nr 5 20.023 1 Acetylene connection 20.065 1 1Powder gun nr 1 20.026 1 Oxygen connection 20.066 1 1Powder gun nr 2 20.027 1 Oxy-acetylene twin welding hose 20.079 2,80 m 2,80 mPowder gun nr 3 20.028 1 MADUR powder 2010 11P20010 0,5 KgPowder tube for mixer 20.033 5 5 MADUR powder 3010 11P30010 0,5 KgSealing for mixer 20.034 1 1 MADUR powder 4010 11M40010 1 Kg 1 KgSpanner 20.035 1 1 MADUR powder 6010 11P60010 0,5 KgTips cleaner 20.036 1 1 MADUR powder 6210 11P62010 0,5 KgLighter 20.038 1 1 MADUR powder 6410 11P64010 0,5 Kg

Torch cases

Cases equipmentNATIONAL

case ref. 20.009

MEDIO case

ref. 20.008

Cases equipment

2 types of torch cases are available according to your needs of hardfacing:

NATIONAL torch case designed for thick deposits of cord and powder.

MEDIO torch case designed for fine deposits especially used in the glass industry.

NATIONAL case

ref. 20.009

MEDIO case

ref. 20.008