DIESEL PARTS & SERVICE www.dieselparts.com.au

DIESEL

Diesel Parts & Service Phone: 07 3640 9400

HATZ DIESEL ENGINE RANGE

The B-Series – Flexible solution for all areas

The Hatz B series scores high marks in mobile and stationary operation with compact installation dimensions and in all

applications with a power requirement up to 8 kW due to its low weight. Also in regard to robustness and lifetime, the

series sets standards in the market. Whether on vibration plates or in the inhospitable environment of the Antarctic, the B-

series has been tried and tested a hundred thousand times in harsh surroundings.

D-Series – Revolutionary technology in single cylinder

The Hatz D series is best suited for challenging tasks. It is characterized by high power and the unique design in

particular. Thus, with 11.2 kW, the 1D90 engine is the highest performance single-cylinder diesel engine in the world. A

compensation weight on the flywheel side crank arm as well as balance weights cast in the flywheel ensure the special

quiet running of the D series. Optionally available counter-rotating balance shafts even ensure 100% 1st-order counter

balance

G-Series – The two cylinder power package

As our customers confirm, Hatz diesel engines are the most robust and durable in this market segment. It doesn't matter

where they are used; whether at very low temperatures or in a tropical climate, the Hatz 2G40 carries out its job reliably.

With regular maintenance, many thousands of hours are commonplace, using HATZ original spare parts, of course.

M-Series – Ready to use all the time

The M-Series is the mainstay among industrial diesel engines. The 2, 3 and 4-cylinder engines have been successfully

established on the market for around 30 years – and they are still regarded as unbeatable. The robust basic drive train,

notably the sturdiest crankshaft of all engines on the market, has remained unchanged since the market introduction.

Thus running times of several ten thousand hours are no problem for the M-Series engines

L-Series – Economic, operationally safe, quiet

Hatz L-Series ‘Silent Pack’ Industrial Diesel Engines are available in 2,3 and 4-cylinder configuration with German

Designed, Engineered and Factory fitted Engine encapsulation reducing radiated noise emission by 90%. The capsule

consists of sheet metal with structure-borne sound insulation that is mounted on the engine. All control and service points

are accessible without removing any covers. Hatz ‘Silent Pack’ Engines - like all other Hatz engines – offer extremely long

service life is attributed to the robust design. The cooling air circulation and high operation safety enable L-Series engines

to be operated reliably in remote areas or for applications without constant monitoring.

H-Series

Since beginning of 2014 a new engine family extends the Hatz product portfolio: The H-series. Starting with the 4H50TIC

water-cooled 4-cylinder model, Hatz is relying on common-rail technology and turbocharger with the new generation. Hatz

followed a ground-breaking downsizing approach, making the engine the most compact and lightweight in its class. The H

series does not require a diesel particulate filter ( DPF) in order to fulfil the stringent emissions regulation Stage III B in the

EU and EPA Tier 4 final in the US.

For more information on the Hatz engine range go to our web site on

www.dieslparts.com.au or contact us on 07 3640 9400

Diesel Parts & Service Phone: 07 3640 9400

Diesel Engine Continuous Horsepower Rating

Model Cyl 1500 1800 2000 2300 2600 3000 3600

1B20 1 1.9 2.3 2.6 3.0 3.4 3.8 4.2

1B30 1 2.9 3.7 4.2 4.8 5.2 5.7 6.1

1B40 1 4.4 5.3 6.0 6.9 7.6 8.3 8.8

1B50 1 4.8 5.7 6.5 7.5 8.4 9.2 9.7

1D42Z 1 4.1 5.0 5.7 6.7 7.5 8.0 8.6

1D50Z 1 4.5 5.6 6.4 7.3 8.3 9.1 9.2

1D81Z 1 6.8 8.3 9.1 10.3 11.4 12.6 -

1D90Z 1 7.9 9.2 10.5 11.7 12.8 13.9 -

2G40 2 9.5 12.0 13.2 15.2 17.1 18.6 18.6

2M41 2 20.1 24.8 - - - - -

2M41Z 2 20.1 24.8 27.5 31.1 30.6 32.2 -

3M41 3 30.6 38.1 - - - - -

3M41Z 3 30.6 38.1 42.3 47.6 46.2 48.7 -

4M41 4 41.6 50.6 - - - - -

4M41Z 4 41.6 50.6 56.3 63.6 61.9 65.0 -

Silent Pack Engines

Model Cyl 1500 1800 2000 2300 2600 3000 3600

1D42C 1 3.3 4.1 4.6 5.2 5.8 6.4 6.4

1D81C 1 6.7 8.0 8.8 10.1 10.9 12.1 -

2L41C 2 18.4 22.8 25.6 28.8 28.4 29.9 -

3L41C 3 28.0 34.3 38.2 43.9 43.1 44.9 -

4L41C 4 36.7 45.3 50.2 57.5 56.2 59.7 -

ALL RATINGS ARE CONTINUOUS HP TO ISO3046-ICXN/ICFN AT STANDARD CONDITIONS DERATING APPLIES FOR TEMPERATURE ABOVE 25 C AND ALTITUDE ABOVE 100 METERS

Diesel Parts & Service Phone: 07 3640 9400

1B20 Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….1 Bore and stroke..............................................................69 x 62 mm Displacement..........................................................................232cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity..................................................................3 litres Dry weight recoil start............................................................. 38 kg Dry weight electric start.......................................................... 45 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 2.0 1.9

1800 2.6 2.3

2000 2.9 2.6

2300 3.4 3.1

2600 3.8 3.4

3000 4.2 3.8

3600 4.6 4.2

1B30 Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….1 Bore and stroke..............................................................80 x 69 mm Displacement..........................................................................347cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity..................................................................5 litres Dry weight recoil start............................................................. 47 kg Dry weight electric start.......................................................... 50 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 3.1 2.9

1800 4.1 3.7

2000 4.6 4.2

2300 5.3 4.8

2600 5.7 5.2

3000 6.3 5.7

3600 6.8 6.1

Low Noise

Low Maintenance

Compact

1B40 Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….1 Bore and stroke..............................................................88 x 76 mm Displacement..........................................................................462cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity................................................................. 5 litres Dry weight recoil start............................................................. 60 kg Dry weight electric start.......................................................... 63 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 4.8 4.4

1800 6.0 5.3

2000 6.7 6.0

2300 7.8 6.9

2600 8.6 7.6

3000 9.2 8.3

3600 9.9 8.8

1B50 Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….1 Bore and stroke..............................................................93 x 76 mm Displacement..........................................................................517cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity..................................................................5 litres Dry weight recoil start............................................................. 61 kg Dry weight electric start.......................................................... 64 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 5.3 4.8

1800 6.4 5.7

2000 7.2 6.5

2300 8.4 7.5

2600 9.4 8.4

3000 10.3 9.2

3600 10.7 9.7

Durable and reliable

Fuel efficient

Harsh Conditions

Diesel Parts & Service Phone: 07 3640 9400

1B20V Vertical Shaft Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….1 Bore and stroke..............................................................69 x 65 mm Displacement..........................................................................243cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity..................................................................3 litres Dry weight recoil start............................................................. 39 kg Dry weight electric start.......................................................... 46 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 2.0 1.9

1800 2.6 2.3

2000 2.9 2.6

2300 3.4 3.0

2600 3.8 3.4

3000 4.2 3.8

3600 4.6 4.2

1B30V Vertical Shaft Diesel Engine Air Cooled Specifications Number of cylinders.............................................................. ………. Bore and stroke..............................................................80 x 69 mm Displacement..........................................................................347cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity.................................................................5 litres Dry weight recoil start............................................................. 50 kg Dry weight electric start.......................................................... 54 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 3.1 2.9

1800 4.1 3.7

2000 4.6 4.2

2300 5.3 4.8

2600 5.7 5.2

3000 6.3 5.7

3600 6.8 6.1

Low Noise

Low Maintenance

Compact

1B40V Vertical Shaft Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….1 Bore and stroke..............................................................88 x 76 mm Displacement..........................................................................462cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity..................................................................5 litres Dry weight electric start.......................................................... 64kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 4.8 4.4

1800 6.0 5.3

2000 6.7 6.0

2300 7.8 6.9

2600 8.6 7.6

3000 9.2 8.3

3600 9.9 8.8

1B50V Vertical Shaft Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….1 Bore and stroke..............................................................93 x 76 mm Displacement..........................................................................517cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity..................................................................5 litres Dry weight recoil start............................................................. 53 kg Dry weight electric start.......................................................... 58 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 5.3 4.8

1800 6.4 5.7

2000 7.2 6.5

2300 8.4 7.5

2600 9.4 8.4

3000 10.3 9.2

3600 10.7 9.7

Durable and reliable

Fuel efficient

Harsh Conditions

Diesel Parts & Service Phone: 07 3640 9400

1D42Z Diesel Engine Air Cooled Specifications Number of cylinders.............................................................. ………. Bore and stroke..............................................................90 x 72 mm Displacement..........................................................................445cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity..................................................................7 litres Dry weight recoil start............................................................. 80 kg Dry weight electric start.......................................................... 87 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 4.5 4.1

1800 5.6 5.0

2000 6.4 5.7

2300 7.3 6.7

2600 8.3 7.5

3000 9.0 8.0

3600 9.5 8.6

1D50Z Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….1 Bore and stroke..............................................................97 x 70 mm Displacement..........................................................................517cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity..................................................................7 litres Dry weight recoil start............................................................. 89 kg Dry weight electric start.......................................................... 95 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 5.0 4.5

1800 6.3 5.6

2000 7.1 6.4

2300 8.2 7.3

2600 9.2 8.3

3000 10.2 9.1

3600 10.2 9.2

Low Noise

Low Maintenance

Compact

1D81Z Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….1 Bore and stroke............................................................100 x 85 mm Displacement..........................................................................667cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity................................................................10 litres Dry weight recoil start...........................................................112 kg Dry weight electric start........................................................120 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 7.5 6.8

1800 9.2 8.3

2000 10.3 9.1

2300 11.4 10.3

2600 12.6 11.4

3000 13.7 12.6

3600 13.7

1D90Z Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….1 Bore and stroke............................................................104 x 85 mm Displacement..........................................................................722cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity................................................................10 litres Dry weight electric start........................................................ 112 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 8.7 7.9

1800 10.3 9.2

2000 11.4 10.5

2300 12.9 11.7

2600 14.0 12.8

3000 15.2 13.9

3600

Durable and reliable

Fuel efficient

Harsh Conditions

Diesel Parts & Service Phone: 07 3640 9400

1D90V Vertical Shaft Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….1 Bore and stroke............................................................104 x 85 mm Displacement..........................................................................722cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity.................................................................5 litres Dry weight electric start........................................................ 115 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 8.7 7.9

1800 10.3 9.2

2000 11.4 10.5

2300 12.9 11.7

2600 14.0 12.8

3000 15.2 13.9

3600

2G40 Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….2 Bore and stroke..............................................................92 x 75 mm Displacement..........................................................................997cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Fuel tank capacity..................................................................7 litres Dry weight electric start........................................................107 kg Electric start with engine protection standard Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 10.1 9.5

1800 12.6 12.0

2000 14.3 13.2

2300 16.3 15.2

2600 18.2 17.1

3000 20.0 18.6

3600 21.2 18.6

Low Noise

Low Maintenance

Compact

2M41Z Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….2 Bore and stroke..........................................................102 x 105 mm Displacement........................................................................1716cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Dry weight ............................................................................285 kg Electric start with engine protection standard Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 22.3 20.1

1800 27.5 24.8

2000 30.5 27.5

2300 34.5 31.1

2600 34.0 30.6

3000 35.8 32.2

3600

3M41Z Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….3 Bore and stroke..........................................................102 x 105 mm Displacement........................................................................2574cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Dry weight ............................................................................338 kg Electric start with engine protection standard Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 34.0 30.6

1800 42.3 38.1

2000 46.9 42.3

2300 52.9 47.6

2600 51.4 46.2

3000 54.1 48.7

3600

Durable and reliable

Fuel efficient

Harsh Conditions

Diesel Parts & Service Phone: 07 3640 9400

4M41Z Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….4 Bore and stroke..........................................................102 x 105 mm Displacement........................................................................3432cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Dry weight ........................................................................... 405 kg Electric start with engine protection standard Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 46.2 41.6

1800 56.2 50.6

2000 62.6 56.3

2300 70.7 63.6

2600 68.8 61.9

3000 72.2 65.0

3600

1D42C SILENT PACK Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….2 Bore and stroke..............................................................90 x 70 mm Displacement..........................................................................445cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Dry weight electric start.........................................................118 kg Electric start with engine protection standard Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 3.7 3.3

1800 4.5 4.1

2000 5.0 4.6

2300 5.7 5.2

2600 6.4 5.8

3000 7.1 6.4

3600 7.1 6.4

Low Noise

Low Maintenance

Compact

1D81C SILENT PACK Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….1 Bore and stroke............................................................100 x 85 mm Displacement..........................................................................667cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Dry weight ............................................................................138 kg Electric start with engine protection standard Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 7.3 6.7

1800 8.8 8.0

2000 9.7 8.8

2300 11.0 10.1

2600 12.0 10.9

3000 13.1 12.1

3600

2L41C SILENT PACK Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….2 Bore and stroke..........................................................102 x 105 mm Displacement........................................................................1716cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Dry weight ............................................................................330 kg Electric start with engine protection standard Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 20.4 18.4

1800 25.4 22.8

2000 28.4 25.6

2300 32.0 28.8

2600 31.6 28.4

3000 33.2 29.9

3600

Durable and reliable

Fuel efficient

Harsh Conditions

Diesel Parts & Service Phone: 07 3640 9400

3L41C SILENT PACK Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….3 Bore and stroke..........................................................102 x 105 mm Displacement........................................................................2574cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Dry weight ........................................................................... 393 kg Electric start with engine protection standard Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 31.1 28.0

1800 38.1 34.3

2000 42.4 38.2

2300 48.8 43.9

2600 47.9 43.1

3000 50.0 44.9

3600

4L41C SILENT PACK Diesel Engine Air Cooled Specifications Number of cylinders............................................................. ……….3 Bore and stroke..........................................................102 x 105 mm Displacement........................................................................3432cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system.................................................................Air cooled Dry weight ........................................................................... 466 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 40.8 36.7

1800 50.3 45.3

2000 55.8 50.2

2300 63.9 57.5

2600 62.4 56.2

3000 66.4 59.7

3600

Low Noise

Low Maintenance

Compact

4H50TI Diesel Engine Water-cooled Specifications Number of cylinders............................................................. ……….4 Bore and stroke..............................................................84 x 88 mm Displacement........................................................................1952cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system............................................................water cooled Dry weight ........................................................................... 234 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 55.5 45.4

1800 67.6 55.3

2000 75.2 61.5

2300 83.2 66.1

2600 84.3 67.2

2800 84.3 67.3

3000

4H50TIC Diesel Engine Water Cooled Specifications Exhaust emission after treatment....................................EGR , DOC Number of cylinders............................................................. ……….4 Bore and stroke..............................................................84 x 88 mm Displacement........................................................................1952cc Rotation...............................Counter-clockwise viewed on flywheel Cooling system............................................................Water cooled Dry weight ........................................................................... 255 kg Power Ratings: horsepower (hp)

RPM Net Intermittent Net Continuous

1500 50.4 45.4

1800 61.5 55.3

2000 68.4 61.5

2300 73.4 66.1

2600 74.6 67.2

2800 74.8 67.3

3000

Durable and reliable

Fuel efficient

Harsh Conditions

Diesel Parts & Service Phone: 07 3640 9400

ENGINE OPTIONS and ACCESSORIES 1B SERIES

Stub Shaft Options

Part number Description

01325202 ¾” tapered generator shaft

01324602 #6 “Ital” tapered shaft

01324702 ¾” parallel shaft

01324802 ¾” threaded pump shaft

01324902 20mm parallel shaft

01728503 5/8” threaded shaft

01349102 7/8” parallel shaft

01554002 Raw 26.8mm stub shaft

01580805 1” threaded pump shaft

01580704 1” parallel shaft

01580503 7/8” tapered generator shaft

01580602 25mm parallel shaft

01595302 25mm tapered shaft

01580902 Blank 31.8 DIA shaft un-machined

Adaptor Housing Options

01325100 SAE J609A (41.5mm DIA)

01320900 SAE J609b (146.1mm DIA)

ENGINE OPTIONS and ACCESSORIES 2G SERIES

Stub Shaft Options

Part number Description

01135403 40mm parallel shaft

Adaptor Housing Options

01137600 SAE5 housing

01137701 PTO Flange SAE6.5

ENGINE OPTIONS and ACCESSORIES 1D SERIES

Stub Shaft Options

Part number Description

01501800 PTO bearing side load kit

01177800 30mm parallel shaft

01175600 1” parallel shaft

01176902 1” taper shaft (genset)

01175300 Flexible coupling

Adaptor Housing Options

01404400 SAE B housing 1D41-42-50

01404300 Semi machined housing

01177402 SAE J609B (146.1mm DIA) 1D81-90

01176101 SAE5 housing

ENGINE OPTIONS and

ACCESSORIES L & M SERIES

Stub Shaft Options

Part number Description

00384801 48mm parallel shaft

01062100 PTO bearing side load kit

00793700 48mm noise proof stub shaft

00384200 Flexible coupling

Adaptor Housing Options

00837801 Heavy flywheel SAE 3/8

01535101 SAE5/5 spacer

00824800 SAE4 housing

00837701 SAE3 housing

ADDITIONAL EQUIPMENT

Part number Description

99103756 Tacho-hour meter

96500005 24 hour count down timer

99100223 Hour meter 12V

99100224 Hour meter 24V

99000007 Loss of prime with over-ride push button

01563200 35 litre fuel tank

01563400 60 litre fuel tank

01563300 100 litre fuel tank

01576500 Fuel tank console to suit 35 litre tank

01576600 Fuel tank console to suit 60 & 100 litre tank

00802002 Fuel line kit 2 meters

25900110 7mm ID supply line per meter

25900210 4.5mm ID return line per meter

25900410 3.5mm fuel line per meter

n/a Engine protection on B series

n/a 24V starting and charging system upgrade

n/a Auto-start facility via 2 wire remote start

n/a Auto-start facility via 7 day programmable time clock start

Silent Pack Units

Diesel Parts & Service Phone: 07 3640 9400

ENGINE WARRANTY POLICY

The Australian warranty on Hatz diesel engines is 24 months from the date of first sale to an "end user"

Warranty covers faulty workmanship and materials, and covers the cost of parts, labor (during normal working hours), engine removal and replacement (where necessary), travelling to the site or freight to us, at our option (freight covers overland economy road only, travelling covers up to 250 km round trip by road overland only).

This warranty applies to new engines sold in Australia as well as engines imported into Australia on new equipment (engines imported on new equipment must be less than 28 months old, from ex-factory build date).

Warranty work should be arranged through Hatz Australia Pty Ltd, one of our Authorized Service Dealers or the original equipment supplier.

Warranty applies to the complete engine including parts and accessories supplied by Hatz as original equipment.

Warranty does not cover normal wear and tear, corrosion, and operation at low load ("glazing") or overload/over speed, failures resulting from improper installation, inadequate maintenance, long-term) storage, harsh environmental conditions or the use of non-genuine replacement parts.

Parts replaced under warranty become the property of Hatz Australia Pty Ltd. Warranty does not cover loss of income or consequential damage unless provided

for under Australian Federal or State Law. In certain circumstances a pro-rata warranty may be applied where engine running

hours exceed 2,000 hours. While no warranty registration card needs to be completed to qualify for warranty,

under certain circumstances, we may require evidence to substantiate purchase date, operating hours and routine maintenance and service dates.

The above warranty is in addition to all other rights and remedies existing under Australian Federal and State Law.

Terms Prices are ex our works Brisbane. Diesel Parts and Service Pty. Ltd. (A.C.N. 009 818 848) reserves the right to change specifications, pricing or

availability without prior notice, or incurring liability of any kind. Listed retail prices are offered as a guide only, and technical details must be

confirmed where safety and performance are critical. Prices and specifications are subject to change without notice, and sales are subject to our

“Conditions of Sales”, available on request. E.& O.E.

Diesel Parts & Service

Phone: 07 3640 9400 www.dieselparts.com.au