Overseeder - Land Pride · Ref. Part No. Part Description Comments Revision dwg15349 Drawing Image...

OverseederOS1548 & OS1572

26780 308-303PParts Manual

Read the Operator's Manual entirely. Whenyou see this symbol, the subsequentinstructions and warnings are serious - followwithout exception.Your life and the lives ofothers depend on it!

© Copyright 2020 Printed 06/05/20

Cover photo may show optional equipment notsupplied with standard unit.

Table of Contents Part Number Index

Section 1: Introduction.................................................4Using This Manual...............................................................4Manual Replacement Information.......................................4Manual Revisions................................................................4Touch-up Paint....................................................................4Hardware Legend................................................................5Replacement Hardware......................................................5Serial Numbers...................................................................5Part Number Service Coding..............................................5

OS15 SERIESSection 2: Frame............................................................6

Box To Frame Assembly......................................................6Hitch and Frame Assembly (S/N 35088-)............................8Hitch and Frame Assembly (S/N 35088-)..........................10Hitch and Frame Assembly (S/N 35089 to 89962)............12Hitch and Frame Assembly (S/N 35089+).........................14Hitch and Frame Assembly (S/N 89963+).........................16Packer Wheel Assemblies.................................................18Rear Roller Arm Assembly (S/N 166723-)........................20Rear Roller Arm Assembly (S/N 166724+).......................22

Section 3: Boxes..........................................................24Bolt-on Agitator Extension Kit OS.....................................24Box Assembly (S/N 124695-) (S/N 222276 To 543361).....26Box Assembly (S/N 124696 To 222275)............................28Box Assembly (S/N 543362+)...........................................30Feeder Cup Assembly.......................................................34Seed Rate Adjustment Assembly (S/N 35088-)................36Seed Rate Adjustment Assembly (S/N 35089+)...............38Seeder Light Kit S/N 1136115+........................................40

Section 4: Drives.........................................................42Gauge Wheel Drive...........................................................42Gauge Wheel Link.............................................................46Gauge Wheel Non Drive...................................................48Gearbox (826-010C) Curtis (S/N 35088-).........................50Gearbox (826-010C) OMNI (S/N 35088-).........................52Gearbox (826-029C) Comer.............................................54Gearbox (826-029C) Curtis...............................................56Gearbox (826-029C) Curtis I.D. Tag No. 924514)..............58Rear Roller Drive Assembly (S/N 166723-)......................60Rear Roller Drive Assembly (S/N 166724+)......................62Rotor Drive Assembly (S/N 89962-)..................................66Rotor Drive Assembly (S/N 89963 To 166723).................70Rotor Drive Assembly (S/N 166724+)...............................74Rotor Drive Assembly (S/N 166724+)...............................78Rotor Drive Assembly (S/N 35088-)..................................82Rotor Drive Assembly (S/N 35089 To 166723).................86

Section 5: Drivelines...................................................89Driveline (826-891C) Comer.............................................90

Driveline Slip Clutch (1465603) Eurocardan.....................92Driveline Slip Clutch (1465703) Eurocardan.....................94Driveline Slip Clutch (317189) Waltersheid.......................96Driveline Slip Clutch (318851) Waltersheid.......................98Driveline Slip Clutch (826-006C) Waltersheid.................100Driveline Slip Clutch (826-025C) Eurocardan.................102Driveline Slip Clutch (826-025C) Waltersheid.................104

Section 6: Decals.......................................................106Decal Placement.............................................................106Touch-up Paints - LP.......................................................110

Section 7: Options & Accessories...........................112Front Roller Assembly.....................................................112OS15 Small Seeds Box Bundle......................................114Slit Seeder Assembly......................................................116Small Grass Seeds Box Assembly (S/N 124695-) (S/N

222276+)..................................................................118Small Grass Seeds Box Assembly (S/N 124696 To

222275).....................................................................120Small Grass Seeds Drive Assembly (S/N 543361-)........122Small Grass Seeds Drive Assembly (S/N 543362+).......124Small Grass Seeds Y-Tube..............................................126SMV Sign........................................................................128Tine Option Assembly.....................................................130

Part Number Index.....................................................132

© Copyright 2020. All rights reserved.

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied.While every precaution has been taken in the preparation of this manual,Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. LandPride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflectthe product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended forordering parts only.

Land Pride is registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

2 OS1548 & OS1572 Overseeder 308-303P 06/05/20


Table of Contents

OS15 SERIES

BBolt-on Agitator Extension Kit OS................................24Box Assembly (S/N 124695-) (S/N 222276 To

543361)..................................................................26Box Assembly (S/N 124696 To 222275).......................28Box Assembly (S/N 543362+)......................................30Box To Frame Assembly.................................................6

DDecal Placement........................................................106Driveline (826-891C) Comer........................................90Driveline Slip Clutch (1465603) Eurocardan................92Driveline Slip Clutch (1465703) Eurocardan................94Driveline Slip Clutch (317189) Waltersheid..................96Driveline Slip Clutch (318851) Waltersheid..................98Driveline Slip Clutch (826-006C) Waltersheid............100Driveline Slip Clutch (826-025C) Eurocardan............102Driveline Slip Clutch (826-025C) Waltersheid............104

FFeeder Cup Assembly..................................................34Front Roller Assembly................................................112

GGauge Wheel Drive......................................................42Gauge Wheel Link........................................................46Gauge Wheel Non Drive..............................................48Gearbox (826-010C) Curtis (S/N 35088-)....................50Gearbox (826-010C) OMNI (S/N 35088-)....................52Gearbox (826-029C) Comer.........................................54Gearbox (826-029C) Curtis..........................................56Gearbox (826-029C) Curtis I.D. Tag No. 924514).........58

HHitch and Frame Assembly (S/N 35088-).......................8Hitch and Frame Assembly (S/N 35088-).....................10Hitch and Frame Assembly (S/N 35089 to 89962).......12Hitch and Frame Assembly (S/N 35089+)....................14Hitch and Frame Assembly (S/N 89963+)....................16

OOS15 Small Seeds Box Bundle..................................114

PPacker Wheel Assemblies............................................18

RRear Roller Arm Assembly (S/N 166723-)...................20Rear Roller Arm Assembly (S/N 166724+)..................22Rear Roller Drive Assembly (S/N 166723-)..................60Rear Roller Drive Assembly (S/N 166724+).................62Rotor Drive Assembly (S/N 89962-).............................66Rotor Drive Assembly (S/N 89963 To 166723).............70Rotor Drive Assembly (S/N 166724+)..........................74

Rotor Drive Assembly (S/N 166724+)..........................78Rotor Drive Assembly (S/N 35088-).............................82Rotor Drive Assembly (S/N 35089 To 166723).............86

SSeed Rate Adjustment Assembly (S/N 35088-)...........36Seed Rate Adjustment Assembly (S/N 35089+)..........38Seeder Light Kit S/N 1136115+....................................40Slit Seeder Assembly.................................................116Small Grass Seeds Box Assembly (S/N 124695-) (S/N

222276+)..............................................................118Small Grass Seeds Box Assembly (S/N 124696 To

222275)................................................................120Small Grass Seeds Drive Assembly (S/N 543361-)....122Small Grass Seeds Drive Assembly (S/N 543362+)...124Small Grass Seeds Y-Tube.........................................126SMV Sign...................................................................128

TTine Option Assembly................................................130Touch-up Paints - LP..................................................110


Alphabetized Table of Contents

06/05/20 OS1548 & OS1572 Overseeder 308-303P 3

15380


Table of Contents Part Number IndexLand Pride Section 2: FrameOS15 SERIES

Box To Frame Assembly

Applies to OS1548, OS1572

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg15380OUTLET CHANNEL WELDMENT 48308-086H1.48" OUTLET CHANNEL ORANGE308-086H821.OUTLET CHANNEL WELDMENT 72308-020H1.72" OUTLET CHANNEL ORANGE308-020H821.

Rev. 3SEED HOSE OS1548 & OS1572308-340D2.Rev 2; Use up stockRPBY308-340D308-250D2.Rev 1; Use up stockRPBY 308-340D308-076D2.

HFSS 1/4-20X1/2 GR5802-148C3.NUT HEX 3/8-16 PLT803-014C4.WASHER LOCK SPRING 3/8 PLT804-013C5.

Rev. 2HHCS 3/8-16X1 GR5802-017C6.Rev 1; Use up stockHHCS 3/8-16X3/4 GR5802-014C6.


Table of Contents Part Number IndexSection 2: Frame Land PrideOS15 SERIES

Box To Frame Assembly


15349



Hitch and Frame Assembly (S/N 35088-)

Applies to OS1548


Drawing Image Numberdwg15349Rev. 2PIN 7/8 OD X 4 15/32 USABLE805-207C1.Rev 1; Use up stock(RPBY 805-207C)303-044D1.

PIN ROLL 1/4X1 3/4805-041C2.PIN LYNCH 5/16 X 1 3/4805-015C3.48 OVERSEEDER FRAME WELDMENT308-075H4.HHCS 1/2-13X1 1/4 GR5802-034C5.

Rev. 2 not compat. w/Rev. 1.(S/N 21491+) Hitch attaches to insideof mounting bar on deck.

RH TOP HITCH WELDMENT308-114H6.

Rev. 1(S/N 21490-) ShownUPPER LINK MOUNT R.H.308-009H6.NUT HEX 5/8-11 PLT803-021C7.WASHER LOCK SPRING 5/8 PLT804-022C8.

Rev. 2 not compat. w/Rev. 1.(S/N 21491+)SUPPORT BRACE308-054D9.Rev. 1(S/N 21490-)PTO GUARD308-189D9.

HHCS 1/4-20X5/8 GR5802-078C10.WASHER FLAT 1/4 SAE PLT804-007C11.TOP SPACER HEAVY HITCH RTA15311-093D12.HHCS 5/8-11X3 3/4 GR5802-153C13.


LH TOP HITCH WELDMENT OS1548308-106H14.

Rev. 1(S/N 21490-) ShownLH TOP HITCH WELDMENT OS1548308-115H14.WASHER LOCK SPRING 1/4 PLT804-006C15.NUT HEX 1/4-20 PLT803-006C16.HOLE PLUG 2 DIA890-020C17.WASHER LOCK SPRING 1/2 PLT804-015C18.NUT HEX 1/2-13 PLT803-020C19.




Applies to OS1548

15350




Applies to OS1572


Drawing Image Numberdwg15350HOLE PLUG 2 DIA890-020C1.72 OS FRAME WELDMENT308-007H2.PIN ROLL 1/4X1 3/4805-041C3.LOWER HITCH PIN308-183D4.PIN LYNCH 5/16 X 1 3/4805-015C5.NUT HEX 1/2-13 PLT803-020C6.WASHER LOCK SPRING 1/2 PLT804-015C7.


RH TOP HITCH WELDMENT308-114H8.

Rev. 1(S/N 21490-) ShownUPPER LINK MOUNT R.H.308-009H8.HHCS 1/2-13X1 1/4 GR5802-034C9.NUT HEX 5/8-11 PLT803-021C10.WASHER LOCK SPRING 5/8 PLT804-022C11.TOP SPACER HEAVY HITCH RTA15311-093D12.


LH TOP HITCH WELDMENT OS1572308-116H13.

Rev. 1(S/N 21490-) ShownUPPER LINK MOUNT L.H.308-008H13.HHCS 5/8-11X3 3/4 GR5802-153C14.NUT HEX 1/4-20 PLT803-006C15.WASHER LOCK SPRING 1/4 PLT804-006C16.WASHER FLAT 1/4 SAE PLT804-007C17.

Rev. 2 not compat. w/Rev. 1.(S/N 21491+)PTO GUARD308-189D18.Rev. 1(S/N 21490-)SUPPORT BRACE308-054D18.

HHCS 1/4-20X5/8 GR5802-078C19.Rev. 2 not compat. w/Rev. 1.(S/N 21491+)DRIVE SHAFT GUARD OS1572308-190D20.Rev. 1(S/N 21490-)GEARBOX SHAFT GUARD308-043D20.

Includes 1 each of items 3 & 4.LOWER HITCH PIN 7/8 X 5 5/8303-017S20.




Applies to OS1572

10515



Hitch and Frame Assembly (S/N 35089 to 89962)

Applies to OS1548


Drawing Image Numberdwg10515FRAME WELDMENT OS1548308-170H1.NUT HEX 5/8-11 PLT803-021C2.WASHER LOCK SPRING 5/8 PLT804-022C3.RH TOP HITCH WELDMENT OS1548308-175E4.TOP PTO GUARD308-254D5.TOP SPACER HEAVY HITCH RTA15311-093D6.STUD 1/4 TURN WING HD #85-360800-096C7.HHCS 5/16-18X3/4 GR5802-007C8.WASHER LOCK SPRING 5/16 PLT804-009C9.BOTTOM PTO GUARD STRIP308-255D10.RETAINER SPLIT RING #85800-098C11.RECPTCLE 1/4 TURN CLIP ON #85800-097C12.LH TOP HITCH WELDMENT OS1548308-176E13.HHCS 5/8-11X3 3/4 GR5802-153C14.WASHER LOCK SPRING 1/2 PLT804-015C15.NUT HEX 1/2-13 PLT803-020C16.PIN LYNCH 5/16 X 1 3/4805-015C17.

Rev. 2PIN 7/8 OD X 4 15/32 USABLE805-207C18.Rev 1; Use up stockRPBY 805-207C303-044D18.

PIN ROLL 1/4X1 3/4805-041C19.HOLE PLUG 2 DIA890-020C20.HHCS 1/2-13X1 1/4 GR5802-034C21.

Includes 1 each of items 18 & 19.LOWER HITCH PIN 7/8 X 5 5/8303-017S21.



Hitch and Frame Assembly (S/N 35089 to 89962)

Applies to OS1548

10507



Hitch and Frame Assembly (S/N 35089+)

Applies to OS1572


Drawing Image Numberdwg10507(S/N 166724+)FRAME WELDMENT 0S1572308-314H1.

FRAME WELDMENT OS1572 ORANGE308-314H821.Rev 1; Use up stock(S/N 35089166723)FRAME WELDMENT OS1572308-171H1.

RH TOP HITCH WELDMENT OS1572308-178E2.RH TOP HITCH 0S1572 ORANGE308-178E822.NUT HEX 5/8-11 PLT803-021C3.WASHER LOCK SPRING 5/8 PLT804-022C4.TOP PTO GUARD308-254D5.

(S/N 271992-)TOP SPACER HEAVY HITCH RTA15311-093D6.(S/N 271992-)BOTTOM PTO GUARD STRIP308-255D7.

STUD 1/4 TURN WING HD #85-360800-096C8.(S/N 271992-)HHCS 5/16-18X3/4 GR5802-007C9.(S/N 271992-)WASHER LOCK SPRING 5/16 PLT804-009C10.

LH TOP HITCH WELDMENT OS1572308-177E11.LH TOP HITCH OS1572 ORANGE308-177E8211.HHCS 5/8-11X3 3/4 GR5802-153C12.RETAINER SPLIT RING #85800-098C13.RECPTCLE 1/4 TURN CLIP ON #85800-097C14.HHCS 1/2-13X1 1/4 GR5802-034C15.SHAFT GUARD TUBE OS1572308-249D16.SHAFT GUARD TUBE OS1572 ORANGE308-249D8216.WASHER LOCK SPRING 1/2 PLT804-015C17.NUT HEX 1/2-13 PLT803-020C18.HOLE PLUG 2 DIA890-020C19.PIN ROLL 1/4X1 3/4805-041C20.LOWER HITCH PIN308-183D21.PIN LYNCH 5/16 X 1 3/4805-015C22.GREASE ZERK STRAIGHT 1/4-28800-001C23.

(S/N 271992-)WASHER FLAT 5/16 SAE PLT804-036C24.BUSHING PIVOT PIN 1 1/2 ID890-126C25.

Includes 1 each of items 21 & 22.LOWER HITCH PIN ASS'Y OS1572308-110S26.(S/N 271993+)OS GB/DRIVELINE GUARD WELDMENT308-345H27.

OS GB/DRIVELINE GUARD ORANGE308-345H8227.(S/N 271993+)SPACER 1 1/4OD X 25/32ID X 2LG308-400D28.

Rev. 2(S/N 306787+)HHCS 3/4-10X4 GR5 FTHD802-067C29.Rev 1; Use up stock(S/N 271993306786)HHCS 3/4-10X4 GR5802-068C29.

(S/N 271993+)WASHER LOCK SPRING 3/4 PLT804-023C30.(S/N 271993+)NUT HEX 3/4-10 PLT803-027C31.(S/N 271993+)HHCS 1/4-20X1/2 GR2802-283C32.(S/N 271993+)HALF-CLIP 5/16 DIA. HOSE890-266C33.(S/N 271993+)RETAINER SPLIT RING #85800-098C34.(S/N 271993+)RECPTCLE 1/4 TURN CLIP ON #85800-097C35.(S/N 538366+)HHCS 1/4-20X1 1/4 GR5802-224C36.(S/N 538366+)MANUAL STORAGE CONTAINER816-504C37.(S/N 538366+)WASHER FLAT 1/4 SAE PLT804-007C38.(S/N 538366+)NUT HEX NYLOCK 1/4-20803-255C39.




Applies to OS1572

15375




Applies to OS1548


Drawing Image Numberdwg15375(S/N 166724+)OS1548 FRAME WELDMENT308-315H1.

OS1548 FRAME WELDMENT ORANGE308-315H821.(S/N 89963166723)FRAME WELDMENT OS1548308-275H1.

RH TOP HITCH WELDMENT OS1572308-178E2.RH TOP HITCH 0S1572 ORANGE308-178E822.NUT HEX 5/8-11 PLT803-021C3.WASHER LOCK SPRING 5/8 PLT804-022C4.

(S/N 271992-)TOP PTO GUARD308-254D5.(S/N 271992-)TOP SPACER HEAVY HITCH RTA15311-093D6.(S/N 271992-)BOTTOM PTO GUARD STRIP308-255D7.

STUD 1/4 TURN WING HD #85-360800-096C8.(S/N 271992-)HHCS 5/16-18X3/4 GR5802-007C9.(S/N 271992-)WASHER LOCK SPRING 5/16 PLT804-009C10.

LH TOP HITCH WELDMENT OS1572308-177E11.LH TOP HITCH OS1572 ORANGE308-177E8211.HHCS 5/8-11X3 3/4 GR5802-153C12.RETAINER SPLIT RING #85800-098C13.RECPTCLE 1/4 TURN CLIP ON #85800-097C14.HHCS 1/2-13X1 1/4 GR5802-034C15.OS1548 SHAFT GUARD TUBE308-342D16.OS1548 SHAFT GUARD TUBE ORANGE308-342D8216.WASHER LOCK SPRING 1/2 PLT804-015C17.NUT HEX 1/2-13 PLT803-020C18.HOLE PLUG 2 DIA890-020C19.PIN ROLL 1/4X1 3/4805-041C20.

Rev. 2PIN 7/8 OD X 4 15/32 USABLE805-207C21.Rev 1; Use up stockRPBY 805-207C303-044D21.

PIN LYNCH 5/16 X 1 3/4805-015C22.GREASE ZERK STRAIGHT 1/4-28800-001C23.

(S/N 271993+)OS GB/DRIVELINE GUARD WELDMENT308-345H24.OS GB/DRIVELINE GUARD ORANGE308-345H8224.

(S/N 271993+)SPACER 1 1/4OD X 25/32ID X 2LG308-400D25.Rev. 2(S/N 306787+)HHCS 3/4-10X4 GR5802-068C26.Rev 1; Use up stock(S/N 271993306786)HHCS 3/4-10X4 GR5 FTHD802-067C26.

(S/N 271993+)WASHER LOCK SPRING 3/4 PLT804-023C27.(S/N 271993+)NUT HEX 3/4-10 PLT803-027C28.(S/N 271993+)HHCS 1/4-20X1/2 GR2802-283C29.(S/N 271993+)HALF-CLIP 5/16 DIA. HOSE890-266C30.(S/N 271993 to 764850)RETAINER SPLIT RING #85800-098C31.S/N 764851+NUT CLIP U-TYPE 5/16-18800-120C32.(S/N 271993 to 764850)RECPTCLE 1/4 TURN CLIP ON #85800-097C32.Includes 1 each of items 21 & 22LOWER HITCH PIN 7/8 X 5 5/8303-017S33.(S/N 538366+)HHCS 1/4-20X1 1/4 GR5802-224C34.(S/N 538366+)MANUAL STORAGE CONTAINER816-504C35.(S/N 538366+)WASHER FLAT 1/4 SAE PLT804-007C36.(S/N 538366+)NUT HEX NYLOCK 1/4-20803-255C37.S/N 764851+SCREW THUMB 5/16-18 X 1 PLT801-243C38.S/N 764851+STUD 1/4 TURN WING HD #85-360800-096C38.




Applies to OS1548

15383



Packer Wheel Assemblies



Drawing Image Numberdwg15383PACKER WHEEL BUNDLE OS1548308-318APACKER WHEEL BUNDLE OS1572308-319AWASHER FLAT 1 SAE804-029C1.NUT HEX 3/8-16 PLT803-014C2.WASHER LOCK SPRING 3/8 PLT804-013C3.BEARING 1 BORE X 4 BOLT822-085C4.PACKER WHL RH SHAFT GUARD308-212H5.HHCS 3/8-16X1 3/4 GR5802-023C6.

Rev. 3 not compat. w/Rev. 2.(S/N 216718+)OS1548 21 WHEEL SCRAPER BAR308-397D7.Rev. 2 not compat. w/Rev. 1.(S/N 32072216717)SCRAPER BAR OS1548308-280D7.Rev. 1(S/N 32071-)SCRAPER BAR 48 OS308-170D7.Rev. 3 not compat. w/Rev. 2.(S/N 216718+)OS1572 30 WHEEL SCRAPER BAR308-398D8.Rev. 2 not compat. w/Rev. 1.(S/N 32072216717)SCRAPER ANGLE 72-31WHLS308-194D8.Rev. 1(S/N 32071-)SCRAPER ANGLE308-081D8.

(S/N 32072+)OS1548 CAST WHEEL CAP PLATE308-281D9.Rev. 2 not compat. w/Rev. 1.(S/N 32072+)SMOOTH RLR SCRAPER OS1548308-214H10.Rev. 1(S/N 32071-)SCRAPER BAR WELDMT OS1548308-105H10.

SCRAPER BAR ASSEMBLY308-053H11.OS 1548 CAST WHL TUBE WELDMENT308-080H12.

Rev. 2 not compat. w/Rev. 1.(S/N 32072+)CAST WHEEL TUBE OS1572308-201H13.Rev. 1(S/N 32071-)72 CAST WHEEL MOUNTING TUBE307-031H13.

OS1548 SMOOTH ROLLER WELDMT308-076H14.SMOOTH ROLLER ASSEMBLY308-055H15.BUSHING 1 1/2OD X .234 X 1/2308-373D16.12 ROLLER SPACER 1/4308-360D17.SPACER 9 1/4 ID X 1 13/16 WELD308-293H18.SPACER 9 1/4 ID X 3/4 WELDMENT308-300H19.PLUG PIPE HEX HD 1-11 1/2 NPT800-076C20.ROLLER WHEEL 12812-056C21.PLASTIC 12 ROLLER WHEEL817-153C21.WASHER FLAT 3/8 SAE PLT804-012C22.

Rev. 2HHCS 3/8-16X1 1/4 GR5802-079C23.Rev 1; Use up stockHHCS 3/8-16X1 GR5802-017C23.

(S/N 32071-)CAST WHEEL SHIM PLATE307-062D24.Rev. 2(S/N 32071-)OS1548 CAST WHL END CAP308-102H25.Rev 1; Use up stockRPBY 308-102H308-021H25.

OS1548 FAIRWAY ROLLER SUPPORT308-390D26.OS1572 FAIRWAY ROLLER SUPPORT308-391D26.

(S/N 216718+)PACKER WHEEL 1/4 SPACER PLATE308-399D27.



Packer Wheel Assemblies


15381



Rear Roller Arm Assembly (S/N 166723-)



Drawing Image Numberdwg15381SHORT WHEEL ARM WELDMENT LH308-145H1.RPBY 308-307H308-022H2.PIN CLEVIS 1 X 3 1/2 USABLE805-130C3.HHCS 1/2-13X1 1/2 GR5802-091C4.ROLLER WHEEL ARM STOP LH308-045D5.

(S/N 35089+)UTILITY CLEVIS 5/16890-018C6.(S/N 35089+)PACKER WHEEL CHAIN308-256D7.(S/N 35088-)NUT LOCK 5/8-11 PLT803-024C8.(S/N 35088-)HHCS 5/8-11X1 3/4 GR5802-053C9.(S/N 35088-)SUPPORT CHAIN ASSY308-070H10.(S/N 35088-)HHCS 5/8-11X2 3/4 GR5802-281C11.(S/N 35088-)HHCS 5/8-11X2 1/2 GR5802-058C12.(S/N 35088-)LINK UPPER MOUNT308-059E13.(S/N 35088-)NUT HEX JAM 1 1/4-7 PLT803-032C14.(S/N 35088-)GAUGE WHEEL ADJ LINK120-003E15.(S/N 35088-)UPPER GAUGE WHEEL CLEVIS120-001E16.

RPBY308-310H,308-308H&308-309H308-023H17.SHORT WHEEL ARM WELDMENT RH308-146H18.NUT LOCK 1/2-13 PLT803-019C19.PIN COTTER 3/16 X 1 3/4 PLT805-017C20.WASHER FLAT 1 SAE804-029C21.REAR ROLLER ARM WELDMENT LH308-307H22.REAR ROLLER ARM WELDMENT RH308-310H23.REAR ROLLER FRONT GUARD WDNT308-308H24.REAR ROLLER REAR GUARD WDMT308-309H25.



Rear Roller Arm Assembly (S/N 166723-)


15382



Rear Roller Arm Assembly (S/N 166724+)



Drawing Image Numberdwg15382PIN CLEVIS 1 X 3 11/16 GR5 PLT805-124C1.REAR ROLLER STOP PIN ASSEMBLY308-311S2.PIN HAIR COTTER .094805-010C3.REAR ROLLER ARM WELDMENT LH308-307H4.HHCS 1/2-13X1 1/4 GR5802-034C5.REAR ROLLER ADJUSTMENT BKT LH308-378D6.NUT HEX FLANGE 1/2-13 GR G PLT803-193C7.UTILITY CLEVIS 5/16890-018C8.PACKER WHEEL CHAIN308-256D9.REAR ROLLER ADJUSTMENT BKT RH308-384D10.REAR ROLLER ARM WELDMENT RH308-310H11.PIN COTTER 3/16 X 1 3/4 PLT805-017C12.WASHER FLAT 1 SAE804-029C13.



Rear Roller Arm Assembly (S/N 166724+)


30281


Table of Contents Part Number IndexLand Pride Section 3: BoxesOS15 SERIES

Bolt-on Agitator Extension Kit OS



Drawing Image NumberDwg 30281S/N 644707+AGITATOR EXTENTION KIT 48313-503A1.S/N 644707+AGITATOR EXTENSION KIT 72313-505A1.

AGITATOR PADDLE EXTENDED313-791D2.HHCS 1/4-20X5/8 GR5802-078C3.NUT HEX NYLOCK 1/4-20803-255C4.


Table of Contents Part Number IndexSection 3: Boxes Land PrideOS15 SERIES

Bolt-on Agitator Extension Kit OS


10527



Box Assembly (S/N 124695-) (S/N 222276 To 543361)



Drawing Image NumberDwg 10527OVERSEEDER LID 4'308-081H1.72 LID WELDMENT308-002H1.WASHER FLAT 5/16 SAE PLT804-036C2.WASHER WAVE SPRING 5/16804-056C3.NUT HEX NYLOCK 5/16-18 PLT803-084C4.LID LATCH - HANDLE179-023D5.

ObsoleteRPBY 179-023D308-394D5.LID LATCH GRIP817-033C6.

Rev. 2OS LID HINGE WELDMENT L.H.308-332H7.Rev 1; Use up stockUsed on units painted greenLID HINGE WELDMENT L.H.179-004H7.

LID LATCH - UPPER ARM179-022D8.RPBY 179-022D308-393D8.

Rev. 2HHCS 5/16-18X3/4 GR5802-007C9.Rev 1; Use up stockHHCS 5/16-18X1 GR5802-159C9.

SCREW 5/16-18X82DEG CNTSKX1P801-024C10.LID LATCH - LOWER ARM179-021D11.SEED DIVERTER PIN179-025D12.SNAP RING EXT E 5/8800-048C13.

Rev. 2OS LID HINGE WELDMENT R.H.308-333H14.Rev 1; Use up stockUsed on units painted greenLID HINGE WELDMENT R.H.179-005H14.

HHCS 3/8-16X1 GR5802-017C15.SEED DIVERTER308-117D16.

Rev. 2 not compat. w/Rev. 1.(S/N 35089+)SEEDBOX OS1548308-164H17.Rev. 1(S/N 35088-)OVERSEEDER 4' BOX WELDMENT308-074H17.Rev. 2 not compat. w/Rev. 1.(S/N 35089+)SEEDBOX OS1572308-165H18.Rev. 1(S/N 35088-)72 OVERSEEDER BOX WELDMENT308-001H18.

WASHER INTERNAL STAR #10 PLT804-004C19.NUT HEX 10-24 PLT803-001C20.OS REAR LID LATCH STRIKE308-395D21.SCREW RD HD 10-24 X 3/4 PLT801-021C22.NUT HEX 5/16-18 PLT803-008C23.WASHER LOCK SPRING 5/16 PLT804-009C24.WASHER FLAT 5/16 USS PLT804-010C25.NUT HEX 1/2-13 PLT803-020C26.WASHER LOCK SPRING 1/2 PLT804-015C27.WASHER LOCK SPRING 3/8 PLT804-013C28.NUT HEX 3/8-16 PLT803-014C29.OVERSEEDER SLING BRACKET308-193D30.HHCS 1/2-13X1 GR5802-258C31.FLANGETTE 47 MST822-041C32.BEARING 3/4BORE 47MM SPHERE OD822-040C33.HHCS 1/4-20X1 1/2 GR5802-167C34.19T SPEED CHANGE SPROCKET202-002H35.NUT LOCK 1/4-20 PLT803-007C36.HHCS 5/16-18X3/4 GR5802-007C37.48 AGITATOR WELDMENT308-085H38.72 AGITATOR WELDMENT308-003H38.WASHER FLAT 3/8 SAE PLT804-012C39.



Box Assembly (S/N 124695-) (S/N 222276 To 543361)


12868



Box Assembly (S/N 124696 To 222275)



Drawing Image NumberDwg 1286872 LID WELDMENT308-002H1.OVERSEEDER LID 4'308-081H1.WASHER FLAT 5/16 SAE PLT804-036C2.WASHER WAVE SPRING 5/16804-056C3.NUT HEX NYLOCK 5/16-18 PLT803-084C4.LID LATCH - HANDLE179-023D5.

ObsoleteRPBY 179-023D308-394D5.LID LATCH GRIP817-033C6.OS LID HINGE WELDMENT L.H.308-332H7.LID LATCH - UPPER ARM179-022D8.RPBY 179-022D308-393D8.

Rev. 2HHCS 5/16-18X3/4 GR5802-007C9.Rev 1; Use up stockHHCS 5/16-18X1 GR5802-159C9.

SCREW 5/16-18X82DEG CNTSKX1P801-024C10.LID LATCH - LOWER ARM179-021D11.SEED DIVERTER PIN179-025D12.SNAP RING EXT E 5/8800-048C13.OS LID HINGE WELDMENT R.H.308-333H14.HHCS 3/8-16X1 GR5802-017C15.SEED DIVERTER308-117D16.SEED DIVERTER OS1548308-175D16.SEEDBOX OS1548308-164H17.SEEDBOX OS1572308-165H17.WASHER INTERNAL STAR #10 PLT804-004C18.NUT HEX 10-24 PLT803-001C19.OS REAR LID LATCH STRIKE308-395D20.SCREW RD HD 10-24 X 3/4 PLT801-021C21.NUT HEX 5/16-18 PLT803-008C22.WASHER LOCK SPRING 5/16 PLT804-009C23.WASHER FLAT 5/16 SAE PLT804-036C24.NUT HEX 1/2-13 PLT803-020C25.WASHER LOCK SPRING 1/2 PLT804-015C26.WASHER LOCK SPRING 3/8 PLT804-013C27.NUT HEX 3/8-16 PLT803-014C28.OVERSEEDER SLING BRACKET308-193D29.HHCS 1/2-13X1 GR5802-258C30.FLANGETTE 47 MST822-041C31.BEARING 3/4BORE 47MM SPHERE OD822-040C32.HHCS 1/4-20X1 1/2 GR5802-167C33.AGITATOR SPROCKET 19T WELDMENT308-286H34.NUT LOCK 1/4-20 PLT803-007C35.HHCS 5/16-18X3/4 GR5802-007C36.72 AGITATOR WELDMENT308-003H37.48 AGITATOR WELDMENT308-085H37.

Rev. 2 not compat. w/Rev. 1.Includes 1 each of items 40; 41; 42;& 43.

IDLER BAR ASSEMBLY308-306S38.

Rev. 1RPBY 308-306S.IDLER BAR308-369D38.CHAIN RL #40 X 38 PITCH W/CON809-155C39.RHSNB 5/16-18X3/4 GR5802-092C40.NUT HEX FLANGE 5/16-18 PLT803-199C41.IDLER BAR ADJUSTMENT308-374D42.IDLER BAR308-369D43.



Box Assembly (S/N 124696 To 222275)


24918



Box Assembly (S/N 543362+)



Drawing Image NumberDwg 24918S/N 536656+LID LATCH - LOWER ARM179-021D1.S/N 536655-LID LATCH LOWER ARM APS 48/72313-720D1.

LID LATCH - UPPER ARM179-022D2.S/N 536656+RPBY 179-022D308-393D2.S/N 536655-LID LATCH UPPER ARM APS 48/72313-721D2.

LID LATCH - HANDLE179-023D3.ObsoleteRPBY 179-023D308-394D3.S/N 644707+AGITATOR WELD 48313-482H5.S/N 644706-RPBY 313-482H308-085H5.S/N 644707+AGITATOR WELD 72313-484H5.S/N 644706-RPBY 313-484H308-003H5.

60 AGITATOR WELDMENT313-462H5.S/N 644707+AGITATOR WELD APS 86313-457H5.S/N 644706- (Obsolete)RPBY 313-457H313-411H5.S/N 573698-SEED DIVERTER PIN179-025D6.

REAR LID LATCH STRIKE179-030D7.19T SPEED CHANGE SPROCKET202-002H8.

S/N 573698-SEED DIVERTER OS1548308-175D9.SEED DIVERTER OS1548 ORANGE308-175D829.

S/N 573698-SEED DIVERTER 72"308-117D9.SEED DIVERTER 72 ORANGE308-117D829.

S/N 908755-OS/PS SLING BKT308-193D10.S/N 908756+SLING BRACKET PS25120313-163D11.

LID HINGE PIVOT313-186D12.RIGHT HAND HINGE313-381S13.LEFT HAND HINGE313-382S14.SEED BOX WELDMENT 48"313-389H15.SEED BOX WELDMENT 48" ORANGE313-389H8215.APS1572 SEEDBOX313-379H15.APS1572 SEEDBOX ORANGE313-379H8215.SEEDBOX APS1560313-377H15.SEEDBOX APS1560 ORANGE313-377H8215.SEEDBOX APS1586313-403H15.SEEDBOX APS1586 ORANGE313-403H8215.RIGHT BRACKET313-704D16.LEFT BRACKET313-705D17.

S/N 1136115+LID WELDMENT, 48" W/ LIGHTS313-962H18.S/N 573699 to S/N 1136114LID WELDMENT, 48"308-368H18.

LID WELDMENT, 48" ORANAGE308-368H8218.S/N 573698-LID WELDMENT 4'308-081H18.

OVERSEEDER LID 4' ORANGE308-081H8218.S/N 1136115+LID WELDMENT, 60" W/ LIGHTS313-961H18.S/N 1136114-LID WELDMENT, 60"313-378H18.

LID WELDMENT, 60" ORANGE313-378H8218.S/N 1136115+LID WELDMENT, 72" W/LIGHTS313-963H18.S/N 573699 to S/N 1136114LID WELDMENT, 72"308-366H18.

LID WELDMENT, 72" ORANGE308-366H8218.S/N 573698-72 LID WELDMENT308-002H18.

72 LID WELDMENT ORANGE308-002H8218.S/N 1136115+LID WELDMENT, 86" W/ LIGHTS313-973H18.S/N 1136114-LID WELDMENT, 86"313-400H18.

LID WELDMENT, 86" ORANGE313-400H8218.S/N 573698-SNAP RING EXT E 5/8800-048C19.S/N 936737-SCREW RD HD 1/4-20 X 5/8801-018C20.

SCREW RD HD 10-24 X 3/4 PLT801-021C21.SCREW 5/16-18X82DEG CNTSKX1P801-024C22.SCREW SET 1/4-28X1/4 KNL CUP801-045C23.



Box Assembly (S/N 543362+)


RevisionCommentsPart DescriptionPart No.Ref.HHCS 5/16-18X3/4 GR5802-007C24.HHCS 3/8-16X1 GR5802-017C25.

S/N 908756+HHCS 5/8-11X1 1/4 GR5802-050C26.RHSNB 5/16-18X3/4 GR5802-092C27.HHCS 1/4-20X1 1/2 GR5802-167C28.

S/N 908755-HHCS 1/2-13X1 GR5802-258C29.RHSNB 3/8-16X2 GR5802-411C30.NUT HEX 10-24 PLT803-001C31.NUT LOCK 1/4-20 PLT803-007C32.NUT HEX 5/16-18 PLT803-008C33.NUT HEX 3/8-16 PLT803-014C34.

S/N 908755-NUT HEX 1/2-13 PLT803-020C35.NUT HEX NYLOCK 5/16-18 PLT803-084C36.

S/N 936737-NUT HEX LOCK 1/4-20 FLG803-088C37.S/N 936738+NUT HEX FLG TP LK 5/16-18ZNYCR803-177C38.

NUT FLANGE LOCK 3/8-16 PLT803-209C39.S/N 908756+NUT HEX FLANGE LOCK 5/8-11 PLT803-263C40.

WASHER INTERNAL STAR #10 PLT804-004C41.S/N 936737-WASHER FLAT 1/4 SAE PLT804-007C42.

WASHER LOCK SPRING 5/16 PLT804-009C43.WASHER FLAT 5/16 USS PLT804-010C44.WASHER LOCK SPRING 3/8 PLT804-013C45.

S/N 908755-WASHER LOCK SPRING 1/2 PLT804-015C46.WASHER FLAT 5/16 SAE PLT804-036C47.WASHER WAVE SPRING 5/16804-056C48.LID LATCH GRIP817-033C49.

S/N 908756+NYLON RATCHET (TREE RIVET)817-323C50.S/N 936737-DECAL SLOW MOVING-GALV. BACKED818-055C51.

BRG INS .75IDX1.85OD SPH LCK822-040C52.FLANGETTE 47 MST822-041C53.

S/N 908756+NYLON RATCHET FASTENER 7/16 D.837-060C54.S/N 936738+SMV MOUNTING SOCKET890-401C55.



Box Assembly (S/N 543362+) (continued)


This Page Intentionally Left Blank



Box Assembly (S/N 543362+) (continued)


12869



Feeder Cup Assembly



Drawing Image Numberdwg12869Rev. 2(S/N 35089+)FEEDER CUP CHANNEL OS1548308-226D1.

FEEDER CUP CHNL OS1548 ORANGE308-226D821.Rev. 1(S/N 35088-)FDR CUP CHANNEL OS1548308-164D1.Rev. 2(S/N 35089+)FEEDER CUP CHANNEL OS1572308-227D2.

FEEDER CUP CHNL OS1572 ORANGE308-227D822.Rev. 1(S/N 35088-)72 OS FEEDER CUP CHANNEL308-011D2.Rev. 2 not compat. w/Rev. 1.HHCS 1/4-20X3/4 GR5802-004C3.Rev. 1HFSS 1/4-20X5/8 GR5802-196C3.Rev. 25/8 SHAFT LOCKING COLLAR890-350C4.Rev 1; Use up stockRPBY 890-350C182-022D4.

SCREW SET 5/16-18 SKT KP X 3/8801-035C5.Rev. 4RPBY 804-007C &803-007C.NUT HEX WHIZ 1/4-20 PLT803-194C6.Rev 3; Use up stockRPBY 804-007C.WASHER LOCK 1/4 EXTERNAL TOOTH804-052C6.Rev 3; Use up stockRPBY 803-007C.NUT HEX 1/4-20 PLT803-006C6.Rev 2; Use up stockUse with 803-007C.WASHER FLAT 1/4 SAE PLT804-007C6.Rev 2; Use up stockUse with 804-007C.NUT LOCK 1/4-20 PLT803-007C6.Rev 1; Use up stockNUT HEX LOCK 1/4-20 FLG803-088C6.

WASHER RETAINING804-031C7.Rev. 2 not compat. w/Rev. 1.Used on OS1548.SPACER TUBE 4.991308-253D8.Rev. 2 not compat. w/Rev. 1.Used on OS1572.SPACER TUBE 4.898 LONG308-234D8.Rev. 17 3/8 FEEDER CUP SPACER TUBE308-018D8.

SEED CUP ASSEMBLY-1 1/4817-094C9.COLAR ADJUSTMENT ASY308-004S10.WASHER LOCK SPRING 1/2 PLT804-015C11.HHCS 1/2-13X3/4 GR5802-032C12.SNAP RING EXT BASIC 1.880800-004C13.RING FC HOUSING800-005C14.BEARING 206PP 30MM822-059C15.CUP DRIVE BRG. HOUSING176-006D16.

Rev. 1; Rev. 3 not compat.w/Rev. 2.

(S/N 222276+) (S/N 124695-)CUP DRIVE SPROCKET WELDMENT308-006E17.

Rev. 2 not compat. w/Rev. 1.(S/N 124696222275)SEED CUP 43T-19T SPKT WELDMENT308-284H17.FEEDER CUP SHAFT308-010D18.48 FEEDER CUP SHAFT308-165D18.

Rev. 2(S/N 199101+)SPROCKET SHORT POWDERED METAL890-595C19.Rev 1; Use up stock(S/N 199100-)NYLON SPROCKET308-021D19.

CUP SLEEVE308-022D20.SEED CUP WASHER RETAINER817-073C21.SCR SELF TAP 8X3/8 TYPE25 BT801-057C22.NYLON WASHER817-004C23.SEED CUP LEFT HALF817-096C24.SEED CUP DOOR817-095C25.SEED CUP RIGHT HALF817-097C26.

Rev. 2 not compat. w/Rev. 1.SEED CUP ADJUSTMENT HANDLE817-071C27.Rev. 1(S/N 89962-) Use only with item 30.SEED CUP ADJUSTMENT HANDLE817-014C27.

CUP DRIVE BEARING HOUSING ASSY176-031V28.Rev. 1; Rev. 3 not compat.w/Rev. 2.

(S/N 222276+) (S/N 124695-)33 T DRIVE SPROCKET ASSEMBLY308-036S29.

Rev. 2 not compat. w/Rev. 1.(S/N 124696222275)43T-19T CUP SPROCKET ASSEMBLY308-295S29.(S/N 89962-) Use existing stock onlyif replacing same seed cup assembly

RPBY 817-094C817-016C30.

(S/N 89962-)LONG ADJ HANDLE SPACER TUBE308-020D31.(S/N 89962-)SHORT ADJ HANDLE SPACER TUBE308-019D32.

SPKT 40A33 X .630 SQ BORE808-247C33.POWDERED GRAPHITE 1 LB BOTTLE821-042C34.



Feeder Cup Assembly


15378



Seed Rate Adjustment Assembly (S/N 35088-)



Drawing Image Numberdwg15378NUT HEX 5/16-18 PLT803-008C1.WASHER LOCK SPRING 5/16 PLT804-009C2.WASHER FLAT 5/16 SAE PLT804-036C3.SEED ADJ BEARING PIVOT TUBE308-015D4.WASHER FLAT 5/8 USS PLT804-019C5.PIN COTTER 3/16 X 1 1/4 PLT805-016C6.ADJUSTMENT HANDLE PIVOT109-069D7.OS ADJ LOCK PLATE ASSY 1 1/2 W308-334H8.ADJUSTMENT HANDLE308-017D9.NUT WING 1/2-13 PLT803-016C10.ADJ HANDLE PIVOT BRACKET308-014D11.WASHER FLAT 3/8 SAE PLT804-012C12.WASHER LOCK SPRING 3/8 PLT804-013C13.HHCS 3/8-16X3/4 GR5802-014C14.WASHER FLAT 1/4 SAE PLT804-007C15.NUT LOCK 1/4-20 PLT803-007C16.HFSS 1/4-20X5/8 GR5802-196C17.HHCS 5/16-18X3/4 GR5802-007C18.NUT HEX 8-32 BRASS803-035C19.WASHER INTERNAL STAR #8 BRASS804-002C20.WASHER FLAT #8 BRASS804-003C21.ADJ GAUGE MOUNT BRACKET308-016D22.NAME PLATE ADJ GAUGE SHORT819-005C23.SCREW RD HD 8-32 X 3/8 BRASS801-001C24.



Seed Rate Adjustment Assembly (S/N 35088-)


12936



Seed Rate Adjustment Assembly (S/N 35089+)



Drawing Image Numberdwg12936ADJUSTMENT HANDLE PIVOT109-069D1.TUBE PIVOT .630ODX.34IDX.28L308-015D2.

Rev 2SEED RATE ADJ HANDLE BENT308-306D3.Rev 1: Use up stockRPBY 308-306D313-057D3.

OS ADJ LOCK PLT ASY308-334H4.PIVOT MTG ADJ HANDLE313-054D5.GAUGE MTG PLATE313-055D6.GAUGE MTG PLATE ORANGE313-055D826.SEED GAUGE PLT. MTG313-056D7.SEED GAUGE PLT. MTG ORANGE313-056D827.SCREW RD HD 8-32 X 3/8 BRASS801-001C8.

Rev 2HHCS 3/8-16X3/4 GR5802-014C9.Rev 1: Use up stockHHCS 3/8-16X1 GR5802-017C9.

HFSS 1/4-20X5/8 GR5802-196C10.NUT HEX 1/4-20 PLT803-006C11.NUT HEX 5/16-18 PLT803-008C12.NUT WING 1/2-13 PLT803-016C13.NUT HEX 8-32 BRASS803-035C14.NUT HEX LOCK 1/4-20 FLG803-088C15.

S/N 859902+NUT HEX NYLOCK 1/2-13803-147C16.WASHER INTERNAL STAR #8 BRASS804-002C17.WASHER FLAT #8 BRASS804-003C18.WASHER LOCK SPRING 1/4 PLT804-006C19.WASHER LOCK SPRING 5/16 PLT804-009C20.WASHER FLAT 5/16 USS PLT804-010C21.WASHER FLAT 3/8 SAE PLT804-012C22.WASHER LOCK SPRING 3/8 PLT804-013C23.WASHER FLAT 5/8 USS PLT804-019C24.PIN COTTER 3/16 X 1 1/4 PLT805-016C25.NAME PLATE ADJ. GUIDE SHORT819-086C26.



Seed Rate Adjustment Assembly (S/N 35089+)


70084



Seeder Light Kit S/N 1136115+



Image No.Dwg 70084SEEDER LIGHT KIT313-970L*CABLE TIE .19X14.25 3DIA 50LB800-060C1.HHCS 1/4-20X1 GR5802-005C2.NUT HEX NYLOCK 1/4-20803-255C3.NUT HEX NYLOCK 10-24 PLT803-268C4.WASHER FLAT 1/4 SAE PLT804-007C5.HHCS #10-24X1 GR5842-265C6.LIGHT WIRE HARNESS 8'891-529C7.ENHANCE MODULE891-531C8.LEAD WIRE HARNESS 5'891-786C9.DUAL INCANDESCENT LIGHT LH891-794C10.DUAL INCANDESCENT LIGHT RH891-795C11.



Seeder Light Kit S/N 1136115+


10506


Table of Contents Part Number IndexLand Pride Section 4: DrivesOS15 SERIES

Gauge Wheel Drive



Drawing Image Numberdwg10506WHL & TIRE ASSY 18 X 8.50 X 8814-051C1.NUT LUG 1/2-20 X 60 DEG PLT803-159C2.VALVE STEM TR412816-088C3.

Rev. 2 not compat. w/Rev. 1HHCS 5/8-11X1 3/4 GR5802-053C4.Rev. 1HHCS 5/8-11X1 1/2 GR5802-051C4.

WASHER LOCK SPRING 5/8 PLT804-022C5.WASHER FLAT 5/8 SAE PLT804-021C6.SNAP RING INT 1.812800-070C7.BEARING 204 DOUBLE SEAL DD822-067C8.

Rev. 1; Rev. 3 not compat.w/Rev. 2.

(S/N 222276+) (S/N 124695-)OVERSEEDER SPEED CHANGE SPRKT19T-35T

308-024H9.

Rev. 2 not compat. w/Rev. 1(S/N 124696222275)SPEED CHANGE 19T-30T WELDMENT313-144H9.CHAIN RL 40 X 66 PITCH809-060C10.#40 CONNECTOR LINK-PLATED809-096C11.RH GAUGE WHEEL ARM308-027H12.RH GAUGE WHEEL ARM ORANGE308-027H8212.HFSS 1/4-20X1/2 GR5802-148C13.WASHER 1 7/8 OD X 1.505 ID-078804-068C14.PIN COTTER 5/16 X 2 1/2805-085C15.

Rev. 2 not compat. w/Rev. 1(S/N 25447+)RH SPINDLE WELDMENT308-121H16.Rev. 1(S/N 25446-)RH SPINDLE WELDMENT308-025H16.

TINE GAUGE WHEEL HUB SEAL816-014C17.BEARING CONE 1822-030C18.BEARING CUP L44610822-080C19.HUB STUD 1/2-20X1 5/8 GR5802-135C20.

Rev. 2 not compat. w/Rev. 1(S/N 25447+)OS DRIVE HUB200-034H21.Rev. 1(S/N 25446-)4-BOLT DRIVE HUB WELDMENT200-029H21.

WASHER FLAT 3/4 SAE PLT804-025C22.PIN COTTER 5/32 X 1 1/4 LG805-045C23.GREASE CAP890-068C24.NUT HEX SLOTTED 3/4-16803-053C25.

Rev. 2HHCS 5/16-18X1 1/2 GR2802-295C26.Rev 1; Use up stockHHCS 5/16-18X1 1/2 GR5802-012C26.

NUT LOCK 5/16-18 PLT803-011C27.Rev. 2NUT HEX FLG. LOCK 1/2-13 PLT.803-169C28.

GAUGE WHEEL IDLER ARM WELDMENT308-029H29.NO. 40 12T IDLER SPKT.817-025C30.PIN COTTER 7/64 X 1 LONG805-064C31.WASHER FLAT 1/2 SAE PLT804-016C32.

Rev. 2 not compat. w/Rev. 1(S/N 35089+)SEEDBOX CHAIN GUARD308-173H33.SEEDBOX CHAIN GUARD ORANGE308-173H8233.

Rev. 1(S/N 35088-)DRIVE CHAIN GUARD308-084H33.Rev. 2 not compat. w/Rev. 1(S/N 222276+)CHAIN RL #40 X 132 PITCHES809-112C34.Rev. 1(S/N 222275-)CHAIN RL #40 X 128 PITCHES809-090C34.Rev. 2 not compat. w/Rev. 1(S/N 222276+)CHAIN RL #40 X 8 PITCHES809-091C34.Rev. 1(S/N 222275-)CHAIN RL #40 X 6 PITCH W/CON809-154C34.

PIN COTTER 7/64 X 1 LONG805-064C35.WASHER FLAT 1/2 SAE PLT804-016C36.NO. 40 12T IDLER SPKT.817-025C37.

Rev. 1; Rev. 3(S/N 222276+) (S/N 124695-)DRIVE IDLER ARM308-107H38.Rev. 2 not compat. w/Rev. 1(S/N 124696222275)DRIVE IDLER ARM-SHORT308-283H38.

LOWER CHAIN TENSIONER ASSY308-128S39.SPRING EXT IDLER807-025C40.HHCS 1/2-13X2 3/4 GR5802-226C41.NUT HEX 1/2-13 PLT803-020C42.WASHER LOCK SPRING 1/2 PLT804-015C43.HHCS 1/4-20X2 1/2 GR5802-097C44.


Table of Contents Part Number IndexSection 4: Drives Land PrideOS15 SERIES

Gauge Wheel Drive


RevisionCommentsPart DescriptionPart No.Ref.NUT HEX 1/4-20 PLT803-006C45.WASHER LOCK SPRING 1/4 PLT804-006C46.BUSHING PIVOT PIN 1 1/2 ID890-126C47.



Gauge Wheel Drive (continued)





Gauge Wheel Drive (continued)


16727



Gauge Wheel Link



Drawing Image Numberdwg16727NUT LOCK 5/8-11 PLT803-024C1.GW LINK CLEVIS WELDMENT308-017H2.HHCS 5/8-11X2 1/2 GR5802-058C3.NUT HEX JAM 3/4-10 PLT803-048C4.NUT HEX 3/4-10 PLT803-027C5.GW LINK STUD308-075D6.WASHER STOP308-115D7.SPRING DISC ARM807-005C8.GW LINK TUBE WELDMENT308-018H9.HHCS 3/8-16X1 1/4 GR5802-079C10.GW LINK MOUNT BRACKET308-049D11.GW LINK MOUNT BRACKET ORANGE308-049D8211.NUT LOCK 3/4-10 PLT803-026C12.NUT HEX 3/8-16 PLT803-014C13.WASHER LOCK SPRING 3/8 PLT804-013C14.SPRING LINK ROD ASSY308-063H15.SPRING FLOATING HOE807-017C16.SPRING LINK CAP ASSY308-061H17.LINK SLIDE BUSHING308-132D18.PIN ROLL 3/16X 1 1/2 PLT805-024C19.PIN ROLL 1/4 X 2 LG PL805-146C20.SPRING LINK TUBE ASSY308-060H21.CLEVIS WELDMENT308-062H22.PIN ROLL 3/16X 1 1/2 PLT805-024C23.



Gauge Wheel Link


10509



Gauge Wheel Non Drive



Drawing Image Numberdwg10509TINE GAUGE WHEEL HUB SEAL816-014C1.BEARING CONE 1822-030C2.BEARING CUP L44610822-080C3.

Includes items 1, 2, 3 & 13TINE GW HUB815-001C4.WASHER FLAT 3/4 SAE PLT804-025C5.NUT HEX SLOTTED 3/4-16803-053C6.GREASE CAP890-068C7.NUT LUG 1/2-20 X 60 DEG PLT803-159C8.VALVE STEM TR412816-088C9.

Tire only.TIRE 18 X 8.50 X 8 TURF814-049C10.Tire, rim and valve stem.WHL & TIRE ASSY 18 X 8.50 X 8814-051C10.

WHEEL 8 DIA 4-BOLT X 7 WIDE814-050C11.PIN COTTER 5/32 X 1 1/4 LG805-045C12.NEILSON STUD 1/2-20UNFX1 13/16BO-4713.RPBY BO-47802-125C13.HHCS 5/8-11X4 GR5802-060C14.HHCS 3/8-16X1 1/4 GR5802-079C15.GW LINK MOUNT BRACKET308-049D16.GW LINK MOUNT BRACKET ORANGE308-049D8216.TURNBUCKLE LH END308-014H17.NUT LOCK 5/8-11 PLT803-024C18.WASHER LOCK SPRING 3/8 PLT804-013C19.NUT HEX 3/8-16 PLT803-014C20.TURNBUCKLE ADJ LINK308-016H21.NUT HEX 3/4-10 PLT803-027C22.TURNBUCKLE CLEVIS END308-015H23.

Rev. 2HHCS 5/16-18X1 1/2 GR2802-295C24.Rev 1; Use up stockHHCS 5/16-18X1 1/2 GR5802-012C24.Rev. 2RPBY 803-008C and 804-009C.NUT LOCK 5/16-18 PLT803-011C25.Rev 1; Use up stockRPBY 803-011C.NUT HEX 5/16-18 PLT803-008C25.

LH SPINDLE WELDMENT308-026H26.LH GAUGE WHEEL ARM308-028H27.LH GAUGE WHEEL ARM ORANGE308-028H8227.PIN COTTER 5/16 X 2 1/2805-085C28.WASHER 1 7/8 OD X 1.505 ID-078804-068C29.

Rev. 2HHCS 5/8-11X4 1/2 GR5802-100C30.Rev 1; Use up stockHHCS 5/8-11X4 GR5802-060C30.Rev 1; Use up stockRPBY 803-011C.WASHER LOCK SPRING 5/16 PLT804-009C31.

BUSHING PIVOT PIN 1 1/2 ID890-126C32.



Gauge Wheel Non Drive


10468



Gearbox (826-010C) Curtis (S/N 35088-)

Applies to OS1572


Drawing Image NumberDwg 10468GEARBOX OVERSEEDER826-010C*CU HOUSING0001741.PIPE PLUG, SOCKET HEAD,1/2 VNT4100352.

Rev. 2BEARING CUP LM-67010822-020C3.Rev 1; Use up stockRPBY 822-020C1501443.

CU PIPE PLUG 1/24100274.RETAINING RING6200705.THRUST COLLAR4500566.BEARING CONE TIMKEN 14137A1501697.BEARING CUP TIMKEN 142761501778.INPUT SHAFT2179929.CU GASKET .015 THICK39002110.CU GASKET .005 THICK39003911.CU GASKET .003 THICK39019512.

ObsoleteTHRU CAP05016113.CU HHCS FLG 5/16-18 X141016714.CU SEAL 1.375 X 2 X .31330008715.OUTPUT SHAFT21800816.CU GEAR 21TOOTH,1 3/8ID,5/16KW10056017.TAPERED KEY60022118.SHIM, .010 THICK QTY VARIES37074219.SHIM, .005 THICK QTY VARIES37073420.

Rev. 2BEARING CONE LM-67048822-021C21.Rev 1; Use up stockRPBY 822-021C15013621.

ObsoleteN/A60003122.CU GEAR 21TOOTH,1 1/4ID,1/4KW10013123.BLANK CAP05017924.BEARING CONE TIMKEN 1412415018525.



Gearbox (826-010C) Curtis (S/N 35088-)

Applies to OS1572

16730



Gearbox (826-010C) OMNI (S/N 35088-)

Applies to OS1572


Drawing Image NumberDwg 16730GEARBOX OVERSEEDER826-010C*OMNI PLUG VENT 1/2-14 NPTF1400331.OMNI PLUG, SOCKET HD. 1/2 PIPE1400042.OMNI HOUSING0101153.OMNI BEARING CUP 302070501704.OMNI BEARING CONE 302070501725.OMNI GEAR, 20T0302536.OMNI RETAINING RING, 35MM2001427.OMNI KEY, RECT. 10X8X250800398.OMNI SPACER0900999.OMNI GASKET, CAP 0.10MM07021810.OMNI GASKET, CAP 0.20MM07021911.OMNI GASKET, CAP 0.30MM07022012.OMNI CAP, THRU02016613.RPBY 804-009C13000614.RPBY 802-159C11000415.OMNI SEAL-THROUGH CAP (3-LIP)06013316.

Rev. 2OMNI OUTPUT SHAFT1 3/8"-21 SPL04039817.Rev 1; Use up stockRPBY 04039804033817.

OMNI INPUT SHAFT 1 3/8"-6 SPL04017918.OMNI CAP CANTILEVERED02016419.OMNI SEAL, CANT. CAP (3-LIP)06013420.OMNI CAP BLANK02016521.



Gearbox (826-010C) OMNI (S/N 35088-)

Applies to OS1572

10551



Gearbox (826-029C) Comer



Drawing Image Numberdwg10551GEARBOX OVERSEEDER826-029CGEARBOX OVERSEEDER ORANGE826-029C82*CO CASTING T20.268.0501.001.CO COVER0.268.1300.002.CO BOLT M8 X 14 8.88.1.1.003433.CO SHAFT 1 3/8 Z60.268.3208.004.CO BEARING 302078.0.9.000265.

Rev. 2COMER SHIM KIT 71.7A.248.5006.Rev 1; Use up stockRPBY A.248.5000.248.7500.006.

SNAP RING INT 2.835800-069C7.CO OIL SEAL 35 X 72 X 108.7.3.000558.CO OIL LEVEL PLUG0.121.7100.009.CO COTTER PIN B4 X 508.4.7.0111110.CO NUT M30 X 1.50.132.7106.0011.CO SHAFT 1 3/8 Z60.268.2210.0012.GEAR Z18 M6.150.267.5000.0013.

Rev. 2CO ADJUSTMENT SPACER, 35.3 X48A.259.50014.Rev 1; Use up stockRPBY A.259.5000.259.7500.0014.

CO SPACER0.268.7100.0015.CO SHIM 35.3 X 1.30.259.7513.0016.SNAP RING EXT 1 3/8 5100-137800-079C17.CO PLUG 1/4"8.6.5.0033918.CO CAP 72 X 108.7.0.0074419.CO NAME PLATE FOR 826-067C0.141.7105.0020.*Notes: Oil Type 80-90W Capacity 2 Pints



Gearbox (826-029C) Comer


19041



Gearbox (826-029C) Curtis

Applies to OS1548


Drawing Image NumberDwg 19041GEARBOX OVERSEEDER826-029C*CU HOUSING0001741.

ObsoleteCU PIPE PLUG SQ HD 1/2 NPT VT4101752.CU PLASTIC HOLE PLUG6504083.CU PIPE PLUG 1/24100274.CU RETAINING RING6200625.CU COLLAR4500646.

Rev. 2BEARING CONE LM-67048822-021C7.Rev 1; Use up stockRPBY 822-021C1501367.Rev. 2BEARING CUP LM-67010822-020C8.Rev 1; Use up stockRPBY 822-020C1501448.

CU OUTPUT SHAFT2191139.CU GASKET .015 THICK39002110.CU GASKET .005 THICK39003911.CU GASKET .003 THICK39019512.CU CAP05460113.CU HHCS FLG 5/16-18 X141016714.CU SEAL 1.375 X 2 X .31330008715.CU INPUT SHAFT21910516.CU GEAR 21TOOTH,1 1/4ID,1/4KW10013117.

ObsoleteN/A60003118.CU SHIM .002 THICK37000719.CU SHIM .005 THICK37001520.CU SHIM .010 THICK37002321.CU CAP05458522.*Notes: Oil Type 80-90W Capacity 2.5 Pints



Gearbox (826-029C) Curtis

Applies to OS1548

10550



Gearbox (826-029C) Curtis I.D.Tag No. 924514)



Drawing Image NumberDwg 10550GEARBOX OVERSEEDER826-029CGEARBOX OVERSEEDER ORANGE826-029C82*CU HOUSING0001741.

ObsoleteCU PIPE PLUG SQ HD 1/2 NPT VT4101752.CU PLASTIC HOLE PLUG6504083.CU PIPE PLUG 1/24100274.RETAINING RING6200705.THRUST COLLAR4500566.


CURTIS SHAFT2197589.CU GASKET .015 THICK39002110.CU GASKET .005 THICK39003911.CU GASKET .003 THICK39019512.CU THRU CAP05461913.CU HHCS FLG 5/16-18 X141016714.CU SEAL 1.375 X 2 X .31330008715.CU INPUT SHAFT21976616.CU GEAR 21TOOTH,1 3/8ID,5/16KW10056017.

ObsoleteCU KEY 5/16 X 1.13 LG HARDENED60022118.CU SHIM .005 THICK37001519.CU SHIM .010 THICK37002320.CU BLANK CAP05459321.




Gearbox (826-029C) Curtis I.D.Tag No. 924514)


10498



Rear Roller Drive Assembly (S/N 166723-)



Drawing Image Numberdwg10498ROLLER DRIVE CHAIN GUARD308-205H1.WASHER LOCK SPRING 5/16 PLT804-009C2.HHCS 5/16-18X6 GR5802-316C3.PIN COTTER 7/64 X 1 LONG805-064C4.WASHER FLAT 1/2 SAE PLT804-016C5.NO. 40 12T IDLER SPKT.817-025C6.ROLLER DRIVE IDLER ARM308-203H7.HHCS 1/2-13X3 3/4 GR5802-042C8.NUT HEX 1/2-13 PLT803-020C9.SPRING EXT LOCK ARM807-043C10.NUT LOCK 5/8-11 PLT803-024C11.SOLID LINK LOWER CLEVIS308-209H12.SOLID LINK TURNBUCKLE BODY308-208H13.NUT HEX JAM 3/4-10 PLT803-048C14.SOLID LINK UPPER LINK308-210H15.HHCS 5/8-11X1 3/4 GR5802-053C16.WASHER LOCK SPRING 5/8 PLT804-022C17.WASHER FLAT 5/8 SAE PLT804-021C18.SNAP RING INT 1.812800-070C19.BEARING 204 DOUBLE SEAL DD822-067C20.

Rev. 3(S/N 222276+)REAR RLR DOUBLE SPKT 19/35T308-199H21.Rev. 2 not compat. w/Rev. 1.(S/N 124696166723)REAR ROLLER 19T-30T SPKT WDMT308-285H21.Rev. 1(S/N 124695-)REAR RLR DOUBLE SPKT 19/35T308-199H21.

DOUBLE SPROCKET PIN WELDMENT308-198H22.Rev. 2RPBY 803-008C and 804-009C.NUT HEX NYLOCK 5/16-18 PLT803-084C23.Rev 1; Use up stockNUT HEX 5/16-18 PLT803-008C23.

HHCS 5/16-18X2 GR5802-115C24.HFSS 1/4-20X1/2 GR5802-148C25.

Rev. 2 not compat. w/Rev. 1.(S/N 124695-)HHCS 1/2-13X5 1/2 GR5802-046C26.Rev. 1(S/N 124696166723)HHCS 1/2-13X5 GR5802-045C26.

HHCS 1/2-13X2 1/4 GR5802-038C27.WASHER LOCK SPRING 1/2 PLT804-015C28.LONG ARM CHAIN GUARD WELDMENT308-206H29.HHSC 5/16-18X3 GR5802-131C30.JACK SHAFT - KEY109-031D31.

(S/N 222276+)SPKT 40B17 X 1 BORE W/KW & SS808-159C32.Rev. 4(S/N 124695166723)SPKT 40B19X1 B MAX .875 THRU808-125C32.Rev. 3 not compat. w/Rev. 2;Use up existing stock.

(S/N 124695166723)RPBY 808-125C152-312D32.

Rev. 2 not compat. w/Rev. 1.(S/N 103331124695)SPKT 40B17 X 1 BORE W/KW & SS808-159C32.Rev 1; Use up stock(S/N 103330-)RPBY 152-312D808-052C32.

Used for short roller arm.CHAIN RL #40 X 174 PITCH809-113C33.Used for long roller arm.CHAIN RL #40 X 194 PITCH809-114C33.

HHCS 5/8-11X1 3/4 GR5802-053C34.HHCS 5/8-11X2 3/4 GR5802-281C35.SHORT ARM CHAIN GUARD WELDMENT308-207H36.

Rev. 3(S/N 222276+)REAR RLR DBLE SPKT ASSY 19/35T308-200K37.Rev. 2 not compat. w/Rev. 1.(S/N 124696166723)REAR ROLLER 19T-30T SPKT ASSY308-287K37.Rev. 1Includes 1 each of items 19 thru 21REAR RLR DBLE SPKT ASSY 19/35T(S/N

124695-)308-200K37.

BUSHING PIVOT PIN 1 1/2 ID890-126C38.



Rear Roller Drive Assembly (S/N 166723-)


14719



Rear Roller Drive Assembly (S/N 166724+)



Drawing Image Numberdwg14719ROLLER DRIVE CHAIN GUARD308-205H1.ROLLER DRIVE CHAIN GRD ORANGE308-205H821.WASHER LOCK SPRING 5/16 PLT804-009C2.HHCS 5/16-18X6 GR5802-316C3.PIN COTTER 7/64 X 1 LONG805-064C4.WASHER FLAT 1/2 SAE PLT804-016C5.NO. 40 12T IDLER SPKT.817-025C6.ROLLER DRIVE IDLER ARM308-203H7.HHCS 1/2-13X3 3/4 GR5802-042C8.NUT HEX 1/2-13 PLT803-020C9.SPRING EXT LOCK ARM807-043C10.NUT LOCK 5/8-11 PLT803-024C11.SOLID LINK LOWER CLEVIS308-209H12.SOLID LINK TURNBUCKLE BODY308-208H13.NUT HEX JAM 3/4-10 PLT803-048C14.SOLID LINK UPPER LINK308-210H15.HHCS 5/8-11X1 3/4 GR5802-053C16.WASHER LOCK SPRING 5/8 PLT804-022C17.WASHER FLAT 5/8 SAE PLT804-021C18.SNAP RING INT 1.812800-070C19.BEARING 204 DOUBLE SEAL DD822-067C20.

Rev. 2 not compat. w/Rev. 1.(S/N 222276+)REAR RLR DOUBLE SPKT 19/35T308-199H21.Rev. 1(S/N 222275-)REAR ROLLER 19T-30T SPKT WDMT308-285H21.

DOUBLE SPROCKET PIN WELDMENT308-198H22.(OS1548 S/N 999543-)(OS1572 S/N999754-)

NUT HEX NYLOCK 5/16-18 PLT803-084C23.

(OS1548 S/N 999543-)(OS1572 S/N999754-)

HHCS 5/16-18X2 GR5802-115C24.

HFSS 1/4-20X1/2 GR5802-148C25.HHCS 1/2-13X5 GR5802-045C26.HHCS 1/2-13X2 1/4 GR5802-038C27.WASHER LOCK SPRING 1/2 PLT804-015C28.REAR ROLLER FRONT GUARD WDNT308-308H29.HHSC 5/16-18X3 GR5802-131C30.JACK SHAFT - KEY109-031D31.

Rev. 3 not compat. w/Rev. 2.(S/N 222276+)SPKT 40B17 X 1 BORE W/KW & SS808-159C32.Rev. 2(S/N 222275-)SPKT 40B19X1 B MAX .875 THRU808-125C32.Rev 1; Use up stockRPBY 808-125C152-312D32.

Used with short arm.CHAIN RL #40 X 174 PITCH809-113C33.Used with long arm.CHAIN RL #40 X 194 PITCH809-114C33.

HHCS 5/8-11X1 3/4 GR5802-053C34.HHCS 5/8-11X2 3/4 GR5802-281C35.REAR ROLLER REAR GUARD WDMT308-309H36.REAR ROLLER REAR GUARD ORANGE308-309H8236.

Rev. 2 not compat. w/Rev. 1.(S/N 222276+)REAR RLR DBLE SPKT ASSY 19/35T308-200K37.Rev. 1(S/N 222275-)REAR ROLLER 19T-30T SPKT ASSY308-287K37.Rev. 2 not compat. w/Rev. 1.(S/N 222276+)CHAIN RL #40 X 132 PITCHES809-112C38.Rev. 1(S/N 222275-)CHAIN RL #40 X 128 PITCHES809-090C38.Rev. 2 not compat. w/Rev. 1.(S/N 222276+)CHAIN RL #40 X 8 PITCHES809-091C38.Rev. 1(S/N 222275-)CHAIN RL #40 X 6 PITCH W/CON809-154C38.

PIN COTTER 7/64 X 1 LONG805-064C39.WASHER FLAT 1/2 SAE PLT804-016C40.NO. 40 12T IDLER SPKT.817-025C41.

Rev. 1; Rev. 3(S/N 222276+) (S/N 124695-)DRIVE IDLER ARM308-107H42.Rev. 2 not compat. w/Rev. 1.(S/N 124696 222275)DRIVE IDLER ARM-SHORT308-283H42.

LOWER CHAIN TENSIONER ASSY308-128S43.SPRING EXT IDLER807-025C44.



Rear Roller Drive Assembly (S/N 166724+)


RevisionCommentsPart DescriptionPart No.Ref.HHCS 1/2-13X2 3/4 GR5802-226C45.HHCS 1/4-20X2 1/2 GR5802-097C46.NUT HEX 1/4-20 PLT803-006C47.WASHER LOCK SPRING 1/4 PLT804-006C48.WASHER FLAT 5/16 USS PLT804-010C49.BUSHING PIVOT PIN 1 1/2 ID890-126C50.

(OS1548 S/N 999544+)(OS1572 S/N999755+)

WASHER 1.875ODX1.505ID-078804-068C51.

(OS1548 S/N 999544+)(OS1572 S/N999755+)

PIN ROLL 5/16 X 2 1/4 PLT805-029C52.



Rear Roller Drive Assembly (S/N 166724+) (continued)





Rear Roller Drive Assembly (S/N 166724+) (continued)


10530



Rotor Drive Assembly (S/N 89962-)

Applies to OS1548


Drawing Image NumberDwg 10530OS1548 NON-DRIVE ROTOR FLANGE308-101H1.ROTOR SPACER TUBE 2-48308-154D2.ROTOR SPACER TUBE - 3308-112D2.ROTOR SPACER TUBE 4-48308-155D2.HHCS 7/16-20X1 1/4 GR8802-227C3.3-POINT OVERSEEDER BLADE308-082D4.BLADE HUB PLATE308-110D5.NUT HEX 7/16-20 TOP STK GRBPLT803-108C6.

Rev. 2OS1548 ROTOR AXLE WLDMT & MACH308-276E7.Rev 1; Use up stockRPBY 308-276E308-079H7.

SEAL 2 X 3.1875 X 0.469816-084C8.NUT HEX 1/2-13 PLT803-020C9.WASHER LOCK SPRING 1/2 PLT804-015C10.BOTTOM BRG MOUNT 15 TILLER311-015D11.15 TILLER LH BOTTOM BRG GASKET816-071C12.BEARING 308822-084C13.SNAP RING INT 90 MM800-078C14.ROTOR DRIVE HUB 48OS308-142D15.HHCS 1/2-13X1 3/4 GR5802-082C16.GREASE ZERK 1/4-28 X 90-DEG800-073C17.RH BRG COVER 10/15 TILLER311-021D18.GASKET BRG MNT 10/15 TILLER816-070C19.RH BRG MOUNT PLATE 4'OS308-169D20.SNAP RING EXT 1 3/8 5100-137800-079C21.SNAP RING INT 3.523 OD800-053C22.BEARING 307822-082C23.RH BOTTOM BRG MNT 10/15 TILR311-042D24.SEAL 1.75 X 2.75 X .313816-068C25.SCREW SET 1/4-28 SH X 1/2 LG801-009C26.NON-DRIVE SEAL GUARD HUB308-160D27.HHCS 1/2-13X2 GR5802-128C28.HHCS 1/2-13X1 1/2 GR5802-091C29.HHCS 1/2-13X1 1/4 GR5802-034C30.CHAIN RL #80X44 HIGH TENSILE809-083C31.CONNECTOR #80 HIGH TENSILE809-089C32.SPKT 80B16 16/32-23 SPLINE808-093C33.NUT LT JAM 1 1/4-12 NYLN INSRT803-155C34.WASHER FLAT 1/2 SAE PLT804-016C35.PIN COTTER 3/16 X 1805-069C36.CHAIN TENSIONER ADJUSTER308-171D37.CHAIN TIGHTENER 10/15 TILR807-062C38.GASKET CHAIN GRD 10/15 TILR816-069C39.CHAIN GUARD WELDMT 10/15 TILR311-012H40.DRAIN PLUG 3/4-16 UNF PLATED800-066C41.HFSS 1/4-20X3/4 GR5802-257C42.NUT LT JAM 1 1/8-12 NYLN INSRT803-153C43.SPKT 80B12 1 3/8-21808-092C44.WASHER LOCK SPRING 7/8 PLT804-037C45.NUT HEX FLANGE 7/8-14 UNF PLT803-157C46.NUT LOCK 1/4-20 PLT803-007C47.BEARING MOUNT 10/15 TILLER311-014D48.DRIVE SHAFT 1042/34 TILLER311-008H49.

Rev. 2DRIVE SHAFT GUARD RTA1034/42311-182H50.Rev 1; Use up stockRPBY 311-182H311-029H50.

HFSS 5/16-18X1 3/4 GR5802-094C51.GEARBOX OVERSEEDER826-029C52.HHCS 1/2-13X3/4 GR5802-032C53.




Applies to OS1548

RevisionCommentsPart DescriptionPart No.Ref.DRIVE SHAFT GUARD RTA1034/42311-182H54.FAIRWAY SPECIAL 10 GA BLADE308-364D55.WASHER LOCK 7/16 PLT804-014C56.NUT HEX 7/16-20 PLT803-115C57.WASHER FLAT 5/16 USS PLT804-010C58.GRS SHELL GADUS S2 V22000 32OZ821-045C59.



Rotor Drive Assembly (S/N 89962-) (continued)

Applies to OS1548





Applies to OS1548

12867



Rotor Drive Assembly (S/N 89963 To 166723)

Applies to OS1548


Drawing Image Numberdwg12867GRS SHELL GADUS S2 V22000 32OZ821-045C1.GEARBOX OVERSEEDER826-029C2.OS1548 DRIVE SHAFT WELDMENT308-274H3.NUT HEX 1/2-13 PLT803-020C4.WASHER LOCK SPRING 1/2 PLT804-015C5.SEAL 1.75 X 2.75 X .313816-068C6.BEARING MOUNT 10/15 TILLER311-014D7.

Includes 1 each of items 6; 7; 9 & 10.BRG HOUSING ASSY 10/15 TLR311-041S7.GASKET BRG MNT 10/15 TILLER816-070C8.BEARING 307822-082C9.SNAP RING INT 3.523 OD800-053C10.NUT HEX LOCK 1/4-20 FLG803-088C11.HHCS 1/2-13X1 1/2 GR5802-091C12.SPKT 80B13 1 3/8 X 21 SPLINE808-133C13.NUT LT JAM 1 1/8-12 NYLN INSRT803-153C14.GASKET CHAIN GRD RTA25/35816-092C15.FILL PLUG VENTED 3/4-16 PLT800-094C16.CHAIN GUARD WELDMENT RTA25/35311-098H17.HFSS 1/4-20X3/4 GR5802-257C18.DRAIN PLUG 3/4-16 UNF PLATED800-066C19.NUT HEX JAM 5/8-11 PLT803-023C20.HHCS 5/8-11X4 GR5 FTHD802-286C21.NUT LT JAM 1 1/2-12 NYLN INSRT803-111C22.SPKT 80B17 12/24X20T SPLINE808-132C23.SNAP RING EXT .591800-074C24.CHAIN RL #80 X 46 HIGH TENSILE809-132C25.CONNECTOR #80 HIGH TENSILE809-089C26.CHAIN IDLER ARM RTA25/35311-203D27.CHAIN TIGHTNER PIVOT RTA25/35311-200D28.NUT HEX FLANGE 5/8-18 PLT803-089C29.HHCS 1/2-13X1 GR5802-258C30.ROTOR DRIVE HUB OS1572308-141D31.NUT HEX 7/16-20 TOP STK GRBPLT803-108C32.OS1548 ROTOR AXLE WLDMT & MACH308-276E33.3-POINT OVERSEEDER BLADE308-082D34.HHCS 7/16-20X1 GR5802-309C35.WASHER LOCK 7/16 PLT804-014C36.HHCS 7/16-20X1 1/4 GR8802-227C37.SNAP RING INTERNAL 3.938800-017C38.BEARING 309822-079C39.GASKET RTA25/35816-094C40.LH LOWER BRG MOUNT RTA25311-197D41.

Includes 1 each of items 38; 39; 41& 42.

BEARING ASSY-LH RTA25/RH RTR25311-110S41.

SEAL 2.25 X 3.5 X .438816-091C42.ROTOR SPACER TUBE 2-48308-154D43.ROTOR SPACER TUBE - 3308-112D43.ROTOR SPACER TUBE 4-48308-155D43.BLADE HUB PLATE308-110D44.OS1548 NON-DRIVE ROTOR FLANGE308-101H45.NON-DRIVE SEAL GUARD HUB308-160D46.SCREW SET 1/4-28 SH X 1/2 LG801-009C47.RH BOTTOM BRG MNT 10/15 TILR311-042D48.

Includes 1 each of items 6; 9; 10 &48.

RH BOTTOM BRG ASSY 10/15 TLR311-042S48.

SNAP RING EXT 1 3/8 5100-137800-079C49.RH BRG MOUNT PLATE 4'OS308-169D50.




Applies to OS1548

RevisionCommentsPart DescriptionPart No.Ref.RH BRG COVER 10/15 TILLER311-021D51.GREASE ZERK 1/4-28 X 90-DEG800-073C52.HHCS 1/2-13X1 1/4 GR5802-034C53.HHCS 1/2-13X1 3/4 GR5802-082C54.WASHER FLAT 5/8 USS PLT804-019C55.WASHER LOCK 7/16 PLT804-014C56.NUT HEX 7/16-20 PLT803-115C57.DECAL IMPORTANT-NO LUBRICATION819-069C58.FAIRWAY SPECIAL 10 GA BLADE308-364D59.



Rotor Drive Assembly (S/N 89963 To 166723) (continued)

Applies to OS1548





Applies to OS1548

14717



Rotor Drive Assembly (S/N 166724+)

Applies to OS1548


Drawing Image NumberDwg 14717GRS SHELL GADUS S2 V22000 32OZ821-045C1.GEARBOX OVERSEEDER826-029C2.OS1548 DRIVE SHAFT WELDMENT308-274H3.RTA34/42 OS48/DRIVE SHFT ORANGE308-274H823.NUT HEX 1/2-13 PLT803-020C4.WASHER LOCK SPRING 1/2 PLT804-015C5.SEAL 1.75 X 2.75 X .313816-068C6.BEARING MOUNT 10/15 TILLER311-014D7.

Includes 1 each of items 6; 7; 9 & 10.HSG, 1.37ID X 4 BOLT,1.75 SEAL822-254C7.GASKET BRG MNT 10/15 TILLER816-070C8.BEARING 307822-082C9.SNAP RING INT 3.523 OD800-053C10.NUT HEX LOCK 1/4-20 FLG803-088C11.HHCS 1/2-13X1 1/2 GR5802-091C12.SPKT 80B13 1 3/8 X 21 SPLINE808-133C13.NUT LT JAM 1 1/8-12 NYLN INSRT803-153C14.GASKET CHAIN GRD RTA25/35816-092C15.FILL PLUG VENTED 3/4-16 PLT800-094C16.CHAIN GUARD WELDMENT RTA25/35311-098H17.CHN GRD WDMNT ORANGE311-098H8217.HFSS 1/4-20X3/4 GR5802-257C18.DRAIN PLUG 3/4-16 UNF PLATED800-066C19.NUT HEX JAM 5/8-11 PLT803-023C20.HHCS 5/8-11X4 GR5 FTHD802-286C21.NUT LT JAM 1 1/2-12 NYLN INSRT803-111C22.SPKT 80B17 12/24X20T SPLINE808-132C23.SNAP RING EXT .591800-074C24.CHAIN RL #80 X 46 HIGH TENSILE809-132C25.CONNECTOR #80 HIGH TENSILE809-089C26.CHAIN IDLER ARM RTA25/35311-203D27.CHAIN TIGHTNER PIVOT RTA25/35311-200D28.NUT HEX FLANGE 5/8-18 PLT803-089C29.HHCS 1/2-13X1 GR5802-258C30.ROTOR DRIVE HUB OS1572308-141D31.NUT HEX 7/16-20 TOP STK GRBPLT803-108C32.OS1548 ROTOR AXLE WLDMT & MACH308-276E33.

80 Ea. per Unit 3" Spacing, 115 Ea.per Unit 2" Spacing

3-POINT OVERSEEDER BLADE308-082D34.

HHCS 7/16-20X1 GR5802-309C35.WASHER LOCK 7/16 PLT804-014C36.HHCS 7/16-20X1 1/4 GR8802-227C37.SNAP RING INTERNAL 3.938800-017C38.BEARING 309822-079C39.GASKET RTA25/35816-094C40.LH LOWER BRG MOUNT RTA25311-197D41.



SEAL 2.25 X 3.5 X .438816-091C42.ROTOR SPACER TUBE 2-48308-154D43.ROTOR SPACER TUBE - 3308-112D43.ROTOR SPACER TUBE 4-48308-155D43.BLADE HUB PLATE308-110D44.OS1548 NON-DRIVE ROTOR FLANGE308-101H45.NON-DRIVE SEAL GUARD HUB308-160D46.SCREW SET 1/4-28 SH X 1/2 LG801-009C47.RH BOTTOM BRG MNT 10/15 TILR311-042D48.




Applies to OS1548

RevisionCommentsPart DescriptionPart No.Ref.Includes 1 each of items 6; 9; 10 &48.

HSG, 1.37ID X 4 BOLT,1.75 SEAL822-255C48.

SNAP RING EXT 1 3/8 5100-137800-079C49.RH BEARING MOUNT PLATE308-385D50.RH BEARING MOUNT PLATE ORANGE308-385D8250.RH BRG COVER 10/15 TILLER311-021D51.RH BRG COVER ORANGE311-021D8251.GREASE ZERK 1/4-28 X 90-DEG800-073C52.HHCS 1/2-13X1 1/4 GR5802-034C53.HHCS 1/2-13X1 3/4 GR5802-082C54.WASHER FLAT 5/8 USS PLT804-019C55.WASHER LOCK 7/16 PLT804-014C56.DECAL IMPORTANT-NO LUBRICATION819-069C57.

80 Ea. per Unit 3" Spacing, 115 Ea.per Unit 2" Spacing

FAIRWAY SPECIAL 10 GA BLADE308-364D58.

S/N 123287+RHSSNB 1/2-13X1 1/2 GR5802-477C59.S/N 123286-HHCS 1/2-13X1 1/2 GR5802-091C59.



Rotor Drive Assembly (S/N 166724+) (continued)

Applies to OS1548





Applies to OS1548

14718




Applies to OS1572


Drawing Image Numberdwg14718GRS SHELL GADUS S2 V22000 32OZ821-045C1.GEARBOX OVERSEEDER826-029C2.DRIVE SHAFT WELDMENT OS1572308-172H3.NUT HEX 1/2-13 PLT803-020C4.WASHER LOCK SPRING 1/2 PLT804-015C5.SEAL 1.75 X 2.75 X .313816-068C6.BEARING MOUNT 10/15 TILLER311-014D7.

Includes 1 each of items 6; 7; 9 & 10.HSG, 1.37ID X 4 BOLT,1.75 SEAL822-254C7.GASKET BRG MNT 10/15 TILLER816-070C8.BEARING 307822-082C9.SNAP RING INT 3.523 OD800-053C10.NUT HEX LOCK 1/4-20 FLG803-088C11.HHCS 1/2-13X1 1/2 GR5802-091C12.SPKT 11T #100 16/32x21T SPLINE808-109C13.NUT LT JAM 1 1/8-12 NYLN INSRT803-153C14.GASKET CHAIN GRD RTA25/35816-092C15.FILL PLUG VENTED 3/4-16 PLT800-094C16.CHAIN GUARD WELDMENT RTA25/35311-098H17.HFSS 1/4-20X3/4 GR5802-257C18.DRAIN PLUG 3/4-16 UNF PLATED800-066C19.NUT HEX JAM 5/8-11 PLT803-023C20.HHCS 5/8-11X4 GR5 FTHD802-286C21.NUT LT JAM 1 1/2-12 NYLN INSRT803-111C22.SPKT 15T #100 12/24X20T SPLINE808-110C23.SNAP RING EXT .591800-074C24.CHAIN RL #100 X 38 PITCH809-111C25.#100 CONNECTOR LINK809-097C26.CHAIN IDLER ARM RTA25/35311-203D27.CHAIN TIGHTNER PIVOT RTA25/35311-200D28.NUT HEX FLANGE 5/8-18 PLT803-089C29.HHCS 1/2-13X1 GR5802-258C30.ROTOR DRIVE HUB OS1572308-141D31.NUT HEX 7/16-20 TOP STK GRBPLT803-108C32.OS1572 ROTOR AXLE WLDMT & MACH308-277E33.

115 Ea. per Unit 3" Spacing, 170 Ea.oer Unit 2" Spacing

3-POINT OVERSEEDER BLADE308-082D34.

HHCS 7/16-20X1 GR5802-309C35.WASHER LOCK 7/16 PLT804-014C36.HHCS 7/16-20X1 1/4 GR8802-227C37.SNAP RING INTERNAL 3.938800-017C38.BEARING 309822-079C39.GASKET RTA25/35816-094C40.LH LOWER BRG MOUNT RTA25311-197D41.



SEAL 2.25 X 3.5 X .438816-091C42.ROTOR SPACER TUBE - 2308-111D43.ROTOR SPACER TUBE - 3308-112D43.ROTOR SPACER TUBE - 4308-113D43.BLADE HUB PLATE308-110D44.OS1548 NON-DRIVE ROTOR FLANGE308-101H45.NON-DRIVE SEAL GUARD HUB308-160D46.SCREW SET 1/4-28 SH X 1/2 LG801-009C47.RH BOTTOM BRG MNT 10/15 TILR311-042D48.


HSG, 1.37ID X 4 BOLT,1.75 SEAL822-255C48.

SNAP RING EXT 1 3/8 5100-137800-079C49.




Applies to OS1572

RevisionCommentsPart DescriptionPart No.Ref.RH BEARING MOUNT PLATE308-385D50.RH BRG COVER 10/15 TILLER311-021D51.GREASE ZERK 1/4-28 X 90-DEG800-073C52.HHCS 1/2-13X1 1/4 GR5802-034C53.HHCS 1/2-13X1 3/4 GR5802-082C54.WASHER LOCK 7/16 PLT804-014C55.DECAL IMPORTANT-NO LUBRICATION819-069C56.

115 Ea. per Unit 3" Spacing, 170 Ea.oer Unit 2" Spacing

FAIRWAY SPECIAL 10 GA BLADE308-364D57.




Applies to OS1572





Applies to OS1572

10384




Applies to OS1572


Drawing Image NumberDwg 10384Includes 1 each of items 1; 2; 4; 5 &6.

NON-DRIVE BRG AND HUB ASSEMBLY308-039K

EXPANSION PLUG 2 1/2800-071C1.ZERK 1/4-18 NPT800-022C2.HHCS 7/16-20X1 1/4 GR8802-227C3.HUB NON-DRIVE308-033H4.BEARING 1 3/8 B X 2.835 OD SS822-077C5.SNAP RING INT 2.835800-069C6.GASKET DRIVE BRG. HUB816-061C7.WASHER LOCK 7/16 PLT804-014C8.NUT HEX 7/16-20 PLT803-115C9.ROTOR NON-DRIVE FLANGE WLDMT308-030H10.ROTOR SPACER TUBE - 2308-111D11.ROTOR SPACER TUBE - 3308-112D11.ROTOR SPACER TUBE - 4308-113D11.BLADE HUB PLATE308-110D12.3-POINT OVERSEEDER BLADE308-082D13.ROTOR AXLE WELDMENT308-035H14.NUT HEX 7/16-20 TOP STK GRBPLT803-108C15.HHCS 7/16-20X1 1/2 GR8802-229C16.

Includes 1 each of items 17 thru 21.ROTOR DRIVE BRG & SPINDLE ASSY308-038K16.DRIVE HUB & SPINDLE WELDMENT308-032H17.

ObsoleteHUB ROTOR DRIVE308-034H18.SEAL OIL 2 3/16 ID X 3 1/2 OD816-059C19.BEARING 309822-079C20.SNAP RING INTERNAL 3.938800-017C21.PIN IDLER MOUNTING805-138C22.

Rev. 2CHAIN IDLER ARM RTA25/35311-203D23.Rev 1; Use up stockRPBY 311-203D812-106C23.

SNAP RING EXT .591800-074C24.CHAIN RL NO. 100 X 39 PITCH809-074C25.#100 CONNECTOR LINK809-097C26.SPKT 15 T #100 1 3/4 SPLND808-066C27.NUT LT JAM 1 1/2-12 NYLN INSRT803-111C28.GASKET CHAIN COVER OVERSEEDER816-062C29.PLUG DRAIN 1/2-14 WITH GASKET800-072C30.CHAIN GUARD OVERSEEDER890-159C31.HHCS M18x2.5x130 DIN933 FTHD802-230C32.NUT HEX METRIC M18803-112C33.HHCS 5/16-18X3/4 GR5802-007C34.RPBY 811-320C&321C811-284C35.SNAP RING EXT 1 3/8800-068C36.SPKT 11 T #100 1 3/8 SPLND808-065C37.RHSNB 1/2-13X2 1/4 GR5802-250C38.NUT HEX METRIC M16 X 1.5 NYLCK803-113C39.WASHER LOCK SPRING 5/16 PLT804-009C40.NUT HEX 5/16-18 PLT803-008C41.WASHER 1 3/8 X 2 X 1/8804-069C42.GASKET UPPER BEARING816-060C43.

Rev. 3BRG 1 3/8 B X 72MM OD W/COLLAR822-100C44.Use up stock; Rev. 2 notcompat. w/Rev. 1.

REP BY 822-100C822-097C44.

Rev. 1BEARING 1 3/8 B 4-BOLT FLANGE822-078C44.SEAL 1 3/8 ID X 2 OD X 5/16816-073C45.HUB 4BOLT WMT308-138H46.WASHER LOCK SPRING 1/2 PLT804-015C47.NUT HEX FLANGE 5/8-11 PLT803-196C48.




Applies to OS1572

RevisionCommentsPart DescriptionPart No.Ref.Rev. 2OS1572 GB W/SHAFT (S/N 35088-)308-352S49.Rev. 1RPBY 308-352S826-010C49.

GEARBOX MOUNTING PLATE308-042D50.HHCS 3/8-16X1 1/4 GR5802-079C51.WASHER FLAT 3/8 SAE PLT804-012C52.HHCS 1/2-13X1 GR5802-258C53.WASHER LOCK SPRING 3/8 PLT804-013C54.NUT HEX 3/8-16 PLT803-014C55.

Use with 822-097C only.GREASE ZERK STRAIGHT 1/4-28800-001C56.AD 1/2MNPT 1/8FNPT811-321C57.NUT HEX 7/16-20 PLT803-115C58.WASHER LOCK 7/16 PLT804-014C59.FAIRWAY SPECIAL 10 GA BLADE308-364D60.

Rev. 2 not compat. w/Rev. 1.Includes 1 each of items 44; 45; 46& 56.

UPPER BEARING SUB-ASSY308-139S61.

Rev. 1BRG SEAL ASSY RELBY 308-137A308-072K61.Includes items 42, 47, 48 & 61HUB 4BOLT UPPER ASY W/SEAL308-137A62.

RPBY 308-137A308-139D63.GRS SHELL GADUS S2 V22000 32OZ821-045C64.




Applies to OS1572





Applies to OS1572

12870




Applies to OS1572


Drawing Image Numberdwg12870GRS SHELL GADUS S2 V22000 32OZ821-045C1.GEARBOX OVERSEEDER826-029C2.OS1572 GB EXTENSION308-353H3.NUT HEX 1/2-13 PLT803-020C4.WASHER LOCK SPRING 1/2 PLT804-015C5.SEAL 1.75 X 2.75 X .313816-068C6.BEARING MOUNT 10/15 TILLER311-014D7.

Includes 1 each of items 6; 7; 9 & 10.BRG HOUSING ASSY 10/15 TLR311-041S7.GASKET BRG MNT 10/15 TILLER816-070C8.BEARING 307822-082C9.SNAP RING INT 3.523 OD800-053C10.NUT HEX LOCK 1/4-20 FLG803-088C11.HHCS 1/2-13X1 1/2 GR5802-091C12.SPKT 11T #100 16/32x21T SPLINE808-109C13.SNAP RING EXT 1 3/8800-068C14.GASKET CHAIN GRD RTA25/35816-092C15.FILL PLUG VENTED 3/4-16 PLT800-094C16.CHAIN GUARD WELDMENT RTA25/35311-098H17.HFSS 1/4-20X3/4 GR5802-257C18.DRAIN PLUG 3/4-16 UNF PLATED800-066C19.NUT HEX JAM 5/8-11 PLT803-023C20.HHCS 5/8-11X4 GR5 FTHD802-286C21.NUT LT JAM 1 1/2-12 NYLN INSRT803-111C22.SPKT 15T #100 12/24X20T SPLINE808-110C23.SNAP RING EXT .591800-074C24.CHAIN RL #100 X 38 PITCH809-111C25.#100 CONNECTOR LINK809-097C26.CHAIN IDLER ARM RTA25/35311-203D27.CHAIN TIGHTNER PIVOT RTA25/35311-200D28.NUT HEX FLANGE 5/8-18 PLT803-089C29.HHCS 1/2-13X1 GR5802-258C30.ROTOR DRIVE HUB OS1572308-141D31.NUT HEX 7/16-20 TOP STK GRBPLT803-108C32.

Rev. 2(S/N 85168+)OS1572 ROTOR AXLE WLDMT & MACH308-277E33.Rev. 1(S/N 85167-)RPBY 308-277E308-179H33.

3-POINT OVERSEEDER BLADE308-082D34.HHCS 7/16-20X1 GR5802-309C35.WASHER LOCK 7/16 PLT804-014C36.HHCS 7/16-20X1 1/4 GR8802-227C37.SNAP RING INTERNAL 3.938800-017C38.BEARING 309822-079C39.GASKET RTA25/35816-094C40.LH LOWER BRG MOUNT RTA25311-197D41.



SEAL 2.25 X 3.5 X .438816-091C42.ROTOR SPACER TUBE - 2308-111D43.ROTOR SPACER TUBE - 3308-112D43.ROTOR SPACER TUBE - 4308-113D43.BLADE HUB PLATE308-110D44.OS1548 NON-DRIVE ROTOR FLANGE308-101H45.NON-DRIVE SEAL GUARD HUB308-160D46.SCREW SET 1/4-28 SH X 1/2 LG801-009C47.RH BOTTOM BRG MNT 10/15 TILR311-042D48.


RH BOTTOM BRG ASSY 10/15 TLR311-042S48.

SNAP RING EXT 1 3/8 5100-137800-079C49.




Applies to OS1572

RevisionCommentsPart DescriptionPart No.Ref.RH BRG MOUNT PLATE 4'OS308-169D50.RH BRG COVER 10/15 TILLER311-021D51.GREASE ZERK 1/4-28 X 90-DEG800-073C52.HHCS 1/2-13X1 1/4 GR5802-034C53.HHCS 1/2-13X1 3/4 GR5802-082C54.WASHER LOCK 7/16 PLT804-014C55.NUT HEX 7/16-20 PLT803-115C56.DECAL IMPORTANT-NO LUBRICATION819-069C57.FAIRWAY SPECIAL 10 GA BLADE308-364D58.




Applies to OS1572





Applies to OS1572

73043


Table of Contents Part Number IndexLand Pride Section 5: DrivelinesOS15 SERIES

Driveline (826-891C) Comer



Image No.Dwg 73043DRVLN C3 20 1.38-6 QD CLTCH826-891C*COMPLETE COLLAR YOKE C12 COMER14102536311.CROSS JOURNAL SET COMER1800151302.CO COMPLETE DISC CLUTCH F2614625201613.CO GRD RET COLLAR OUTER TUBE81800152884.

ObsoleteRPBY 180.014.24081800142405.CO GRD RET COLLAR INNER TUBE81800152896.CO COMP GUARD W / INST. MANUAL14225039675217.

ObsoleteRPBY 180.014.0221800140228.CO FLANGED YOKE15101503819.

ObsoleteRPBY 180.019.01918001901910.ObsoleteRPBY 180.019.01818001901811.

CO TAPERED PIN SET 1 3/8"165.000.58812.CLUTCH SUPPORT F26 COMER151016193113.

ObsoleteRPBY 180.019.01418001901414.ObsoleteRPBY 180.019.116.1180019116115.ObsoleteRPBY 165.000.54916500054916.

CO HALF F. SHAFT WITH GUARDING81233502081117.CO HALF MALE SHAFT WITH GUARD81234503531118.

ObsoleteRPBY 190.000.09819000009819.ObsoleteRPBY 190.000.09919000009920.ObsoleteRPBY 165.000.62816500062821.

CO LABEL WITH CUST CODE190000100522.


Table of Contents Part Number IndexSection 5: Drivelines Land PrideOS15 SERIES

Driveline (826-891C) Comer


21303



Driveline Slip Clutch (1465603) Eurocardan



Drawing Image NumberDwg 21303ObsoleteRPBY 14657031465603

*EC PULL COLLAR KIT10042251.RPBY 6040818 & 640290160408162.EC CLOSURE FLANGE11340123.EC SPRING KIT (R450Nm)12169134.EC PRESSURE FLANGE11340115.EC FRICTION DISC18060106.EC HUB WITH FLANGE 1.38-617060857.EC INT. FLANGE11360088.EC HUB DISC11360109.EC CLUTCH BUSHING170500910.EC OUTER BODY FOR BD4/5146500111.





35937




Applies to OS1572


Image No.Dwg 35937EC BD4/5 1000NM PULL EVOLUTION1465703*EC PULL COLLAR KIT EVOLUTION10042271.EC SCREW M8X18 (GRADE 10.9)60408182.EC WASHER 8.5X14X264029013.EC CLOSURE FLANGE11340124.EC SPRING KIT BD2/4-450/1000NM12169135.EC PRESSURE FLANGE11340116.EC FRICTION DISC18060107.EC HUB WITH FLANGE 1.38-617060858.EC INT. FLANGE11360089.EC HUB DISC113601010.EC CLUTCH BUSHING170500911.EC OUTER BODY FOR BD4/5146500112.




Applies to OS1572

10139



Driveline Slip Clutch (317189) Waltersheid

Applies to OS1548


Drawing Image NumberDwg 10139

Overseeder - Land Pride · Ref. Part No. Part Description Comments Revision dwg15349 Drawing Image...

Documents

Transcript of Overseeder - Land Pride · Ref. Part No. Part Description Comments Revision dwg15349 Drawing Image...