Origin1500 1.5kW Solar System Panel Specifications

Your Origin system will be supplied with one of the following sets of panels:

Manufacturer Mono Or Poly Size (Watts) Panels Required To Achieve

Minimum 1500 Watts Trina Mono 190/195/200 8 Trina Poly 230 7 Sharp Poly 215/220 7

Please note all solar panels supplied are CEC accredited and compliant with IEC/EN61730 and IEC/EN61215 or IEC/EN61646. The choice of panels will be at the sole discretion of our installer subject to such matters as stock availability. Please see the following specification sheet for further details and panel specifications.

Trina Solar limitedwww.trinasolar.com

lIneAr PerfOrMAnCe wArrAnTY10 Year Product Warranty • 25 Year Linear Power Warranty

Additional value from Trina Solar’s linear warranty

Years

Gua

rant

eed

Pow

er

5

80%

90%

100%

10 15 20 25

Founded in 1997, Trina Solar (nYSe: TSl) has established itself as a leader in the solar community with its vertically integrated business model. our modules and system solutions provide clean solar power in on-grid and off-grid residential, commercial, industrial and utility-scale systems.

With more than 22 offices worldwide, Trina Solar has partnerships with leading installers, distributors, utilities and developers in all major PV markets. Trina Solar is committed to driving smarter energy choices.

Industry standard Trina Solar

The SoluTion

Module can bear snow loads up to 5400Pa and wind loads up to 2400Pa

Guaranteed power output 0~+3%

high performance under low light conditionsCloudy days, mornings and evenings

Manufactured according to international Quality and environment Management System Standards ISO9001, ISO14001

Mono Multi Solutions

TSM-DC01ATSM-DA01A

10 YeArPrODuCT wArrAnTY

25 YeArlIneAr POwer wArrAnTY

200wMAX POwer OuTPuT

15.6%MAX effICIenCY

MC4 photovoltaic connectors increase system reliabilityMC4

the original

MC4

DC

/DA

01A

.08

DC

/DA

01A

CerTIfICATIOn

TSM

_en

_nov

_201

2

CAuTion: ReAD SAFeTY AnD inSTAllATion inSTRuCTionS BeFoRe uSinG The PRoDuCT.© 2012 Trina Solar Limited. All rights reserved. Specifications included in this datasheet are subject to change without notice.

TSM-DC01A / TSM-DA01A The SoluTion

DIMenSIOnS Of PV MODule TSM-DC/DA01A

I-V CurVeS Of PV MODule TSM-195 DC/DA01A

eleCTrICAl DATA @ STC TSM-190DC/DA01A

TSM-195DC/DA01A

TSM-200DC/DA01A

Peak Power Watts-PMAX (Wp) 190 195 200

Power output Tolerance-PMAX (%) 0/+3 0/+3 0/+3

Maximum Power Voltage-VMP (V) 36.6 37.1 37.6

Maximum Power Current-iMPP (A) 5.19 5.25 5.32

open Circuit Voltage-VoC (V) 45.1 45.6 46.0

Short Circuit Current-iSC (A) 5.52 5.56 5.60

Module Efficiency ηm (%) 14.9 15.2 15.6

Values at Standard Test Conditions STC (Air Mass AM1.5, irradiance 1000W/m², Cell Temperature 25°C).Power measurement tolerance: ±3%

eleCTrICAl DATA @ nOCT TSM-190DC/DA01A

TSM-195DC/DA01A

TSM-200DC/DA01A

Maximum Power-PMAX (Wp) 140 143 147

Maximum Power Voltage-VMP (V) 33.8 34.3 34.8

Maximum Power Current-iMPP (A) 4.14 4.18 4.23

open Circuit Voltage (V)-VoC (V) 41.7 42.2 42.5

Short Circuit Current (A)-iSC (A) 4.44 4.47 4.5

noCT: irradiance at 800W/m², Ambient Temperature 20°C, Wind Speed 1m/s.Power measurement tolerance: ±3%

TeMPerATure rATIngS

nominal operating CellTemperature (noCT)

45°C (±2°C)

Temperature Coefficient of PMAX - 0.40%/°C

Temperature Coefficient of VoC - 0.30%/°C

Temperature Coefficient of ISC 0.023%/°C

PACkAgIng COnfIgurATIOn

Modules per box: 29 pieces

Modules per 40’ container: 812 pieces

Average efficiency reduction of 4.5% at 200W/m2 according to en 60904-1.

Back View

MAXIMuM rATIngS

operational Temperature -40~+85°C

Maximum System Voltage

1000V DC(ieC)/ 600V DC(ul)

Max Series Fuse Rating 10A

Recyclablepackaging

wArrAnTY

10 year Product Workmanship Warranty

25 year linear Power Warranty

(Please refer to product warranty for details)

A A

NAMEPLATE

JUNCTION BOX

G =

900±10m

m

4-Ø 9×12INSTALLING HOLE

764mm

948mm

136180.5

158

1mm

628.5mm

6-Ø 4.3 GROUNDING HOLE

12-DRAIN HOLE

MeChAnICAl DATA

Solar cells Monocrystalline 125 × 125mm (5 inches)

Cell orientation 72 cells (6 × 12)

Module dimensions 1581 × 809 × 35mm (62.24 × 31.85 × 1.37 inches)

Weight 14.9kg (32.8 lb)

Glass high transparency solar glass 3.2mm (0.13 inches)

Frame Anodized aluminium alloy

J-Box iP 65 rated

Cables Photovoltaic Technology cable 4.0mm² (0.006 inches²),900mm (35.4 inches)

Connector original MC4

0.00

1.00

2.00

3.00

4.00

5.00

6.00

0.00 10.00 20.00 30.00 40.00 50.00

Cur

rent

(A)

Voltage(V)

1000W/m2

800W/m2

600W/m2

400W/m2

200W/m2

A-A

Trina Solar limitedwww.trinasolar.com

lIneAr PerfOrMAnCe wArrAnTY10 Year Product Warranty • 25 Year Linear Power Warranty

Additional value from Trina Solar’s linear warranty

Years

Gua

rant

eed

Pow

er

5

80%

90%

100%

10 15 20 25

Founded in 1997, Trina Solar is one of the world’s leading PV companies. Since its iPo on the nYSe in 2006, Trina Solar has developed a vertically integrated business model, with in-house production of ingots, wafers, cells and solar panels in both mono and multicrystalline technologies. its manufacturing capacity for solar panels will be 2.4GW by the end of 2012, making it one of the largest solar manufacturers in the world. Trina Solar’s extensive portfolio includes panels for all kinds of applications- residential, utility, offgrid, BiPV as well as innovative system solutions.

With 20 branch offices around the world, Trina Solar is serving leading installers, distributors, utilities and developers in all major PV markets. Trina Solar is committed to driving down the cost of solar and making it more affordable for all.

Industry standard Trina Solar

The uniVeRSAl SoluTion

TSM-PC05TSM-PA05

Module can bear snow loads up to 5400Pa and wind loads up to 2400Pa

Guaranteed power output 0~+3%

high performance under low light conditionsCloudy days, mornings and evenings

Manufactured according to international Quality and environment Management System Standards ISO9001, ISO14001

Mono Multi Solutions

10 YeArPrODuCT wArrAnTY

25 YeArlIneAr POwer wArrAnTY

245wMAX POwer OuTPuT

15.0%MAX effICIenCY

Approved original MC4 Photovoltaic connector used with highest reliabilityMC4

the original

MC4

CerTIfICATIOn

TSM

_en

_Jun

_201

2

CAuTion: ReAD SAFeTY AnD inSTAllATion inSTRuCTionS BeFoRe uSinG The PRoDuCT.© 2012 Trina Solar Limited. All rights reserved. Specifications included in this datasheet are subject to change without notice.

TSM-PC05 / TSM-PA05 The uniVeRSAl SoluTion

DIMenSIOnS Of PV MODule TSM-PC/PA05

I-V CurVeS Of PV MODule TSM-245 PC/PA05

eleCTrICAl DATA @ STC TSM-230 PC/PA05

TSM-235 PC/PA05

TSM-240 PC/PA05

TSM-245 PC/PA05

Peak Power Watts-PMAX (Wp) 230 235 240 245

Power output Tolerance-PMAX (%) 0/+3 0/+3 0/+3 0/+3

Maximum Power Voltage-VMP (V) 29.2 29.3 29.7 30.2

Maximum Power Current-iMPP (A) 7.90 8.03 8.10 8.13

open Circuit Voltage-VoC (V) 37.1 37.2 37.3 37.5

Short Circuit Current-iSC (A) 8.53 8.55 8.62 8.68

Module Efficiency ηm (%) 14.1 14.4 14.7 15.0

Values at Standard Test Conditions STC (Air Mass AM1.5, irradiance 1000W/m², Cell Temperature 25°C).Power measurement tolerance: ±3%

eleCTrICAl DATA @ nOCT TSM-230 PC/PA05

TSM-235 PC/PA05

TSM-240 PC/PA05

TSM-245 PC/PA05

Maximum Power-PMAX (Wp) 167 171 174 178

Maximum Power Voltage-VMP (V) 26.3 26.4 26.6 26.8

Maximum Power Current-iMPP (A) 6.35 6.48 6.55 6.64

open Circuit Voltage (V)-VoC (V) 33.9 34.0 34.1 34.2

Short Circuit Current (A)-iSC (A) 6.95 6.97 7.04 7.10

noCT: irradiance at 800W/m², Ambient Temperature 20°C, Wind Speed 1m/s.Power measurement tolerance: ±3%

TeMPerATure rATIngS

nominal operating CellTemperature (noCT)

45°C (±2°C)

Temperature Coefficient of PMAX - 0.43%/°C

Temperature Coefficient of VoC - 0.32%/°C

Temperature Coefficient of ISC 0.047%/°C

PACkAgIng COnfIgurATIOn

Modules per box: 24 pcs

Modules per 40’ container: 672 pcs

Average efficiency reduction of 4.5% at 200W/m2 according to en 60904-1.

MAXIMuM rATIngS

operational Temperature -40~+85°C

Maximum System Voltage

1000V DC(ieC)/ 600V DC(ul)

Max Series Fuse Rating 15A

Recyclablepackaging

wArrAnTY

10 year workmanship warranty

25 year linear performance warranty

(Please refer to product warranty for details)

Back View

NAMEPLATE

JUNCTION BOX

G =

1000±10m

m

941mm

990mm

150180

12-DRAIN HOLE

4-Ø 9×12INSTALLING HOLE

812mm

165

0mm

6-Ø 4.3 GROUNDING HOLE

A A

A-A

MeChAnICAl DATA

Solar cells Multicrystalline 156 × 156mm (6 inches)

Cell orientation 60 cells (6 × 10)

Module dimensions 1650 × 992 × 40mm (64.95 × 39.05 × 1.57 inches)

Weight 19.5kg (43.0 lb)

Glass high transparency solar glass 3.2mm (0.13 inches)

Frame Anodized aluminium alloy

J-Box iP 65 rated

Cables Photovoltaic Technology cable 4.0mm² (0.006 inches²),1000mm (39.4 inches)

Connector MC4

0.00

1.00

2.00

3.00

4.00

5.00

6.00

7.00

8.00

9.00

10.00

0.00 10.00 20.00 30.00 40.00

Cur

rent

(A)

Voltage(V)

1000W/m2

800W/m2

600W/m2

400W/m2

200W/m2

215 WATT

FEATURES

• High-powermodule(215W)using156.5mm squaremulticrystalsiliconsolarcellswith 13.1%moduleconversionefficiency

• Photovoltaicmodulewithbypassdiode minimisesthepowerdropcausedbyshade

• Texturedcellsurfacetoreducethereflection ofsunlightandBSF(BackSurfaceField) structuretoimprovecellconversion efficiency:14.6%

• Whitetemperedglass,EVAresinand aweatherprooffilm,plusaluminumframe forextendedoutdooruse

• Outputterminal:Leadwirewith waterproofconnector

• Certifications:IEC61215&IEC61730

• SHARPmodulesaremanufactured inISO9001certifiedfactories

BIG POWER,SMALL FOOTPRINT

MULTI CRYSTAL SILICON PHOTOVOLTAIC MODULE WITH 215W MAXIMUM POWER

This multi crystal 215watt module features 14.6% encapsulated cell efficiency and 13.1% module efficiency. Using breakthrough technology perfected in Sharp’s space cell program, the ND-A215A2 module allows for maximum usable power per square metre of solar array.

A safe, clean, reliable source of energy, Sharp’s ND-A215A2 photovoltaic module is designed for large electrical power requirements. Based on the technology of crystal silicon solar cells developed over 50 years, this module has superb durability to withstand rigorous operating conditions and is suitable for grid connected systems.

Common applications for the Sharp ND-A215A2 include residences, office buildings, solar power stations and solar suburbs. As one of the world’s leading manufacturer of photovoltaic modules, Sharp produces an extensive line of high power modules for every electrical power requirement.

E L E C T R I C A L C H A R A C T E R I S T I C S

Cell156.5mm SquarePolycrystalline silicon

No. of Cells and Connections 60 in series

Open Circuit Voltage (Voc) 36.7V

Maximum Power Voltage (Vpm) 30.2V

Short Circuit Current (Isc) 7.82A

Maximum Power Current (Ipm) 7.13A

Maximum Power (Pm)1 Typical 215W

Encapsulated Solar Cell Efficiency ( c) 14.6%

Module Efficiency ( m) 13.1%

Maximum System Voltage DC 1000V

Series Fuse Rating 15A

Type of Output Terminal Lead Wire with MC3 Connector

I V C U R V E S

M E C H A N I C A L C H A R A C T E R I S T I C S

Dimensions 994 x 1652 x 46mm

Weight 21.0kg

A B S O L U T E M A X I M U M R A T I N G S

Parameters Rating Unit

Operating Temperature -40 to +90 °C

Storage Temperature -40 to +90 °C

Dielectric Voltage Withstood 3000 max. V-DC

D I M E N S I O N S

T E M P E R A T U R E C O E F F I C I E N T

Temp. Coefficient of Pmax

Temp. Coefficient of Voc -0.13

0.053

-0.485

V / °C

% / °C

Temp. Coefficient of Isc % / °C

Characteristic curves: Open circuit voltage /short circuit current against irradiance

(cell temperature: 25°C)

Irradiance (W/m2)

Open

circ

uit v

olta

ge V

oc (V

)

Shor

t circ

uit c

urre

nt Is

c(A

)

Isc

Voc

Characteristic curves: Current / power against voltage (cell temperature: 25°C)

Voltage (V) Current against voltagePower against voltage

Curre

nt (A

)

Powe

r (w)

1000 [W/m2]

800 [W/m2]

600 [W/m2]

400 [W/m2]

200 [W/m2]

22011

40

B AC K V I E W SIDE VIEW

A B C 994 mm 1652 mm 46 mm

A

B

C

ND-A215A2 – MAXIMUM POWER

Sharp Corporation of auStralia pty ltdABN 40 003 039 4051 Huntingwood Drive, Huntingwood, NSW 2148PO Box 6827, Blacktown, NSW 2148 Tel: (02) 9830 4600 Fax: (02) 9672 1208www.sharp.net.au

© SHARP CORP. PRINTED IN AUSTRALIA

Specifications are subject to change without notice1 (STC) Standard Test Conditions: 25˚C, 1 kW/m2, AM 1.5

Specifications are subject to change without notice Specifications are subject to change without notice

In the absence of confirmation by device specifications sheets, Sharp takes no responsibility for any defects that may occur in equipment using any Sharp devices shown in catalogues, data books, etc. Contact Sharp in order to obtain the latest device specification sheets before using any Sharp device.

• Design and specifications are subject to change without prior notice.• Colour variations to products may occur due to printing.• All information and technical details are correct as at product release date.

220 WATT

FEATURES

• High-powermodule(220W)using156.5mm squaremulticrystalsiliconsolarcellswith 13.4%moduleconversionefficiency

• Photovoltaicmodulewithbypassdiode minimisesthepowerdropcausedbyshade

• Texturedcellsurfacetoreducethereflection ofsunlightandBSF(BackSurfaceField) structuretoimprovecellconversion efficiency:15%

• Whitetemperedglass,EVAresinand aweatherprooffilm,plusaluminumframe forextendedoutdooruse

• Outputterminal:Leadwirewith waterproofconnector

• Certifications:IEC61215&IEC61730

• SHARPmodulesaremanufactured inISO9001certifiedfactories

BIG POWER,SMALL FOOTPRINT

MULTI CRYSTAL SILICON PHOTOVOLTAIC MODULE WITH 220W MAXIMUM POWER

This multi crystal 220watt module features 15% encapsulated cell efficiency and 13.4% module efficiency. Using breakthrough technology perfected in Sharp’s space cell program, the ND-220E1J module allows for maximum usable power per square metre of solar array.

A safe, clean, reliable source of energy, Sharp’s ND-220E1J photovoltaic module is designed for large electrical power requirements. Based on the technology of crystal silicon solar cells developed over 50 years, this module has superb durability to withstand rigorous operating conditions and is suitable for grid connected systems.

Common applications for the Sharp ND-220E1J include residences, office buildings, solar power stations and solar suburbs. As one of the world’s leading manufacturer of photovoltaic modules, Sharp produces an extensive line of high power modules for every electrical power requirement.

E L E C T R I C A L C H A R A C T E R I S T I C S

Cell156.5mm SquarePolycrystalline silicon

No. of Cells and Connections 60 in series

Open Circuit Voltage (Voc) 36.5V

Maximum Power Voltage (Vpm) 29.2V

Short Circuit Current (Isc) 8.20A

Maximum Power Current (Ipm) 7.54A

Maximum Power (Pm)1 Typical 220W

Encapsulated Solar Cell Efficiency ( c) 15%

Module Efficiency ( m) 13.4%

Maximum System Voltage DC 1000V

Series Fuse Rating 15A

Type of Output Terminal Lead Wire with MC3 Connector

I V C U R V E S

M E C H A N I C A L C H A R A C T E R I S T I C S

Dimensions 994 x 1652 x 46mm

Weight 21.0kg

A B S O L U T E M A X I M U M R A T I N G S

Parameters Rating Unit

Operating Temperature -40 to +90 °C

Storage Temperature -40 to +90 °C

Dielectric Voltage Withstood 3000 max. V-DC

D I M E N S I O N S

T E M P E R A T U R E C O E F F I C I E N T

Temp. Coefficient of Pmax

Temp. Coefficient of Voc -0.13

0.053

-0.485

V / °C

% / °C

Temp. Coefficient of Isc % / °C

Characteristic curves: Current / power against voltage (cell temperature: 25°C)

Voltage (V) Current against voltagePower against voltage

Curre

nt (A

)

Powe

r (w)

B AC K V I E W SIDE VIEW

A B C 994 mm 1652 mm 46 mm

A

B

C

Characteristic curves: Open circuit voltage /short circuit current against irradiance

(cell temperature: 25°C)

Irradiance (W/m2)

Open

circ

uit v

olta

ge V

oc (V

)

Shor

t circ

uit c

urre

nt Is

c(A

)

Isc

Voc

220

11

12

40

1000 [W/m2]

800 [W/m2]

600 [W/m2]

400 [W/m2]

200 [W/m2]

ND-220E1J – MAXIMUM POWER

Sharp Corporation of auStralia pty ltdABN 40 003 039 4051 Huntingwood Drive, Huntingwood, NSW 2148PO Box 6827, Blacktown, NSW 2148 Tel: (02) 9830 4600 Fax: (02) 9672 1208www.sharp.net.au

© SHARP CORP. PRINTED IN AUSTRALIA

Specifications are subject to change without notice1 (STC) Standard Test Conditions: 25˚C, 1 kW/m2, AM 1.5

Specifications are subject to change without notice Specifications are subject to change without notice

In the absence of confirmation by device specifications sheets, Sharp takes no responsibility for any defects that may occur in equipment using any Sharp devices shown in catalogues, data books, etc. Contact Sharp in order to obtain the latest device specification sheets before using any Sharp device.

• Design and specifications are subject to change without prior notice.• Colour variations to products may occur due to printing.• All information and technical details are correct as at product release date.