PA 100 - 101 - 200 Adaptadores de Parqueo Brazos Bottom Loading
4
THIS IS CONFIDENTIAL INFORMATION. THIS DRAWING AND DESIGN IS THE PROPERTY OF LIQUIP INTERNATIONAL PTY LIMITED. IT MUST NOT BE COPIED OR REPRODUCED IN ANY WAY WHATSOEVER AND/OR PASSED ON TO ANY THIRD PARTY WITHOUT WRITTEN AUTHORITY. LIQUIP INTERNATIONAL PTY LIMITED - ENGINEERING DEPARTMENT - 13 HUME RD SMITHFIELD SYDNEY NSW AUSTRALIA 2164 PH: +61 2 9725 9000 FAX: +61 2 9609 4739 EMAIL: [email protected] PRODUCT-INFO\LOAD\8-SALES\API_PARKING_ADAPTORS_API00400.doc Issue: D 19/5/04 Page 1 Liquip API Parking Adaptors DATA SHEET PART N°: APIPA PA100 PA101 PA200 TITLE: Parking adaptors for API couplers. PURPOSE: To ensure bottom loading arms are correctly s towed and secured. Some can also be used to collect drips and pipe them away to a drain system. OPERATION: The bottom loading coupler is coupled and an integral proximity sensor (supplied separately) is actuated to enable system interlocks. All adaptors have stops to ensure coupler can not be opened whilst parked. DISMANTLE: Remove back plate and the nylon setscrew if dismantling to access proximity sensor is necessary. ADJ USTMENT OR SERVICE: Periodically grease sliding proximity switch (where supplied) by using grease nipple visible from face of nosecone. VARIANTS: APIPA – Parking adaptor c/w provision for proximity sensor (available in straight and 15° angled) PA100 – Parking adaptor, free standing, no provision for proximity sensor PA101 – Parking adaptor, free standing c/w provision for proximity sensor PA200 – Parking adaptor, no proximity sensor, stop bar only MATERIALS OF CONSTRUCTION: Nosecone - Aluminium Back plate - Aluminium Spring - Stainless steel Slider - Acetal Stand - Galvanised steel MOUNTING: APIPA & PA200 bolt onto bracket supplied by customer PA100 & PA101 are free standing (bolt to concrete or skid floor) WEIGHT: APIPA – 2kg PA100 & PA101 - 16kg PA200 – 1.4kg ASSOCIA TED EQUIPMENT: API513 & API700 Dry-break couplers VCFPA Vapour coupler parking adaptor with proximity switch mounting VCM3 Vapour hose parking adaptor with no interlock API401-2P Coupler parking adaptor with no interlock Overall dimensions shown on the drawings overleaf.
-
Upload
javierfox98 -
Category
Documents
-
view
217 -
download
0
Transcript of PA 100 - 101 - 200 Adaptadores de Parqueo Brazos Bottom Loading
7/22/2019 PA 100 - 101 - 200 Adaptadores de Parqueo Brazos Bottom Loading
http://slidepdf.com/reader/full/pa-100-101-200-adaptadores-de-parqueo-brazos-bottom-loading 1/4
THIS IS CONFIDENTIAL INFORMATION.
THIS DRAWING AND DESIGN IS THE PROPERTY OF LIQUIP INTERNATIONAL PTY LIMITED.
IT MUST NOT BE COPIED OR REPRODUCED IN ANY WAY WHATSOEVER AND/OR PASSED ON
TO ANY THIRD PARTY WITHOUT WRITTEN AUTHORITY.
LIQUIP INTERNATIONAL PTY LIMITED - ENGINEERING DEPARTMENT - 13 HUME RD SMITHFIELD SYDNEY NSW AUSTRALIA 2164PH: +61 2 9725 9000 FAX: +61 2 9609 4739 EMAIL: [email protected]
PRODUCT-INFO\LOAD\8-SALES\API_PARKING_ADAPTORS_API00400.doc Issue: D 19/5/04 Page 1
Liquip API Parking Adaptors
DATA SHEET PART N°: APIPAPA100PA101PA200
TITLE: Parking adaptors for API couplers.
PURPOSE: To ensure bottom loading arms are correctly stowed and secured. Some can also be usedto collect drips and pipe them away to a drain system.
OPERATION: The bottom loading coupler is coupled and an integral proximity sensor (supplied separately)
is actuated to enable system interlocks. All adaptors have stops to ensure coupler can notbe opened whilst parked.
DISMANTLE: Remove back plate and the nylon setscrew if dismantling to access proximity sensor isnecessary.
ADJUSTMENTOR SERVICE: Periodically grease sliding proximity switch (where supplied) by using grease nipple visible
from face of nosecone.
VARIANTS: APIPA – Parking adaptor c/w provision for proximity sensor (available in straight and 15°angled)PA100 – Parking adaptor, free standing, no provision for proximity sensorPA101 – Parking adaptor, free standing c/w provision for proximity sensorPA200 – Parking adaptor, no proximity sensor, stop bar only
MATERIALS OFCONSTRUCTION: Nosecone - Aluminium
Back plate - AluminiumSpring - Stainless steelSlider - AcetalStand - Galvanised steel
MOUNTING: APIPA & PA200 bolt onto bracket supplied by customerPA100 & PA101 are free standing (bolt to concrete or skid floor)
WEIGHT: APIPA – 2kgPA100 & PA101 - 16kgPA200 – 1.4kg
ASSOCIATEDEQUIPMENT: API513 & API700 Dry-break couplers
VCFPA Vapour coupler parking adaptor with proximity switch mounting
VCM3 Vapour hose parking adaptor with no interlock API401-2P Coupler parking adaptor with no interlock
Overall dimensions shown on the drawings overleaf.
7/22/2019 PA 100 - 101 - 200 Adaptadores de Parqueo Brazos Bottom Loading
http://slidepdf.com/reader/full/pa-100-101-200-adaptadores-de-parqueo-brazos-bottom-loading 2/4
THIS IS CONFIDENTIAL INFORMATION.
THIS DRAWING AND DESIGN IS THE PROPERTY OF LIQUIP INTERNATIONAL PTY LIMITED.
IT MUST NOT BE COPIED OR REPRODUCED IN ANY WAY WHATSOEVER AND/OR PASSED ON
TO ANY THIRD PARTY WITHOUT WRITTEN AUTHORITY.
LIQUIP INTERNATIONAL PTY LIMITED - ENGINEERING DEPARTMENT - 13 HUME RD SMITHFIELD SYDNEY NSW AUSTRALIA 2164PH: +61 2 9725 9000 FAX: +61 2 9609 4739 EMAIL: [email protected]
PRODUCT-INFO\LOAD\8-SALES\API_PARKING_ADAPTORS_API00400.doc Issue: D 19/5/04 Page 2
7/22/2019 PA 100 - 101 - 200 Adaptadores de Parqueo Brazos Bottom Loading
http://slidepdf.com/reader/full/pa-100-101-200-adaptadores-de-parqueo-brazos-bottom-loading 3/4
THIS IS CONFIDENTIAL INFORMATION.
THIS DRAWING AND DESIGN IS THE PROPERTY OF LIQUIP INTERNATIONAL PTY LIMITED.
IT MUST NOT BE COPIED OR REPRODUCED IN ANY WAY WHATSOEVER AND/OR PASSED ON
TO ANY THIRD PARTY WITHOUT WRITTEN AUTHORITY.
LIQUIP INTERNATIONAL PTY LIMITED - ENGINEERING DEPARTMENT - 13 HUME RD SMITHFIELD SYDNEY NSW AUSTRALIA 2164PH: +61 2 9725 9000 FAX: +61 2 9609 4739 EMAIL: [email protected]
PRODUCT-INFO\LOAD\8-SALES\API_PARKING_ADAPTORS_API00400.doc Issue: D 19/5/04 Page 3
7/22/2019 PA 100 - 101 - 200 Adaptadores de Parqueo Brazos Bottom Loading
http://slidepdf.com/reader/full/pa-100-101-200-adaptadores-de-parqueo-brazos-bottom-loading 4/4
THIS IS CONFIDENTIAL INFORMATION.
THIS DRAWING AND DESIGN IS THE PROPERTY OF LIQUIP INTERNATIONAL PTY LIMITED.
IT MUST NOT BE COPIED OR REPRODUCED IN ANY WAY WHATSOEVER AND/OR PASSED ON
TO ANY THIRD PARTY WITHOUT WRITTEN AUTHORITY.
LIQUIP INTERNATIONAL PTY LIMITED - ENGINEERING DEPARTMENT - 13 HUME RD SMITHFIELD SYDNEY NSW AUSTRALIA 2164PH: +61 2 9725 9000 FAX: +61 2 9609 4739 EMAIL: [email protected]
PRODUCT-INFO\LOAD\8-SALES\API_PARKING_ADAPTORS_API00400.doc Issue: D 19/5/04 Page 4
