OS2 - s3-eu-central-1.amazonaws.com
Transcript of OS2 - s3-eu-central-1.amazonaws.com
OS2 Italian elegance for doors and windows compasso d’oro award
OS2 family systems are characterised by an elegant solution for the relationship between the transparency of the glass and the lightness of solid precious metal frames; for efficiency, versatility and beauty of doors and windows; for the merging of technological innovation and detailed craftsmanship. Awarded the Compasso d’Oro 2018, OS2 represents the synthesis of the mature experience acquired by Secco Sistemi during the course of decades of research and business vocation directed towards continuously exceeding its own goals.
2 3
OS2 65 OS2 LB OS2 40OS2 BVOS2 75 OS2 AS
Efficient and versatile, the thermally broken OS2 65has a depth of 65 mm to accommodate glazing up to 40 mm; with visible sections ranging from 27 to 62 mm. OS2 65 is a system to design the desired door or window in detail with minimal sections and high performance features of the OS2 family.
The thermally brokenOS2 LB system integrates the free opening in the windows and doors of the OS2 family, with the same high-performance and minute profiles. The sashes up to 100 x 290 cm rotate and slide with reduced dimensions on concealed hinges and rails; the profiles have constant sections along the entire perimeter of the frame.
OS2 40 is the system with tubular profiles of the OS2 family. The highest quality focuses on a system reduced to the essentials, with a depth of 40 mm and visible sections ranging from 12 to 62 mm. Ideal for implementing lightweight frames for interior design projects, with glazing partitions that reproduce the same design of the windows and doors.
The OS2 thermally broken system in the OS2 BV variant, with the same bevelled corner moulding on the outside of the sash and in the glazing bead. Perfect symmetry between inside and outside, with the glass aligned with the section of the frame and the performance characteristics of the OS2 family.
OS2 75 is the thermally broken system belonging to the OS2 family, winner of the Compasso d’Oro 2018. The profiles, with visible sections ranging from 27 to 62 mm, house glazing up to 50 mm and allow for many variants in differentiating façade arrangements and opening types, even with a tilt and turn.
The OS2 AS thermally broken system allows to produce lift-and-slide doors, with a floor-level threshold, in perfect continuity with OS2 75, 65 and LB windows and doors. A complete set of special profiles that correspond to the features of the OS2 family.
p 26 p 90p 16 p 84 p 46 p 102 p 56 p 108p 06 p 78 p 36 p 96
6
OS2 75
With its solid and precious lightness, OS2 75 makes the merging of technological innovation and detailed craftsmanship perfect. Offering a vast variety of different kinds of openings and an infinite possibility of façade arrangements, minimal sections and high performance characteristics, materials and impeccable finishings, OS2 75 received the Compasso d’Oro in 2018, the oldest and most authoritative worldwide recognition in the field of design.
8
OS2 75
9
12
3
4
5
8
9
7
6
1
2
3
4
5
6
7
8 9
you can freely compile over 40 profiles, with visible sections ranging from 27 to 62 mm, depths ranging from 70 to 84 mm, glazing up to 50 mm, also with tilt and turn opening
wind resistance - test pressure 5
wind resistance - frame bending C
water tightness 9A
acoustic performance (with Rw per IGU 42dB) 45 dB
thermal transmittance (with Ug glass 0,7 W/m2K) 1,04 W/m2K
air permeability 4
maximum achievable performance
glazing bead
glazing slot up to 50 mm
internal and external overlap
hardware groove
internal rebate gasket
external rebate gasket
central flipper gasket
composite structural thermal breakpolyurethanepolyamide
100 20 30 40 50OS2 75 external view blackened stainless steel OS2 75 internal view blackened stainless steel
12 13
door and windowpivoting opening
technical drawings p 78
OS2 75 type of opening OS2 75 materials
windowinwardopeningtilt & turn mechanism
windowoutwardopening
doorinwardopening
dooroutwardopening
stainlesssteel
galvanised steel
cortensteel
brass
satin-finished OT67 brass
painted galvanised steel
oxidised corten steel
waxed oxidised corten steel
polished 316L stainless steel
satin-finished 304 stainless steel
scotch brite 316L stainless steel
patinated OT67 brass
blackened 316L stainless steel
14 15
OS2 75 Museo Bailo, Treviso
system OS2 75
material corten steel
design Studiomas with Heinz Tesar
officina Due C Group srl
location Treviso - Italy
16
OS2 65
OS2 65 is an efficient and versatile system to design the desired door or window in detail with the minimum sections and the high performance features of the OS2 family. The minimal profiles are carefully designed so that, each line and each bend are essential to obtain the maximum level transparency and pureness, as well as excellent thermal and acoustic insulation.
18 19
12
3
4
6
5
7
8
1
2
3
4
5
6
7 8
OS2 65
the visible sections ranging from 27 to 62 mm are the features of the system, the thickness of the frame ranges from 58 to 72 mm, for glazing up to 40 mm. Many variants entail casements and fixed elements
wind resistance - test pressure 4
wind resistance - frame bending C
water tightness 8A
acoustic performance (with Rw per IGU 42dB) 43 (-1;-4) dB
thermal transmittance (with Ug glass 0,7 W/m2K) 1,38 W/m2K
air permeability 4
maximum achievable performance
glazing bead
glazing slot up to 40 mm
internal and external overlap
internal rebate gasket
external rebate gasket
central flipper gasket
composite structural thermal breakpolyurethanepolyamide
100 20 30 40 50OS2 65 external view corten steel OS2 65 internal view corten steel
22 23
OS2 65 type of opening OS2 65 materials
windowinwardopening
windowoutwardopening
doorinwardopening
dooroutwardopening
technical drawings p 84
stainlesssteel
galvanised steel
cortensteel
brass
satin-finished OT67 brass
painted galvanised steel
oxidised corten steel
waxed oxidised corten steel
polished 316L stainless steel
satin-finished 304 stainless steel
scotch brite 316L stainless steel
door and windowpivoting opening
patinated OT67 brass
blackened 316L stainless steel
24 25
OS2 65 Fondaco dei Tedeschi, Venice
system OS2 65
material natural brass
design OMA Rem Koolhaas
officina Gualini spa
location Venice - Italy
26
OS2 BV
OS2 BV has been designed to manufacture windows and doors that have the same moulding on the inside as well as the outside, maintaining the innovative technology and high-level performance features of OS2 systems. The beveled angled shapes of the sash externally and the glazing bead internally are symmetrical with respect to the glass, perfectly centered on the frame, hence characterizing the frame by giving the external elevation the same depth and aesthetics of the internal one.
28 29
OS2 BV
12
3
4
5
9
8
7
6
10
1
2
3
4
5
6
7
8
9 10
in the BV variant of OS2 with a symmetrical moulding on the inside and the inside of the frame, the visible sections range from 27 to 62 mm, the thickness varies based on the type of opening, from 70 to 84 mm, with glazing up to 40 mm
wind resistance - test pressure 5
wind resistance - frame bending C
water tightness 9A
acoustic performance (with Rw per IGU 42dB) 45 dB
thermal transmittance (with Ug glass 0,7 W/m2K) 1,04 W/m2K
air permeability 4
maximum achievable performance
glazing bead
glazing slot up to 40 mm
internal and external overlap
hardware groove
internal rebate gasket
external shape as the glazing bead
external rebate gasket
central flipper gasket
composite structural thermal breakpolyurethanepolyamide
100 20 30 40 50OS2 BV external view corten steel OS2 BV internal view corten steel
32 33
OS2 BV type of opening OS2 BV materials
windowinwardopeningtilt & turn mechanism
windowoutwardopening
doorinwardopening
dooroutwardopening
technical drawings p 90
stainlesssteel
galvanised steel
cortensteel
brass
satin-finished OT67 brass
painted galvanised steel
oxidised corten steel
waxed oxidised corten steel
polished 316L stainless steel
satin-finished 304 stainless steel
scotch brite 316L stainless steel
patinated OT67 brass
blackened 316L stainless steel
34 35
system OS2 BV
material painted galvanised steel
design Petra and Paul Kahlfeldt
officina Jens Schröter Metallbau GmbH
location Berlin - Germany
OS2 BV Kunsthaus Dahlem, Berlin
36
OS2 AS
The elegant sashes are integreted into a lift-and-slide door system, enhancing the facades just as much as the interior spaces. With the same minute and performant profiles, OS2 AS fits into the composition of façade arrangements in continuity with the system OS2 75, 65 and LB, maintaining aesthetic and performance features thanks to a set of dedicated components, specifically designed for the lift-and-slide technology.
38 39
OS2 AS
1
2
34
4
4
5
5
6
6
7
7
1
2
3
OS2 AS integrates the lift and slide sashes into the OS2 system with prefect continuity; ranging from 27 to 62 mm for visible sections, depths ranging from 70 to 84 mm, glazing up to 50 mm
wind resistance - test pressure 3
wind resistance - frame bending B
water tightness 5A
thermal transmittance (with Ug glass 0,7 W/m2K) 1,1 W/m2K
air permeability 4
maximum achievable performance
equal visible section on all 4 sides
glazing slot up to 50 mm
integrated slot for roller assembly
double gasket
threshold profile with integrated water drainage system
composite structural thermal breakpolyurethanepolyamide
100 20 30 40 50OS2 AS external view patinated brass OS2 AS internal view patinated brass
42 43
OS2 AS type of opening OS2 AS materials
lift-and-slide door
technical drawings p 96
stainlesssteel
galvanised steel
cortensteel
brass
satin-finished OT67 brass
painted galvanised steel
oxidised corten steel
waxed oxidised corten steel
polished 316L stainless steel
satin-finished 304 stainless steel
scotch brite 316L stainless steel
patinated OT67 brass
blackened 316L stainless steel
44 45
OS2 AS Courtyard House, California
systems OS2 AS, EBE 65
material galvanised steel ‘patinated black’
design Ken Linsteadt Architects
officina Jada Windows
location California - USA
46
OS2 LB
OS2 LB integrates the free opening in the OS2 family, in continuity with the minute characteristic profiles of the system: both with the reduced visible profiles, constant for the entire perimeter of the frame, as well as the excellent performance. By turning on the minimal hinges and sliding on the concealed rails, the folding sashes are fall one onto another or assume varying orientations, compressing and expanding the interior space.
48 49
1
2
3
4
8
5
67
OS2 LB1
2
3
4
5
6
7 8
the folding sashes have dimensions up to 100 x 290 cm, with a visible section ranging from 27 to 62 mm, depths from 70 to 84 mm, and glazing up to 50 mm. The top and bottom rails are fully concealed behind closed doors
wind resistance - test pressure 3
wind resistance - frame bending C
water tightness 5A
thermal transmittance (with Ug glass 0,7 W/m2K) 1,3 W/m2K
air permeability 4
maximum achievable performance
steel rail
internal and external overlap
external rebate gasket
glazing slot up to 50 mm
glazing bead
internal rebate gasket
composite structural thermal breakpolyurethanepolyamide
OS2 LB internal view corten steel OS2 LB opening detail corten steel
OS2 LB
52 53
3+0
3+0
5+0
5+0
2+1
2+1
3+1
3+1
4+1
4+1
3+2
3+2
5+2
5+2
3+3
3+3
OS2 LB type of opening OS2 LB materials
door andwindowinwardopening
door andwindowoutwardopening
technical drawings p 102
stainlesssteel
galvanised steel
cortensteel
brass
satin-finished OT67 brass
painted galvanised steel
oxidised corten steel
waxed oxidised corten steel
polished 316L stainless steel
satin-finished 304 stainless steel
scotch brite 316L stainless steel
patinated OT67 brass
blackened 316L stainless steel
54 55
OS2 LB Villa-Ranch, California
system OS2 LB
material galvanised steel ‘patinated black’
design Backen, Gillam and Kroeger
officina Jada Windows
location California - USA
56
OS2 40
The maximum quality in a system reduced to the essentials: OS2 40.Designed for interior design projects, the agile and lightweight tubular profiles reproduce the same image of the OS2 windows and doors in the glass partitions, creating an effect of continuity between interiors and the building envelope. Thanks to a careful and meticulous design, they feature a reduced dispersant surface, the ideal solution for climates not excessively severe.
58 59
1
2
3
4
5
OS2 401
2
3
4
5
the visible sections range from 12 to 47 mm while the depth is reduced to 42 mm, for glazing up to 15 mm. OS2 40 is the ideal system for lightweight doors and window or internal partitions.
glazing bead
glazing slot up to 28 mm
internal and external overlap
internal rebate gasket
external rebate gasket
100 20 30 40 50OS2 40 external view painted pickled steel OS2 40 internal view painted pickled steel
62 63
OS2 40 type of opening OS2 40 materials
pickled steel
painted pickled steel
doorinwardopening
dooroutwardopening
technical drawings p 108
64 65
OS2 40 Guest Pavilion, Sa Tuna
systems EBE 65, OS2 40
materials corten steel and painted pickled steel
design This is Arquitectura
officina Alumilux & Metall-lux
location Sa Tuna, Costa Brava - Spain
68
elegant, discrete complements, in harmony with the essential lines of the window and door,in the same precious materials and finishes
handles
truncated square oval rounded
70
the small profiles in front of the glass to secure it are themselves design elements of the casement that make it unique
glazing beads
rectangulargothic triangularthin gothicglazing bead
squared glazing bead
spindle
72
AC 1
221
AC 6
045
AC 2
631
AC 1
068
AC 2
629
AC 1
033
AC 2
628
AC 1
237
15
4221
21
84
14
4220
20
82
13
4040
80
15
8438
38
160
20
5012
512
5
310
12
4040
80
22.5
8438
38
160
15
4622
22
90
AC 1
221
AC 6
045
AC 2
631
AC 1
068
AC 2
629
AC 1
033
AC 2
628
AC 1
237
15
4221
21
84
14
4220
20
82
13
4040
80
15
8438
38
160
20
5012
512
5
310
12
4040
80
22.5
8438
38
160
1546
2222
90
AC 1
221
AC 6
045
AC 2
631
AC 1
068
AC 2
629
AC 1
033
AC 2
628
AC 1
237
15
4221
21
84
14
4220
20
82
13
4040
80
15
8438
38
160
20
5012
512
5
310
12
4040
80
22.5
8438
38
160
15
4622
22
90
slim and light, hinges are both technological devices and plastic elements that make up the design of windows and doors, using the same precious metals
hinges
weld-onØ 13 mm
three-wingedØ 15 mm
two-winged Ø 12 mm
77
design together
the main hubs of OS2 systems in technical drawings listed: to define every detail of the door or window, for the development on a technical/execution level of the project and for the preliminary cost estimation
78 79
77
47 47
32 47
77 77
32
42 27
27 42
77 77
77 77
70 70
47
7777
84
84 84 84
42
47
32 32 47
77
3252 47 47
77
47
77 77
47
77
2727 27
42
36 36
7777
70
77
4747
84 77 77 77
7777 7777 70
77 77 77 7770
84
32 47
47 47
47
70
47
47 47 27
12 12
19
17 15
2219
171716
15
19
PR2933 PR2942PR2903 PR2943PR2905 PR2951PR2915 PR2922 PR2932
PR2961 PR2962 PR2963 PR2965PR2952 PR2971PR2953 PR2955 PR2972
PR2974 PR2975 PR2982 PR2985 PR2954 PR2964PR2973
PR2991 PR2992 PR2993 PR2995
PR2930 PR2931
PR2503 PR2543PR2505 PR2901PR2511 PR2513 PR2515 PR2522 PR2542
PR2606 PR2629PR2607 PR2638PR2627
OS2 75
profiles and glazing beads
80 81
77
476247
1
3 42
1
1
3
3
4 5
4 5
2
2
70
27 2762 62
27 2762 62
70
47
84
27
70
47
77
OS2 75
1. 2. 3. 4.
1. 2. 3. 4. 5.
1. 2. 3. 4. 5.
inward openingsections
82 83
62 62 62
72
1
3 42
1
1
3
3
4
4
5
5
2
2
1
3 4 52
77
27 276262
84
62 62 62 62
47 4762 62
84
72
6247
72
42
70
84
47
OS2 75
1. 2. 3. 4.
1. 2. 3. 4. 5.
1. 2. 3. 4. 5.
1. 2. 3. 4. 5.
outward openingsections
84 85
64
3665
42
65
32
65
47
65
47
6467
58
54
72
47
72
47 47
65
12 12
6558 65
27
65
42
65
32
65
47
58
42
58
27
65
27
32
72
58
36
65
32
65
32
65
47
65
47
65
47
65
27
65
47
65
27
58
27
58
42
32
72
32
72
3272
17
16 19
17
19
17
15
22
15
19
OS2 65
PR2843 PR2851PR2830 PR2852PR2831 PR2853PR2832 PR2833 PR2842
PR2863 PR2865 PR2871 PR2872PR2855 PR2873PR2861 PR2862 PR2874
PR2882 PR2885 PR2891 PR2892 PR2893 PR2895PR2875
PR2606
PR2629
PR2607
PR2638
PR2627
PR2652 PR2815PR2654 PR2822PR2655 PR2664 PR2801 PR2803 PR2805profiles
glazing beads
86 87
1
3 42
1
1
3
3
4 5
4 5
2
2
47
72
1
3 4 5 62
62
72
47 4762
65
476232 62
65
6227 2762
58
47
72
47
65
62 6247 42 3672
OS2 65
1. 2. 3. 4.
1. 2. 3. 4. 5.
1. 2. 3. 4. 5.
1. 2. 3. 4. 5. 6.
inward opening and fixed pane sections
88 89
1
3 42
1
1
3
3
4
4
5
5
2
2
62 62 62
72
1
3 4 52
6227 2762
65
62 62 62 62
726247 4762
72
62
72
47
72
42
58
47
72
OS2 65
1. 2. 3. 4.
1. 2. 3. 4. 5.
1. 2. 3. 4. 5.
1. 2. 3. 4. 5.
outward openingsections
90 91
12
77
1212
77 70
27
70
32
77
32
77
32
77
3.5
7777
47 47
77 77
32
32 32 47
77
77
52 47 47
47 47 32
77 77
77 7777 77 77
77
47
77 77
47 47
13.5
1517
16 19
17
19
17
15
22
15
19
OS2 BV
PR2942B PR2943BPR2901 PR2961PR2903 PR2905 PR2915 PR2922
PR2971B PR2973B PR2982 PR2985PR2962B PR2963B PR2965
PR2628
PR2503 PR2543BPR2505 PR2511 PR2513 PR2515 PR2522 PR2542B
PR2606
PR2629
PR2607
PR2638
PR2627
profiles
glazing beads
92 93
4747
4747
47 47
47 4762
47 4762
272784
42
62 62
84
84
84
1
3 42
3 4 52
1
1
3
3
42
2
1
OS2 BV
1.
1.
1.
1.
2.
2.
2.
2.
3.
3.
3.
4.
4.
4. 5.3.
inward openingsections
94 95
4949
27
49 49
49 49
84
6284
6270 6227 27
42
1
3 42
1
3 4 52
1
32
OS2 BV
1.
1.
1.
2.
2.
2.
3.
3. 4.
4. 5.3.
outward openingsections
96 97
17
16 19
17
19
17
15
22
15
19
84
30 2525
2525
3030
30
84 84 100
72 72 72 88
47 47 2725.5
194
200194
194
170
188
179
17947 47 2725.5
OS2 AS
PR2606
PR2875
PR2975 PR2988 PR2989 PR2946 PR2983
PR2883
PR2984
PR2884
PR2986
PR2886
PR1195
PR1195R
PR2888 PR2889 PR2846
PR2629
PR2607
PR2638
PR2627
profilesfor IGU up to 50 mm
profilesfor IGU up to 38 mm
glazing beads
98 99
4747
47
5
.
3.
4
.
1
3 4 5
2
4747
194
84 84
OS2 AS
1.
2.
two-sash openingsections
exmple for IGU up to 50 mm
100 101
7.
6
.
4747
4747
98
5
.
4.
3
.1
3 4 5 6 7
2
4747
170
72 72
OS2 AS
1.
2.
four-sash openingsections
exmple for IGU up to 38 mm
102 103
77 77 77707070
47 47 47
47
14.522 12 2216
65
77 91
31 39 32 1342 42 42
17
16 19
17
19
17
15
22
15
19
OS2 LB
PR2939 GU2926
PR2972 PR2973 PR2974
PR2929 PR2938
PR2962 PR2963 PR2965 PR2927 PI2928
PR2606
PR2629
PR2607
PR2638
PR2627
profiles
glazing beads
104 105
6262
6262
62
8585
65
1
3 4 5 6 7
2
1 m
2.9 m
OS2 LB
1.
2.
3.
4.
5.
6.
7.
maximum dimensions
inward openingsections
106 107
85
62 6262
6262
62
85
1 m
2.9 m
1.
2.
3.
4.
5.
6.
7.
1
3 4 5 6 7
2
OS2 LB
maximum dimensions
outward openingsections
108 109
42
35.5
32
36
32
42
32
27
4242
47
47
33.5
33.5
35.5
35.542
32
42
47
1212
4247
42
27
42
35.5
1515
1910
12
4.5
OS2 40
PR2461 PR2462 PR2463 PR2464 PR2471 PR2474 PR2482
PR2415
PR2424 PR2425 PR2430 PR2431 PR2451 PR2454 PR2455
PR2416 PR2429
profiles
glazing beads
110 111
47 4742
36
27
56 56 56
62
47 62 47
36
36
4727
2747
27
27 27
62
1
2 3
1
3 42
OS2 40
1.
1.
1.
1.
2.
2.
2.
2.
3.
3.
3.
4.
4. 5. 6.
4. 5.3.
1
1
3
3
4
4
5
5 6
2
2
inward openingsections
112 113
47 47
36
27
36
36
4747
27
27 275656
62
47 62 47
276242
27
OS2 40
1.
1.
1.
1.
2.
2.
2.
2.
3.
3.
3.
4.
4. 5.
4. 5.3.
1
2 3
1
1
3
3
4
4 5
2
2
1
3 4 52
outward openingsections
Secco Sistemi is an Italian brand that symbolises innovation and design. It has been contributing to the evolution of the engineering of doors and windows for 70 years, inventing systems and profiles that have become benchmarks for the industry of this sector, and continuing to improve them and interpret the latest projects and trends of contemporary architecture. So far 280 profiles have been developed in 4 select metals – galvanised steel, stainless steel, corten steel and brass – and in 8 different finishes with an annual production of two million linear metres of profiled bars for 200,000 doors and windows.
Secco Sistemi spavia Terraglio 195 31022 Preganziol TV - ItalyT +39 0422 497700F +39 0422 497705www.seccosistemi.com