Other Safety Matting Options PROTECT YOUR...

2
NZ Compliant Low Maintenance Non-slip Surface All Weather Surface Choice of Quality Systems Options to Suit Your Budget Equal Access Proudly NZ Designed and Made PLAYGROUND SAFETY SURFACING Other Safety Matting Options Tiles Manufactured in one metre squares 15-40mm in thickness. Easily self installed to keep costs to a minimum. Suitable for laying over concrete, asphalt or a stable prepared base. Impact Matting Designed to provides a permanent cost effective solution. Eliminates scuff zone maintenance in bark play areas. Suitable for swings and slides. Ramp Matting Provides traction for foot traffic and wheelchairs in wet or damp areas and inclines. Ideal for decks, steps and pathways. Modular Long Run Supplied ex-factory in rolls precut to your individual specifications. This product can be easily self-installed if required. An anti-stumble edge ramping is available on request. 22 Poutini Street Wanganui, New Zealand Telephone (06) 343 8570 Fax (06) 343 7136 Email: [email protected] www.burgessmatting.co.nz 0800 80 85 70 www.burgessmatting.co.nz PROTECT YOUR CHILDREN

Transcript of Other Safety Matting Options PROTECT YOUR...

Page 1: Other Safety Matting Options PROTECT YOUR CHILDRENburgessmatting.co.nz/.../2012/05/Playground_Safety... · PLAYGROUND SAFETY SURFACING Other Safety Matting Options Tiles Manufactured

NZ Compliant

Low Maintenance

Non-slip Surface

All Weather Surface

Choice of Quality Systems

Options to Suit Your Budget

Equal Access

Proudly NZ Designed and Made

PLAYGROUND SAFETY

SURFACING

Other Safety Matting Options

Tiles

Manufactured in one metre squares 15-40mm in thickness.

Easily self installed to keep costs to a minimum.

Suitable for laying over concrete, asphalt or a stable prepared base.

Impact Matting

Designed to provides a permanent cost effective solution.

Eliminates scuff zone maintenance in bark play areas.

Suitable for swings and slides.

Ramp Matting

Provides traction for foot traffic and wheelchairs in wet or damp areas

and inclines. Ideal for decks, steps and pathways.

Modular Long Run

Supplied ex-factory in rolls precut to your individual specifications.

This product can be easily self-installed if required.

An anti-stumble edge ramping is available on request.

22 Poutini Street

Wanganui, New Zealand

Telephone (06) 343 8570

Fax (06) 343 7136

Email: [email protected]

www.burgessmatting.co.nz

0800 80 85 70www.burgessmatting.co.nz

P R O T E C T Y O U R C H I L D R E N

Page 2: Other Safety Matting Options PROTECT YOUR CHILDRENburgessmatting.co.nz/.../2012/05/Playground_Safety... · PLAYGROUND SAFETY SURFACING Other Safety Matting Options Tiles Manufactured

S a f e b o n d S y s t e m P e r m a b o n d S y s t e m

Permabond Features:

• Topcoat made from 100% synthetic EPDM rubber.

• Surface texture resembles small ball bearing size chips.

• Porous surface allows fast, efficient drainage of large

volumes of water.

• Standard colours red and red/ black mix.

• 16 permanent vibrant colours available.

• Use a Permabond surface where child safety, reduced maintenance,

drainage, appearance and colour are the most important factors.

Safebond Features:

• Hard wearing 100% recycled rubber surface.

• Surface texture resembles rice grains.

• Allows surface contaminates to be easily removed.

• Available colours: red, green, black, grey and sand.

• Use a Safebond surface where child safety, reduced

maintenance and budget are the most important factors.

Wet-Pour Systems

Wet-Pour Systems are virtually seamless, non-slip rubber surfaces installed on-site by our own experienced technicians.

The matting is installed standard at a minimum 50mm thickness. The Burgess Matting systems are high quality products both

in effectiveness, appearance and durability to provide the ultimate solution for safety in the playground.

25mmHitting the ground

50mmNo bottoming out

A thicker impact absorption area is good reason to purchase the Burgess system