outboard motors since 1968 - Parsun USA · outboard motors since 1968 Suzhou Parsun Power Machine...
1
outboard motors since 1968 Suzhou Parsun Power Machine Co., Ltd. Add:No.567 Lian Gang Rd., New&Hi-tech district, Suzhou, China 215151 Tel:+86 512 66571365 Fax:+86 512 6831 0819 Email:[email protected] www.parsun.biz *Propeller choice will vary by boat sizes and applications *B=Back control (Tiller control)、M=Manual start、S=Short shaft、L=Long shaft PARSUN 40hp four-stroke outboard features: Designed to run clean with E.F.I. system, helping to protect the environment. Lighting coil and 12V DC output allow you to run a spotlight. Over-rev limiter, overheat warning, low oil pressure warning - reliability.
Transcript of outboard motors since 1968 - Parsun USA · outboard motors since 1968 Suzhou Parsun Power Machine...
outboard motors since 1968
Suzhou Parsun Power Machine Co., Ltd.Add:No.567 Lian Gang Rd., New&Hi-tech district, Suzhou, China 215151Tel:+86 512 66571365 Fax:+86 512 6831 0819Email:[email protected]
Item F40
Engine type 4-stroke,3-cylinder,OHC
Displacement 747cc
Bore x Stroke mm(in.) 65.0x75.0(2.56x2.95)
Max. output power 29.4KW(40HP)
Full throttle range 5000~6000/rpm
Ignition system C.D.I.
Starting system Manual start / Electric
Steering system Tiller control / Remote
Max. fuel consumption 13.8L/h
Sump oil capacity 1.7L
Fuel tank capacity 24L
Trim and tilt system Manual / shallow drive
Gear shift Forward-Neutral-Reverse
Gear ratio 2.0(26/13)
Gear oil capacity 430cc
Overall width 426mm(16.8in.)
Dry weight 92.4kg(S)/94kg(L)
Transom height 381mm(15 in.)/508mm(20 in.)
Charging system 12V DC
Propeller option* 3-11 x12" or 3-11 "x13""3 1
*Propeller choice will vary by boat sizes and applications*B=Back control (Tiller control)、M=Manual start、S=Short shaft、L=Long shaft
PARSUN 40hp four-stroke outboard features: Designed to run clean with E.F.I. system, helping to protect the environment.
Lighting coil and 12V DC output allow you to run a spotlight.
Over-rev limiter, overheat warning, low oil pressure warning - reliability.
