Orgonite Bible

5/21/2018 Orgonite Bible

1/30

1

The Orgone Generator Bible

There is a lot of information on the internet about the dangers of harmful E.L.F[microwave] frequencies that are directed at nice spiritual citizens by the corruptpolitical element of all countries via [1] cell phone towers, [2] radionics machines,

and [3] black magic spells. Yes even a black magic spell is a form of particlefrequency that departs the locality of the sender and arrives in the locality of thereceiver as a form of energy that is plainly unhealthy. Since these E.L.F[microwave] producing towers are designed for the purposes of thought control, weall need to know how to shut these devices down.

Some of these E.L.F cell phone towers are quite obvious to see, and so quite easy tospot such as the cell phone tower shown below:

But then some others are quite disguised, such as the type that seems to be a flag-pole, which again, is shown below. Believe it or not, the E.L.F tower shown below ispositioned in a school playground. How completely evil.

As we now know, the main usage of such E.L.F emitting devices is that of thethought control of the populous. Such structures emit frequencies that mimicthoughts and which are transmitted directly inside of the citizens mind sending him/


2/30

2

her a barrage of fake urges, desires, and instructions. In this manner a personmay be effectively controlled, since any decent psychologist or philosopher will tellyou that thought directs action. If I get a thought to walk in a certain direction, orto eat a certain food, or even to take a certain drug - and if I take this thought to bemy own, I will more then likely do as the thought has directed me to do.

Please examine the following quotation by a pioneer in electromagnetic mind control,which is presented on the most excellent Educate Yourself forum [http://educate-yourself.org], as it is a real eye-opener:

Man does not have the right to develop his own mind. This kind of liberalorientation has great appeal. We must electrically control the brain. Someday armies and generals will be controlled by electric stimulation of thebrain. - Dr. Jose Delgado -1974 Congressional Record, No. 262E, Vol.118.

Brother how bad can it get before we all collectively do somethingabout all this?

How many ordinary citizens take prescribed medications for apparent headaches,when there is nothing wrong with them aside from the fact that they are beingE.L.Fd by the worlds corrupt governments? How many ordinary citizens are placedwithin mental institutions because of the barrage of voices that they hear, and whichmake them seem mad if they repeat them out loud? How many mental wards haveOrgone Generators positioned in every level to isolate this factor out of thediagnostic process? How many Doctors Surgeries also have Orgone Generatorspositioned in the waiting area or the Doctors own office?

OK, I thought, it is all very well writing about the hazards of E.L.F frequencies, suchas, for example, using the town of Glastonbury in the UK as a test area for telegraph

pole mounted E.L.F crowd control devices. However, there is a simple method ofstoppingthese harmful frequencies using a counter-device that is comparatively easyto make - and very easy to use. The name of such a heroic device is the OrgoneGenerator.

Lets face it it is much better to discuss the methods of stopping something harmful,rather than endlessly discussing the very thing that ought to be eradicated in the firstplace.

One of the easiest types of Orgone Generators to make is called the TowerBuster. This is a vertical column of Orgonite 1 which contains a vertically

positioned point upwards quartz crystal in the centre of the casting. The centre-positioned quartz crystal may bewrapped with a coil of copper wire to encourage aspiral of energies that rises throughout and above the Orgone Generator.

The Tower Buster Orgone Generator Shown In Three Sizes1A 50-50 mix of hardened resin and metal particles copper, brass, aluminium and steel shavings.


3/30

3

You do not necessarily needto wrap the inside crystal with a copper coil but if youwant to you will need to wind the chosen crystal eleven times in an anti-clockwisemanner working from the bottom of the crystal to the top-most point, whilst lookingat your chosen quartz crystal from the bottom [see below]. Wrapping a quartz crystalin such a manner will amplify the crystals Piezoelectrical Abilities.

A Copper Coil-Wrapped Quartz Crystal With Eleven Windings

To make a Tower Buster, you would use a plastic drinking beaker typemoldandpour your mixture of Orgonite[resin, hardener, and metal shavings] in a series of 10-20 mm layers until your mold is completed. To hold the centre-positioned quartzcrystal in place I use a spare piece of spare copper wire stuck to the bottom of mymold with some sticky-tape until the top-most point of the crystal has been set in theresin [at which point the holding wire and tape may be removed] see below:

As the pours progress, you will get to the point when the quartz crystal is covered bythe Orgonite mixture. Until the crystal is completely covered you will need to bevery careful that the metal particles DO NOT TOUCH the windings of the coppercoil that surrounds the crystal. Since, if they do, you will get a short that will counterthe effect of the Piezoelectric Crystal. There are two ways of avoiding this. One wayis to cover the windings of your crystal with a clear glue and wait until it has setbefore positioning the crystal. The other way is to make sure that you only drop metalshavings into the outside-most part of the mold, whilst the quartz crystal is being

covered. You will need to leave one to two hours between each pour to enablecorrect hardening of the resin.
http://www.the-infoshop.com/study/bc8031_piezoelectric_crystals.htmlhttp://www.the-infoshop.com/study/bc8031_piezoelectric_crystals.htmlhttp://www.the-infoshop.com/study/bc8031_piezoelectric_crystals.htmlhttp://www.the-infoshop.com/study/bc8031_piezoelectric_crystals.html


4/30

4

When you have completed your layered mold, give the hardened resin a day or two tocompletely set, and then remove the finished Tower Buster from the mold. Youwill also need to glue some felt to the bottom to stop the Orgone Generator fromscratching which-ever surface you decide to position it upon.

Following this, you just have one very last thing to do, and that is to program thecrystal with your mind. By this I mean that you must tell the crystal what it will do,which in this case will be to aid in the collection of dead energy at the bottom of thedevice, to aid the channelling of this collected energy upwards through the Orgonite,and to aid in the pushing of fresh Orgone out of the top of the device. Bear in mind

here that quartz crystals act in the same manner as your home Computer System,meaning that they are as programmable as a RAM Memory chip [which is alsomade from silica]. Also be aware that Computer System silica chips areprogrammed when an electronic instruction arrives inside the crystal. In the case ofyour home Computer System the electronic instruction is a stream of electro-magneticbinary information sent by the C.P.U [brain of the Computer]. And in the case of yourOrgone Generator, the electronic instruction is an electro-magnetic thought-formsent by your mind [which amounts to your own biological C.P.U]. As you can SEE,the method of programming is exactly the same for both a Home Computer Systemsilica chip, and for an Orgone GeneratorQuartz Crystal. You ARE a Computer.

Your finished device will look like the completedTower Bustershown below:

A Completed Tower Buster


5/30

5

The designer of this Tower Buster Orgone Generator device, Mr. Don Croft,maintains that it will be capable of shutting down all harmful E.L.F frequencies for aspherical radius that will completely engulf your house.

*********************************************************************

So, let us have a look at just what this mixture of organic and inorganicmaterials known as Orgonite really is.

Orgonite was coined by Karl Welz and refers to a class of materials which arecomposed of a mixture of metallic particles suspended in an organic medium plus aninorganic substance in a 50/50 ratio. Orgonite takes dead orgone [DOR] and convertsit into orgone [OR] which by definition is full of living energy. Orgone is the namegiven to Life Force, Chi, bio-energy by Wilhelm Reich. Orgone is a type of energythat defies many of the laws of Newtonian physics and is considered to be the energythat creates and heals life. The metals used are those of [1] copper, [2] brass, [3]

aluminium, and [4] sometimes steel. The metal in the mix can be ANY metal, butvery fine particles, like the brass grindings from a key-making machine. Very largepieces, are less effective than B.B.s and spiral shavings and particles from a machineshop. Copper works a little better than aluminium, gold works a little better thancopper, but availability of materials and costs are a more important consideration, inmy opinion. The non organic part is the resin that holds the metals in suspension.Epoxy resin, polyester resin, and boat-building fire-glass are the popular mediums.

Or, to put it in a nut-shell, Orgonite has the ability to attract harmful E.M.Fs[DOR] and to transform these particle-waves into brand-new Orgone [OR]which can then be used by the owners thought processes to create a more

suitable reality structure. Here, who-ever attacks your living-space with an E.L.F[microwave] attack will only provide you with energy to be re-cycled ~ as youseefit.

*********************************************************************

OK, so we now have the knowledge to protect our entire living-space with theTower Buster device. But, what about completely shutting down the harmfulE.M.Fs emitted by an entire cell phone tower for a spherical range of about1,200 metres. Such a device would not only protect yourself, but it would also stopall E.M.Fs that could harm [thought-control] anyone else in the protected vicinity.

Well, the name of this particular device is the Holy Hand Grenade, which was alsodesigned by Mr. Don Croft, and which can also be found on the most excellentEducate Yourself forum managed by Ken Adachi [http://educate-yourself.org].

The process of molding and creating a Holy Hand Grenade is very similar to theway in which we just made the Tower Buster [above], except that [1]this device isbigger, and [2] there are 5 coil-wrapped quartz crystals inside it, with two EgyptianLost Cubit coils of copper adding a further boostto the device.

Let us start with a picture of the device , so we can SEE just what a Holy HandGrenade looks like.
http://educate-yourself.org/dc/http://educate-yourself.org/dc/http://educate-yourself.org/dc/http://educate-yourself.org/dc/


6/30

6

The Holy Hand Grenade 5 Quartz Crystals

In this case, the mold that we will be using will be a plastic pudding bowl, or

something similar, which will give you an idea of the finished size of the device.

We will start our construction of the Holy Hand Grenade by making a 10 mmpour into the top of the pudding bowl mold with a 50-50 mixture of resin andmetal shavings [see below].

Next we will introduce one of the two Egyptian Lost Cubit Coils which will makethe pure Orgone energy spiral out of the top of the Holy Hand Grenade device.

A Lost Cubit Coil is a piece of copper wire that measures 596.6714 mm or23.491". Now, Egyptian Lost Cubit Coils may be multiplied to suit their usage,meaning that with a large device we can use a measurement of [1]2 x 596.6714 mmor 23.491", or [2]3 x 596.6714 mm or 23.491", or [3]which ever multiplication suitsyour sizing. Since the Holy Hand Grenade device we are building here is quitelarge I will recommend a measurement of 2 x 596.6714 mm ~ which = 1193.3428mm.

Take a piece of copper wire 1193.3428 mm long [or as close as you can measure it]and fold it exactly in half. Then, bend it to form a double spiral which will appear asrunning anti-clockwise starting from the inside of the spiral and working outwards

when looking down upon it [see below]. I tend to hold the centre of the spiral with apair of long-nosed pliers whilst I am winding the coil around and around.


7/30

7

Next, push in the centre of your spiral so that it takes on the shape shown below:

Then, place your Lost Cubit Coil on top of your first pour so that it spirals anti-clockwise working from the centre to the outside when looking down into the mold[see below]. Next, set it into a thin layer of resin only [we dont want to short out thecoil with the metal particles] that will just cover it. You may have to support thespiral with some sticky-tape to hold it in position [see below].

When the 5 mm pour of pure resin has set, wrap one of the five quartz crystals youhave acquired to make the Holy Hand Grenade with eleven turns of copper wire,working from the bottom of the crystal in an anti-clockwise direction towards thepoint [see below].


8/30

8

Next, you will need to place this wrapped crystal point down [facing the top of themold] and support it inside the centre of the spiral in readiness for the next pour [seebelow].

Make sure that none of the copper windings on the crystal touch the Lost CubitCoil, and hold it in place with a spare piece of copper wire which you will have totape to both the crystal and the outside of the bowl.

You can now make your next pour, which will set the end of the crystal in place.When you do this only sprinkle the metal particles around the outside of the mold,making sure that they do not short out [touch] either [1]the Lost Cubit Coil, or [2]the coil wrapped crystal [see below].

Next, fill the mold with resin and metal shavings in 10-20 mm layers until you areabout 40 mm from the bottom of the mold. You will need to stop at that point, as you

will be fitting the four other coil wrapped quartz crystals into the base of the devicebefore completing it. Again, be very careful not to short out the Lost Cubit Coil or


9/30

9

the coil-wrapped quartz crystal meaning only sprinkle metal shavings around theedge of the mold [see below].

You can now fit the remaining four quartz crystals to the Holy Hand Grenadedevice before continuing the pouring process to finish it.

First, you will need to coil-wrap the remaining four quartz crystals with copper wire.Us usual, make eleven turns around each crystal working from the bottom in ananti-clockwise direction and winding the copper towards the top-most point [seebelow].

Next, place the four coil-wrapped crystals on the bottom of your mold so that thepoints face the centre crystal [hopefully you acquired the correct length of crystal],and so that each crystal represents one of the four directions [see below].


10/30

10

All we have to do now is to completely cover the remaining four crystals with resinand metal particles. As usual stay away from the coil windings with the metalparticles, so that you do not short out the crystals. If you have done your maths rightyou will find that when the four bottom-most crystals are completely covered, thatyou will have 5 mm of depth left in the mold still available to allow the placement of

the bottom-most Lost Cubit Coil [see below].

Ok, you are now ready to place the bottom-most Lost Cubit Coil in the mold beforethe final pour. This Lost Cubit Coil will remain flatand will cover the four crystalsthat we have just set in the mold.

Again, take a piece of copper wire 1193.3428 mm long [or as close as you canmeasure it] and fold it exactly in half. Then, bend it to form a double spiral which willappear as running anti-clockwise starting from the inside of the spiral and workingoutwards when looking down upon it[see below]. Hold the centre of the spiral with apair of long-nosed pliers whilst winding the coil around and around.

Now you can place this final [double-size] Lost Cubit Coil in the mold, so that itappears as running anti-clockwise starting from the inside of the spiral and workingoutwards when looking down upon it [see below]. Hopefully, you have learnedenough to realise that we do not want this final Lost Cubit Coil shorting out on anymetal particles. By this I mean that you should have made sure that your last pour leftno protruding metal particles sticking out of the top of your mold


11/30

11

Let us have top down look into the bottom of the mold, so that we can view theplacement of the final [double] Lost Cubit Coil.

If everything has worked out fine, you should now have your final [double] LostCubit Coil placed inside the mold, with about a spare mm or two of fill left to cover

this coil. When we cover the final Lost Cubit Coil we will only use pure hardenedresin, as we do not want to short out the coil.

Once we have made the final pour, all we need to do is to leave the mold someplacewarm for one to two days to let it completely cure. Then we can remove the HolyHand Grenade from the mold, and glue some felt to the bottom, to prevent thedevice from scratching the surface that it is positioned upon if it is to be used insidea building. If we are to bury it secretlyto shut down a cell phone towers thought-control capabilities, then the felt on the bottom is NOT necessary.

The finished Holy Hand Grenade should now look something like this [see

below]:

The Completed Holy Hand Grenade


12/30

12

I should also point out here that the designer of these devices, Mr. Don Croft, needspeople to GIFT these devices if your finances can allow it. By this I mean that youcould [1] give such a device to someone that is suffering an E.L.F [microwave]attack, [2]bury such a device near to a Cell Phone Tower to prevent it from affectingthe thinking of the local residents, [3]bury such a device near to a negative building

such as a Masonic Temple, [4]bury such a device near to an accident black spot.

In the case of burying a Holy Hand Grenade near to a Masonic Temple, you willeffectively recycleall of their spells [dead Orgone energy DOR] into pure Orgoneenergy [OR], meaning that all the Freemasons practising black magic in the templewill lend all their mental energies towards making the world a much nicer place whether they like it or not . Now, as far as White Magic goes, gifting a HolyHand Grenade and burying it close to a Masonic Temple, or a cell phone tower, isabout as White as Magic can get. So what are you waiting for ~ get on with it

Holy Hand Grenade Version No 2 The Mega Mushroom

I do not need to explain the complete construction of this variation to the design ofthe Holy Hand Grenade, as it is almost identical to the original invented by DonCroft that we just had a look at.

This variation takes the name of the Mega-Mushroom, and was invented bymyself! All you need to do, is to add a leg onto the bottom of the mold, bypositioning the cut off bottom of an orange-squash cordial plastic drink bottle on thebottom of the finished Holy Hand Grenade. Then mastic [bathroom sealer glue] itin place to stop resin leakage when we make the add-on pour[s]. Once again, fill theleg with 10 mm pours of resin and metal shavings [Orgonite] until the leg iscomplete. You may place an extra quartz crystal inside the centre of this leg, andyou may also place an extra Lost Cubit Coil at the very bottom of the leg too.

The finished result looks like this:

A Completed Mega Mushroom


13/30

13

*********************************************************************

So, we have now learnt how to make a Tower Buster Orgone Generator that cansurround our living-space with a globe of pure transformed Orgone; and we have alsolearnt how to make a larger device called a Holy Hand Grenade that is capable of

producing a protective sphere that has a diameter of about 1,200 meters, and whichcan stop a cell phone tower from affecting our thought processes.

But, what about making an amplified device that can attack an Army or Navy remote-viewer [PSI-core], or that has the ability to attack a major demonic entity.

Well, luckily for you Don Croft, working with his hugely psychic wife Carol hasindeed designed such a device, which takes on the name of the Succour-Punch forthe portable version, or the Power Wand for the larger version.

Well examine both types of amplified Orgone Generator one at a time beginning

with the Succour Punch.

*********************************************************************

The Succour Punch/ Power Wand

A Succour Punch [SP] is the name Don Croft gave to a quartz crystal that has amobius coilwrapped around it in a certain way so that a knot is created for eachturn of the coil as it passes around the crystal. This knot creates a node which booststhe desired action. When you pulse a 15 Hz signal through a mobius coil, it sets up a

chaos field which interacts with the crystal to create scalar waveswhich can then beprogrammed with your thoughts. In this manner, forces are set in motion both onthe third and fourth dimensional levels.

To use the SP, you turn it on and hold it over your heart chakra and tell it what youwant it to do. If you are being harassed by ELF microwave transmissions, you tell it tocreate a perfect shield against any sort of energy that is beamed to you from anydimensional plane, intended to cause you harm [in any way or form], by any sentientbeing or thought form directing that negative energy towards you. You then tell it totransmute any negative directed energy that penetrates your shield, into lifeenhancing energy that invigorates and energizes you in a positive manner. You may

also instruct the Succour Punch crystal to beam back to the party [or parties, orthought forms] who are responsible for sending this negative energy to you, the samenegative energy, but in a form that the offending parties are defenceless to shieldagainst.

You may ask the Succour Punch crystal to return the offending energy at theincreased factor of 1000% for as long as the clowns are beaming the energy at you.You may ask that any remote viewer, human or otherwise, be blocked from remoteinfluencing or remote viewing you or during psychic scans. You may ask that anynegative alien being should be blocked who attempts to attach any sort of life


14/30

14

draining cord or device [in any dimension] to your chakras or interferes with you inany way, etc2.

Dowsing has told Don Croft that a medium sized crystal can be programmed for about35 tasks. Some crystals can handle more programs, despite their size. Since each

crystal is an individual with unique attributes. Larger crystals can usually handle moreprogramming and do things more powerfully than smaller crystals, but they all workon the same principle. The crystal can work withoutthe pulsing circuit, but the powerfactor is much, much lower. According to Don Croft, negative aliens like theDraconians, [or black magical spying meditators] cannot stand to be in theenvironment of the SPpulsing circuit and want to exit.

A Selection Of Different Sized Powered [Harmonically Amplified] SuccourPunch Crystals Showing The Jack-Plug To Attack The Harmonic Device

Another interesting side benefit of the SP crystal is its apparent ability to block thetransmission of high tech surveillance equipment. Don Croft discovered that theArmy, Navy and Police Forces could not monitor his movements or his conversations when the SPpulser unit was turned on.

A Succour Punch [Harmonically Boosted] Crystal Showing The Attached Pulser Unit

2Also, do not overlook the power of askinghigher spiritual forcesto help youovercome any form of

psychic attack or harassment. Michael Relfe has succeeded mightily in this regard by using the powerof thought and focused intent to help overcome anything the bad guys throw at him or his wife,Stephanie.
http://educate-yourself.org/dc/spblocksburveillance17jan05.shtmlhttp://educate-yourself.org/dc/spblocksburveillance17jan05.shtmlhttp://educate-yourself.org/dc/spblocksburveillance17jan05.shtmlhttp://educate-yourself.org/dc/spblocksburveillance17jan05.shtml


15/30

15

To make one of theseOrgonitesurrounded Succour Punch Crystals we will need tostart with a large sized quartz crystal. Perhaps 4-6 inches log, and 1.5-2 inches indiameter. Only this time we will not wrap the quartz crystal with eleven windings ofcopper wire.

Instead, we will [1] first pre-wrap the same quartz crystal with eleven windings ofpure Silver Wire that runs both clockwise and anti-clockwise [see below]; we will[2]mid-wrap the quartz crystal with a knotted Mobius Coil to focus the harmonics;and then we will [3]final-wrap the same quartz crystal with a 3 X Lost Cubit Coilto hold the harmonics in a containment field within the quartz crystal.

Let us begin with the initial Silver Wrap, which serves to ensure that the amplifiedharmonics that we will fire through the quartz crystal utilises the entire length of thecrystal [see below].

A Silver Wrapped Quartz Crystal

With the point facing to the left, and using the top-most point as a referencelocation [see above] start in the middle of the crystal, imagine you are looking downthrough the top-most point towards the bottom, and wind the silver wire eleventurns from the middle towards the bottom in a clock-wise direction. Using the samereference [looking down on the top-most point] now wind another length of silverwire from the centre of the crystal in an anti-clockwise direction towards the top-most point. Make sure that the two pieces of silver wire DO NOT TOUCH in the

middle.

When you are done with the silver wire, cover it with super-glue, or some othersuitable clear glue. This will serve to [1] strengthen the delicate silver-wire [2]holdthe two coils in place, [3]stop any chance of a break in the silver wire when applyingthe following two processes, and [2]stop anything shorting out on the silver wirewinds.

Our next task is to wrap the same crystal with a mobius coil, which is a continuous[un-broken] 4-strand twisted coil [with two long ends] that will connect a female 2.5mm jack-plug socket that we will use to connect the finished device to either [1]a

Pulser Unit, [2]a Personal Computer sound card, or [3]a C.D. walkman type devicewith the necessary frequencies stored on a C.D.


16/30

16

To make a mobius coil, refer to the following guide:

The Items you will need:

1 cordless drill

1 spool of 30 guage alluminum wire from Radioshack, comes in red, blue and whitein 50ft. Do not get the magnet wire that is copper. The copper is very stiff whilewrapping also the enamel insulator easily scrapes off causing minute shortages.

1 crystal.

First select a length of wire that will be appropriate for the size of crystal. Very smallcrystals will need only three feet of wire, larger ones with a diameter of 1 inch orlarger will need 20-25 feet or more, the hole spool for giant crystals.

Fold the wire in half, then fold that in half again. Basically folding the wire into

quarters. Be sure to leave the two ends long, so you can fit a jack-plug.

Now take the end where both ends are bent, place them into the locking chuck of yourcordless drill. The easiest way to keep them together evenly in the drill is by starting asmall twist to hold them together.


17/30

17

Set the drill direction so that it will remove a screw [leftwards rotation]. With yourother hand, hold onto the end with the two leads. Make sure you keep good tensionwhile the drill is rotating. This will minimise irregularities. If the wire is longer thanyour arm span have someone help hold it or clamp it to a sturdy stand.

You'll know the wire is correctly wound when the thread angles are at 45 degrees.

Hold your crystal and wire like so. You will be doing a counter clock wire wrap thatworks upward.

Here is how you start your first knot.


18/30

18

Notice that the knot goes over, down, up-around. It's basically a square knot. Keepthis knot a little loose because you'll need the space for the remaining knots.

Now repeat the process. You'll notice the wire working upward. While the knot keepsgetting larger. Start pulling the wire tight.

Here is how it looks going around a third time. Each time you start a new knot you

start just before the last one. Remember to keep the wraps tight. This will ensure youdon't have any wires overlapping on the back.


19/30

19

Here is the finished result. You'll notice that the knot's start right after the last one

begun. Use glue to hold wires in place, a hot glue gun or goop [P.V.A.] works great.Strip the ends and you got your self an jack-plug female socket connection. Beaware that covering the mobius coil wrapped quartz crystal in P.V.A. or some othersuitable glue BEFORE fitting the final copper restraining coil over the top of it willprevent any shorts, meaning that this part is very important.

If you notice the knots getting to difficult to overlap then start another row the sameway as the first. Pull the excess just a little above the first mobius wrap, wrap the wirearound counter clock-wise then do the knot and keep repeating as many times asneeded. It's basically a simple pattern that keeps repeating.

* The diagrams above show a mobius coil on a crystal that has NOT been pre-wrapped with silver wire. The silver wire wraps are optional, but they DO improvethe end result. Personally, I ALWAYS pre-wrap the quarts crystal with silver wirefirst.

A quartz crystal with a finished mobius coil wrapped around it.

Before encasing our quartz crystal in Orgonite [resin and metal shavings], all weneed to do is to cover our glue-coated mobius coil with a final copper coil wrap.This final wrap is, once again, optional but DOES serve to restrain the harmonicswe are going to fire through the crystal. Without the final copper coil it is more

likely that we can lose a little of the harmonic focus that is intended to be pumpedthrough the quartz crystal.


20/30

20

Once again the Egyptian Lost Cubit coil length will be used. Meaning cut yourself alength of copper wire that is 1193.3428 mm long [or as close as you can measure it],only this time DO NOT fold it in half, simply wind it anti-clockwise working from thebottom of the quartz crystal towards the top-most point in a manner that covers themobius coil [see below]:

A quartz crystal pre-wrapped with silver wire, mid-wrapped with a mobius coil,and final-wrapped with a Lost Cubit Coilof copper wire to contain the field.

All you have to do now, is to set your wrapped quartz crystal into some Orgonite[resin and metal particles], and then connect a female 2.5 mm jack-plug socket ontoyour two long ends of the mobius coil [see below]:

A completed Orgonite surrounded Succour Punch frequency gun.


21/30

21

As far as the frequency generator is concerned, you can order one from the originaldesigner of these devices, Don Croft. The frequency generator [Super Compactversion] ships at an $80 donation plus $6 shipping. The ordering name you need touse is that of the super compact SP Pulser, and the link to request one is below:

[email protected]

As for me, I made a modification to the Succour Punch frequency gun so that itwould run in STERIO[Don Crofts original runs in MONO with one quartz crystal].To accomplish this, all I did was to employ TWO mobius coil wrapped quartzcrystals [one on top of the other] and each with its own mobius coil. Doing this gaveme FOUR long ends exiting from the TWO mobius coils, meaning that I could fita STEREO female jack-plug socket. In this way I can use the device at homerunning from a Personal Computer sound card, or as a portable device running from aC.D. Walkman [set on repeat loop] with the necessary frequencies burned onto aC.D. Personally I think that if you are suffering a governmental microwave assault on

your well-being, that you do NOT want to be trusting the Royal Mail to orderanything from overseas [I live in the UK].

If you want to design your own device that runs on stereo [you can produce TWOfrequencies at once this way, or simply double the strength of one frequency] thenyou will need to download a specific piece of software that allows you to produce anyfrequency.

The necessary software is called the NCH Tone Generator, which can bedownloaded in its demo format at:

http://www.nch.com.au/action/

If you do want to make it into the full version you can either pay for it, or simplysearch for the crack on the internet [which IS available]. Personally, I rarely usemoney for anything but then thats me

As for which frequencies to emply, there is a listin at:

http://educate-yourself.org/nch/Freqchart1.shtml

And also at:

http://educate-yourself.org/nch/Freqchart2.shtml

If you want me to impart a few choice frequencies right here and now, then I will. Theinfamous frequency that Don Croft recommends for preventing black magicians,government PSI agencies, and stand-alone remote viewers from seeing you is a 15Hz square wave this is the harmonic of the year 2012. And, bearing this in mindyou will plainly see that any life-form that is destined NOT to make it as far asEarths transition into 5D is NOT going to like that frequency that equates to theNew Age when it is fired at them now.

Further interesting frequencies are:
mailto:[email protected]://www.nch.com.au/action/http://educate-yourself.org/nch/Freqchart1.shtmlhttp://educate-yourself.org/nch/Freqchart2.shtmlhttp://educate-yourself.org/nch/Freqchart2.shtmlhttp://educate-yourself.org/nch/Freqchart1.shtmlhttp://www.nch.com.au/action/mailto:[email protected]


22/30

22

Alpha 7.83 Hz~ Earth Resonance presently. For Invention, Creativity, & EnergyAlpha 7.0 Hz ~ To Enhance ESP [Extra Sensory Projection], & Intuition

Alpha 12.0 Hz~ For Cantering Yourself And Balance, & Greater HarmonyTheta 3.5 HZ ~ For Super Learning, Especially Of Languages, & Retention

Theta 6.3 Hz ~ For Super Learning, To Boost Memory, & Mental ConfidenceBeta 14.1 Hz ~ For Efficiency In Daily Activities: Emotional, Mental, & Physical

4.9 Hz~ Induce relaxation, meditation & deeper sleep528 Hz~ Mend DNA and strengthens the cell wall to boost immunity [Dr Rife]

441 Hz~ The King's Chamber Frequency, clears a chaotic room [Dr Rife]30 KHz[square wave] ~ cures AIDS

Use square waves or pulse waves for all of these frequencies.

And if you want a fuller listing of frequencies, just run a search on your preferredweb browser for a listing known as the Clark Frequencies. I did, and found a *.pdf[Adobe acrobat] document with thousands of frequencies included.

*********************************************************************

I should also point out that there is a very simple version of the Succour Punch thatis just a [1]silver wire pre-wrapped, [2]mobius coil mid-wrapped, and [3]copper coilfinal-wrapped version with no surrounding Orgonite. To be honest, you couldsimply wrap a mobius coil around a plain quartz crystal [see below]. Though,personally, I like to build the best and most powerful device that I can but thenthats me

A very simplistic Succour Punch ready for connection to a MONO frequencygenerator.

A Succour Punch becomes a Power Wand simply by making it more powerful.The original designer of these devices, Don Croft, calls the basic model which is NOTsurrounded in Orgonite and which runs in MONO a Succour punch. He also callsa bigger version with two [or more] crystals] a Power Wand. I guess my ownmodified version that runs in STEREO using two mobius coil wrapped quartz crystalswould fit into the Power Wand category.


23/30

23

I also made a very large version with FOUR 1 inch by four inch quartz crystalsrepresenting the FOUR DIRECTIONS feeding [and positioned below] into a fist sizedquarts crystal above it. The four smaller crystals were diagonally positioned, meaningall their respective top-most points were lined up with the centre of the bottom ofthe fist sized crystal above them. All five of these crystals were pre-wrapped with

silver, mid-wrapped with a mobius coil, and final-wrapped with a Lost Cubit coil ofcopper [see below]. I guess this one would be called something like a Mega, MegaWand!

The Mega-Mega Wand

I should add that I also fitted a spiralled Lost Cubit coil to the bottom of the mold[which was too tricky to draw here!].

All four of the smaller lower-positioned quartz crystals are wired-up in series to makeone channel of sound, with the fist-sized top-most crystal making the otherchannel. This device runs from either [1] a Personal Computer sound card, or [2] aC.D. Walkman with the required frequencies burned onto a C.D. I guess that an MP3player would also work, but you run the risk of losing the memory if the batteries run

out!

*********************************************************************

OK, we have learned to make a variety of powered and non-powered OrgoneGenerators, but what about a massive device that is literally capable of altering theclimate. To be honest the corrupt world governments employ a similar series ofdevices to manufacture weather conditions. And, if they can do it, then I would saythat we ought to be doing this to. This particular device is called the Chembuster asit has the capabilities to break up poisonous Chem Trails [chemical clouds droppedon purpose by corrupt governments from planes to control citizens by chemicalmeans]. The following section is in the words of Ken Adachi, the manager of the mostexcellent Educate Yourself Internet Forum [http://educate-yourself.org].


24/30

24

The Chembuster

The first Chembuster [CB] I ever saw was the one Don Croft sent me back in 2002.The very first day I set it up on the patio, we had a black helicopter visit us at 2 AM,hovering loudly about 150 feet overhead, and shining the brightest search lightimaginable-going around and around our place- in an obvious attempt to bothintimidate and video tape us inside our home using special infrared technology [whichis standard equipment today, even on local police helicopters]. A chembuster willproduce an intensely blue orgone field that is easily seen on any infrared radarweather map. You probably won't get a visit from a black helicopter when you set upyour CB because there are too many CB's out there now and they generally don'tbother with the helicopter routine anymore, but you can still see the blue orgone fieldcantered over your house if you go to a weather web site and click on the infraredmaps for your area. You will be surprised to see that the orgone field extends outward

for many miles.

It usually takes a couple of weeks for a new CB to acclimate to the local environment,so you may not see dramatic results with chemtrails right away, but just hang in therefor 2 or 3 weeks and you will begin to notice things. The more heavily laid thechemtrails in your area, the longer it takes for the CB to gear up to the task ofdispering them. The larger the CB resin/metal chip matrix base, the larger thediameter of the pipes used, the longer the length of pipes used, the more and larger

crystals used, the more coils used, etc. means a more powerful punch of orgonetransmutation delivered by the CB. The bare bones basic chembuster is made with a 2


25/30

25

gallon plastic bucket and six, 1 inch copper pipes. The six upper pipe extensions arefive feet long and plug into a one inch copper pipe coupler connected to the shortpipes embedded within the resin/metal chip matrix base. The upper extension pipeassembly is held in place and parallel using a wooden template. The six pipes areevenly spaced out in the bucket in a perfect circle which, when viewed overhead, will

give you two sets of 3 pipe triangles that intersect each other as in the Star of Davidconfiguration. Setting crystals [inside the pipes] in the Star of David configuration canhave some very powerful effects both on the etheric and physical planes.

For crystals, I use the longest and widest Lemurian Seed Crystals [long thin quartzpoints] that I can fit inside the pipe. I always include a 3X Royal Cubit 14 gauge coilat the bottom of every 2 gallon Chembuster [see below 1st] and a 4X Royal Cubit coilat the bottom of the 5 gallon Chembuster. If you wish to add the option of more coilsor more crystals, you can make your selection fro m the CB Options list below.

The two gallon CB is made in a two gallon plastic bucket and uses six, 1 inch copperpipe extensions [shown below].


26/30

26

You can leave the CB in the plastic bucket for easy portability or remove it and burythe CB directly into the ground. Plants will always grow more vigorously in thepresence of a CB and burying a unit directly into the ground will improve plantgrowth even more dramatically. Some people put them in the centre of their gardenand are amazed to see the improvement in plant vigour. Many people have reported

that spraying a mist of water on the CB on a daily basis will tend to bring rain [if yourarea needs it]. It's not a guaranteed thing, but many have reported this phenomena.

The base unit deal includes six 1 inch copper couplers and a painted woodenalignment template that goes near the top.

You can either pick up your own 1 inch copper pipes at a local building supply centresuch as Home Depot or Loew's [American department stores], or you can order the

whole enchilada from me. If you get your own pipes, ask the salesman to cut a tenfoot length of pipe in half to give you two 5 foot lengths [buy a total of six, 5 footpipes]. You also have the options of adding one more pipe to a centre location [totalof seven pipes], adding more crystals, adding SP Pulser crystals, adding more coils,and adding other ingredients to the 2 gallon base unit by choosing from the CBOptions list below.

CB Options Described

If you really want to go for the Big Bang in sky repair, you'll want to consider addingsome of the extra CB options listed below which could include a [A] seventh

pipe/Lemurian crystal in the centre and the [B] 2X Royal Cubit inch spiral tubing.


27/30

27

You can get the inch spiral tubing with or without the seventh pipe. I prefer to fillthe inch spiral tubing with Raymon Grace water, but other substances are possible.Other options to consider are the [C] Lateral coil-wrapped DT crystals to connect thetwo Star of David triangle pipe configurations.

You can see the first set of Lateral Crystals installed here

and the second set installed here


28/30

28

and a large side view [235K] here]

Another choice is to embed one, two, or three [D] Succour Punch [SP] crystals withMobius coil and 4X Royal Cubit coils directly into the resin/metal matrix of the CBbefore the final pour for the purpose of pulsing the entire CB at 15 Hz with a [E] SPPulser [or an mp3 or C.D. device] attached to the base of a pipe and rubber hooded forrain protection.

You could also [F] Silver Wrap3the SP crystal [1] before installing the mobius coil[see above]

3One coil winds clockwise and the other counter-clockwise for exactly 11 turns. The two coils do nottouch each other [http://educate-yourself.org/dc/silverwrapspcrystal.shtml].


29/30

29

[2] and wind a [G] 4X Royal Cubit coil [3] around the outside of the SP crystal formost of its length, but leave the tip of the crystal exposed in order to protrude above

the resin/metal matrix after the final pour. Three SP crystals are seen installed here,but one or two SP crystals will still pulse the entire CB.

Multiple SP crystals could be wired in either parallel or series. When wired inparallel, the leading edge of the square-wave pulse from the SP Pulser would entereach SP crystal at the same moment in time and would cause each crystal to pulse insymmetrical unison. However, if wired in series, the pulse would have to travel fromcrystal A to B to C and due to the inductive reactance [resistance] of the mobius coils,there would be a slight time lag in the leading edge of the pulse that enters each

crystal. The sum effect would cause a rotation of the magnetic fields rising and fallingin each crystal. In theory, at least, this would cause a vortex-like rotation of theorgone field and would act to "stir" the ether and encourage movement as achieved byTrevor James Constable with his rotating 'Spider' units used to break up DOR ethericstagnation [http://educate-yourself.org/dc/orgonegenindex.shtml].


30/30

30

*********************************************************************

Please visit the world wide webs best Second Coming internet sites. Inparticular please visit:

[1] www.fourwinds10.comManaged by Patrick Bellringer.

[2] The Sign Of Jonah that was spoken about in the famous Dead Sea Scrollsis written under the pen name of John Grau [me], and is available to read at :

http://www.fourwinds10.com/NewsServer/ArticleDetails.php?ArticleID=3387Ifanything goes wrong with that site, I will post The Sign up on ALL P2Ps soon

so look out for it.

[3] www.fourwinds10.com/journals/index.htmlHere you will find The Dead SeaScrolls listed as Phoenix Journal 2; an expansion to the Dead Sea Scrolls,penned by Mankinds God-head ATON listed as Phoenix Journal 27; the

Governing Rules Of The Demonic Hierarchy, listed as Phoenix Journal 5;

and a series of Seven Pleiadian Scrolls listed as Phoenix Journals 30-36.

[4] www.universe-people.comAn Eastern-block web-site with a wealth ofAscended Master information. In particular check the socio-economic

philosophies of the inhabitants of the Planet Iarga on this site. The link for thisparticular philosophy is:

http://www.universe-people.com/english/download3_e.htm

[5] www.abundanthope.net/mb1a/Managed by Candace Frieze, the officialchannel for Christ Michael during Earths 5D transition stage.

[6] www.returnoflight.com/A site dedicated to the energies of the Creator God

Heru HIMSELF

*********************************************************************

Brought To You By The One That Was Jonah

Have a Nice Day
http://www.fourwinds10.com/http://www.fourwinds10.com/NewsServer/ArticleDetails.php?ArticleID=3387http://www.fourwinds10.com/journals/index.htmlhttp://www.universe-people.com/http://www.universe-people.com/english/download3_e.htmhttp://www.universe-people.com/english/download3_e.htmhttp://www.abundanthope.net/mb1a/http://www.returnoflight.com/http://www.returnoflight.com/http://www.abundanthope.net/mb1a/http://www.universe-people.com/english/download3_e.htmhttp://www.universe-people.com/english/download3_e.htmhttp://www.universe-people.com/http://www.fourwinds10.com/journals/index.htmlhttp://www.fourwinds10.com/NewsServer/ArticleDetails.php?ArticleID=3387http://www.fourwinds10.com/

Orgonite Bible

Documents

Transcript of Orgonite Bible