OUR COMPANY - Reliasales Northwestreliasales.com/wp-content/uploads/2014/12/niron... · duce our...
Transcript of OUR COMPANY - Reliasales Northwestreliasales.com/wp-content/uploads/2014/12/niron... · duce our...
"The height you attain depends on the depth of your roots"
NUPIGECO S.p.A., the parent company of Nupi Americas, was founded over 40 years ago and today offers a complete range of pipes and fittings, produced using the most modern thermoplastic materials and manu-facturing processes.
These systems solve many known problems of traditional materials, and can be installed in a wide range of installations while reducing costs, avoiding waste and increasing productivity.
Thanks to their quality, these products pass the require-ments of a wide variety of national and international standards and have obtained numerous certifications and listings around the globe.
NUPIGECO S.p.A. is continuously investing in research and development programs, while upgrading production systems with sophisticated technology that guarantees products of the highest quality.
Customers can rely on the best quality materials and precise manufacture, obtained through fully automated
production systems, and continuous on-time deliveries for the success of every project.
The company employs several quality systems and is IQNET/CICISQ certified according to standards UNI EN ISO 9001 and UNI ISO 14001.
NUPI AMERICAS, Inc. was founded in 2001 in Houston, TX by NUPIGECO S.p.A. as its North American subsidiary for production and sales of its Oiltech, Smartflex, Elofit, Elopress, Elamid and SmartConduit systems. Today, NUPI AMERICAS is proud to intro-duce our Niron Polypropylene piping systems.
Since 2001 NUPI AMERICAS produced more 20 million feet of pipe, with over 4 million feet produced in 2013. With two extrusion lines currently operating, plans to increase production capacity and extensive warehouse space for maintaining a central inventory of fittings, NUPI AMERICAS is positioned to respond quickly to market needs for its unique piping systems. The pro-duction of multilayer and monolayer pipe combined with a complete range of electrofusion, heat fusion and mechanical fittings allows NUPI AMERICAS to provide cutting edge solutions to complex technological issues.
NUPI AMERICAS combines high productivity and constant high quality standards while being fully conscious of the environment. The synergy betwe-en research, production, quality control and post-sales service allowed the company to obtain many international quality certifications for various product ranges. Its market leadership is well maintained thanks to high quality products and the constant attention to customer’s needs and requirements, and by means of an effective team of people in post-sales service, and effective and precise technical assistance and the training of installers.
OUR COMPANY
The NIRON brand identifies a Random Copolymer Polypropylene (PP-RCT) pipe and fitting system produced by Nupi Americas, manufactured to ASTM F2389 and CSA B137.11 standards.
It is a piping system used for conveying sanitary hot and cold water in various types of installations such as main frames, connections to sanitary ware, iced water conduits for air conditioning systems, etc. The system can be used for hous-ing, large multi-family residential buildings, hotels, hospitals, malls, churches, schools, gymnasiums, cruise liners and merchant ships.
The NIRON system is also used in industrial installations for the conveyance of com-pressed air and several commonly used chemical substances.
Such a vast usage is possible thanks to the technological superiority of the NIRON system.
Absolute reliAbility Produced since 1982, the NIRON system has been sold in all 5 con-tinents. Over 150,000 miles of pipes and fittings have been shipped with complete customer and installer satisfaction.
The perfect connection of the parts by means of heat-fusion guarantees absolute tightness even in the harshest conditions.
Certified quAlity The NIRON system obtained the most prestigious international
quality certificates but to us quality stands for complete customer satisfaction. This is obtained exclusively through the supply of products having features that completely fulfil the application requirements.
Complete rAnge NIRON pipes and fittings - from Ø1/2 to Ø24 inches - are available
in a wide range of fittings and joining methods to solve any instal-lation problem.
low thermAl expAnsion
This is obtained thanks to the new composite piping NIRON FG and NIRON CLIMA produced with an innovative coextrusion technology.
Their inner layer is made of PP copolymer reinforced with fiberglass to reduce the linear thermal expansion up to 73%.
speed of instAllAtion Unquestionably the biggest advantage of NIRON lies in
the speed of installation.
Thanks to its light weight and versatility, installation timing can be reduced by 30 to 50%.
THE PRODUCT
* NIRON, grey pigmented PP piping with red outer coating and longitudinal grey stripes, and grey pigmented PP piping with blue outer coating and longitudinal grey stripes are trademarks of Nupi Americas, a subsidiary of Nupigeco, S.p.A.
no Corrosion or sCAling Polypropylene is a poor conductor of electricity, so the
NIRON system is cannot be affected by corrosion. Furthermore, thanks to its smooth inner surface, any type of lime incrustation is avoided.
energy sAving The low heat conductivity of polypropylene
increases energy saving by about 15% if com-pared to other metallic materials.
low noise instAllAtion The noise absorption properties and elasticity of this
material soften noise and vibrations caused by the water flow and the water hammer effect.
resistAnCe to extreme temperAtures And thermAl expAnsion
The NIRON system is tested to resist temperatures up to boiling water and freezing conditions. NIRON FG piping allows thermal expansion to be reduced to levels similar to copper piping.
AbrAsion resistAnCe The high resistance of NIRON pipes eliminates erosion problems and allows high speed water flow.
no toxiCity The NIRON system is absolutely non-toxic and complies with national and international health
standards.
30 yeAr wArrAnty The NIRON system is covered by third party liability insurance in accordance to EC standards no.
85/374 and to D.P.R no. 244 dated 24th May 1988 - Italian law.
THE PRODUCT
1 Cutting Cut the pipe perpendicularly with the appropriate pipe cutter.
Clean thoroughly before welding.
2 heAting Fix the inserts to the welder. The inserts must be suitable to
the pipe diameter.
Connect the welder to a 110V socket.
Wait for the welder to reach the operating temperature of 500°F (a LED light will switch on).
Gently push the pipe and fitting simultaneously into the inserts.
Once inserted, heat both parts for the time showed in the table below.
3 soCKet fusion Once heating is over, rapidly push the pipe into the fitting
without rotating it and apply light pressure.
Any alignment correction must be carried out immediately after insertion so as to avoid tension in the weld.
This type of molecular thermo-fusion connection guaran-tees perfect tightness even in harsh conditions.
sf welding proCedures And timing
A safe connection between NIRON pipes and fittings is obtained thanks to the simple installation procedure including socket fusion for small diameters. Other joining methods are also available.
Ø HEATINGsec
ASSEMBLINGsec
COOLING DOWN TIME min
PIPE INSERTION LENGTH in
WELDING PROCEDURES(AS PER DVS 2207 STANDARD CH. 1-6.1)
3/8” 5 4 2 0.51
- MANUAL (NSBEP socket fusion machine)
- WITH SPECIAL EQUIPMENT (STL welding machine)
½” 5 4 2 0.55¾” 7 4 3 0.591” 8 6 4 0.67
1¼” 12 6 4 0.711½” 18 6 4 0.802” 24 8 6 1.02
- WITH SPECIAL EQUIPMENT (STL welding machine)
2½” 30 8 6 1.143” 40 8 6 1.26
3½” 50 10 8 1.384” 60 10 8 1.576”
butt welding or electrofusion fittings - WITH SPECIAL EQUIPMENT8”10”
SEE OUR VIDEO INSTRUCTION ON OUR CHANNEL
INSTALLATION METHODS
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nclr pollici\NI10121.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCLR LONG RADIUS 90° ELBOW - SOCKET
FUSION NI10121
1 1 0
ND D
L1
L
H
CODE ND D L1 L H27NCLR20 1/2 => 20 mm 1.10 0.63 2.17 2.1727NCLR25 3/4 => 25 mm 1.34 0.63 2.56 2.56
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nsoff pollici\NI10123.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NSOFF COMPACT CROSSOVER F/F - SOCKET
FUSION NI10123
1 1 0
L2L1L
R
H
H1
ND
2
ND
1
CODE ND1 ND2 R L1 L2 L H1 H27NSOFF20 1/2 => 20 mm 1/2 => 20 mm 1.87 0.63 0.63 7.09 1.69 2.5227NSOFF25 3/4 => 25 mm 3/4 => 25 mm 1.79 0.67 0.67 7.17 1.61 2.60
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nsofm pollici\NI10124.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NSOFM COMPACT CROSSOVER F/M -SOCKET
FUSION NI10124
1 1 0
L1 L2L
R
H
H1
ND
2
CODE ND1 ND2 R L1 L2 L H1 H27NSOFM20 1/2 => 20 mm 1/2 => 20 mm 1.87 0.63 0.63 7.07 1.69 2.5227NSOFM25 3/4 => 25 mm 3/4 => 25 mm 1.79 0.67 0.67 7.17 1.61 2.60
ND
1
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ng pollici\NI10125.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NG 90° ELBOW - SOCKET FUSION
NI10125
1 1 0
ND
D1D
H1
H
L1
L2L
CODE ND D1 D L1 L2 L H1 H27NG20 1/2 => 20 mm 0.65 1.14 0.63 1.06 1.64 1.06 1.6327NG25 3/4 => 25 mm 0.93 1.40 0.63 1.22 1.93 1.22 1.9327NG32 1 => 32 mm 1.18 1.81 0.79 1.46 2.36 1.46 2.3627NG40 1 1/4 => 40 mm 1.42 2.21 0.87 1.69 2.80 1.69 2.7927NG50 1 1/2 => 50 mm 1.81 2.76 0.98 2.01 3.39 2.01 3.3927NG63 2 => 63 mm 2.32 3.47 1.14 2.44 4.17 2.44 4.1727NG75 2 1/2 => 75 mm 2.76 3.98 1.30 2.87 4.86 2.87 4.8627NG90 3 => 90 mm 3.37 4.45 1.46 3.25 5.47 3.25 5.4727NG110 3 1/2 => 110 mm 3.94 5.75 1.69 3.94 6.81 3.94 6.8127NG125 4 => 125 mm 4.45 6.50 1.87 4.92 8.17 4.92 8.17
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngf_NPT pollici\NI10057.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGF_NPT FEMALE THREADED 90° ELBOWS -
NPT - LEAD FREE BRASS NI10057
1 1 -1
H1 H
L1
L2
L
D
LTh. min
Thre
ad
HH
1
LTh. min
L2L
Thre
ad
L1
D
HH
1
D
Thre
adC
H
LTh. min
L2
LCH
L1
ND ND ND
L
D1 D
1
D1
CODE ND D1 D Thread L Thread min L1 L2 L H1 H CH LCH27NGF2012NPT (B) 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.54 2.11 1.08 1.81 - -27NGF2512NPT (A) 3/4 => 25 mm 0.55 1.46 1/2" NPT 0.53 0.67 1.54 2.22 1.20 1.93 - -27NGF2534NPT (A) 3/4 => 25 mm 0.73 1.65 3/4" NPT 0.55 0.67 1.54 2.22 1.20 2.03 - -27NGF3212NPT (B) 1 => 32 mm 0.55 1.65 1/2" NPT 0.53 0.71 1.81 2.64 1.42 2.24 - -27NGF3234NPT (B) 1 => 32 mm 0.73 1.65 3/4" NPT 0.55 0.71 1.81 2.64 1.42 2.24 - -27NGF321NPT (B) 1 => 32 mm 0.95 2.13 1" NPT 0.66 0.79 1.81 2.64 1.85 2.91 - -27NGF401NPT (B) 1 1/4 => 40 mm 0.95 2.24 1" NPT 0.66 0.79 2.05 3.11 1.69 2.84 - -27NGF50114NPT (C) 1 1/2 => 50 mm 1.30 2.76 1"1/4 NPT 0.68 0.98 2.60 3.98 2.01 3.39 1.81 0.5927NGF50112NPT (C) 1 1/2 => 50 mm 1.56 2.76 1"1/2 NPT 0.68 0.98 2.60 3.98 2.01 3.39 2.17 0.5927NGF63112NPT (C) 2 => 63 mm 1.56 3.47 1"1/2 NPT 0.68 1.14 3.03 4.76 2.44 4.17 2.17 0.5927NGF632NPT (C) 2 => 63 mm 1.97 3.47 2" NPT 0.70 1.14 3.23 4.96 2.44 4.17 2.55 0.79
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngm_NPT pollici\NI10058.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGM _NPT
MALE THREADED 90° ELBOWS - NPT - LEAD FREE BRASS NI10058
1 1 -1
LTh. minL2
L
ND
L1H
1H
DTh
read
D1
CODE Dn D1 D Thread L Thread min L1 L2 L H1 H27NGM2012NPT 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 2.13 2.70 1.08 1.8127NGM2512NPT 3/4 => 25 mm 0.55 1.46 1/2" NPT 0.53 0.67 2.13 2.82 1.20 1.9327NGM2534NPT 3/4 => 25 mm 0.73 1.65 3/4" NPT 0.55 0.67 2.13 2.89 1.20 2.0327NGM3212NPT 1 => 32 mm 0.55 1.65 1/2" NPT 0.53 0.71 2.40 3.23 1.42 2.2427NGM3234NPT 1 => 32 mm 0.73 1.65 3/4" NPT 0.55 0.71 2.40 3.31 1.42 2.2427NGM321NPT 1 => 32 mm 0.95 2.13 1" NPT 0.68 0.79 2.56 3.41 1.85 2.91
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngtf_NPT pollici\NI10127.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGTF_NPT
FEMALE THREADED WINGED 90°-NPT - LEAD FREE BRASS NI10127
1 1 0
D1
Thre
adD
LTh. minL2
ND
L1
L3L4
H1
H
D2
CODE ND D1 D2 D Thread L Thread min L1 L2 L3 L4 L H1 H27NGTF2038NPT 1/2 => 20 mm 0.43 0.12 1.46 3/8" NPT 0.41 0.63 1.54 2.60 2.95 2.11 1.08 1.8127NGTF2012NPT 1/2 => 20 mm 0.55 0.12 1.46 1/2" NPT 0.53 0.63 1.54 2.60 2.95 2.11 1.08 1.81
L
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngtm_NPT pollici\NI10128.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGTM_NPT
MALE THREADED WINGED 90° - NPT - LEAD FREE BRASS NI10128
1 1 0
D1
Thre
adD
LTh. minL2
ND
L1
L3L4
H1
H
L
D2
CODE ND D1 D2 D Thread LThread min L1 L2 L3 L4 L H1 H27NGTM2038NPT 1/2 => 20 mm 0.43 0.12 1.46 3/8" NPT 0.41 0.63 1.97 2.60 2.95 2.54 1.08 1.8127NGTM2012NPT 1/2 => 20 mm 0.55 0.12 1.46 1/2" NPT 0.53 0.63 2.13 2.60 2.95 2.70 1.08 1.81
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngvrf_NPT pollici\NI10129.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGVRF_NPT
MOUNTING UNIT WITH ELBOWS 1/2" x 1/2" NPT NI10129
1 1 0
L3
L1 L2L
H1
H
L4D1
H3
H2
CODE L1 L2 L3 L4 L H1 H2 H3 H D127NGVRF2012NPT 3.05 10.04 5.91 1.58 16.14 1.18 1.81 0.59 2.21 0.20
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngvf_NPT pollici\NI10130.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGVF_NPT
TEMPLATE FOR EXTERNAL BATH TAPS1/2" x 1/2" NPT3/4" x 1/2" NPT
NI10130
1 1 0
A
B
C A
B
CAA
L2L1
D1
L
H1
H
CODE L1 L2 L H1 H D1 A-A B-A B-B C-C27NGVF2012NPT 1.97 0.59 13.94 1.99 2.19 0.16 5.91 6.30 6.69 7.0927NGVF2512NPT 1.97 0.59 13.94 2.21 2.19 0.16 5.91 6.30 6.69 7.09
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngof_NPTpollici\NI10131.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGOF_NPT
FEMALE THREADED 90° ELBOW FOR TEMPLATE - NPT - LEAD FREE BRASS NI10131
1 1 0
D1
Thre
adD
L1
NDLTh. minL2
L
H1
H
CODE ND D1 D Thread L Thread min L1 L2 L H1 H27NGOF2012NPT 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.18 2.15 1.12 1.9127NGOF2512NPT 3/4 => 25 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.18 2.15 1.34 2.13
niron PiPinG SYSTEM
NIRON BLUE PP-RCT PIPE
mONOLAYER PPR PIPESDR 7.4 - 11COLOUR: bLUE WITH GREY STRIPSfROm ½” TO 24"bAR LENGTH 20 fTfOR COLD WATER
NIRON FG RED PP-RCT PIPE
mULTILAYER PIPESDR 7.4PP-RCT + fIbER GLASSCOLOUR: RED WITH GREY STRIPSfROm ½” TO 16"bAR LENGTH 20 fTfOR HOT WATER
NIRON FP CLIMA PP-RCT PIPE
mULTILAYER PIPESDR 7.4 - 9 - 11 - 17PPR + fIbER GLASSCOLOUR: GREYfROm ½” TO 6" (SDR 7.4 - 9)fROm ¾” TO 16" (SDR 11)fROm 6” TO 24" (SDR 17)bAR LENGTH 20 fT
NIRON CLIMA 11 DARK
mULTILAYER PIPEWITH UV RAY PROTECTIONSDR 11PPR + fIbER GLASS - HDPE COVERCOLOUR: GREYfROm 1” TO 16"bAR LENGTH 20 fT40011 16” x 1,43
FiTTinGS
LONG RADIUs 90° ELBOWCODE ø inchesNCLR ½” - ¾”
CROssOVER PIPECODE ø inchesNSOR ½” - ¾” - 1”
COMPACT CROssOVER F/FCODE ø inchesNSOff ½” - ¾”
COMPACT CROssOVER F/MCODE ø inchesNSOfm ½” - ¾”
90° ELBOWCODE ø inchesNG (SOCKET fUSION) from ½” to 4”NGmm (LONG SPIGOT) from 2” to 14”
FEMALE THREADED 90° ELBOWCODE ø inchesNGf from ½” x ½”NPT to 2" x 2” NPT
MALE THREADED 90° ELBOWCODE ø inchesNGm fROm ½” x ½”NPT TO 1” x 1” NPT
FEMALE THREADED BACK PLATE 90° CODE ø inchesNTER ½” x ½” NPT
FEMALE THREADED WINGED 90°CODE ø inches
NGTf ½” x ⅜” NPT ½” x ½” NPT
MALE THREADED WINGED 90°CODE ø inches
NGTm ½” x ⅜” NPT ½” x ½” NPT
MOUNTING UNIT WITH ELBOWsCODE ø inches NGVRf ½” x ½” NPT
TEMPLATE FOR ExTERNAL BATH TAPsCODE ø inches NGVf ½” x ½” NPT ¾” x ½” NPT
FEMALE THREADED 90° ELBOWFOR TEMPLATE
CODE ø inches
NGOf ½” x ⅜” NPT ¾” x ½” NPT
MALE THREADED 90° ELBOWFOR TEMPLATE
CODE ø inchesNGOm ½” x ½” NPT
sTREET 90° ELBOWCODE ø inchesNGmf from ½” to 1¼”
FEMALE THREADED sTREET 90° ELBOWCODE ø inchesNGmff ½” x ½” NPT
45° ELBOWCODE ø inchesNC45 (SOCKET fUSION) from ½” to 4”NC45mm (LONG SPIGOT) from 2” to 18”
sTREET 45° ELBOWCODE ø inchesNCmf45 from ½” to ¾”
90° TEECODE ø inchesNT (SOCKET fUSION) from ½” to 4”NTmm (LONG SPIGOT) from 2” to 18”
FEMALE THREADED TEEW/NPT LEAD FREE BRAss
CODE ø inchesNTf from ½” x ½” NPT to 1” x 1”NPT
FEMALE THREADED TEEW/NPT sTAINLEss sTEEL
CODE ø inchesNTfSS from ½” x ½” NPT to 1” x 1”NPT
MALE THREADED TEEW/NPT LEAD FREE BRAss
CODE ø inchesNTm from ½” x ½” NPT to 1” x 1”NPT
MALE THREADED TEEW/NPT sTAINLEss sTEEL
CODE ø inchesNTmSS from ½” x ½” NPT to 1” x 1”NPT
REDUCET TEECODE ø inchesNTR from ¾” x ½” x ½” to 4” x 3” x 4”
MALE sIDE FUsION REDUCED TEECODE ø inchesNTRm from 6” x 3½” to 14” x 6”
FEMALE sIDE FUsION REDUCED TEECODE ø inchesNTRf from 3” x 1¼” to 14” x 3½”
REDUCED CROssCODE ø inchesNCR from 1¼” x ½” x ½” x 1¼” to 1¼”x ¾” x ¾” x 1¼”
REDUCINGCODE ø inchesNR from ¾” x ½” to 6”x 4”
MALE CONCENTRIC REDUCERCODE ø inchesNR from 2½” x 1¼” to 8”x 6”
COUPLINGCODE ø inchesNmAN from ½” to 4”
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nter_NPT pollici\NI10126.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTER_NPT
FEMALE THREADED BACK PLATE 90° ELBOW - NPT - LEAD FREE BRASS NI10126
1 1 0
D
LTh. minL2
ND
L
L1
H1
H
CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H2 H27NTER2012NPT 1/2 => 20 mm 0.55 0.12 1.46 1/2" NPT 0.53 0.63 1.54 2.11 1.08 2.24 2.50
Thre
adD
1
D2
H2
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngom_NPT pollici\NI10132.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGOM_NPT
MALE THREADED 90° ELBOW FOR TEMPLATE - NPT - LEAD FREE BRASS NI10132
1 1 0
D1
Thre
adD
LTh. min NDL2
L
L1H
1H
CODE ND D1 D Thread L Thread min L1 L2 L H1 H27NGOM2012NPT 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.77 2.74 1.12 1.91
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngmf pollici\NI10134.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGMF STREET 90° ELBOW -SOCKET FUSION
NI10134
1 1 0
D1
H1
H
L1
L
ND
2
L2ND1
D
CODE ND1 ND2 D1 D L1 L2 L H1 H27NGMF20 1/2 => 20 mm 1/2 => 20 mm 0.52 1.18 0.63 1.14 1.54 1.12 1.7127NGMF25 3/4 => 25 mm 3/4 => 25 mm 0.65 1.38 0.63 1.30 1.79 1.38 2.0727NGMF32 1 => 32 mm 1 => 32 mm 0.95 1.69 0.79 1.34 1.97 1.87 2.7027NGMF40 1 1/4 => 40 mm 1 1/4 => 40 mm 0.95 1.69 0.49 1.34 1.97 1.87 2.70
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngmff_NPT pollici\NI10135.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGMFF_NPT
FEMALE THREADED STREET 90° ELBOW - NPT - LEAD FREE BRASS NI10135
1 1 0
NDL2
L
Thre
ad
LTh. min
H1
H
L1
D
D1
CODE ND D1 D Thread L Thread min L1 L2 L H1 H27NGMFF2012NPT 1/2 => 20 mm 0.52 1.14 1/2" NPT 0.53 0.63 1.22 1.77 1.46 2.17
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nc45 pollici\NI10136.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NC45 45° ELBOW - SOCKET FUSION
NI10136
1 1 0
NDD1
D
L1
H
L
CODE ND D1 D L1 L H1 H27NC4520 1/2 => 20 mm 0.65 1.14 0.63 1.30 0.85 1.8127NC4525 3/4 => 25 mm 0.93 1.34 0.63 1.81 0.97 2.1127NC4532 1 => 32 mm 1.18 1.65 0.79 2.21 1.14 2.5227NC4540 1 1/4 => 40 mm 1.42 2.09 0.87 2.64 1.26 2.8527NC4550 1 1/2 => 50 mm 1.87 2.60 0.98 3.29 1.56 3.5427NC4563 2 => 63 mm 2.36 3.27 1.14 4.02 1.77 4.1327NC4575 2 1/2 => 75 mm 2.76 3.90 1.30 5.10 2.56 5.7127NC4590 3 => 90 mm 3.39 4.86 1.46 5.71 2.24 5.5127NC45110 3 1/2 => 110 mm 3.94 5.75 1.69 6.79 2.76 6.6727NC45125 4 => 125 mm 4.45 6.50 1.87 7.64 3.07 7.46
H1
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncmf pollici\NI10137.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCMF STREET 45° ELBOW -SOCKET FUSION
NI10137
1 1 0
H
D
ND1
L2
L1
L
CODE ND1 ND2 D L1 L2 L H27NCMF4520 1/2 => 20 mm 1/2 => 20 mm 1.10 0.63 0.39 2.09 2.6027NCMF4525 3/4 => 25 mm 3/4 => 25 mm 1.38 0.67 0.47 2.22 2.84
ND2
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nt pollici\NI10138.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NT TEE - SOCKET FUSION
NI10138
1 1 0
HH
1
LL2
L1
D1NDD
CODE ND D1 D L1 L2 L H1 H27NT20 1/2 => 20 mm 0.71 1.30 0.63 1.06 2.13 1.06 1.7127NT25 3/4 => 25 mm 0.83 1.38 0.67 1.24 2.48 1.24 1.9327NT32 1 => 32 mm 1.18 1.81 0.79 1.46 2.91 1.46 2.3627NT40 1 1/4 => 40 mm 1.42 2.21 0.87 1.69 3.39 1.69 2.8027NT50 1 1/2 => 50 mm 1.81 2.76 0.98 2.01 4.02 2.01 3.3927NT63 2 => 63 mm 2.32 3.47 1.14 2.44 4.88 2.44 4.1727NT75 2 1/2 => 75 mm 2.76 3.98 1.30 2.87 5.75 2.87 4.8627NT90 3 => 90 mm 3.47 4.45 1.46 3.31 6.61 3.31 5.5327NT110 3 1/2 => 110 mm 3.94 5.75 1.69 3.94 7.87 3.94 6.8127NT125 4 => 125 mm 4.45 6.50 1.87 4.92 9.84 4.92 8.17
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntf_NPT pollici\NI10060.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTF_NPT FEMALE THREADED TEE - NPT - LEAD
FREE BRASS NI10060
1 1 -1
H
H1
NDD
L1
L2L
LTh.
min
Thread
H1
H
LL2
L1
Thread
NDD
LTh.
min
TYPE A TYPE B
D2
D1 D1
D2
CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTF2012NPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 1.54 2.1127NTF2512NPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 1.54 2.2227NTF2534NPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 1.54 2.2227NTF3212NPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 1.61 2.4427NTF3234NPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 1.61 2.4427NTF321NPT (B) 1 => 32 mm 0.95 2.13 2.13 1" NPT 0.66 0.79 1.85 3.74 1.54 2.60
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntf_ss NPT pollici\NI10192.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTF_SSNPT
FEMALE THREADED TEE - STAINLESS STEEL - NPT NI10192
1 1 0
H
H1
NDD
L1
L2L
LTh.
min
Thread
H1
H
LL2
L1
Thread
NDD
LTh.
min
TYPE A TYPE B
D2
D1 D1
D2
CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTF2012SSNPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 1.54 2.1127NTF2512SSNPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 1.54 2.2227NTF2534SSNPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 1.54 2.2227NTF3212SSNPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 1.61 2.4427NTF3234SSNPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 1.61 2.4427NTF321SSNPT (B) 1 => 32 mm 0.95 2.13 2.13 1" NPT 0.66 0.79 1.85 3.74 1.54 2.60
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntm_NPT pollici\NI10059.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTM_NPT
MALE THREADED TEE - NPT - LEAD FREE BRASS NI10059
1 1 -1
L1
NDD
H1 H
D1Thread
D2
LL2
LTh.
min
L1
HH
1
NDD
D1Thread
D2L2
L
TYPE A TYPE B
LTh.
min
CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTM2012NPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 2.13 2.7027NTM2512NPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 2.13 2.8227NTM2534NPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 2.21 2.8927NTM3212NPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 2.21 3.0327NTM3234NPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 2.28 3.1027NTM321NPT (B) 1 => 32 mm 0.95 2.13 1.65 1" NPT 0.68 0.79 1.87 3.74 2.50 3.35
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntm_ss NPT pollici\NI10193.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTM_SSNPT
MALE THREADED TEE - STAINLESS STEEL - NPT NI10193
1 1 0
L1
NDD
H1 H
D1Thread
D2
LL2
LTh.
min
L1
HH
1
NDD
D1Thread
D2L2
L
TYPE A TYPE B
LTh.
min
CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTM2012SSNPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 2.13 2.7027NTM2512SSNPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 2.13 2.8227NTM2534SSNPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 2.21 2.8927NTM3212SSNPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 2.21 3.0327NTM3234SSNPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 2.28 3.1027NTM321SSNPT (B) 1 => 32 mm 0.95 2.13 1.65 1" NPT 0.68 0.79 1.87 3.74 2.50 3.35
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntr pollici\NI10139.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTR REDUCED TEE SOCKET FUSION
NI10139
1 5 0
CODE ND1 ND2 ND3 D1 D2 D3 D4 D L1 L2 L3 L H1 H27NTR252025 3/4=> 25 mm 1/2=> 20 mm 3/4=> 25 mm 0.83 0.65 0.83 1.14 1.38 0.67 0.63 0.67 2.44 1.18 1.8727NTR253225 3/4=> 25 mm 1=> 32 mm 3/4=> 25 mm 0.83 0.83 0.83 1.81 1.81 0.67 0.79 0.67 2.91 1.49 2.4027NTR322032 1=> 32 mm 1/2=> 20 mm 1=> 32 mm 1.18 0.65 1.18 1.14 1.81 0.79 0.63 0.79 2.95 1.38 2.2827NTR322532 1=> 32 mm 3/4=> 25 mm 1=> 32 mm 1.18 0.83 1.18 1.38 1.81 0.79 0.67 0.79 2.95 1.38 2.2827NTR402040 1 1/4=>40 mm 1/2=> 20 mm 1 1/4=>40 mm 1.42 0.65 1.42 1.30 2.09 0.95 0.63 0.95 2.91 1.54 2.6027NTR402540 1 1/4=>40 mm 3/4=> 25 mm 1 1/4=>40 mm 1.42 0.83 1.42 1.30 2.09 0.95 0.79 0.95 2.91 1.54 2.6027NTR403240 1 1/4=>40 mm 1=> 32 mm 1 1/4=>40 mm 1.38 1.18 1.38 2.13 2.13 0.87 0.79 0.87 3.43 1.69 2.7627NTR502050 1 1/2=>50 mm 1/2=> 20 mm 1 1/2=>50 mm 1.85 0.65 1.85 1.69 2.60 1.02 0.63 1.02 3.43 1.85 3.1527NTR502550 1 1/2=>50 mm 3/4=> 25 mm 1 1/2=>50 mm 1.85 0.83 1.85 1.69 2.60 1.02 0.79 1.02 3.43 1.85 3.1527NTR503250 1 1/2=>50 mm 1=> 32 mm 1 1/2=>50 mm 1.85 1.18 1.85 1.69 2.60 1.02 0.79 1.02 3.43 1.85 3.1527NTR504050 1 1/2=>50 mm 1 1/4=>40 mm 1 1/2=>50 mm 1.69 1.42 1.69 2.60 2.60 0.91 0.87 0.91 4.02 1.97 3.2727NTR632563 2 => 63 mm 3/4=> 25 mm 2 => 63 mm 2.36 0.83 2.36 2.09 3.27 1.18 0.83 1.18 4.02 2.13 3.7827NTR633263 2 => 63 mm 1=> 32 mm 2 => 63 mm 2.36 1.18 2.36 2.09 3.27 1.18 0.83 1.18 4.02 2.13 3.7827NTR634063 2 => 63 mm 1 1/4=>40 mm 2 => 63 mm 2.36 1.42 2.36 2.09 3.27 1.18 0.91 1.18 4.02 2.13 3.7827NTR635063 2 => 63 mm 1 1/2=>50 mm 2 => 63 mm 1.97 1.81 1.97 3.15 3.15 0.98 1.02 0.98 4.80 2.52 4.09
H
D4L
L1 L3
ND
1
L2
H1N
D3D
ND2D2
D1
D3
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntr11_M pollici - SDR 11\NI10220.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTR11_M
MALE SIDE FUSION REDUCED TEESDR 11 NI10220
1 1 -1
CODE ND1 ND2 S1 S2 D1 L1 L2 L H1 H27NTR11160110M160 6 => 160 mm 3 1/2 => 110 mm 0.58 0.39 3.46 3.44 3.07 12.98 7.93 11.0827NTR11160125M160 6 => 160 mm 4 => 125 mm 0.58 0.45 5.04 3.44 3.94 13.68 8.66 11.8127NTR11200110M200 8 => 200 mm 3 1/2 => 110 mm 0.72 0.39 3.46 3.64 3.07 13.37 8.72 12.6527NTR11200125M200 8 => 200 mm 4 => 125 mm 0.72 0.45 5.04 3.64 3.94 14.07 9.45 13.3827NTR11200160M200 8 => 200 mm 6 => 160 mm 0.72 0.58 6.3 3.64 3.82 15.94 9.65 13.5827NTR11250110M250 10 => 250 mm 3 1/2 => 110 mm 0.89 0.39 3.46 4.33 3.07 14.75 9.7 14.6227NTR11250125M250 10 => 250 mm 4 => 125 mm 0.89 0.45 5.04 4.33 3.94 15.45 10.43 15.3527NTR11250160M250 10 => 250 mm 6 => 160 mm 0.89 0.58 6.3 4.33 3.82 17.32 10.63 15.5527NTR11315110M315 12 => 315 mm 3 1/2 => 110 mm 1.13 0.39 3.46 4.72 3.07 15.54 10.98 17.1827NTR11315125M315 12 => 315 mm 4 => 125 mm 1.13 0.45 5.04 4.72 3.94 16.24 11.71 17.9127NTR11315160M315 12 => 315 mm 6 => 160 mm 1.13 0.58 6.3 4.72 3.82 18.11 11.91 18.1127NTR11355110M355 14 => 355 mm 3 1/2 => 110 mm 1.27 0.39 3.46 5.12 3.07 16.33 11.77 18.7627NTR11355125M355 14 => 355 mm 4 => 125 mm 1.27 0.45 5.04 5.12 3.94 17.03 12.5 19.4927NTR11355160M355 14 => 355 mm 6 => 160 mm 1.27 0.58 6.3 5.12 3.82 18.9 12.7 19.69
S1N
D1
L1
L2
L
H
H1
S2
ND2D1
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntr_11_F pollici - SDR 11\NI10224.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTR11_FFEMALE SIDE FUSION REDUCER TEESDR 11 NI10224
1 3 -0
CODE ND1 ND2 S1 D L1 L2 L H1 H27NTR119040F90 3 => 90 mm 1 1/4 => 40 mm 0.32 2.48 2.95 0.87 8.98 3.66 5.4327NTR119050F90 3 => 90 mm 1 1/2 => 50 mm 0.32 2.76 2.95 0.98 9.26 3.86 5.6327NTR119063F90 3 => 90 mm 2 => 63 mm 0.32 3.54 2.95 1.14 10.04 4.17 5.9427NTR1111040F110 3 1/2 => 110 mm 1 1/4 => 40 mm 0.39 2.48 3.05 0.87 9.17 4.05 6.2227NTR1111050F110 3 1/2 => 110 mm 1 1/2 => 50 mm 0.39 2.76 3.05 0.98 9.45 4.25 6.4227NTR1111063F110 3 1/2 => 110 mm 2 => 63 mm 0.39 3.54 3.05 1.14 10.23 4.56 6.7327NTR1112540F125 4 => 125 mm 1 1/4 => 40 mm 0.45 2.48 3.35 0.87 9.76 4.35 6.8127NTR1112550F125 4 => 125 mm 1 1/2 => 50 mm 0.45 2.76 3.35 0.98 10.04 4.55 7.0127NTR1112563F125 4 => 125 mm 2 => 63 mm 0.45 3.54 3.35 1.14 10.82 4.86 7.3227NTR1112575F125 4 => 125 mm 2 1/2 => 75 mm 0.45 4.33 3.35 1.30 11.61 4.51 6.9727NTR1112590F125 4 => 125 mm 3 => 90 mm 0.45 4.88 3.35 1.46 12.16 4.31 6.7727NTR1116040F160 6 => 160 mm 1 1/4 => 40 mm 0.58 2.48 3.44 0.87 9.96 5.04 8.19
ND2D
L1
L2
L
H
H1
S1N
D1
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncr pollici\NI10140.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCR REDUCED CROSS
NI10140
1 1 0
ND
2D
3
ND1D
D2
L2
L3L
L1H
1H
D1
CODE ND1 ND2 D1 D2 D3 D L1 L2 L3 L H1 H27NCR402020 1 1/4 => 40 mm 1/2 => 20 mm 1.42 0.65 1.30 2.09 0.87 0.63 1.46 2.91 1.58 3.1527NCR402525 1 1/4 => 40 mm 3/4 => 25 mm 1.42 0.93 1.30 2.09 0.87 0.63 1.49 2.91 1.58 3.15
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nr pollici\NI10142.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NR REDUCING SOCKET FUSION
BUSHINGS NI10142
1 3 0
L
D
S1
L2L1
ND
2
ND
1
CODE ND1 S1 ND2 D1 D L1 L2 L27NR2520 3/4 => 25 mm 0.17 1/2 => 20 mm - 1.14 0.75 0.63 1.6127NR3225 1 => 32 mm 0.21 3/4 => 25 mm - 1.38 0.87 0.67 1.7327NR4032 1 1/4 => 40 mm 0.26 1 => 32 mm - 1.81 0.98 0.79 1.9727NR5040 1 1/2 => 50 mm 0.33 1 1/4 => 40 mm - 2.21 1.10 0.87 2.1727NR6350 2 => 63 mm 0.41 1 1/2 => 50 mm - 2.76 1.26 0.98 2.1327NR7563 2 1/2 => 75 mm 0.49 2 => 63 mm - 3.27 1.42 1.14 2.9127NR9075 3 => 90 mm 0.59 2 1/2 => 75 mm - 3.78 1.46 1.34 3.1527NR11090 3 1/2 => 110 mm 0.72 3 => 90 mm - 4.51 1.46 1.46 3.0327NR125110 4 => 125 mm 0.82 3 1/2 => 110 mm - 5.97 1.81 1.58 3.62
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nr_11MM pollici - SDR 11\NI10143.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NR_11MM
LONG SPIGOT MALE CONCENTRIC REDUCERSSDR11
NI10143
1 1 -1
L1 L2
L
ND
1
ND
2
S1 S2
CODE ND1 S1 ND2 S2 L1 L2 L27NR754011MM 2 1/2 => 75 mm 0.27 1 1/4 => 40 mm 0.15 2.56 1.89 5.6327NR755011MM 2 1/2 => 75 mm 0.27 1 1/2 => 50 mm 0.18 2.56 1.89 5.5527NR756311MM 2 1/2 => 75 mm 0.27 2 => 63 mm 0.23 2.80 2.52 5.9027NR905011MM 3 => 90 mm 0.32 1 1/2 => 50 mm 0.18 2.87 2.24 5.9827NR906311MM 3 => 90 mm 0.32 2 => 63 mm 0.23 2.80 2.24 5.9027NR907511MM 3 => 90 mm 0.32 2 1/2 => 75 mm 0.27 3.19 2.84 6.8927NR1106311MM 3 1/2 => 110 mm 0.39 2 => 63 mm 0.23 3.35 2.76 6.8927NR1107511MM 3 1/2 => 110 mm 0.39 2 1/2 => 75 mm 0.27 3.47 2.28 7.2827NR1109011MM 3 1/2 => 110 mm 0.39 3 => 90 mm 0.32 3.07 2.76 6.8927NR1257511MM 4 => 125 mm 0.45 2 1/2 => 75 mm 0.27 3.62 2.36 7.8427NR1259011MM 4 => 125 mm 0.45 3 => 90 mm 0.32 3.39 2.76 7.3227NR12511011MM 4 => 125 mm 0.45 3 1/2 => 110 mm 0.39 3.50 3.03 7.3627NR16011011MM 6 => 160 mm 0.57 3 1/2 => 110 mm 0.39 4.06 3.46 8.4627NR16012511MM 6 => 160 mm 0.57 4 => 125 mm 0.45 4.02 3.58 8.4327NR20016011MM 8 => 200 mm 0.72 6 => 160 mm 0.58 4.65 3.98 9.45
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nman pollici\NI10144.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NMAN COUPLINGS - SOCKET FUSION
NI10144
1 1 0
ND
D1 D
L1L
CODE ND D1 D L1 L27NMAN20 1/2 => 20 mm 0.71 1.14 0.67 1.3827NMAN25 3/4 => 25 mm 0.79 1.38 0.71 1.5427NMAN32 1 => 32 mm 1.18 1.81 0.79 1.6927NMAN40 1 1/4 => 40 mm 1.46 2.21 0.87 1.8927NMAN50 1 1/2 => 50 mm 1.85 2.76 0.98 2.1327NMAN63 2 => 63 mm 2.36 3.47 1.14 2.4427NMAN75 2 1/2 => 75 mm 2.76 3.98 1.30 2.8027NMAN90 3 => 90 mm 3.45 4.51 1.46 3.0327NMAN110 3 1/2 => 110 mm 4.17 5.95 1.69 3.6227NMAN125 4 => 125 mm 4.61 6.30 1.87 4.02
PRODUCT RANGE
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrfm_NPT pollici\NI10062.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRFM_NPT
MALE THREADED ADAPTERS NPT - LEAD FREE BRASS NI10062
1 1 -1
Thre
adD
LTh. minL1
L
ND
D1
Thre
ad
D
LTh. minL1
L
LCHC
H
NDD1
Thre
adC
HD
LTh. minL1
L
NDD1
TYPE A TYPE B TYPE C LCH
CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFM2012NPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 2.17 - -27NRFM2034NPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 2.48 - -27NRFM2512NPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 2.21 - -27NRFM2534NPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.69 2.44 - -27NRFM3234NPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.79 2.70 - -27NRFM321NPT (A) 1 => 32 mm 1" NPT 0.68 0.95 2.13 0.79 2.80 - -27NRFM401NPT (C) 1 1/4 => 40 mm 1" NPT 0.68 0.95 2.21 0.87 3.39 1.34 0.5127NRFM40114NPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.71 1.30 2.56 0.87 3.58 1.65 0.5927NRFM50114NPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.71 1.30 2.76 0.98 3.66 1.65 0.5927NRFM50112NPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.72 1.50 2.95 0.98 3.68 1.97 0.5927NRFM63112NPT (C) 2 => 63 mm 1"1/2 NPT 0.72 1.50 3.47 1.14 3.84 1.97 0.5927NRFM632NPT (B) 2 => 63 mm 2" NPT 0.76 1.95 3.62 1.14 4.13 2.36 0.7127NRFM752NPT (C) 2 1/2 => 75 mm 2" NPT 0.76 1.95 4.06 1.30 4.29 2.36 0.7127NRFM75212NPT (B) 2 1/2 => 75 mm 2"1/2 NPT 1.14 2.50 4.33 1.30 4.41 3.15 0.7927NRFM903NPT (B) 3 => 90 mm 3" NPT 1.20 2.95 5.08 1.46 5.08 3.54 0.9127NRFM1104NPT (B) 3 1/2 => 110 mm 4" NPT 1.30 3.92 6.30 1.69 5.83 4.53 1.1827NRFM1254NPT (C) 4 => 125 mm 4" NPT 1.30 3.92 6.30 1.87 6.00 4.53 1.18
FEMALE THREADED ADAPTERW/NPT LEAD FREE BRAss
CODE ø inchesNRff from ½” x ½” NPT to 4” x 4”NPT
FEMALE THREADED ADAPTERW/NPT sTAINLEss sTEEL
CODE ø inchesNRffSS from ½” x ½” NPT to 4” x 4”NPT
MALE THREADED ADAPTERW/NPT LEAD FREE BRAss
CODE ø inchesNRfm from ½” x ½” NPT to 4” x 4”NPT
MALE THREADED ADAPTERW/NPT sTAINLEss sTEEL
CODE ø inchesNRfmSS from ½” x ½” NPT to 4” x 4”NPT
WELDING sADDLEW/sOCKET FUsION OUTLETs
CODE ø inchesNGS from 1½” x ½” NPT to 6” x 2”NPT
MALE sIDE FUsION WELDING sADDLECODE ø inchesNGSm from 2” x 8” NPT to 6” x 12”NPT
FEMALE sIDE FUsION WELDING sADDLE W/NPT LEAD FREE BRAss
CODE ø inchesNGSf from 1¼” x ½” NPT to 3½” x 1”NPT
FEMALE sIDE FUsION WELDING sADDLE W/NPT sTAINLEss sTEEL
CODE ø inchesNGSfSS from ½” to 14”
END CAPCODE ø inchesNCC (SOCKET fUSION) from ½” to 4”NCCm (LONG SPIGOT) 6” and 8”NCCmS (SHORT SPIGOT) from 10” to 18”
sTUB FLANGECODE ø inchesNCOSA (SOCKET fUSION) from 1” to 4”NCRT (LONG SPIGOT) from 1” to 10”NCRTS (SHORT SPIGOT) from 12” to 18”
PP BACKING RING ENCAPULED AsA 150CODE ø inchesfLAACPP from 1” x 10” NPT
GAsKET LOW - sTREss EPDMCODE ø inchesGRET from 1” x 18” NPT
ElEcTroFuSion FiTTinGS
ELECTROFUsION COUPLINGCODE ø inches
NmE from ½” x 12”
ELECTROFUsION REDUCERCODE ø inchesNRDE from ½” x ¾” to 3½” x 3”
ELECTROFUsION 90° ELBOWCODE ø inchesNGEm from ½” to 3½”
ELECTROFUsION 45° ELBOWCODE ø inchesNCEm from 1” to 3½”
ELECTROFUsION TEECODE ø inchesNTCE from ½” to 6”
VAlVES
COMPLETE sTOP VALVECODE ø inchesNRA ½” - ¾”
ANGLE VALVECODE ø inchesNRAIN from ½” to 1”
ExTENDED sTOP VALVECODE ø inchesNRAPRO ½” - ¾”
CONCEALED (ExTRACTABLE) BALL VALVECODE ø inchesNRS from ½” to 1”
PPR TRUE UNION BALL VALVECODE ø inchesNRSPPVKD from ½” to 3½”
PPr coMPrESSion FiTTinG
COUPLINGCODE ø inches
NKmAN from ½” to 3½”
90° ELBOWCODE ø inches
NKG from ½” to 3½”
REDUCERCODE ø inchesNKR from ¾”x½” to 3½”x3"
90° TEECODE ø inchesNKT from ½” to 3½”
EquiPMEnT
PIPE CUTTERsCODE ø inchesSHEAR from ½” to 1"CIRCULAR from ½” to 1¼”GUILLOTINE max 4"CIRCULAR from ½” to 4"
sCRAPERsCODE ø inchesmANUALORbITAL from 2½” to 16”
ALIGNERCODE ø inchesfOR E/f fITTINGS from 2” to 10”
sOCKET FUsION TOOLsCODE ø inchesHAND HELD SOCKET fUSION TOOL WITH bUSHINGS AND CASE from ½” to 1"SOCKET fUSION TOOL WITH SUPPORT from ½” to 4"bENCHTOP SOCKET fUSION TOOL SUPPORT WITH bUSHINGS AND CASE from ½” to 4"
BUTT WELDING MACHINECODE ø inchesCOmPLETE mANUAL bUTT WELDING mACHINE WITH CASE from 1¼” to 10"
AUTOMATIC WELDING UNITFOR E/F FITTINGs
CODE ø inchesLIGHT VERSION from ½” to 6"W/bLUETOOTH from ½” to 24"
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrff_NPT pollici\NI10061.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRFF_NPT
FEMALE THREADED ADAPTERS NPT - LEAD FREE BRASS NI10061
1 1 -1
NDD1D
L1L
LTh. min
Thre
ad D
Thre
ad
NDD1
LLTh. min
LCH
L1
CH D CH
Thre
ad
NDD1
L1LTh. minL
LCHTYPE A TYPE B TYPE C
CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFF2012NPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 1.58 - -27NRFF2034NPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 1.81 - -27NRFF2512NPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 1.61 - -27NRFF2534NPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.71 1.81 - -27NRFF3234NPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.85 2.03 - -27NRFF321NPT (A) 1 => 32 mm 1" NPT 0.66 0.95 2.13 0.79 2.05 - -27NRFF401NPT (C) 1 1/4 => 40 mm 1" NPT 0.66 0.95 2.21 0.87 2.64 1.50 0.5927NRFF40114NPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.68 1.30 2.60 0.87 2.72 1.81 0.5927NRFF50114NPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.68 1.30 2.76 0.98 2.80 1.81 0.5927NRFF50112NPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.68 1.56 2.95 0.98 2.84 2.17 0.5927NRFF63112NPT (C) 2 => 63 mm 1"1/2 NPT 0.68 1.56 3.47 1.14 2.95 2.17 0.5927NRFF632NPT (B) 2 => 63 mm 2" NPT 0.70 1.97 3.62 1.14 3.15 2.56 0.7927NRFF752NPT (C) 2 1/2 =>75 mm 2" NPT 0.70 1.97 4.06 1.30 3.31 2.56 0.7927NRFF75212NPT (B) 2 1/2 =>75 mm 2"1/2 NPT 0.93 2.50 4.33 1.30 3.50 3.15 0.7927NRFF903NPT (B) 3 => 90 mm 3" NPT 1.02 2.95 5.08 1.46 3.90 3.74 0.9127NRFF1104NPT (B) 3 1/2 => 110 mm 4" NPT 1.09 3.92 6.30 1.69 4.37 4.72 1.1827NRFF1254NPT (C) 4 => 125 mm 4" NPT 1.09 3.92 6.30 1.87 4.55 4.72 1.18
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrff_ss NPT pollici\NI10184.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRFF_SSNPT
FEMALE THREADED ADAPTERS NPT - STAINLESS STEEL NI10184
1 1 0
NDD1D
L1L
LTh. min
Thre
ad D
Thre
ad
NDD1
LLTh. min
LCH
L1
CH D CH
Thre
ad
NDD1
L1LTh. minL
LCHTYPE A TYPE B TYPE C
CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFF2012SSNPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 1.58 - -27NRFF2034SSNPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 1.81 - -27NRFF2512SSNPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 1.61 - -27NRFF2534SSNPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.71 1.81 - -27NRFF3234SSNPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.85 2.03 - -27NRFF321SSNPT (A) 1 => 32 mm 1" NPT 0.66 0.95 2.13 0.79 2.05 - -27NRFF401SSNPT (C) 1 1/4 => 40 mm 1" NPT 0.66 0.95 2.21 0.87 2.64 1.50 0.5927NRFF40114SSNPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.68 1.30 2.60 0.87 2.72 1.81 0.5927NRFF50114SSNPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.68 1.30 2.76 0.98 2.80 1.81 0.5927NRFF50112SSNPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.68 1.56 2.95 0.98 2.84 2.17 0.5927NRFF63112SSNPT (C) 2 => 63 mm 1"1/2 NPT 0.68 1.56 3.47 1.14 2.95 2.17 0.5927NRFF632SSNPT (B) 2 => 63 mm 2" NPT 0.70 1.97 3.62 1.14 3.15 2.56 0.7927NRFF752SSNPT (C) 2 1/2 =>75 mm 2" NPT 0.70 1.97 4.06 1.30 3.31 2.56 0.7927NRFF75212SSNPT (B) 2 1/2 =>75 mm 2"1/2 NPT 0.93 2.50 4.33 1.30 3.50 3.15 0.7927NRFF903SSNPT (B) 3 => 90 mm 3" NPT 1.02 2.95 5.08 1.46 3.90 3.74 0.9127NRFF1104SSNPT (B) 3 1/2 => 110 mm 4" NPT 1.09 3.92 6.30 1.69 4.37 4.72 1.1827NRFF1254SSNPT (C) 4 => 125 mm 4" NPT 1.09 3.92 6.30 1.87 4.55 4.72 1.18
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrfm_ss NPT pollici\NI10186.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRFM_SSNPT
MALE THREADED ADAPTERS NPT - STAINLESS STEEL NI10186
1 1 0
Thre
adD
LTh. minL1
L
ND
D1
Thre
ad
D
LTh. minL1
L
LCH
CH
NDD1
Thre
adC
HD
LTh. minL1
L
NDD1
TYPE A TYPE B TYPE C LCH
CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFM2012SSNPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 2.17 - -27NRFM2034SSNPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 2.48 - -27NRFM2512SSNPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 2.21 - -27NRFM2534SSNPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.69 2.44 - -27NRFM3234SSNPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.79 2.70 - -27NRFM321SSNPT (A) 1 => 32 mm 1" NPT 0.68 0.95 2.13 0.79 2.80 - -27NRFM401SSNPT (C) 1 1/4 => 40 mm 1" NPT 0.68 0.95 2.21 0.87 3.39 1.34 0.5127NRFM40114SSNPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.71 1.30 2.56 0.87 3.58 1.65 0.5927NRFM50114SSNPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.71 1.30 2.76 0.98 3.66 1.65 0.5927NRFM50112SSNPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.72 1.50 2.95 0.98 3.68 1.97 0.5927NRFM63112SSNPT (C) 2 => 63 mm 1"1/2 NPT 0.72 1.50 3.47 1.14 3.84 1.97 0.5927NRFM632SSNPT (B) 2 => 63 mm 2" NPT 0.76 1.95 3.62 1.14 4.13 2.36 0.7127NRFM752SSNPT (C) 2 1/2 => 75 mm 2" NPT 0.76 1.95 4.06 1.30 4.29 2.36 0.7127NRFM75212SSNPT (B) 2 1/2 => 75 mm 2"1/2 NPT 1.14 2.50 4.33 1.30 4.41 3.15 0.7927NRFM903SSNPT (B) 3 => 90 mm 3" NPT 1.20 2.95 5.08 1.46 5.08 3.54 0.9127NRFM1104SSNPT (B) 3 1/2 => 110 mm 4" NPT 1.30 3.92 6.30 1.69 5.83 4.53 1.1827NRFM1254SSNPT (C) 4 => 125 mm 4" NPT 1.30 3.92 6.30 1.87 6.00 4.53 1.18
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngs pollici\NI10146.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGS WELDING SADDLE - SOCKET FUSION
OUTLETS NI10146
1 1 -1
L2L
D1
SN
D1
L1
D
ND
2 D
L
L1
SD1
ND1
CODE ND1 ND2 S D1 D2 D L1 L2 L27NGS5020 (A) 1 1/2 => 50 mm 1/2 => 20 mm 0.19 0.98 0.61 1.48 0.63 1.18 1.5827NGS6320 (A) 2 => 63 mm 1/2 => 20 mm 0.17 0.98 0.56 1.46 0.63 1.18 1.8327NGS7520 (A) 2 1/2 => 75 mm 1/2 => 20 mm 0.17 0.98 0.56 1.46 0.63 1.18 1.7727NGS9020 (A) 3 => 90 mm 1/2 => 20 mm 0.17 0.98 0.56 1.46 0.63 1.18 1.8427NGS11020 (A) 3 1/2 => 110 mm 1/2 => 20 mm 0.17 0.98 0.56 1.46 0.63 1.18 1.9427NGS5025 (A) 1 1/2 => 50 mm 3/4 => 25 mm 0.19 0.98 0.61 1.46 0.57 1.18 1.5627NGS6325 (A) 2 => 63 mm 3/4 => 25 mm 0.17 0.98 0.56 1.46 0.67 1.18 1.8327NGS7525 (A) 2 1/2 => 75 mm 3/4 => 25 mm 0.17 0.98 0.56 1.46 0.67 1.18 1.7727NGS9025 (A) 3 => 90 mm 3/4 => 25 mm 0.17 0.98 0.56 1.46 0.67 1.18 1.8427NGS11025 (A) 3 1/2 => 110 mm 3/4 => 25 mm 0.17 0.98 0.56 1.46 0.67 1.18 1.9327NGS6332 (A) 2 => 63 mm 1 => 32 mm 0.21 1.26 0.83 2.13 0.79 1.46 2.2427NGS7532 (A) 2 1/2 => 75 mm 1 => 32 mm 0.21 1.26 0.95 2.13 0.79 1.46 2.1327NGS9032 (A) 3 => 90 mm 1 => 32 mm 0.21 1.26 0.95 2.13 0.79 1.46 2.1827NGS11032 (A) 3 1/2 => 110 mm 1 => 32 mm 0.21 1.26 0.95 2.13 0.79 1.46 2.2727NGS16040 (B) 6 => 160 mm 1 1/4 => 40 mm 0.26 1.58 - 2.05 0.87 1.34 2.0927NGS12563 (B) 4 => 125 mm 2 => 63 mm 0.41 2.48 - 3.31 1.14 2.28 2.2827NGS16063 (B) 6 => 160 mm 2 => 63 mm 0.41 2.48 - 3.31 1.14 1.58 2.50
TYPE A TYPE B
TYPE A
TYPE B
D2
ND
2
L2
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngs_M pollici\NI10222.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGS_M MALE SIDE FUSION WELDING SADDLE
SDR11 NI10222
1 1 0
CODE ND1 ND2 S D1 D2 L1 L2 L27NGS90M160 3 => 90 mm 6 => 160 mm 0.32 4.52 3.70 2.91 4.13 4.7227NGS125M160 4 => 125 mm 6 => 160 mm 0.45 6.20 5.04 3.94 5.51 6.7727NGS63M200 2 => 63 mm 8 => 200 mm 0.23 3.20 2.52 1.50 2.36 2.5627NGS90M200 3 => 90 mm 8 => 200 mm 0.32 4.52 3.70 2.91 4.13 4.5727NGS125M200 4 => 125 mm 8 => 200 mm 0.45 6.20 5.04 3.94 5.51 6.4227NGS63M250 2 => 63 mm 10 => 250 mm 0.23 3.20 2.52 1.50 2.36 2.5227NGS90M250 3 => 90 mm 10 => 250 mm 0.32 4.52 3.70 2.91 4.13 4.4927NGS125M250 4 => 125 mm 10 => 250 mm 0.45 6.20 5.04 3.94 5.51 6.1827NGS63M315 2 => 63 mm 12 => 315 mm 0.23 3.20 2.52 1.50 2.36 2.4827NGS90M315 3 => 90 mm 12 => 315 mm 0.32 4.52 3.70 2.91 4.13 4.4127NGS125M315 4 => 125 mm 12 => 315 mm 0.45 6.20 5.04 3.94 5.51 6.0227NGS160M315 6 => 160 mm 12 => 315 mm 0.57 8.07 6.54 3.82 5.71 6.61
D1
D2
ND
1S
L1L2
L
ND2
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngsf_NPT pollici\NI10145.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGSF_NPT
FEMALE THREADED SADDLE - LEAD FREE BRASS NI10145
1 1 0
NDD
1S
LTh. min
L
D
CODE ND S Thread L Thread min D1 D2 D L1 L27NGSF4012NPT 1 1/4 = 40 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF5012NPT 1 1/2 = 50 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF6312NPT 2 => 63 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8327NGSF7512NPT 2 1/2 => 75 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.7727NGSF9012NPT 3 => 90 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8427NGSF11012NPT 3 1/2 => 110 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.9427NGSF5034NPT 1 1/2 = 50 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.71 1.63 2.0527NGSF6334NPT 2 => 63 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8327NGSF7534NPT 2 1/2 => 75 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.7727NGSF9034NPT 3 => 90 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8427NGSF11034NPT 3 1/2 => 110 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.9627NGSF631NPT 2 => 63 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.2627NGSF751NPT 2 1/2 => 75 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1427NGSF901NPT 3 => 90 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1827NGSF1101NPT 3 1/2 => 110 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.27
L1
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngsf_ss NPT pollici\NI10187.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGSF_SSNPT
FEMALE THREADED SADDLE - STAINLESS STEEL NI10187
1 1 0
NDD
1S
LTh. min
L
D
CODE ND S Thread L Thread min D1 D2 D L1 L27NGSF4012SSNPT 1 1/4 = 40 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF5012SSNPT 1 1/2 = 50 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF6312SSNPT 2 => 63 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8327NGSF7512SSNPT 2 1/2 => 75 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.7727NGSF9012SSNPT 3 => 90 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8427NGSF11012SSNPT 3 1/2 => 110 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.9427NGSF5034SSNPT 1 1/2 = 50 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.71 1.63 2.0527NGSF6334SSNPT 2 => 63 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8327NGSF7534SSNPT 2 1/2 => 75 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.7727NGSF9034SSNPT 3 => 90 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8427NGSF11034SSNPT 3 1/2 => 110 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.9627NGSF631SSNPT 2 => 63 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.2627NGSF751SSNPT 2 1/2 => 75 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1427NGSF901SSNPT 3 => 90 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1827NGSF1101SSNPT 3 1/2 => 110 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.27
L1
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncc pollici\NI10149.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCC END CAP SOCKET FUSION
NI10149
1 1 0
ND
D
L1L
S
CODE ND S D L1 L27NCC20 1/2 => 20 mm 0.13 1.18 0.67 1.1427NCC25 3/4 => 25 mm 0.17 1.40 0.71 1.3427NCC32 1 => 32 mm 0.21 1.77 0.79 1.5827NCC40 1 1/4 => 40 mm 0.26 2.13 0.87 1.6527NCC50 1 1/2 => 50 mm 0.33 2.60 1.00 1.8927NCC63 2 => 63 mm 0.41 3.27 1.34 2.2127NCC75 2 1/2 => 75 mm 0.49 3.90 1.69 2.4027NCC90 3 => 90 mm 0.59 4.69 1.34 2.6827NCC110 3 1/2 => 110 mm 0.72 5.79 1.46 3.1127NCC125 4 => 125 mm 0.82 6.38 1.58 3.43
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncosa pollici\NI10158.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCOSA STUB FLANGE SOCKET FUSION
NI10158
1 2 0
ND
D2
D1
D
L1
L
CODE ND D1 D2 D L1 L27NCOSA32 1 => 32 mm 1.10 1.60 2.01 0.71 1.0227NCOSA40 1 1/4 => 40 mm 1.42 1.95 2.52 0.81 1.1827NCOSA50 1 1/2 => 50 mm 1.83 2.40 2.88 0.93 1.3427NCOSA63 2 => 63 mm 2.22 2.99 3.56 1.08 1.5027NCOSA75 2 1/2 => 75 mm 2.80 3.54 4.11 1.18 1.65
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncosa pollici\NI10158.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCOSA STUB FLANGE SOCKET FUSION
NI10158
2 2 0
LL1
D2
NDD
1
D
CODE ND D1 D2 D L1 L27NCOSA90 3 => 90 mm 2.90 4.21 5.12 1.46 1.8127NCOSA110 3 1/2 => 110 mm 3.54 5.16 5.91 1.69 2.2427NCOSA125 4 => 125 mm 4.33 5.75 6.38 1.87 2.46
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Flaacpp pollici\NI10199.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.FLAACPP PP BACKING RING ENCAPULATED
ANSI 150 NI10199
1 1 0
T
hole
s
PC
DIDOD
CODE ND (PP) OD ID PCD T holes N° holes00FLAACPP321 1 => 32 mm 4.25 1.65 3.13 0.63 0.63 400FLAACPP40114 1 1/4 => 40 mm 4.61 1.89 3.50 0.63 0.63 400FLAACPP50112 1 1/2 => 50 mm 5.00 2.48 3.87 0.71 0.63 400FLAACPP632 2 => 63 mm 6.02 3.15 4.76 0.71 0.75 400FLAACPP75212 2 1/2 => 75 mm 7.01 3.43 5.51 0.71 0.75 400FLAACPP903 3 => 90 mm 7.48 4.33 5.98 0.79 0.75 400FLAACPP110312 3 1/2 => 110 mm 9.06 5.04 7.48 0.79 0.75 800FLAACPP1254 4 => 125 mm 10.00 5.12 8.50 0.79 0.75 800FLAACPP1606 6 => 160 mm 11.22 7.09 9.49 1.02 0.87 800FLAACPP2008 8 => 200 mm 13.50 9.25 11.73 1.02 0.87 800FLAACPP25010 10 => 250 mm 15.98 11.22 14.25 1.18 1.00 12
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nme pollici\NI10164.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NME ELECTROFUSION COUPLINGS
NI10164
1 1 0
CODE ND L1 L H D27NME20 1/2 => 20 mm 1.34 2.76 2.05 1.3027NME25 3/4 => 25 mm 1.34 2.76 2.28 1.5227NME32 1 => 32 mm 1.34 2.76 2.56 1.7927NME40 1 1/4 => 40 mm 1.61 3.35 2.95 2.1727NME50 1 1/2 => 50 mm 1.67 3.47 3.43 2.6827NME63 2 => 63 mm 1.67 3.86 3.94 3.2327NME75 2 1/2 => 75 mm 2.40 4.92 4.49 3.8627NME90 3 => 90 mm 2.84 5.75 5.12 4.4527NME110 3 1/2 => 110 mm 3.03 6.10 5.67 5.3527NME125 4 => 125 mm 3.23 6.54 6.58 6.1627NME160 6 => 160 mm 3.41 6.89 7.93 7.4827NME200 8 => 200 mm 3.60 7.28 9.57 9.1327NME250 10 => 250 mm 4.17 8.35 11.81 11.6527NME315 12 => 315 mm 4.72 9.45 14.69 14.67
ND
L1
L
H
D
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrde pollici\NI10201.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRDE ELECTROFUSION REDUCER
NI10201
2 2 0
CODE ND1 ND2 D L1 L2 L3 L H27NRDE4032 1 1/4=> 40 mm 1 => 32 mm 2.17 1.85 1.65 - 3.74 2.9127NRDE5032 1 1/2 => 50 mm 1 => 32 mm 2.52 1.95 1.63 - 3.94 3.3527NRDE5040 1 1/2 => 50 mm 1 1/4=> 40 mm 2.52 1.95 1.87 - 4.06 3.3527NRDE6332 2 => 63 mm 1 => 32 mm 3.21 2.19 1.65 - 4.65 3.9027NRDE6340 2 => 63 mm 1 1/4=> 40 mm 3.21 2.17 1.77 - 4.65 3.9027NRDE6350 2 => 63 mm 1 1/2 => 50 mm 3.21 2.19 1.97 - 4.65 3.9027NRDE7563 2 1/2 => 75 mm 2 => 63 mm 3.82 2.36 2.24 - 4.92 4.4927NRDE9063 3 => 90 mm 2 => 63 mm 4.53 2.68 2.44 - 5.91 5.1627NRDE1163 3 1/2 => 110 mm 2 => 63 mm 5.31 2.85 2.48 - 6.30 5.9327NRDE1190 3 1/2 => 110 mm 3 => 90 mm 5.31 2.87 2.70 - 6.22 5.93
ND
1
ND
2
D
H
L1 L2
L
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngem pollici\NI10161.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGEM ELECTROFUSION 90° ELBOW
NI10161
1 1 -1
CODE ND L1 L2 L H27NGEM20 (A) 1/2 => 20 mm 1.34 1.99 2.05 3.7627NGEM25 (A) 3/4 => 25 mm 1.46 2.13 2.24 4.0227NGEM32 (B) 1 => 32 mm 1.34 2.26 2.52 3.1527NGEM40 (B) 1 1/4 => 40 mm 1.61 2.56 2.87 3.6027NGEM50 (B) 1 1/2 => 50 mm 1.89 3.03 3.31 4.3127NGEM63 (B) 2 => 63 mm 2.09 3.46 3.94 5.0827NGEM75 (B) 2 1/2 => 75 mm 2.28 3.82 4.33 5.5927NGEM90 (B) 3 => 90 mm 3.07 4.69 5.24 6.9327NGEM110 (B) 3 1/2 => 110 mm 3.27 5.67 6.46 8.43
TYPE A TYPE B
TYPE A
TYPE B
L1L2
DN
L
H ND
L1L2
L
H
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncem pollici\NI10162.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCEM ELECTROFUSION 45° ELBOW
NI10162
1 1 -1
CODE ND L1 L2 L H27NCEM32 1 => 32 mm 1.41 1.83 2.54 3.7027NCEM40 1 1/4 => 40 mm 1.61 2.11 2.95 4.2927NCEM50 1 1/2 => 50 mm 1.89 2.46 3.27 5.0427NCEM63 2 => 63 mm 2.09 2.68 3.94 5.7927NCEM75 2 1/2 => 75 mm 2.36 3.19 4.45 6.6527NCEM90 3 => 90 mm 2.76 3.90 5.28 8.1927NCEM110 3 1/2 => 110 mm 3.27 4.49 6.36 9.49
ND
L1L2
L
H
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntce pollici\NI10200.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTCE SINGLE-WIRE ELECTROFUSION
EQUAL TEE WITH SPIGOT END NI10200
1 1 0
ND
1
L2
LL1
SND2
HH
1
L3
CODE ND1 ND2 S D L1 L2 L3 L H1 H27NTCE020 1/2 => 20 mm 1/2 => 20 mm 0.12 1.26 1.48 1.81 2.05 1.77 2.62 3.2727NTCE025 3/4 => 25 mm 3/4 => 25 mm 0.12 1.46 1.48 1.81 2.24 1.97 2.70 3.4327NTCE032 1 => 32 mm 1 => 32 mm 0.12 1.73 1.48 1.85 2.52 2.17 2.95 3.8027NTCE040 1 1/4 => 40 mm 1 1/4 => 40 mm 0.15 2.13 1.73 2.13 2.91 2.62 3.31 4.3727NTCE050 1 1/2 => 50 mm 1 1/2 => 50 mm 0.18 2.56 1.83 2.40 3.35 3.01 3.94 5.2627NTCE063 2 => 63 mm 2 => 63 mm 0.23 3.15 2.24 2.68 3.90 3.54 4.53 6.1427NTCE075 2 1/2 => 75 mm 2 1/2 => 75 mm 0.27 3.74 2.28 2.83 4.41 3.86 5.12 7.0127NTCE110 3 1/2 => 110 mm 3 1/2 => 110 mm 0.39 5.47 3.27 3.48 6.16 5.67 6.97 9.7227NTCE160 6 => 160 mm 6 => 160 mm 0.57 7.48 3.42 4.13 7.93 5.94 8.19 11.93
D
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nra pollici\NI10155.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRA COMPLETE STOP VALVE WITH LEAD
FREE BRASS NI10155
1 1 0
H1
H
D1
L1L
ND
CODE ND D1 L1 L H1 H27NRA20 1/2 => 20 mm 0.65 0.63 3.35 2.78 3.3527NRA25 3/4 => 25 mm 0.93 0.79 3.94 3.11 3.82
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrain pollici\NI10157.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRAIN ANGLE VALVE WITH LEAD FREE
BRASS NI10157
1 1 0
HH1
D1ND
L1L2
CODE ND D1 L1 L2 L H1 H27NRAIN20 1/2 => 20 mm 0.65 0.63 3.07 4.57 3.07 4.3327NRAIN25 3/4 => 25 mm 0.93 0.67 3.66 5.32 3.62 4.8027NRAIN32 1 => 32 mm 1.10 0.79 4.53 6.50 4.49 5.91
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrapro pollici\NI10156.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRAPRO EXTENDED STOP VALVE WITH LEAD
FREE BRASS NI10156
1 1 0
H
H1
ND
D1
L1L
CODE ND D1 L1 L H1 H27NRAPRO20 1/2 => 20 mm 0.65 0.63 3.35 3.70 4.2927NRAPRO25 3/4 => 25 mm 0.93 0.79 3.94 3.70 4.41
* THE SHAPE OF THE HANDLE MAY BE CHANGED
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrs pollici\NI10153.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRS CONCEALED (EXTRACTABLE) BALL
VALVE WITH LEAD FREE BRASS NI10153
1 1 0
ND
LL1
H
CODE ND D1 L1 L H1 H27NRS20 1/2 => 20 mm 0.59 0.63 3.96 2.87 3.6227NRS25 3/4 => 25 mm 0.59 0.67 3.96 2.87 3.6227NRS32 1 => 32 mm 0.79 0.79 4.76 3.03 3.86
D1
H1
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrsppvkd pollici\NI10212.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRSPPVKDPPR TRUE UNION BALL VALVE
NI10212
1 1 0
CODE ND L2 L1 L D H1 H2 H27NRSPPVKD020 1/2 => 20 mm 2.64 2.87 4.02 2.13 2.13 1.14 3.2727NRSPPVKD025 3/4 => 25 mm 3.35 3.23 4.49 2.56 2.56 1.36 3.9227NRSPPVKD032 1 => 32 mm 3.35 3.54 4.96 2.87 2.74 1.54 4.2727NRSPPVKD040 1 1/4 => 40 mm 4.25 3.94 5.55 3.39 3.25 1.81 5.0627NRSPPVKD050 1 1/2 => 50 mm 4.25 4.61 6.46 3.86 3.50 2.05 5.5527NRSPPVKD063 2 => 63 mm 5.28 5.67 7.83 4.81 4.25 2.44 6.6927NRSPPVKD075 2 1/2 => 75 mm 8.86 6.02 8.39 6.38 6.46 3.43 9.8827NRSPPVKD090 3 => 90 mm 12.87 6.81 9.41 7.95 6.97 4.13 11.1027NRSPPVKD110 3 1/2 => 110 mm 15.16 7.83 10.55 9.29 7.68 5.08 12.76
L2
D
H1
H2
H
L
L1
ND
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkman pollici\NI10214.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NKMAN COUPLER - COMPRESSION FITTINGS
NI10214
1 1 -1
ND
L
L1
H
CODE ND L1 L H03NKMAN20 1/2 => 20 mm 2.07 4.69 1.7703NKMAN25 3/4 => 25 mm 2.15 4.69 2.0903NKMAN32 1 => 32 mm 2.46 5.43 2.5403NKMAN40 1 1/4 => 40 mm 3.15 6.59 3.2903NKMAN50 1 1/2 => 50 mm 3.54 7.24 3.7803NKMAN63 2 => 63 mm 4.33 8.84 4.4503NKMAN75 2 1/2 => 75 mm 4.76 9.69 5.2003NKMAN90 3 => 90 mm 5.67 11.73 5.9303NKMAN110 3 1/2 => 110 mm 6.91 14.33 6.97
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkg pollici\NI10216.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NKG 90° ELBOW - COMPRESSION FITTINGS
NI10216
1 1 -1
ND
L1
H1
H
L
CODE ND L1 L H1 H03NKG20 1/2 => 20 mm 2.07 3.68 2.72 3.6803NKG25 3/4 => 25 mm 2.15 3.94 2.87 3.9403NKG32 1 => 32 mm 2.46 4.72 3.39 4.7203NKG40 1 1/4 => 40 mm 3.15 5.98 4.29 5.9803NKG50 1 1/2 => 50 mm 3.54 6.61 4.80 6.6103NKG63 2 => 63 mm 4.33 7.91 5.79 7.9103NKG75 2 1/2 => 75 mm 4.76 9.29 6.69 9.2903NKG90 3 => 90 mm 5.67 11.10 8.15 11.1003NKG110 3 1/2 => 110 mm 6.91 13.05 9.57 13.05
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkr pollici\NI10215.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NKR REDUCER - COMPRESSION FITTINGS
NI10215
1 1 -1
L
L1 L2
ND
1
ND
2
H
CODE ND1 ND2 L1 L2 L H03NKR2520 3/4 => 25 mm 1/2 => 20 mm 2.15 2.07 4.37 2.0903NKR3220 1 => 32 mm 1/2 => 20 mm 62,5 2.07 5.06 2.5403NKR3225 1 => 32 mm 3/4 => 25 mm 62,5 2.15 5.08 2.5403NKR4025 1 1/4 => 40 mm 3/4 => 25 mm 3.15 2.15 5.71 3.2903NKR4032 1 1/4 => 40 mm 1 => 32 mm 3.15 2.46 5.71 3.2903NKR5032 1 1/2 => 50 mm 1 => 32 mm 3.54 2.46 6.42 3.7803NKR5040 1 1/2 => 50 mm 1 1/4 => 40 mm 3.54 3.15 6.30 3.7803NKR6332 2 => 63 mm 1 => 32 mm 4.33 2.46 7.36 4.4503NKR6340 2 => 63 mm 1 1/4 => 40 mm 4.33 3.15 8.03 4.4503NKR6350 2 => 63 mm 1 1/2 => 50 mm 4.33 3.54 8.98 4.4503NKR7550 2 1/2 => 75 mm 1 1/2 => 50 mm 4.76 3.54 9.00 5.2003NKR7563 2 1/2 => 75 mm 2 => 63 mm 4.76 4.33 9.17 5.2003NKR9063 3 => 90 mm 2 => 63 mm 5.67 4.33 10.02 5.9803NKR9075 3 => 90 mm 2 1/2 => 75 mm 5.67 4.76 11.44 5.9803NKR11090 3 1/2 => 110 mm 3 => 90 mm 6.91 5.67 13.01 7.13
www.nupiamericas.com - [email protected]
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkt pollici\NI10217.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NKT 90° TEE - COMPRESSION FITTINGS
NI10217
1 1 -1
ND
L
L2
H1
H
L1
CODE ND L1 L2 L H1 H03NKT20 1/2 => 20 mm 2.07 2.68 5.35 2.68 3.6003NKT25 3/4 => 25 mm 2.15 2.87 5.75 2.87 3.8603NKT32 1 => 32 mm 2.46 3.43 6.85 3.43 4.6503NKT40 1 1/4 => 40 mm 3.15 4.25 8.50 4.25 5.9803NKT50 1 1/2 => 50 mm 3.54 4.80 9.61 4.80 6.8903NKT63 2 => 63 mm 4.33 5.71 11.42 5.71 7.7603NKT75 2 1/2 => 75 mm 4.76 6.61 13.23 6.61 9.2103NKT90 3 => 90 mm 5.67 8.15 16.30 8.15 11.0803NKT110 3 1/2 => 110 mm 6.91 9.61 19.21 9.61 13.09
PRODUCT RANGE
Nupi Americas, Inc.
1511 Superior Way,Houston - TX 77039 - U.S.A.ph. 281 590 4471fax 281 590 [email protected]
www.nupiamericas.com