Ortronic Irrefutable Demonstrations
-
Upload
ortronic-technology-eng -
Category
Technology
-
view
230 -
download
0
Transcript of Ortronic Irrefutable Demonstrations
DEMONSTRATION FOR ORTRONIC® GLOBAL EXPANSION
1
Justifications of the demonstration.
First.- Tesla’s alternating electricity is used today by all people in our planet that have
electricity, even though all professionals, engineers, professors, teachers and technicians
unknown its scientific basis.
1.1. The only current knowledge of Tesla’s electricity, with the sole exception of the
Ortronic® technology, is a mathematical model of unknown author that does not
represent any alternating electricity.
1.2. The theory of the mathematical model is a set of mistakes that do not comply
with the Universal Law of energy conservation, fact justified because only use a small
percentage, less than 10 percent, of the power and energy that exists in the Tesla’s
alternating electricity.
Second.- The main mistakes of the mathematical model are:
2.1. The ideal electric motor is the only one that does not produce work.
2.2. The work of an electric motor is inversely proportional to its quality.
2.3. The maximum power KVA is an apparent power, which means false.
2.4. Reactive power KVAr is a blind and unwatted power.
2.5. The alternating current is an EFFECT produced by the electrons movement,
which moves at a speed of 300,000 (three hundred thousand) kilometers per second,
describing a circumference in its movement, as shown in figure F1.
Figure F1
2.6. The mathematical model calculates the power of the alternating electricity using
the formula W = VIcosφ, considering φ as the lag angle between voltage and current.
Third.- Ortronic® technology.
3.1. Ortronic® technology, invented and developed by me, is a revolutionary
advance on alternating electricity invented by Nikola Tesla.
3.2. Ortronic® technology is based on multiple new dimensions of alternating
electricity, unknown by all engineers and experts, which only know the
mathematical model.
DEMONSTRATION FOR ORTRONIC® GLOBAL EXPANSION
2
Fourth.- Ortronic® technology demonstrates all the errors of the mathematical model
mentioned in the second justification, with real and irrefutable demonstrations that
allow us to state the following facts:
4.1. The ideal electric motor is the one that produces the maximum work.
4.2. The work of an electric motor is directly proportional to its Q quality, as
affirmed in paragraphs 4.8 and 4.9 of this fourth justification.
4.3. KVA power is transformed into kilowatts, increasing the kilowatts of a generator
to the KVA value, ie kW = kVA. This fact represents an increase of power and energy
for free.
4.4. Reactive power KVAr is multiplied and subsequently transformed in kilowatts.
This is Ortigosa Renewable Energy (ORE), a free renewable energy.
4.5. ORE scientific basis cannot be understood by those who only know the
mathematical model.
4.6. With the knowledge of the mathematical model, it is impossible: the alternating
electricity invented by Tesla, Ortigosa Renewable Electricity (ORE) and the Electric
Power Multiplier (EPM) invented by me.
4.7. The mathematical model does not comply with the Universal Law of energy
conservation, because only use a percentage, less than 10% of existing power in
alternating electricity connected to inductive loads. This fact is demonstrated by
Ortronic® technology when ORE+EPM are used in conjunction.
4.8. The only formula that represents the power of Tesla’s alternating electricity,
ORE and EPM is the following formula: W = VIQ, being Q the quality factor resulting
from inductive loads connected to the generator, whose value is calculated by the
following formula:
𝑄 =𝑋ʟ
𝑅=
2𝜋𝑓𝐿
𝑅 R will only reach 0 in the ideal engine.
4.9. The definition of Q and its corresponding formula is from the Russian scientist
Heinrich Friedrich Emil Lenz, known as Lenz's Law.
4.10. The formula W = VIcosφ comes from the following equation:
𝑊 = 𝑉𝑚𝑎𝑥 𝐼𝑚𝑎𝑥
2[𝑐𝑜𝑠𝜑
1
𝑇∫ 𝑑𝑡 −
1
𝑇
𝑇
0
∫ 𝑐𝑜𝑠(2𝜔𝑡 + 𝜑)𝑑𝑡]𝑇
0
4.10.1. The equation is wrongly applied to alternating electricity because φ angle does
not exist, as demonstrated in the fifth justification and in the irrefutable practical
demonstrations that can be seen in the Ortronic® R&D laboratory in Madrid.
DEMONSTRATION FOR ORTRONIC® GLOBAL EXPANSION
3
4.10.2. The formula demonstrates the current lack of awareness of alternating
electricity. This fact justifies the impossibility to understand Ortronic®
technology,
which is a breakthrough in Tesla’s alternating electricity.
Fifth.- The definition of EFFECT, mentioned in the second justification, paragraph 2.5,
is impossible as we can see below.
5.1. At the standard frequency of 50 cycles per second, the time required to generate
a cycle is 0.02 seconds, but in 0.02 seconds the EFFECT covers six thousand
kilometers, and applying a simple rule of three, we have the following math conclusion:
In 1 second covers 300,000.00 kilometers.
In 0.02 seconds covers X kilometers.
Clearing the X we have: X = 300,000.00 x 0.02 / 1 = 6,000.00 kilometers.
5.2. Conclusion: All generators of alternating electricity, to generate a cycle, needs a
minimum circumference length of 6,000.00 kilometers to generate a cycle, which is the
length described by the EFFECT on its movement. It is an absurd, incongruous and
impossible conclusion.
Sixth.- Essential conditions to participate in the Ortronic® Global Expansion.
6.1. In most of my published technical documents in Internet, I clearly say that
Ortronic®
technology cannot be understood by any professional with the current
knowledge of alternating electricity. This fact is technically justified because the
Ortronic®
technology uses multiple new dimensions of the alternating electricity
unknown by professionals of current knowledge, regardless of their academic
graduation, knowledge and experience.
6.2. Our necessary conditions to accept partners in partial or territorial exploitation
of Ortronic®
technology are detailed below.
6.2.1. Demonstrate, in an irrefutable way, the differences between Ortronic®
technology and the best technology selected by potential partners.
6.2.2. Demonstrate, in an irrefutable way, that the revolutionary advances of
Ortronic®
technology are a breakthrough advance from the knowledge of alternating
electricity invented by Tesla.
6.3 As a result of all said in the two preceding paragraphs and knowing the
limitations, errors, inconsistencies and paradoxes of the mathematical model
mentioned above, which is the only current knowledge of alternating electricity, with
the only exception of Ortronic®
technology, I propose a Colloquium to discuss about
the above mentioned errors of the mathematical model, and compared with the
multiple advantages of Ortronic® technology.
DEMONSTRATION FOR ORTRONIC® GLOBAL EXPANSION
4
6.4. The protagonists of the technical Colloquium will be chosen by each of the
following parts:
6.5. Part A will consist on Juan Ortigosa García, inventor and owner of the
Ortronic® technology, of Ortronic
® trademark, of the R&D company Ortronic
Technology, S.L., plus the engineers from Ortronic Technology, S.L company that he
deems most convenient.
6.6. Part B will consist on interested potential partners and engineers elected by
them that will consider appropriate.
6.7. Parts A and B, which will be herein referred as THE PARTIES, agree by
signing this document, that the ONLY SCIENTIFIC TRUTH about the technical
contradictions that may exist between THE PARTIES will only be owned by the part
that can irrefutably prove it, through the demonstrations that will be described later.
6.8. Part A will present and discuss the multiple errors, inconsistencies and
limitations of current knowledge, based on the mathematical model, with the
obligation to demonstrate the technical differences that may exist with Part B, in the
irrefutable way described in this document.
6.9. Part B will present and discuss the errors which in its opinion may exist in
Ortronic®
technology, with the obligation to prove, in an irrefutable way, the
differences defended by Part B.
6.10. THE PARTIES agree, by signing this document, that the main application of
alternating electricity is to produce work and it can be measured without any
discrepancies between THE PARTIES.
6.11. Ortronic®
technology advantages about electricity over the mathematical model
described above, and over any other technology shown by Part B, will be irrefutably
demonstrated by measuring the amount of work produced and energy used by each
of the technologies compared in the irrefutable demonstrations provided herein.
6.12. THE PARTIES, by signing this document, agree that measures of power and
energy of all irrefutable demonstrations will be made under the following conditions:
6.12.1. All measurements of power and energy will be carried out in continuous
electricity and with the same measurement meters.
6.12.1.1. Part A, to justify the need to measure on continuous electricity, will
irrefutably demonstrate that all existing power meters of alternating electricity in
the market, have an error in the measurements about fifty percent (50%).
6.12.1.2. Part A has in his laboratory the following power meters in alternating
electricity: TEKTRONIX DPO-3054 FLUKE 435 SERIE II and HT GSC 59.
6.12.1.3. Part B, if they wish to do so, can bring all the meters referenced, or some
of them, to check that there are no errors nor tricks on the meters.
DEMONSTRATION FOR ORTRONIC® GLOBAL EXPANSION
5
6.13. The power of each of the systems used in comparative demonstrations must be at
least 15 kilowatts, so both can run with all inductive loads foreseen in the diagram.
6.14. The advantages of Ortronic® technology over the comparative technology will be
irrefutably demonstrated by measuring the difference between the total amount of work
produced and the total amount of energy used by each of the technologies used in each
demonstration.
6.15. The conclusions of the Colloquium will be recorded in video and audio,
preserving each PART a copy.
6.16- Part A proposes, as irrefutable demonstration, the installation shown in the
diagram on the next page, designed to compare the differences between the only two
technologies currently used in this type of installations, which are: PWM Inverters and
Ortronic® technology systems.
6.17.- Influences of the Paris Summit. The conclusions of the Paris Summit,
committed and accepted by all the participating countries, promise an important present
and future in the renewable energies, mainly photovoltaics, wind and ORE. This fact
justifies the importance of the proposed demonstration, which uses photovoltaic solar
panels to generate continuous electricity needed for the irrefutable demonstration. The
demonstration details are shown in the following diagram.
DEMONSTRATION FOR ORTRONIC® GLOBAL EXPANSION
6
Seventh.- Description and operation of the demonstration components.
Reference 1.- Photovoltaic generator of 15 kilowatts of power at one sun.
Reference 2.- Switcher used to change the output voltage of the photovoltaic panels at
the following values:
Position 1.- 312 volts, which is the voltage used by Ortronic® system.
Position 2.- 440 volts, which is the voltage used by PWM inverter.
Reference 3.- Siemens Contactor, 3RT10 45-1BB40 model, 22kW power and a control
coil supply voltage that is activated at 24V DC, used to connect the output of the panels
to the PWM inverter.
Reference 4.- Siemens Contactor, 3RT10 45-1BB40 model, 22kW power and a control
coil supply voltage that is activated at 24V DC, used to connect the output of the panels
to the Ortronic® system.
Reference 5.- Siemens Contactor, 3RT10 45-1BB40 model, 22kW power and a control
coil supply voltage that is activated at 24V DC, used to connect the output of the
photovoltaic panels to the resistors (Reference 6), with the only intention of measuring
the real power generated by photovoltaic panels.
Reference 6.- Set of resistors, of a minimum power equal to the PWM inverter power,
whose sole mission is to measure the real power generated by the photovoltaic panels
when are connected only to the resistors (Reference 6).
DEMONSTRATION FOR ORTRONIC® GLOBAL EXPANSION
7
Reference 7.- Single-phase PWM inverter of a minimum power of 15kW, selected by
Part B.
Reference 8.- Single-phase Ortronic® system of 24 kilowatts of power.
Reference 9.- 2 poles switcher used to switch the PWM inverter and the Ortronic®
system output, as follows:
Position 1. Connect the Ortronic® system to the inductive loads.
Position 2. Connect the PWM Inverter to the inductive loads.
References 10, 11, 12. Three water pumps of 1.5 kilowatts of power, single-phase
alternating electricity, controlled each by a switch and whose sole function is to elevate
water to a certain height. The meter for measuring the elevated volume of water is not
shown in the diagram because it will depend on where the demonstration would be
installed.
Reference 13.- Induction cooker, from BOSCH, with 5 burners controlled by switches,
with 10.5kW total power, distributed in powers of 1.8kW, 1.8kW, 3.3kW, 1.2kW and
2.4kW, whose sole objective is to heat water up to a determined temperature. The water
recipients, the isolation and the temperature meters are not shown in the diagram
because it will depend on where the demonstration would be installed.
Signed:
Juan Ortigosa García
Scientific, Inventor and Entrepreneur.
President and CEO of Ortronic Technology, S.L.
Website: www.ortronic.com
Company e-mail: [email protected]
Personal e-mail: [email protected]