PACKAGE 3-Desks and Offices (2)
-
Upload
yhianne-bermudez -
Category
Documents
-
view
216 -
download
2
description
Transcript of PACKAGE 3-Desks and Offices (2)
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Tag: DE01
Item: Workstation, open office
Performance
Specifications: Left handed and right handed L-shaped open office workstations with low dividers
* Wood veneer worksurfaces and modesty panels, flat cut book match wood grain
* 32mm thick medium density fiberboard worksurfaces with tapered edge detail
* Architectural grade .5mm thick wood veneer
* 355mm high fabric covered tackable privacy panels with perimeter aluminum trim
* Dual channel anodized aluminum accessory rail applied full length to interior
surface of each privacy panel
* 200mm x 75mm extruded aluminum table legs with removable panel for access
* One 750mm wide fixed undercounter two drawer lateral file pedestal, locks
* Fixed pedestal to be steel case with laminate drawer fronts, metallic paint on
side panels, leveling feet
* One 460mm wide mobile pedestal with two box drawers, one pencil tray and one
file drawer, locks, dual wheel swivel locking casters
* Mobile pedestal to be steel case with metallic paint finish, laminate drawer fronts
* 10mm thick white translucent glass divider panels with aluminum supports to be
provided between each left and right handed workstation per furniture plans
* Anodized aluminum hanging accessories to include two legal trays, three
bookshelves, one pencil cup and one flower vase per workstation
* Aluminum desktop accessory to include one storage tray per workstation
* Durable polyurethane clear lacquer wood finish
* 750mm x 460mm formed aluminum movable corner desk surface, vinyl fabric
covering, charcoal grey
* 50mm x 100mm plastic grommet at corner of workstation, grey
* Low profile wire management channel below desktop at rear of worksurfaces
* 355mm wide x 9.5mm high aluminum bar door pulls, horizontal orientation
Dimensions: Overall: 2440mm L x 1750mm W x 1100mm H
Finishes: Wood: WD1 Natural Cherry
Aluminum: FIN2 Anodized Aluminum
Metallic Paint: FIN3 Metallic Silver Powdercoat
Laminate: FIN4 Pionite SW826 Angel White
Panel Fabric: UPH2 Maharam Reply 901880/002 Apple
Image: Indicative of required aesthetic only.
Furniture Specification Sheet
Page 1 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE01
Item: Workstation, open office
Location: Refer to Furniture Layout Plans
Illustration shows two workstations with divider panel between left and right handed
workstations.
Components for left and right handed workstations are to be determined per
furniture plans.
Requirements for divider panels and tackable privacy panels are to be determined
per arrangement of workstations on furniture plans.
.
Furniture Specification Sheet
Page 2 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE01
Item: Workstation, open office
Illustrations show one left handed and one right handed workstation
Furniture Specification Sheet
Page 3 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE02
Item: Workstation, open office
Performance
Specifications: Left handed and right handed L-shaped open office workstations with low dividers
* Wood veneer worksurfaces and modesty panels, flat cut book match wood grain
* 32mm thick medium density fiberboard worksurfaces to have tapered edge detail
* Architectural grade .5mm thick wood veneer
* 355mm high fabric covered tackable privacy panels with perimeter aluminum trim
* Dual channel anodized aluminum accessory rail applied full length to interior
surface of each privacy panel
* 200mm x 75mm extruded aluminum table legs with removable panel for access
* One 460mm wide mobile pedestal with two box drawers, one pencil tray and one
file drawer, locks, dual wheel swivel locking casters
* Mobile pedestal to be steel case with metallic paint finish, laminate drawer fronts
* 10mm thick white translucent glass divider panels with aluminum supports to be
provided between each left and right handed workstation per furniture plans
* Anodized aluminum hanging accessories to include two legal trays, three
bookshelves, one pencil cup and one flower vase per workstation
* Aluminum desktop accessory to include one storage tray per workstation
* Durable polyurethane clear lacquer wood finish
* 750mm x 460mm formed aluminum movable corner desk surface, vinyl fabric
covering, charcoal grey
* 50mm x 100mm plastic grommet at corner of workstation, grey
* Low profile wire management channel below desktop at rear of worksurfaces
* 355mm wide x 9.5mm high aluminum bar door pulls, horizontal orientation
Dimensions: Overall: 1825mm W x 1750mm D x 1100mm H
Finishes: Wood: WD1 Natural Cherry
Aluminum: FIN2 Anodized Aluminum
Metallic Paint: FIN3 Metallic Silver Powdercoat
Laminate: FIN4 Pionite SW826 Angel White
Panel Fabric: UPH2 Maharam Reply 901880/002 Apple
Image: Indicative of required aesthetic only.
Furniture Specification Sheet
Page 4 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE02
Item: Workstation, open office
Location: Refer to Furniture Layout Plans
Illustration shows two workstations with divider panel between left and right handed
workstations.
Components for left and right handed workstations to be determined per
furniture plans.
Requirements for divider panels and tackable privacy panels are to be determined
per arrangement of workstations on furniture plans.
Furniture Specification Sheet
Page 5 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE02
Item: Workstation, open office
Illustrations show one left handed and one right handed workstation
Furniture Specification Sheet
Page 6 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE03
Item: Workstation, reception
Performance
Specifications: U-shaped open office two person workstation with transaction tops
* Wood veneer transaction counters and worksurfaces with solid wood edge band
* Wood veneer front overlay panels, fixed storage cabinets and mobile pedestals
* Flat cut book match wood grain veneer typical
* 38mm thick veneer counters and worksurfaces to have square edge detail with
mitered and coped details at intersections, impregnated polycell backer finish
* Lacquer painted wood base panels and gallery privacy panels, pearlized
* Durable polyurethane clear lacquer at natural wood finish
* One matching solid wood grommet unit in each lower worksurface section
* 750mm wide two door wood cabinet on each side with one adjustable shelf each
* Two 460mm wide wood mobile pedestals with one box drawer, a pencil tray and
one file drawer each, locking swivel casters
* Drawers to have three stage full extension steel ball bearing slides
* Drawer interiors to have matching veneer and finish as worksurfaces
* Concealed self closing door hinges with 90 degree opening, fully adjustable
* Desktop accessories to include two anodized aluminum storage trays
* 50mm x 100mm plastic grommet at each corner of workstation, grey
* Low profile wire management channel below desktop at rear of worksurfaces
* 355mm wide x 9.5mm high stainless steel bar door and drawer pulls
* Locks at all storage units
* Adjustable floor glides
Dimensions: Overall: 5030mm W x 1905mm D x 1070mm H
Finishes: Wood: WD1 Natural Cherry
Painted Lacquer Wood Surfaces: WD4 Pearl White Lacquer
Metal Trim: FIN5 Satin Stainless Steel
Image: Indicative of required aesthetic only.
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 7 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE03
Item: Workstation, reception
Furniture Specification Sheet
Page 8 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE03
Item: Workstation, reception
Furniture Specification Sheet
Page 9 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE04
Item: Workstation, reception
Performance
Specifications: U-shaped open office two person workstation with transaction tops
* Wood veneer transaction counters with tapered edge detail and wood edge band
* Wood veneer modesty panels, flat cut book match wood grain
* Laminate worksurfaces with tapered edge detail and clear acrylic edge band
* 32mm thick medium density fiberboard worksurfaces
* Translucent glass privacy panels at gallery with anodized aluminum support trim
* Dual channel anodized aluminum accessory rail applied full length to interior
surface of each gallery panel
* 200mm x 75mm extruded aluminum table legs with removable panel for access
* Two 460mm wide mobile pedestals with two box drawers, a pencil tray and one
file drawer each, locks, dual wheel swivel locking casters
* Mobile pedestals to be steel case with metallic paint finish, laminate drawer fronts
* Anodized aluminum hanging accessories to include four legal trays, six
bookshelves, two pencil cups and two flower vases
* Desktop accessories to include two anodized aluminum storage trays
* Two 750mmx460mm formed aluminum movable corner desk surfaces, vinyl fabric
covering, charcoal grey
* 50mm x 100mm plastic grommet at each corner of workstation, grey
* Low profile wire management channel below desktop at rear of worksurfaces
* 355mm wide x 9.5mm high aluminum bar door pulls, horizontal orientation
* Durable polyurethane clear lacquer wood finish
Dimensions: Overall: 3660mm L x 2490mm W x 1075mm H
Finishes: Wood: WD1 Natural Cherry
Aluminum: FIN2 Anodized Aluminum
Metallic Paint: FIN3 Metallic Silver Powdercoat
Laminate: FIN4 Pionite SW826 Angel White
Image: Indicative of required aesthetic only.
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 10 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE04
Item: Workstation, reception
Furniture Specification Sheet
Page 11 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE04
Item: Workstation, reception
Pedestals to have two box drawers, one pencil tray and one file drawer
Furniture Specification Sheet
Page 12 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE05
Item: Workstation, reception
Performance
Specifications: L-shaped open office one person workstation with transaction top
* Laminate transaction counter and worksurfaces with tapered edge detail and
clear acrylic edge band
* 32mm thick medium density fiberboard worksurfaces
* Laminate modesty panels and pedestal fronts
* Translucent glass privacy panels at gallery with anodized aluminum support trim
* Dual channel anodized aluminum accessory rail applied full length to interior
surface of each gallery panel
* 200mm x 75mm extruded aluminum table legs with removable panel for access
* One 460mm wide fixed undercounter two drawer lateral file pedestal, locks
* Fixed pedestal to be steel case with laminate drawer fronts, metallic paint on
side panels, leveling feet
* One 460mm wide mobile pedestal with two box drawers, one pencil tray and one
file drawer, locks, dual wheel swivel locking casters
* Mobile pedestal to be steel case with metallic paint finish, laminate drawer fronts
* 750mm x 460mm formed aluminum movable corner desk surface, vinyl fabric
covering, charcoal grey
* 50mm x 100mm plastic grommet at corner of workstation, grey
* Low profile wire management channel below desktop at rear of worksurfaces
* Anodized aluminum hanging accessories to include two legal trays, three
bookshelves, one pencil cup and one flower vase per workstation
* Aluminum desktop accessory to include one storage tray per workstation
* 355mm wide x 9.5mm high aluminum bar door pulls, horizontal orientation
Dimensions: Overall: 2490mm L x 1830mm W x 1075mm H
Finishes: Aluminum: FIN2 Anodized Aluminum
Metallic Paint: FIN3 Metallic Silver Powdercoat
Laminate: FIN4 Pionite SW826 Angel White
Image: Indicative of required aesthetic only.
Furniture Specification Sheet
Page 13 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE05
Item: Workstation, reception
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 14 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE05
Item: Workstation, reception
Furniture Specification Sheet
Page 15 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE06
Item: Workstation, open office
Performance
Specifications: Left handed and right handed L-shaped open office workstations with low dividers
* Wood veneer worksurfaces and modesty panels, flat cut book match wood grain
* 32mm thick medium density fiberboard worksurfaces to have tapered edge detail
* Architectural grade .5mm thick wood veneer
* 355mm high fabric covered tackable privacy panels with perimeter aluminum trim
* Dual channel anodized aluminum accessory rail applied full length to interior
surface of each privacy panel
* 200mm x 75mm extruded aluminum table legs with removable panel for access
* One 460mm wide mobile pedestal with two box drawers, one pencil tray and one
file drawer, locks, dual wheel swivel locking casters
* Mobile pedestal to be steel case with metallic paint finish, laminate drawer fronts
* 10mm thick white translucent glass divider panels with aluminum supports to be
provided between each left and right handed workstation per furniture plans
* Anodized aluminum hanging accessories to include two legal trays, three
bookshelves, one pencil cup and one flower vase per workstation
* Aluminum desktop accessory to include one storage tray per workstation
* Durable polyurethane clear lacquer wood finish
* 750mm x 460mm formed aluminum movable corner desk surface, vinyl fabric
covering, charcoal grey
* 50mm x 100mm plastic grommet at corner of workstation, grey
* Low profile wire management channel below desktop at rear of worksurfaces
* 355mm wide x 9.5mm high aluminum bar door pulls, horizontal orientation
Dimensions: Overall: 1880mm L x 1750mm W x 1100mm H
Finishes: Wood: WD1 Natural Cherry
Aluminum: FIN2 Anodized Aluminum
Metallic Paint: FIN3 Metallic Silver Powdercoat
Laminate: FIN4 Pionite SW826 Angel White
Panel Fabric: UPH2 Maharam Reply 901880/002 Apple
Image: Indicative of required aesthetic only.
Furniture Specification Sheet
Page 16 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE06
Item: Workstation, open office
Location: Refer to Furniture Layout Plans
Illustration shows two workstations with divider panel between left and right handed
workstations.
Components for left and right handed workstations to be determined per
furniture plans.
Requirements for divider panels and tackable privacy panels are to be determined
per arrangement of workstations on furniture plans.
Furniture Specification Sheet
Page 17 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: DE06
Item: Workstation, open office
Illustrations show one left handed and one right handed workstation
Furniture Specification Sheet
Page 18 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF01
Item: Workstation, private office
Performance
Specifications: U-shaped private office one person workstation
* Wood veneer worksurfaces with solid wood edge band
* Wood veneer front modesty panel, fixed storage cabinets and mobile pedestals
* Flat cut book match wood grain veneer typical
* 38mm thick veneer worksurfaces to have square edge detail with mitered and
coped details at intersections, impregnated polycell backer finish
* Durable polyurethane clear lacquer natural wood finish
* One matching solid wood grommet unit in each worksurface section
* Exposed rectangular stainless steel metal leg support at front worksurface
* Fabric covered 20mm thick tackboard, full height and width of back wall to be
attached to wall with concealed Z-clip hangers
* 915mm wide tall storage closet with adjustable shelves on one side and coat rod
on other side
* 760mm wide two door wood fixed pedestal cabinet with one adjustable shelf
* 460mm wide wood mobile pedestal with one box drawer, a pencil tray and one file
drawer each, locking swivel casters
* Drawers to have three stage full extension steel ball bearing slides
* Drawer interiors to have matching veneer and finish as worksurfaces
* Concealed self closing door hinges with 90 degree opening, fully adjustable
* Desktop accessories to include two anodized aluminum storage trays
* 355mm wide x 9.5mm high stainless steel bar door and drawer pulls
* Locks at all storage units
* Adjustable floor glides
Dimensions: Overall: Varies W x 2595mm D x 2170mm H
Finishes: Wood: WD1 Natural Cherry to match Interior WD1
Tackboard Fabric: UPH7 Unika Vaev Rattan 454/95 Driftwood
Metal Trim: FIN5 Satin Stainless Steel
Image: Indicative of required aesthetic only.
WD1
UPH7
Location: Refer to Furniture Location Plans
Furniture Specification Sheet
Page 19 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF01
Item: Workstation, private office
Furniture Specification Sheet
Page 20 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF02
Item: Workstation, private office
Performance
Specifications: U-shaped private office one person workstation
* Laminate worksurfaces with tapered edge detail and clear acrylic edge band
* 32mm thick medium density fiberboard worksurfaces
* Silver metallic modesty panel
* Fabric covered tackable panel with perimeter anodized aluminum trim
* Dual channel anodized aluminum accessory rail applied full length to fabric panel
* 200mm x 75mm extruded aluminum table legs with removable panel for access
* One 460mm wide mobile pedestal with two box drawers, one pencil tray and one
file drawer, locks, dual wheel swivel locking casters
* Mobile pedestal to be steel case with metallic paint finish, laminate drawer fronts
* One 915mm wide fixed undercounter two drawer lateral file pedestal, locks
* Fixed pedestal to be steel case with laminate drawer fronts, metallic paint on
side panels, leveling feet
* One 915mm wide tall storage unit with two lateral file drawers in base and
cabinet above with center divider, three adjustable shelves, one coat bar
* Storage unit to be steel case with laminate cabinet fronts, metallic paint on
side panels, leveling feet
* Anodized aluminum hanging accessories to include two legal trays, three
bookshelves, one pencil cup and one flower vase per workstation
* Aluminum desktop accessory to include one storage tray per workstation
* 750mm x 460mm formed aluminum movable corner desk surface, vinyl fabric
covering, charcoal grey
* 50mm x 100mm plastic grommet at each corner of workstation, grey
* Low profile wire management channel below desktop at rear of worksurfaces
* 355mm wide x 9.5mm high aluminum bar door pulls, horizontal orientation
Dimensions: Overall: 3280mm W x 2720mm D x 2165mm H
Finishes: Aluminum: FIN2 Anodized Aluminum
Metallic Paint: FIN3 Metallic Silver Powdercoat
Laminate: FIN4 White Laminate to match QF control sample
Fabric: UPH7 Unika Vaev Rattan 454/95 Driftwood
Image: Indicative of required aesthetic only.
FIN4
Location: Refer to Furniture Layout Plans UPH7
Furniture Specification Sheet
Page 21 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF02
Item: Workstation, private office
Furniture Specification Sheet
Page 22 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF02
Item: Workstation, private office
Furniture Specification Sheet
Page 23 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF03
Item: Workstation, private office
Performance
Specifications: L-shaped private office one person workstation
* Laminate worksurfaces with tapered edge detail and clear acrylic edge band
* 32mm thick medium density fiberboard worksurfaces
* Fabric covered tackable panel with perimeter anodized aluminum trim to be
attached to wall with concealed Z-clip hangers
* Dual channel anodized aluminum accessory rail applied full length to fabric panel
* 200mm x 75mm extruded aluminum table legs with removable panel for access
* One 460mm wide mobile pedestal with two box drawers, one pencil tray and one
file drawer, locks, dual wheel swivel locking casters
* Mobile pedestal to be steel case with metallic paint finish, laminate drawer fronts
* 750mm x 460mm formed aluminum movable corner desk surface, vinyl fabric
covering, charcoal grey
* 50mm x 100mm plastic grommet at each corner of workstation, grey
* Low profile wire management channel below desktop at rear of worksurfaces
* Anodized aluminum hanging accessories to include two legal trays, three
bookshelves, one pencil cup and one flower vase per workstation
* Aluminum desktop accessory to include one storage tray per workstation
* 355mm wide x 9.5mm high aluminum bar door pulls, horizontal orientation
Dimensions: Overall: 2515mm L x 1830mm W x 1850mm H
Finishes: Aluminum: FIN2 Anodized Aluminum
Metallic Paint: FIN3 Metallic Silver Powdercoat
Laminate: FIN4 White Laminate to match QF control sample
Fabric: UPH7 Unika Vaev Rattan 454/95 Driftwood
Image: Indicative of required aesthetic only.
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 24 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF03
Item: Workstation, private office
FIN4
UPH7
Furniture Specification Sheet
Page 25 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF03
Item: Workstation, private office
Furniture Specification Sheet
Page 26 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF04
Item: Workstation, private office
Performance
Specifications: L-shaped private office one person workstation
* Laminate worksurfaces with tapered edge detail and clear acrylic edge band
* 32mm thick medium density fiberboard worksurfaces with tapered edge detail
* Fabric covered tackable panel with perimeter anodized aluminum trim to be
attached to wall with concealed Z-clip hangers
* Dual channel anodized aluminum accessory rail applied full length to fabric panel
* 200mm x 75mm extruded aluminum table legs with removable panel for access
* One 460mm wide mobile pedestal with two box drawers, one pencil tray and one
file drawer, locks, dual wheel swivel locking casters
* Mobile pedestal to be steel case with metallic paint finish, laminate drawer fronts
* 750mm x 460mm formed aluminum movable corner desk surface, vinyl fabric
covering, charcoal grey
* 50mm x 100mm plastic grommet at each corner of workstation, grey
* Low profile wire management channel below desktop at rear of worksurfaces
* Anodized aluminum hanging accessories to include two legal trays, three
bookshelves, one pencil cup and one flower vase per workstation
* Aluminum desktop accessory to include one storage tray per workstation
* 355mm wide x 9.5mm high aluminum bar door pulls, horizontal orientation
Dimensions: Overall: 2515mm L x 1830mm W x 1850mm H
Finishes: Aluminum: FIN2 Anodized Aluminum
Metallic Paint: FIN3 Metallic Silver Powdercoat
Laminate: FIN4 White Laminate to match QF control sample
Fabric: UPH7 Unika Vaev Rattan 454/95 Driftwood
Image: Indicative of required aesthetic only.
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 27 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF04
Item: Workstation, private office
FIN4
UPH7
Furniture Specification Sheet
Page 28 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF04
Item: Workstation, private office
Furniture Specification Sheet
Page 29 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF05
Item: Workstation, private office
Performance
Specifications: Private office one person workstation
* Laminate worksurface with tapered edge detail and clear acrylic edge band
* 32mm thick medium density fiberboard worksurface
* Fabric covered tackable panel with perimeter anodized aluminum trim to be
attached to wall with concealed Z-clip hangers
* Dual channel anodized aluminum accessory rail applied full length to fabric panel
* 200mm x 75mm extruded aluminum table legs with removable panel for access
* One 460mm wide mobile pedestal with two box drawers, one pencil tray and one
file drawer, locks, dual wheel swivel locking casters
* Mobile pedestal to be steel case with metallic paint finish, laminate drawer fronts
* 50mm x 100mm plastic grommet at each corner of workstation, grey
* Low profile wire management channel below desktop at rear of worksurfaces
* Anodized aluminum hanging accessories to include one legal tray, two
bookshelves, one pencil cup and one flower vase per workstation
* Aluminum desktop accessory to include one storage tray per workstation
* 355mm wide x 9.5mm high aluminum bar door pulls, horizontal orientation
Dimensions: Overall: 1830mm W x 685mm D x 1850mm H
Finishes: Aluminum: FIN2 Anodized Aluminum
Metallic Paint: FIN3 Metallic Silver Powdercoat
Laminate: FIN4 White Laminate to match QF control sample
Fabric: UPH7 Unika Vaev Rattan 454/95 Driftwood
Image: Indicative of required aesthetic only.
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 30 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF05
Item: Workstation, private office
FIN4
UPH7
Furniture Specification Sheet
Page 31 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF05
Item: Workstation, private office
Furniture Specification Sheet
Page 32 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF06
Item: Workstation, executive office
Performance
Specifications: U-shaped private office one person workstation
* Wood veneer worksurfaces with solid wood edge band
* Wood veneer front modesty panel, fixed storage cabinets and mobile pedestal
* Flat cut book match wood grain veneer typical
* 38mm thick veneer worksurfaces to have square edge detail with mitered and
coped details at intersections, impregnated polycell backer finish
* Durable polyurethane clear lacquer at natural wood finish
* One matching solid wood grommet unit in each worksurface section
* Exposed rectangular stainless steel metal leg support at front worksurface
* Fabric covered 20mm thick tackboard, full height and width of back wall to be
attached to wall with concealed Z-clips
* 915mm wide tall storage cabinet with center divider, four adjustable shelves on
one side, fixed shelf and coat rod on other side
* 750mm wide two door wood fixed pedestal cabinet with one adjustable shelf
* 460mm wide wood mobile pedestal with one box drawer, a pencil tray and one file
drawer each, locking swivel casters
* Drawers to have three stage full extension steel ball bearing slides
* Drawer interiors to have matching veneer and finish as worksurfaces
* Concealed self closing door hinges with 90 degree opening, fully adjustable
* Desktop accessories to include two anodized aluminum storage trays
* 355mm wide x 9.5mm high stainless steel bar door and drawer pulls
* Locks at all storage units
* Adjustable floor glides
Dimensions: Overall: 3200mm W x 2595mm D x 2170mm H
Finishes: Wood: WD1 Natural Cherry to match Interiors WD1
Tackboard Fabric: UPH7 Unika Vaev Rattan 454/95 Driftwood
Metal Trim: FIN5 Satin Stainless Steel
Image: Indicative of required aesthetic only.
WD1
UPH7
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 33 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF06
Item: Workstation, executive office
Furniture Specification Sheet
Page 34 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF07
Item: Workstation, administration office
Performance
Specifications: U-shaped private office one person workstation
* Wood veneer worksurfaces with solid wood edge band
* Wood veneer front modesty panel, fixed storage cabinets and mobile pedestals
* Flat cut book match wood grain veneer typical
* 38mm thick veneer worksurfaces to have square edge detail with mitered and
coped details at intersections, impregnated polycell backer finish
* Durable polyurethane clear lacquer at natural wood finish
* One matching solid wood grommet unit in each worksurface section
* Exposed rectangular stainless steel metal leg support at front worksurface
* Fabric covered 20mm thick tackboard, full height and width of back wall
* 760mm wide tall storage cabinet with center divider, four adjustable shelves on
one side, fixed shelf and coat rod on other side
* 610mm wide two door wood fixed pedestal cabinet with one adjustable shelf
* 460mm wide wood mobile pedestal with one box drawer, a pencil tray and one file
drawer each, locking swivel casters
* Drawers to have three stage full extension steel ball bearing slides
* Drawer interiors to have matching veneer and finish as worksurfaces
* Concealed self closing door hinges with 90 degree opening, fully adjustable
* Desktop accessories to include two anodized aluminum storage trays
* 355mm wide x 9.5mm high stainless steel bar door and drawer pulls
* Locks at all storage units
* Adjustable floor glides
Dimensions: Overall: 2800 W x 2595mm D x 2170mm H
Finishes: Wood: WD1 Natural Cherry to match Interiors WD1
Tackboard Fabric: UPH7 Unika Vaev Rattan 454/95 Driftwood
Metal Trim: FIN5 Satin Stainless Steel
Image: Indicative of required aesthetic only.
WD1
UPH7
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 35 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF07
Item: Workstation, administration office
Furniture Specification Sheet
Page 36 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF08
Item: Workstation, executive chef office
Performance
Specifications: L-shaped private office one person workstation
* Wood veneer worksurfaces with solid wood edge band
* Wood veneer front modesty panel and mobile pedestal
* Flat cut book match wood grain veneer typical
* 38mm thick veneer worksurfaces to have square edge detail with mitered and
coped details at intersections, impregnated polycell backer finish
* Durable polyurethane clear lacquer at natural wood finish
* One matching solid wood grommet unit in each worksurface section
* Exposed rectangular stainless steel metal leg support at front worksurface
* 460mm wide wood mobile pedestal with one box drawer, a pencil tray and one file
drawer each, locking swivel casters
* Drawers to have three stage full extension steel ball bearing slides
* Drawer interiors to have matching veneer and finish as worksurfaces
* Desktop accessories to include two anodized aluminum storage trays
* 355mm wide x 9.5mm high stainless steel bar door and drawer pulls
* Locks at all storage units
* Adjustable floor glides
Dimensions: Overall: 1830 W x 2285mm D x 760mm H
Finishes: Wood: WD1 Natural Cherry to match Interiors WD1
Metal Trim: FIN5 Satin Stainless Steel
Image: Indicative of required aesthetic only.
WD1
Location: Refer to Furniture Layout Plans
Furniture Specification Sheet
Page 37 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Tag: OF08
Item: Workstation, executive chef office
Office OF08 is similar to Office OF07 without the back wall
Furniture Specification Sheet
Page 38 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3
Furniture and Equipment Specifications
EC BP4A(EB)-3 - Convention Centre Extension
Qatar Foundation Education City
Furniture Specification Sheet
Page 39 of 39 / T0XC08100300/FF&E
QP PROJECT NO. 1875, BP#4A-(EB)-3