Overview Application Features and Benefits lab disc disposable filters 6 entegris, inc. dimensions...
Transcript of Overview Application Features and Benefits lab disc disposable filters 6 entegris, inc. dimensions...
OverviewSavana® Lab Disc disposable filters are specially designed for simple, quick and efficient filtration of liquids used in laboratory, pilot and small-scale life science applications.
Application • Laboratory, pilot and small-scale life science
applications
Features and Benefits• Three different membrane options
(PES, PTFE and UPE) with retention ratings from 0.05 µm to 1.2 µm
• Filter sizes ranging from 13 mm to 65 mm diameter
• Many inlet/outlet fitting options including Tri-Clamp,® hose-barb, quick coupling, BD Luer-Lok™ and NPT
• Both polypropylene and gamma-stable polypropylene shells with compact design which minimizes hold-up volume
• No adhesives, binders or surfactants are used in manufacturing so there is no contamination risk
• Units are thermally sealed, ensuring integrity and no exposure to hazardous chemicals
• Filters can be autoclaved up to 10 cycles at 125°C (257°F) for 30 minutes (must not be in-situ steam sterilized)
• Discs are manufactured from materials that conform to requirements of 21 CFR Part 177 of the U.S. Code of Federal Regulations
• Membranes are in compliance with USP Class VI Biological Test for Plastics
Lab scale disposable filters for life science applications
SAVANA® LAB DISC DISPOSABLE FILTERS
CRITICAL MATERIALS HANDLING
SpecificationsMaterials: Membrane Hydrophilic PES, hydrophobic PTFE and UPE
Shell Polypropylene and gamma-stable polypropylene
Fitting type: BD Luer-Lok, hose barb, NPT, compression, quick coupling, Tri-Clamp
Operating conditions: Maximum operating pressure 0.55 MPa (PP shell)
0.3 MPa (Gamma-stable PP shell)
Maximum forward differential pressure 0.4 MPa @ 25°C (77°F)
Maximum reverse differential pressure 0.2 MPa @ 25°C (77°F)
Maximum operating temperature 60°C (140°F)
SAVANA LAB DISC DISPOSABLE FILTERS
2 ENTEGRIS, INC.
Dimensions
Part Number Inlet Fitting Outlet Fitting A: Size (mm)
SVLP13 XXXX AA XXXX 1⁄ 16” hose barb 1⁄ 16” hose barb 15
SVLP13 XXXX BB XXXX 1⁄ 8” hose barb 1⁄ 8” hose barb 24
SVLP13 XXXX QQ XXXX BD Luer-Lok female BD Luer-Lok female 19
SVLP13 XXXX RR XXXX BD Luer-Lok male BD Luer-Lok male 24
SVLP13 XXXX SS XXXX BD Luer-Lok male slip BD Luer-Lok male slip 20
Ø 16 mm
A 3.7 mm
SVLP13 XXXX AA XXX SVLP13 XXXX BB XXX SVLP13 XXXX QQ XXX SVLP13 XXXX RR XXX SVLP13 XXXX SS XXX
Ø 13 mm Disc Disposable FilterOrdering Information
Filter Media
Pore Size (µm)
PTFE Membrane UPE Membrane PES Membrane
SVLP13 A = PTFE membrane
B = UPE membrane
F = PES membrane
020 = 0.2
100 = 1.0
300 = 3.0
020 = 0.2 005 = 0.05
010 = 0.1
020 = 0.2
045 = 0.45
065 = 0.65
080 = 0.8
120 = 1.2
Inlet Fitting Outlet Fitting Shell Material Quantity
A = 1⁄ 16” hose barb
B = 1⁄ 8” hose barb
Q = BD Luer-Lok female
R = BD Luer-Lok male
S = BD Luer-Lok male slip
A = 1⁄ 16” hose barb
B = 1⁄ 8” hose barb
Q = BD Luer-Lok female
R = BD Luer-Lok male
S = BD Luer-Lok male slip
A = PP
C = Gamma stable PP
25 = 25/pack
Example: SVLP13F010RSA25 Size = 13 mm
Filter media = PES membrane
Pore size = 0.1 µm
Inlet fitting = BD Luer-Lok male
Outlet fitting = BD Luer-Lok male slip
Shell material = PP
Quantity = 25/pack
Note: The PE shell utilizes a UPE membrane.
SAVANA LAB DISC DISPOSABLE FILTERS
ENTEGRIS, INC. 3
Filter Media
Pore Size (µm)
PTFE Membrane UPE Membrane PES Membrane
SVLP25 A = PTFE membrane
B = UPE membrane
F = PES membrane
020 = 0.2
100 = 1.0
300 = 3.0
020 = 0.2 005 = 0.05
010 = 0.1
020 = 0.2
045 = 0.45
065 = 0.65
080 = 0.8
120 = 1.2
Inlet Fitting Outlet Fitting Shell Material QuantityQuick Coupling O-ring
A = 1⁄ 16” - 3⁄ 32” hose barb
F = 1⁄ 8” compression
B = 1⁄ 8” - 3⁄ 16” hose barb
H = 1⁄ 8” MNPT
X = 1⁄ 8” male quick coupling
C = 3⁄ 16” - 1⁄ 4” hose barb
D = 1⁄ 4” - 3⁄ 8” hose barb
Q = BD Luer-Lok female
R = BD Luer-Lok male
S = BD Luer-Lok male slip
9 = 1⁄ 4”-28 thread female
A = 1⁄ 16” - 3⁄ 32” hose barb
F = 1⁄ 8” compression
B = 1⁄ 8” - 3⁄ 16” hose barb
H = 1⁄ 8” MNPT
X = 1⁄ 8” male quick coupling
C = 3⁄ 16” - 1⁄ 4” hose barb
D = 1⁄ 4” - 3⁄ 8” hose barb
Q = BD Luer-Lok female
R = BD Luer-Lok male
S = BD Luer-Lok male slip
9 = 1⁄ 4”-28 thread female
A = PP
C = Gamma stable PP
25 = 25/pack Blank = other fitting
S = Silicon
E = EPDM
N = NBR
V = FKM
Ø 25 mm Disc Disposable FilterOrdering Information
Example: SVLP25F010RSA25 Size = 25 mm
Filter media = PES membrane
Pore size = 0.1 µm
Inlet fitting = BD Luer-Lok male
Outlet fitting = BD Luer-Lok male slip
Shell material = PP
Quantity = 25/pack
Note: The PE shell utilizes a UPE membrane.
SAVANA LAB DISC DISPOSABLE FILTERS
4 ENTEGRIS, INC.
Dimensions
Ø 33 mm
A
5.5 mm
SVLP25 XXXX FF XXXX SVLP25 XXXX AA XXXX SVLP25 XXXX BB XXXX SVLP25 XXXX CC XXXX
SVLP25 XXXX DD XXXX SVLP25 XXXX HH XXXX SVLP25 XXXX XX XXXX
SVLP25 XXXX RR XXXX SVLP25 XXXX QQ XXXX SVLP25 XXXX 99 XXXX
SVLP25 XXXX SS XXXX
Part Number Inlet Fitting Outlet Fitting A: Size (mm)
SVLP25 XXXX FF XXXX 1⁄ 8” compression 1⁄ 8” compression 31
SVLP25 XXXX AA XXXX 1⁄ 16” hose barb 1⁄ 16” hose barb 25
SVLP25 XXXX BB XXXX 1⁄ 8” hose barb 1⁄ 8” hose barb 31
SVLP25 XXXX CC XXXX 3⁄ 16” hose barb 3⁄ 16” hose barb 31
SVLP25 XXXX DD XXXX 1⁄ 4” hose barb 1⁄ 4” hose barb 33
SVLP25 XXXX HH XXXX 1⁄ 8” MNPT 1⁄ 8” MNPT 31
SVLP25 XXXX XX XXXX 1⁄ 8” male quick coupling 1⁄ 8” male quick coupling 40
SVLP25 XXXX SS XXXX BD Luer-Lok male slip BD Luer-Lok male slip 33
SVLP25 XXXX RR XXXX BD Luer-Lok male BD Luer-Lok male 30
SVLP25 XXXX QQ XXXX BD Luer-Lok female BD Luer-Lok female 21
SVLP25 XXXX 99 XXXX 1⁄ 4”-28UNF-2B 1⁄ 4”-28UNF-2B 32
SAVANA LAB DISC DISPOSABLE FILTERS
ENTEGRIS, INC. 5
Filter Media
Pore Size (µm)
PTFE Membrane UPE Membrane PES Membrane
SVLP40 A = PTFE membrane
B = UPE membrane
F = PES membrane
020 = 0.2
100 = 1.0
300 = 3.0
020 = 0.2 005 = 0.05
010 = 0.1
020 = 0.2
045 = 0.45
065 = 0.65
080 = 0.8
120 = 1.2
Inlet Fitting Outlet Fitting Shell Material QuantityQuick Coupling O-ring
A = 1⁄ 16” - 3⁄ 32” hose barb
F = 1⁄ 8” compression
B = 1⁄ 8” - 3⁄ 16” hose barb
H = 1⁄ 8” MNPT
X = 1⁄ 8” male quick coupling
C = 3⁄ 16” - 1⁄ 4” hose barb
D = 1⁄ 4” - 3⁄ 8” hose barb
Q = BD Luer-Lok female
R = BD Luer-Lok male
S = BD Luer-Lok male slip
9 = 1⁄ 4”-28 thread female
A = 1⁄ 16” - 3⁄ 32” hose barb
F = 1⁄ 8” compression
B = 1⁄ 8” - 3⁄ 16” hose barb
H = 1⁄ 8” MNPT
X = 1⁄ 8” male quick coupling
C = 3⁄ 16” - 1⁄ 4” hose barb
D = 1⁄ 4” - 3⁄ 8” hose barb
Q = BD Luer-Lok female
R = BD Luer-Lok male
S = BD Luer-Lok male slip
9 = 1⁄ 4”-28 thread female
A = PP
C = Gamma stable PP
10 = 10/pack Blank = other fitting
S = Silicon
E = EPDM
N = NBR
V = FKM
Ø 40 mm Disc Disposable FilterOrdering Information
Example: SVLP40F010RSA10 Size = 40 mm
Filter media = PES membrane
Pore size = 0.1 µm
Inlet fitting = BD Luer-Lok male
Outlet fitting = BD Luer-Lok male slip
Shell material = PP
Quantity = 10/pack
Note: The PE shell utilizes a UPE membrane.
SAVANA LAB DISC DISPOSABLE FILTERS
6 ENTEGRIS, INC.
Dimensions
SVLP40 XXXX AA XXXX SVLP40 XXXX BB XXXX SVLP40 XXXX CC XXXX SVLP40 XXXX DD XXXX
SVLP40 XXXX QQ XXXX SVLP40 XXXX SS XXXX SVLP40 XXXX FF XXXX
SVLP40 XXXX XX XXXX SVLP40 XXXX RR XXXX SVLP40 XXXX 99 XXXX
SVLP40 XXXX HH XXXX
Ø 45.5 mm
A
8 mm
Part Number Inlet Fitting Outlet Fitting A: Size (mm)
SVLP40 XXXX AA XXXX 1⁄ 16” hose barb 1⁄ 16” hose barb 27
SVLP40 XXXX BB XXXX 1⁄ 8” hose barb 1⁄ 8” hose barb 33
SVLP40 XXXX CC XXXX 3⁄ 16” hose barb 3⁄ 16” hose barb 33
SVLP40 XXXX DD XXXX 1⁄ 4” hose barb 1⁄ 4” hose barb 35
SVLP40 XXXX QQ XXXX BD Luer-Lok female BD Luer-Lok female 20
SVLP40 XXXX SS XXXX BD Luer-Lok male slip BD Luer-Lok male slip 35
SVLP40 XXXX FF XXXX 1⁄ 8” compression 1⁄ 8” compression 33
SVLP40 XXXX HH XXXX 1⁄ 8” MNPT 1⁄ 8” MNPT 33
SVLP40 XXXX XX XXXX 1⁄ 8” male quick coupling 1⁄ 8” male quick coupling 40
SVLP40 XXXX RR XXXX BD Luer-Lok male BD Luer-Lok male 35
SVLP40 XXXX 99 XXXX 1⁄ 4”-28UNF-2B 1⁄ 4”-28UNF-2B 34
SAVANA LAB DISC DISPOSABLE FILTERS
ENTEGRIS, INC. 7
Filter Media
Pore Size (µm)
PTFE Membrane UPE Membrane PES Membrane
SVLP50 A = PTFE membrane
B = UPE membrane
F = PES membrane
020 = 0.2
100 = 1.0
300 = 3.0
020 = 0.2 005 = 0.05
010 = 0.1
020 = 0.2
045 = 0.45
065 = 0.65
080 = 0.8
120 = 1.2
Inlet Fitting Outlet Fitting Shell Material QuantityQuick Coupling O-ring
H = 1⁄ 8” MNPT
M = 1⁄ 8” FNPT
B = 1⁄ 8” - 1⁄ 4” hose barb
X = 1⁄ 8” male quick coupling
T = 1⁄ 8” female quick coupling
G = 1⁄ 4” compression
D = 1⁄ 4” - 3⁄ 8” hose barb
J = 1⁄ 4” MNPT
Q = BD Luer-Lok female
N = 1⁄ 4” FNPT
8 = 3⁄ 8” tube seal
H = 1⁄ 8” MNPT
M = 1⁄ 8” FNPT
B = 1⁄ 8” - 1⁄ 4” hose barb
X = 1⁄ 8” male quick coupling
T = 1⁄ 8” female quick coupling
G = 1⁄ 4” compression
D = 1⁄ 4” - 3⁄ 8” hose barb
J = 1⁄ 4” MNPT
Q = BD Luer-Lok female
N = 1⁄ 4” FNPT
8 = 3⁄ 8” tube seal
A = PP
C = Gamma stable PP
10 = 10/pack Blank = other fitting
S = Silicon
E = EPDM
N = NBR
V = FKM
Ø 50 mm Disc Disposable FilterOrdering Information
Example: SVLP50F010BQA10 Size = 50 mm
Filter media = PES membrane
Pore size = 0.1 µm
Inlet fitting = 1⁄ 8” - 1⁄ 4” hose barb
Outlet fitting = BD Luer-Lok female
Shell material = PP
Quantity = 10/pack
Note: The PE shell utilizes a UPE membrane.
SAVANA LAB DISC DISPOSABLE FILTERS
8 ENTEGRIS, INC.
Dimensions
SVLP50 XXXX GG XXXX SVLP50 XXXX DD XXXX SVLP50 XXXX HH XXXX SVLP50 XXXX MM XXXX
SVLP50 XXXX JJ XXXX SVLP50 XXXX XX XXXX SVLP50 XXXX TT XXXX
SVLP50 XXXX QQ XXXX SVLP50 XXXX NN XXXX SVLP50 XXXX BB XXXX
SVLP50 XXXX 88 XXXX
8 mm
Ø 54 mm
A
Part Number Inlet Fitting Outlet Fitting A: Size (mm)
SVLP50 XXXX GG XXXX 1⁄ 4” compression 1⁄ 4” compression 41
SVLP50 XXXX DD XXXX 1⁄ 4” hose barb 1⁄ 4” hose barb 46
SVLP50 XXXX HH XXXX 1⁄ 8” MNPT 1⁄ 8” MNPT 36
SVLP50 XXXX MM XXXX 1⁄ 8” FNPT 1⁄ 8” FNPT 38
SVLP50 XXXX JJ XXXX 1⁄ 4” MNPT 1⁄ 4” MNPT 45
SVLP50 XXXX XX XXXX 1⁄ 8” male quick coupling 1⁄ 8” male quick coupling 42
SVLP50 XXXX TT XXXX 1⁄ 8” female quick coupling 1⁄ 8” female quick coupling 61
SVLP50 XXXX 88 XXXX 3⁄ 8” tube seal 3⁄ 8” tube seal 54
SVLP50 XXXX QQ XXXX BD Luer-Lok female BD Luer-Lok female 28
SVLP50 XXXX NN XXXX 1⁄ 4” FNPT 1⁄ 4” FNPT 41
SVLP50 XXXX BB XXXX 1⁄ 8” hose barb 1⁄ 8” hose barb 37
SAVANA LAB DISC DISPOSABLE FILTERS
ENTEGRIS, INC. 9
Filter Media
Pore Size (µm)
PTFE Membrane UPE Membrane PES Membrane
SVLP65 A = PTFE membraneB = UPE membraneF = PES membrane
020 = 0.2100 = 1.0300 = 3.0
020 = 0.2 005 = 0.05010 = 0.1020 = 0.2045 = 0.45065 = 0.65080 = 0.8120 = 1.2
Inlet Fitting Outlet Fitting Shell Material Vent QuantityQuick Coupling O-ring
B = 1⁄ 8” hose barbM = 1⁄ 8” FNPTX = 1⁄ 8” male
quick couplingT = 1⁄ 8” female
quick couplingD = 1⁄ 4” - 5⁄ 16” hose
barbJ = 1⁄ 4” MNPTN = 1⁄ 4” FNPTY = 1⁄ 4” male quick
coupling for metal latch
W = 1⁄ 4” female quick coupling with metal latch
E = 5⁄ 16” - 3⁄ 8” hose barb
K = 3⁄ 8” MNPTP = 3⁄ 8” FNPTL = 1⁄ 2” MNPTQ = BD Luer-Lok
female5 = 1⁄ 2” Tri-Clamp6 = 11⁄ 2” Tri-Clamp
B = 1⁄ 8” hose barbM = 1⁄ 8” FNPTX = 1⁄ 8” male
quick couplingT = 1⁄ 8” female
quick couplingD = 1⁄ 4” - 5⁄ 16” hose
barbJ = 1⁄ 4” MNPTN = 1⁄ 4” FNPTY = 1⁄ 4” male quick
coupling for metal latch
W = 1⁄ 4” female quick coupling with metal latch
E = 5⁄ 16” - 3⁄ 8” hose barb
K = 3⁄ 8” MNPTP = 3⁄ 8” FNPTL = 1⁄ 2” MNPTQ = BD Luer-Lok
female5 = 1⁄ 2” Tri-Clamp6 = 11⁄ 2” Tri-Clamp
A = PP
C = Gamma stable PP
A = with ventB = without
vent
5 = 5/pack Blank = other fitting
S = Silicon
E = EPDM
N = NBR
V = FKM
Ø 65 mm Disc Disposable FilterOrdering Information
Example: SVLP65F010BQAA05 Size = 65 mm Filter media = PES membrane Pore size = 0.1 µm Inlet fitting = 1⁄ 8” hose barb Outlet fitting = BD Luer-Lok female Shell material = PP Vent = with vent Quantity = 5/pack
Note: The PE shell utilizes a UPE membrane.
SAVANA LAB DISC DISPOSABLE FILTERS
10 ENTEGRIS, INC.
Dimensions
SVLP65 XXXX BB XXXX SVLP65 XXXX DD XXXX SVLP65 XXXX EE XXXX SVLP65 XXXX JJ XXXX
SVLP65 XXXX NN XXXX SVLP65 XXXX KK XXXX SVLP65 XXXX PP XXXX
SVLP65 XXXX 55 XXXX SVLP65 XXXX 66 XXXX SVLP65 XXXX QQ XXXX
SVLP65 XXXX LL XXXX
SVLP65 XXXX XX XXXX
SVLP65 XXXX YY XXXX SVLP65 XXXX MM XXXX SVLP65 XXXX TT XXXX SVLP65 XXXX WW XXXX
Ø 72 mm
10 mm
19 mm
A
Part Number Inlet Fitting Outlet Fitting A: Size (mm)
SVLP65 XXXX BB XXXX 1⁄ 8” hose barb 1⁄ 8” hose barb 45
SVLP65 XXXX DD XXXX 1⁄ 4” hose barb 1⁄ 4” hose barb 55
SVLP65 XXXX EE XXXX 5⁄ 16” hose barb 5⁄ 16” hose barb 59
SVLP65 XXXX JJ XXXX 1⁄ 4” MNPT 1⁄ 4” MNPT 51
SVLP65 XXXX NN XXXX 1⁄ 4” FNPT 1⁄ 4” FNPT 52
SVLP65 XXXX KK XXXX 3⁄ 8” MNPT 3⁄ 8” MNPT 55
SVLP65 XXXX PP XXXX 3⁄ 8” FNPT 3⁄ 8” FNPT 60
SVLP65 XXXX LL XXXX 1⁄ 2” MNPT 1⁄ 2” MNPT 74
SVLP65 XXXX 55 XXXX 1⁄ 2” Tri-Clamp 1⁄ 2” Tri-Clamp 69
SVLP65 XXXX 66 XXXX 11⁄ 2” Tri-Clamp 11⁄ 2” Tri-Clamp 76
SVLP65 XXXX QQ XXXX BD Luer-Lok female BD Luer-Lok female 38
SVLP65 XXXX XX XXXX 1⁄ 8” male quick coupling 1⁄ 8” male quick coupling 45
SVLP65 XXXX YY XXXX 1⁄ 4” male quick coupling 1⁄ 4” male quick coupling 58
SVLP65 XXXX MM XXXX 1⁄ 8” FNPT 1⁄ 8” FNPT 52
SVLP65 XXXX TT XXXX 1⁄ 8” female quick coupling 1⁄ 8” female quick coupling 52
SVLP65 XXXX WW XXXX 1⁄ 4” female quick coupling 1⁄ 4” female quick coupling 50
ENTEGRIS, INC. Corporate Headquarters | 129 Concord Road | Billerica, MA 01821 USACustomer Service Tel. +1 952 556 4181 | Customer Service Fax +1 952 556 8022 In North America 800 394 4083 | www.entegris.com
©2015 Entegris, Inc. All rights reserved Printed in USA 4422-7818ENT-0415
For More InformationPlease call your Regional Customer Service Center today to learn what Entegris can do for you. Visit www.entegris.com and select the Customer Service link for the center nearest you.
Terms and Conditions of SaleAll purchases are subject to Entegris’ Terms and Conditions of Sale. To view and print this information, visit www.entegris.com and select the Legal Notices link from the footer.
Entegris®, the Entegris Rings Design®, Creating a Material Advantage® and Savana® are registered trademarks of Entegris, Inc. BD Luer-Lok™ is a trademark of Becton Dickinson and Company. Tri-Clamp® is a registered trademark of Tri-Clover, Inc.