OWNER’S MANUAL LED TV*Please read this manual carefully before operating your TV and retain it for...

Please read this manual carefully before operating your TV and retain it for future reference.

OWNER’S MANUAL

LED TV** LG LED TV applies LCD screen with LED backlights.

50LN5100 55LN5100

47LN5200 50LN5200 55LN5200

32LN530B 32LN5300 39LN5300 42LN5300

32LN5310 47LN5310 50LN5310 55LN5310

32LN536B 42LN5400 47LN5400 50LN5400 55LN5400

www.lg.comP/NO : MFL67651192 (1309-REV05)

ENG

LISH

2 IMPORTANT SAFETY INSTRUCTIONS

yy Do not allow the television to become wet.

yy Clean only with a dry cloth.

yy Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

yy Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

yy Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

yy Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

RISK OF ELECTRIC SHOCKDO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

WARNING/CAUTION

RISK OF ELECTRIC SHOCKDO NOT OPEN

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNINGIf you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTIONIf you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTEThe note helps you understand and use the product safely. Please read the note carefully before using the product.

Short-circuitBreaker

Power Supply

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Wash hands after handling.

ENG

LISH

3IMPORTANT SAFETY INSTRUCTIONS

yy Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

yy Only use attachments/accessories specified by the manufacturer.

yy Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

yy Unplug this apparatus during lightning storms or when unused for long periods of time.

yy Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yy Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.yy Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, induce vomiting and go the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

yy CAUTION concerning the Power Cord (Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

yyWarning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

yy Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

ENG

LISH


yy Grounding(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Short-circuit Breaker

Power Supply

yy As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.yy Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.yy Outdoor Antenna Grounding (Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Short-circuitBreaker

Power Supply

Ground Clamp

Grounding Conductor (NEC Section 810-21)

Antenna Lead in Wire

Electric Service Equipment

Antenna Discharge Unit (NEC Section 810-20)

Ground Clamp Power Service Grounding Electrode System (NEC Art 250, Part H)NEC: National Electrical Code

yy CleaningWhen cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzine.yyMovingMake sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.yy VentilationInstall your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.yy If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.yy Keep the product away from direct sunlight.yy Never touch this apparatus or antenna during a lightning storm.yyWhen mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.yy Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.yy Disconnecting the Main PowerThe power outlet used with this device must remain easily accessible.yy Store the accessories (battery, etc.) in a safe location out of the reach of children.yy This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.yy Do not dispose of batteries in a fire.yy Do not short circuit, disassemble, or allow the batteries to overheat.

ENG

LISH

5IMPORTANT SAFETY INSTRUCTIONS

yy Dot DefectThe panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.yy Generated SoundCracking noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.yy Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.yy If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

Preventing image burn or burn-in on your TV screen

yy If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.yy If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.yy Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.

ENG

LISH


For USA and Canada

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and the receiver.- Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

Additional information of the manual

Viewing the owner’s manual

The owner’s manual in PDF file format is supplied on the enclosed CD. Install the Adobe Acrobat Reader to view the owner’s manual on your PC.

1 Insert the supplied CD. The web page appears automatically.

2 Click Owner’s Manual on the web page.

3 View the owner’s manual.

yy If the web page does not appear automatically, access My computer and then click LG and index.html to view the owner’s manual.

NOTE

ENG

LISH

7LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [email protected]. This offer is valid for three (3) years from the date on which you purchased the product.

ENG

LISH

8 TABLE OF CONTENTS


6 Additional information of the manual

7 LICENSES

7 OPEN SOURCE SOFTWARE NOTICE

8 TABLE OF CONTENTS

9 INSTALLATION PROCEdURE

9 ASSEMBLING ANd PREPARING

9 Unpacking11 Parts and buttons12 Lifting and moving the TV13 Setting up the TV13 - Attaching the stand14 - Mounting on a table16 - Mounting on a wall17 - Tidying cables

18 MAKING CONNECTIONS

18 Connecting to an antenna or cable19 Connecting to a HD receiver, DVD player,

or VCR19 - HDMI connection20 - Connecting to a mobile phone21 - Component connection22 - Composite connection23 Connecting a PC23 - HDMI connection24 Connecting to an audio system24 - Digital optical audio connection25 Connecting a USB device

26 REMOTE CONTROL

28 WATCHING TV

28 Turning the TV on for the first time

29 SPECIFICATIONS

32 TROUBLESHOOTING

34 EXTERNAL CONTROL dEVICE SETUP

TABLE OF CONTENTS

yy Image shown may differ from your TV.yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.yy The available menus and options may differ from the input source or product model that you are using.yy New features may be added to this TV in the future.

NOTE

ENG

LISH

9INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

INSTALLATION PROCEdURE

1 Open the package and make sure all the accessories are included.

2 Attach the stand to the TV set.

3 Connect an external device to the TV set.

ASSEMBLING ANd PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

yy Do not use any unapproved items to ensure the safety and product life span.yy Any damages or injuries by using unapproved items are not covered by the warranty. yy Some models appear to have a thin film on the screen. It is actually part of the screen; do not remove it.

CAUTION

yy The items supplied with your product may vary depending on the model.yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.yy Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

B

A A

B

*A 10 mm (0.39 inches)*B 18 mm (0.7 inches)

NOTE

ENG

LISH

10 ASSEMBLING AND PREPARING

Remote Control, Batteries (AAA)(See page. 26)

Owner’s Manual, CD manual

Power Cord

Stand Body, Stand Base(See page. 13)

Stand Screws 3 EA, P5 x 25 (See page. 13)

Stand Screws 4 EA, M4 x 14 (See page. 13)

(For 50LN5100, 47/50LN5200, 32LN530B, 32/39/42LN5300, 32/47/50LN5310, 32LN536B, 42/47/50LN5400)

Desk-mount Screw(See page. 14)

Cable Holder(See page. 17)

ENG

LISH

11ASSEMBLING AND PREPARING

Parts and buttons

Buttons

Screen

SpeakersPower IndicatorRemote Control SensorIntelligent Sensor1

Button Description

/ ( / ) Scrolls through the saved channels.

/ ( / ) Adjusts the volume level.

(OK ) Selects the highlighted menu option or confirms an input.

(SETTINGS) Accesses the main menus, or saves your input and exits the menus.

(INPUT ) Changes the input source.

( ) Turns the power on or off.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

ENG

LISH


Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

yy Avoid touching the screen at all times, as this may result in damage to the screen.yy Do not place the product on the floor with its front facing down. Failure to do so may result in damage to the screen.

CAUTION

yy It is recommended to move the TV in the box or packing material that the TV originally came in.yy Before moving or lifting the TV, disconnect the power cord and all cables.yyWhen holding the TV, the screen should face away from you to avoid damage.

yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

yy Use at least two people to move a large TV.yyWhen transporting the TV by hand, hold the TV as shown in the following illustration.

yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.yyWhen transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

ENG

LISH


Setting up the TV

You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture.

Attaching the stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.yyMake sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)yy Do not tighten the screws with too much force; otherwise they may be damaged and come loose later.

CAUTION

yy Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

NOTE

2

1 3

Stand Body

Stand Base

Front

3 EA P5 x 25

4 EA M4 x 14

ENG

LISH


Mounting on a table

1 Lift and tilt the TV into its upright position on a table.- Leave a 10 cm (4 inches) (minimum) space

from the wall for proper ventilation.

10 cm

10 cm

10 cm

10 cm

(4 inches)

2 Connect the power cord to a wall outlet.

yy Do not place the TV near or on sources of heat, as this may result in fire or other damage.

CAUTION

Securing the TV to a table

(For 50LN5100, 47/50LN5200, 32LN530B, 32/39/42LN5300, 32/47/50LN5310, 32LN536B, 42/47/50LN5400)

Attach the TV to a table to prevent from tilting forward, damage, and potential injury. Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand.

yy To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.

WARNING

ENG

LISH


Using the Kensington security system (optional)

The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the TV and a table.

yy The Kensington security system is optional. You can obtain additional accessories from your local dealer.

NOTE

Securing the TV to a wall (optional)

(Depending on model)

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.- If there are bolts inserted at the eye-bolts

position, remove the bolts first.

2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

yyMake sure that children do not climb on or hang on the TV.

CAUTION

yy Use a platform or cabinet that is strong and large enough to support the TV securely.yy Brackets, bolts, and ropes, are optional. You can obtain additional accessories from your local dealer.

NOTE

ENG

LISH


Mounting on a wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount.

10 cm

10 cm

10 cm

10 cm

(4 inches)

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Model 32LN530B 32LN5300 32LN5310 32LN536B

39LN5300 42LN5300 42LN5400

VESA (A x B) A

B

200 x 100 200 x 200

Standard screw M4 M6

Number of screws 4 4

Wall mount bracket (optional)

LSW130B LSW230B MSW240

Model 50LN5100 55LN5100 47LN5200 50LN5200 55LN5200

47LN5310 50LN5310 55LN5310 47LN5400 50LN5400 55LN5400

VESA (A x B) A

B

400 x 400

Standard screw M6

Number of screws 4


LSW430B MSW240


LSW130B

LSW230B

LSW430B

MSW240

yy Disconnect the power before moving or installing the TV. Otherwise electric shock may occur.yy If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. When using a third-party wall mount, it is not covered by the warranty.yy Do not over tighten the screws as this may cause damage to the TV and void your warranty.yy Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

CAUTION

yy Use the screws that are listed in the VESA standard screw specifications.yy The wall mount kit includes an installation manual and necessary parts.yy The wall mount bracket is optional. You can obtain additional accessories from your local dealer.yy The length of screws may differ depending upon the wall mount. Make sure to use the proper length.yy For more information, refer to the manual supplied with the wall mount.

NOTE

ENG

LISH


Tidying cables

1 Install the cable holder as shown.

Cable Holder

2 Gather and bind the cables with the cable holder.

Cable Holder

yy Do not move the TV by holding the cable holder, as the cable holders may break, and injuries and damage to the TV may occur.

CAUTION

ENG

LISH


MAKING CONNECTIONS

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

yy If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device.yy The external device connections shown may differ slightly from illustrations in this manual.yy Connect external devices to the TV regardless about the order of the TV port.yy If you connect a gaming device to the TV, use the cable supplied with the gaming device.yy Refer to the external equipment’s manual for operating instructions.

NOTE

Connecting to an antenna or cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional.

VHF Antenna

UHF Antenna

Coaxial (75Ω)

(*Not provided)

Antenna

Terminal

yyMake sure not to bend the copper wire of the RF cable.

Copper wire

yy Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

CAUTION

yy Use a signal splitter to use more than 2 TVs.yy Visit http://lgknowledgebase.com for more information about the antenna and cable connection. Search for antenna.yy DTV Audio Supported Codec: MPEG, Dolby Digital

NOTE

ENG

LISH

19MAKING CONNECTIONS

Connecting to a HD receiver, DVD player, or VCR

Connect a HD receiver, DVD player, or VCR to the TV and select an appropriate input mode.

HDMI connection

HDMI is the best way to connect a device.Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration.

yy Use the latest High Speed HDMI™ Cable that supports CEC (Customer Electronics Control) function. yy High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.yy HDMI Audio Supported Format: Dolby Digital, PCM (Up to 192 kHz, 32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz) -> DTS is not supported.

NOTE

Choose any HDMI input port to connect. It does not matter which port you use.

IN 2

IN 2

(MHL

)

HDMI

IN 1(For LN5200, LN530B, LN5300, LN5310, LN5400 series)

(For LN5100 series)

(*N

ot p

rovi

ded)

DVD / Blu-Ray / HD Cable Box / HD STB

ENG

LISH


Connecting to a mobile phone

(For LN5200, LN530B, LN5300, LN5310, LN5400 series)

Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets.

yy Connect the mobile phone to the HDMI IN 2 (MHL) port to view the phone screen on the TV.yy This only works with an MHL-enabled phones.yyWith some MHL supporting mobile phones, you can use the TV remote to control the phone.yy An MHL supported cable is needed to connect the TV and a mobile phone.yy Remove the MHL cable from the TV when: - the MHL function is disabled. - your mobile device is fully charged in standby mode.

NOTE

IN 2

(MHL

)

(*Not provided)

Mobile phone

MHL Cable

ENG

LISH


Component connection

Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration.

yy If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color.yy Check to ensure the cables are matched with the corresponding color connection.

NOTE

COMPONENT IN / AV INVIDEO/ PB PRY RAUDIOL/MONO

PB PRY RL

VIDEO AUDIO

(*Not provided)

GR

EENG

REEN

BLU

EB

LUE

RED

RED

RED

RED

WH

ITE

WH

ITE

(*Not provided)

VCR / DVD / Blu-Ray / HD Cable Box

ENG

LISH


Composite connection

Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration.

yy If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.yy Check to ensure the cables are matched with the corresponding color connection.

NOTE

COMPONENT IN / AV INVIDEO/ PB PRY RAUDIOL/MONO

VIDEO RAUDIOL/MONO

(*Not provided)

VCR / DVD / Blu-Ray / HD Cable Box

RED

RED

WH

ITE

WH

ITE

YELLOW

YELLOW

ENG

LISH


Connecting a PC

yy Use an HDMI connection for the best image quality.yy Depending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use.yy In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.yy The synchronization input form for horizontal and vertical frequencies is separate.yy Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.yy If you use DVI to HDMI cable for PC, you have to use external speaker for PC audio sound.

NOTE

HDMI connection

HDMI

IN 1

(*N

ot p

rovi

ded)

PC

ENG

LISH


Connecting to an audio system

(For LN5100, LN5200, LN530B, LN5300, LN5310, LN5400 series)

You can use an optional external audio system instead of the built-in speaker.

Digital optical audio connection

Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration.

yy Do not look into the optical output port. Looking at the laser beam may damage your vision.yy Audio with ACP (Audio Copy Protection) function may block digital audio output.

NOTE

OPTICAL AUDIO IN

Digital Audio System

(*N

ot p

rovi

ded)

ENG

LISH


Connecting a USB device

Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV.

USB

IN

USB(*Not provided)

ENG

LISH

26 REMOTE CONTROL

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. To remove the batteries, perform the installation actions in reverse.

yy Do not mix old and new batteries, as this may damage the remote control. CAUTION

This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

FLASHBK

AUDIO

(POWER)Turns the TV on or off.

TVReturns to the last TV channel.

CAPTIONActivates or deactivates the subtitles.

AV MODESelects an AV mode.

RATIOResizes an image.

INPUTChanges the input source. Turns the TV on if it is off.

VOL Adjusts the volume level.

FAVAccesses your favorite channel list.

AUDIODigital signal: Changes the audio language.Analog signal: Changes the MTS sound.

MUTE Mutes all sounds.

CH Scrolls through the saved channels. PAGE

Moves to the previous or next screen.

Number buttonEnters numbers.

- (Dash)Inserts a dash between numbers such as 2-1 and 2-2.

LISTAccesses the saved channel list.

FLASHBKAlternates between the two last channels selected (pressing repeatedly).

ENG

LISH

27REMOTE CONTROL

FLASHBK

AUDIO

PICTUREChanges the image mode.

INFO Shows information on the current program.

SOUNDChanges the sound mode.

Accesses the AV devices connected to the TV; Opens the SIMPLINK menu.

SLEEPSets the length of time until the TV to turns off.

Control buttons ( , , , , )Controls the SIMPLINK compatible devices (USB,SIMPLINK).

Color buttonsThese access special functions in some menus. ( : Red, : Green, : Yellow, : Blue)

SETTINGSAccesses the main menu.

Q.MENUAccesses the quick menu.

Navigation buttons (up/down/left/right)Scrolls through menus or options.

OK Selects menus or options and confirms your input.

BACKReturns to the previous screen.

EXITClears all on-screen displays and returns to TV viewing.

ENG

LISH

28 WATCHING TV

WATCHING TV

Turning the TV on for the first time

When you turn the TV on for the first time, the initial setting screen appears. Select a language and customize the basic settings.

1 Connect the power cord to a power outlet.

2 In standby mode, press the power button on the remote control to turn the TV on. The initial setting screen appears when you turn the TV on for the first time.

yy You can also access Initial Setting by accessing OPTION in the main menu.

NOTE

3 Follow the on-screen instructions to customize your TV settings according to your preferences.

Language Selects a language to display.

Mode Setting Selects Home Use for the home environment.

Time Zone Selects the time zone and daylight saving.

Auto Tuning Scans and saves available channels automatically.

yy To display images in the best quality for your home environment, select Home Use.yy Store Demo is suitable for the retail environment.yy If you select Store Demo, any customized settings will switch back to the default settings of Store Demo in 5 minutes.

NOTE

4 When the basic settings are complete, press the OK button.

yy If you do not complete the initial setting, it will appear whenever the TV turns on.yy Disconnect the power cord from the power outlet when you do not use the TV for a long period of time.

NOTE

5 To turn the TV off, press the power button on the remote control.

ENG

LISH

29SPECIFICATIONS

SPECIFICATIONS

Product specifications may be changed without prior notice due to upgrade of product functions.

Power requirement AC 100 - 240 V ~ 50 / 60 Hz

Television System ATSC, NTSC-M, 64 & 256 QAM

Program Coverage VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135

External Antenna Impedance 75 Ω

Environment condition

Operating Temperature 0 °C ~ 40 °C (32 °F ~ 104 °F)

Operating Humidity Less than 80 %

Storage Temperature -20 °C ~ 60 °C (-4 °F ~ 140 °F)

Storage Humidity Less than 85 %

MODELS

32LN530B (32LN530B-UA)

39LN5300 (39LN5300-UB)

32LN5300 (32LN5300-UB)

32LN5310 (32LN5310-UB)

32LN536B (32LN536B-UB)

Dimensions (W x H x D)

With stand738 x 497 x 207 (mm) 894 x 587 x 236 (mm)

29.0 x 19.5 x 8.1 (inches) 35.1 x 23.1 x 9.2 (inches)

Without stand738 x 449 x 79 (mm) 894 x 537 x 79.0 (mm)


WeightWith stand 7.0 kg (15.4 lbs) 9.7 kg (21.3 lbs)

Without stand 6.4 kg (14.1 lbs) 8.6 kg (18.9 lbs)

Current Value / Power consumption 1.3 A / 80 W 1.5 A / 100 W

MODELS 42LN5300 (42LN5300-UB)


With stand968 x 629 x 236 (mm)

38.1 x 24.7 x 9.2 (inches)

Without stand968 x 579 x 79 (mm)

38.1 x 22.7 x 3.1 (inches)

WeightWith stand 10.7 kg (23.5 lbs)

Without stand 9.6 kg (21.1 lbs)

Current Value / Power consumption 1.6 A / 110 W

ENG

LISH

30 SPECIFICATIONS

MODELS 42LN5400 (42LN5400-UA)

47LN5200 (47LN5200-UB)

47LN5310 (47LN5310-UB)

47LN5400 (47LN5400-UA)


With stand968 x 629 x 236 (mm) 1,080 x 694 x 264 (mm)


Without stand968 x 579 x 79 (mm) 1,080 x 642 x 80.5 (mm)





MODELS

50LN5100 (50LN5100-UB)

55LN5100 (55LN5100-UB)

50LN5200 (50LN5200-UB)

55LN5200 (55LN5200-UB)

50LN5310 (50LN5310-UB)

55LN5310 (55LN5310-UB)

50LN5400 (50LN5400-UA)

55LN5400 (55LN5400-UA)


With stand1,136 x 727 x 264 (mm) 1,250 x 790 x 297 (mm)


Without stand1,136 x 673 x 82.1 (mm) 1,250 x 737 x 79.1 (mm)





ENG

LISH

31SPECIFICATIONS

HDMI (PC) supported mode

Resolution Horizontal Frequency (kHz)

Vertical Frequency (Hz)

640 x 350 31.468 70.09

720 x 400 31.469 70.08

640 x 480 31.469 59.94

800 x 600 37.879 60.31

1024 x 768 48.363 60.00

1360 x 768 47.712 60.015

1152 x 864 54.348 60.053

1280 x 1024 63.981 60.02

1920 x 1080 67.50 60.00

For 50/55LN5100, 47/50/55LN5200, 32/39/42LN5300, 32/47/50/55LN5310, 42/47/50/55LN5400

HDMI (DTV) supported mode



720 x 480p31.47 59.94

31.50 60.00

1280 x 720p44.96 59.94

45.00 60.00

1920 x 1080i33.72 59.94

33.75 60.00

1920 x 1080p

26.97 23.976

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.94

67.50 60.00

Component port connecting information

Component ports on the TV Y PB PR

Video output ports on DVD player

Y PB PR

Y B-Y R-Y

Y Cb Cr

Y Pb Pr

Component supported mode



720 x 480i15.73 59.94

15.73 60.00

720 x 480p31.47 59.94

31.50 60.00

1280 x 720p44.96 59.94

45.00 60.00

1920 x 1080i33.72 59.94

33.75 60.00

1920 x 1080p

26.97 23.94

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.94

67.50 60.00

ENG

LISH

32 TROUBLESHOOTING

TROUBLESHOOTING

General

Problem Solution

Cannot control the TV with the remote control.

yy Check the remote control sensor on the product and try again.yy Check if there is any obstacle between the product and the remote control.yy Check if the batteries are still working and properly installed ( to , to ).

No image display and no sound is produced.

yy Check if the product is turned on.yy Check if the power cord is connected to a wall outlet.yy Check if there is a problem in the wall outlet by connecting other products.

Image appears slowly when the TV turns on.

yy The image is muted during the product startup process. This is normal. If the image does not appear in a few minutes, unplug the TV for 30 seconds and try again. If the image still does not appear, contact the authorized service center in your local area.

Cannot connect external devices.

yy Refer to the Connection Overview and connect an external device.

The TV turns off suddenly. yy Check the power control settings. The power supply may be interrupted.yy Check if the Auto sleep feature is activated in the Time settings.

Refer to the Sleep Timer.yy If there is no signal while the TV is on, the TV will turn off automatically after 15

minutes of inactivity. (Depending on model)

Audio

Problem Solution

No sound is produced while images are displaying.

yy Press VOL or button.yy Check if the sound is muted by pressing MUTE.yy Scroll to other channels. There may a problem with the broadcast.yy Check if the TV Speaker feature is activated in the menu option.

No output from one of the speakers

yy Adjust Balance in the menu option.

Unusual sound from inside the TV is produced.

yy A change in ambient humidity or temperature may result in an unusual noise when the product turns on or off. There is no problem with your product.

ENG

LISH

33TROUBLESHOOTING

Video

Problem Solution

An image displays in black and white or the color quality is poor.

yy Adjust the color setting in the menu option.yy Keep a sufficient distance between this product and other electronic products.yy Scroll to other channels. There may a problem with the broadcast.

Horizontal or vertical bars appears or images blur

yy Check if there are local interferences such as an electrical appliance or power tool.

Lines or streaks appear on images

yy Check the antenna or aim the antenna to the proper direction.

Afterimages (ghosts) appear when the product turns off

yy Pixels may have been damaged from a fixed image displayed for a long time (image burn). Use a screen saver to prevent the pixel damage on the screen.

The power is on but the screen appears extremely dark.

yy Adjust the brightness and contrast in the menu option.

“No Signal” appears on the screen.

yy Check if the signal cable is connected between the TV and products properly.yy Check the selected input source by pressing INPUT.

Black spots appear on the screen.

yy Several pixels in red, green, white, or black may appear on the screen that can attribute to the characteristics of the panel. yy This is normal.

The display offset is wrong. yy Adjust the position setting in the Picture menu.yy Check if the video card resolution and frequency are supported by the product.

If the frequency is out of range, set to the recommended resolution using the display settings on the external device.

Thin lines appear in the background of the screen.

yy Check the video cable connections.

The reception on some channels is poor

yy Scroll to other channels. There may a problem with the broadcast.yy The station signal may be weak. Aim the antenna to the proper direction.yy Check if there is local interferences such as an electrical appliance or power tool.

ENG

LISH

34 EXTERNAL CONTROL DEVICE SETUP

EXTERNAL CONTROL dEVICE SETUP

To obtain the external control device setup information, please visit www.lg.com.

TUNE INTO SAFETY• One size does NOT fit all. Follow the manufacturer’s

recommendations for the safe installation and use of your flat panel display.

• Carefully read and understand all enclosed instructions for proper use of this product.

• Don’t allow children to climb on or play with furniture and television sets.

• Don’t allow place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.

• Remember that children can become excited while watching a program, especially on a “larger than life” flat panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.

• Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:• Use a mount that has been recommended by the display manufacturer and/or listed by an

independent laboratory (such as UL, CSA, ETL).• Follow all instructions supplied by the display and wall mount manufacturers.• If you have any doubts about your ability to safely install your flat panel display, contact your retailer

about professional installation.• Make sure that the wall where you are mounting the display is appropriate.

Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.

• A minimum of two people are required for installation. Flat panel displays can be heavy.

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

THE ISSUE• The home theater entertainment experience is a growing

trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.

• Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury.

THIS MANUFACURER CARES!• The consumer electronics industry is committed to making

home entertainment enjoyable and safe.

CHILD SAFETY:It Makes A Difference How and Where You Use Your Flat Panel Display

The model and serial numbers of the TV are located on the back and one side of the TV. Record them below should you ever need service.

MODEL

SERIAL

This product qualifies for ENERGY STAR in the factory default (Home Use) setting. Changing the factory default settings or enabling other

features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR.

The extended owner’s manuals that contain information on the advanced features of this LG TV are located on the CD-ROM provided in an electronic version. To read these files, you will need to use a personal computer (PC) equipped with a CD-ROM drive.

LG Customer Information CenterFor inquires or comments, visit www.lg.com or call;

1-800-243-0000 USA, Consumer User

1-888-865-3026 USA, Commercial User

1-888-542-2623 CANADA

Register your product Online!www.lg.com

OWNER’S MANUAL

EXTERNAL CONTROLDEVICE SETUPPlease read this manual carefully before operating the set and retain it for future reference.

www.lg.com

2

ENG

ENG

LISH

2 KEY CODES

KEY CODES• This feature is not available for all models.

Code (Hexa) Function Note Code

(Hexa) Function Note

00 CH +, PR + R/C Button 45 Q.Menu R/C Button

01 CH -, PR - R/C Button 4C List, - (ATSC Only) R/C Button

02 Volume + R/C Button 53 List R/C Button

03 Volume - R/C Button 5B Exit R/C Button

06 > (Arrow Key / Right Key) R/C Button 61 Blue R/C Button

07 < (Arrow Key / Left Key) R/C Button 63 Yellow R/C Button

08 Power R/C Button 71 Green R/C Button

09 Mute R/C Button 72 Red R/C Button

0B Input R/C Button 79 Ratio / Aspect Ratio R/C Button

0E SLEEP R/C Button 91 AD (Audio Description) R/C Button

0F TV, TV/RAD R/C Button 7A User Guide R/C Button

10 - 19 Number Key 0 - 9 R/C Button 7C Smart / Home R/C Button

1A Q.View / Flashback R/C Button 7E SIMPLINK R/C Button

1E FAV (Favorite Channel) R/C Button 8E (Forward) R/C Button

20 Text (Teletext) R/C Button 8F (Rewind) R/C Button

21 T. Opt (Teletext Option) R/C Button AA Info R/C Button

28 Return (BACK) R/C Button AB Program Guide R/C Button

30 AV (Audio / Video) Mode R/C Button B0 (Play) R/C Button

39 Caption/Subtitle R/C Button B1 ꕗ (Stop / Live TV) R/C Button

40 Λ (Arrow Key / Cursor Up) R/C Button BA ꕘ (Freeze / Slow Play / Pause) R/C Button

41 V (Arrow Key / Cursor Down) R/C Button BD ꔄ (REC) R/C Button

42 My Apps R/C Button DC 3D R/C Button

43 Menu / Settings R/C Button 9F App / * R/C Button

44 OK / Enter R/C Button

* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel. (For South Korea, Japan, North America, Latin America except Colombia models)

3EN

GEN

GLISH

3EXTERNAL CONTROL DEVICE SETUP

EXTERNAL CONTROL DEVICE SETUP• Image shown may differ from your TV.

Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.

Note: The type of control port on the TV can be different between model series.

* Please be advised that not all models support this type of connectivity.* Cable is not provided.

USB to Serial converter with USB CableUSB Type

USB

IN

(TV)

(PC)

(PC)

RS-232C IN(CONTROL & SERVICE)

(TV)

(TV)(PC)

(TV)(PC)

SERV

ICE

ONLY



13

2

13

2

• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter which is not made nor provided by LG.

• It can be purchased from computer stores that carry accessories for IT support professionals.

4

ENG

ENG

LISH


RS-232C with RS-232C Cable (Legacy)Phone jack Type• You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and

the TV, which is specified in the manual.* For other models, connect to the USB port.

USB

IN

(TV)

(PC)

(PC)


(TV)

(TV)(PC)

(TV)(PC)

SERV

ICE

ONLY



13

2

13

2

- This connection can only be used for the following models: 55/47/39LN5450-UA, 55/50/47/42LN5400-UA, 42/39/32LN5300-UA, and 37/32LN530B-UA.

USB

IN

(TV)

(PC)

(PC)


(TV)

(TV)(PC)

(TV)(PC)

SERV

ICE

ONLY



13

2

13

2

- This connection can only be used for the following models: 42/50PN4500-UA, 50/60PN5300-UF, 50/60PN6500-UA, and 60PN6550-UA.

Customer Computer RS-232C configurations3-Wire Configurations(Not standard)

1

6

5

9

PC TV

RXD 2 2 TXD

TXD 3 1 RXD

GND 5 3 GND

OR

RXD 3 2 TXD

TXD 2 1 RXD

GND 5 3 GND

D-Sub 9 Phone

RS-232C(Serial port)

Set ID

For Set ID number, see "Real Data Mapping" on p.6

1. Press SETTINGS to access the main menus.2. Press the Navigation buttons to scroll to OPTION and press OK.3. Press the Navigation buttons to scroll to SET ID and press OK.4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.5. When you are finished, press EXIT.

5EN

GEN

GLISH


Communication Parameters

• Baud rate : 9600 bps (UART)• Data length : 8 bits• Parity : None

• Stop bit : 1 bit• Communication code : ASCII code• Use a crossed (reverse) cable.

Command reference list(Depending on model)

COMMAND1 COMMAND2 DATA(Hexadecimal) COMMAND1 COMMAND2 DATA

(Hexadecimal)01. Power off k a 00 13. Balance k t 00 to 64

02. Aspect Ratio k c (p.7)

14. Color (Colour)Temperature

x u 00 to 64

03. Screen Mute k d (p.7)

15. ISM Method (Only Plasma TV)

j p (p.8)

04. Volume Mute k e 00 to 01 16. Energy

Saving j q 00 to 05

05. Volume Control k f 00 to 64 17. Tune

Command m a (p.8)

06. Contrast k g 00 to 6418. Channel(Programme)Add/Del(Skip)

m b 00 to 01

07. Brightness k h 00 to 64 19. Key m c Key Codes

08. Color/Colour k i 00 to 64

20. Control Back Light, Control Panel Light

m g 00 to 64

09. Tint k j 00 to 64 21. Input select (Main)

x b (p.10)

10. Sharpness k k 00 to 32 22. 3D (Only

3D models)x t (p.11)

11. OSD Select k l 00 to 01

23. Extended 3D (Only 3D models)

x v (p.11)

12. Remote Control Lock Mode

k m 00 to 01

* Note: During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are not executed and treated as NG.

6

ENG

ENG

LISH


Transmission / Receiving ProtocolTransmission

[Command1][Command2][ ][Set ID][ ][Data][Cr]

[Command 1] : First command to control the TV. (j, k, m or x)[Command 2] : Second command to control the TV.[Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu.

Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.

* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on transmission/receiving protocol.

[DATA] : To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.[Cr] : Carriage Return - ASCII code ‘0x0D’[ ] : Space – ASCII code ‘0x20’

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x]

* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x]

* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors.

Data 00: Illegal Code

Real data mapping (Hexadecimal b Decimal)

* When you enter the [data] in hexadecimal, refer to following conversion table.* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.

00 : Step 0 32 : Step 50 (Set ID 50) FE : Step 25401 : Step 1 (Set ID 1) 33 : Step 51 (Set ID 51) FF : Step 255... ... ...0A : Step 10 (Set ID 10) 63 : Step 99 (Set ID 99) 01 00 : Step 256... ... ...0F : Step 15 (Set ID 15) C7 : Step 199 27 0E : Step 999810 : Step 16 (Set ID 16) C8 : Step 200 27 0F : Step 9999... ... ...

7EN

GEN

GLISH


* Commands may work differently depending on model and signal.

01. Power (Command: k a) To control Power Off of the set.

Transmission[k][a][ ][Set ID][ ][Data][Cr]

Data 00 : Power Off

Ack [a][ ][Set ID][ ][OK/NG][Data][x]

To Show Power On. (Works TV is On Only)

Transmission [k][a][ ][Set ID][ ][FF][Cr]

Ack [a][ ][Set ID][ ][OK][01][x]

* Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function.

02. Aspect Ratio (Command: k c) (Main Picture Size)

To adjust the screen format. (Main picture format) You can also adjust the screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu.

Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01 : Normal screen (4:3)

02 : Wide screen (16:9)

04 : Zoom 05 : Zoom 2 (Latin America

except Colombia Only)

06 : Set by Program/ Original

07 : 14:9(Europe, Colombia, Mid-East, Asia except South Korea and Japan)09 : * Just Scan0B : Full Wide(Europe, Colombia, Mid-East, Asia except South Korea and Japan)10 to 1F : Cinema Zoom 1

to 16

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

* Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.

* In DTV/HDMI/Component mode (high-definition), Just Scan is available.

* Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially.

03. Screen Mute (Command: k d) To select screen mute on/off.

Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00 : Screen mute off (Picture on) Video mute off

01 : Screen mute on (Picture off) 10 : Video mute on

Ack [d][ ][Set ID][ ][OK/NG][Data][x]

* In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.

04. Volume Mute (Command: k e) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control.

Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on)

Ack [e][ ][Set ID][ ][OK/NG][Data][x]

05. Volume Control (Command: k f) To adjust volume. You can also adjust volume with the volume buttons on remote control.

Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [f][ ][Set ID][ ][OK/NG][Data][x]

06. Contrast (Command: k g) To adjust screen contrast. You can also adjust contrast in the PICTURE menu.

Transmission [k][g][ ][Set ID][ ][Data][Cr]


Ack [g][ ][Set ID][ ][OK/NG][Data][x]

07. Brightness (Command: k h) To adjust screen brightness. You can also adjust brightness in the PICTURE menu.

Transmission [k][h][ ][Set ID][ ][Data][Cr]


Ack [h][ ][Set ID][ ][OK/NG][Data][x]

08. Color/Colour (Command: k i) To adjust the screen Color(Colour). You can also adjust colour in the PICTURE menu.

Transmission [k][i][ ][Set ID][ ][Data][Cr]


Ack [i][ ][Set ID][ ][OK/NG][Data][x]

8

ENG

ENG

LISH


09. Tint (Command: k j) To adjust the screen tint. You can also adjust tint in the PICTURE menu.

Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red : 00 to Green : 64

Ack [j][ ][Set ID][ ][OK/NG][Data][x]

10. Sharpness (Command: k k) To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu.

Transmission [k][k][ ][Set ID][ ][Data][Cr]


Ack [k][ ][Set ID][ ][OK/NG][Data][x]

11. OSD Select (Command: k l) To select OSD (On Screen Display) on/off when controlling remotely.

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 01 : OSD off 01 : OSD on

Ack [l][ ][Set ID][ ][OK/NG][Data][x]

12. Remote control lock mode (Command: k m) To lock the front panel controls on the monitor and remote control.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 01 : Lock off 01 : Lock on

Ack [m][ ][Set ID][ ][OK/NG][Data][x]

* If you are not using the remote control, use this mode. When main power is off & on (plug-off and plug-in, after 20 - 30 seconds), external control lock is released.

* In the standby mode (DC off by off timer or ‘ka’, ‘mc’ command), and if key lock is on, TV will not turn on by power on key of IR & Local Key.

13. Balance (Command: k t) To adjust balance. You can also adjust balance in the AUDIO menu.

Transmission [k][t][ ][Set ID][ ][Data][Cr]


Ack [t][ ][Set ID][ ][OK/NG][Data][x]

14. Color(Colour) Temperature (Command: x u) To adjust colour temperature. You can also adjust Color(Colour) Temperature in the PICTURE menu.

Transmission [x][u][ ][Set ID][ ][Data][Cr]


Ack [u][ ][Set ID][ ][OK/NG][Data][x]

15. ISM Method (Command: j p) (Only Plasma TV) To control the ISM method. You can also adjust ISM Method in OPTION menu.

Transmission [j][p][ ][Set ID][ ][Data][Cr]

Data Min : 02: Orbiter 08: Normal 20: Color(Colour) Wash

Ack [p][ ][Set ID][ ][OK/NG][Data][x]

16. Energy Saving (Command: j q) To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.

Transmission [j][q][ ][Set ID][ ][Data][Cr]

Data 00 : Off 01 : Minimum 02 : Medium 03 : Maximum 04 : Auto 05 : Screen off* (Depending on model)

Ack [q][ ][Set ID][ ][OK/NG][Data][x]

17. Tune Command (Command: m a)

* This command may work differently depending on model and signal.

• For Europe, Mid-East, Colombia, Asia except South Korea and Japan, Model Select channel to following physical number.

Transmission [m][a][ ][Set ID][ ][Data 00][ ][Data 01][ ][Data 02][Cr]

* Analogue Terrestrial/Cable

[Data 00][Data 01] Channel DataData 00 : High byte channel dataData 01 : Low byte channel data - 00 00 ~ 00 C7 (Decimal : 0 ~ 199)

Data 02 : Input Source (Analogue) - 00 : Terrestrial TV (ATV) - 80 : Cable TV (CATV)

9EN

GEN

GLISH


* Digital Terrestrial/Cable/Satellite

[Data 00][Data 01]: Channel DataData 00 : High Channel dataData 01 : Low Channel data - 00 00 ~ 27 0F (Decimal: 0 ~ 9999)

Data 02 : Input Source (Digital) - 10 : Terrestrial TV (DTV) - 20 : Terrestrial Radio (Radio) - 40 : Satellite TV (SDTV) - 50 : Satellite Radio (S-Radio) - 90 : Cable TV (CADTV) - a0 : Cable Radio (CA-Radio)

* Tune Command Examples:1. Tune to the analogue terrestrial (PAL) Channel 10.

Set ID = All = 00 Data 00 & 01 = Channel Data is 10 = 00 0a Data 02 = Analogue Terrestrial TV = 00 Result = ma 00 00 0a 00

2. Tune to the digital terrestrial (DVB-T) Channel 01. Set ID = All = 00 Data 00 & 01 = Channel Data is 1 = 00 01 Data 02 = Digital Terrestrial TV = 10 Result = ma 00 00 01 10

3. Tune to the satellite (DVB-S) Channel 1000. Set ID = All = 00 Data 00 & 01 = Channel Data is 1000 = 03 E8 Data 02 = Digital Satellite TV = 40 Result = ma 00 03 E8 40

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01][Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]

• For South Korea, North/Latin America except Colombia Model To tune channel to following physical/major/minor number.

Transmission [m][a][ ][0][ ][Data00][ ][Data01][ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel from the Major / Minor number, the Physical number is not required when sending a command in Digital.* Analogue Terrestrial/Cable

Data 00 : Physical Channel Number - Terrestrial (ATV) : 02~45 (Decimal: 2 ~ 69) - Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)

[Data 01 ~ 04]: Major/Minor Channel NumberData 01 & 02: xx (Don't care)Data 03 & 04: xx (Don't care)

Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) - 01 : Cable TV (CATV)* Digital Terrestrial/Cable

Data 00 : xx (Don't care)

[Data 01][Data 02]: Major Channel NumberData 01 : High byte Channel DataData 02 : Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999)[Data 03][Data 04]: Minor Channel NumberData 03 : High byte Channel DataData 04 : Low byte Channel Data

Data 05 : Input Source (Digital) - 02 : Terrestrial TV (DTV) – Use Physical Channel

Number - 06 : Cable TV (CADTV) – Use Physical Channel

Number - 22 : Terrestrial TV (DTV) – Don’t Use Physical

Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical

Channel Number - 46 : Cable TV (CADTV) – Use Major Channel

Number Only (One Part Channel)Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0).

* Tune Command Examples:1. Tune to the analogue cable (NTSC) channel 35.

Set ID = All = 00 Data 00 = Channel Data is 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = Analogue Cable TV = 01 Total = ma 00 23 00 00 00 00 01

2. Tune to the digital terrestrial (ATSC) channel 30-3. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = Digital Terrestrial TV = 22 Total = ma 00 00 00 1E 00 03 22

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01][Data 02][Data 03][Data 04][Data 05][x][a][ ][Set ID][ ][NG][Data 00][x]

• For Japan Model To tune channel to following physical/major/minor number.

Transmission [m][a][ ][0][ ][Data00][ ][Data01][ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

* Digital Terrestrial/Satellite

Data 00: xx (Don't care)

10

ENG

ENG

LISH


[Data 01][Data 02]: Major Channel NumberData 01: High byte Channel DataData 02: Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999)

[Data 03][Data 04]: Minor/Branch Channel Number (Don’t care in Satellite)

Data 03: High byte Channel DataData 04: Low byte Channel Data

Data 05 : Input Source (Digital/Satellite for Japan) - 02 : Terrestrial TV (DTV) - 07 : BS (Broadcasting Satellite) - 08 : CS1 (Communication Satellite 1) - 09 : CS2 (Communication Satellite 2)

* Tune Command Examples:1 Tune to the digital terrestrial (ISDB-T) channel 17-1.

Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 17 = 00 11 Data 03 & 04 = Minor/Branch is 1 = 00 01 Data 05 = Digital Terrestrial TV = 02 Total = ma 00 00 00 11 00 01 02

2. Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Don’t Care = 00 00 Data 05 = Digital BS TV = 07Total = ma 00 00 00 1E 00 00 07

* This feature is varied based on the model.

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01][Data 02][Data 03][Data 04][Data 05][x][a][ ][Set ID][ ][NG][Data 00][x]

18. Channel(Programme) Add/Del(Skip) (Command: m b)

To skip current channel(programme) for next time.

Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00 : Del(ATSC,ISDB)/Skip(DVB) 01 : Add

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

* Set the saved channel status to del(ATSC, ISDB)/ skip(DVB) or add.

19. Key (Command: m c) To send IR remote key code.

Transmission [m][c][ ][Set ID][ ][Data][Cr]

Data Key code - p.2.

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

20. Control Back Light (Command: m g)• For LCD TV / LED TV

To control the back light.

Transmission [m][g][ ][Set ID][ ][Data][Cr]



Control Panel Light (Command: m g)• For Plasma TV

To control the panel light.

Transmission [m][g][ ][Set ID][ ][Data][Cr]



21. Input select (Command: x b) (Main Picture Input)

To select input source for main picture.

Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data 00 : DTV 02 : Satellite DTV

ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV

01 : CADTV10 : ATV

20 : AV or AV1 21 : AV2

40 : Component1 41 : Component2

90 : HDMI1 92 : HDMI3

91 : HDMI293 : HDMI4

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

* This function depends on model and signal.

11EN

GEN

GLISH


22. 3D(Command: x t) (only 3D models) (Depending on model)

To change 3D mode for TV.

Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01][ ][Data 02][ ][Data 03][Cr]

Data Structure[Data 00] 00 : 3D On

01 : 3D Off 02 : 3D to 2D 03 : 2D to 3D

[Data 01] 00 : Top and Bottom 01 : Side by Side 02 : Check Board 03 : Frame Sequential 04 : Column interleaving 05 : Row interleaving

[Data 02] 00 : Right to Left 01 : Left to Right

[Data 03] 3D Effect(3D Depth): Min : 00 - Max : 14 (*transmit by Hexadecimal code)

* If [Data 00] is 00 (3D On), [Data 03] has no meaning.

* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data 01], [Data 02] and [Data 03] have no meaning.

* If [Data 00] is 03(2D to 3D), [Data 01] and [Data 02] have no meaning.

* All 3D pattern options ([Data 01]) may not be available according to broadcasting/video signal.

[Data 00] [Data 01] [Data 02] [Data 03]

00 O O X

01 X X X

02 X X X

03 X X O

X : don’t care

Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02][Data03][x][t][ ][Set ID][ ][NG][Data00][x]

23. Extended 3D(Command: x v) (only 3D models) (Depending on model)

To change 3D option for TV.

Transmission [x][v][ ][Set ID][ ][Data 00][ ][Data 01][Cr]

[Data 00] 3D option 00 : 3D Picture Correction 01 : 3D Depth (3D Mode is Manual Only) 02 : 3D Viewpoint 06 : 3D Color Correction 07 : 3D Sound Zooming 08 : Normal Image View 09 : 3D Mode (Genre)

[Data 01] It has own range for each 3D option determined by [Data 00].

1) When [Data 00] is 00 00 : Right to Left 01 : Left to Right

2) When [Data 00] is 01, 02Data Min: 0 - Max: 14 (*transmit by Hexadecimal

code)Data value range(0 - 20) converts Viewpoint range (-10 - +10) automatically (Depending on model)

3) When [Data 00] is 06, 07, 08 00 : Off 01 : On

4) When [Data 00] is 09

00 : Standard02 : Cinema04 : Manual

01 : Sport03 : Extreme

Ack [v][ ][Set ID][ ][OK][Data00][Data01][x][v][ ][Set ID][ ][NG][Data00][x]

OWNER’S MANUAL LED TV*Please read this manual carefully before operating your TV and retain it for...

Documents

Transcript of OWNER’S MANUAL LED TV*Please read this manual carefully before operating your TV and retain it for...