ORDIC FIBERGLASS, INC. · Fabricators of Quality Fiberglass Products for the Electric Utility...
8
Fabricators of Quality Fiberglass Products for the Electric Utility Industry 21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762 Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.com Page 19 08/17 ORDIC FIBERGLASS, INC. Cabinets, 3 Phase Sectionalizing 15kV 200Amp Three Phase Sectionalizing Cabinets Features: • Rust free fiberglass construction. • Nordic cabinets are produced of fire-retardant resin and a combination of chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength. • The exterior is applied with a Munsell green gel-coat, which contains UV stabilizer and provides superior weather-ability and resistance to ultraviolet attack. • P-107 stainless steel locking system with a silicon bronze penta-head bolt provides double locking. • Stainless steel continuous hinge connects the lid to the cabinet. • One stainless steel self locking cam arm and prop arm hold the lid open. • Optional copper grounding is available. • Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity Standard. ND-315-MG-2A5A-X-X: • One-piece design for the ND-315, ground sleeve is part of the cabinet. • Hot-dipped galvanized MP-2A5A mounting plate (also available in stainless steel) accommodates up to three 2, 3 or 4 pt., 15kV 200A loadbreak junctions with U-straps. • In-line parking allows for parking stand-offs or 2 pt. feedthroughs on either side of the mounting plate. ND-2315-MG-2A5A-X-X: • Two-piece design for the ND-2315. It can also be used for pad-mount applications without the ground sleeve. • Hot-dipped galvanized MP-2A5A mounting plate (also available in stainless steel) accommodates up to three 2, 3 or 4 pt., 15kV 200A loadbreak junctions with U-straps. • In-line parking allows for parking stand-offs or 2 pt. feedthroughs on either side of the mounting plate. Benefits: • The cabinet’s eyebolts allow the lineperson to simply hook-up the direct burial cabinet, position it over the cables, and place it in the excavated area. 15kV 200Amp Three Phase Sectionalizing Cabinets Parking Top Width Top Depth Cabinet Height Hot Stick Operating Depth Recommended Burial Depth ND-315-MG-2A5A-X-X In-Line 70.5” 17.5” 48” 15.5” Finish grade approximately 6” below locking system. ND-2315-MG-2A5A-X-X In-Line 70.5” 17.5” 53” 15.5” ND-315-MG-2A5A-X-X ND-2315-MG-2A5A-X-X
Transcript of ORDIC FIBERGLASS, INC. · Fabricators of Quality Fiberglass Products for the Electric Utility...
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.com Page 1908/17
ORDIC FIBERGLASS, INC.Cabinets, 3 Phase Sectionalizing
15kV 200Amp Three Phase Sectionalizing Cabinets Features:• Rust free fiberglass construction.• Nordic cabinets are produced of fire-retardant resin and a combination of
chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
• The exterior is applied with a Munsell green gel-coat, which contains UV stabilizer and provides superior weather-ability and resistance to ultraviolet attack.
• P-107 stainless steel locking system with a silicon bronze penta-head bolt provides double locking.
• Stainless steel continuous hinge connects the lid to the cabinet.• One stainless steel self locking cam arm and prop arm hold the lid open.• Optional copper grounding is available.• Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity Standard.
ND-315-MG-2A5A-X-X: • One-piece design for the ND-315, ground sleeve is part of the cabinet.• Hot-dipped galvanized MP-2A5A mounting plate (also available in stainless
steel) accommodates up to three 2, 3 or 4 pt., 15kV 200A loadbreak junctions with U-straps.
• In-line parking allows for parking stand-offs or 2 pt. feedthroughs on either side of the mounting plate.ND-2315-MG-2A5A-X-X:
• Two-piece design for the ND-2315. It can also be used for pad-mount applications without the ground sleeve.
• Hot-dipped galvanized MP-2A5A mounting plate (also available in stainless steel) accommodates up to three 2, 3 or 4 pt., 15kV 200A loadbreak junctions with U-straps.
• In-line parking allows for parking stand-offs or 2 pt. feedthroughs on either side of the mounting plate.Benefits:
• The cabinet’s eyebolts allow the lineperson to simply hook-up the direct burial cabinet, position it over the cables, and place it in the excavated area.
15kV 200Amp Three Phase Sectionalizing Cabinets
Parking Top Width
Top Depth
Cabinet Height
Hot Stick Operating
Depth
Recommended Burial Depth
ND-315-MG-2A5A-X-X In-Line 70.5” 17.5” 48” 15.5” Finish grade approximately
6” below locking system.
ND-2315-MG-2A5A-X-X In-Line 70.5” 17.5” 53” 15.5”
ND-315-MG-2A5A-X-X
ND-2315-MG-2A5A-X-X
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.comPage 20 08/17
ORDIC FIBERGLASS, INC.15/25kV 200Amp Three Phase Sectionalizing Cabinets Features:• Rust free fiberglass construction.• One-piece design, ground sleeve is part of the cabinet.• Nordic cabinets are produced of fire retardant resin and a combination
of chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
• The exterior is applied with a Munsell green gel-coat, which contains UV stabilizer and provides superior weather-ability and resistance to ultraviolet attack.
• P-107 stainless steel locking system with a silicon bronze penta-head bolt provides double locking.
• Optional copper grounding is available.• One stainless steel self locking cam arm and prop arm hold the lid open.• Stainless steel continuous hinge connects the lid to the cabinet.• Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity Standard.
ND-250-MG-101-X-X:• ND-250-MG-101-X-X is used for pad-mount installations.• Cabinet anchor brackets (4x) are shipped attached to the mounting plate
for pad mounting.• Concrete anchoring hardware is not included.
ND-330-MG-101-X-X, ND-350-MG-101-X-X, ND-360-MG-101-X-X:
• Hot-dipped galvanized MP-101 mounting plate (also availabe instainless steel) accom-modates up to three 2, 3, or 4 pt., 15/25kV 200A loadbreak junctions with U-straps, except Cooper 35kV. (ND-330-MG-101-X-X is designed for 15kV 200Amp LBJ’s only)
• Does not accommodate 200A taps off of the 600A junctions. (Includes ND-250)• Below parking on the MP-101 allows for parking stand-offs or 2 pt.
feedthroughs on either side of the mounting plate.Benefits:
• The cabinet’s eyebolts allow the lineperson to simply hook-up the direct burial cabinet, position it over the cables, and place it in the excavated area.
15/25kV 200Amp Three Phase Sectionalizing Cabinets
Parking Top Width
Top Depth
Cabinet Height
Hot Stick Operating
Depth
Recommended Burial Depth
ND-330-MG-101-X-X (15kV only) Below 53.5” 26.5” 36” 19” Finish grade approximately
6” below locking system.
ND-350-MG-101-X-X Below 53.5” 26 48” 23”
ND-360-MG-101-X-X Below 53.5” 26” 54” 23”
ND-250-MG-101-X-X Below 53.5” 26” 34.5” 23” Pad-Mount
ND-330-MG-101-X-X
ND-350-MG-101-X-X
ND-360-MG-101-X-X
ND-250-MG-101-X-X
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.com Page 2108/17
ORDIC FIBERGLASS, INC.
Features: ND-430-MG-101-X-X, ND-450-MG-101-X-X• Rust free fiberglass construction.• One-piece design for the ND-430 and ND-450, ground sleeve is part of the
cabinet.• Nordic cabinets are produced of fire-retardant resin and a combination of
chopped glass spray-up and hand lay-up using woven roving glass rein-forcement, which adds greatly to their strength.
• The exterior is applied with a Munsell green gel-coat, which contains UV stabilizer and provides superior weather-ability and resistance to ultraviolet attack.
• P-107 stainless steel locking system with a silicon bronze penta-head bolt provides double locking.
• Optional copper grounding is available.• Two stainless steel self locking cam arms hold the lid open.• Stainless steel continuous hinge connects the lid to the cabinet.• Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity Standard.
• Hot-dipped galvanized MP-101 mounting plate,(also available in stainless steel) accommodates up to three 2, 3 or 4 pt., 15/25/35kV 200A and 600A loadbreak junctions with U-straps, except for Cooper 35kV.
• Optional hot-dipped galvanized MP-10135 mounting plate, (also available in stainless steel) accommodates up to three 2, 3, or 4 pt., 35kV 600Amp dead-break junctions with U-straps from Cooper.
• Accommodates 200A taps off of the 600A junctions.• Below parking allows for stand-offs or feed throughs to be installed. • ND-450 has an optional 18” or 36” high extension for extra cable bending
radius.Benefits:
• The cabinet’s four eyebolts allow the lineperson to simply hook-up the cabinet, position it over the cables, and place it in the excavated area for a simple installation.
15/25/35kV 600Amp Three Phase Sectionalizing Cabinets
15/25/35kV 600Amp Three Phase Sectionalizing Cabinets
Parking Top Width
Top Depth
Cabinet Height
Hot Stick Operating
Depth
Recommended Burial Depth
ND-430-MG-101-X-X Below 68.5” 29.5” 53” 25.5” Finish grade approximately
6” below locking system.
ND-450-MG-101-X-X Below 68.5” 29.5” 64.5” 29
ND-430-MG-101-X-X
ND-450-MG-101-X-X
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.comPage 22 08/17
ORDIC FIBERGLASS, INC.
15/25kV 200Amp Three Phase Sectionalizing Cabinets
Parking Top Width
Top Depth
Cabinet Height
Hot Stick Operating
Depth
Recommended Burial Depth
ND-552436-MG-101-X-X Below 55.5” 23” 36” 23.5”
Finish grade approximately
6” below locking system.
ND-552436-MG-152-X-X Above 55.5” 23” 36” 23.5”
ND-552436-MG-PA58-X-X Above 55.5” 23” 36” 21.5”
ND-552442-MG-101-X-X Below 55.5” 23” 42” 23.5”
ND-552442-MG-152-X-X Below 55.5” 23” 42” 23.5”
ND-552442-MG-PA58-X-X Above 55.5” 23” 42” 23.5”
ND-552454-MG-101-X-X Below 55.5” 23” 54” 23.5”
ND-552454-MG-152-X-X Above 55.5” 23” 54” 23.5”
ND-552454-MG-PA58-X-X Above 55.5” 23” 54” 21.5”
Features: ND-5524 Series• Rust free fiberglass construction.• One-piece design for the ND-5224 Series cabinets, ground sleeve is part
of the cabinet.• Nordic cabinets are produced of fire-retardant resin and a combination of
chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
• The exterior is applied with a Munsell green gel-coat, which contains UV stabilizer and provides superior weather-ability and resistance to ultraviolet attack.
• P-107 stainless steel locking system with a silicon bronze penta-head bolt provides double locking.
• Optional copper grounding is available.• Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity Standard.• Hot-dipped galvanized MP-101 mounting plate accommodate up to three 2, 3
or 4 pt., 15/25kV 200/600A loadbreak junctions with U-straps. • Does not accommodate 200A taps off of the 600A junctions.• MP-101 below parking allows for stand-offs or feed throughs to be installed. • MP-152, PA58, PB58 mounting plates accommodate up to three 2, 3 or
4 pt., 15/25kV 200A loadbreak junctions with U-straps. • The sliding rail on the 152 and PA58 allows for stand-offs or feed throughs to
be installed on the stainless steel above parking stands, or the below parking stands on the PB58.Benefits:
• The cabinet’s four eyebolts allow the lineperson to simply hook-up the cabinet, position it over the cables, and place it in the excavated area for a simple installation.
15/25kV 200Amp Three Phase Roto-Cab Sectionalizing Cabinets
ND-552436-MG-101-X-X
ND-552436-MG-152-X-X
ND-552436-MG-PA58-X-X
ND-552442-MG-101-X-X
ND-552442-MG-152-X-X & ND-552442-MG-PA58-X-X
ND-552454-MG-152-X-X & ND-552454-MG-PA58-X-X
ND-552454-MG-101-X-X
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.com Page 2308/17
ORDIC FIBERGLASS, INC.15/25kV 200 and 15/25/35kV 600Amp Three Phase Roto-Cab Sectionalizing Cabinets
Two-Piece 15/25kV 200Amp Three Phase Sectionalizing Cabinets
Parking Top Width
Top Depth
Cabinet Height
Hot Stick Operating
Depth
Recommended Burial Depth
ND-2562448-MG-101-X-X Below 56” 24” 48” 25”
Finish grade approximately 6”
below locking system.
ND-2562448-MG-152-X-X Above 56” 24” 48” 24”
Two-Piece 15/25/35kV 600Amp Three Phase Sectionalizing Cabinets
ND-2722850-MG-168-X-X Above 72” 28” 50” 28”
Features:• Rust free fiberglass construction.• Two-piece design for the ND-2562448 and ND-2722850.• Nordic cabinets are produced of fire-retardant resin and a
combination of chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
• The exterior is applied with a Munsell green gel-coat, which contains UV stabilizer and provides superior weather-ability and resistance to ultraviolet attack.
• P-107 stainless steel locking system with a silicon bronze penta-head bolt provides double locking.
• Optional copper grounding is available.• Two stainless steel self locking cam arms hold the lid open.• Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity Standard.
ND-2562448-MG-101-X-X & ND-2562448-MG-152-X-X:• Hot-dipped galvanized MP-101 & MP-152 mounting plates accommodates up to three 2, 3,
or 4 pt., 15/25kV 200A loadbreak junctions with U-straps. • Does not accommodate 200A taps off the 600A junctions.• MP-101 below parking allows for stand-offs or feed throughs to be installed.• MP-152 above parking allows for stand-offs or feed throughs to be installed.• MP-152 plate can be rotated horizontally for easy junction installation.
ND-2722850: • Hot-dipped galvanized MP-168 mounting plate accommodates up to three 2, 3, or 4 pt.,
15/25/35kV 200A loadbreak junctions. It also accommodates 200A taps off of the 600A junctions.
• MP-168 above parking allows for stand-offs or feed throughs to be installed.• MP-168 mounting plate can be rotated horizontally for easy junction installation.
Benefits:• The cabinet’s four eyebolts allow the lineperson to simply hook-up the cabinet, position it
over the cables, and place it in the excavated area.
ND-2722850-MG-168-X-X
ND-2562448-MG-101-X-X
ND-2562448-MG-152-X-X
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.comPage 24 08/17
ORDIC FIBERGLASS, INC.
Features:• Rust free fiberglass construction.• One-piece design, ground sleeve is part of the cabinet.• Nordic cabinets are produced of fire-retardant resin and a
combination of chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
• The exterior is applied with a Munsell green gel-coat, which contains UV stabilizer and provides superior weath-er-ability and resistance to ultraviolet attack.
• P-107 stainless steel locking system with a silicon bronze penta-head bolt provides double locking.
• Optional copper grounding is available.• Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity
Standard.ND-6830 Series:
• Aluminum PA71 or PB71 mounting plate accommodates up to three 2, 3 or 4 pt., 15/25/35 kV 200A or 600A junc-tions with U-straps (accommodates 200A taps), including Cooper 35 kV 200A/600A junctions.
• Accommodates 200A taps off of the 600A junctions.• The sliding rail on the PA71 or PB71 allows for stand-offs or
feed throughs to be installed on the stainless steel parking stands either above (PA71) or below (PB71).
• ND-683054 has an optional 18” or 36” high extension for extra cable bending radius.Benefits:
• The cabinet’s four eyebolts allow the lineperson to simply hook-up the cabinet, position it over the cables, and place it in the excavated area.
15/25/35kV 600Amp Three Phase Roto-Cab Sectionalizing Cabinets
15/25/35kV 600Amp Three Phase Sectionalizing Cabinets
Parking Top Width
Top Depth
Cabinet Height
Hot Stick Operating
Depth
Recommended Burial Depth
ND-683042-MG-PA71-X-X Above 68.5” 30” 42” 26.5” Finish grade approximately
6” below locking system.
ND-683054-MG-PA71-X-X Above 68.5” 30” 53.5” 26.5”
ND-683042-MG-PA71-X-X
ND-683054-MG-PA71-X-X
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.com Page 2508/17
ORDIC FIBERGLASS, INC.ND-325 (Standard) & (Multi-Point Junction Cabinet)
Features:• Rust free fiberglass construction and stainless steel hardware.• One-piece design, ground sleeve is part of the cabinet.• Nordic cabinets are produced of fire-retardant resin and a combination of chopped glass
spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
• The exterior is applied with a Munsell green gel-coat, which contains UV stabilizer and provides superior weather-ability and resistance to ultraviolet attack.
• P-107 stainless steel locking system with a silicon bronze penta-head bolt provides double locking.
• Optional copper grounding is available.• Two stainless steel self locking cam arms hold the lid open.• Stainless steel continuous hinge connects the lid to the cabinet.• Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity Standard.
Standard: ND-325-MG-2C5A-X-X:• Hot-dipped galvanized MP-2C5A mounting plate in the ND-325, (also availabe in
stainless steel) accommodates up to three 2, 3, or 4 pt., 15/25kV 200A loadbreak junctions with U-straps.
• Does not accommodate 200A taps off of the 600A junctions.• In-line parking on the MP-2C5A allows for parking stand-offs or 2 pt. feedthroughs on
either side of the mounting plate.Multi-Point: ND-325-MG-S102CX-X-X, ND-325-MG-X-X-X
• Accommodates a variety of 5 and 6 way 15/25/35kV multiple point junctions with 4” in-terface spacing from a variety of manufacturers including Elastimold, Hubbell, G&W, and Cooper linear junctions. (Check out our website for junction accommodations)
• Junctions without parking stands can either be mounted to a mounting plate or mounted to the cabinet’s fiberglass mounting board with their own mounting bracket.
• Multi-Point junctions allow for different configurations of 200A and 600A interfaces for either load or dead break elbows.
• Does not accommodate 200A taps off of the 600A junctions.Benefits:
• The cabinet’s four eyebolts allow the lineperson to simply hook-up the cabinet, position it over the cables, and place it in the excavated area.
ND-325 Cabinet
Mounting Plate Parking Stands
Mounting Board Width
Hot Stick Operating
Depth
Cabinet Height
ND-325-MG-2C5A-X-X 2C5A In-Line 85” 22” 48”
ND-325-MG-S102CX-X-X S102CX Below 85” 22” 48”
ND-325-MG-X-X-X Based on Junction Below 85” 22” 48”
ND-325-MG-X-53594-W3B
ND-325-MG-S102CX-6252B-W3B
ND-325-MG-2C5A-X-X
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.comPage 26 08/17
ORDIC FIBERGLASS, INC.ND-2722850 (Standard) & (Multi-Point Junction Cabinet)
Features:• Rust free fiberglass construction and stainless steel hardware.• Two-piece design.• Nordic cabinets are produced of fire-retardant resin and a combination of
chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
• The exterior is applied with a Munsell green gel-coat, which contains UV stabilizer and provides superior weather-ability and resistance to ultraviolet attack.
• P-107 stainless steel locking system with a silicon bronze penta-head bolt provides double locking.
• Optional copper grounding is available.• Two stainless steel self locking cam arms hold the lid open.• Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity Standard.
Multi-Point: ND-2722850-MG-268-X-X:ND-2722850:
• Accommodates a variety of 15/25/35kV multiple point junctions with 4” interface spacing from a variety of manufacturers including Elastimold, Hubbell, and G&W. (Check out our website for junction accommodations)
• Hot-dipped galvanized MP-268 mounting plate accommodates up to three 2, 3, or 4 pt., 15/25/35kV 200A loadbreak junctions. It also accommodates 200A taps off of the 600A junctions.
• MP-268 above parking allows for stand-offs or feed throughs to be installed.• MP-268 mounting plate can be rotated horizontally for easy junction
installation.Benefits:
• The cabinet’s four eyebolts allow the lineperson to simply hook-up the cabinet, position it over the cables, and place it in the excavated area.
Two-Piece 15/25kV 200Amp Three Phase Multi-Point Sectionalizing Cabinet
Parking Top Width
Top Depth
Cabinet Height
Hot Stick Operating
Depth
Recommended Burial Depth
ND-2722850-MG-268-X-X Above 72” 28” 50” 28”
Finish grade approximately 6”
below locking system.
ND-2722850-MG-268-425C2R-W3B
ND-2722850-MG-268-525C3-W3B
ND-2722850-MG-268-325CB2-W3B
ND-2722850-MG-268-X-W3B
