Outline

•Introduction•Different Scratch Pad Memories•Cache and Scratch Pad for embedded applications

Memories in Embedded Systems Each memory has its own advantages

For better performance memory accesses have to be fast

CPU Internal ROM

InternalSRAM

External DRAM

Efficient Utilization of Scratch-Pad Memory in Embedded Processor

Applications

What is Scratchpad memory ?

• Fast on-chip SRAM• Abbreviated as SPM• 2 types of SPM :-

Static SPM locations don’t change at runtime Dynamic SPM locations change at runtime

Objective• Find a technique for efficiently exploiting on-

chip SPM by partitioning the application’s scalar and array variables into off-chip DRAM and on-chip SPM.

• Minimize the total execution time of the application.

SPM and Cache• Similarities

Connected to the same address and data buses. Access latency of 1 processor cycle.

• Difference SPM guarantees single cycle access time while an

access to cache is subject to a miss.

Block Diagram of Embedded Processor Application

Division of Data Address Space between SRAM and DRAM

Example: Histogram Evaluation Code• Builds a histogram of 256 brightness levels for the pixels of

an N* N image –

char Brightnesslevel [512] [512]; int Hist [256]; /* Elements initialized to 0 */ …for(i = 0;i < N;i+ +)

for (j = 0;j < N;j + +) /* For each pixel (i, j) in image */ level = BrightnessLevel [i] [j]; Hist [level] = Hist [level] + 1;

Problem Description• If the code is executed on a processor

configured with a data cache of size 1Kb – performance will be degraded by conflict misses in the cache between elements of the 2 arrays Hist and BrightnessLevel.

• Solution:- Selectively map to SPM those variables that cause maximum number of conflicts in the data cache.

Partitioning Strategy• Features affecting partitioning

Scalar variables and constantsSize of arraysLife-times of array variablesAccess frequency of array variablesConflicts in loops

• Partitioning Algorithm

Features affecting partitioning• Scalar variables and constants

All scalar variables and scalar constants are mapped onto SPM.

• Size of Arrays Arrays that are larger than SRAM are mapped

onto off-chip memory.

Features affecting partitioning

• Lifetime of an Array VariableDefinition :- period between its definition and its

last use. Variables with disjoint lifetimes can be stored in

the same processor register. Arrays with different lifetimes can share the same

memory space.

Features affecting partitioning• Intersecting Life Times ILT(u)

Definition :- Number of array variables having a non-null intersection of lifetimes with u.

Indicates the number of other arrays it could possibly interact with, in cache.

So map arrays with highest ILT values into SPM, thereby eliminating a large number of potential conflicts.

Features affecting partitioning• Access frequency of Array Variables

Variable Access Count VAC(u) Definition :- Number of accesses to elements

of u during its lifetime. Interference Access Count IAC(u) Definition :- Number of accesses to other

arrays during the lifetime of u. Interference Factor IF(u) = VAC(u)*IAC(u)

Features affecting partitioning

b

c

a

3N 3N

Conflicts in Loops

for i = 0 to N-1 access a [i] access b [i] access c [2 i] access c [2 i + 1] end for

Loop Conflict GraphLCGedge weight e(u, v) = ∑p

i=1 k

i

ki ->total no. of accesses to u and v in loop i

Total no. of accesses to a and c combined : (1+2)*N = 3N =>e(a,c) = 3N ; e(b,c) = 3N ; e(a,b) = 0

Features affecting partitioning• Loop Conflict Factor

Definition :- sum of incident edge weights to node u.

LCF(u) = ∑v є LCG - {u}

e(u,v)

Higher the LCF, more conflicts are likely for an array, more desirable to map the array to the SPM.

Partitioning Strategy• Features affecting partitioning

Scalar variables and constantsSize of arraysLife-times of array variablesAccess frequency of array variablesConflicts in loops

• Partitioning Algorithm

Partitioning Algorithm• Algorithm for determining the mapping

decision of each(scalar and array) program variable to SPM or DRAM/cache.

• First assigns scalar constants and variables to SPM.

• Arrays that are larger than SPM are mapped onto DRAM.

Partitioning Algorithm• For remaining (n) arrays, generates lifetime

intervals and computes LCF and IF values.• Sorts the 2n interval points thus generated and

traverses them in increasing order.• For each array u encountered, if there is sufficient

SRAM space for u and all arrays with lifetimes intersecting the lifetime interval of u, with more critical LCF and IF nos., then maps u to SPM else to DRAM/cache.

Performance Details for Beamformer Example

Typical Applications• Dequantde-quantization routine in MPEG decoder

application• IDCTInverse Discrete Cosine Transform• SORSuccessive Over Relaxation Algorithm• MatrixMultMatrix multiplication• FFTFast Fourier Transform• DHRCDifferential Heat Release Computation

Algorithm

Performance Comparison of Configurations A, B, C and D

Conclusion• Average improvement of 31.4% over A (only

SRAM)• Average improvement of 30.0% over B (only

cache)• Average improvement of 33.1% over C

(random partitioning)

Compiler Decided Dynamic

Memory allocation for Scratch Pad Based Embedded Systems.

Cache is one of the option for Onchip Memory

CPU Internal ROM

External DRAM

Cache

Why All Embedded Systems Don't Have Cache Memory

The reasons could be • Increased On Chip Area• Increased Energy • Increased Cost • Hit Latency and Undeterministic Cache Access

A method for allocating program data to non-cached SRAM• Dynamic i.e. allocation changes at runtime• Compiler-decided transfers• Zero overhead per-memory-instruction

unlike software or hardware caching• Has no software Caching tags• Requires no run time checks• High Predictable memory access times

Static Approach

int a[100];int b[100];…while(i<100) …..a……

while(i<100)……b…...

Allocator

External DRAM

Internal SRAM

Int b[100]

Static Approach

int a[100];int b[100];…while(i<100) …..a……

while(i<100)……b…...

Allocator

External DRAM

Internal SRAM

Int a[100]

Int b[100]

Dynamic Approach

int a[100];int b[100];…while(i<100) …..a……

while(i<100)……b…...

Allocator

External DRAM

Internal SRAM

Int a[100]

Int b[100]

Dynamic Approach

int a[100];int b[100];

while(i<100)……a…...while(i<100)……b……

Allocator

External DRAM

Internal SRAM

int b[100]

int a[100]

It is similar to caching, but under compiler control

Compiler-Decided Dynamic Approach

int a[100];int b[100];…// a is in SRAM while(i<100)……a…….// Copy a out to DRAM// Copy b in to SRAM

while(i<100)……..b…..…

Decide on dynamic behavior statically

•Need to minimize costs for greater benefit •Accounts for changing program Requirements at run time•Compiler manages and decides the transfers between sram and dram

Transfer cost

Approach The method is to

• Use profiling to estimate reuse• Copy variables in to SRAM when reused

• Cost model ensures that benefit exceeds cost

• Transfers data between the On chip and Off chip memory under compiler supervision

• Compiler-known data allocation at each point in the code

Advantages • Benefits with no software translation overhead• Predictable SRAM accesses ensuring better real-

time guarantees than Hardware or Software caching

• No more data transfers than caching

Overview of Strategy

Divide the complete program into different regions For (Starting Point of each Region)< Remove Some Variables from Sram Copy Some Variables into Sram from Dram>

Some Imp Questions

What are regions ? What to bring in to SRAM ?What to evict from SRAM ?

The Problem has an exponential number of Solutions (NP Complete)

Regions • It is the code between successive program points• Coincide with changes in program behavior• New regions start at:• Start of each procedure• Before start of each loop• Before conditional statements containing loops,

procedures

What to Bring in to SRAM ?• Bring in variables that are re-used in region,

provided cost of transfer is recovered.• These transfers will reduce the memory access

time• Cost model accounts for:

• Profile estimated re-use• Benefit from reuse • Detailed Cost of transfer

• Bring in cost • Eviction cost

What to Remove from SRAM?in the future.

Need concept of time order of different code regions

The data variables that are furthest in the futureThis time can be obtained by assigning timestamps for each of the nodes

The Data-Program Relationship Graph

• The DPGR is a new data structure that helps in identification of regions and marking of time stamps

• It is essentially a program’s call graph appended with additional nodes for • Loop nodes • Variable nodes

Data-Program Relationship Graph

a b

Proc_B

1

7

3

2

Proc_A

main

5

4

6

• Defines regions

Defines Regions

Depth first search order reveals execution time.

order• “Allocation-change points” at region changes

Proc_Cloop

loop

Time Stamps• A method associates a time stamp with every

program point• The time stamp forms a total order among

themselves• The program points are reached during the

runtime in time stamp order.

Optimizations• The is no need to write back unmodified or

dead SRAM variables into DRAM• Optimize data transfer code using DMA when

it is available• Data transfer code can be placed in special

memory block copy procedures

Multiple Allocations due to Multiple Paths•

•Contents of SRAM could be different on different incoming paths to a node in DPRG

• Problem can happen in

• Loops

• Conditional execution

• Multiple calls to same procedure

Conditional join nodes

• Favor the most frequent path

• Consensus allocation is chosen assuming the incoming allocation from the most probable predecessor

Join Node

Procedure join nodes

• Few program points have multiple timestamps• The nodes with multiple timestamps are called join

nodes as they join multiple paths from main()• A strategy is used that adopts different allocation

strategies for different paths but with same code

Offsets in SRAM• SRAM can get fragmented when variables are

swapped out

• Intelligent offset mechanism required

• In this method

• Place memory variables with similar lifetimes together larger fragments when evicted together

•

Experimental Setup• Architecture: Motorola MCORE

• Memory architecture : 2 levels of memory

• SRAM size: Estimated as 25% of the total data requirement

• DRAM latency 10 cycles

• Compiler : Gcc

Results

Conclusion

The designer has to choose the right mix of Scratch pad and Cache for

performance advantages.

References• Sumesh U ,Rajeev B. Compiler Decided Dynamic Memory Allocation for Scratch Pad Based

Embedded Systems .• Alexandru N ,Preeti P, N Dutt . Efficient Use of Scratch Pads in Embedded Applications • Josh Pfrimmer, Kin F. Li, and Daler Rakhmatov Balancing Scratch Pad and Cache in Embedded Systems for Power and

Speed Performance

Questions

Thank you