P N : t : N IK10 PLUS HIGH LUMEN SERIES/Lumens/IK10+L 8-2'.pdf · LUX dynamics 1350 Capital Blvd...
3
IK10 PLUS HIGH LUMEN SERIES HIGH-BAY LED LUMINAIRE SPECIALIZING IN HIGH-ABUSE APPLICATIONS. INTENDED FOR GYMNASIUMS, NATATORIUMS, MANUFACTURING AND INDUSTRIAL FACILITIES, WAREHOUSES, CONVENTION CENTERS AND OTHER HIGH-CEILING APPLICATIONS. CUSTOMIZED DISTRIBUTIONS ARE AVAILABLE WIDE 120° BEAM ANGLE FOR MAXIMUM UNIFORMITY DIFFUSE LENSING AVAILABLE IN CLEAR AND WHITE OPTICS: EXCEEDS IMPACT RATING OF IK10 EXTRUDED ALUMINUM CONSTRUCTION STAINLESS STEEL HARDWARE MECHANICAL: ISOLATED DRIVER CHANNELS THERMALLY INDEPENDENT HEAT SINK LED BARS ANODIZED BRIGHT DIP FOR CORROSION RESISTANCE AMBIENT TEMPERATURE RATING: -40°F TO 150°F,N-40°C TO 65.5°C HIGH-OUTPUT SAMSUNG LED CHIPS HIGH-TEMP OSRAM DRIVERS COMPONENTS: PERFORMANCE: AIRCRAFT CABLE SUSPENSION SURFACE MOUNTING RIGID PENDANT INSTALLATION: 24”L X (42-48)”W X 2.5”H FIXTURE DIMENSIONS: 25-28LBS SEE ASSEMBLY CONFIGURATION CONTROLS EMERGENCY BACKUP CHANNEL ACCESS BAR AIMING FINISH MOUNTING CUSTOM FIXTURE OUTPUT LUX dynamics 1350 Capital Blvd, Reno, NV 89502 Phone: 775.200.0707 Fax: 775.313.0888 www.luxdynamics.com OUTPUT L- HIGH LUMEN ELECTRONIC CHANNELS MODULE HO3 HIGH OUTPUT GEN. 3 MFR LUX SERIES IK10P IK10+ VOLTAGE DIMMING 120-277V U10 10% dim U1 1% dim UX no dimming 347-480V H10 10% dim H1 1% dim HX no dimming NARROW OPTICS NRW SECONDARY NARROW OPTIC MAY BE USED ON SOME OR ALL BARS OF FIXTURE. I F MIXED DISTRIBUTION IS REQUIRED, PLEASE COORDINATE WITH FACTORY TO SPECIFY LENGTH 2’ ASSEMBLY CONFIG. A B C D E F G PLACEMENT OF BARS/ CHANNELS IN FIXTURE BODY. SEE BELOW FOR OPTIONS. CRI CCT 850 840 835 830 NUMBER OF BARS LENS NL CA2 WA2 CP2 WP2 CORD 3/10 4/10 5/10 6/10 WIRES 3 TO6 LENGTH 10’,15’ 20’,30’ PROJECT NAME: NOTES: TYPE: DLH DAYLIGHT SENSOR OCC OCCUPANCY SENSOR D/O DAYLIGHT AND OCCUPANCY WCM WIRELESS CONTROL EM10 10W BATTERY EM15 15W BATTERY TOP BOT DIR 0°NADIR IND 180°NADIR CLD CUSTOM LIGHT DISTRIBUTION COORDINATE WITH FACTORY FOR ALL CLD ORDERS. STND MFHB CC CABLE: H10-18Y H10-18Y T H4P10 H4P10SS PENDANT: MH1P MH2P SPM SURFACE: SM UH2 UH4 SEE MOUNTING DETAILS (PG2) FOR AVAILABLE OPTIONS PLEASE NOTE DELIVERED LUMENS ABOVE OPTIONAL POLYCARBONATE OR ACRYLIC LENSES LUX -TRIPLE -QUAD 8 T Q 2’ END CAP CHANNEL LID HANGING BRACKETS BAR (NO LENS) - NOMINAL, NO LIGHT LOSS (CLEAR ACRYLIC) - 9% LIGHT LOSS (WHITE/FROSTED ACRYLIC) - 16% LIGHT LOSS (CLEAR POLYCARBONATE) - 14% LIGHT LOSS (WHITE/FROSTED POLYCARBONATE) - 22% LIGHT LOSS LENS PERFORMANCE DATA 5000K - STANDARD/NOMINAL 4000K - 4% LIGHT LOSS 3500K - 6% LIGHT LOSS 3000K - 8% LIGHT LOSS OTHER CCT AVAILABLE, CONTACT FACTORY CCT PERFORMANCE DATA CRI PERFORMANCE DATA 80 CRI - STANDARD/NOMINAL 90 CRI - 6% LIGHT LOSS OTHER CRI AVAILABLE, CONTACT FACTORY NL CAX WAX CPX WPX CHANNEL AND ASSEMBLY CONFIGURATION: TA TB TC QA QC QE STND-STANDARD: -LUX GREEN HANGING BRACKETS -BRIGHT DIP ANODIZED EXTRUSIONS -QULIFIES AS NATATORIUM RATED -IF INSTALLED IN A NATATORIUM, LUX RECOMMENDS STAINLESS STEEL MOUNTS. MFHB-HANGING BRACKETS: -MILL FINISH HANGING BRACKETS -BRIGHT DIP ANODIZED EXTRUSIONS CC-CUSTOM COLOR: -2MIL NATATORIUM-GRADE POWDERCOATED COMPONENTS IN ANY COLOR. -PLEASE SPECIFY RAL NUMBER AND COMPONENTS TO BE FINISHED WHEN ORDERING. FIXTURE “FINISH” DETAILS CORD DATA 3 WIRE - SINGLE LEG ON/OFF SWITCH 4 WIRE - DUAL LEG SWITCH, OR SINGLE SWITCH WITH EMERGENCY BATTERY 5 WIRE - SINGLE LEG SWITCH WITH DIMMING 6 WIRE - DUAL LEG SWITCH WITH DIMMING OR SINGLE SWITCH WITH EMERGENCY BATTERY CHANNEL ACCESS TOP - FIXTURE CHANNEL ACCESSIBLE FROM ABOVE, NOT AVAILABLE ON SURFACE MOUNTS. BOTTOM - FIXTURE CHANNEL ACCESSIBLE FROM BELOW. MODIFIED/CUSTOM MOUNTS AVAILABLE, CONTACT FACTORY OPTIONAL NARROW REFLECTOR FOR AISLE APPLICATIONS APPLI- CATION ARCH AFH GEN GYM HNG ICE MFG NAT TC WHS 96,798 NOMINAL LUMENS (5000K, NO LENS) 655 WATTS 148 LUMENS PER WATT TM-21: L 70 >54,000 HOURS CALCULATED L 70 >134,000 HOURS Revised 8.22.18 CUSTOM CONFIGURATION AVAILABLE, CONTACT FACTORY APPLICATION TYPE: - ARCHITECTURAL - ARENA/FIELDHOUSE - GENERAL - GYMNASIUM - HANGER - ICE RINK - MANUFACTURING - NATATORIUM - TENNIS COURT - WAREHOUSE ARCH AFH GEN GYM HNG ICE MFG NAT TC WHS L 8 42”W, 25LBS 42”W, 25LBS 42”W, 25LBS 48”W, 28LBS 48”W, 28LBS 48”W, 28LBS ELECTRICAL: 10-YEAR WARRANTY ON FIXTURE BODY WARRANTY: 5-YEAR WARRANTY ON ELECTRONICS 120-277VAC STANDARD / 347-480VAC OPTIONAL FOR SPECIAL REQUESTS, CONTACT FACTORY LISTINGS: ARRA COMPLIANT (MADE IN AMERICA) UL 1598 FOR DRY, DAMP, WET, AND CANOPY LOCATIONS 0-10V, 10% DIMMING DRIVERS STANDARD
Transcript of P N : t : N IK10 PLUS HIGH LUMEN SERIES/Lumens/IK10+L 8-2'.pdf · LUX dynamics 1350 Capital Blvd...
IK10 PLUS HIGH LUMEN SERIESHIGH-BAY LED LUMINAIRE SPECIALIZING IN HIGH-ABUSE APPLICATIONS. INTENDED FOR GYMNASIUMS, NATATORIUMS, MANUFACTURING AND INDUSTRIAL
FACILITIES, WAREHOUSES, CONVENTION CENTERS AND OTHER HIGH-CEILING APPLICATIONS.
CUSTOMIZED DISTRIBUTIONS ARE AVAILABLE
WIDE 120° BEAM ANGLE FOR MAXIMUM UNIFORMITY
DIFFUSE LENSING AVAILABLE IN CLEAR AND WHITE
OPTICS:
EXCEEDS IMPACT RATING OF IK10EXTRUDED ALUMINUM CONSTRUCTION
STAINLESS STEEL HARDWARE
MECHANICAL:
ISOLATED DRIVER CHANNELS
THERMALLY INDEPENDENT HEAT SINK LED BARS
ANODIZED BRIGHT DIP FOR CORROSION RESISTANCE
AMBIENT TEMPERATURE RATING:-40°F TO 150°F,N-40°C TO 65.5°C
HIGH-OUTPUT SAMSUNG LED CHIPS
HIGH-TEMP OSRAM DRIVERS
COMPONENTS:
PERFORMANCE:
AIRCRAFT CABLE SUSPENSION
SURFACE MOUNTING
RIGID PENDANT
INSTALLATION: 24”L X (42-48)”W X 2.5”H FIXTURE DIMENSIONS:
25-28LBS SEE ASSEMBLY CONFIGURATION
CONTROLSEMERGENCY
BACKUP
CHANNEL
ACCESSBAR
AIMINGFINISH MOUNTING
CUSTOM
FIXTURE
OUTPUT
LUX dynamics 1350 Capital Blvd, Reno, NV 89502 Phone: 775.200.0707 Fax: 775.313.0888 www.luxdynamics.com
OUTPUT
L- HIGH LUMEN
ELECTRONIC
CHANNELSMODULE
HO3
HIGH
OUTPUT
GEN. 3
MFR
LUX
SERIES
IK10P
IK10+
VOLTAGE
DIMMING
120-277VU1010% dim
U11% dim
UXno dimming
347-480VH1010% dim
H11% dim
HXno dimming
NARROW
OPTICS
NRWSECONDARY
NARROW
OPTIC MAY
BE USED
ON SOME OR
ALL BARS OF
FIXTURE.IF MIXED
DISTRIBUTION
IS REQUIRED,PLEASE
COORDINATE
WITH
FACTORY
TO SPECIFY
LENGTH
2’
ASSEMBLY
CONFIG.
ABCDEFG
PLACEMENT OF BARS/CHANNELSIN FIXTURE BODY.SEE BELOWFOROPTIONS.
CRI
CCT
850840835830
NUMBER
OF BARSLENS
NLCA2WA2 CP2WP2
CORD
3/104/105/106/10
WIRES 3 TO 6 LENGTH 10’,15’ 20’,30’
PROJECT NAME: NOTES:TYPE:
DLH DAYLIGHT
SENSOR
OCCOCCUPANCY
SENSOR
D/O DAYLIGHT
AND
OCCUPANCY
WCMWIRELESS
CONTROL
E M 1 0 10W
BATTERY
E M 1 5 15W
BATTERY
TOPBOT
DIR0°NADIR
IND180°NADIR
CLD CUSTOM LIGHT
DISTRIBUTION
COORDINATE WITH FACTORY FOR ALL CLD ORDERS.
STNDMFHBCC
CABLE: H10-18Y H10-18Y T H4P10 H4P10SSPENDANT: MH1P MH2P SPMSURFACE: SM UH2 UH4
SEE MOUNTING DETAILS (PG2)
FOR AVAILABLEOPTIONS
PLEASE
NOTE
DELIVERED
LUMENS
ABOVE
OPTIONAL POLYCARBONATE OR ACRYLIC LENSES
LUX -TRIPLE
-QUAD
8 TQ
2’
END CAP
CHANNEL
LID
HANGING
BRACKETS
BAR
(NO LENS) - NOMINAL, NO LIGHT LOSS(CLEAR ACRYLIC) - 9% LIGHT LOSS(WHITE/FROSTED ACRYLIC) - 16% LIGHT LOSS(CLEAR POLYCARBONATE) - 14% LIGHT LOSS
(WHITE/FROSTED POLYCARBONATE) - 22% LIGHT LOSS
LENS PERFORMANCE DATA
5000K - STANDARD/NOMINAL4000K - 4% LIGHT LOSS3500K - 6% LIGHT LOSS3000K - 8% LIGHT LOSSOTHER CCT AVAILABLE,CONTACT FACTORY
CCT PERFORMANCE DATA
CRI PERFORMANCE DATA80 CRI - STANDARD/NOMINAL90 CRI - 6% LIGHT LOSSOTHER CRI AVAILABLE, CONTACT FACTORY
NLCAXWAXCPX
WPX
CHANNEL AND ASSEMBLY CONFIGURATION: TATBTCQAQCQE
STND-STANDARD:-LUX GREEN HANGING BRACKETS-BRIGHT DIP ANODIZED EXTRUSIONS-QULIFIES AS NATATORIUM RATED-IF INSTALLED IN A NATATORIUM,LUX RECOMMENDS STAINLESS STEELMOUNTS.
MFHB-HANGING BRACKETS:-MILL FINISH HANGING BRACKETS-BRIGHT DIP ANODIZED EXTRUSIONS
CC-CUSTOM COLOR:-2MIL NATATORIUM-GRADEPOWDERCOATED COMPONENTSIN ANY COLOR.-PLEASE SPECIFY RAL NUMBER ANDCOMPONENTS TO BE FINISHED WHENORDERING.
FIXTURE “FINISH” DETAILS
CORD DATA3 WIRE - SINGLE LEG ON/OFF SWITCH 4 WIRE - DUAL LEG SWITCH, OR SINGLE
SWITCH WITH EMERGENCY BATTERY5 WIRE - SINGLE LEG SWITCH WITH DIMMING6 WIRE - DUAL LEG SWITCH WITH DIMMING OR
SINGLE SWITCH WITH EMERGENCY BATTERY
CHANNEL ACCESSTOP - FIXTURE CHANNEL ACCESSIBLE FROM ABOVE, NOT AVAILABLE ON SURFACE MOUNTS.BOTTOM - FIXTURE CHANNEL ACCESSIBLE FROM BELOW.
MODIFIED/CUSTOM MOUNTS AVAILABLE, CONTACT FACTORY
OPTIONAL NARROW REFLECTOR FOR AISLE APPLICATIONS
APPLI-CATION
ARCHAFHGENGYMHNGICEMFGNATTCWHS
96,798 NOMINAL LUMENS (5000K, NO LENS) 655 WATTS
148 LUMENS PER WATT
TM-21: L70 >54,000 HOURS
CALCULATED L70 >134,000 HOURS
Revised 8.22.18
CUSTOM CONFIGURATION AVAILABLE, CONTACT FACTORY
APPLICATION TYPE:- ARCHITECTURAL
- ARENA/FIELDHOUSE
- GENERAL
- GYMNASIUM
- HANGER
- ICE RINK
- MANUFACTURING
- NATATORIUM
- TENNIS COURT
- WAREHOUSE
ARCHAFHGENGYMHNGICEMFGNATTCWHS
L 8
42”W, 25LBS
42”W, 25LBS
42”W, 25LBS
48”W, 28LBS
48”W, 28LBS
48”W, 28LBS
ELECTRICAL:
10-YEAR WARRANTY ON FIXTURE BODY
WARRANTY:
5-YEAR WARRANTY ON ELECTRONICS
120-277VAC STANDARD / 347-480VAC OPTIONAL
FOR SPECIAL REQUESTS, CONTACT FACTORY
LISTINGS:ARRA COMPLIANT (MADE IN AMERICA)UL 1598 FOR DRY, DAMP, WET, AND CANOPY LOCATIONS
0-10V, 10% DIMMING DRIVERS STANDARD
LUX dynamics 1350 Capital Blvd Reno, NV 89502 Phone: 775-200-0707 Fax: 775-313-0888 www.luxdynamics.com
OPTION DATACONTACT FACTORY FOR DETAILED SPECIFICATIONS OF EACH OPTION. EVERY OPTION IS AVAILABLE IN 347/480V.
CONTROL TYPE PIR/PHOTOCELL 1-10v CONTROL TYPE PHOTOCELL 1-10v CONTROL TYPE PIR LINE VOLTAGEAMBIENT TEMPERATURE 5°C TO 55°C AMBIENT TEMPERATURE 5°C TO 55°C AMBIENT TEMPERATURE -10°C TO 60°CMOUNTING HEIGHT 8' TO 40' MOUNTING HEIGHT 8' TO 40' MOUNTING HEIGHT 15' TO 40'
APPROXIMATE LUMEN OUTPUT 1,360 LUMENS WITH CA LENS AND 5000K APPROXIMATE LUMEN OUTPUT 2,040 LUMENS WITH
CA LENS AND 5000KAMBIENT TEMPERATURE 0°C TO 55°C AMBIENT TEMPERATURE 0°C TO 55°CILLUMINATION TIME 90 MINUTES ILLUMINATION TIME 90 MINUTES
CONTACT FACTORY
OCCUPANCY SENSOR - ON/OFFDAYLIGHT HARVESTING SENSOR - DIMMERDAYLIGHT HARVESTING & OCCUPANCY SENSOR
EMERGENCY BATTERY 10-WATT EMERGENCY BATTERY 15-WATT WIRELESS CONTROL MODULE
IK10+-L-8-TA-HO3-850-2’-U10-CA2
MOUNTING DETAILS
HXX-18Y OR HXX-18Y T (AC CABLE 2-POINT)-“XX” DENOTES LENGTH IN FEET. AVAILABLE IN 10’, 20’, 30’-“T” AT END OF PART NUMBER
DENOTES TOGGLE INSTEAD OF HOOK
MH1P (MYERS HUB 1 POINT) -(1) 3/4” IP THREADED HUB PROVIDED
-OTHER HUB DIAMETERS ARE AVAILABLE, CONTACT FACTORY
-MACHINED MOUNTING POINT IN FIXTURE CENTER PROVIDED
-STEM/THREADED ROD NOT PROVIDED
-NOT AVAILABLE ON ALL MODELS AND OPTIONS,CONTACT FACTORY FOR DETAILS.
SPM (SINGLE POINT MOUNT)-3/4” IP THREADED HUB, SUSPENDED JUNCTION BOX
-FIXED LENGTH (3’ OR 5’) AIRCRAFT CABLE HANGERS
PROVIDED WITH HOOK ENDS.-POWER CORD ORDERED SEPARATELY
UH2 (UNISTRUT HARDWARE, 2 POINT)-UNISTRUT HARDWARE INCLUDES SPRING-NUT AND BOLT
-2 SETS WILL BE PROVIDED
UH4 (UNISTRUT HARDWARE, 4 POINT)-UNISTRUT HARDWARE INCLUDES SPRING-NUT AND BOLT
-4 SETS WILL BE PROVIDED
SM (SURFACE MOUNT)-NO ADDITIONAL HANGING HARDWARE PROVIDED
-FIXTURE MAY BE ANCHORED TO ANY SUITABLE SUBSTRATE
THROUGH ELECTRONICS CHANNEL
H4PXX (AC CABLE 4-POINT)-“XX” DENOTES LENGTH IN FEET. AVAILABLE IN 10’, 20’, 30’-“SS” AT END OF PART NUMBER DENOTES NATATORIUM GRADE 316 STAINLESS STEEL.
RECOMENDED FOR NATATORIUM APPLICATIONS
MH2P (MYERS HUB 2 POINT)-(2) 3/4” IP THREADED HUBS PROVIDED
-OTHER HUB DIAMETERS ARE AVAILABLE, CONTACT FACTORY
-MACHINED MOUNTING POINTS IN FIXTURE CHANNEL(S)PROVIDED
-STEMS/THREADED RODS NOT PROVIDED
-NOT AVAILABLE ON ALL MODELS AND OPTIONS,CONTACT FACTORY FOR DETAILS.
CABLE MOUNTS:
PENDANT MOUNT:
MYER’S HUB PENDANT MOUNTS:
SURFACE MOUNTS:
UNISTRUT NOT PROVIDED
SPRING NUT
WASHER
BOLT
UNISTRUT NOT PROVIDED
SPRING NUT
WASHER
BOLT
LUX dynamics 1350 Capital Blvd, Reno, NV 89502 Phone: 775.200.0707 Fax: 775.313.0888 www.luxdynamics.comRevised 8.22 .18
