page 1 of 3 CAROMA FORMA CLEANFLUSH BACK …...Tech Page Version: 2 655 364 350 167 150 415 788 cent...

3
Disclaimer: Products in this specication manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specications or delete models from their range without prior notication. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors. Tech Page Version: 2 655 364 350 167 150 415 788 centre of back inlet connection 125 440 185 pan outlet 862 approx. 185 210 Pan foot level Pan foot level 245 180 Important 22mm approx. projection from wall 1 /2" B.S.P. Nipple Finished wall Bottom inlet hole version Water supply (either left or right hand side) 210 To see the complete CAROMA range go to www.reece.com.au/bathrooms All dimensions are in millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specications without notice. SPECIFICATIONS Recommended use Domestic, hotel and commercial Material Pan: Vitreous china Cistern: Vitreous china Seat: Thermoset Colour White Weight Pan: 35 kg Cistern: 16 kg Water inlet Bottom inlet and back entry versions available Inlet valve Suitable for dynamic ow pressures of 30 kPa to 1000 kPa. Bowl conguration Universal trap for S or P trap installations Rim conguration Rimless Seat Arc soft close quick release thermoset toilet seat Cistern xing Cistern is xed directly to the pan with a robust concealed base xing system without the need for wall xing. Pan xing Pan can be bedded to the oor with a sand cement mixture, or bedded with an acetic cured silicone sealant and xed with the D82 Concealed Fixing Bracket, corrosion resistant screws and pan guard washers. CLEANING RECOMMENDATIONS We recommend the use of soapy water or approved cleaners. This product should not be cleaned with abrasive materials. Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions. CAROMA FORMA CLEANFLUSH BACK TO WALL RIMLESS TOILET SUITE page 1 of 3 The more stars the more water efficient WATER RATING www.waterrating.gov.au In accordance with AS/NZS 6400 Licence No. 0001 Caroma Industries Limited 4.5 L per full flush / 3 L per half flush 3.5 litres average flush

Transcript of page 1 of 3 CAROMA FORMA CLEANFLUSH BACK …...Tech Page Version: 2 655 364 350 167 150 415 788 cent...

Page 1: page 1 of 3 CAROMA FORMA CLEANFLUSH BACK …...Tech Page Version: 2 655 364 350 167 150 415 788 cent r e of back inlet connection 125 440 185 pan outlet 862 app r ox. 185 210 Pan foot

Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.

Tech Page Version: 2

655

364

350

167

150

415

788

cent

re o

f bac

k in

let c

onne

ctio

n

125

440

185pan outlet

862

appr

ox.

185

210

Pan foot levelPan foot level

245

180

Important22mm approx.projection from

wall1/2" B.S.P.

Nipple

Finishedwall

Bottom inlet hole version

Water supply (either left or right hand side)

210

To see the complete CAROMA range go to www.reece.com.au/bathrooms

All dimensions are in millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.

SPECIFICATIONSRecommended use Domestic, hotel and commercial

Material Pan: Vitreous chinaCistern: Vitreous chinaSeat: Thermoset

Colour White

Weight Pan: 35 kgCistern: 16 kg

Water inlet Bottom inlet and back entry versions available

Inlet valve Suitable for dynamic flow pressures of 30 kPa to 1000 kPa.

Bowl configuration Universal trap for S or P trap installations

Rim configuration Rimless

Seat Arc soft close quick release thermoset toilet seat

Cistern fixing Cistern is fixed directly to the pan with a robust concealed base fixing system without the need for wall fixing.

Pan fixing Pan can be bedded to the floor with a sand cement mixture, or bedded with an acetic cured silicone sealant and fixed with the D82 Concealed Fixing Bracket, corrosion resistant screws and pan guard washers.

CLEANING RECOMMENDATIONSWe recommend the use of soapy water or approved cleaners.This product should not be cleaned with abrasive materials.Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.

CAROMA FORMA CLEANFLUSH™

BACK TO WALL RIMLESS TOILET SUITE

page 1 of 3

The more stars the more water efficient

WATER RATINGwww.waterrating.gov.au

In accordance with AS/NZS 6400

Licence No. 0001Caroma Industries Limited

4.5 L per full flush / 3 L per half flush

3.5 litres average flush

Page 2: page 1 of 3 CAROMA FORMA CLEANFLUSH BACK …...Tech Page Version: 2 655 364 350 167 150 415 788 cent r e of back inlet connection 125 440 185 pan outlet 862 app r ox. 185 210 Pan foot

CAROMA FORMA CLEANFLUSH™

BACK TO WAll RIMlESS TOIlET SUITE

Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference

INSTAllATION INSTRUCTIONS

Note: All height dimensions to underside of pan, make allowance for bedding.

Bedding: The pan should be bedded to the floor with a sand cement mixture of 3:1 to a depth of 60mm. Do not use lime orfast drying cement in the bedding mixture. When bedded the back of the foot of the pan should be approximately 10mmabove the finished floor.

Screw fixing: The pan should be bedded with an acetic cured silicone sealant and fixed to the floor using the supplied D82 Concealed Fixing Bracket.

788

cent

re o

f bac

k en

try c

onne

ctio

n

655

364

350

167

185pan outlet

185

D82 ConcealedFixing Bracket

185

440

Pan footlevel

Pan foot levelPan footlevel

Uni-Orbital® Connector Setout Range 60mm to 200mm (up to 50mm sideways adjustment)

140 recommended(range 60 – 200mm with

Uni-Orbital® connector supplied)

125

150

415

210

180

Water supply (either left or right hand side)

210

465

460

min

. to

480

max

.fin

ishe

d flo

or to

top

of s

eat

for a

mbu

lant

inst

alla

tions

862

appr

ox.

245

Important22mm approx.projection from

wall1/2" B.S.P.

Nipple

Finishedwall

Bottom inlet hole version

page 2 of 3

Page 3: page 1 of 3 CAROMA FORMA CLEANFLUSH BACK …...Tech Page Version: 2 655 364 350 167 150 415 788 cent r e of back inlet connection 125 440 185 pan outlet 862 app r ox. 185 210 Pan foot

Don’t risk it, use a licensed plumber.™

REECE PROdUCT QUAlITY gUARANTEE

You have purchased a quality product from Reece Australia Pty Ltd ABN 84 004 097 090 (“Reece”). This product is covered by a 10 year replacement product warranty and a 12 month warranty over spare parts and labour.

10 YEAR WARRANTY – dOMESTIC USE

This warranty covers faults in the product construction, mate-rial and assembly. Products which are within 10 years from the date of purchase, found upon inspection by an authorised Reece representative, to be defective in construction, material or assembly, will be repaired or exchanged with an equiva-lent product free of charge. Replaced items become Reece’s property.

All replacement products will be available for collection without charge to the customer at the nearest Reece branch to the customer’s location, or elsewhere as agreed between the customer and Reece.

labour and Spare Parts

The labour for the replacement of products and spare parts to which this warranty applies will be supplied by Reece or relevant supplier using licensed plumbers engaged by Reece or relevant supplier within 1 year from the date of purchase. Spare parts (includes the toilet seat) other which are within 1 year from the date of purchase found upon inspection by an authorised Reece representative to be defective in construc-tion, material or assembly, will be replaced free of charge.

Warranty Conditions

This warranty will apply only under all of the following conditions:

•Theitemhasbeeninstalledbyalicensedplumber

•Theitemhasbeeninstalledforandsubjectedtodomestic residential use only

•Failureisduetoafaultinthemanufactureoftheproduct

•Proofofpurchase(includingthedateofpurchase)is provided

•Theinstallationoftheproductisinaccordancewiththe instructions provided.

This warranty does not cover products purchased as an ex-display without being fully checked and tested for sale by the manufacturer.

This warranty does not include faults caused by:

•Unsuitableorimproperuse

•Incorrectinstallationorinstallationnotinaccordancewith the instructions provided

•Installationorpartinstallationbythepurchaseroranyper- sonotherthanaLICENSEDPLUMBER

•Normalwearandtear

•Inadequateorcompletelackofmaintenance

•Chemical,electrochemicalorelectricalinfluences

•Harshdetergentsorabrasivecleanersusedonproduct finishes

1 YEAR WARRANTY – COMMERCIAl USE

‘Commercial’ use is all use other than for normal domestic residential purposes, including use in non-business places as in public buildings, schools, sports centres and in establish-ments that contain private bathrooms with high frequency of use by many individuals, such as hotels, motels, retirement villages and hospitals.

The Commercial warranty covers this product against manu-facturing faults in the construction, material and assembly of both the finished products and any spare parts for a period of 1 year from the date of purchase. Products and spare parts which are found upon inspection by an authorised Reece representative to be defective in construction, material or as-sembly will be repaired or exchanged free of charge. Replaced items become Reece’s property. The labour for the replace-ment of products and spare parts to which this warranty applies will be supplied by Reece or relevant supplier using licensed plumbers engaged by Reece or relevant supplier. The Warranty Conditions and exclusions which apply to the domestic use warranty also apply to this commercial warranty.

EXClUSIONS

To the fullest extent permitted by law, Reece excludes all liabili-ty for damage or injury to any person, damage to any property, and any indirect consequential or other loss or damage.

ClAIM PROCEdURE

For all warranty queries customers are to contact the branc where the product was purchased. These details can be found on your purchase invoice.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensa-tion for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

10YEARQ

U

ALITY GUARANTEE

CAROMA FORMA CLEANFLUSH™

BACK TO WAll RIMlESS TOIlET SUITE

page 3 of 3