p 160 Communiqu P160DS En
1
Z.I. rue Benoît, 31 – B-7370 Dour (Belgique) Tél. +32 65 61 07 60 • Fax +32 65 61 07 49 • Email : [email protected] • Web : www.menart.eu R.C.-H.R. Tournai : 42.235 • TVA-BTW : BE 401.250.101 • CCP-PCR : 000-0659603-03 Ménart Ménart Ménart Ménart innov innov innov innovates ates ates ates with their new with their new with their new with their new P 160 160 160 160 DS DS DS DS shredder shredder shredder shredder As one of their newly developed machines, MENART announces their P-160-DS shredder that, while an evolution of their previous P-145 range, offer numerous new features : • An increase in power: three engine sizes are offered - 350 HP, 440 HP and 550 HP. • A feed hopper with inclined floor: the feed hopper floor is inclined to provide a better grip of the material. • A compactor roll with greater clearance: the bottom frame of the entry has been lowered to better grip the material when the flow of material is less and the upper frame is raised to allow achieving a greater throughput of material. • Wide rotor : combined with a staggered placement of hammers, everything is set up to attain impressive throughput and superior quality of work shredding. • Electronic management of input of material: The new electronic control unit "MENART Active Control" receives continuous information of the engine loading and then adapts the feeding speed to the rotor in function of that. • The list of equipment that is standard is more complete More information on www.menart.eu Photo of overall view of the P-160-DS with it's rear discharge conveyor in work position. Information Information Information Information: Philippe VANDEPUTTE Tel : + 32 (0)65 61 07 60 Fax : + 32 (0)65 61 07 49 Email : [email protected] Press Release Date : May 15 2011
-
Upload
luis-arman -
Category
Documents
-
view
215 -
download
2
description
CHIPPER
Transcript of p 160 Communiqu P160DS En
-
Z.I. rue Benot, 31 B-7370 Dour (Belgique) Tl. +32 65 61 07 60 Fax +32 65 61 07 49 Email : [email protected] Web : www.menart.eu
R.C.-H.R. Tournai : 42.235 TVA-BTW : BE 401.250.101 CCP-PCR : 000-0659603-03
MnartMnartMnartMnart innovinnovinnovinnovatesatesatesates with their newwith their newwith their newwith their new PPPP 160160160160 DSDSDSDS shreddershreddershreddershredder
As one of their newly developed machines, MENART announces their P-160-DS shredder that, while an
evolution of their previous P-145 range, offer numerous new features :
An increase in power: three engine sizes are offered - 350 HP, 440 HP and 550 HP.
A feed hopper with inclined floor: the feed hopper floor is inclined to provide a better
grip of the material.
A compactor roll with greater clearance: the bottom frame of the entry has been
lowered to better grip the material when the flow of material is less and the upper frame is
raised to allow achieving a greater throughput of material.
Wide rotor : combined with a staggered placement of hammers, everything is set up to
attain impressive throughput and superior quality of work shredding.
Electronic management of input of material: The new electronic control unit
"MENART Active Control" receives continuous information of the engine loading and then
adapts the feeding speed to the rotor in function of that.
The list of equipment that is standard is more complete
More information on www.menart.eu
Photo of overall view of the P-160-DS with it's rear discharge conveyor in work position.
InformationInformationInformationInformation::::
Philippe VANDEPUTTE
Tel : + 32 (0)65 61 07 60
Fax : + 32 (0)65 61 07 49
Email : [email protected]
Press Release
Date : May 15 2011
