pack...Pack 12 Stage 46 The electronic control unit Stage 47 Connecting the wires and testing the...
Transcript of pack...Pack 12 Stage 46 The electronic control unit Stage 47 Connecting the wires and testing the...
1212packpack
Pack 12
Stage 46
The electronic control unitStage 47
Connecting the wires and testing the lightsStage 48
Attaching the wires to the chassisStage 49
Installing the gear leverStage 50
Assembling the fire extinguisher
Editorial by: Milanoedit srl, milanoedit.com Translation by: TperTradurre
Picture credits: NBCUniversal Archive
©️ 2019 Universal City Studios LLC. Fast & Furious and all related marks and characters are trademarks and copyrights of Universal Studios.All Rights Reserved.
Dodge, HEMI and related logos, vehicle model names and trade dress are trademarks of FCA US LLC and used under license by Premium and Collectibles Trading Co. Ltd. ©2019 FCA US LLC.
©️ 2019 Editorial Planeta DeAgostini S.A.U. Todos los derechos reservados.
©️ 2019 De Agostini Publishing Italia S.p.A. Tutti i diritti riservati.
Warning: Not suitable for children under the age of 14.
This product is not a toy and is not designed or intended for use in play.
Items may vary from those shown.
STAGESTAGE
181
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience. Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
46A
46D
46B
46C
DM
Publi
sher
Not
e: th
e app
eara
nce o
f the
par
ts sh
own
on th
ese p
ages
may
diff
er fr
om th
at of
the p
ieces
inclu
ded
in th
is pa
ck.
This
in n
o way
affe
cts t
he q
ualit
y or a
ssem
bly i
nstru
ction
s.
PIECES FOR THIS STAGE
In this assembly session you will attach the electronic control unit to your model car. The unit controls the lights and sound effects.
46A Electronic control unit46B Wiring and switch for sound effects of horn and engine46C Wiring and switch for the lights46D Dashboard lights with wiring
DM Screws 1.7×3x5 mm (x 5)*
* Some of the parts are spares.
ELECTRONIC CONTROL UNIT
THE ELECTRONIC THE ELECTRONIC CONTROL UNITCONTROL UNIT
4646
182
46A
30A
DM
46C
46B
46A
46D
1F
1G
1H
46.1 Insert the connector on the wiring for the sound effects 46B into socket 1F of the electronic control unit 46A; the connector on the wiring for the lights
46C into socket 1G; and the wiring of the dashboard lights 46D into socket 1H.
46.2 WIth the electronic control unit 46A facing the same way as in the illustration, put it on the four pins
located on the left side of the middle section of the chassis 30A. Secure with four type DM screws.
STAGE 46STAGE 46
183
43B
44A
*Batteries not included
44A
45B
46A
1E
1D
46.4 test the sound. Insert three AAA* batteries into the battery holder and switch on.
46.3 Insert the connector on the wire of the speaker 45B into socket 1E in the control unit. Then, connect the wire of the battery
holder to socket 1D.
STAGE 46STAGE 46
184
STAGE 46 FINAL RESULT
You have now attached the electronic control unit to the chassis, and connected the first set of wires.
46.5 Press the switch on the wiring for the sound effects 46B once. The speaker 45B should reproduce the sound of the horn. Press switch 46B again, and you should hear the sound of the engine. To stop the sound, press the switch again. Use the
switch on the battery holder 44A to turn the system off.
45B
46B
STAGE 46STAGE 46
STAGESTAGE
185
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience. Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
Publi
sher
Not
e: th
e app
eara
nce o
f the
par
ts sh
own
on th
ese p
ages
may
diff
er fr
om th
at of
the p
ieces
inclu
ded
in th
is pa
ck.
This
in n
o way
affe
cts t
he q
ualit
y or a
ssem
bly i
nstru
ction
s.
PIECES FOR THIS STAGE
In this assembly session you will connect the wires of the brake light, headlights and rear lights to the control unit. You will then perform a simple test to check that the lights work properly.
CONNECTING THE CONNECTING THE WIRES AND TESTING WIRES AND TESTING THE LIGHTSTHE LIGHTS
47A Wiring and switch for the brake light47B Wiring for the LED headlights 47C Wiring for the LED rear lights
47D Type A wire grommet (x 3)47E Type B wire grommet (x 3)47F Stands for the chassis (x 4)
CM Screws 1.7×3 mm (x 14)*
* Some of the parts are spares.
ELECTRONIC CONTROL UNIT
4747
47A
47B
47C
47D
47E
CM
47F
186
47C
46A
47A
47B
1C
1A1B
44A
STAGE 47STAGE 47
47.2 noW, you are going to check if the lights work properly. Turn on the switch on the battery holder
44A.
47.1 ConneCt the connector on the wiring for the brake light 47A to socket 1B in the electronic control unit 46A; the connector of the wiring for the headlights 47B to socket 1A, and that of the rear lights 47C to socket 1C.
187
47C
47B
46D
46C
47B
47A
STAGE 47STAGE 47
47.3 Press the switch on the wiring 46C to turn on the rear lights 47C, the headlights 47B, and the dashboard lights 46D.
47.4 Press the switch on the wiring for the brake light 47A to increase the intensity of the rear lights 47C
(or to switch them on if the switch on the lights 46C is turned off).
188
STAGE 47STAGE 47
STAGE 47 FINAL RESULT
You have now finished wiring the lights of your model car, and have checked that they work.
47.5 onCe you have finished testing the model car’s electronic functions, turn off the switch on the battery holder 44A and remove the battery holder cover 43B
and the three AAA batteries. 43B
44A
A USEFUL TIPAt the end of this session, put the chassis on the supplied stands to prevent the tyres from deforming.
STAGESTAGE
189
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience. Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
48A
48B
Publi
sher
Not
e: th
e app
eara
nce o
f the
par
ts sh
own
on th
ese p
ages
may
diff
er fr
om th
at of
the p
ieces
inclu
ded
in th
is pa
ck.
This
in n
o way
affe
cts t
he q
ualit
y or a
ssem
bly i
nstru
ction
s.
PIECES FOR THIS STAGE
In this assembly session you will attach the wires to the chassis. You will also attach four hooks to the floor pan. Follow our instructions carefully, using the illustrations to help you.
ATTACHING THE ATTACHING THE WIRES TO THE CHASSISWIRES TO THE CHASSIS
48A Floor pan48B Hooks (x 4)
* Some of the parts are spares.
FLOOR PAN
4848
190
31A
47D
30A
47D
47D
CMCM
CM
30A
31A
47C
44A47C
48.1 Pass the wire for the rear lights 47C between the three pairs of linchpins located on the middle and rear sections of the chassis (30A and 31A). Also, insert the wire for the battery holder 44A between the first two pairs of linchpins, those on the middle section of the chassis.
48.2 Get the wire grommets and screws that came with session 47. Slide the three type A wire
grommets 47D onto the pairs of linchpins on the middle and rear sections of the chassis (30A and 31A). Secure each wire grommet with two type CM screws.
STAGE 48STAGE 48
191
21A
47E47E47E
CM CMCM
21A47A
46B
46C
46D
47B
48.4 to attaCh this group of wires to the chassis, slide the three type B wire grommets 47E onto the
pairs of linchpins on the front platform 21A. Secure each wire grommet with two type CM screws.
48.3 GrouP together the following wires between the pairs of linchpins on the front platform 21A: those of the switch for the horn and engine sound
effects 46B; those of the front headlights 47B; those of the brake light switch 47A; those of the lights 46C; and, finally, those of the dashboard lights 46D.
STAGE 48STAGE 48
192
48B
48A
STAGE 48 FINAL RESULT
48A
48B
You have now attached the wiring for the electrical system to the chassis, and the four hooks to the floor pan.
48.5 Insert two of the hooks 48B into the two holes on the floor pan 48A, next to the central tunnel.
48.6 Insert the remaining two hooks 48B into the holes on the other side of
the tunnel.
STAGE 48STAGE 48
STAGESTAGE
193
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience. Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
49A 49B
49E
49C 49D
AP
Publi
sher
Not
e: th
e app
eara
nce o
f the
par
ts sh
own
on th
ese p
ages
may
diff
er fr
om th
at of
the p
ieces
inclu
ded
in th
is pa
ck.
This
in n
o way
affe
cts t
he q
ualit
y or a
ssem
bly i
nstru
ction
s.
PIECES FOR THIS STAGE
In this assembly session you will connect the wires of the brake light, headlights, and rear lights to the electronic control unit. You will then perform a simple test to check that the lights work properly.
INSTALLING THE INSTALLING THE GEAR LEVERGEAR LEVER
49A Gear lever49B Gear knob49C Shift rail49D Centre console
49E Middle section of the transmission tunnelAP Screws 1.7×4 mm (x 8)*
* Some of the parts are spares.
GEAR LEVER
4949
194
49C
49D
AP
49A
49D
49C
49B
STAGE 49STAGE 49
49.1 PlaCe the shift rail 49C on the centre console 49D, and join the two components together using two type AP screws.
49.2 Insert the thinner end of the gear lever 49A into the corresponding housing in the centre console 49D, ensuring that the ball at the opposite end fits
into its housing. Then put the gear knob 49B onto the gear lever.
195
49.4 JoIn the floor pan and the middle section of the transmission tunnel 49E, by inserting the two tabs into the corresponding slots.
49.3 attaCh the piece you have just assembled to the middle of the floor pan 48A, ensuring it faces the same way as in the illustration. Secure
the centre console 49D to the floor pan with two type AP screws.
49D
48A
AP
48A
49E
STAGE 49STAGE 49
196
49.5 turn the floor pan over and attach it to the middle section of the transmission tunnel 49E using two type AP screws.
STAGE 49 FINAL RESULT You have now installed the gear lever and the middle section of the transmission tunnel on the floor pan.
48A
49E
AP
AP
STAGE 49STAGE 49
STAGESTAGE
197
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience. Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
50A
50D 50E
50B50C
AP
Publi
sher
Not
e: th
e app
eara
nce o
f the
par
ts sh
own
on th
ese p
ages
may
diff
er fr
om th
at of
the p
ieces
inclu
ded
in th
is pa
ck.
This
in n
o way
affe
cts t
he q
ualit
y or a
ssem
bly i
nstru
ction
s.
PIECES FOR THIS STAGE
In this assembly session you will assemble the fire extinguisher and attach it to the floor pan. Follow our instructions very carefully, using the illustrations to help you.
ASSEMBLING THE ASSEMBLING THE FIRE EXTINGUISHER FIRE EXTINGUISHER
50A Fire extinguisher stand50B Fire extinguisher (front)50C Fire extinguisher (back)50D Pressure gauge
50E Brackets (x 2)AP Screws 1.7×4 mm (x 10)*
* Some of the parts are spares.
sERbAtOiO E ALtOPARLANtEFiRE EXtiNGUisHER
5050
198
50D
50B
50B
50C
AP
50.1 JoIn the front and back of the fire extinguisher 50B and 50C together. Secure them with two type AP screws.
50.2 Press the pressure gauge 50D into the hole in the front of the fire extinguisher 50B.
STAGE 50STAGE 50
199
50A
48A
49E
50C
50A
48A
AP
50.3 Get the floor pan 48A you were working on at the end of the last assembly session. Attach the fire extinguisher stand 50A to the middle section of the transmission tunnel 49E, ensuring it faces the same way as in the illustration.
50.4 Mount the fire extinguisher on the base 50A, so that the two linchpins on the back of the fire extinguisher 50C fit
into the corresponding holes. Secure the components with two type AP screws, inserting them from underneath the floor pan 48A.
STAGE 50STAGE 50
200
AP AP
50E50E
48A
50.5 alIGn the two brackets 50E with the corresponding holes in the right side of the floor pan 48A, next to the hooks that you
mounted in assembly session 47. Secure each of the two brackets with two type AP screws.
STAGE 50 FINAL RESULT You have now attached the two brackets and the fire extinguisher and its base to the floor pan.
STAGE 50STAGE 50