osmafin Aquablock Plus - christeyns€¦ · Mode of action Application Waterproofing of protective...

2
But who is protecting them? Premium impregnating agent with water-, dirt- and oil repellent effect Already active at drying temperatures > 60°C Enhanced environmental profile thanks to C6 chemistry Low temperature waterproofing agent for personal protective textiles OSMAFIN AQUABLOCK PLUS

Transcript of osmafin Aquablock Plus - christeyns€¦ · Mode of action Application Waterproofing of protective...

Page 1: osmafin Aquablock Plus - christeyns€¦ · Mode of action Application Waterproofing of protective clothing (industry, rescue and fire brigades), surgical textiles (microfibres ...

But who is protecting them?

Premium impregnating agent with water-, dirt- and oil repellent effect

Already active at drying temperatures > 60°C

Enhanced environmental profile thanks to C6 chemistry

Low temperature waterproofing agent for personal protective textiles

OSMAFIN AQUABLOCK PLUS

Page 2: osmafin Aquablock Plus - christeyns€¦ · Mode of action Application Waterproofing of protective clothing (industry, rescue and fire brigades), surgical textiles (microfibres ...

www.christeyns.com

Mode of action

Application

Waterproofing of protective clothing (industry, rescue and fire brigades), surgical textiles (microfibres), rain and sports wearRefreshment of water- and stain repellent properties during each wash cycle

PF-O

smafi

n Aq

uabl

ock

Plus

- 20

1105

09-E

NOSMAFIN AQUABLOCK PLUS

Packaging : cans (20 KG), drums (190 KG) and containers (900 KG) Temperature : storage >0°C, dosage > 5°C Dosage : Dose 30-40 ml/kg of dry fabrics in the last rinse cycle for 5-15 min

Packaging & use

Water- and stain repellent textiles are treated with fluorocarbons, chemically fixed onto the textiles

1

Use of the textile, washing, and drying at room tem-perature reduce the impregnating effect

• Good spray ratings• Good water column

values

• Bad spray ratings• Bad water column

values

Repellent action needs to be refreshed

2 With conventional impregnating agents, textiles need to be heated to a minimum of 120°C to get full performance

Energy consumption

Textile damage

3 With OSMAFIN AQUABLOCK PLUS, the fluorocarbon polymers are already active at drying temperatures of minimum 60°C

4 OSMAFIN AQUABLOCK PLUS : C6 chemistry

Self organising dendrimere with a complex crystallisation process

The FC chains will be forced to move to the surface higher order of FC chains

Free of perfluorated deter-gents (PFOS and PFOA)Benefits

Excellent water and stain repellent effect

Low drying temperature (>60°) energy savings

Added value towards demanding end-user

Low textile damage

Improved abrasion resistance

Enhanced wash proof properties

Use of Dendrimeres in combination with shorter chained C6 fluorocarbon resin gives a stronger repel-lent effect than conventional C8 chain fluorocarbon

FC chains

Textile

Dendrimeres